NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, June 9, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?MaterialType=CPVC&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

A.Y. McDonald Mfg. Co.
4800 Chavenelle Road
Dubuque, IA 52002
United States
563-583-7311

Facility : Kaohsiung, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Valves# +++	CPVC	AY McDonald	ASTM F1970
CTS BALL VALVE, Model No. 2062
1/2" - 1"
# CPVC CTS Ball Valves rated at 100 PSI and 180°F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

ABRO Industries, Inc.
3580 Blackthorn Court
South Bend, IN 46628
United States
574-232-8289

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	ABRO CPVC Heavy Body Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	ABRO CPVC Orange Cement Z14 Regular Body	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	ABRO CPVC Regular Body Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and ABRO Purple Primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings assembled using the cement without a primer. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

AGM (Arabian Gulf Manufacturers Ltd. Company for Plastic and Rubber Industry)
P.O. Box 2143
Industrial City, Phase 5
Jeddah 21451
Saudi Arabia
866 2 6377944

Facility : # 24 USA

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement++ [1] [2]

CPVC

PW, DWV

AGM 914 Orange Heavy Bodied Medium Set CPVC Cement

ASTM F493

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    AGM Primer Clear.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

Al Waab Plastics Factory
Building 22, Street 67, Zone 92
P.O.Box 14918
Doha
Qatar
974 446 55181
Visit this company's website

Facility : Doha, Qatar

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [1] [G]	CPVC	AL WAAB Pipe	*SE 16558*
16mm - 160mm
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Alva Manufacturing LLC
1601 Hill Ave
Suite B
Mangonia Park, FL 33407
United States
561-421-1868
Visit this company's website

Facility : # 1 Colombia

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§ +++ [G]	CPVC	HYDRALINE CPVC	ASTM D2846
1/2" - 2"
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Arab Land Factory for Plastic Industry
Taiz Street round (45)
P.O. Box 17950
Sanaa
Yemen
967 1 24 8605

Facility : # 1 China

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1]	CPVC	PW, DWV, SW	ARAB LAND PLAST Low VOC CPVC 812 Yellow Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1]	CPVC	PW, DWV, SW	ARAB LAND PLAST Low VOC CPVC 814 Orange Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1]	CPVC	PW, DWV, SW	ARAB LAND PLAST Low VOC CPVC 818 Grey Heavy Bodied Plastic Pipe Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Arabian Plastic Manufacturing Company Ltd. (APLACO)
Abdullah Bin Kahanizan
P.O. Box 6193
Riyadh 11442
Saudi Arabia
966 1 4480250
Visit this company's website

Facility : Riyadh, Saudi Arabia

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings	CPVC	APLACO	ASTM F439
APLACO Cap
1/2" (8120960106)	3/4" (8120960107)	1" (8120960108)	1 1/4" (8120960109)
1 1/2" (8120960110)	2" (8120960111)
APLACO Coupling
8" (8120910119)	6" (8120910117)	1/2" (8120910106)	3/4" (8120910107)
1" (8120910108)	1 1/4" (8120910109)	1 1/2" (8120910110)	2" (8120910111)
2 1/2" (8120910112)	3" (8120910113)	4" (8120910114)
APLACO Elbow 45°
4" (8120150114)	1/2" (8120150106)	3/4" (8120150107)	1" (8120150108)
1 1/4" (8120150109)	1 1/2" (8120150110)	2" (8120150111)	2 1/2" (8120150112)
3" (8120150113)
APLACO Elbow 90°
6" (8120100117)	4" (8120100114)	1/2" (8120100106)	3/4" (8120100107)
1" (8120100108)	1 1/4" (8120100109)	1 1/2" (8120100110)	2" (8120100111)
2 1/2" (8120100112)	3" (8120100113)
APLACO Elbow 90° (SLIP x FPT)
1/2" x 1/2" (8120100606)	3/4" x 3/4" (8120100607)	1" x 1" (8120100608)	1 1/4" x 1 1/4" (8120100609)
1 1/2" x 1 1/2" (8120100610)	2" x 2" (8120100611)
APLACO Female Adaptor (SLIP x FPT)
1/2" (8120910606)	3/4" (8120910107)	1" (8120910608)	1 1/4" (8120910609)
1 1/2" (8120910610)	2" (8120910611)
APLACO Male Adaptor (SLIP x MPT)
1/2" (8120910706)	3/4" (8120910707)	1" (8120910708)	1 1/4" (8120910709)
1 1/2" (8120910710)	2" (8120910711)
APLACO Short Reducer
6" X 4" (8120900532)	4" X 2" (8120900420)	4" X 3" (8120900422)	6" X 3" (8120900530)
3/4" x 1/2" (8120900337)	1" x 1/2" (8120900341)	1" x 3/4" (8120900340)	1 1/4" x 1/2" (8120900342)
1 1/4" x 3/4" (8120900343)	1 1/4" x 1" (8120900344)	1 1/2" x 1/2"	1 1/2" x 3/4" (8120900345)
1 1/2" x 1" (8120900346)	1 1/2" x 1 1/4" (8120900347)	2" x 3/4" (8120900348)	2" x 1" (8120900349)
2" x 1 1/4" (8120900350)	2" x 1 1/2" (8120900351)	2 1/2" x 1 1/2"	2 1/2" x 2" (8120900357)
3" x 2" (8120900361)	3" x 2 1/2" (8120900360)
APLACO Tee 90°
6" (8120200117)	4" (8120200114)	1/2" (8120200106)	3/4" (8120200107)
1" (8120200108)	1 1/4" (8120200109)	1 1/2" (8120200110)	2" (8120200111)
2 1/2" (8120200112)	3" (8120200113)

NOTE: Only products bearing the NSF Mark are Certified.

Araib Factory for Industries
Al Taif Street
Sudair Industrial City
Riyadh 015016
Saudi Arabia
966 5 0798 7924
Visit this company's website

Facility : Riyadh, Saudi Arabia

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW, DWV, SW	WELD ARAIB Plastic Pipe Cement FLOWARAIB 714™ For CPVC	ASTM D2846
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW, DWV, SW	WELD ARAIB Plastic Pipe Cement FLOWARAIB 714™ For CPVC	ASTM F493
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This is a one-step solvent cement and is not intended for use with a primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effects requirements of NSF/ANSI Standard 61 is evaluated based on pipe and fittings assembled using the cement without a primer. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Argelia internacional S.A.
Hayatur Building Lot # 3
Santa Isabel Avenue between Streets 16 &
17, Colon Free Zone
Panama
507 431 2700

Facility : # 1 China

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	GRIVEN LOW VOC GREY COLOR HEAVY BODIED CPVC CEMENT	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	Griven Low VOC Yellow Color Medium Bodied CPVC Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 has been determined based on the testing of pipe and fittings assembled using the cement and the P-1030 or P-1050 primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Arrow Adhesives Company
5457 Spalding Drive
Norcross, GA 30092
United States
770-448-9058

Facility : Norcross, GA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Arrow 1148 CPVC Flow-Tite Low VOC One Step Yellow	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Arrow 1106 CPVC Low VOC Regular Body Clear	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Arrow 1106 CPVC Low VOC Regular Body Orange	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Arrow 1106HB CPVC Low VOC Heavy Body Clear	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Arrow 1106HB CPVC Low VOC Heavy Body Gray	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, SW, DWV	Arrow 1106HB CPVC Low VOC Heavy Body Orange	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Arrow 1106MB CPVC Low VOC Medium Body Orange	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	GripTech 744 CPVC Heavy Body Low VOC Orange	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	GripTech 647 CPVC FlowTech One Step Low VOC Yellow	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, SW, DWV	GripTech 744 CPVC Heavy Body Low VOC Gray	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	GripTech 544 CPVC Regular Body Low VOC Orange	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, SW, DWV	GripTech 644 CPVC Medium Body Low VOC Orange	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	SC-1004	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	SC-4004	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	SC-5004	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	SC-1204	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	SC-1304	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and an NSF® Certified Arrow Adhesives Company primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Astral Limited
207/1, B/H Rajpath Club
Sarkhej Gandhinagar Highway
Ahmedabad, Gujarat 380059
India
91 79 3011 2100
Visit this company's website

Facility : # 1 Gujarat, India

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++	CPVC	Astral	ASTM D2846
90° Elbow
1/2" (M512110501)	3/4" (M512110502)	1" (M512110503)	1 1/4" (M512110504)
1 1/2" (M512110505)	2" (M512110506)
Coupling
1/2" (M512111001)	3/4" (M512111002)	1" (M512111003)
Male Adapter (BSPT)
1 1/4" (M6105B)	1 1/2" (M6106B)
Tee
1/2" (M512110101)	3/4" (M512110102)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Astral CPVC Pro	ASTM D2846
Coupling
1/2" (M512111001)	3/4" (M512111002)	1" (M512111003)	1 1/4" CPVC (M512111004)
1 1/2" (M512111005)
Elbow
3/4" 45° (M512112302)	3/4" 90° (M512110502)	1/2" 90° (M512110501)	1" 45° (M512112303)
1" 90° (M512110503)	1 1/4" 45° (M512112304)	1 1/4" 90° (M512110504)	1 1/2" 45° (M512112305)
1 1/2" 90° (M512110505)	2" 45° (M512112306)	2" 90° (M512110506)
Reducer Bush
3/4" x 1/2" (M512111914)	1" x 1/2" (M512111915)	1" x 3/4" (M512111916)	1 1/4" x 1" (M512111919)
1 1/2" x 3/4" (M512111921)	1 1/2" x 1" (M512111922)	1 1/2" x 1 1/4" (M512111923)	1 1/4" x 3/4" (M512111918)
Tee
1/2" (M512110101)	3/4" (M512110102)	1 1/4" (M512110104)	1 1/2" (M512110105)
2" (M512110106)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings	CPVC	Astral	ASTM D2846
45º Elbow
3/4" (M512112302)	1" (M512112303)	1 1/4" (M512112304)	1 1/2" (M512112305)
2" (M512112306)
Coupling
1 1/4" CPVC (M512111004)	1 1/2" (M512111005)	2" (M512111006)
Cross Tee
1/2" (M512112401)	3/4" (M512112402)	1" (M512112403)
End Cap
1/2" (M512114101)	3/4" (M512114102)	1" (M512114103)	1 1/4" (M512114104)
1 1/2" (M512114105)	2" (M512114106)
IPS x CTS Bush
1/2" (M512112101)	1" (M512112103)	1 1/4" (M512112104)	1 1/2" (M512112105)
2" (M512112106)
Reducer Bush
3/4" x 1/2" (M512111914)	1" x 1/2" (M512111915)	1" x 3/4" (M512111916)	1 1/4" x 1/2" (M512111917)
1 1/4" x 3/4" (M512111918)	1 1/4" x 1" (M512111919)	1 1/2" x 1/2" (M512111920)	1 1/2" x 3/4" (M512111921)
1 1/2" x 1" (M512111922)	1 1/2" x 1 1/4" (M512111923)	2" x 1/2" (M512111924)	2" x 3/4" (M512111925)
2" x 1" (M512111926)	2" x 1 1/4" (M512111927)	2" x 1 1/2" (M512111928)
Reducer Coupler
3/4" x 1/2" (M512111114)	1" x 1/2" (M512111115)	1" x 3/4" (M512111116)	1 1/4" x 1/2" (M512111117)
1 1/4" x 3/4" (M512111118)	1 1/4" x 1" (M512111119)	1 1/2" x 1/2" (M512111120)	1 1/2" x 3/4" (M512111121)
1 1/2" x 1" (M512111122)	1 1/2" x 1 1/4" (M512111123)	2" x 1/2" (M512111124)	2" x 3/4" (M512111125)
2" x 1" (M512111126)	2" x 1 1/4" (M512111127)	2" x 1 1/2" (M512111128)
Reducer Elbow
3/4" x 1/2" 90° (M512110614)	1" x 1/2" (M512110615)	1" x 3/4" (M512110616)
Reducer Tee
3/4" x 1/2" (M512110214)	1" x 1/2" (M512110215)	1" x 3/4" (M512110216)	1 1/4" x 1/2" (M512110217)
1 1/4" x 3/4" (M512110218)	1 1/4" x 1" (M512110219)	1 1/2" x 1/2" (M512110222)	1 1/2" x 3/4" (M512110221)
1 1/2" x 1" (M512110222)	1 1/2" x 1 1/4" (M512110223)	2" x 1/2" (M512110224)	2" x 3/4" (M512110225)
2" x 1" (M512110226)	2" x 1 1/4" (M512110227)	2" x 1 1/2" (M512110228)
Tee
1 1/4" (M512110104)	1 1/2" (M512110105)	2" (M512110106)
Pipe+++ [G]	CPVC	Astral CPVC Pro	ASTM D2846
1/2" - 12"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Astral Limited
Astral House, 207/1 B/h Rajpath Club
Off S.G. Highway
Ahmedabad, Gujarat 380059
India
91 79 62212000

Facility : Gujarat, India

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 724 CPVC	ASTM F493
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	Weld On 500 CTS	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Resinova Chemie Ltd Weld-On P-70 Primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Aurora Material Solutions
9280 Jefferson Street
Streetsboro, OH 44241
United States
330-422-0700
Visit this company's website

Facility : Streetsboro, OH

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC+++	2	AuroraGuard™ AP4042 ABK 1100	ASTM D1784 23447
CPVC+++	2	AuroraGuard™ AP4042 AGR 1100	ASTM D1784 23447
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

B&K LLC
150 Schilling Boulevard
Suite 102
Collierville, TN 38017
United States
800-325-9331
901-751-7760
Visit this company's website

Facility : Taizhou, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings	CPVC	B&K	ASTM D2846
Union
164-203	164-203HC	164-204	164-204HC
Fittings+++ [G]	CPVC	B&K	ASTM D2846
Union
3/4" 164-204	1/2" 164-203HC	1/2" 164-203	3/4" 164-204HC
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

B&K LLC.
8285 Tournament Drive
Suite 150
Memphis, TN 38125
United States
901-753-3200
Visit this company's website

Facility : Kaohsiung, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Valves# +++	CPVC	B&K	ASTM F1970
CTS Ball Valve
107-123 HN VLV BALL CPVC CTS 1/2	107-123 VLV BALL CPVC CTS 1/2	107-124 HN VLV BALL CPVC CTS 3/4	107-124 VLV BALL CPVC CTS 3/4
107-125 HN VLV BALL CPVC CTS 1	107-125 VLV BALL CPVC CTS 1
# CPVC CTS Ball Valves rated at 100 PSI and 180°F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Bahrain Pipes BSC©
Building No. 715, Road 228, Block 702
P.O. Box 530
Salmabad, Manama
Bahrain
973 17786607
Visit this company's website

Facility : Manama, Bahrain

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++	CPVC	ULTRA TUFF CPVC Pipe	ASTM F441
1/2" - 8" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Banner, Inc.
100 Trousdale Way
Hartsville, TN 37074
United States
310-898-3350

Facility : # 1 USA

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement+++ [1] [2]

CPVC

PW, DWV, SW

BANNER DIAMOND CPVC Pipe Cement Heavy Bodied Orange

ASTM F493

! Product is Certified whether or not it bears the U.P. Code Mark.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Banner Primer Purple.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Black Swan Manufacturing Co.
4540 West Thomas Street
Chicago, IL 60651
United States
773-227-3700

Facility : Chicago, IL

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2]	CPVC	PW	Black Swan CPVC Cement, Heavy Body, Orange, Low VOC	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Black Swan CPVC Cement, Heavy Body, Gray, Low VOC	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Black Swan CPVC One-Step Cement, Yellow, Low VOC	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Black Swan CPVC Cement (Orange) - Medium Bodied	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Black Swan CPVC Cement (Orange) - Heavy Bodied	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Black Swan CPVC Cement (Gray) - Heavy Bodied	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Black Swan CPVC Cement One Step (Yellow) - Medium Bodied	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Black Swan CPVC Cement One Step (Red) - Medium Bodied	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Black Swan Purple/Clear primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Bow Plumbing Group, Inc.
5700 Cote de Liesse
Montreal, QC H4T 1B1
Canada
450-372-5481
Visit this company's website

Facility : # 2 Granby, Quebec, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing! § +++ [1] [G]	CPVC 4120	Bow Flotemp	ASTM D2846
1/2" - 2"
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing¢ +++ [1] [G]	CPVC 4120	Bow Flotemp	CSA B137.6
1/2" - 2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! § +++ [1] [G]	CPVC 4120	Bow CPVC FlowGuard Gold	ASTM D2846
1/2" - 2"
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing¢ +++ [1] [G]	CPVC 4120	Bow CPVC FlowGuard Gold	CSA B137.6
1/2" - 2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing! § +++ [1] [G]	CPVC 4120	Bow Superflo CPVC	ASTM D2846
1/2" - 2"
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing¢ +++ [1] [G]	CPVC 4120	Bow Superflo CPVC	CSA B137.6
1/2" - 2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

~ Certified Enviro EXP is coextruded natural tubing with a red, blue, white or clear outer
  layer.

