NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, December 5, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?TradeName=Blazemaster&MaterialType=CPVC&

Did you know?

The new NSF Product Listings website is available for NSF/ANSI 14-Certified products with a new look and feel. Click on "Try it Now" to check it out!
NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Georg Fischer LLC 
9271 Jeronimo Road
Irvine, CA 92618 
United States 
610-252-7355
Visit this company's website

Facility : Bakersfield, CA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+++ [G]		  
CPVC 4120		  
+GF+ HARVEL BLAZEMASTER®		  
ASTM F442
3/4" - 3" SDR 13.5 

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


Facility : Irvine, CA

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+++ [G]		  
CPVC 4120		  
+GF+ HARVEL BLAZEMASTER®		  
ASTM F442
3/4" - 3" SDR 13.5 

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


 
IPEX Incorporated 
3 Place Du Commerce, Suite 101
Île-Des-Soeurs 
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : # 1 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement+++ [1] [3] [G] CPVC PW BlazeMaster BM-3 Cement ASTM F493
Solvent Cement+++ [1] [3] [G] CPVC PW BlazeMaster BM-4 "One-Step" ASTM F493
Solvent Cement+++ [1] [3] [G] CPVC PW BlazeMaster BM-5 One Step Low VOC CPVC Cement ASTM F493
Solvent Cement+++ [1] [3] [G] CPVC PW BlazeMaster BM5 One Step Cement Heavy Bodied Red Low VOC ASTM F493 

! Product is Certified whether or not it bears the U.P. Code Mark.
* Cements Certified to CSA B181.1 must be yellow in color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either the AquaRise Primer or IPEX 70 Purple/Clear Primer.
[3] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


 
IPEX USA LLC 
3 Place Du Commerce, Suite 101
Verdun, QC H3E 1H7 
Canada 
514-769-2200
Visit this company's website

Facility : Madison, AL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Fittings+++		  
CPVC		  
IPEX, Blazemaster or TFP		  
ASTM F438

Caps Sch 40
3/4" - 1 1/4"  

Couplings Sch 40
3/4" - 1 1/4"  

Bushings Sch 40
1 x 3/4"   1 1/4" x 3/4"   1 1/4" x 1"  

90° Elbow Sch 40
3/4" - 1 1/4"  

45° Elbow Sch 40
3/4" - 1 1/4"  

Reducing 90° Elbow
1" x 3/4"  

Tee Sch 40
3/4" - 1 1/4"  

Cross Sch 40
3/4" - 1 1/4"  

Reducing Coupling Sch 40
1" x 3/4"  

Reducing Tee Sch 40
3/4" x 3/4" x 1"   1" x 3/4" x 3/4"   1" x 3/4" x 1"   1" x 1" x 3/4"  
1 1/4" x 1" x 3/4"   1 1/4" x 1" x 1"   1 1/4" x 1" x 1 1/4"   1 1/4" x 1 1/4" x 3/4"  
1 1/4" x 1 1/4" x 1"  

Reducing Cross Sch 40
1" x 1" x 3/4" x 3/4"  

Grooved Adapter Sch 40
1 1/4"   

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and
    including Commercial Hot (180° F).

Fittings+++		  
CPVC		  
IPEX, Blazemaster or TFP		  
ASTM F439

Caps Sch 80
1 1/2" - 3"  

Couplings Sch 80
1 1/2" - 3"  

Bushings Sch 80
1 1/2" x 3/4"   1 1/2" x 1"   1 1/2" x 1 1/4"   2" x 3/4"  
2" x 1"   2" x 1 1/4"   2" x 1 1/2"   2 1/2" x 1"  
2 1/2" x 1 1/4"   2 1/2" x 1 1/2"   2 1/2" x 2"   3" x 2"  
3" x 2 1/2"  

90° Elbow Sch 80
1 1/2" - 3"  

45° Elbow Sch 80
1 1/2" - 3"  

Tee Sch 80
1 1/2" - 3"  

Cross Sch 80
1 1/2" - 3"  