Facility : Granby, Quebec, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings! § +++ [1] [2] [G]	CPVC	Bow	ASTM D2846
45° Elbow
520544, 516419, 568626, or 150094 1/2"	520551, 516427, 568618, 150102 3/4"	520569, 516435, 569210, or 150110 1"	520577 or 516443 1 1/4"
520585 or 516450 1 1/2"	520593 or 516468 2"
45° Street Elbow (Hub x Spigot)
520528, 516476, 569202, or 150128 1/2"	520536, 516484, 569400, 150136 3/4"	563288 or 516492 1"
90° Elbow
520437, 516310, 568535, 550053, 150003, or 555581 1/2"	520460, 516328, 568519, 555615, 150011, or 555615 3/4"	520478, 516336, 568543, or 150029 3/4" x 1/2"	520486, 516344, 569145, or 150037 1"
520494 or 516351 1 1/4"	520502 or 516369 1 1/2"	520510 or 516377 2"
90° Street Elbow (Hub x Spigot)
520445, 516385, 568212, or 150045 1/2"	520452, 516393, 150052, or 568238 3/4"	563239 or 516401 1"
Bushing (CTS)
522508 or 516161 1 1/2" x 1/2"	522516 or 516203 2" x 1/2"	522524 or 516211 2" x 3/4"	520759 or 516237 2" x 1 1/4"
Bushing (IPS x CTS)
522581, 516252, or 150433 1/2"	522599 or 516260 3/4"	520262 or 516278 1"	522649 or 516286 1 1/4"
520742 or 516294 1 1/2"	522631 or 516302 2"
Bushing (Spigot x Hub)
520213, 516104, 568337, 555813, or 150409 3/4" x 1/2"	520254, 516112 or 568345 1" x 1/2"	520247, 516120, 569152, or 150425 1" x 3/4"	520734 or 516138 1 1/4" x 1/2"
520270 or 516146 1 1/4" x 3/4"	520288 or 516153 1 1/4" x 1"	520304 or 516179 1 1/2" x 3/4"	520320 or 516187 1 1/2" x 1"
520312 or 516195 1 1/2" x 1 1/4"	520338 or 516229 2" x 1"	520346 or 516245 2" x 1 1/2"
Cap
520353, 516500, 568410, 555714, or 150177 1/2"	520361, 516518, 568436, 555722, or 150185 3/4"	520379, 516526, 569178, or 150193 1"	520387 or 516534 1 1/4"
520395 or 516542 1 1/2"	520403 or 516559 2"
Coupling (Hub x Hub)
520114, 516005, 568246, 550137, 150201, or 555573 1/2"	520122, 516013, 568253, 555516, 150219, or 555516 3/4"	520130, 516021, 569111, 555730, or 150227 3/4" x 1/2"	520155, 516039, 568279, 150235 1"
520163, 516047, 568287, or 150243 1" x 3/4"	520189 or 516054 1 1/4"	520197 or 516062 1 1/2"	520205 or 516070 2"
Drop Ear Elbow
520429, 526012, 568568, or 150326 1/2"	520411, 526020, 569103, or 150334 1/2" F x 1/2" F NPSM
Female Adapter (CPVC FPT x CPVC HUB)
520684, 516989 568808, 555821, or 150342 1/2"	520692, 516997 568816, 555839, or 150359 3/4"	520700, 526004 or 569186 1"
Male Adapter (MPT x Hub)
520601, 516914, 568709, 555524, or 150375 1/2"	520627, 516930, 568717, 555532, or 150383 3/4"	520767 or 516922 1/2" x 3/4"	520635, 516948, 568725, or 150391 1"
520643 or 516955 1 1/4"	520650 or 516963 1 1/2"	520668 or 516971 2"
Manifold Tee
562363 1" x 1" x 1/2"
Reducing Tee
520098, 516633, 568196, or 150276 3/4" x 1/2" x 1/2"	520833 or 516625 1/2" x 1/2" x 3/4"	520072, 516641, 568188, or 150284 3/4" x 1/2" x 3/4"	520064, 516658, 568170, 555920, or 150292 3/4" x 3/4" x 1/2"
520841 or 516666 3/4" x 3/4" x 1"	520858 or 516674 1" x 1/2" x 1/2"	520866 or 516682 1" x 1/2" x 3/4"	520874 or 516690 1" x 1/2" x 1"
520882 or 516708 1" x 3/4" x 1/2"	520890 or 516716 1" x 3/4" x 3/4"	520908 or 516724 1" x 3/4" x 1"	520916 or 516732 1" x 1" x 1/2"
520106, 516740 or 569095 1" x 1" x 3/4"	521005 or 516757 1 1/4" x 1" x 1/2"	521013 or 516765 1 1/4" x 1" x 3/4"	521021 or 516773 1 1/4" x 1" x 1"
521039 or 516781 1 1/4" x 1" x 1 1/4"	521047 or 516799 1 1/4" x 1 1/4" x 1/2"	521054 or 516807 1 1/4" x 1 1/4" x 3/4"	521062 or 516815 1 1/4" x 1 1/4" x 1"
521070 or 516823 1 1/4" x 1 1/4" x 1 1/2"	521286 or 516849 1 1/2" x 1 1/2" x 1/2"	521203 or 516831 1 1/2" x 1" x 1"	521294 or 516856 1 1/2" x 1 1/2" x 3/4"
521302 or 516864 1 1/2" x 1 1/2" x 1"	521633 or 516872 2" x 2" x 1/2"	521641 or 516880 2" x 2" x 3/4"	521674 or 516906 2" x 2" x 1 1/2"
521658 or 516898 2" x 2" x 1"
Tee
520007, 516567, 568113, 555623, 150250, 555623, or 550020 1/2"	520015, 516575, 568477, 555631, 150268, or 555631 3/4"	520023, 516583, 568139, or 150300 1"	520031 or 516591 1 1/4"
520049 or 516609 1 1/2"	520056 or 516617 2"
Transition Coupling (IPS x CTS)
520171, 516088, or 150441 3/4"	520221 or 516096 1"
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Part number may include a "Blue" suffix to indicate a blue CPVC fitting. [2] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings! § +++ [1] [2] [G]	CPVC	Bow CPVC FlowGuard Gold	ASTM D2846
45° Elbow
520544 or 516419 1/2"	520551 or 516427 3/4"	520569 or 516435 1"	520577 or 516443 1 1/4"
520585 or 516450 1 1/2"	520593 or 516468 2"
45° Street Elbow (Hub x Spigot)
520528 or 516476 1/2"	520536 or 516484 3/4"	563288 or 516492 1"
90° Elbow
520437 or 516310 1/2"	520460 or 516328 3/4"	520478 or 516336 3/4" x 1/2"	520486 or 516344 1"
520494 or 516351 1 1/4"	520502 or 516369 1 1/2"	520510 or 516377 2"
90° Street Elbow (Hub x Spigot)
520445 or 516385 1/2"	520452 or 516393 3/4"	563239 or 516401 1"
Bushing (CTS)
522508 or 516161 1 1/2" x 1/2"	522516 or 516203 2" x 1/2"	522524 or 516211 2" x 3/4"	520759 or 516237 2" x 1 1/4"
Bushing (IPS x CTS)
522581 or 516252 1/2"	522599 or 516260 3/4"	520262 or 516278 1"	522649 or 516286 1 1/4"
520742 or 516294 1 1/2"	522631 or 516302 2"
Bushing (Spigot x Hub)
520213 or 516104 3/4" x 1/2"	520254 or 516112 1" x 1/2"	520247 or 516120 1" x 3/4"	520734 or 516138 1 1/4" x 1/2"
520270 or 516146 1 1/4" x 3/4"	520288 or 516153 1 1/4" x 1"	520304 or 516179 1 1/2" x 3/4"	520320 or 516187 1 1/2" x 1"
520312 or 516195 1 1/2" x 1 1/4"	520338 or 516229 2" x 1"	520346 or 516245 2" x 1 1/2"
Cap
520353 or 516500 1/2"	520361 or 516518 3/4"	520379 or 516526 1"	520387 or 516534 1 1/4"
520395 or 516542 1 1/2"	520403 or 516559 2"
Coupling (Hub x Hub)
520114 or 516005 1/2"	520122 or 516013 3/4"	520130 or 516021 3/4" x 1/2"	520155 or 516039 1"
520163 or 516047 1" x 3/4"	520189 or 516054 1 1/4"	520197 or 516062 1 1/2"	520205 or 516070 2"
Drop Ear Elbow
520429 or 526012 1/2"	520411 or 526020 1/2" F x 1/2" F NPSM
Female Adapter (CPVC FPT x CPVC HUB)
520684 or 516989 1/2"	520692 or 516997 3/4"	520700 or 526004 1"
Male Adapter (MPT x Hub)
520601 or 516914 1/2"	520627 or 516930 3/4"	520767 or 516922 1/2" x 3/4"	520635 or 516948 1"
520643 or 516955 1 1/4"	520650 or 516963 1 1/2"	520668 or 516971 2"
Manifold Tee
562363 1" x 1" x 1/2"
Reducing Tee
520098 or 516633 3/4" x 1/2" x 1/2"	520833 or 516625 1/2" x 1/2" x 3/4"	520072 or 516641 3/4" x 1/2" x 3/4"	520064 or 516658 3/4" x 3/4" x 1/2"
520841 or 516666 3/4" x 3/4" x 1"	520858 or 516674 1" x 1/2" x 1/2"	520866 or 516682 1" x 1/2" x 3/4"	520874 or 516690 1" x 1/2" x 1"
520882 or 516708 1" x 3/4" x 1/2"	520890 or 516716 1" x 3/4" x 3/4"	520908 or 516724 1" x 3/4" x 1"	520916 or 516732 1" x 1" x 1/2"
520106 or 516740 1" x 1" x 3/4"	521005 or 516757 1 1/4" x 1" x 1/2"	521013 or 516765 1 1/4" x 1" x 3/4"	521021 or 516773 1 1/4" x 1" x 1"
521039 or 516781 1 1/4" x 1" x 1 1/4"	521047 or 516799 1 1/4" x 1 1/4" x 1/2"	521054 or 516807 1 1/4" x 1 1/4" x 3/4"	521062 or 516815 1 1/4" x 1 1/4" x 1"
521070 or 516823 1 1/4" x 1 1/4" x 1 1/2"	521286 or 516849 1 1/2" x 1 1/2" x 1/2"	521203 or 516831 1 1/2" x 1" x 1"	521294 or 516856 1 1/2" x 1 1/2" x 3/4"
521302 or 516864 1 1/2" x 1 1/2" x 1"	521633 or 516872 2" x 2" x 1/2"	521641 or 516880 2" x 2" x 3/4"	521674 or 516906 2" x 2" x 1 1/2"
521658 or 516898 2" x 2" x 1"
Tee
520007 or 516567 1/2"	520015 or 516575 3/4"	520023 or 516583 1"	520031 or 516591 1 1/4"
520049 or 516609 1 1/2"	520056 or 516617 2"
Transition Coupling (IPS x CTS)
520171 or 516088 3/4"	520221 or 516096 1"
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Part number may include a "Blue" suffix to indicate a blue CPVC fitting. [2] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings! § +++ [1] [2] [G]	CPVC	Bow	CSA B137.6
45° Elbow
520544, 516419, 568626, or 150094 1/2"	520551, 516427, 568618, or 150102 3/4"	520569, 516435, 569210, or 150110 1"	520577 or 516443 1 1/4"
520585 or 516450 1 1/2"	520593 or 516468 2"
45° Street Elbow (Hub x Spigot)
520528, 516476, 569202, or 150128 1/2"	520536, 516484, 569400, or 150136 3/4"	563288, 516492 1"
90° Elbow
520437, 516310, 568535, 550053, 150003, or 555581 1/2"	520460, 516328, 568519, 555615, 150011, or 555615 3/4"	520478, 516336, 568543, or 150029 3/4" x 1/2"	520486, 516344, 569145, or 150037 1"
520494 or 516351 1 1/4"	520502 or 516369 1 1/2"	520510 or 516377 2"
90° Street Elbow (Hub x Spigot)
520445, 516385, 568212, or 150045 1/2"	520452, 516393, 150052, or 568238 3/4"	563239 or 516401 1"
Bushing (CTS)
522508 or 516161 1 1/2" x 1/2"	522516 or 516203 2" x 1/2"	522524 or 516211 2" x 3/4"	520759 or 516237 2" x 1 1/4"
Bushing (IPS x CTS)
522581, 516252, or 150433 1/2"	522599 or 516260 3/4"	520262 or 516278 1"	522649 or 516286 1 1/4"
520742 or 516294 1 1/2"	522631 or 516302 2"
Bushing (Spigot x Hub)
520213, 516104, 568337, 555813, or 150409 3/4" x 1/2"	520254, 516112 or 568345 1" x 1/2"	150425, 520247, 516120 or 569152 1" x 3/4"	520734 or 516138 1 1/4" x 1/2"
520270 or 516146 1 1/4" x 3/4"	520288 or 516153 1 1/4" x 1"	520304 or 516179 1 1/2" x 3/4"	520320 or 516187 1 1/2" x 1"
520312 or 516195 1 1/2" x 1 1/4"	520338 or 516229 2" x 1"	520346 or 516245 2" x 1 1/2"
Cap
520353, 516500, 568410, 555714, or 150177 1/2"	520361, 516518, 568436, 555722, or 150185 3/4"	520379, 516526, 569178, or 150193 1"	520387 or 516534 1 1/4"
520395 or 516542 1 1/2"	520403 or 516559 2"
Coupling (Hub x Hub)
520114, 516005, 568246, 550137, 150201, pr 555573 1/2"	520122, 516013, 568253, 555516, 150219, or 555516 3/4"	520130, 516021, 569111, 555730, or 150227 3/4" x 1/2"	520155, 516039, 568279, or 150235 1"
520163, 516047, 568287, or 150243 1" x 3/4"	520189 or 516054 1 1/4"	520197 or 516062 1 1/2"	520205 or 516070 2"
Drop Ear Elbow
520429, 526012, 568568, or 150326 1/2"	520411, 526020, 569103, or 150334 1/2" F x 1/2" F NPSM
Female Adapter (CPVC FPT x CPVC HUB)
520684, 516989, 568808, 555821, or 150342 1/2"	520692, 516997, 568816, 555839, or 150359 3/4"	520700, 526004 or 569186 1"
Male Adapter (MPT x Hub)
520601, 516914,568709, 555524, or 150375 1/2"	520627, 516930, 568717, 555532, or 150383 3/4"	520767 or 516922 1/2" x 3/4"	520635, 516948, 568725, or 150391 1"
520643 or 516955 1 1/4"	520650 or 516963 1 1/2"	520668 or 516971 2"
Manifold Tee
562363 1" x 1" x 1/2"
Reducing Tee
520098, 516633, 568196, or 150276 3/4" x 1/2" x 1/2"	520833 or 516625 1/2" x 1/2" x 3/4"	520072, 516641, 568188, or 150284 3/4" x 1/2" x 3/4"	520064, 516658, 568170, 555920, or 150292 3/4" x 3/4" x 1/2"
520841 or 516666 3/4" x 3/4" x 1"	520858 or 516674 1" x 1/2" x 1/2"	520866 or 516682 1" x 1/2" x 3/4"	520874 or 516690 1" x 1/2" x 1"
520882 or 516708 1" x 3/4" x 1/2"	520890 or 516716 1" x 3/4" x 3/4"	520908 or 516724 1" x 3/4" x 1"	520916 or 516732 1" x 1" x 1/2"
520106, 516740 or 569095 1" x 1" x 3/4"	521005 or 516757 1 1/4" x 1" x 1/2"	521013 or 516765 1 1/4" x 1" x 3/4"	521021 or 516773 1 1/4" x 1" x 1"
521039 or 516781 1 1/4" x 1" x 1 1/4"	521047 or 516799 1 1/4" x 1 1/4" x 1/2"	521054 or 516807 1 1/4" x 1 1/4" x 3/4"	521062 or 516815 1 1/4" x 1 1/4" x 1"
521070 or 516823 1 1/4" x 1 1/4" x 1 1/2"	521286 or 516849 1 1/2" x 1 1/2" x 1/2"	521203 or 516831 1 1/2" x 1" x 1"	521294 or 516856 1 1/2" x 1 1/2" x 3/4"
521302 or 516864 1 1/2" x 1 1/2" x 1"	521633 or 516872 2" x 2" x 1/2"	521641 or 516880 2" x 2" x 3/4"	521674 or 516906 2" x 2" x 1 1/2"
521658 or 516898 2" x 2" x 1"
Tee
520007, 516567, 568113, 555623, 150250, 555623, or 550020 1/2"	520015, 516575, 568477, 555631, 150268, or 555631 3/4"	520023, 516583, 568139, or 150300 1"	520031 or 516591 1 1/4"
520049 or 516609 1 1/2"	520056 or 516617 2"
Transition Coupling (IPS x CTS)
520171, 516088, or 150441 3/4"	520221 or 516096 1"
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Part number may include a "Blue" suffix to indicate a blue CPVC fitting. [2] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings! § +++ [1] [2] [G]	CPVC	Bow CPVC FlowGuard Gold	CSA B137.6
45° Elbow
520544 or 516419 1/2"	520551 or 516427 3/4"	520569 or 516435 1"	520577 or 516443 1 1/4"
520585 or 516450 1 1/2"	520593 or 516468 2"
45° Street Elbow (Hub x Spigot)
520528, 516476 1/2"	520536, 516484 3/4"	563288, 516492 1"
90° Elbow
520437 or 516310 1/2"	520460 or 516328 3/4"	520478 or 516336 3/4" x 1/2"	520486 or 516344 1"
520494 or 516351 1 1/4"	520502 or 516369 1 1/2"	520510 or 516377 2"
90° Street Elbow (Hub x Spigot)
520445 or 516385 1/2"	520452 or 516393 3/4"	563239 or 516401 1"
Bushing (CTS)
522508 or 516161 1 1/2" x 1/2"	522516 or 516203 2" x 1/2"	522524 or 516211 2" x 3/4"	520759 or 516237 2" x 1 1/4"
Bushing (IPS x CTS)
522581 or 516252 1/2"	522599 or 516260 3/4"	520262 or 516278 1"	522649 or 516286 1 1/4"
520742 or 516294 1 1/2"	522631 or 516302 2"
Bushing (Spigot x Hub)
520213 or 516104 3/4" x 1/2"	520254 or 516112 1" x 1/2"	520247 or 516120 1" x 3/4"	520734 or 516138 1 1/4" x 1/2"
520270 or 516146 1 1/4" x 3/4"	520288 or 516153 1 1/4" x 1"	520304 or 516179 1 1/2" x 3/4"	520320 or 516187 1 1/2" x 1"
520312 or 516195 1 1/2" x 1 1/4"	520338 or 516229 2" x 1"	520346 or 516245 2" x 1 1/2"
Cap
520353 or 516500 1/2"	520361 or 516518 3/4"	520379 or 516526 1"	520387 or 516534 1 1/4"
520395 or 516542 1 1/2"	520403 or 516559 2"
Coupling (Hub x Hub)
520114 or 516005 1/2"	520122 or 516013 3/4"	520130 or 516021 3/4" x 1/2"	520155 or 516039 1"
520163 or 516047 1" x 3/4"	520189 or 516054 1 1/4"	520197 or 516062 1 1/2"	520205 or 516070 2"
Drop Ear Elbow
520429 or 526012 1/2"	520411 or 526020 1/2" F x 1/2" F NPSM
Female Adapter (CPVC FPT x CPVC HUB)
520684 or 516989 1/2"	520692 or 516997 3/4"	520700 or 526004 1"
Male Adapter (MPT x Hub)
520601 or 516914 1/2"	520627 or 516930 3/4"	520767 or 516922 1/2" x 3/4"	520635 or 516948 1"
520643 or 516955 1 1/4"	520650 or 516963 1 1/2"	520668 or 516971 2"
Manifold Tee
562363 1" x 1" x 1/2"
Reducing Tee
520098 or 516633 3/4" x 1/2" x 1/2"	520833 or 516625 1/2" x 1/2" x 3/4"	520072 or 516641 3/4" x 1/2" x 3/4"	520064 or 516658 3/4" x 3/4" x 1/2"
520841 or 516666 3/4" x 3/4" x 1"	520858 or 516674 1" x 1/2" x 1/2"	520866 or 516682 1" x 1/2" x 3/4"	520874 or 516690 1" x 1/2" x 1"
520882 or 516708 1" x 3/4" x 1/2"	520890 or 516716 1" x 3/4" x 3/4"	520908 or 516724 1" x 3/4" x 1"	520916 or 516732 1" x 1" x 1/2"
520106 or 516740 1" x 1" x 3/4"	521005 or 516757 1 1/4" x 1" x 1/2"	521013 or 516765 1 1/4" x 1" x 3/4"	521021 or 516773 1 1/4" x 1" x 1"
521039 or 516781 1 1/4" x 1" x 1 1/4"	521047 or 516799 1 1/4" x 1 1/4" x 1/2"	521054 or 516807 1 1/4" x 1 1/4" x 3/4"	521062 or 516815 1 1/4" x 1 1/4" x 1"
521070 or 516823 1 1/4" x 1 1/4" x 1 1/2"	521286 or 516849 1 1/2" x 1 1/2" x 1/2"	521203 or 516831 1 1/2" x 1" x 1"	521294 or 516856 1 1/2" x 1 1/2" x 3/4"
521302 or 516864 1 1/2" x 1 1/2" x 1"	521633 or 516872 2" x 2" x 1/2"	521641 or 516880 2" x 2" x 3/4"	521674 or 516906 2" x 2" x 1 1/2"
521658 or 516898 2" x 2" x 1"
Tee
520007 or 516567 1/2"	520015 or 516575 3/4"	520023 or 516583 1"	520031 or 516591 1 1/4"
520049 or 516609 1 1/2"	520056 or 516617 2"
Transition Coupling (IPS x CTS)
520171 or 516088 3/4"	520221 or 516096 1"
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Part number may include a "Blue" suffix to indicate a blue CPVC fitting. [2] May be marked with alternate trade designation "Wavin”. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Charlotte Pipe & Foundry Company
Plastics Division
4210 Old Charlotte Highway
P.O. Box 1339
Monroe, NC 28111-1339
United States
704-291-3218
Visit this company's website

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW, DWV, SW	ChemDrain® One-Step CPVC Solvent Cement	ASTM F493
Solvent Cement# [1] [2] [3] [G]	CPVC	CW	ChemDrain® One-Step CPVC Solvent Cement	ASTM F2618
# Product has been Certified as part of the Charlotte Pipe ChemDrain System to ASTM F2618. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61, Section 4. [2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld-On® P-68®, P-70® Clear or Purple, or P-72 Clear Primers. [3] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Huntsville, AL

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§ +++ [G]	CPVC 4120	Charlotte Pipe®*	ASTM D2846
1/4" - 2" SDR 11
* These pipe products may also be represented by the trade names: Charlotte Pipe®/Flowguard Gold®. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G]	CPVC	CPF**	ASTM D2846
CTS 2100 Coupling
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	3/4" x 1/2"	1" x 3/4"
CTS x IPS 2100I Transition Coupling
3/4"	1"
CTS 2107 Reducer Bushing
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"
CTS 2116 CTS Cap
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CTS 2300 90° Elbow, 1/4 Bend
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	3/4" x 1/2"
CTS 2300D Hub x Hub Drop Ear Elbow
1/2"
CTS 2304 90° Street Elbow
1/2"	3/4"	1"
CTS 2309 45° Elbow, 1/8 Bend
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CTS 2310 45° Street Elbow
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CTS 2400 Reducer Tee
1/2" x 1/2" x 3/4"	3/4" x 3/4" x 1"	3/4" x 1/2" x 1/2"	3/4" x 1/2" x 3/4"
3/4" x 3/4" x 1/2"	1" x 1/2" x 1/2"	1" x 1/2" x 3/4"	1" x 1/2" x 1"
1" x 3/4" x 1/2"	1" x 3/4" x 3/4"	1" x 3/4" x 1"	1" x 1" x 1/2"
1" x 1" x 3/4"	1 1/4" x 1" x 1"	1 1/4" x 1 1/4" x 1/2"	1 1/4" x 1 1/4" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1" x 1"	1 1/2" x 1 1/2" x 1/2"	1 1/2" x 1 1/2" x 1"
1 1/2" x 1 1/2" x 3/4"	2" x 2" x 3/4"	2" x 2" x 1/2"	2" x 2" X 1"
2" x 2" x 1 1/2"
CTS 2400 Tee
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CTS 2500 Spigot Adapter Trans. Union
1/2"	3/4"
CTS x IPS 2107I Transition Bushing
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
** These fitting products may also be represented by the trade names: CP&F, Charlotte, Charlotte Pipe, and Charlotte Pipe and Foundry. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Monroe, NC

Corrosive Waste - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# Þ	CPVC	Charlotte Pipe ChemDrain®^	ASTM F2618
AW 100 Coupling
1 1/2"	2"	3"	4"
6"	8"
AW 101 Female Adapter
1 1/2"	2"	3"	4"
6"
AW 102 Pipe Increaser Reducer
1 1/2" x 2"	1 1/2" x 3"	2" x 3"	2" x 4"
3" x 4"	3" x 6"	4" x 6"
AW 103 Male Trap Adapter
1 1/2"	2"
AW 103P Male Trap Adapter w/ Plastic Ring
1 1/2"	2"
AW 103X Male Trap Adapter w/ Metal Ring
1 1/2"	2"
AW 105 Fitting Cleanout Adapter
1 1/2"	2"	3"	4"
6"	8"
AW 105X Fitting Cleanout Adapter w/ CO
1 1/2"	2"	3"	4"
6"	8"
AW 106 Cleanout Plug
1 1/2"	2"	3"	4"
6"	8"
AW 107 Flush Bushing
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 3"	6" x 4"	8" x 4"
8" x 6"
AW 109 Male Adapter
1 1/2"	2"	3"	4"
6"
AW 110 Cleanout Plug
1 1/2"	2"	3"	4"
6"
AW 116 Cap Socket
1 1/2"	2"	3"	4"
6"	8"
AW 1506 CPVC Tail Piece
1 1/2" x 6"
AW 1506P CPVC Tail Piece w/ Nut
1 1/2" - 6"
AW 1512 CPVC Tail Piece
1 1/2" x 12"
AW 1512P CPVC Tail Piece w/ Nut
1 1/2" x 12"
AW 1514P CPVC Tail Piece w/ Nut
1 1/2" x 14"
AW 300 1/4 Bend
1 1/2"	2"	3"	4"
6"	8"
AW 302 1/4 Bend Street
1 1/2"	2"	3"	4"
6"	8"
AW 304 Long Sweep 1/4 Bend
1 1/2"	2"	3"	4"
6"
AW 309 Long Sweep 1/4 Bend Street
1 1/2"	2"	3"	4"
6"
AW 319 1/4 Vent Ell Street
1 1/2"	2"	3"	4"
AW 319 1/6 Bend
1 1/2"	2"	3"	4"
6"
AW 320 1/6 Bend Street
1 1/2"	2"	3"	4"
AW 321 1/8 Bend
1 1/2"	2"	3"	4"
6"	8"
AW 323 1/8 Bend Street
1 1/2"	2"	3"	4"
6"	8"
AW 324 1/16 Bend
1 1/2"	2"	3"	4"
6"	8"
AW 326 1/16 Bend Street
1 1/2"	2"	3"	4"
6"	8"
AW 327 Double 1/4 Bend
1 1/2"	2"	3"
AW 331 1/4 Vent Ell
1 1/2"	2"	3"	4"
6"
AW 333 1/4 Bend Vent Street
1 1/2"	2"	3"	4"
AW 400 Sanitary Tee
1 1/2"	2"	3"	4"
6"	8"
AW 401 Sanitary Tee Reducing
2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2" x 1 1/2" x 2"	3" x 3" x 1 1/2"
3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"	6" x 6" x 4"
8" x 8" x 4"
AW 404 Sanitary Tee Reducing, Street
1 1/2"	2"	3"
AW 428 Double Sanitary Tee
1 1/2"	2"	3"	4"
AW 429 Double Sanitary Tee Reducing
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 1 1/2" x 1 1/2"
4" x 4" x 2" x 2"	4" x 4" x 3" x 3"
AW 441 Vent Tee
1 1/2"	2"	3"	4"
AW 444X Cleanout Tee w/ Plug
1 1/2"	2"	3"	4"
6"
AW 445 Flush Cleanout Tee
1 1/2"	2"	3"	4"
6"
AW 445X Flush C/O Tee w/ Cleanout Plug
1 1/2"	2"	3"	4"
6"
AW 500 Double Fixture Fitting
1 1/2"	2"	3"
AW 501 Combination Wye & 1/8 Bend
1 1/2"	2"	3"	4"
AW 502 Combo Wye & 1/8 Bend, Rdcing (1 Piece), Hub
2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"
AW 503 Combination Wye & 1/8 Bend
2"	3"	4"	6"
8"
AW 504 Combination Wye & 1/8 Bend, Reducing 2 Pcs
6" x 6" x 3"	6" x 6" x 4"
AW 504 Combo Wye 1/8 Bend Non-Reducing 2 Pcs
1 1/2"	2"	3"	4"
6"	6" x 6" x 3"	6" x 6" x 4"	8"
AW 507 Dble Combo Wye 1/8 Bend Non-Reducing, Fabr.
1 1/2"	2"	3"	4"
6"
AW 507 Double Combo Wye & 1/8 Bend, Reducing
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"	4" x 4" x 3" x 3"
6" x 6" x 3" x 3"	6" x 6" x 4" x 4"
AW 600 Wye
1 1/2"	2"	3"	4"
6"	8"
AW 601 Reducing Wye
2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 1 1/2"	4" x 4" x 2"	4" x 4" x 3"	6" x 6" x 3"
6" x 6" x 4"	8" x 8" x 4"	8" x 8" x 6"
AW 611 Double Wye
1 1/2"	2"	3"	4"
6"
AW 612 Double Wye Reducing
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"	4" x 4" x 3" x 3"
6" x 6" x 4" x 4"
AW 700 Return Bend
1 1/2"	2"	3"	4"
6"
AW 705 S-Trap
1 1/2"	2"	3"	4"
AW 705R Running Trap
1 1/2"	2"	3"	4"
6"
AW 706X P-Trap w/ Solvent Weld Joint
1 1/2"	2"	3"	4"
6"
AW 707X P-Trap w/ Solvent Weld Joint & Clean Out
1 1/2"	2"
AW 708P P-Trap w/ Union
1 1/2"	2"
AW 711P LA P-Trap w/ Union
1 1/2"
AW 712 Jar Trap
1 1/2"
AW 712 P Jar Trap with Tail Piece Adapter
1 1/2"
AW 8530 Van Stone Flange
8"	1 1/2"	2"	3"
4"	6"
# Charlotte Pipe ChemDrain Pipe and Fittings have been Certified as a system with the Charlotte Pipe ChemDrain One-Step CPVC Solvent Cement to ASTM F2618. ^ These fitting products are also represented by the trade names: Charlotte Pipe and Foundry Company®, Charlotte®, Charlotte Pipe®, and ChemDrain Corrosive Waste Drainage System. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code.
Fittings# ¢ Þ	CPVC	Charlotte Pipe ChemDrain®^	CSA B181.3
AW 100 Coupling
1 1/2"	2"	3"	4"
6"	8"
AW 101 Female Adapter
1 1/2"	2"	3"	4"
6"
AW 102 Pipe Increaser Reducer
1 1/2" x 2"	1 1/2" x 3"	2" x 3"	2" x 4"
3" x 4"	3" x 6"	4" x 6"
AW 103 Male Trap Adapter
1 1/2"	2"
AW 103P Male Trap Adapter w/ Plastic Ring
1 1/2"	2"
AW 103X Male Trap Adapter w/ Metal Ring
1 1/2"	2"
AW 105 Fitting Cleanout Adapter
1 1/2"	2"	3"	4"
6"	8"
AW 105X Fitting Cleanout Adapter w/ CO
1 1/2"	2"	3"	4"
6"	8"
AW 106 Cleanout Plug
1 1/2"	2"	3"	4"
6"	8"
AW 107 Flush Bushing
2" x 1 1/2"	3" x 1 1/2"	3" x 2"	4" x 2"
4" x 3"	6" x 3"	6" x 4"	8" x 4"
8" x 6"
AW 109 Male Adapter
1 1/2"	2"	3"	4"
6"
AW 110 Cleanout Plug
1 1/2"	2"	3"	4"
6"
AW 116 Cap Socket
1 1/2"	2"	3"	4"
6"	8"
AW 1506 CPVC Tail Piece
1 1/2" x 6"
AW 1506P CPVC Tail Piece w/ Nut
1 1/2" - 6"
AW 1512 CPVC Tail Piece
1 1/2" x 12"
AW 1512P CPVC Tail Piece w/ Nut
1 1/2" x 12"
AW 1514P CPVC Tail Piece w/ Nut
1 1/2" x 14"
AW 300 1/4 Bend
1 1/2"	2"	3"	4"
6"	8"
AW 302 1/4 Bend Street
1 1/2"	2"	3"	4"
6"	8"
AW 304 Long Sweep 1/4 Bend
1 1/2"	2"	3"	4"
6"
AW 309 Long Sweep 1/4 Bend Street
1 1/2"	2"	3"	4"
6"
AW 319 1/4 Vent Ell Street
1 1/2"	2"	3"	4"
AW 319 1/6 Bend
1 1/2"	2"	3"	4"
6"
AW 320 1/6 Bend Street
1 1/2"	2"	3"	4"
AW 321 1/8 Bend
1 1/2"	2"	3"	4"
6"	8"
AW 323 1/8 Bend Street
1 1/2"	2"	3"	4"
6"	8"
AW 324 1/16 Bend
1 1/2"	2"	3"	4"
6"	8"
AW 326 1/16 Bend Street
1 1/2"	2"	3"	4"
6"	8"
AW 327 Double 1/4 Bend
1 1/2"	2"	3"
AW 331 1/4 Vent Ell
1 1/2"	2"	3"	4"
6"
AW 333 1/4 Bend Vent Street
1 1/2"	2"	3"	4"
AW 400 Sanitary Tee
1 1/2"	2"	3"	4"
6"	8"
AW 401 Sanitary Tee Reducing
2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	2" x 1 1/2" x 2"	3" x 3" x 1 1/2"
3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"	6" x 6" x 4"
8" x 8" x 4"
AW 404 Sanitary Tee Reducing, Street
1 1/2"	2"	3"
AW 428 Double Sanitary Tee
1 1/2"	2"	3"	4"
AW 429 Double Sanitary Tee Reducing
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 1 1/2" x 1 1/2"
4" x 4" x 2" x 2"	4" x 4" x 3" x 3"
AW 441 Vent Tee
1 1/2"	2"	3"	4"
AW 444X Cleanout Tee w/ Plug
1 1/2"	2"	3"	4"
6"
AW 445 Flush Cleanout Tee
1 1/2"	2"	3"	4"
6"
AW 445X Flush C/O Tee w/ Cleanout Plug
1 1/2"	2"	3"	4"
6"
AW 500 Double Fixture Fitting
1 1/2"	2"	3"
AW 501 Combination Wye & 1/8 Bend
1 1/2"	2"	3"	4"
AW 502 Combo Wye & 1/8 Bend, Rdcing (1 Piece), Hub
2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"
AW 503 Combination Wye & 1/8 Bend
2"	3"	4"	6"
8"
AW 504 Combination Wye & 1/8 Bend, Reducing 2 Pcs
6" x 6" x 3"	6" x 6" x 4"
AW 504 Combo Wye 1/8 Bend Non-Reducing 2 Pcs
1 1/2"	2"	3"	4"
6"	6" x 6" x 3"	6" x 6" x 4"	8"
AW 507 Dble Combo Wye 1/8 Bend Non-Reducing, Fabr.
1 1/2"	2"	3"	4"
6"
AW 507 Double Combo Wye & 1/8 Bend, Reducing
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"	4" x 4" x 3" x 3"
6" x 6" x 3" x 3"	6" x 6" x 4" x 4"
AW 600 Wye
1 1/2"	2"	3"	4"
6"	8"
AW 601 Reducing Wye
2" x 1 1/2" x 1 1/2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 1 1/2"	4" x 4" x 2"	4" x 4" x 3"	6" x 6" x 3"
6" x 6" x 4"	8" x 8" x 4"	8" x 8" x 6"
AW 611 Double Wye
1 1/2"	2"	3"	4"
6"
AW 612 Double Wye Reducing
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"	4" x 4" x 3" x 3"
6" x 6" x 4" x 4"
AW 700 Return Bend
1 1/2"	2"	3"	4"
6"
AW 705 S-Trap
1 1/2"	2"	3"	4"
AW 705R Running Trap
1 1/2"	2"	3"	4"
6"
AW 706X P-Trap w/ Solvent Weld Joint
1 1/2"	2"	3"	4"
6"
AW 707X P-Trap w/ Solvent Weld Joint & Clean Out
1 1/2"	2"
AW 708P P-Trap w/ Union
1 1/2"	2"
AW 711P LA P-Trap w/ Union
1 1/2"
AW 712 Jar Trap
1 1/2"
AW 712 P Jar Trap with Tail Piece Adapter
1 1/2"
AW 8530 Van Stone Flange
8"	1 1/2"	2"	3"
4"	6"
# Charlotte Pipe ChemDrain Pipe and Fittings have been Certified as a system with the Charlotte Pipe ChemDrain One-Step CPVC Solvent Cement to ASTM F2618. ^ These fitting products are also represented by the trade names: Charlotte Pipe and Foundry Company®, Charlotte®, Charlotte Pipe®, and ChemDrain Corrosive Waste Drainage System. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code.
Pipe# Þ	CPVC	ChemDrain®*	ASTM F2618
1 1/2"- 8"
# Charlotte Pipe ChemDrain Pipe and Fittings have been Certified as a system with the Charlotte Pipe ChemDrain One-Step CPVC Solvent Cement to ASTM F2618. * These pipe products are also represented by the trade names: Charlotte®, CPF®, and Charlotte Pipe®. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code.
Pipe# ¢ Þ	CPVC	ChemDrain®*	CSA 181.3
1 1/2"- 8"
# Charlotte Pipe ChemDrain Pipe and Fittings have been Certified as a system with the Charlotte Pipe ChemDrain One-Step CPVC Solvent Cement to ASTM F2618. * These pipe products are also represented by the trade names: Charlotte®, CPF®, and Charlotte Pipe®. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§ +++ [G]	CPVC 4120	Charlotte Pipe Corzan®**	ASTM F441
1/4" - 12" Sch 40
1/4" - 12" Sch 80
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** These pipe products may also be represented by the trade name: Charlotte Pipe CPVP 4120. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	Charlotte Pipe®****	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. **** These pipe products may also be represented by the trade names: Charlotte Pipe® CPVC CTS™ or Charlotte Pipe® Flowguard Gold.

COFLEX, S.A. DE C.V.
Hidalgo #602 Pte.Col. Centro C.P.
Monterrey
Nuevo Léon 64000
Mexico
52 818 389 2800

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ [1] [2] [G]	CPVC	PW, DWV, SW	Coflex Cemento para CPVC, Amarillo	ASTM F493
Solvent Cement§ [1] [2] [G]	CPVC	PW, DWV, SW	Coflex Cemento para CPVC, Amarillo	ASTM D2846
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [2] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld-On P-68 or P-70 Clear or Purple primers. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Contact Industries S. de R.L. de C.V.
Blvd. Bosques de San Isidro #2300
Colonia Bosques de San Isidro
Zapopan, JAL 45133
Mexico
52 333 656 3637
Visit this company's website

Facility : Apodaca, Mexico

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+ § [1] [2] [G]	CPVC	PW, SW, DWV	CONTACT CEMENTO DISOLVENTE AMARILLO CPVC	ASTM F493
Solvent Cement+ § [1] [2] [G]	CPVC	PW, SW, DWV	CONTACT CEMENTO DISOLVENTE PARA CPVC	ASTM F493
Solvent Cement+ § [1] [2] [G]	CPVC	PW, SW, DWV	CONTACT CEMENTO PARA CPVC	ASTM F493
Solvent Cement+ § [1] [2] [G]	CPVC	PW, SW, DWV	Cemento disolvente CPVC CONTACT	ASTM F493
Solvent Cement+ § [1] [2] [G]	CPVC	PW, SW, DWV	Cemento disolvente CPVC CONTACT 227	ASTM F493
Solvent Cement+ § [1] [2] [G]	CPVC	PW, SW, DWV	Contact CPVC	ASTM F493
Solvent Cement+ § [1] [2] [G]	CPVC	PW, SW, DWV	Contact CPVC Solvent Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and the CONTACT 212 or CONTACT 211 primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Cresline Plastic Pipe Co., Inc.
600 Cross Pointe Boulevard
Evansville, IN 47715
United States
270-826-8317

Facility : Henderson, KY

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing+++ [G]	CPVC 4120	Cresline® HC	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+++ [G]	CPVC 4120	Cresline® Flowguard Gold HC	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+++ [G]	CPVC 4120	Eagle	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+++ [G]	CPVC 4120		ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+++ [G]	CPVC 4120	Nibco	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

D-Rep Plastics Inc.
11256 47th Street North
Clearwater, FL 28110
United States
877-803-3274
407-240-4154

Facility : # 1 USA

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement+++ [1] [2] [3] [G]

CPVC

PW, DWV, SW

GM 914 Orange CPVC

ASTM F493

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld-On® P-68®, P-70® Clear or Purple, or P-72 Clear Primers.
[3] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Dura Plastic Products, Inc
533 East Third Street
Beaumont, CA 92223
United States
951-845-3161

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2] [G]	CPVC	PW, SW, DWV	i-Fuse CPVC Heavy Gray	ASTM F493
Solvent Cement! § +++ [1] [2]	CPVC	PW, SW, DWV	i-Fuse CPVC Heavy Gray	ASTM F493
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, SW, DWV	i-Fuse CPVC Heavy Orange	ASTM F493
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	i-Fuse CPVC Hot 'N Cold Medium Yellow	ASTM F493
Solvent Cement¢ *** +++ [2] [G]	CPVC	PW, SW, DWV	i-Fuse CPVC Hot 'N Cold Medium Yellow	CSA B137.6
! Product is Certified whether or not it bears the U.P. Code Mark. * Cements Certified to CSA B181.1 must be yellow in color. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Cements Certified to CSA B181.2, CSA B137.3 must be gray in color. * Cements Certified to CSA B137.6 must be clear or yellow oxide in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and i-Fuse Clear or Purple Primers. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and i-Fuse Clear or Purple Primers. [4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and i-Fuse Blue primer. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Durman Esquivel S.A.
Zona Franca Propark
Contiguo a La Dos Pinos
El Coyol De Alajuela,
Costa Rica
506-436-4700

Facility : # 1 San Jose, Costa Rica

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2]	CPVC	PW	CPVC FlowGuard Gold Low VOC Solvent Cement	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW	CPVC Solvent Cement Durman Rise	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW	WHITE CPVC FlowGuard Gold Solvent Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [2] Certified for use without primer.

* Certified color is transparent.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [1]	CPVC	Durman FlowGuard	ASTM D2846
45° Elbow (Slip)
12 mm (1/2") - (2030684)	18 mm (3/4") - (2030686)	25 mm (1") - (2030688)
90° Elbow (Slip)
12 mm (1/2") - (2030683)	18 mm (3/4") - (2030685)	25 mm (1") - (2030687)
Coupling (Slip)
12 mm (1/2") - (2030705)	18 mm (3/4") - (2030706)	25 mm (1") - (2030707)
Plug Female
12 mm (1/2") - (2030696)	18 mm (3/4") - (2030697)	25 mm (1") - (2030698)
Tee (Slip)
12 mm (1/2") - (2030699)	18 mm (3/4") - (2030700)	25 mm (1") - (2030701)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product may be marked with an alternate trade name: NICOLL.
Fittings+++ [1]	CPVC 4120	Durman Flow Guard Gold	ASTM D2846
45° Elbow (slip x slip)
1/2" - 2"
90° Combination Elbow with Ears (slip x FPT)
1/2"
90° Elbow (slip x slip)
1/2" - 2"
Cap (slip)
1/2" - 2"
Coupling (slip x slip)
1/2" - 2"
Cross Tee (slip x slip x slip x slip)
1/2"
Female Adapter (slip x FPT)
1/2" - 3/4"
Male Adapter (slip x MPT)
1/2" - 3/4"
Reducer Bushing (slip x slip)
1" x 3/4"	3/4" x 1/2"
Reducing Tee (slip x slip x slip)
3/4" x 1/2" x 1/2"	3/4" x 3/4" x 1/2"	3/4" x 1/2" x 3/4"
Tee (slip x slip x slip)
1/2" - 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product may be marked with an alternate trade name: NICOLL.
Pipe +++*	CPVC 4120	Durman Flowguard Gold Potable Water Tubing	ASTM D2846
1/2" - 2" SDR 11
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe +++*	CPVC 4120	FlowGuard	ASTM D2846
1/2" - 2" SDR 11
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe+++	CPVC 4120	FlowGuard Gold™ EcoTec	*SE 8225*
1/2" - 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe +++*	CPVC 4120	Nicoll Flowguard Gold	ASTM D2846
1/2" - 2" SDR 11
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

E-Z Weld Group LLC
1661 President Barack Obama Highway
Riviera Beach, FL 33404
United States
800-327-8460
561-844-0241
Visit this company's website

Facility : Gujarat, India

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Ajay Flowline Plus CPVC Yellow Medium Bodied All Weather Fusion Compound	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Ajay Flowline Plus CPVC Yellow Medium Bodied All Weather Fusion Compound	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	E-Z Weld 227 Low VOC One-Step Flowguard Gold Yellow Medium Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	E-Z Weld 227 Low VOC One-Step Flowguard Gold Yellow Medium Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Prince Flowguard Plus One-Step Low VOC CPVC Cement Medium Body Yellow	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Prince Flowguard Plus One-Step Low VOC CPVC Cement Medium Body Yellow	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Skipper Low VOC One-Step Flowguard Plus Yellow Medium Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Skipper Low VOC One-Step Flowguard Plus Yellow Medium Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Trubore Flowguard Plus One-Step Low VOC CPVC Cement Medium Body Yellow	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Trubore Flowguard Plus One-Step Low VOC CPVC Cement Medium Body Yellow	ASTM F493
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Empresa Mexicana de Manufacturas S.A. de C.V. DBA EMMSA
AV Pedro Ramirez Vazquez Numero Exterior
200-13 Numero Interior Piso 5 Colonia
Valle Oriente, San Pedro Garza Garcia
Nuevo Léon 66269,
Mexico
52 818 088 7495
Visit this company's website

Facility : Apodaca, Nuevo Leon, Mexico

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§ +++ [1] [G]	CPVC	EMMSA	ASTM F441
1 1/4" - 3 1/2", 6"-12" Sch 80
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product may also be marked with the following trade designations: Durafort by CRESCO and/or [Durafort by CRESCO logo] and/or CRESCO and/or [CRESCO logo]. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [1] [G]	CPVC	EMMSA	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product may also be marked with the following trade designations: Durafort by CRESCO and/or [Durafort by CRESCO logo] and/or CRESCO and/or [CRESCO logo]. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

ERA Co., Ltd. DBA ERA PIPING (ZHEJIANG) Co., Ltd.
No. 1118 Huangjiao Road
Huangyan Economic Dev Zone
Taizhou, Zhejiang
China
86 576 8429 0287
Visit this company's website

Facility : Taizhou, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [G]	CPVC	ERA	ASTM D2846
45° Elbow
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"
90° Elbow
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"
90° Elbow with Bracket
1/2"	3/4"
90° Female Thread Elbow
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CPAS018 Male and Female Elbow CPVC+++
1/2"	3/4"	1"
CPAS02 Reducing Tee+++
3/4" x 1/2" x 1/2"	3/4" x 3/4" x 1/2"	1/2" x 1/2" x 3/4"	1 " x 1/2" x 1/2"
1" x 3/4" x 3/4"
CPAS020 45° STREET ELBOW
1/2"	3/4"	1"
CPAS05 TRANSITION COUPLING+++
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CPAS08 Reducing Elbow+++
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 1"	2" x 1"
CPAS10 IPS X CTS TRANSITION BUSHING
1/2"	3/4"	1'	1 1/4"
1 1/2"	2"
Coupling
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"
Cross
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
End Cap
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
End Plug
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	3"	4"
Female Adaptor
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"
Female Elbow with Bracket
1/2"
Female Thread Tee
1/2"	3/4"	1"
Male Adaptor
1/4"	1/2"	3/4"	1"
1 1/4"	1 1/2"	2"	2 1/2"
3"	4"
Plug
1/2"	3/4"	1"
Reducing Bush
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"
Reducing Elbow
3/4" x 1/2"
Reducing Male Adaptor
3/4" x 1/2"
Reducing Ring
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	3" x 1 1/2"
3" x 2"	4" x 1 1/2"	4" x 2"	4" x 3"
Reducing Socket
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"
Reducing Tee
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"
Socket
1/2"	1/2" light	3/4"	1"
1 1/4"	1 1/2"	2"
Step Over Bend
1/2"	3/4"	1"
Straight Tee
1/2"	1/2" light	3/4"	1"
1 1/4"	1 1/2"	2"
Union
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings@	CPVC	ERA	ASTM F1970
Union
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"
@ CPVC union rated as 100psi at 180°F.
Fittings+++ [G]	CPVC	ERA	ASTM F439
45º Elbow
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"	5"	6"	8"
10"	12"
90º Elbow
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"	5"	6"	8"
10"	12"
90º Female Thread Elbow
1/2"	3/4"	2"	1 1/4"
1 1/2"	1"
CPS004 Reducing Coupling
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"
CPSII001 45° Elbow
2 1/2"	3"	4"
CPSII002 90° Elbow
2 1/2"	3"	4"
CPSII003 Coupling
2 1/2"	3"	4"
CPSII004 Reducing Coupling
4" x 3"	4" x 2 1/2"	3" x 2"	2 1/2" x 2"
2 1/2" x 1 1/2"
CPSII005 Straight Tee
2 1/2"	3"	4"
CPSII011 End Plug
2 1/2"	3"	4"
Coupling
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"	5"	6"	8"
10"	12"
Cross
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	4"	5"
6"
End Plug
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	3"	4"
5"	6"	8"	10"
12"
Female Adaptor
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"
Female Thread Tee
1/2"	3/4"	1"
Male Adaptor
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"
Reducing Ring
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	3" x 1 1/2"
3" x 2"	3" x 2 1/2"	4" x 1 1/2"	4" x 2"
4" x 3"	5" x 4"	6" x 3"	6" x 4"
6" x 5"	8" x 6"	8" x 4"	10" x 3"
10" x 4"	10" x 6"	10" x 8"	12" x 4"
12" x 6"	12" x 8"	12" x 10"
Reducing Tee
3/4" x 1/2"	2" x 1 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 3/4"	2" x 1/2"
2" x 1"	2" x 1 1/4"	1" x 1/2"	4" x 3"
4" x 2 1/2"	5" x 2"	6" x 2"	6" x 4"
8" x 4"	8" x 6"	10" x 6"	10" x 8"
12" x 8"	12" x 10"
Straight Tee
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"	2 1/2"	3"
4"	5"	6"	8"
10"	12"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC	ERA	ASTM D2846
ERA CPVC pipe
1/2“-2”
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC	ERA	ASTM F441
ERA CPVC pipe
1/2"-12"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Everflow Supplies dba-Raven Specialty Products
100 Middlesex Avenue
Suite 1A
Carteret, NJ 07008
United States
908-436-1100

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2]	CPVC	PW	Raven CPVC Cement, Heavy Body, Orange, Low VOC	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Raven CPVC Cement, Heavy Body, Gray, Low VOC	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Raven CPVC One - Step Cement, Yellow, Low VOC	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Raven CPVC Cement (Orange) - Medium Bodied	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Raven CPVC Cement (Orange) - Heavy Bodied	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Raven CPVC Cement (Gray) - Heavy Bodied	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Raven CPVC Cement One Step (Yellow) - Medium Bodied	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	Raven CPVC Cement One Step (Red) - Medium Bodied	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Raven Purple/Clear primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Everflow Supplies Inc.
100 Middlesex Avenue
Carteret, NJ 07008
United States
908-437-1100
Visit this company's website

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings	CPVC	ERA	ASTM D2846
Union
1/2" (355S012)	3/4" (355S034)	1" (355S100)

FAMA TECHNOLOGY FOUNDRY, S.A. DE C.V.
Rivapalacios #520, Col. San Humberto
Santa Catarina, Nuevo León,66120
Mexico
593 81 83160913

Facility : Zhejiang, China

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement	CPVC	PW, DWV, SW	PEGAMAXXWELD LOW VOC PVC 2439 BLUE MEDIUM BODY PLASTIC PIPE CEMENT 25 ML	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	PEGAMAXXWELD LOW VOC CPVC 2417 GREY HEAVY BODIED PLASTIC PIPE CEMENT 59 ML	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	PEGAMAXXWELD LOW VOC CPVC 2418 GREY HEAVY BODIED PLASTIC PIPE CEMENT 118 ML	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	PEGAMAXXWELD LOW VOC CPVC 2419 GREY HEAVY BODIED PLASTIC PIPE CEMENT 237 ML	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	PEGAMAXXWELD LOW VOC CPVC 2420 GREY HEAVY BODIED PLASTIC PIPE CEMENT 473 ML	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	PEGAMAXXWELD LOW VOC CPVC 2424 GREY HEAVY BODIED PLASTIC PIPE CEMENT 946 ML	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 has been determined based on the testing of pipe and fittings assembled using the cement and the 2471 /2472/2473/2474/2475/2476 primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Ferguson Enterprises LLC
12500 Jefferson Avenue
Newport News, VA 23602
United States
888-222-1785
Visit this company's website

Facility : Kaohsiung, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Valves^ +++ [G]	CPVC	FNW	ASTM F1970
True Union (double Union) ball valve
FNW350NAED 1/2"	FNW350NAEF 3/4"	FNW350NAEG 1"	FNW350NAEH 1 1/4"
FNW350NAEJ 1 1/2"	FNW350NAEK 2"	FNW350NAEL 2 1/2"	FNW350NAEM 3"
FNW350NAEP 4"	FNW350NAVD 1/2"	FNW350NAVF 3/4"	FNW350NAVG 1"
FNW350NAVH 1 1/4"	FNW350NAVJ 1 1/2"	FNW350NAVK 2"	FNW350NAVL 2 1/2"
FNW350NAVM 3"	FNW350NAVP 4"
^ CPVC true union ball vale rated at 150 PSI and 73°F +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves# +++ [G]	CPVC	Proflo	ASTM F1970
CTS Ball Valve
PFCBVND 1/2"	PFCBVNF 3/4"	PFCBVNG 1"	PFCBVNH 1 1/4"
PFCBVNJ 1 1/2"	PFCBVNK 2"
# CPVC CTS Ball Valves rated at 100 PSI and 180°F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Futura Industrial S.A. de C.V.
Av. Todos Los Santos
Parque Industrial Pacifico II
C.P. 22709 Tijuana, Baja California
Mexico
52 664 660 63 63
Visit this company's website

Facility : Baja California, Mexico

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	CPVC	FlowGuard	ASTM D2846
1/2" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	CPVC	FlowGuard	*SE 8225*
1/2" - 2" SDR 13.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Geon Performance Solutions
Avon Lake General Chemical
33587 Walker Road
Avon Lake, OH 44012
United States
440-930-1000
Visit this company's website

Facility : Terre Haute, IN

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC+++	2	MC100 Gray 2481	ASTM D1784 23447
CPVC+++	2	MC100 Tan 3189	ASTM D1784 23447
CPVC+++	2	MC100 White 1000	ASTM D1784 23447
CPVC+++	2	MC200 Black 2999	ASTM D1784 23447
CPVC+++	2	MC200 Gray 2481	ASTM D1784 23447
CPVC+++	2	MC200 Tan 3189	ASTM D1784 23447
CPVC+++	2	MC250 Gray 2481	ASTM D1784 23447
CPVC+++	2	MC270 Gray 2481	ASTM D1784 23447
CPVC+++	2	MC280 Black 2878	ASTM D1784 23447
CPVC+++	2	MC280 Gray 2124	ASTM D1784 23447
CPVC+++	2	MC280 Gray 2481	ASTM D1784 23447
CPVC+++	2	MC280 Gray 2867	ASTM D1784 23447
CPVC+++	2	MC280 Silver 2536 (T5)	ASTM D1784 23447
* Material designation may or may not include the designation "Geon". Trade designation of product may or may not be followed by either a PL or CU: PL - Pellet CU - Cube + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Fitting and appurtenance end use not to exceed 250 sq.in./L.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Facility : Avon Lake 1012, OH

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC* +++	2	MC100 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC100 Tan 3189	ASTM D1784 23447
CPVC* +++	2	MC100 White 1000	ASTM D1784 23447
CPVC* +++	2	MC200 Black 2999	ASTM D1784 23447
CPVC* +++	2	MC200 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC250 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC270 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC280 Black 2878	ASTM D1784 23447
CPVC* +++	2	MC280 Gray 2124	ASTM D1784 23447
CPVC* +++	2	MC280 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC280 Gray 2867	ASTM D1784 23447
CPVC* +++	2	MC280 Silver 2536 (T5)	ASTM D1784 23447
* Material designation may or may not include the designation "Geon". Trade designation of product may or may not be followed by either a PL or CU: PL - Pellet CU - Cube + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Fitting and appurtenance end use not to exceed 250 sq. in./L.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Facility : Geon Performance Solutions (Dongguan) Co., Ltd., Guangdong Province, China

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC* +++	2	MC100 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC100 Tan 3189	ASTM D1784 23447
CPVC* +++	2	MC100 White 1000	ASTM D1784 23447
CPVC* +++	2	MC200 Black 2999	ASTM D1784 23447
CPVC* +++	2	MC200 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC200 Tan 3189	ASTM D1784 23447
CPVC* +++	2	MC250 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC270 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC280 Black 2878	ASTM D1784 23447
CPVC* +++	2	MC280 Gray 2124	ASTM D1784 23447
CPVC* +++	2	MC280 Gray 2481	ASTM D1784 23447
CPVC* +++	2	MC280 Gray 2867	ASTM D1784 23447
CPVC* +++	2	MC280 Silver 2536 (T5)	ASTM D1784 23447
* Material designation may or may not include the designation Geon. The trade designation of the product may or may not be followed by either CU or PL: CU - Cube PL - Pellet + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Fittings and appurtenance end use not to exceed 250 sq. in./L.

Georg Fischer Harvel LLC
300 Kuebler Road
P.O. Box 757
Easton, PA 18040
United States
610-252-7355

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [2] [3] [G]	CPVC	PW, DWV, SW	SeaCor Marine Cement Gray Low VOC	ASTM D2564
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	GF CHLORFIT CPVC Cement One Step Medium Bodied Yellow Low VOC	ASTM F493
Solvent Cement¢ § *** +++ [2] [G]	CPVC	PW, DWV, SW	GF CHLORFIT CPVC Cement One Step Medium Bodied Yellow Low VOC	CSA B137.6
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	GF CHLORFIT CPVC Cement Two Step Heavy Bodied Orange Low VOC	ASTM F493
! Product is Certified whether or not it bears the U.P. Code Mark. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. *** Cements Certified to CSA B137.6 must be clear or yellow oxide in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61, Section 4. [2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and SeaCor Primer Purple Low VOC primer. [3] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Georg Fischer LLC
9271 Jeronimo Road
Irvine, CA 92618
United States
610-252-7355
Visit this company's website