Grooved Adapter Sch 80
1 1/2" - 3"   2 1/2" x 76.1 mm  

Reducing Tee Sch 80
1 1/4" x 1 1/4" x 1 1/2"   1 1/2" x 1 1/4" x 3/4"   1 1/2" x 1 1/4" x 1"   1 1/2" x 1 1/2" x 3/4"  
1 1/2" x 1 1/2" x 1"   1 1/2" x 1 1/2" x 1 1/4"   2" x 2" x 3/4"   2" x 2" x 1"  
2" x 2" x 1 1/4"   2" x 2" x 1 1/2"   2 1/2" x 2 1/2" x 1"   2 1/2" x 2 1/2" x 1 1/4"  
2 1/2" x 2 1/2" x 1 1/2"   2 1/2" x 2 1/2" x 2"   3" x 3" x 1 1/2"   3" x 3" x 2  
3" x 3" x 2 1/2"   

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and
    including Commercial Hot (180° F).

Fittings+++		  
CPVC		  
IPEX, Blazemaster or TFP		  
CSA B137.6

Caps Sch 40
3/4" - 1 1/4"  

Couplings Sch 40
3/4" - 1 1/4"  

Bushings Sch 40
1 x 3/4"   1 1/4" x 3/4"   1 1/4" x 1"  

90° Elbow Sch 40
3/4" - 1 1/4"  

45° Elbow Sch 40
3/4" - 1 1/4"  

Reducing 90° Elbow
1" x 3/4"  

Tee Sch 40
3/4" - 1 1/4"  

Cross Sch 40
3/4" - 1 1/4"  

Reducing Coupling Sch 40
1" x 3/4"  

Reducing Tee Sch 40
3/4" x 3/4" x 1"   1" x 3/4" x 3/4"   1" x 3/4" x 1"   1" x 1" x 3/4"  
1 1/4" x 1" x 3/4"   1 1/4" x 1" x 1"   1 1/4" x 1" x 1 1/4"   1 1/4" x 1 1/4" x 3/4"  
1 1/4" x 1 1/4" x 1"  

Reducing Cross Sch 40
1" x 1" x 3/4" x 3/4"  

Grooved Adapter Sch 40
1 1/4"  

Caps Sch 80
1 1/2" - 3"  

Couplings Sch 80
1 1/2" - 3"  

Bushings Sch 80
1 1/2" x 3/4"   1 1/2" x 1"   1 1/2" x 1 1/4"   2" x 3/4"  
2" x 1"   2" x 1 1/4"   2" x 1 1/2"   2 1/2" x 1"  
2 1/2" x 1 1/4"   2 1/2" x 1 1/2"   2 1/2" x 2"   3" x 2"  
3" x 2 1/2"  

90° Elbow Sch 80
1 1/2" - 3"  

45° Elbow Sch 80
1 1/2" - 3"  

Tee Sch 80
1 1/2" - 3"  

Cross Sch 80
1 1/2" - 3"  

Grooved Adapter Sch 80
1 1/2" - 3"   2 1/2" x 76.1 mm  

Reducing Tee Sch 80
1 1/4" x 1 1/4" x 1 1/2"   1 1/2" x 1 1/4" x 3/4"   1 1/2" x 1 1/4" x 1"   1 1/2" x 1 1/2" x 3/4"  
1 1/2" x 1 1/2" x 1"   1 1/2" x 1 1/2" x 1 1/4"   2" x 2" x 3/4"   2" x 2" x 1"  
2" x 2" x 1 1/4"   2" x 2" x 1 1/2"   2 1/2" x 2 1/2" x 1"   2 1/2" x 2 1/2" x 1 1/4"  
2 1/2" x 2 1/2" x 1 1/2"   2 1/2" x 2 1/2" x 2"   3" x 3" x 1 1/2"   3" x 3" x 2  
3" x 3" x 2 1/2"   

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and
    including Commercial Hot (180° F).