Facility : Little Rock, AR

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name		Product Standard
Fittings** +++ [G]*	CPVC	+GF+ or GSR	SE 31699
45° Ell, S x S
9817-xxx
90° Ell, S x S
9806-xxx
Cap, S
9847-xxx
Coupling, S x S
9829-xxx
Reducer Bushing, Spg x S
9837-xxx
Reducer Coupling, S x S
9829-xxx
Reducing Tee, S x S x S
9801-xxx
Tee, S x S x S
9801-xxx
*** xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings@ ** +++ [G]*	CPVC	+GF+ or GSR	ASTM F439
Tee, S x S x S
9801-xxx	1/4" - 12"
Reducing Tee, S x S x S
9801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"	6" x 4"	8" x 8" x 6"
90° Ell, S x S
9806-xxx	1/4" - 12"
45° Ell, S x S
9817-xxx	1/4" - 12"
Coupling, S x S
9829-xxx	1/4" - 12"
Reducer Coupling, S x S
9829-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 1/2"
1" x 3/4"	1 1/4" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
3" x 2"	4" x 3"	6" x 4"	8" x 6"
Reducer Bushing, Spg x S
9837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 4"	8" x 6"	10" x 6"
10" x 8"	12" x 10"
Cap, S
9847-xxx	3/8" - 12"
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings** +++ [G]*	CPVC	+GF+ or GSR	ASTM F437
Tee, T x T x T
9805-xxx	1/4" - 12"
90° Ell, T x T
9808-xxx	1/4" - 12"
90° Ell, S x FPT
9807-XXX	1/2" - 1"
45° Ell, T x T
9819-xxx	1/4" - 12"
Coupling, T x T
9830-xxx	1/4" - 4"
Reducer Coupling, T x T
9830-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/2" x 1"
Female Adapter, S x T
9835-xxx	1/4" - 4"
Male Adapter, S x MT
9836-xxx	1/2" - 4"
Reducer Bushing, Spg x T
9838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"	4" x 2"
4" x 3"
Reducer Bushing, MT x T
9839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 3/8"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 3"
Cap, T
9848-xxx	1/4" - 4"
Plug, MT
9850-xxx	1/4" - 4"
Nipple, MT x MT
9861-xxx	1/4" - 2"
*** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe@ ¢ § +++ [G]	CPVC 4120	+GF+ or GSR	ASTM F441
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 40
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 80
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ or GSR	CSA B137.6
1 1/4" - 2 1/2" Sch 40
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [1] [G]	CPVC	+GF+	ASTM F1970
Flange - Van Stone (FPT) Sch 80
1" - 2" (9855-XXX)
Flange - Van Stone (S) Sch 80
1/2" - 12" (9854-XXX)
Flange - Van Stone (SPG) Sch 80
1/2" - 12" (9856-XXX)
# Product tested for use in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] XXX-indicates size [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe@ ¢ +++ [G]	CPVC 4120	ChlorFIT®	ASTM F441
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 40
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 80
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	ChlorFIT®	CSA B137.6
1 1/4" - 2 1/2" Sch 40
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings& +++	CPVC	ChlorFIT®	ASTM F1970
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
& Product tested for use in 180°F with a rated pressure of 100 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings& +++	CPVC	ChlorFIT®	CSA B137.6
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
& Product tested for use in 180°F with a rated pressure of 100 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings@ ** +++ [G]*	CPVC	ChlorFIT®	ASTM F439
45° Ell, S x S
9817-xxx	1/4" - 12"
90° Ell, S x S
9806-xxx	1/4" - 12"
Cap, S
9847-xxx	3/8" - 12"
Coupling, S x S
9829-xxx	1/4" - 12"
Reducer Bushing, Spg x S
9837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 4"	8" x 6"	10" x 6"
Reducer Coupling, S x S
9829-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 1/2"
1" x 3/4"	1 1/4" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
3" x 2"	4" x 3"	6" x 4"	8" x 6"
Reducing Tee, S x S x S
9801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"	6" x 4"	8" x 8" x 6"
Tee, S x S x S
9801-xxx	1/4" - 12"
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings** +++ [G]*	CPVC	ChlorFIT®	ASTM F437
45° Ell, T x T
9819-xxx	1/4" - 12"
90° Ell, S x FPT
9807-XXX	1/2" - 1"
90° Ell, T x T
9808-xxx	1/4" - 12"
Cap, T
9848-xxx	1/4" - 4"
Coupling, T x T
9830-xxx	1/4" - 4"
Female Adapter, S x T
9835-xxx	1/4" - 4"
Male Adapter, S x MT
9836-xxx	1/2" - 4"
Nipple, MT x MT
9861-xxx	1/4" - 2"
Plug, MT
1/4" - 4"	9850-xxx
Reducer Bushing, MT x T
9839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 3/8"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 3"
Reducer Bushing, Spg x T
9838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"	4" x 2"
4" x 3"
Reducer Coupling, T x T
9830-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/2" x 1"
Tee, T x T x T
9805-xxx	1/4" - 12"
*** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe@ ¢ +++ [G]	CPVC 4120	SeaCor®	ASTM F441
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 40
1/2" - 2", 2 1/2", 3", 4", 6", 8", 10", 12" Sch 80
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings** +++ [G]*	CPVC	SeaCor®	ASTM F437
45° Ell, T x T
9819-xxx	1/4" - 12"
90° Ell, S x FPT
9807-XXX	1/2" - 1"
90° Ell, T x T
9808-xxx	1/4" - 12"
Cap, T
9848-xxx	1/4" - 4"
Coupling, T x T
9830-xxx	1/4" - 4"
Female Adapter, S x T
9835-xxx	1/4" - 4"
Male Adapter, S x MT
9836-xxx	1/2" - 4"
Nipple, MT x MT
9861-xxx	1/4" - 2"
Plug, MT
9850-xxx	1/4" - 4"
Reducer Bushing, MT x T
9839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 3/8"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 3"
Reducer Bushing, Spg x T
9838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"	4" x 2"
4" x 3"
Reducer Coupling, T x T
9830-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/2" x 1"
Tee, T x T x T
9805-xxx	1/4" - 12"
*** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings@ ** +++ [G]*	CPVC	SeaCor®	ASTM F439
45° Ell, S x S
9817-xxx	1/4" - 12"
90° Ell, S x S
9806-xxx	1/4" - 12"
Cap, S
9847-xxx	3/8" - 12"
Coupling, S x S
9829-xxx	1/4" - 12"
Reducer Bushing, Spg x S
9837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 4"	8" x 6"	10" x 6"
Reducer Coupling, S x S
9829-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 1/2"
1" x 3/4"	1 1/4" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
3" x 2"	4" x 3"	6" x 4"	8" x 6"
Reducing Tee, S x S x S
9801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"	6" x 4"	8" x 8" x 6"
Tee, S x S x S
9801-xxx	1/4" - 12"
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®	CSA B137.6
1 1/4" - 2 1/2" Sch 40
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings& +++	CPVC	SeaCor®	ASTM F1970
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
& Product tested for use in 180°F with a rated pressure of 100 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings& +++	CPVC	SeaCor®	CSA B137.6
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
& Product tested for use in 180°F with a rated pressure of 100 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe+++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	ASTM F441
1/4" - 12" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	CSA B137.6
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings** +++ [G]*	CPVC	+GF+ Uponor ChlorFIT®	ASTM F437
Tee, T x T x T
9805-xxx	1/4" - 12"
90° Ell, T x T
9808-xxx	1/4" - 12"
90° Ell, S x FPT
9807-XXX	1/2" - 1"
45° Ell, T x T
9819-xxx	1/4" - 12"
Coupling, T x T
9830-xxx	1/4" - 4"
Reducer Coupling, T x T
9830-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/2" x 1"
Female Adapter, S x T
9835-xxx	1/4" - 4"
Male Adapter, S x MT
9836-xxx	1/2" - 4"
Reducer Bushing, Spg x T
9838-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 1/4"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1/2"	1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"
2" x 3/4"	2" x 1"	2" x 1 1/4"	2" x 1 1/2"
2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"	4" x 2"
4" x 3"
Reducer Bushing, MT x T
9839-xxx	3/8" x 1/4"	1/2" x 1/4"	1/2" x 3/8"
3/4" x 3/8"	3/4" x 1/2"	1" x 1/2"	1" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 3/4"	2" x 1"	2" x 1 1/4"
2" x 1 1/2"	3" x 2"	4" x 3"
Cap, T
9848-xxx	1/4" - 4"
Plug, MT
9850-xxx	1/4" - 4"
Nipple, MT x MT
9861-xxx	1/4" - 2"
*** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings@ ** +++ [G]*	CPVC	+GF+ Uponor ChlorFIT®	ASTM F439
Tee, S x S x S
9801-xxx	1/4" - 12"
Reducing Tee, S x S x S
9801-xxx	3/4" x 3/4" x 1/2"	1" x 1" x 1/2"	1" x 1" x 3/4"
1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"	1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"
1 1/2" x 1 1/2" x 1 1/2"	2" x 2" x 1/2"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2"
4" x 4" x 2"	4" x 4" x 3"	6" x 4"	8" x 8" x 6"
90° Ell, S x S
9806-xxx	1/4" - 12"
45° Ell, S x S
9817-xxx	1/4" - 12"
Coupling, S x S
9829-xxx	1/4" - 12"
Reducer Coupling, S x S
9829-xxx	1/2" x 3/8"	3/4" x 1/2"	1" x 1/2"
1" x 3/4"	1 1/4" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"
3" x 2"	4" x 3"	6" x 4"	8" x 6"
Reducer Bushing, Spg x S
9837-xxx	1/2" x 1/4"	1/2" x 3/8"	3/4" x 1/2"
1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"	1 1/4" x 3/4"
1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"	1 1/2" x 1"
1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"	2" x 1"
2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1 1/2"	2 1/2" x 2"
3" x 1 1/2"	3" x 2"	3" x 2 1/2"	4" x 2"
4" x 3"	6" x 4"	8" x 6"	10" x 6"
10" x 8"	12" x 10"
Cap, S
9847-xxx	3/8" - 12"
@ Fittings or systems to be installed in accordance with the manufacturer's instructions, ASTM Standard and latest edition of Uniform Plumbing Code. *** -xxx Suffix designates nominal size +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings& +++	CPVC	+GF+ Uponor ChlorFIT®	ASTM F1970
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
& Product tested for use in 180°F with a rated pressure of 100 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings& ¢ +++	CPVC	+GF+ Uponor ChlorFIT®	CSA B137.6
1/2 - 1" 90DEG Drop Ear CPVC 80 Transition (SXFPT)
1/2" - 2" Female Adapter Sch 80
1/2" - 2" Male Adapter Sch 80
& Product tested for use in 180°F with a rated pressure of 100 psi. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

% CPVC High PSI/Temp Flange Kit (S)
## All products tested for use in 73F as per the specific rated pressures per size

Facility : Bakersfield, CA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name		Product Standard
Pipe$	CPVC 4120	ChlorFIT®	SE 31699
3" - 24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.
Pipe$	CPVC 4120	.+GF+ HARVEL CPVC	SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.
Pipe$	CPVC 4120	.+GF+ Uponor ChlorFIT®	SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.
Pipe$	CPVC 4120		SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.
Pipe$	CPVC 4120	SeaCor®	SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [G]	CPVC 4120	ChlorFIT®	ASTM F441
1/4" - 24" Sch 80
1/4" - 24" Sch 40
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL CPVC	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	ASTM F441
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	ChlorFIT®	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HARVEL CPVC	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	CSA B137.6
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120		CSA B137.6
3/8" - 2" SDR 11
1 1/4 - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL BLAZEMASTER®	ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial	ASTM F442
2 1/2" - 8" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial	CSA B137.6
1 1/4" - 2 1/2" Sch 80
2 1/2" - 4" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Irvine, CA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name		Product Standard
Pipe+++ [G]	CPVC 4120		SE 8459a
1/4" - 8" Sch 40
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe	CPVC 4120	+GF+ HARVEL CPVC		ASTM D2846
3/8" - 2" SDR 11
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL BLAZEMASTER®		ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe	CPVC 4120	HARVEL CPVC		ASTM D2846
3/8" - 2" SDR 11
Pipe	CPVC 4120			ASTM D2846
3/8" - 2" SDR 11
Pipe+++ [G]	CPVC 4120	+GF+ Harvel CPVC	SE 8459a
1/4" - 8" Sch 40
1/4" - 8" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		SE 8459a
1/4" - 8" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120			ASTM D2846
3/8" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HARVEL CPVC		CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	Chlorfit		ASTM D2846
3/8" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	Chlorfit		ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	ChlorFIT®		CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	ChlorFIT®		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120			CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL CPVC		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120			ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120			ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial		ASTM F442
2 1/2" - 8" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial		CSA B137.6
1 1/4" - 2 1/2" Sch 80
2 1/2" - 4" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ CTS		ASTM D2846
3/8" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®		CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ CTS		CSA B137.6
3/8" - 2" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	SeaCor®		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Easton, PA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name		Product Standard
Pipe$	CPVC 4120	ChlorFIT®	SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.
Pipe$	CPVC 4120	.+GF+ HARVEL CPVC	SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.
Pipe$	CPVC 4120	.+GF+ Uponor ChlorFIT®	SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.
Pipe$	CPVC 4120		SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.
Pipe$	CPVC 4120	SeaCor®	SE 31699
3"-24" Sch 80
$ Socket bell ends are not tested or Listed by NSF for this production facility.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial	ASTM F442
2 1/2" - 8" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HydroKing Commercial	CSA B137.6
1 1/4" - 2 1/2" Sch 80
2 1/2" - 4" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	ChlorFIT®	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ HARVEL CPVC	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	ASTM F441
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	SeaCor®	ASTM F441
1/4" - 24" Sch 40
1/4" - 24" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120		ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	+GF+ Harvel Blazemaster	ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	ChlorFIT®	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ HARVEL CPVC	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	+GF+ Uponor ChlorFIT®	CSA B137.6
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120		CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	SeaCor®	CSA B137.6
3/8" - 2" SDR 11
1 1/4" - 2 1/2" Sch 80
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Guangdong Liansu Technology Industrial Co., Ltd. DBA Lesso America, Inc.
Liansu Industrial Estate
Longjiang Town, Shunde Zone
Foshan, Guangdong 528318
China
86 757 2388 8337
Visit this company's website

Facility : # 2 China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# ¢ § +++ [G]	CPVC	Lesso	ASTM D2846
45° Elbow
CP4117-005 1/2" 45°Ell (SOC x SOC)	CP4117-007 3/4" 45°Ell (SOC x SOC)	CP4117-010 1" 45°Ell (SOC x SOC)	CP4117-012 1-1/4" 45°Ell (SOC x SOC)
CP4117-015 1-1/2" 45°Ell (SOC x SOC)	CP4117-020 2" 45°Ell (SOC × SOC)
90° Elbow
CP4106-005 1/2" 90°Ell (SOC x SOC)	CP4106-007 3/4" 90°Ell (SOC x SOC)	CP4106-010 1" 90°Ell (SOC x SOC)	CP4106-012 1-1/4"90°Ell (SOC x SOC)
CP4106-015 1-1/2"90°Ell (SOC x SOC)	CP4106-020 2" 90°Ell (SOC x SOC)
90° Reducing Elbow
CP4106-101 3/4"x1/2" 90°Reducing Ell (SOC x SOC)
90° Street Elbow
CP4109-005 1/2" 90° Street Ell (SPIG x SOC)	CP4109-007 3/4" 90° Street Ell (SPIG x SOC)	CP4109-010 1" 90° Street Ell (SPIG x SOC)	CP4127-005 1/2" 45° Street Ell (SPIG x SOC)
CP4127-007 3/4" 45° Street Ell (SPIG x SOC)	CP4127-010 1" 45° Street Ell (SPIG x SOC)
Cap
CP4147-005 1/2" Cap (SOC)	CP4147-007 3/4" Cap (SOC)	CP4147-010 1" Cap (SOC)	CP4147-012 1-1/4" Cap (SOC)
CP4147-015 1-1/2" Cap (SOC)	CP4147-020 2" Cap (SOC)
Coupling
CP4129-005 1/2" Coupling (SOC x SOC)	CP4129-007 3/4" Coupling (SOC x SOC)	CP4129-010 1" Coupling (SOC x SOC)	CP4129-012 1-1/4" Coupling (SOC x SOC)
CP4129-015 1-1/2" Coupling (SOC x SOC)	CP4129-020 2" Coupling (SOC x SOC)
Drop Ear 90° Ell w/ Bracket
CPDE4106-005 1/2" Drop Ear 90°Ell w/Bracket (SOC x SOC)
Drop Ear 90° Ell
CPDE4107-005SS 1/2" Drop Ear 90°Ell (SOC x METAL FIPT)
Female Adapter
CP4135-007SS 3/4" Female Adapter (SOC x METAL FIPT)	CP4135-005SS 1/2" Female Adapter (SOC x METAL FIPT)
Male Adapter
CP4136-005 1/2" Male Adapter (SOC x MIPT)	CP4136-005SS 1/2" Male Adapter (SOC x METAL MIPT)	CP4136-007 3/4" Male Adapter (SOC x MIPT)	CP4136-007SS 3/4" Male Adapter (SOC x METAL MIPT)
CP4136-010 1" Male Adapter (SOC x MIPT)	CP4136-010SS 1" Male Adapter (SOC x METAL MIPT)	CP4136-012 1-1/4" Male Adapter (SOC x MIPT)
Reducing Bushing
CP4137-101 3/4"x1/2" Reducing Bushing (SPIG x SOC)	CP4137-130 1"x1/2" Reducing Bushing (SPIG x SOC)	CP4137-131 1"x3/4" Reducing Bushing (SPIG x SOC)	CP4137-166 1-1/4"x1/2" Reducing Bushing (SPIG x SOC)
CP4137-167 1-1/4"x3/4" Reducing Bushing (SPIG x SOC)	CP4137-168 1-1/4"x1" Reducing Bushing (SPIG x SOC)	CP4137-209 1-1/2"x1/2" Reducing Bushing (SPIG x SOC)	CP4137-210 1-1/2"x3/4" Reducing Bushing (SPIG x SOC)
CP4137-211 1-1/2"x1" Reducing Bushing (SPIG x SOC)	CP4137-212 1-1/2"x1-1/4" Reducing Bushing (SPIG x SOC)	CP4137-248 2"x3/4" Reducing Bushing (SPIG x SOC)	CP4137-249 2"x1" Reducing Bushing (SPIG x SOC)
CP4137-250 2"x1-1/4" Reducing Bushing (SPIG x SOC)	CP4137-251 2"x1-1/2" Reducing Bushing (SPIG x SOC)	CP4140-007 3/4" Transition Bushing (IPS SPIG x CTS SOC)	CP4140-010 1" Transition Bushing (IPS SPIG x CTS SOC)
CP4140-012 1-1/4" Transition Bushing (IPS SPIG x CTS SOC)	CP4140-015 1-1/2" Transition Bushing (IPS SPIG x CTS SOC)	CP4140-020 2" Transition Bushing (IPS SPIG x CTS SOC)
Reducing Coupling
CP4129-101 3/4"x1/2" Reducing Coupling (SOC x SOC)	CP4129-131 1"x3/4" Reducing Coupling (SOC x SOC)	CP4129-166 1-1/4"x1/2" Reducing Coupling (SOC x SOC)	CP4129-248 2"x3/4" Reducing Coupling (SOC x SOC)
CP4129-249 2"x1" Reducing Coupling (SOC x SOC)	CP4129-250 2"x1-1/4" Reducing Coupling (SOC x SOC)	CP4129-251 2"x1-1/2" Reducing Coupling (SOC x SOC)
Reducing Tee
CP4101-074 1/2"x1/2"x3/4" Reducing Tee (SOC x SOC x SOC)	CP4101-094 3/4"x1/2"x1/2" Reducing Tee (SOC x SOC x SOC)	CP4101-095 3/4"x1/2"x3/4" Reducing Tee (SOC x SOC x SOC)	CP4101-101 3/4"x3/4"x1/2" Reducing Tee (SOC x SOC x SOC)
CP4101-102 3/4"x3/4"x1" Reducing Tee (SOC x SOC x SOC)	CP4101-125 1"x3/4"x3/4" Reducing Tee (SOC x SOC x SOC)	CP4101-130 1"x1"x1/2" Reducing Tee (SOC x SOC x SOC)	CP4101-131 1"x1"x3/4" Reducing Tee (SOC x SOC x SOC)
CP4101-167 1-1/4"x1-1/4"x3/4" Reducing Tee (SOC x SOC x SOC)	CP4101-168 1-1/4"x1-1/4"x1" Reducing Tee (SOC x SOC x SOC)	CP4101-209 1-1/2"x1-1/2"x1/2" Reducing Tee (SOC x SOC x SOC)	CP4101-210 1-1/2"x1-1/2"x3/4" Reducing Tee (SOC x SOC x SOC)
CP4101-211 1-1/2"x1-1/2"x1" Reducing Tee (SOC x SOC x SOC)	CP4101-247 2"x2"x1/2" Reducing Tee (SOC x SOC x SOC)	CP4101-248 2"x2"x3/4" Reducing Tee (SOC x SOC x SOC)	CP4101-249 2"x2"x1" Reducing Tee (SOC x SOC x SOC)
CP4101-250 2"x2"x1-1/4" Reducing Tee (SOC x SOC x SOC)	CP4101-251 2"x2"x1-1/2" Reducing Tee (SOC x SOC x SOC)
Tee
CP4101-005 1/2" Tee (SOC x SOC x SOC)	CP4101-007 3/4" Tee (SOC x SOC x SOC)	CP4101-010 1" Tee (SOC x SOC x SOC)	CP4101-012 1-1/4" Tee (SOC x SOC x SOC)
CP4101-015 1-1/2" Tee (SOC x SOC x SOC)	CP4101-020 2" Tee (SOC x SOC x SOC)
Transition Coupling
CP4141-007 3/4" Transition Coupling (IPS SOC x CTS SOC)
# This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# § +++ [G]	CPVC	Lesso	ASTM D2846
CPVC PIPE 1/2"-2"[9]
[9] Certification includes the following: 1/2"-2" CPVC SDR 11 Pipe CP11P-005 1/2" CP11P-007 3/4" CP11P-010 1" CP11P-012 1-1/4" CP11P-015 1-1/2" CP11P-020 2" # This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Hajoca Corporation
127 Coulter Avenue
Ardmore, PA 19003
United States
225-295-4212

Facility : # 10 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Mainline® CPVC Orange Regular Bodied Solvent Cement	ASTM F493
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Mainline® CPVC Gray Heavy Bodied Solvent Cement	ASTM F493
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Mainline® CPVC Orange Heavy Bodied Solvent Cement	ASTM F493
Solvent Cement* +++ [2] [G]	CPVC	PW, DWV, SW	Mainline® CPVC Flowguard Gold® Yellow Medium Bodied Solvent Cement	ASTM F493
* This cement is yellow color. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Mainline™ Clear Primer for PVC and CPVC or Mainline™ Purple Primer for PVC and CPVC. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Hajoca Corporation
2001 Joshua Road
Lafayette Hill, PA 19444
United States
704-296-4509
Visit this company's website

Facility : Hartsville, TN

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement* +++ [2] [G]	CPVC	PW, DWV, SW	Mainline® CPVC Flowguard Gold® Yellow Medium Bodied Solvent Cement	ASTM F493
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Mainline® CPVC Gray Heavy Bodied Solvent Cement	ASTM F493
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Mainline® CPVC Orange Heavy Bodied Solvent Cement	ASTM F493
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Mainline® CPVC Orange Regular Bodied Solvent Cement	ASTM F493
* This cement is yellow color. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Mainline Clear Primer for PVC and CPVC or Mainline Purple Primer for PVC and CPVC [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings assembled using the cement with primer. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Hanwha Solutions Corporation
Hanwha Building, 86 Cheonggyechen-ro
Jung-gu, Seoul 04541
Republic of Korea
82 2 729 1456
Visit this company's website

Facility : Chungcheongbuk, Republic of Korea

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC ++	2	CPVC Compound HCM-WF203N[G]	ASTM D1784 24447
CPVC 4120-06++	1	CPVC Compound HCM-WP103N[G]	ASTM D1784 24447
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

HCC Holdings Inc.
4700 West 160th Street
Cleveland, OH 44135
United States
216-267-7100

Facility : Omaha, NE

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Hercules CPVC Gold Cement Low VOC	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Hercules Multi-Purpose Milky/Gold - Low VOC	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Hercules Orange Medium Body Fast-Set CPVC - Low VOC	ASTM F493
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Oatey Purple Primer. [2] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Facility : Cleveland, OH

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Hercules CPVC Gold Cement Low VOC	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Hercules Multi-Purpose Milky/Gold - Low VOC	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Hercules Orange Medium Body Fast-Set CPVC - Low VOC	ASTM F493
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Oatey Purple Primer. [2] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Hershey Valve Company, Ltd.
No. 16 Jing 2nd Road
Wuchi Town, Taichung 435
Taiwan
886 42 639 2777
Visit this company's website

Facility : Taichung, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [G]	CPVC 4120	Hershey Pipe	ASTM F441
1/2" - 4" Sch 80
1/2" - 4" Sch 40
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	Hershey Pipe	ASTM F442
1/2" - 4" SDR 11
1/2" - 4" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	Hershey Pipe	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Homewerks Worldwide, LLC
55 Albrecht Drive
Lake Bluff, IL 60044
United States
224-543-1500
Visit this company's website

Facility : Huangyan, Taizhou, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [G]	CPVC	Homewerks	ASTM D2846
45° Elbow
FCP E45-2	FCP E45-12	FCP E45-114	FCP E45-112
FCP E45-34	FCP E45-1
90° Elbow
FCP E90-12	FCP E90-2	FCP E90-34	FCP E90-1
FCP E90-112	FCP E90-114
Coupling
FCP CO-1	FCP CO-112	FCP CO-114	FCP CO-2
FCP CO-34	FCP CO-12
End Cap
FCP CA-12	FCP CA-2	FCP CA-34	FCP CA-112
FCP CA-114	FCP CA-1
Female Adaptor
FCP FA-114	FCP FA-34	FCP FA-12	FCP FA-2
FCP FA-112	FCP FA-1
Female Elbow with Bracket
FCP FDE-12
Male Adaptor
FCP MA-112	FCP MA-1	FCP MA-12	FCP MA-2
FCP MA-34	FCP MA-114
Reducing Bush
FCP B-3412
Reducing Socket
FCP RC-3412
Straight Tee
FCP T-34	FCP T-2	FCP T-114	FCP T-112
FCP T-1	FCP T-12
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

HP Adhesives Ltd.
11, Unique House, Chakala Cross Road
Mumbai, Maharashtra 022
Mumbai, MM 200022
India
91 22 28 374 792
Visit this company's website

Facility : Maharashtra, India

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	314 HEXALINK CPVC SOLVENT CEMENT HEAVY DUTY	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	314 Strong Weld CPVC Solvent Cement Heavy Duty	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	914 HP CPVC SOLVENT CEMENT HEAVY DUTY	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	HINDWARE TRUFLO CPVC SOLVENT CEMENT HEAVY DUTY	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [2] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61, Section 4. [3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and P48 Strong Weld Primer M1.

Hydro & Seal UK Corp.
34 Timberline Trail
Aurora, ON L4G 6A5
Canada
647-936-9494
Visit this company's website

Facility : # 1 China

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+ § [1] [2]	CPVC	PW, DWV, SW	Low VOC CPVC CP-65 Orange Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	Low VOC CPVC CP-66 Yellow Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	Low VOC CPVC CP-66 Yellow Medium Bodied Plastic Pipe Cement	CSA B137.6
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	Low VOC CPVC CP-70 Orange Heavy Bodied Plastic Pipe Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 has been determined based on the testing of pipe and fittings assembled using the cement and the P-1030 or P-1050 primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Hydroseal Canada Incorporated
108 West 13th Street
Wilmington, DE 19801
United States
302-298-0822
Visit this company's website

Facility : Zhejiang, China

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	40 Callibre CPVC Cement Orange	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	45 Callibre CPVC Cement Grey	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for use with 90 Callibre Primer Clear or 90 Callibre Primer Purple. [2] This product is acceptable for use with pipe and fittings sized 1/2” and greater diameter.

Interplast Co. Ltd.
P.B. No.355087
Riyadh
11383
Saudi Arabia
966 11 265 1988

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	Cosmoplast 714 CPVC Heavy Duty Orange Cement	ASTM D2846
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	Cosmoplast 714 CPVC Heavy Duty Orange Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [2] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld-On P-68 or P-70 Clear or Purple primers. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

IPEX Incorporated
3 Place Du Commerce, Suite 101
Île-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : London, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [1] [G]	CPVC	Xirtec CPVC	ASTM F439
45° Elbow Sch 80
10" (059087)	12" (059088)
90° Elbow Sch 80
10" (059085)	12" (059086)
Cap Sch 80
8" (059029)
Reducer Sch 80
10" x 8" (059036)
Tees Sch 80
10" (059062)	12" (059084)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Toronto, Ontario, Canada

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Fittings~ [1] [2] [3]	CPVC	IPEX (Aquarise)	CAN/ULC S102.2
Adapter (IPS S x CTS S)
359100 1/2"	359101 3/4"
Adapter (IPS SOC x CTS S)
359098 3/4"	359097 1/2"
45° Elbow (Soc x Soc)
359164 1/2"	359165 3/4"	359166 1"	359167 1 1/4"
359168 1 1/2"	359169 2"	359170 2 1/2"	359171 3"
359172 4"	359173 6"
90° Elbow (Soc x Soc)
359194 1/2"	359195 3/4"	359196 1"	359197 1 1/4
359198 1 1/2"	359199 2"	359200 2 1/2"	359201 3"
359202 4"	359203 6"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Cap (Soc)
359109 1/2"	359110 3/4"	359111 1"	359112 1 1/4"
359113 1 1/2"	359114 2"	359115 2 1/2"	359116 3"
359107 4"	359108 6"
Female Adapter, SOC x FPT
359800 1/2"	359801 3/4"	359803 1 1/4"	359804 1 1/2"
359805 2"
Female Adapter, SP x FPT
359820 1/2"	359821 3/4"	359822 1"
Flange x Socket
359228 1/2"	359229 3/4"	359230 1"	359231 1 1/4"
359232 1 1/2"	359233 2"	359040 2 1/2"	359234 2 1/2"
359041 3"	359235 3"	359043 4"	359236 4"
359042 6"	359238 6"
Coupling (Soc x Soc)
359132 1/2"	359133 3/4"	359134 1"	359135 1 1/4"
359136 1 1/2"	359137 2"	359138 2 1/2"	359139 3"
359140 4"	359141 6"
Male Adapter, SOC x MPT
359811 1/2"	359812 3/4"	359813 1"	359814 1 1/4"
359815 1 1/2"	359816 2"
Male Adapter, SP x MPT
359823 1/2"	359824 3/4"	359825 1"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"	359378 1 1/4" x 1/2"
359379 1 1/4" x 3/4"	359380 1 1/4" x 1"	359381 1 1/2" x 1/2"	359382 1 1/2" x 3/4"
359383 1 1/2" x 1"	359384 1 1/2" x 1 1/4"	359385 2" x 1/2"	359386 2" x 3/4"
359387 2" x 1"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359390 2 1/2" x 3/4"
359391 2 1/2" x 1"	359392 2 1/2" x 2"	359393 3" x 1 1/2"	359394 3" x 2"
359395 3" x 2 1/2"	359428 4" x 1 1 /4"	359429 4" x 1 1/2"	359396 4" x 2"
359430 4" x 2 1/2"	359397 4" x 3"	359398 6" x 2"	359399 6" x 3"
359400 6" x 4"
Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"	359463 1 1/4" x 1"
359465 1 1/2" x 1"	359466 1 1/2" x 1 1/4"	359467 2" x 1"	359458 2" x 1 1/2"
359470 3" x 2"	359459 4" x 2"	359472 4" x 3"	359510 6" x 6" x 2"
359511 6" x 6" x 3"	359512 6" x 6" x 4"
Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4"	359514 3/4" x 1/2" x 1/2"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"	359495 1 1/4" x 1 1/4" x 1"	359515 1 1/2" x 1 1/2" x 1/2"	359496 1 1/2" x 1 1/2" x 3/4"
359497 1 1/2" x 1 1/2" x 1"	359498 2" x 2" x 1/2"	359499 2" x 2" x 3/4"	359500 2" x 2" x 1"
359501 2" x 2" x 1 1/2"	359503 2 1/2" x 2 1/2" x 1/2"	359504 2 1/2" x 2 1/2" x 3/4"	359505 2 1/2" x 2 1/2" x 1"
359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"	359502 3" x 3" x 2"	359508 4" x 4" x 2"
359509 4" x 4" x 3"
Tee (Soc x Soc x Soc)
359481 1/2"	359482 3/4"	359483 1"	359484 1 1/4"
359485 1 1/2"	359486 2"	359487 2 1/2"	359488 3"
359489 4"	359490 6"
Union (S x S)
359520 1/2"	359521 3/4"	359522 1"	359523 1 1/4"
359524 1 1/2"	359525 2"	359051 3"	359550 4"
Van Stone Style Flange 150 lbs.
359268 3"	359266 1 1/2"	359267 2"	359270 4"
~ Product is authorized to bear the cNSF Mark. [1] AquaRise pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50 [3] Product may be marked with the "IPEX" trade name only.
Pipe~ [1] [2] [3]	CPVC 4120	IPEX (Aquarise)	CAN/ULC S102.2
1/2" - 6" SDR 11
1 1/2" - 6" SDR 21
~ Product is authorized to bear the cNSF Mark. [1] AquaRise pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50 [3] Product may be marked with the "IPEX" trade name only.
Fitting Compounds[2]	CPVC 4120	AquaRise	CAN/ULC S102.2
Nominal 2.7 to 20 mm thick
[2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50
Pipe Compound[2]	CPVC 4120	AquaRise	CAN/ULC S102.2
Nominal 1.9 to 17 mm thick
[2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50

NOTE: Only products bearing the NSF Mark are NSF Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F438
45° Elbow (Soc x Soc)
359164 1/2"	359165 3/4"	359166 1"
90° Elbow (Soc x Soc)
359194 1/2"	359195 3/4"	359196 1"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Adapter (IPS S x CTS S)
359101 3/4"	359100 1/2"
Adapter (IPS SOC x CTS S)
359097 1/2"	359098 3/4"
Cap (Soc)
359109 1/2"	359110 3/4"	359111 1"
Coupling (Soc x Soc)
359132 1/2"	359133 3/4"	359134 1"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"
Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"
Reducing Tee (S x S x S)
359514 3/4" x 1/2" x 1/2"	359513 3/4" x 1/2" x 3/4"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"
Tee (Soc x Soc x Soc)
359481 1/2"	359482 3/4"	359483 1"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F439
45° Elbow (Soc x Soc)
359167 1 1/4"	359168 1 1/2"	359169 2"	359170 2 1/2"
359171 3"	359172 4"	359173 6"
90° Elbow (Soc x Soc)
359197 1 1/4"	359198 1 1/2"	359199 2"	359200 2 1/2"
359201 3"	359202 4"	359203 6"
Cap (Soc)
359112 1 1/4"	359113 1 1/2"	359114 2"	359115 2 1/2"
359116 3"	359107 4"	359108 6"
Coupling (Soc x Soc)
359135 1 1/4"	359136 1 1/2"	359137 2"	359138 2 1/2"
359139 3"	359140 4"	359141 6"
Reducer Bushing (Sp x Soc)
359384 1 1/2" x 1 1/4"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359392 2 1/2" x 2"
359393 3" x 1 1/2"	359394 3" x 2"	359395 3" x 2 1/2"	359428 4" x 1 1 /4"
359429 4" x 1 1/2"	359396 4" x 2"	359430 4" x 2 1/2"	359397 4" x 3"
359398 6" x 2"	359399 6" x 3"	359400 6" x 4"
Reducer Coupling (Soc x Soc)
359466 1 1/2" x 1 1/4"	359458 2" x 1 1/2"	359470 3" x 2"	359459 4" x 2"
359472 4" x 3"
Reducing Tee (S x S x S)
359501 2" x 2" x 1 1/2"	359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"	359502 3" x 3" x 2"
359508 4" x 4" x 2"	359509 4" x 4" x 3"	359510 6" x 6" x 2"	359511 6" x 6" x 3"
359512 6" x 6" x 4"
Sweep Fitting (S x S)[1]
091834 1 1/2"	091835 2"	091836 2 1/2"
Tee (Soc x Soc x Soc)
359484 1 1/4"	359485 1 1/2"	359486 2"	359487 2 1/2"
359488 3"	359489 4"	359490 6"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Union (S x S)
359520 1/2"	359521 3/4"	359522 1"	359523 1 1/4"
359524 1 1/2"	359525 2"	359051 3"	359550 4"
Van Stone Style Flange 150 lbs.
359266 1 1/2"	359267 2"	359268 3"	359270 4"
# Product tested for uses in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings## +++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Flange x Socket
359040 2 1/2"	359041 3"	359043 4"	359042 6"
## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [2] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Flange x Socket
359228 1/2"	359229 3/4"	359230 1"	359231 1 1/4"
359232 1 1/2"	359233 2"	359234 2 1/2"	359235 3"
359236 4"	359238 6"
# Product tested for uses in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G] #####	CPVC	IPEX (AquaRise)	ASTM F1970
Reducer Coupling (Soc x Soc)
359463 1 1/4" x 1"	359465 1 1/2" x 1"	359467 2" x 1"
Reducing Bushing (Sp x Soc)
359378 1 1/4" x 1/2"	359379 1 1/4" x 3/4"	359380 1 1/4" x 1"	359381 1 1/2" x 1/2"
359382 1 1/2" x 3/4"	359383 1 1/2" x 1"	359385 2" x 1/2"	359386 2" x 3/4"
359387 2" x 1"	359390 2 1/2" x 3/4"	359391 2 1/2" x 1"
Reducing Tee (S x S x S)
359495 1 1/4" x 1 1/4" x 1"	359515 1 1/2" x 1 1/2" x 1/2"	359496 1 1/2" x 1 1/2" x 3/4"	359497 1 1/2" x 1 1/2" x 1"
359498 2" x 2" x 1/2"	359499 2" x 2" x 3/4"	359500 2" x 2" x 1"	359503 2 1/2" x 2 1/2" x 1/2"
359504 2 1/2" x 2 1/2" x 3/4"	359505 2 1/2" x 2 1/2" x 1"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. ##### Product tested for uses in 73°F with a rated pressure of 400 psi per ASTM F1970, and 180°F with a rated pressure of 100 psi per CSA B137.6.
Fittings¢ +++ [2] [G]	CPVC	IPEX (AquaRise)	CSA B137.6
45° Elbow (Soc x Soc)
359164 1/2"	359165 3/4"	359166 1"	359167 1 1/4"
359168 1 1/2"	359169 2"	359170 2 1/2"	359171 3"
359172 4"	359173 6"
90° Elbow (Soc x Soc)
359194 1/2"	359195 3/4"	359196 1"	359197 1 1/4"
359198 1 1/2"	359199 2"	359200 2 1/2"	359201 3"
359202 4"	359203 6"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Adapter (IPS S x CTS S)
359100 1/2"	359101 3/4"
Adapter (IPS SOC x CTS S)
359097 1/2"	359098 3/4"
Cap (Soc)
359109 1/2"	359110 3/4"	359111 1"	359112 1 1/4"
359113 1 1/2"	359114 2"	359115 2 1/2"	359116 3"
359107 4"	359108 6"
Coupling (Soc x Soc)
359132 1/2"	359133 3/4"	359134 1"	359135 1 1/4"
359136 1 1/2"	359137 2"	359138 2 1/2"	359139 3"
359140 4"	359141 6"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (Sp x Soc)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"	359378 1 1/4" x 1/2"
359379 1 1/4" x 3/4"	359380 1 1/4" x 1"	359381 1 1/2" x 1/2"	359382 1 1/2" x 3/4"
359383 1 1/2" x 1"	359384 1 1/2" x 1 1/4"	359385 2" x 1/2"	359386 2" x 3/4"
359387 2" x 1"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359390 2 1/2" x 3/4"
359391 2 1/2" x 1"	359392 2 1/2" x 2"	359393 3" x 1 1/2"	359394 3" x 2"
359395 3" x 2 1/2"	359428 4" x 1 1 /4"	359429 4" x 1 1/2"	359396 4" x 2"
359430 4" x 2 1/2"	359397 4" x 3"	359398 6" x 2"	359399 6" x 3"
359400 6" x 4"
Reducer Coupling (Soc x Soc)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"	359463 1 1/4" x 1"
359465 1 1/2" x 1"	359466 1 1/2" x 1 1/4"	359467 2" x 1"	359458 2" x 1 1/2"
359470 3" x 2"	359459 4" x 2"	359472 4" x 3"
Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4"	359514 3/4" x 1/2" x 1/2"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"	359495 1 1/4" x 1 1/4" x 1"	359515 1 1/2" x 1 1/2" x 1/2"	359496 1 1/2" x 1 1/2" x 3/4"
359497 1 1/2" x 1 1/2" x 1"	359498 2" x 2" x 1/2"	359499 2" x 2" x 3/4"	359500 2" x 2" x 1"
359501 2" x 2" x 1 1/2"	359503 2 1/2" x 2 1/2" x 1/2"	359504 2 1/2" x 2 1/2" x 3/4"	359505 2 1/2" x 2 1/2" x 1"
359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"	359502 3" x 3" x 2"	359508 4" x 4" x 2"
359509 4" x 4" x 3"	359510 6" x 6" x 2"	359511 6" x 6" x 3"	359512 6" x 6" x 4"
Sweep Fitting (S x S)[1]
091834 1 1/2"	091835 2"	091836 2 1/2"
Tee (Soc x Soc x Soc)
359481 1/2"	359482 3/4"	359483 1"	359484 1 1/4"
359485 1 1/2"	359486 2"	359487 2 1/2"	359488 3"
359489 4"	359490 6"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings¢ ## +++ [2] [G]	CPVC	IPEX (AquaRise)	CSA B137.6
Flange x Socket
359040 2 1/2"	359041 3"	359043 4"	359042 6"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G]	CPVC	Xirtec CPVC	ASTM F439
90° Ell, S x S
059202 4"
Sweep Fitting (S x S)[1]
091934 1 1/2"	091935 2"	091936 2 1/2"
Tee, S x S x S
059486 2"	059487 2 1/2"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [2] [G]	CPVC	Xirtec CPVC	ASTM F1970
Union (FPT x FPT) Sch 80
1/2" - 4"
Union (S x S) Sch 80
1/2" - 4"
# Product tested for uses in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [2] [G]	CPVC	Xirtec CPVC	ASTM F1970
Blind Flange
059254 1 1/2"	059255 2"	059257 3"	059258 4"
Flange x FPT
059245 2"
Flange x Socket
1/2" - 2"	059232 1 1/2"	059233 2"	059234 2 1/2"
059235 3"	059236 4"	059238 6"
HD Vanstone Flange
059711 1/2"	059712 3/4"	059713 1"	059714 1 1/4"
059715 2 1/2"
# Product tested for uses in 73°F with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [2] [G]	CPVC	Xirtec CPVC	ASTM F437
45° Elbow, FPT x FPT
059178 1/2"	059179 3/4"	059180 1"	059181 1 1/4"
059182 1 1/2"	059183 2"
90° Elbow, FPT x FPT
059208 1/2"	059209 3/4"	059210 1"	059215 3"
Cap, FPT
059123 1"	059125 1 1/2"	059126 2"
Reducing Bushing, MPT x FPT
059407 3/4" x 1/2"	059408 1" x 1/2"	059409 1" x 3/4"
Tee, FPT x FPT x FPT
059509 1/2"	059510 3/4"	059511 1"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product may be marked with the "IPEX" trade name only. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [4] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Pipe Anchors , S x S
1 1/2" (359121)	2" (359122)	2 1/2" (359123)	3" (359124)
4" (359125)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [4] Product tested for use in 73°F with a rated pressure of 400 psi. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [3] [G]	CPVC	Xirtec CPVC	ASTM F1970
Pipe Anchors, S x S
059924 1 1/2" [470 psi]	059925 2" [400 psi]	059926 2 1/2" [420 psi]	059927 3" [370 psi]
059928 4" [320 psi]
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product tested for uses in 73F as per the specific rated pressures per size. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

IPEX Incorporated
3 Place Du Commerce, Suite 101
Île-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [3] [G]	CPVC	PW	BlazeMaster BM-3 Cement	ASTM F493
Solvent Cement+++ [1] [3] [G]	CPVC	PW	BlazeMaster BM-4 "One-Step"	ASTM F493
Solvent Cement+++ [1] [3] [G]	CPVC	PW	BlazeMaster BM-5 One Step Low VOC CPVC Cement	ASTM F493
Solvent Cement+++ [1] [3] [G]	CPVC	PW	BlazeMaster BM5 One Step Cement Heavy Bodied Red Low VOC	ASTM F493
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW	IPEX 14 Orange CPVC	ASTM F493
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW	IPEX AquaRise™ Cement	ASTM F493
Solvent Cement! § +++ [1] [3] [G]	CPVC	PW, DWV, SW	AquaRise™ CPVC One Step Cement Medium Bodied Yellow Low VOC	ASTM F493
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW, DWV, SW	AquaRise™ CPVC Two Step Cement Heavy Bodied Yellow Low VOC	ASTM F493
Solvent Cement¢ *** +++ [1] [2] [3] [G]	CPVC	PW	IPEX AquaRise™ Cement	CSA B137.6
Solvent Cement¢ *** +++ [1] [3] [G]	CPVC	PW, DWV, SW	AquaRise™ CPVC One Step Cement Medium Bodied Yellow Low VOC	CSA B137.6
Solvent Cement¢ *** +++ [1] [2] [3] [G]	CPVC	PW, DWV, SW	AquaRise™CPVC Two Step Cement Heavy Bodied Yellow Low VOC	CSA B137.6
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW, DWV, SW	IPEX AquaRise™ CPVC Two Step Cement, Heavy Bodied, Orange, Low VOC	ASTM F493
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW	IPEX CPVC - DURALON Platinum® Amarillo Cemento	ASTM F493
Solvent Cement¢ *** +++ [1] [2] [3] [G]	CPVC	PW	IPEX CPVC - DURALON Platinum® Amarillo Cemento	CSA B137.6
Solvent Cement¢ *** +++ [1] [3] [G]	CPVC	PW	IPEX FlowGuard Gold® Low-VOC One Step CPVC Cement	CSA B137.6
Solvent Cement+++ [1] [3] [G]	CPVC	PW	IPEX FlowGuard Gold® Low-VOC One Step CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3] [G]	CPVC	PW, DWV, SW	Xirtec 24 Orange Heavy Bodied CPVC	ASTM F493
Solvent Cement+ ¢ ** [1] [2] [3] [G]	CPVC	PW, DWV, SW	Xirtec 24 CPVC Cement Heavy Bodied Orange Low VOC	ASTM F493
! Product is Certified whether or not it bears the U.P. Code Mark. * Cements Certified to CSA B181.1 must be yellow in color. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Cements Certified to CSA B181.2, CSA B137.3 must be gray in color. * Cements Certified to CSA B137.6 must be clear or yellow oxide in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61, Section 4. [2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either the AquaRise Primer or IPEX 70 Purple/Clear Primer. [3] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

IPEX Incorporated
3 Place Du Commerce
Suite 101 Îles-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Casella, Genova, Italy

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Valves§ +++ [1] [2] [3] [G]	CPVC	AquaRise One-Piece Ball Valves	ASTM F1970
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Products are tested and certified for use with IPEX Aquarise piping system components. [2] Certified valve sizes 1/2 - 2 in. [3] CPVC ball valves certified to ASTM F1970, CSA B137.6 and UP/IP code. Temperature and pressure rating of 100psi at 180°F and 400psi at 73°F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves§ +++ [1] [2] [3] [G]	CPVC	AquaRise One-Piece Ball Valves	CSA B137.6
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Products are tested and certified for use with IPEX Aquarise piping system components. [2] Certified valve sizes 1/2 - 2 in. [3] CPVC ball valves certified to ASTM F1970, CSA B137.6 and UP/IP code. Temperature and pressure rating of 100psi at 180°F and 400psi at 73°F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves+++ [1] [4] [5] [G]	CPVC	AquaRise True Union Ball Valves	ASTM F1970
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Products are tested and certified for use with IPEX Aquarise piping system components. [4] Certified valve sizes 1/2 - 4 in. [5] CPVC ball valves certified to ASTM F1970 with Temperature and pressure rating of 232 psi at 73°F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves§ +++ [2] [6] [7] [G]	CPVC	Xirtec CPVC One-Piece Ball Valves	ASTM F1970
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Certified valve sizes 1/2 - 2 in. [6] CPVC ball valves certified to ASTM F1970 and UP/IP code. Temperature and pressure rating of 100psi at 180°F and 400psi at 73°F. [7] Products are tested and certified for use with IPEX Xirtec CPVC piping system components. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

IPEX USA LLC
3 Place Du Commerce, Suite 101
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Madison, AL

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++	CPVC	IPEX, Blazemaster or TFP	ASTM F438
Caps Sch 40
3/4" - 1 1/4"
Couplings Sch 40
3/4" - 1 1/4"
Bushings Sch 40
1 x 3/4"	1 1/4" x 3/4"	1 1/4" x 1"
90° Elbow Sch 40
3/4" - 1 1/4"
45° Elbow Sch 40
3/4" - 1 1/4"
Reducing 90° Elbow
1" x 3/4"
Tee Sch 40
3/4" - 1 1/4"
Cross Sch 40
3/4" - 1 1/4"
Reducing Coupling Sch 40
1" x 3/4"
Reducing Tee Sch 40
3/4" x 3/4" x 1"	1" x 3/4" x 3/4"	1" x 3/4" x 1"	1" x 1" x 3/4"
1 1/4" x 1" x 3/4"	1 1/4" x 1" x 1"	1 1/4" x 1" x 1 1/4"	1 1/4" x 1 1/4" x 3/4"
1 1/4" x 1 1/4" x 1"
Reducing Cross Sch 40
1" x 1" x 3/4" x 3/4"
Grooved Adapter Sch 40
1 1/4"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	IPEX, Blazemaster or TFP	ASTM F439
Caps Sch 80
1 1/2" - 3"
Couplings Sch 80
1 1/2" - 3"
Bushings Sch 80
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1"
2 1/2" x 1 1/4"	2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"
3" x 2 1/2"
90° Elbow Sch 80
1 1/2" - 3"
45° Elbow Sch 80
1 1/2" - 3"
Tee Sch 80
1 1/2" - 3"
Cross Sch 80
1 1/2" - 3"
Grooved Adapter Sch 80
1 1/2" - 3"	2 1/2" x 76.1 mm
Reducing Tee Sch 80
1 1/4" x 1 1/4" x 1 1/2"	1 1/2" x 1 1/4" x 3/4"	1 1/2" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"
1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/4"	2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 1"	2 1/2" x 2 1/2" x 1 1/4"
2 1/2" x 2 1/2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2
3" x 3" x 2 1/2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	IPEX, Blazemaster or TFP	CSA B137.6
Caps Sch 40
3/4" - 1 1/4"
Couplings Sch 40
3/4" - 1 1/4"
Bushings Sch 40
1 x 3/4"	1 1/4" x 3/4"	1 1/4" x 1"
90° Elbow Sch 40
3/4" - 1 1/4"
45° Elbow Sch 40
3/4" - 1 1/4"
Reducing 90° Elbow
1" x 3/4"
Tee Sch 40
3/4" - 1 1/4"
Cross Sch 40
3/4" - 1 1/4"
Reducing Coupling Sch 40
1" x 3/4"
Reducing Tee Sch 40
3/4" x 3/4" x 1"	1" x 3/4" x 3/4"	1" x 3/4" x 1"	1" x 1" x 3/4"
1 1/4" x 1" x 3/4"	1 1/4" x 1" x 1"	1 1/4" x 1" x 1 1/4"	1 1/4" x 1 1/4" x 3/4"
1 1/4" x 1 1/4" x 1"
Reducing Cross Sch 40
1" x 1" x 3/4" x 3/4"
Grooved Adapter Sch 40
1 1/4"
Caps Sch 80
1 1/2" - 3"
Couplings Sch 80
1 1/2" - 3"
Bushings Sch 80
1 1/2" x 3/4"	1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	2 1/2" x 1"
2 1/2" x 1 1/4"	2 1/2" x 1 1/2"	2 1/2" x 2"	3" x 2"
3" x 2 1/2"
90° Elbow Sch 80
1 1/2" - 3"
45° Elbow Sch 80
1 1/2" - 3"
Tee Sch 80
1 1/2" - 3"
Cross Sch 80
1 1/2" - 3"
Grooved Adapter Sch 80
1 1/2" - 3"	2 1/2" x 76.1 mm
Reducing Tee Sch 80
1 1/4" x 1 1/4" x 1 1/2"	1 1/2" x 1 1/4" x 3/4"	1 1/2" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 3/4"
1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"	2" x 2" x 3/4"	2" x 2" x 1"
2" x 2" x 1 1/4"	2" x 2" x 1 1/2"	2 1/2" x 2 1/2" x 1"	2 1/2" x 2 1/2" x 1 1/4"
2 1/2" x 2 1/2" x 1 1/2"	2 1/2" x 2 1/2" x 2"	3" x 3" x 1 1/2"	3" x 3" x 2
3" x 3" x 2 1/2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe+++	CPVC 4120	IPEX or Blazemaster	ASTM F442
3/4" - 3" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe+++	CPVC 4120	IPEX or Blazemaster	CSA B137.6
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Facility : Pineville, NC

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Fittings~ [1] [2]	CPVC	System 636	CAN/ULC S102.2
45 Elbow H x H
2"	3"	4"	6"
8"	10"	12"
45 Elbow SP x H
4"
45 Wye H x H x H
6" x 6" x 4"	8" x 8" x 4"	10" x 10" x 4"	12" x 12" x 4"
45 Wye H x H x H x H
6" x 6" x 4"
90 Elbow SP x H
4"
90 Elbows HxH
2"	2" Long	3"	3" Long
4"	4" Long	6"	6" Long
8"	8" Long	10"	12"
Coupling H x SP
2"	3"	4"
Coupling SP x SP
2"	3"	4"
Couplings H x H
1 1/2"	2"	2 1/2"	3"
4"	6"	8"	10"
12"
End Caps
6"	8"	10"	12"
Female Adapter
2"
Plug MPT
1/2"
Reducer Bushing SP x Barb
1 1/2" x 1 1/2"
Reducer Bushing SP x FPT
2" x 1/2"
Reducer Bushings SP x H
1 1/2" x 1/2"	2" x 1/2"	2" x 3/4''	2" x 1 1/2"
3" x 2''	3" x 2'' Hex	3" x 2 1/2"	4" x 2"
6" x 4"	8" x 6"
Reducer Couplings H x H
3" x 2''	4" x 3"	4" x 6"
Tees H x H x 1/2" NPT
1 1/2"	2"	3"	4"
Tees H x H x H
2"	3"	3" x 2"	3" x 3" x 2"
4"	4" x 2"	4" x 4" x 2"	6"
6" x 6" x 4"	6" x 6" x 6"	8"	8" x 8" x 6"
Custom Assemblies
Bosch 6" x Metric Adapter	Bosch 8" x Metric Adapter	CPVC 3" Tee	CPVC 4" Tee
CPVC Reducer bushing 8" x 6"	Lochinvar – 2" Flue Connector	Lochinvar – 3" Flue Connector	Lochinvar - Appliance Adaptor 2", 3", 4"
Viessmann - 2" Adapter Coupling	Viessmann - 3" Adapter Coupling	Viessmann - 4" Adapter Coupling
~ Product is authorized to bear the cNSF Mark. [1] System 636 pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50
Pipe~ [1] [2]	CPVC	System 636	CAN/ULC S102.2
1 1/2"	2"	2 1/2"	3"
4"	6"	8"	10"
12"
~ Product is authorized to bear the cNSF Mark. [1] System 636 pipe and fittings are certified as a system to CAN/ULC S102.2. [2] Flame Spread Value (FSV) <=25 Smoke Developed Value (SDV) <=50