Pipe+++		  
CPVC 4120		  
IPEX or Blazemaster		  
ASTM F442
3/4" - 3" SDR 13.5 

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and
    including Commercial Hot (180° F).

Pipe+++		  
CPVC 4120		  
IPEX or Blazemaster		  
CSA B137.6		 

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and
    including Commercial Hot (180° F).


 
IPS Corporation 
17109 South Main
P.O. Box 379 
Gardena, CA 90248 
United States 
310-898-3351
Visit this company's website

Facility : Gardena, CA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement§ +++ [2] [G] CPVC PW, DWV, SW Weld-On BlazeMaster ECO Red Heavy Bodied CPVC ASTM F493
Solvent Cement§ +++ [2] [G] CPVC PW, DWV, SW Weld-On BlazeMaster ECO Red Heavy Bodied CPVC ASTM D2846
Solvent Cement+++ [2] [G] CPVC PW, DWV, SW Weld-On® Blazemaster® ASTM F493
Solvent Cement+++ [2] [G] CPVC PW, DWV, SW Weld-On® Blazemaster® ASTM D2846 

! Product is Certified whether or not it bears the U.P. Code Mark.
* Cements Certified to CSA B181.1 must be yellow in color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld-On® P-68 Clear Low-VOC Primer for PVC/CPVC, Weld-On® P-70 Clear Low-VOC
    CPVC/PVC Primer, or Weld-On® P-70 Purple Low-VOC CPVC/PVC Primer.
[4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Weld-All™ 8151[X] Clear Primer.
[5] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings assembled using the cement without a primer.
[7] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing  of pipe and fittings assembled using the cement
    and P-75 Aqua-Blue Low VOC primer.
[8] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On P-68 or P-70 Clear or Purple primers.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

 
IPS Corporation 
455 West Victoria Street
Compton, CA 90220 
United States 
310-898-3300
Visit this company's website

Facility : Hartsville, TN

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement § +++ [1] [6] [G] CPVC PW, DWV, SW Weld-On BlazeMaster ECO Red Heavy Bodied CPVC ASTM F493
Solvent Cement§ +++ [1] [6] [G] CPVC PW, DWV, SW Weld-On BlazeMaster ECO Red Heavy Bodied CPVC ASTM D2846
Solvent Cement +++ [1] [3] CPVC PW, DWV, SW Weld-On BlazeMaster Fire Sprinkler Red Low VOC CPVC ASTM D2846
Solvent Cement +++ [1] [3] CPVC PW, DWV, SW Weld-On BlazeMaster Fire Sprinkler Red Low VOC CPVC ASTM F493 

! Product is Certified whether or not it bears the U.P. Code Mark
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers.
[3] This product is intended for use without a primer.
[4] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assemblies using the cement and
    one of the following primers: Christy's® Clear Primer Low VOC, Christy's® Purple Primer
    Low VOC, Christy's® Red Hot Clear® Low VOC, or Christy's® Red Hot Purple Primer Low VOC.
[5] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers.
[6] The compliance of this product with the health effects requriements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings.
[7]  The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the
    cement	and  Weld-On  P-70 Clear or Purple primers.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


 
Lubrizol Advanced Materials, Inc. 
9911 Brecksville Road
Cleveland, OH 44141-3201 
United States 
888-234-2436 
216-447-5000
Visit this company's website

Facility : Louisville, KY

Potable Water - Materials

Material Type End Use Trade Name Product Standard
CPVC 4120-06+++ 1 BlazeMaster® 3138 Black 290 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 3138 Orange 734 G ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 3138 Orange 734 M ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 3138 Orange 734 O ASTM D1784 23547
CPVC 4120-05+++ 2 BlazeMaster® 3238 Black 290 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 G ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 M ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 O ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Black 290 ASTM D1784 24447
CPVC 4120+++ 2 BlazeMaster® 88065 Blue 434 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 G ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 M ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 O ASTM D1784 24447
CPVC 4120-06+++ 1 BlazeMaster® 88738 Black 290 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 G ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 M ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 O ASTM D1784 23547 

$ This material is authorized for use in reclaimed water.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.  Trade Name colors that may appear the following way are also considered to be
      NSF Certified: BLACK or BLK; ORANGE or ORG; BLUE or BLU; GRAY or GRY; BROWN or BRN.