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [G]	CPVC 4120	IPEX	ASTM F442
1/2" - 6" SDR 11
4" SDR 26
4" SDR 32.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	Xirtec CPVC	ASTM F441
1/2" - 16" Sch 40
1/2" - 16" Sch 80¢
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ ### [G]	CPVC 4120	AquaRise	CSA B137.6
1 1/2" - 6" SDR 21
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ### Product tested for uses in 73°F with a rated pressure of 400 psi per ASTM F1970, and 180°F with a rated pressure of 100 psi per CSA B137.6. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G]	CPVC	Xirtec CPVC	ASTM F437
45º Ell, FPT x FPT
1/2" - 4"
90º Ell, FPT x FPT
1/2" - 4"
Cap, FPT
1/2" - 4"
Coupling, FPT x FPT
1/2" - 4"
Plug, MPT
1/2" - 4"
Reducing Bushing, MPT x FPT
3/4" x 1/2"	1" x 3/4"	1" x 1/2"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"
Tee, FPT x FPT x FPT
3/8"	1/4"	1/2" - 4"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G]	CPVC	IPEX (AquaRise)	ASTM F438
45° Elbow (S x S)
359164 1/2"	359165 3/4"	359166 1"
90° Elbow (S x S)
359194 1/2"	359195 3/4"	359196 1"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Caps (S)
359109 1/2"	359110 3/4"	359111 1"
Coupling (S x S)
359132 1/2"	359133 3/4"	359134 1"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (S x Sp)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"
Reducer Coupling (S x S)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"
Reducing Tee (S x S x S)
359514 3/4" x 1/2" x 1/2"	359513 3/4" x 1/2" x 3/4"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"
Tee (S x S x S)
359481 1/2"	359482 3/4"	359483 1"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G]	CPVC	IPEX (AquaRise)	ASTM F439
45° Elbow (S x S)
359167 1 1/4"	359168 1 1/2"	359169 2"	359170 2 1/2"
359171 3"	359172 4"	359173 6"
90° Elbow (S x S)
359197 1 1/4"	3591981 1/2"	359199 2"	359200 2 1/2"
359201 3"	359202 4"	359203 6"
Caps (S)
359112 1 1/4"	359113 1 1/2"	359114 2"	359115 2 1/2"
359116 3"	359107 4"	359108 6"
Coupling (S x S)
359135 1 1/4"	359136 1 1/2"	359137 2"	359138 2 1/2"
359139 3"	359140 4"	359141 6"
Reducer Bushing (S x Sp)
359384 1 1/2" x 1 1/4"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359392 2 1/2" x 2"
359393 3" x 1 1/2"	359394 3" x 2"	359395 3" x 2 1/2"	359428 4" x 1 1/4"
359429 4" x 1 1/2"	359396 4" x 2"	359430 4" x 2 1/2"	359397 4" x 3"
359398 6" x 2"	359399 6" x 3"	359400 6" x 4"
Reducer Coupling (S x S)
359466 1 1/2" x 1 1/4"	359458 2" x 1 1/2"	359470 3" x 2"	359459 4" x 2"
359472 4" x 3"
Reducing Tee (S x S x S)
359501 2" x 2" x 1 1/2"	359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"	359502 3" x 3" x 2"
359508 4" x 4" x 2"	359509 4" x 4" x 3"	359510 6" x 6" x 2"	359511 6" x 6" x 3"
359512 6" x 6" x 4"
Sweep Fitting (S x S)[1]
091834 1 1/2"	091835 2"	091836 2 1/2"
Tee (S x S x S)
359484 1 1/4"	359485 1 1/2"	359486 2"	359487 2 1/2"
359488 3"	359489 4"	359490 6"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	AquaRise	ASTM F442
1/2" - 6" SDR 11
1 1/2" - 6" SDR 21
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Flange x Socket
359228 1/2"	359229 3/4"	359230 1"	359231 1 1/4"
359232 1 1/2"	359233 2"	359234 2 1/2"	359235 3"
359236 4"	359238 6"
Union (S x S)
359520 1/2"	359521 3/4"	359522 1"	359523 1 1/4"
359524 1 1/2"	359525 2"	359051 3"	359550 4"
Van Stone Style Flange 150 lbs.
359266 1 1/2"	359267 2"	359268 3"
# Product tested for use in cold water (73°F) applications with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [3] [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Pipe Anchors, S x S
1 1/2" (359121)	2" (359122)	2 1/2" (359123)	3" (359124)
4" (359125)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [3] Product tested for use in 73°F with a rated pressure of 400 psi. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings## +++ [G]	CPVC	IPEX (AquaRise)	ASTM F1970
Flange x Socket
359040 2 1/2"	359041 3"	359043 4"	359042 6"
## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe¢ +++ [G]	CPVC 4120	AquaRise	CSA B137.6
1/2" - 6" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G]	CPVC	Xirtec CPVC	ASTM F439
45° Ell, S x S
059164 1/2"	059165 3/4"	059166 1"	059167 1 1/4"
059168 1 1/2"	059169 2"	059170 2 1/2"	059171 3"
059172 4"	059173 6"	059174 8"
90° Ell, S x FPT
1/2" - 2 1/2"
90° Ell, S x S
059194 1/2"	059195 3/4"	059196 1"	059197 1 1/4"
059198 1 1/2"	059199 2"	059200 2 1/2"	059201 3"
059202 4"	059203 6"	059204 8"
90° Street Elbow
059743 1/2"	059744 3/4"x90D	059745 1"
Cap, S
1/2" - 6"
Coupling, S x S
1/2"	059133 3/4"	1"	059136 1 1/2"
1 1/4"	059137 2"	2 1/2"	3"
059140 4"	059141 6"	059142 8"
Female Adapter, S x FPT
1/2" - 4"
Male Adapter, S x MPT
1/2" - 4"
Reducing Bushing, MPT x FPT
2" x 1/2"	2" x 3/4"
Reducing Bushing, Slip x FPT
059431 3/4" x 1/2"	059432 1" x 1/2"	059433 1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2" x 1/2"	2" x 3/4"
2" x 1"	2" x 1 1/4"	2" x 1 1/2"	3" x 2"
4" x 2"	4" x 3"
Reducing Bushing, Spigot x S
059375 3/4" x 1/2"	059376 1" x 1/2"	059377 1" x 3/4"	059378 1 1/4" x 1/2"
059379 1 1/4" x 3/4"	059380 1 1/4" x 1"	059381 1 1/2" x 1/2"	059382 1 1/2" x 3/4"
059383 1 1/2" x 1"	059384 1 1/2" x 1 1/4"	059385 2" x 1/2"	059386 2" x 3/4"
059387 2" x 1"	059388 2" x 1 1/4"	059389 2" x 1 1/2"	059736 2 1/2"x1/2"
059737 2 1/2"x3/4"	059738 2 1/2"x1"	059731 2 1/2"x1 1/4"	059732 2 1/2"x1 1/2"
059392 2 1/2" x 2"	3" x 1"	059733 3"x1 1/4"	059395 3" x 1 1/2"
059394 3" x 2"	059393 3" x 2 1/2"	059396 4" x 2"	4" x 2 1/2"
059397 4" x 3"	059399 6" x 3"	059400 6" x 4"	059401 8" x 6"
Reducing Coupling, S x S
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	059725 1 1/4"x1/2"
059726 1 1/4"x3/4"	1 1/4" x 1"	059727 1 1/2"x1/2"	059750 1 1/2"x3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	059728 2"x3/4"	2" x 1"
059729 2"x1 1/4"	2" x 1 1/2"	059730 2 1/2"x2"	3" x 2"
4" x 2"	4" x 3"	6" x 4"
Reducing Tee, S x S x S
3/4" x 3/4" x 1/2"	1" x 1" x 3/4"	1" x 1" x 1/2"	059717 1 1/2"x3/4"
1 1/2" x 1 1/2" x 1"	059751 2"x1/2"	059719 2"x3/4"	2" x 2" x 1"
2" x 2" x 1 1/2"	059734 2 1/2"x1/2"	059735 2 1/2"x3/4"	059752 2 1/2"x1"
059753 2 1/2"x1 1/4"	059722 2 1/2"x1 1/2"	059723 2 1/2"x2"	059724 3"x2 1/2"
3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"	6" x 6" x 3"
6" x 6" x 4"	8" x 8" x 6"
Sweep Fitting (S x S)[1]
091934 1 1/2"	091935 2"	091936 2 1/2"
Tee, S x S x FPT
1/2"	059518 1"
Tee, S x S x S
1/2"	3/4"	1"	1 1/4"
1 1/2"	059486 2"	2 1/2"	3"
4"	6"	8"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# +++ [G]	CPVC	Xirtec CPVC	ASTM F1970
45º Wye
3"	4"	6"	6" x 6" x 4"
Flange x Blind
1/2" - 8"
Flange x FPT
1/2" - 4"
Flange x Socket
1/2" - 2"	059234 2 1/2"	059235 3"	059236 4"
059238 6"	7" - 12"
Flange x Spigot
3" - 8"
HD Vanstone Flange
059711 1/2" CPVC	059712 3/4"	059713 1"	059714 1 1/14"
059715 2 1/2"
Union (FPT x FPT) Sch 80
1/2" - 3"
Union (S x S) Sch 80
1/2" - 3"
# Product tested for use in cold water (73°F) applications with a rated pressure of 150 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G]	CPVC	IPEX	ASTM F1970
Flange x Socket
059469 2 1/2"*	059477 3"*	059358 4"**	059359 6"**
* Product tested with metal ring kit for uses in 73°F with a rated pressure of 420 psi. ** Product tested with metal ring kit for uses in 73°F with a rated pressure of 320 psi. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G] ####	CPVC	Xirtec CPVC	ASTM F1970
Wyes Sch 80
1 1/2" (059553)	2" (059536)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. #### Product tested for use in cold water (73°F) applications with a rated pressure of 235 psi.
Fittings+++ [2] [G]	CPVC	Xirtec CPVC	ASTM F1970
Pipe Anchors, S x S
059924 1 1/2" [470 psi]	059925 2" [400 psi]	059926 2 1/2" [420 psi]	059927 3" [370 psi]
059928 4" [320 psi]
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [2] Product tested for uses in 73F as per the specific rated pressures per size. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings¢ +++ [G]	CPVC	IPEX (AquaRise)	CSA B137.6
45° Elbow (S x S)
359164 1/2"	359165 3/4"	359166 1"	359167 1 1/4"
359168 1 1/2"	359169 2"	359170 2 1/2"	359171 3"
359172 4"	359173 6"
90° Elbow (S x S)
359194 1/2"	359195 3/4"	359196 1"	359197 1 1/4"
359198 1 1/2"	359199 2"	359200 2 1/2"	359201 3"
359202 4"	359203 6"
90° Street Elbow (S x S)
359175 1/2"	359176 3/4"	359177 1"
Caps (S)
359109 1/2"	359110 3/4"	359111 1"	359112 1 1/4"
359113 1 1/2"	359114 2"	359115 2 1/2"	359116 3"
359107 4"	359108 6"
Coupling (S x S)
359132 1/2"	359133 3/4"	359134 1"	359135 1 1/4"
359136 1 1/2"	359137 2"	359138 2 1/2"	359139 3"
359140 4"	359141 6"
Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"
Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"
Reducer Bushing (S x Sp)
359375 3/4" x 1/2"	359376 1" x 1/2"	359377 1" x 3/4"	359382 1 1/2" x 3/4"
359384 1 1/2" x 1 1/4"	359388 2" x 1 1/4"	359389 2" x 1 1/2"	359392 2 1/2" x 2"
359393 3" x 1 1/2"	359394 3" x 2"	359395 3" x 2 1/2"	359428 4" x 1 1/4"
359429 4" x 1 1/2"	359396 4" x 2"	359430 4" x 2 1/2"	359397 4" x 3"
359398 6" x 2"	359399 6" x 3"	359400 6" x 4"
Reducer Coupling (S x S)
359460 3/4" x 1/2"	359461 1" x 1/2"	359462 1" x 3/4"	359466 1 1/2" x 1 1/4"
359458 2" x 1 1/2"	359470 3" x 2"	359459 4" X 2"	359472 4" X 3"
Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4"	359514 3/4" x 1/2" x 1/2"	359492 3/4" x 3/4" x 1/2"	359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"	359501 2" x 2" x 1 1/2"	359506 2 1/2" x 2 1/2" x 1 1/4"	359507 2 1/2" x 2 1/2" x 2"
359502 3" x 3" x 2"	359508 4" x 4" x 2"	359509 4" x 4" x 3"	359510 6" x 6" x 2"
359511 6" x 6" x 3"	359512 6" x 6" x 4"
Sweep Fitting (S x S)[1]
091834 1 1/2"	091835 2"	091836 2 1/2"
Tee (S x S x S)
359481 1/2"	359482 3/4"	359483 1"	359484 1 1/4"
359485 1 1/2"	359486 2"	359487 2 1/2"	359488 3"
359489 4"	359490 6"
[1] The Sweep fittings are certified individually but sold as part of a (non-certified) multicomponent "Compact Loop" product. The Compact Loop product is assembled from certified sweep fittings and certified pipe. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings¢ +++ [G]	CPVC	IPEX (AquaRise)	CSA B137.6
Flange x Socket
359040 2 1/2"	359041 3"	359043 4"	359042 6"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC	IPEX	ASTM D2846
1/4"-2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC	Silver-Line	ASTM D2846
1/4"-2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC	Ultra-Pure® CPVC	ASTM D2846
1/4"-2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

@ Maximum number of transition fittings per residence not to exceed 30.
^ Product can also use the trade Name "IPEX".
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

IPS Adhesives (Jiaxing) Co. Ltd.
Pinghu Economic Development Zone
2008 XinQun Road Zhejiang, 314200
China
86 573 8507 1288

Facility : Zhejiang, China

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement& ++ [1] [2]	CPVC	PW, DWV, SW	Weld-All™ 7129[X] CPVC Orange Medium Body-Low VOC	ASTM D2846
Solvent Cement& ++ [1] [2]	CPVC	PW, DWV, SW	Weld-All™ 7129[X] CPVC Orange Medium Body-Low VOC	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Weld-On® 714 Gray Low VOC CPVC	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Weld-On® 714 Orange Low VOC CPVC	ASTM F493
Solvent Cement+++ [1] [2]	CPVC	PW, DWV, SW	Weld-On® 724 Gray CPVC Low-VOC	ASTM F493
& x indicates size of container 04 - 1/4 pint 08 - 1/2 pint 16 - 1 pint 32 - 1 quart 01 - 1 gallon + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for use with Weld-On® P-68 Clear Low-VOC Primer for PVC/CPVC, Weld-On® P-70 Clear Low-VOC CPVC/PVC Primer, or Weld-On® P-70 Purple Low-VOC CPVC/PVC Primer. [2] This product is acceptable for use with pipe and fittings sized 1/2” and greater diameter.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

IPS Corporation
17109 South Main
P.O. Box 379
Gardena, CA 90248
United States
310-898-3351
Visit this company's website

Facility : # 1 Netherlands

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Low-VOC CPVC	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Ultra Low VOC CPVC	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Ultra-Low VOC CPVC	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Christy's Orange Medium Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 217 Low VOC Gray Heavy Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 217xx CPVC Cement Gray	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 217xx LOW VOC Heavy Body CPVC Gray	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 786 Low VOC Orange Heavy Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 786 for CPVC	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 786xx Heavy Bodied Orange for CPVC	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 786xx Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Thermoguard MPF 914 Low VOC Orange Heavy Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Weld-On 724 Orange/Gray Heavy Bodied Ultra Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Low-VOC CPVC	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Ultra Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Ultra-Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Christy's Orange Medium Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 217 Low VOC Gray Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 217xx CPVC Cement Gray	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 217xx LOW VOC Heavy Body CPVC Gray	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 786 Low VOC Orange Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 786 for CPVC	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 786xx Heavy Bodied Orange for CPVC	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	E-Z Weld 786xx Low VOC CPVC Cement	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Weld-On 724 Orange/Gray Heavy Bodied Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement§ +++ [2]	CPVC	PW, DWV, SW	Thermoguard MPF 914 Low VOC Orange Heavy Body CPVC Cement	ASTM F493
Solvent Cement+++ [4]	CPVC	PW, DWV, SW	Weld-On 724 CPVC Gray Low VOC	ASTM F493
Solvent Cement+++ [4]	CPVC	PW, DWV, SW	Weld-On 724 Gray CPVC	ASTM F493
Solvent Cement+++ [4]	CPVC	PW, DWV, SW	Weld-On 724 Gray CPVC	ASTM D2846
Solvent Cement+++ [4]	CPVC	PW, DWV, SW	Weld-On 724 Orange CPVC	ASTM F493
Solvent Cement+++ [4]	CPVC	PW, DWV, SW	Weld-On 724 Orange CPVC	ASTM D2846
Solvent Cement+++ [3] [4] [G]	CPVC	PW, DWV, SW	E-Z Weld Enviro 227 One-Step Flowguard Gold Medium Body CPVC Cement	ASTM F493
Solvent Cement+++ [3] [4] [G]	CPVC	PW, DWV, SW	E-Z Weld 227 Flowguard Gold Medium Body Yellow CPVC Cement	ASTM F493
Solvent Cement+++ [3] [4] [G]	CPVC	PW, DWV, SW	Flotek One-Step CPVC Cement Medium Body Yellow	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI Standard 61 is evaluated based on pipe and fittings assembled using the cement without a primer. [2] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and any IPS Primer. [3] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings assembled using the cement with primer. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Gardena, CA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2] [G]	CPVC	CW	Chemdrain CPVC Cement	ASTM F2618
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Christy's Heavy Body Orange/Gray/Yellow CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Christy's Heavy Body Orange/Gray/Yellow CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Christy's Medium Body Orange/Gray/Yellow CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Christy's Medium Body Orange/Gray/Yellow CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Christy's Orange Medium Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Christy's Orange Medium Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	Christy's Orange Medium Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 217 Low VOC Gray Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 217 Low VOC Gray Heavy Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 217xx CPVC Cement Gray	ASTM F493
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 217xx CPVC Cement Gray	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 217xx LOW VOC Heavy Body CPVC Gray	ASTM F493
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 217xx LOW VOC Heavy Body CPVC Gray	ASTM D2846
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	E-Z Weld 230 Industrial Grade Chemical Resistant Gray Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	E-Z Weld 230 Industrial Grade Chemical Resistant Gray Heavy Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 786 Low VOC Orange Heavy Body CPVC Cement	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 786 Low VOC Orange Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 786 for CPVC	ASTM F493
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 786 for CPVC	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 786xx Heavy Bodied Orange for CPVC	ASTM F493
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 786xx Heavy Bodied Orange for CPVC	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 786xx Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	E-Z Weld 786xx Low VOC CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Gray Heavy Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Gray Heavy Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Green Medium Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Green Medium Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Orange Heavy Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Orange Heavy Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Orange Medium Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Orange Medium Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Orange Regular Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Orange Regular Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Red/Tan/Yellow/Beige Heavy Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Red/Tan/Yellow/Beige Heavy Bodied CPVC Cement	ASTM F493
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Yellow Heavy Bodied CPVC Cement	CSA B137.6
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Yellow Medium Bodied CPVC Cement	CSA B137.6
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Yellow Medium Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	NextGen Yellow Medium Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	Thermoguard MPF 914 Low VOC Orange Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [8] [G]	CPVC	PW, DWV, SW	Thermoguard MPF 914 Low VOC Orange Heavy Body CPVC Cement	ASTM D2846
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED	ASTM F493
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED	ASTM D2846
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED	ASTM D2846
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 2714 Beige Low-VOC CPVC	ASTM F493
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 2714 Gray Low-VOC CPVC	ASTM F493
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 2714 Orange Low-VOC CPVC	ASTM F493
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 2714 Red or Tan Low-VOC CPVC	ASTM F493
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 2714 Yellow Low-VOC CPVC	ASTM F493
Solvent Cement¢ *** +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 2714 Yellow Low-VOC CPVC	CSA B137.6
Solvent Cement! § +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 3556 CPVC Cement Yellow Low VOC	ASTM F493
Solvent Cement¢ *** +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 3556 CPVC Cement Yellow Low VOC	CSA B137.6
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Orange Low-VOC	ASTM F493
Solvent Cement¢ *** +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Low-VOC CPVC	CSA B137.6
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Low-VOC CPVC	ASTM F493
Solvent Cement¢ § +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Ultra Low VOC CPVC	CSA B137.6
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Ultra-Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Ultra-Low VOC CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS ECO Yellow Medium Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS ECO Yellow Medium Bodied CPVC	ASTM F493
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS ECO Yellow Medium Bodied CPVC	CSA B137.6
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Low VOC CPVC Cement	ASTM F493
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Ultra Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Ultra Low VOC Yellow Medium Bodied CPVC	ASTM F493
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Ultra Low VOC Yellow Medium Bodied CPVC	CSA B137.6
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Ultra Low VOC Yellow Medium Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 550 ECO Fire Sprinkler Red/Tan Heavy Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 550 ECO Fire Sprinkler Red/Tan Heavy Bodied CPVC	ASTM F493
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 550 Fire Sprinkler Low VOC One- Step CPVC Cement Red	ASTM D2846
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 550 Fire Sprinkler Low VOC One- Step CPVC Red Cement	ASTM D2846
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 550 Fire Sprinkler Low VOC One-Step CPVC Cement Red	ASTM F493
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 550 Fire Sprinkler Low VOC One-Step CPVC Cement – Tan	ASTM F493
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 550 Fire Sprinkler Low VOC One-Step CPVC Red Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 713 ECO Orange Regular Bodied CPVC	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 713 ECO Orange Regular Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 714 ECO Orange/Red/Gray/Yellow/Tan/Beige Heavy Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 714 ECO Orange/Red/Gray/Yellow/Tan/Beige Heavy Bodied CPVC	ASTM F493
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On 714 ECO Yellow Heavy Bodied CPVC	CSA B137.6
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 714 Gray Low-VOC CPVC	ASTM F493
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 714 Gray Low-VOC CPVC	ASTM D2846
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange Low-VOC CPVC	ASTM F493
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange Low-VOC CPVC	ASTM D2846
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Low-VOC CPVC	ASTM D2846
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Low-VOC CPVC	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Ultra Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Ultra Low VOC CPVC	ASTM D2846
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 716 Heavy Bodied Orange/Gray/Yellow CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On 716 Heavy Bodied Orange/Gray/Yellow CPVC Cement	ASTM D2846
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 724 CPVC Gray Low-VOC	ASTM F493
Solvent Cement+++ [1] [2] [G]	CPVC	CW	Weld-On 724 Chemical Resistant CPVC Cement	ASTM F2618
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 724 Gray or Orange CPVC	ASTM F493
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 724 Gray or Orange CPVC	ASTM D2846
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 724 Mustard Yellow CPVC	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, SW, DWV	Weld-On 724 Orange/Gray/Yellow Heavy Bodied Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [8] [G]	CPVC	PW, SW, DWV	Weld-On 724 Orange/Gray/Yellow Heavy Bodied Ultra Low VOC CPVC Cement	ASTM D2564
Solvent Cement+++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-On 724 Yellow CPVC	ASTM F493
Solvent Cement¢ § +++ [2] [8] [G]	CPVC	PW, SW, DWV	Weld-On 724 Yellow Heavy Bodied Ultra Low VOC CPVC Cement	CSA B137.6
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On BlazeMaster ECO Red Heavy Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On BlazeMaster ECO Red Heavy Bodied CPVC	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Cresco CTS ECO Orange Medium Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Cresco CTS ECO Orange Medium Bodied CPVC	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard 714 ECO Orange Heavy Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard 714 ECO Orange Heavy Bodied CPVC	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Glow ECO Yellow Medium Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Glow ECO Yellow Medium Bodied CPVC	ASTM F493
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Glow ECO Yellow Medium Bodied CPVC	CSA B137.6
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Gold ECO Yellow Medium Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Gold ECO Yellow Medium Bodied CPVC	ASTM F493
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Gold ECO Yellow Medium Bodied CPVC	CSA B137.6
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Green ECO Medium Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Green ECO Medium Bodied CPVC	ASTM F493
Solvent Cement¢ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On FlowGuard Gold Ultra Low VOC CPVC Cement	CSA B137.6
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Glow Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Glow Low VOC CPVC Cement	ASTM F493
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Glow Ultra Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Glow Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Gold Low VOC CPVC Cement	ASTM F493
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Gold Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Gold Ultra Low VOC CPVC Cement	ASTM D2846
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Gold Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Green Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement§ *** [2] [8] [G]	CPVC	PW, DWV, SW	Weld-On Flowguard Green Ultra Low VOC CPVC Cement	ASTM D2846
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	Weld-On® Blazemaster®	ASTM D2846
Solvent Cement+++ [2] [G]	CPVC	PW, DWV, SW	Weld-On® Blazemaster®	ASTM F493
! Product is Certified whether or not it bears the U.P. Code Mark. * Cements Certified to CSA B181.1 must be yellow in color. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Cements Certified to CSA B181.2, CSA B137.3 must be gray in color. * Cements Certified to CSA B137.6 must be clear or yellow oxide in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld-On® P-68 Clear Low-VOC Primer for PVC/CPVC, Weld-On® P-70 Clear Low-VOC CPVC/PVC Primer, or Weld-On® P-70 Purple Low-VOC CPVC/PVC Primer. [4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Weld-All™ 8151[X] Clear Primer. [5] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings assembled using the cement without a primer. [7] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and P-75 Aqua-Blue Low VOC primer. [8] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld-On P-68 or P-70 Clear or Purple primers. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

IPS Corporation
455 West Victoria Street
Compton, CA 90220
United States
310-898-3300
Visit this company's website

Facility : Hartsville, TN

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Gray Heavy Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Gray Heavy Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Green Medium Bodied CPVC Cement	ASTM D2846
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Green Medium Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Orange Heavy Bodied CPVC Cement	ASTM D2846
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Orange Heavy Bodied CPVC Cement	ASTM F493
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Orange Medium Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Orange Medium Bodied CPVC Cement	ASTM D2846
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Orange Regular Bodied CPVC Cement	ASTM D2846
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Orange Regular Bodied CPVC Cement	ASTM F493
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Red/Tan/Yellow/Beige Heavy Bodied CPVC Cement	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Red/Tan/Yellow/Beige Heavy Bodied CPVC Cement	ASTM D2846
Solvent Cement ¢ § +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Yellow Heavy Bodied CPVC Cement	CSA B137.6
Solvent Cement ¢ § +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Yellow Medium Bodied CPVC Cement	CSA B137.6
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	NextGen Yellow Medium Bodied CPVC Cement	ASTM D2846
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	NextGen Yellow Medium Bodied CPVC Cement	ASTM F493
Solvent Cement+++ [2] [6]	CPVC	PW, DWV, SW	Weld-On 2714 Beige Low- VOC CPVC	ASTM F493
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On 2714 Red/Tan Low VOC CPVC	ASTM F493
Solvent Cement ¢ +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On 3556 Yellow Low VOC CPVC	CSA B137.6
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On 3556 Yellow Low VOC CPVC	ASTM F493
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS ECO Yellow Medium Bodied CPVC	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS ECO Yellow Medium Bodied CPVC	ASTM D2846
Solvent Cement+ ¢ § [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS ECO Yellow Medium Bodied CPVC	CSA B137.6
Solvent Cement+ ¢ § [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Ultra Low VOC Yellow Medium Bodied CPVC	CSA B137.6
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Ultra Low VOC Yellow Medium Bodied CPVC	ASTM D2846
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Ultra Low VOC Yellow Medium Bodied CPVC	ASTM F493
Solvent Cement§ +++ [4] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Yellow Low VOC CPVC	ASTM D2846
Solvent Cement§ +++ [4] [G]	CPVC	PW, DWV, SW	Weld-On 500 CTS Yellow Low VOC CPVC	ASTM F493
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 550 ECO Fire Sprinkler Red/Tan Heavy Bodied CPVC	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 550 ECO Fire Sprinkler Red/Tan Heavy Bodied CPVC	ASTM D2846
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On 550 Red Fire Sprinkler One-Step Low VOC CPVC	ASTM D2846
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On 550 Tan Fire Sprinkler One-Step Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 713 ECO Orange Regular Bodied CPVC	ASTM D2846
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 713 ECO Orange Regular Bodied CPVC	ASTM F493
Solvent Cement § +++ [1]	CPVC	PW, DWV, SW	Weld-On 713 Orange Low VOC CPVC	ASTM D2846
Solvent Cement § +++ [1]	CPVC	PW, DWV, SW	Weld-On 713 Orange Low VOC CPVC	ASTM F493
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 714 ECO Orange/Red/Gray/Yellow/Tan/Beige Heavy Bodied CPVC	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 714 ECO Orange/Red/Gray/Yellow/Tan/Beige Heavy Bodied CPVC	ASTM D2846
Solvent Cement+ ¢ § [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On 714 ECO Yellow Heavy Bodied CPVC	CSA B137.6
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On 714 Gray/Orange Low VOC CPVC	ASTM D2846
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On 714 Gray/Orange Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [4] [G]	CPVC	PW, DWV, SW	Weld-On 724 Orange/Gray Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [4] [G]	CPVC	PW, DWV, SW	Weld-On 724 Orange/Gray Low VOC CPVC	ASTM D2846
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On BlazeMaster ECO Red Heavy Bodied CPVC	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On BlazeMaster ECO Red Heavy Bodied CPVC	ASTM D2846
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On BlazeMaster Fire Sprinkler Red Low VOC CPVC	ASTM D2846
Solvent Cement +++ [1] [3]	CPVC	PW, DWV, SW	Weld-On BlazeMaster Fire Sprinkler Red Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Cresco CTS ECO Orange Medium Bodied CPVC	ASTM D2846
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Cresco CTS ECO Orange Medium Bodied CPVC	ASTM F493
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard 714 ECO Orange Heavy Bodied CPVC	ASTM F493
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard 714 ECO Orange Heavy Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Glow ECO Yellow Medium Bodied CPVC	ASTM D2846
Solvent Cement ¢ § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Glow ECO Yellow Medium Bodied CPVC	CSA B137.6
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Glow ECO Yellow Medium Bodied CPVC	ASTM F493
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Gold ECO Yellow Medium Bodied CPVC	ASTM F493
Solvent Cement ¢ § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Gold ECO Yellow Medium Bodied CPVC	CSA B137.6
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Gold ECO Yellow Medium Bodied CPVC	ASTM D2846
Solvent Cement§ +++ [4] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Gold Yellow Low VOC CPVC	ASTM F493
Solvent Cement§ +++ [4] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Gold Yellow Low VOC CPVC	ASTM D2846
Solvent Cement§ +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Green ECO Medium Bodied CPVC	ASTM D2846
Solvent Cement § +++ [1] [6] [G]	CPVC	PW, DWV, SW	Weld-On Flow Guard Green ECO Medium Bodied CPVC	ASTM F493
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Glow Low VOC CPVC Cement	ASTM F493
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Glow Low VOC CPVC Cement	ASTM D2846
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Glow Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Glow Ultra Low VOC CPVC Cement	ASTM D2846
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Gold Low VOC CPVC Cement	ASTM D2846
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Gold Low VOC CPVC Cement	ASTM F493
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Gold Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Gold Ultra Low VOC CPVC Cement	ASTM D2846
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Green Ultra Low VOC CPVC Cement	ASTM D2846
Solvent Cement+++ [7]	CPVC	PW, DWV, SW	Weld-On Flowguard Green Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement+++ [7] [G]	CPVC	PW, DWV, SW	Weld-On 550 Fire Sprinkler Low VOC One-Step CPVC Red Cement	ASTM D2846
Solvent Cement+++ [7] [G]	CPVC	PW, DWV, SW	Weld-On 550 Fire Sprinkler Low VOC One-Step CPVC Red Cement	ASTM F493
Solvent Cement+++ [7] [G]	CPVC	PW, DWV, SW	Weld-On 724 CPVC Gray Low VOC	ASTM F493
Solvent Cement+++ [7] [G]	CPVC	PW, DWV, SW	Weld-On 724 Gray CPVC	ASTM D2846
Solvent Cement+++ [7] [G]	CPVC	PW, DWV, SW	Weld-On 724 Gray CPVC	ASTM F493
Solvent Cement+++ [7] [G]	CPVC	PW, DWV, SW	Weld-On 724 Orange CPVC	ASTM F493
Solvent Cement+++ [7] [G]	CPVC	PW, DWV, SW	Weld-On 724 Orange CPVC	ASTM D2846
! Product is Certified whether or not it bears the U.P. Code Mark + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers. [3] This product is intended for use without a primer. [4] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assemblies using the cement and one of the following primers: Christy's® Clear Primer Low VOC, Christy's® Purple Primer Low VOC, Christy's® Red Hot Clear® Low VOC, or Christy's® Red Hot Purple Primer Low VOC. [5] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers. [6] The compliance of this product with the health effects requriements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings. [7] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and Weld-On P-70 Clear or Purple primers. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Jomar International
7243 Miller Drive
Warren, MI 48092
United States
586-268-1220
Visit this company's website