Facility : Oevel, Belgium

Potable Water - Materials

Material Type End Use Trade Name Product Standard
CPVC 4120-06+++ 1 BlazeMaster® 3138 Black 290 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 3138 Orange 734 G ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 3138 Orange 734 O ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 3138 Orange 734M ASTM D1784 23547
CPVC 4120-05+++ 2 BlazeMaster® 3238 Black 290 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 G ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 M ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 M ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 O ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Black 290 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Blue 434 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 G ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 M ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 M ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 O ASTM D1784 24447
CPVC 4120-06+++ 1 BlazeMaster® 88738 Black 290 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 G ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 O ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734M ASTM D1784 23447 

$ This material is authorized for use in reclaimed water.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.  Trade Name colors that may appear the following way are also considered to be
      NSF Certified: BLACK or BLK; ORANGE or ORG; BLUE or BLU; GRAY or GRY; BROWN or BRN.

Facility : Gujarat, India

Potable Water - Materials

Material Type End Use Trade Name Product Standard
CPVC 4120-06+++ 1 BlazeMaster® 3138 Black 290 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 3138 Orange 734 G ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 3138 Orange 734 O ASTM D1784 23547
CPVC 4120-05+++ 2 BlazeMaster® 3238 Black 290 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 G ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 M ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 3238 Orange 734 O ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Black 290 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Blue 434 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 G ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 M ASTM D1784 24447
CPVC 4120-05+++ 2 BlazeMaster® 88065 Orange 734 O ASTM D1784 24447
CPVC 4120-06+++ 1 BlazeMaster® 88738 Black 290 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 G ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 M ASTM D1784 23547
CPVC 4120-06+++ 1 BlazeMaster® 88738 Orange 734 O ASTM D1784 23547 

$ This material is authorized for use in reclaimed water.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).


NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.  Trade Name colors that may appear the following way are also considered to be
      NSF Certified: BLACK or BLK; ORANGE or ORG; BLUE or BLU; GRAY or GRY; BROWN or BRN.

 
Oatey Company 
20600 Emerald Parkway
Cleveland, OH 44135 
United States 
800-203-1155 
216-267-7100
Visit this company's website

Facility : Omaha, NE

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement% +++ [1] [2] CPVC PW, DWV, SW Oatey Cemento de CPVC Blazemaster® Red CPVC Lo-VOC One Step Cement ASTM F493
Solvent Cement% +++ [1] [2] CPVC PW, DWV, SW Tyco Blazemaster® TFP-600 Red CPVC Lo-VOC Cement One Step Heavy Bodied ASTM F493 

% Only products bearing the NSF Mark are Certified.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Oatey Purple Primer.
[2] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.
[3] Product intended for use without a primer.
[4] NSF-Certified Oatey Clear or Purple primer is required.
[5] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con
    Indicador UV Mediano. Todo clima Cemento de 1 Paso para CPVC


++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

 
Viking Plastics LLC 
202 Industrial Drive
Huntsville, AL 35811 
United States 
256-858-3711

Facility : Huntsville, AL

Potable Water - Pipe and Fittings

Product Type   Material Type   Trade Name   Product Standard

Pipe+++ [G]		  
CPVC		  
KT Plastics Blazemaster		  
ASTM F442
3/4" thru 3" 

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.


 
Viking Plastics LLC 
3033 Orchard Vista Drive Southeast
Suite 308 
Grand Rapids, MI 49546 
United States 
800-968-9501

Facility : # 1 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement+++ [2] [G] CPVC PW Viking® BlazeMaster® CPVC Cement ASTM F493 

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

Number of matching Manufacturers is 9
Number of matching Products is 198
Processing time was 0 seconds