Facility : Kaohsiung, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Valves# +++ [G]	CPVC	S-605	ASTM F1970
CPVC CTS Ball Valve
1/" - 2"
# CPVC CTS Ball Valves rated at 100 PSI and 180°F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Kaneka North America LLC
6161 Underwood Road
Pasadena, TX 77507
United States
800-526-3223
281-474-1841
Visit this company's website

Facility : # 2 USA

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC# +++	1	KNK-5003	ASTM D1784 24448
CPVC# ¢ +++	1	KNK-5003	CSA B137.6 24448
CPVC# +++	1	KNK-5005	ASTM D1784 23447
CPVC# ¢ +++	1	KNK-5005	CSA B137.6 23447
CPVC 4120# +++	2	KNK-6001	ASTM D1784 23447
CPVC 4120# ¢ +++	2	KNK-6001	CSA B137.6 23447
CPVC 4120# ¢ +++	2	KNK-6006	ASTM D1784 23447
CPVC 4120# ¢ +++	2	KNK-6006	CSA B137.6 23447
# Trade designation may or may not be followed by a three digit color number and alpha packaging code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Facility : Pulaski, TN

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC# +++	1	KNK-5003	ASTM D1784 24448
CPVC# ¢ +++	1	KNK-5003	CSA B137.6 24448
CPVC# +++	1	KNK-5005	ASTM D1784 23447
CPVC# ¢ +++	1	KNK-5005	CSA B137.6 23447
# Trade designation may or may not be followed by a three digit color number and alpha packaging code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Facility : Cartegena, Bolívar, Colombia

Potable Water - Materials

Material Type

End Use

Trade Name

Product Standard

CPVC# +++

KNK-5003

ASTM D1784 24448

# Trade designation may or may not be followed by a three digit color number and alpha 
  packaging code.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

KEM ONE
19 Rue Jacqueline Auriol
69008 Lyon
France
33 4 69 67 72 00
Visit this company's website

Facility : Reims, France

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC 4120+++	1	Lucalor PEY 795 G 343[1]	ASTM D1784 23447
CPVC 4120+++	1	Lucalor PEY 795 Y 220[1]	ASTM D1784 23447
CPVC 4120+++	1	Lucalor PEY 795A G 343[1]	ASTM D1784 23447
CPVC 4120+++	1	Lucalor PEY 795A Y 220[1]	ASTM D1784 23447
CPVC 4120+++	1	Lucalor® PEY 792Y220	ASTM D1784 23447
CPVC 4120+++	2	Lucalor® RY 783G343	ASTM D1784 23447
CPVC 4120+++	2	Lucalor® RY 783Y220	ASTM D1784 23447
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for a maximum surface area to volume ratio of 395 in²/L

Kemflo Canada Inc.
500 Edward Avenue
Unit 2
Richmond Hill, ON L4C 9W6
Canada
905-832-1217

Facility : Richmond Hill, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings (PW)# ++	CPVC	CHEMKOR	ASTM F1970
Socket Flange
1/2" thru 6"
Blind Flange
3"	4"	6"
Vanstone Flange
1 1/2" thru 6"
# Product tested for use in 73°F with a rated pressure of 150 psi. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Kota Tapes (India) Pvt. Ltd.
303 Atlantis K-10, Opp Swagat, Petrol
Pump, Vikram Sarabhai Marg, Vadiwadi
Vadodra, Gujarat 390023
India
91 265 2355796
Visit this company's website

Facility : Gujarat, India

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	SEAL TITE CPVC Low VOC Medium Bodied	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	PIPE WELD CPVC Low VOC Medium Bodied	ASTM D2846
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	PIPE WELD CPVC Low VOC Medium Bodied	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	SEAL TITE CPVC Low VOC Medium Bodied	ASTM D2846
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement without a primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diamter. [3] This is a one-step solvent cement and is not intended for use with a primer.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

LD Valve Co., Ltd.
No. 388 Tzuchiang Road
Wuchi, Taichung
43547
Taiwan
886 4 2639 6399
Visit this company's website

Facility : Taichung City, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++	CPVC	LD VALVE	ASTM F441
1/2" - 12" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Lubrizol Advanced Materials, Inc.
9911 Brecksville Road
Cleveland, OH 44141-3201
United States
888-234-2436
216-447-5000
Visit this company's website

Facility : Louisville, KY

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC 4120-06+++	1	BlazeMaster® 3138 Orange 734 G	ASTM D1784 23547
CPVC 4120-06+++	1	BlazeMaster® 3138 Orange 734 M	ASTM D1784 23547
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 M	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 O	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 M	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 O	ASTM D1784 24447
CPVC 4120-06+++	1	BlazeMaster® 88738 Orange 734 G	ASTM D1784 23547
CPVC 4120-06+++	1	BlazeMaster® 88738 Orange 734 M	ASTM D1784 23547
CPVC+++	2	Corazan® 3236 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	Corzan ® 3140 HP Gray 211	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3118 Gray 211	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3118 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3120 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3120 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	Corzan® 3122 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3130 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3130 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	Corzan® 3140 HP Gray 245	ASTM D1784 24448
CPVC+++	2	Corzan® 3142 Gray 245	ASTM D1784 23437
CPVC 4120-06+++	1	Corzan® 3160 Gray 211	ASTM D1784 24448
CPVC 4120-06+++	1	Corzan® 3160 Gray 245	ASTM D1784 24448
CPVC 4120-06+++	1	Corzan® 3175 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	2	Corzan® 3212 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	2	Corzan® 3212 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	Corzan® 3212 Gray 246	ASTM D1784 23447
CPVC 4120+++	4	Corzan® 3216 Gray 245	ASTM D1784 24446
CPVC+++	2	Corzan® 3236 Gray 211	ASTM D1784 23447
CPVC+++	2	Corzan® 3244 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 88632 GRAY 246	ASTM D1784 23448
CPVC 4120-06+++		FlowGuard 3165 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	FlowGuard Gold 3107 Blue 470	ASTM D1784 24448
CPVC 4120-05+++	1	FlowGuard Gold® 3107 Tan 309	ASTM D1784 24448
CPVC 4120-06+++	1	FlowGuard Gold® 3115HP Tan 309	ASTM D1784 24448
CPVC 4120-05+++	2	FlowGuard Gold® 3215 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 3249 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 3253 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 88027 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	FlowGuard Gold® 9115 HP Tan 309	ASTM D1784 24448
CPVC 4120-06+++	1	FlowGuard Gold® 9115 Tan 309	ASTM D1784 24448
CPVC+++	2	FlowGuard Gold® 9253 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	FlowGuard® 3137-Gray 245	ASTM D1784 23447
CPVC+++	2	FlowGuard® 3217 Blue 480	ASTM D1784 23447
CPVC 4120-06+++	1	FlowGuard® 9115 Blue 480	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3107 Blue 470	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3107 Tan 309	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 3115 Tan 309	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3118 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3120 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 3140 Gray 245	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 3160 Gray 211	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 3160 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	2	TempRite® 3215 Blue 470	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 3215 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 3217 Blue 480	ASTM D1784 23447
CPVC 4120+++	4	TempRite® 3230 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 3238 Orange 734 O	ASTM D1784 24447
CPVC+++	2	TempRite® 3249 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 3253 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 3253 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 3253 Tan 311	ASTM D1784 23447
CPVC+++	2	TempRite® 3253 Tan 312	ASTM D1784 23447
CPVC+++	2	TempRite® 88031 Gray 211	ASTM D1784 23447
CPVC+++	2	TempRite® 88031 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 88065 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	TempRite® 88065 Orange 734 O	ASTM D1784 24447
CPVC+++	2	TempRite® 88096 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 88098 Brown 394	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Tan 311	ASTM D1784 23447
CPVC+++	2	TempRite® 88236 Gray 211	ASTM D1784 23447
CPVC+++	2	TempRite® 88236 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 88244 Black 294	ASTM D1784 23447
CPVC+++	2	TempRite® 88244 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88601 Tan 309	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88611 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88616 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88616 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88619 Gray 245	ASTM D1784 23448
CPVC 4120-06+++	1	TempRite® 88619 Tan 309	ASTM D1784 23448
CPVC 4120-05+++	1	TempRite® 88628 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Tan 309	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Tan 309A	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88631 Gray 246	ASTM D1784 23448
CPVC 4120-06+++	1	TempRite® 88631 Tan 311	ASTM D1784 23448
CPVC 4120-06+++	1	TempRite® 88632 Gray 246	ASTM D1784 23448
CPVC 4120-06+++	1	TempRite® 88632 Tan 311	ASTM D1784 23448
CPVC 4120+++	4	TempRite® 88641 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88642 Tan 309	ASTM D1784 23547
CPVC 4120-06+++	1	TempRite® 88653 Orange 700	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 88653 Orange 734	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 88659 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88662 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 88708 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 213	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 215	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88738 Orange 734	ASTM D1784 23547
CPVC 4120-06+++	1	TempRite® 88738 Orange 734 G	ASTM D1784 23547
CPVC 4120-06+++	1	TempRite® 89307 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 9115 Blue 480	ASTM D1784 24448
CPVC+++	2	TempRite® 9253 Tan 309	ASTM D1784 23447
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

$ This material is authorized for use in reclaimed water.
NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.  Trade Name colors that may appear the following way are also considered to be
      NSF Certified: BLACK or BLK; ORANGE or ORG; BLUE or BLU; GRAY or GRY; BROWN or BRN.

Facility : Oevel, Belgium

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC 4120-06+++	1	BlazeMaster® 3138 Orange 734 G	ASTM D1784 23547
CPVC 4120-06+++	1	BlazeMaster® 3138 Orange 734M	ASTM D1784 23547
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 M	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 O	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 M	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 O	ASTM D1784 24447
CPVC 4120-06+++	1	BlazeMaster® 88738 Orange 734 G	ASTM D1784 23547
CPVC 4120-06+++	1	BlazeMaster® 88738 Orange 734M	ASTM D1784 23447
CPVC+++	2	Corazan® 3236 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	Corzan ® 3140 HP Gray 211	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3104 Gray 247	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3118 Gray 211	ASTM D1784 24448
CPVC+++	2	Corzan® 3118 Gray 215	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3118 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3120 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3120 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3122 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3130 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3130 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	Corzan® 3140 Gray 245	ASTM D1784 24448
CPVC 4120-06+++	1	Corzan® 3140 HP Gray 245	ASTM D1784 24448
CPVC+++	2	Corzan® 3142 Gray 245	ASTM D1784 23437
CPVC 4120-06+++	1	Corzan® 3160 Gray 211	ASTM D1784 24448
CPVC 4120-06+++	1	Corzan® 3160 Gray 245	ASTM D1784 24448
CPVC+++	1	Corzan® 3175 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	2	Corzan® 3212 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	2	Corzan® 3212 Gray 245	ASTM D1784 23477
CPVC 4120-05+++	2	Corzan® 3212 Gray 246	ASTM D1784 23447
CPVC 4120+++	4	Corzan® 3216 Gray 245	ASTM D1784 24446
CPVC+++	2	Corzan® 3236 Gray 211	ASTM D1784 23447
CPVC+++	2	Corzan® 3244 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	FlowGuard 3165 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	FlowGuard Gold 3107 Blue 470	ASTM D1784 24448
CPVC 4120-05+++	1	FlowGuard Gold® 3107 Tan 309	ASTM D1784 24448
CPVC 4120-06+++	1	FlowGuard Gold® 3115HP Tan 309	ASTM D1784 24448
CPVC 4120-05+++	2	FlowGuard Gold® 3215 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 3249 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 3253 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 88027 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	FlowGuard Gold® 9115 HP Tan 309	ASTM D1784 24448
CPVC 4120-06+++	1	FlowGuard Gold® 9115 Tan 309	ASTM D1784 24448
CPVC+++	2	FlowGuard Gold® 9253 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	FlowGuard® 3137-Gray 245	ASTM D1784 23447
CPVC+++	2	FlowGuard® 3217 Blue 480	ASTM D1784 23447
CPVC 4120-06+++	1	FlowGuard® 9115 Blue 480	ASTM D1784 24448
CPVC+++	2	TempRite® 3253 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 3107 Blue 470	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3107 Tan 309	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 3115 Tan 309	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3118 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3120 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 3140 Gray 245	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 3160 Gray 211	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 3160 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	2	TempRite® 3215 Blue 470	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 3215 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 3217 Blue 480	ASTM D1784 23447
CPVC 4120+++	4	TempRite® 3230 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 3238 Orange 734 O	ASTM D1784 24447
CPVC+++	2	TempRite® 3249 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 3253 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 88031 Gray 211	ASTM D1784 23447
CPVC+++	2	TempRite® 88031 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 88065 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	TempRite® 88065 Orange 734 O	ASTM D1784 24447
CPVC+++	2	TempRite® 88096 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 88098 Brown 394	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Tan 311	ASTM D1784 23447
CPVC+++	2	TempRite® 88236 Gray 211	ASTM D1784 23447
CPVC+++	2	TempRite® 88236 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 88244 Black 294	ASTM D1784 23447
CPVC+++	2	TempRite® 88244 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88601 Tan 309	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88611 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88616 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88616 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88619 Gray 245	ASTM D1784 23448
CPVC 4120-06+++	1	TempRite® 88619 Tan 309	ASTM D1784 23448
CPVC 4120-05+++	1	TempRite® 88628 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Tan 309	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Tan 309A	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88631 Gray 246	ASTM D1784 23448
CPVC 4120-06+++	1	TempRite® 88631 Tan 311	ASTM D1784 23448
CPVC 4120-06+++	1	TempRite® 88632 Gray 246	ASTM D1784 23448
CPVC 4120-06+++	1	TempRite® 88632 Tan 311	ASTM D1784 23448
CPVC 4120+++	4	TempRite® 88641 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88642 Tan 309	ASTM D1784
CPVC 4120-06+++	1	TempRite® 88653 Orange 700	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 88653 Orange 734	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 88659 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88662 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 88708 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 213	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 215	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88712 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88738 Orange 734	ASTM D1784 23547
CPVC 4120-06+++	1	TempRite® 88738 Orange 734 G	ASTM D1784 23547
CPVC 4120-06+++	1	TempRite® 89307 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 9115 Blue 480	ASTM D1784 24448
CPVC+++	2	TempRite® 9253 Tan 309	ASTM D1784 23447
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

$ This material is authorized for use in reclaimed water.
NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.  Trade Name colors that may appear the following way are also considered to be
      NSF Certified: BLACK or BLK; ORANGE or ORG; BLUE or BLU; GRAY or GRY; BROWN or BRN.

Facility : Gujarat, India

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC 4120-06+++	1	BlazeMaster® 3138 Orange 734 G	ASTM D1784 23547
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 M	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 3238 Orange 734 O	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 M	ASTM D1784 24447
CPVC 4120-05+++	2	BlazeMaster® 88065 Orange 734 O	ASTM D1784 24447
CPVC 4120-06+++	1	BlazeMaster® 88738 Orange 734 G	ASTM D1784 23547
CPVC 4120-06+++	1	BlazeMaster® 88738 Orange 734 M	ASTM D1784 23547
CPVC+++	1	Corzan ® 3140 HP Gray 211	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3118 Gray 211	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3118 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	Corzan® 3120 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3120 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	Corzan® 3122 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3130 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	Corzan® 3130 Gray 245	ASTM D1784 23447
CPVC+++	1	Corzan® 3140 HP Gray 245	ASTM D1784 24448
CPVC+++	2	Corzan® 3142 Gray 245	ASTM D1784 23437
CPVC+++	1	Corzan® 3160 Gray 211	ASTM D1784 24448
CPVC+++	1	Corzan® 3160 Gray 245	ASTM D1784 24448
CPVC+++	1	Corzan® 3175 Gray 245	ASTM D1784 24448
CPVC+++	2	Corzan® 3212 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	2	Corzan® 3212 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	Corzan® 3212 Gray 246	ASTM D1784 23447
CPVC+++	2	Corzan® 3214 Gray 214	ASTM D1784 23447
CPVC+++	2	Corzan® 3214 Gray 246	ASTM D1784 23447
CPVC+++	2	Corzan® 3214 Gray 247	ASTM D1784 23447
CPVC 4120+++	4	Corzan® 3216 Gray 245	ASTM D1784 24446
CPVC+++	2	Corzan® 3236 Gray 211	ASTM D1784 23447
CPVC+++	2	Corzan® 3236 Gray 245	ASTM D1784 23447
CPVC+++	2	Corzan® 3244 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	FlowGuard 3165 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	FlowGuard Gold 3107 Blue 470	ASTM D1784 24448
CPVC 4120-05+++	1	FlowGuard Gold® 3107 Tan 309	ASTM D1784 24448
CPVC+++	1	FlowGuard Gold® 3115HP Tan 309	ASTM D1784 24448
CPVC 4120-05+++	2	FlowGuard Gold® 3215 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 3249 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 3253 Tan 309	ASTM D1784 23447
CPVC+++	2	FlowGuard Gold® 88027 Tan 309	ASTM D1784 23447
CPVC+++	1	FlowGuard Gold® 9115 HP Tan 309	ASTM D1784 24448
CPVC+++	1	FlowGuard Gold® 9115 Tan 309	ASTM D1784 24448
CPVC+++	2	FlowGuard Gold® 9253 Tan 309	ASTM D1784 23447
CPVC+++	1	FlowGuard® 3137-Gray 245	ASTM D1784 23447
CPVC+++	2	FlowGuard® 3217 Blue 480	ASTM D1784 23447
CPVC 4120-05+++	1	FlowGuard® 88361 Gray 246	ASTM D1784 23448
CPVC 4120-05+++	1	FlowGuard® 88361 Tan 311	ASTM D1784 23448
CPVC 4120-05	1	FlowGuard® 88362 Gray 246	ASTM D1784 23448
CPVC 4120-05+++	1	FlowGuard® 88362 Tan 311	ASTM D1784 23448
CPVC+++	1	FlowGuard® 9115 Blue 480	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3107 Blue 470	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3107 Tan 309	ASTM D1784 24448
CPVC+++	1	TempRite® 3115 Tan 309	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3118 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 3120 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 3140 Gray 245	ASTM D1784 24448
CPVC+++	1	TempRite® 3160 Gray 211	ASTM D1784 24448
CPVC+++	1	TempRite® 3160 Gray 245	ASTM D1784 24448
CPVC+++	2	TempRite® 3210 Gray 215	ASTM D1784 23447
CPVC+++	2	TempRite® 3214 Gray 247	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 3215 Blue 470	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 3215 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 3217 Blue 480	ASTM D1784 23447
CPVC 4120+++	4	TempRite® 3230 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 3238 Orange 734 O	ASTM D1784 24447
CPVC+++	2	TempRite® 3249 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 3253 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 3253 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 88031 Gray 211	ASTM D1784 23447
CPVC+++	2	TempRite® 88031 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	2	TempRite® 88065 Orange 734 G	ASTM D1784 24447
CPVC 4120-05+++	2	TempRite® 88065 Orange 734 O	ASTM D1784 24447
CPVC+++	2	TempRite® 88096 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 88098 Brown 394	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Tan 309	ASTM D1784 23447
CPVC+++	2	TempRite® 88099 Tan 311	ASTM D1784 23447
CPVC+++	2	TempRite® 88214 Gray 214	ASTM D1784 23447
CPVC+++	2	TempRite® 88214 Gray 247	ASTM D1784 23447
CPVC+++	2	TempRite® 88236 Gray 211	ASTM D1784 23447
CPVC+++	2	TempRite® 88236 Gray 245	ASTM D1784 23447
CPVC+++	2	TempRite® 88244 Black 294	ASTM D1784 23447
CPVC+++	2	TempRite® 88244 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88601 Tan 309	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88611 Gray 045	ASTM D1784 23447
CPVC+++	1	TempRite® 88616 Gray 245	ASTM D1784 23447
CPVC+++	1	TempRite® 88616 Tan 309	ASTM D1784 23447
CPVC+++	1	TempRite® 88619 Gray 245	ASTM D1784 23448
CPVC+++	1	TempRite® 88619 Tan 309	ASTM D1784 23448
CPVC 4120-05+++	1	TempRite® 88628 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Gray 245	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Tan 309	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88628 Tan 309A	ASTM D1784 23447
CPVC+++	1	TempRite® 88631 Gray 246	ASTM D1784 23448
CPVC+++	1	TempRite® 88631 Tan 311	ASTM D1784 23448
CPVC+++	1	TempRite® 88632 Gray 246	ASTM D1784 23448
CPVC+++	1	TempRite® 88632 Tan 311	ASTM D1784 23448
CPVC 4120+++	4	TempRite® 88641 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88642 Tan 309	ASTM D1784 23547
CPVC 4120-06+++	1	TempRite® 88653 Orange 700	ASTM D1784 24448
CPVC 4120-06+++	1	TempRite® 88653 Orange 734	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 88659 Tan 309	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88662 Gray 245	ASTM D1784 24448
CPVC 4120-05+++	1	TempRite® 88708 Gray 211	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 213	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 215	ASTM D1784 23447
CPVC 4120-05+++	1	TempRite® 88708 Gray 245	ASTM D1784 23447
CPVC 4120-06+++	1	TempRite® 88738 Orange 734	ASTM D1784 23547
CPVC 4120-06+++	1	TempRite® 88738 Orange 734 G	ASTM D1784 23547
CPVC+++	1	TempRite® 89307 Gray 245	ASTM D1784 23447
CPVC+++	1	TempRite® 9115 Blue 480	ASTM D1784 24448
CPVC+++	2	TempRite® 9253 Tan 309	ASTM D1784 23447
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

$ This material is authorized for use in reclaimed water.
NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.  Trade Name colors that may appear the following way are also considered to be
      NSF Certified: BLACK or BLK; ORANGE or ORG; BLUE or BLU; GRAY or GRY; BROWN or BRN.

Mexichem Colombia SAS
Autopista Sur No. 71-75
Bogota
Colombia
57 1 782 5000

Facility : Bogota, Colombia

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing ^*	CPVC	Tuberia Presion HotPro CPVC	ASTM E84
1/2" - 1-1/4"
* Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50]. ^ Flame Spread Index <= 25, Smoke Developed Index <= 50

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings§ +++ [G]	CPVC	Accesorios Presion HotPro CPVC	ASTM D2846
Union Transition
3/4"
CPVC Transition Bushing
2"
Reduction Socket
3/4" x 1/2"
Transition Hub
3/4"
Clamps
1/2"
CPVC Reducing Tee
1/2" x 1/2" x 3/4"
Street Elbow 90°
1/2"
Street Elbow 45°
1/2"	3/4"
Street Elbow 90°
3/4"
Reduction Socket
1" x 3/4"
Clamps
3/4"
CPVC Reducing Tee
3/4" x 1/2" x 1/2"
Transition Hub
1"
CPVC Reducing Tee
3/4" x 1/2" x 3/4"
Transition Hub
1 1/4"
Street Elbow 45°
1"
Street Elbow 90°
1"
Transition Hub
1 1/2"
CPVC Reducing Tee
3/4" x 3/4" x 1/2"	1" x 1/2" x 1/2"	1" x 3/4" x 1/2"	1" x 3/4" x 3/4"
1" x 1" x 1/2"	1" x 1" x 3/4"	1 1/4" x 1 1/4" x 1/2"	1 1/4" x 1 1/4" x 3/4"
1 1/4" x 1" x 1"	1 1/4" x 1 1/4" x 1"	1 1/2" x 1 1/2" x 1/2"	1 1/2" x 1 1/2" x 3/4"
1 1/2" x 1 1/2" x 1"	1 1/2" x 1 1/2" x 1 1/4"	1 1/2" x 1" x 1"	2" x 2" x 1/2"
2" x 2" x 3/4"	2" x 2" x 1"	2" x 2" x 1 1/4"	2" x 2" x 1 1/2"
CPVC CAP (SLIP)
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CPVC COUPLING
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CPVC ELBOW 45°
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CPVC MALE ADAPTER
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CPVC TEE
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CPVC UNION
1/2"	3/4"
METAL CPVC TRANSITION
1/2"	3/4"
CPVC ELBOW 90°
1/2"	3/4"	1"	1 1/4"
1 1/2"	2"
CPVC FEMALE ADAPTER
3/4" x 1/4"	3/4" x 3/8"	3/4" x 1/2"	1"
CPVC REDUCED BUSHING
3/4" x 1/2"	1" x 1/2"	1" x 3/4"	1 1/4" x 1/2"
1 1/4" x 3/4"	1 1/4" x 1"	1 1/2" x 1/2"	1 1/2" x 3/4"
1 1/2" x 1"	1 1/2" x 1 1/4"	2"x 1/2"	2"x 3/4"
2"x 1"	2"x 1 1/4"	2"x 1 1/2"
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++	CPVC 4120	Tuberia Presion HotPro CPVC	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe+++	CPVC 4120	SuperTemp	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Mexichem Soluciones Integrales S.A. de C.V.
Avenida Paseo de la Reforma No. 483 PISO 47,
Entre las calles de Rio Elba y Rio de la Plata
Cuauhtemco, CDMX, 06500
Mexico
52 442 217 7970

Facility : Cuautitlán Izcalli, Mexico

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [G]	CPVC 4120	Wavin SuperTemp CPVC 4120	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

MIGHTY PLUMBING SOLUTIONS ADHESIVES LLC
227 Pine Meadow Court
North Brunswick, NJ 08902
United States
551-233-0405
Visit this company's website

Facility : #1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2]	CPVC	PW	ProWeld, CPVC Cement, Heavy Body, Orange/Yellow	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW	ProWeld, CPVC Cement, Medium Body, Orange/Yellow	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Black Swan Purple/Clear primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Mill-Rose Company
7310 Corporate Blvd
Mentor, OH 44060
United States
440-255-9171

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++	CPVC	PW, DWV, SW	Blue Monster 1-Step Yellow CPVC Cement	ASTM D2846
Solvent Cement+++	CPVC	PW, DWV, SW	Blue Monster 1-Step Yellow CPVC Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

NeoSeal Adhesive Pvt. Ltd.
A-323, Rajlaxmi Complex
Old Padra Road
Vadodara-390 007, Gujarat
India
91 266 7290073
Visit this company's website

Facility : Vadodara, India

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Ajay Flowline Plus CPVC Yellow Medium Bodied All Weather Fusion Compound	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Ajay Flowline Plus CPVC Yellow Medium Bodied All Weather Fusion Compound	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Ajay Industrial Heavy Duty Gray CPVC Pipe Adhesive 1106HBG	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Ajay Industrial Heavy Duty Gray CPVC Pipe Adhesive 1106HBG	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Almona 714 CPVC Heavy Bodied Solvent Cement Orange	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Almona 714 CPVC Heavy Bodied Solvent Cement Orange	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Clipper CPVC Solvent Cement Yellow	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Clipper CPVC Solvent Cement Yellow	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Dutron CPVC Solvent Cement-Yellow Medium Bodied;Low VOC(Dutron Polymers Limited)	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	E-Z Weld 227 Flowguard Gold Medium Body Yellow CPVC Cement	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	E-Z Weld 227 Flowguard Gold Medium Body Yellow CPVC Cement	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Flotek One-Step CPVC Cement Medium Body Yellow	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Flotek One-Step CPVC Cement Medium Body Yellow	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Flowkem CPVC Solvent Cement Yellow - Flowkem Poly Plast Pvt. Ltd.	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Flowkem CPVC Solvent Cement Yellow - Flowkem Poly Plast Pvt. Ltd.	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, PW, RW, SW	Fusion CPVC Solvent Cement Yellow - Fusion Industries Ltd.	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Fusion CPVC Solvent Cement Yellow - Fusion Industries Ltd.	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Hero CPVC Solvent Cement Yellow - Hero Agro Plast Pvt. Ltd.	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Hero CPVC Solvent Cement Yellow - Hero Agro Plast Pvt. Ltd.	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Neo-Weld 305 CPVC Medium Bodied Low VOC Cement	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Neo-Weld 305 CPVC Medium Bodied Low VOC Cement	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Neo-Weld 305 CPVC Medium Bodied Low VOC Cement (Creative Adhesive, Inc.)	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Neo-Weld 305 CPVC Medium Bodied Low VOC Cement (Creative Adhesive, Inc.)	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Neo-Weld 314 CPVC Heavy Bodied Low VOC Solvent Cement- Orange/Gray/Gold/Clear	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Neo-Weld 314 CPVC Heavy Bodied Low VOC Solvent Cement- Orange/Gray/Gold/Clear	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Neo-Weld 914 CPVC Heavy Bodied Low VOC Solvent Cement- Orange/Gray/Gold/Clear	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Neo-Weld 914 CPVC Heavy Bodied Low VOC Solvent Cement- Orange/Gray/Gold/Clear	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 302 CPVC Regular Bodied Low VOC Cement- Clear/Yellow/Gold/Oran	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 302 CPVC Regular Bodied Low VOC Cement- Clear/Yellow/Gold/Oran	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, SW, RW, PW	NeoSeal 305 CPVC Cement - Orange	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 305 CPVC Cement - Orange	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 305 CPVC Medium Bodied Low VOC Cement	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 305 CPVC Medium Bodied Low VOC Cement	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 305 CPVC Medium Body Low VOC Solvent Cement- Clear/Yellow/Gold	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 305 CPVC Medium Body Low VOC Solvent Cement- Clear/Yellow/Gold	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 305 CPVC Medium Body Low VOC Solvent Cement- Orange/Gray	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 305 CPVC Medium Body Low VOC Solvent Cement- Orange/Gray	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 314 CPVC Heavy Bodied Low VOC Solvent Cement- Orange/Gray/Gold/Clear	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal 314 CPVC Heavy Bodied Low VOC Solvent Cement- Orange/Gray/Gold/Clear	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal ACQUA WELD 914 Low VOC CPVC Solvent Cement Orange	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	NeoSeal ACQUA WELD 914 Low VOC CPVC Solvent Cement Orange	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Padmavati CPVC Solvent Cement - Yellow Medium Bodied Low VOC	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Padmavati CPVC Solvent Cement - Yellow Medium Bodied Low VOC	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Prince SmartFit Plus CPVC Heavy Bodied Solvent Cement Orange	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Prince SmartFit Plus CPVC Heavy Bodied Solvent Cement Orange	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Prince SmartFit Plus CPVC Medium Bodied Solvent Cement Yellow	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Prince SmartFit Plus CPVC Medium Bodied Solvent Cement Yellow	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-0914	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-0914	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-3051	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-3051	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-3052	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-3052	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-3053	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-3053	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-3054	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	SC-3054	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Sintex HotX CPVC Solvent Cement	ASTM D2846
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Sintex HotX CPVC Solvent Cement	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Skipper CPVC Solvent Cement - Low VOC One-Step Yellow	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	Skipper CPVC Solvent Cement - Low VOC One-Step Yellow	ASTM D2846
Solvent Cement% § +++ [G]	CPVC	DWV, RW, SW, PW	Sumolex CPVC Solvent Cement -Yellow Medium Bodied Low VOC	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	WATERTEC CPVC Medium Bodied Solvent Cement Low VOC Yellow	ASTM F493
Solvent Cement§ +++ [G]	CPVC	DWV, RW, SW, PW	WATERTEC CPVC Medium Bodied Solvent Cement Low VOC Yellow	ASTM D2846
% Product may also be marked as Sumolex CPVC Solvent Cement - Yellow Medium Bodied; Low VOC (Sumo Poly Plat Pvt. Ltd.). + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

New Products Industries Co., Ltd. (Neproplast)
Jeddah Industrial City, Phase 3
P.O. Box 460
Jeddah 21411
Saudi Arabia
966 2 636 3558
Visit this company's website

Facility : # 1 Jeddah, Saudi Arabia

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [1]	CPVC	Neproplast CPVC Pipes	ASTM F441
1/2" - 8"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.
Pipe+++ [1]	CPVC	Neproplast Flowguard CPVC Pipes	ASTM F441
1/2" - 8"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.

Facility : # 2 Jeddah, Saudi Arabia

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++	CPVC	Neproplast CPVC Coupling	ASTM F439
1/2" - 8"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast Flowguard CPVC Coupling	ASTM F439
1/2" - 8"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast CPVC Elbow 45°	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast Flowguard CPVC Elbow 45°	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast CPVC Elbow 90°	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast Flowguard CPVC Elbow 90°	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast CPVC Elbow S x F	ASTM F439
1/2" - 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast Flowguard CPVC Elbow S x F	ASTM F439
1/2" - 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings	CPVC	Neproplast CPVC Equal Tee	ASTM F439
1/2"- 6"
Fittings	CPVC	Neproplast Flowguard CPVC Equal Tee	ASTM F439
1/2"- 6"
Fittings	CPVC	Neproplast CPVC Male Threaded Adaptor	ASTM F439
1/2" - 2"
Fittings	CPVC	Neproplast Flowguard CPVC Male Threaded Adapt	ASTM F439
1/2" - 2"
Fittings	CPVC	Neproplast CPVC Reducer Tee	ASTM F439
6" x 6" x 4"
Fittings	CPVC	Neproplast Flowguard CPVC Reducer Tee	ASTM F439
6" x 6" x 4"
Fittings	CPVC	Namat CPVC Coupling	ASTM F439
1/2" - 8"
Fittings	CPVC	Namat Flowguard CPVC Coupling	ASTM F439
1/2" - 8"
Fittings+++	CPVC	Namat CPVC Elbow 45°	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Namat Flowguard CPVC Elbow 45°	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Namat CPVC Elbow 90°	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Namat Flowguard CPVC Elbow 90°	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Namat CPVC Elbow S x F	ASTM F439
1/2" - 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Namat Flowguard CPVC Elbow S x F	ASTM F439
1/2" - 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast CPVC End Cap	ASTM F439
1/2" - 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast Flowguard CPVC End Cap	ASTM F439
1/2" - 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Namat CPVC Equal Tee	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Namat Flowguard CPVC Equal Tee	ASTM F439
1/2"- 6"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings	CPVC	Namat CPVC Male Threaded Adaptor	ASTM F439
1/2" - 2"
Fittings	CPVC	Namat Flowguard CPVC Male Threaded Adaptor	ASTM F439
1/2" - 2"
Fittings+++	CPVC	Neproplast CPVC Reducer Bush	ASTM F439
3/4" x 1/2"
1" x 3/4"
1 1/4" x 3/4"
1 1/4" x 1"
1 1/2" x 3/4"
1 1/2" x 1 1/4"
2" x 1"
2" x 1 1/4"
2" x 1 1/2"
3" x 1"
3" x 2"
3" x 2 1/2"
4" x 2"
4" x 3"
6" x 4"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Neproplast Flowguard CPVC Reducer Bush	ASTM F439
3/4" x 1/2"
1" x 3/4"
1 1/4" x 3/4"
1 1/4" x 1"
1 1/2" x 3/4"
1 1/2" x 1 1/4"
2" x 1"
2" x 1 1/4"
2" x 1 1/2"
3" x 1"
3" x 2"
3" x 2 1/2"
4" x 2"
4" x 3"
6" x 4"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Fittings+++	CPVC	Namat CPVC Reducer Tee	ASTM F439
6" x 6" x 4"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

NIBCO INC.
World Headquarters
1516 Middlebury Street
Elkhart, IN 46516-4740
United States
574-295-3000
Visit this company's website

Facility : Blytheville, AR

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Valves# + § [G]	CPVC	NIBCO/Chemtrol	ASTM F1970
Single-Union Ball Valve - FPM
F51SU-V 1/2" - 2"	S51SU-V 1/2" - 2"	T51SU-V 1/2" - 2"
True Union Ball Valves - FPM
F51TB-V 1/2" - 6"	S51TB-V 3" - 6"	T51TB-V 3" - 4"
True-Union Ball Check, Foot, and Vent Valves - FPM
F51BC-V 1/2" - 4"	S51BC-V 3" - 4"	T51BC-V 3" - 4"	U51BC-V 1/2" - 2"
True-Union Diverter Ball Valves-FPM@@@
F51D2-V 1/2" - 2"	S51D2-V 1/2" - 2"	T51D2-V 1/2" - 2"
True-Union Multiport Ball Valves-FPM@@
F51M3-V 1/2" - 2"	S51M3-V 1/2" - 2"	T51M3-V 1/2" - 2"
@@@ 3-Way/2-Position @@ 3-Way/3-Position # Product tested for use in cold water (73°F) applications with a rated pressure of 150 PSI. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves! + § ## [G]	CPVC	NIBCO/Chemtrol	ASTM F1970
True-Union Ball Valves - FPM
NU51TB-V 1/2" - 2"	U51TB-V 1/2" - 2"	U51TB-V-BBV 1/2" - 2"
! Product may or may not bear the NSF U.P. code marking. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ## Product tested for use in cold water (73°F) applications with a rated pressure of 250 PSI. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves! # + § [G]	CPVC	NIBCO/Chemtrol	ASTM F1970
Single-Union Ball Valves - EPDM
F51SU-E 1/2" - 2"	S51SU-E 1/2" - 2"	T51SU-E 1/2" - 2"
True-Union Ball Check, Foot, and Vent Valves- EPDM
F51BC-E 1/2" - 4"	S51BC-E 3" - 4"	T51BC-E 3" - 4"	U51BC-E 1/2" - 2"
True-Union Ball Valves - EPDM
F51TB-E 1/2" - 6"	S51TB-E 3" - 6"	T51TB-E 3" - 4"
True-Union Diverter Ball Valves-EPDM@@@
F51D2-E 1/2" - 2"	S51D2-E 1/2" - 2"	T51D2-E 1/2" - 2"
True-Union Multiport Ball Valves-EPDM@@@
F51M3-E 1/2" - 2"	S51M3-E 1/2" - 2"	T51M3-E 1/2" - 2"
@@@ 3-Way/2-Position ! Product may or may not bear the NSF U.P. code marking. # Product tested for use in cold water (73°F) applications with a rated pressure of 150 PSI. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves! + § ## [G]	CPVC	NIBCO/Chemtrol	ASTM F1970
True-Union Ball Valves – EPDM
NU51TB-E 1/2" - 2"	U51TB-E 1/2" - 2"	U51TB-E-BBV 1/2" - 2"
! Product may or may not bear the NSF U.P. code marking. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ## Product tested for use in cold water (73°F) applications with a rated pressure of 250 PSI. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Goshen, IN

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings! # ¢ § +++ [G]	CPVC	NIBCO	ASTM D2846
45° Ell
4706 1/2" - 2"
45° Street Elbow
4706-2 1/2" - 2"
90° Drop Ear Ell, Slip x Slip
1/2" 4707-5
90° Ell
4707 1/2" - 2"
90° Street Elbow
4707-2 1/2" - 2"
Bushing
4718 1/2" - 2"
Cap
4717 1/2" - 2"
Coupling
4701 1/2" - 2"
Male Adapter
4704 1/2" - 2"
Tee
4711 1/2" - 2"
Transition Bushing
4718-T 1/2" - 2"
Transition Coupling
4701-T 1/2" - 2"
! Product may or may not bear the NSF U.P. code marking. # Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# % ¢ +++ [G]	CPVC	NIBCO	ASTM D2846
90º Drop Ear Ell, Slip x FIPT
1/2" 4707-3-5
Adapter
4703
# Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC. % Product is Certified for use as a non-repeating fitting, not Certified when installed within 30-feet of any other transition fitting. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings! # ¢ § +++ [G]	CPVC	NIBCO	CSA B137.6
45° Ell
4706 1/2" - 2"
45° Street Elbow
4706-2 1/2" - 2"
90° Drop Ear Ell, Slip x Slip
1/2" 4707-5
90° Ell
4707 1/2" - 2"
90° Street Elbow
4707-2 1/2" - 2"
Bushing
4718 1/2" - 2"
Cap
4717 1/2" - 2"
Coupling
4701 1/2" - 2"
Male Adapter
4704 1/2" - 2"
Tee
4711 1/2" - 2"
Transition Bushing
4718-T 1/2" - 2"
Transition Coupling
4701-T 1/2" - 2"
! Product may or may not bear the NSF U.P. code marking. # Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings# % ¢ +++ [G]	CPVC	NIBCO	CSA B137.6
90º Drop Ear Ell, Slip x FIPT
1/2" 4707-3-5
Adapter
4703
# Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC. % Product is Certified for use as a non-repeating fitting, not Certified when installed within 30-feet of any other transition fitting. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings (PW)! # § ## +++ [G]	CPVC	NIBCO/Chemtrol	ASTM F1970
Blind Flange[1]
5119
Socket Flange
5151
Thread Flange
5151-W-3	5151-H-3
Union, Socket
5133	5133-E
Union, Socket and Threaded
5133-3	5133-E-3
Union, Threaded
5133-3-3	5133-E-3-3
Van Stone Flange
5151-A	5151-2-A
[1] Possible "X" flange variations are as follows: (H) – Solid Design, Blind or Socket (W) – Webbed Design, Blind or Socket (H-3) – Solid Design, Threaded (FPT) (W-3) – Webbed Design, Threaded (FPT) (A) – Van Stone, Socket ! Product may or may not bear the NSF U.P. code marking. # Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ## Product tested for use in cold water (73°F) applications with a rated pressure of 150 PSI. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves! + § ## [G]	CPVC	NIBCO/Chemtrol	ASTM F1970
Single-Union Ball Valve - FPM
F51SU-V 1/2" - 2"	T51SU-V 1/2" - 2"	S51SU-V 1/2" - 2"
True Union Ball Valves - FPM
S51TB-V 3" - 6"	F51TB-V 1/2" - 6"	T51TB-V 3" - 4"
True-Union Ball Check, Foot, and Vent Valves - FPM
S51BC-V 3" - 4"	T51BC-V 3" - 4"	U51BC-V 1/2" - 2"	F51BC-V 1/2" - 4"
True-Union Diverter Ball Valves-FPM @@@
T51D2-V 1/2" - 2"	F51D2-V 1/2" - 2"	S51D2-V 1/2" - 2"
True-Union Multiport Ball Valves-FPM @@
T51M3-V 1/2" - 2"	F51M3-V 1/2" - 2"	S51M3-V 1/2" - 2"
! Product may or may not bear the NSF U.P. code marking. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ## Product tested for use in cold water (73°F) applications with a rated pressure of 150 PSI. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings! § +++ [G]*	CPVC 41	NIBCO/Chemtrol	ASTM F439
45° Ell Sch 80
5106 1/4"- 12"	5106-3-3 1/4" - 12"
90° Ell Sch 80
5107 1/4" - 12"	5107-3 1/4" - 12"	5107-3-3 1/4" - 12"
Adapters Sch 80
5103 1/4" - 12"	5104 1/4" - 12"
Bushing Sch 80
5118 1/4" -12"	5118-3 1/4" - 12"	5118-3-4 1/4" - 12"
Cap Sch 80
5117 1/4" - 12"	5117-3 1/4" - 12"
Coupling Sch 80
5101 1/4" - 12"	5101-3-3 1/4" - 12"
Plug Sch 80
5116-4 1/4" - 12"
Tee Sch 80
5111 1/4" - 12"	5112 1/4" - 12"	5112-3-3 1/4" - 12"
! Product may or may not bear the NSF U.P. code marking. * Copper C12200 § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Oatey Company
20600 Emerald Parkway
Cleveland, OH 44135
United States
800-203-1155
216-267-7100
Visit this company's website

Facility : # 1 Cleveland, OH

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	AJAY Flowline Plus CPVC Yellow Medium Bodied All Weather Fusion	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Ajay FlowGuard Gold® Yellow Medium Bodied All Weather CPVC Fusion Compound	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Almunif Pipes Heavy Duty Orange Heavy Bodied Orange Solvent Cement 914	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Ashrivad 1-Step CPVC Cement FlowGuard Gold Yellow Med Bodied All Weather CPVC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Chanal 614 Heavy Bodied Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	EP 22 Lo-VOC CPVC Heavy Duty Gray Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	EP 22 Lo-VOC CPVC Heavy Duty Orange Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Fix-On 814 CPVC Cement Orange Heavy Duty Solvent Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Foset Flowguard Cemento Blanco Del Paso Con Indicator UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Hercules Orange CPVC Medium Body Fast Set Plastic Pipe Cement LOW VOC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Hercules Orange 914 CPVC Heavy Bodied Pipe Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	MMP Heavy Duty Orange Heavy Bodied Orange Solvent Cement 914	ASTM F493
Solvent Cement% ¢ +++ [2]	CPVC	PW, DWV, SW	Masters CPVC-Pro Clear Cement	CSA B137.6
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Masters CPVC-Pro Clear Cement	ASTM F477
Solvent Cement% +++	CPVC	PW, DWV, SW	Oatey "Hot" Heavy Duty Orange Lava CPVC Repair Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey 42 Heavy Duty Gray Industrial CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey 42 Heavy Duty Orange Industrial CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey 914 Orange Heavy Bodied CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey CEMENTO AMARILLO DE CPVC DE 1 SOLO PASO	ASTM F493
Solvent Cement% ¢ +++ [2]	CPVC	PW, DWV, SW	Oatey CPVC Cement Medium Clear	CSA B137.6
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Oatey CPVC Cement Medium Clear	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey CPVC FlowGuard Gold Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey CPVC Heavy Bodied Gray Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey EP42 Lo-VOC CPVC Heavy Duty Orange Industrial Cement	ASTM F493
Solvent Cement% ¢ +++ [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Gold One-Step CPVC Cement	CSA B137.6
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Gold One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Yellow All Weather One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Yellow, All Weather One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold UVI Medium Yellow	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard High Contrast Medium Green, All Weather One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Medium Green All Weather One Step CPVC Cement	ASTM F493
Solvent Cement% + [1] [2] [3]	CPVC	PW, DWV, SW	Oatey Flowguard Cemento Blanco De 1 Paso Con Indicador UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Flowguard Cemento Blanco De 1 Paso Con Indicator UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Heavy Duty Gray CPVC Cement	ASTM F493
Solvent Cement% ¢ +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Heavy Duty Gray CPVC Cement	CSA B137.6
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Heavy Duty Gray CPVC Cement Industrial Grade	ASTM F493
Solvent Cement% ¢ +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Heavy Duty Orange CPVC Cement	CSA B137.6
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Heavy Duty Orange CPVC Cement	ASTM F493
Solvent Cement% ¢ +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Industrial Heavy Duty Gray CPVC Cement	CSA B137.6
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Industrial Heavy Duty Gray Cement	ASTM F493
Solvent Cement% ¢ +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Industrial Heavy Duty Orange CPVC Cement	CSA B137.6
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Industrial Heavy Duty Orange Cement	ASTM F493
Solvent Cement% + [1] [2]	CPVC	PW, DWV, SW	Oatey Mediano Amarillo Todo Clima Cemento de 1 Paso para CPVC	ASTM F493
Solvent Cement% + [1] [2]	CPVC	PW, DWV, SW	Oatey Mediano Naranja Cemento para CPVC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Bodied Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Oatey Medium Clear CPVC Cement	ASTM F493
Solvent Cement% ¢ +++ [2]	CPVC	PW, DWV, SW	Oatey Medium Clear CPVC Cement	CSA B137.6
Solvent Cement% + [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Clear Low VOC PVC Cement	ASTM D2564
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Orange CPVC Cement	ASTM F493
Solvent Cement% + [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Yellow All Weather One-step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Yellow, All Weather One-Step CPVC Cemen	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey SAPPCO Heavy Duty 914 Orange CPVC Cement	ASTM F493
Solvent Cement% +++	CPVC	PW, DWV, SW	One-Step 'Hot' Heavy Duty Orange Lava CPVC Cut-In Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Supreme Medium Bodied CPVC Solvent Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Supreme Medium Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Uni-Weld 3200 CPVC Cement Medium Orange	ASTM F493
% Only products bearing the NSF Mark are Certified. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Oatey Clear and Purple Primers. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con Indicador UV Mediano. Todo clima Cemento de 1 Paso para CPVC

Facility : Omaha, NE

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement% +++ [1] [2]	CPVC	DWV, PW, SW	AJAY Flowline Plus CPVC Yellow Medium Bodied All Weather Fusion	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Ajay FlowGuard Gold® Yellow Medium Bodied All Weather CPVC Fusion Compound	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Ashrivad 1-Step CPVC Cement FlowGuard Gold Yellow Medium Bodied All Weather CPVC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Foset Flowguard Cemento Blanco Del Paso Con Indicator UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Hercules CPVC Gold Cement Low VOC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Hercules Orange CPVC Medium Body Fast Set Plastic Pipe Cement LOW VOC	ASTM F493
Solvent Cement% ¢ +++ [2]	CPVC	PW, DWV, SW	Masters CPVC-Pro Clear Cement	CSA B137.6
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Masters CPVC-Pro Clear Cement	ASTM F477
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey CEMENTO AMARILLO DE CPVC DE 1 SOLO PASO	ASTM F493
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Oatey CPVC Cement Medium Clear	ASTM F493
Solvent Cement% ¢ +++ [2]	CPVC	PW, DWV, SW	Oatey CPVC Cement Medium Clear	CSA B137.6
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey CPVC FlowGuard Gold Cement	ASTM F493
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Oatey Cemento de CPVC Blazemaster® Red CPVC Lo-VOC One Step Cement	ASTM F493
Solvent Cement% ¢ +++ [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Gold One-Step CPVC Cement	CSA B137.6
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Gold One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Yellow All Weather One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Yellow, All Weather One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold UVI Medium Yellow	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard High Contrast Medium Green, All Weather One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard High Resolution Medium Green One Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Medium Green All Weather One Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2] [5]	CPVC	PW, DWV, SW	Oatey Flowguard Cemento Blanco De 1 Paso Con Indicador UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Flowguard Cemento Blanco De 1 Paso Con Indicator UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Industrial Medium Orange Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Mediano Amarillo Todo Clima Cemento de 1 Paso para CPVC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Mediano Naranja Cemento para CPVC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Bodied Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Oatey Medium Clear CPVC Cement	ASTM F493
Solvent Cement% ¢ +++ [2]	CPVC	PW, DWV, SW	Oatey Medium Clear CPVC Cement	CSA B137.6
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Yellow All Weather One-step CPVC Cement	ASTM F493
Solvent Cement% +++ [3]	CPVC	PW, DWV, SW	Oatey “Hot” Heavy Duty Orange Lava CPVC Repair Cement	ASTM F493
Solvent Cement% +++ [3]	CPVC	PW, DWV, SW	One-Step 'Hot' Heavy Duty Orange Lava CPVC Cut-In Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Supreme Medium Bodied CPVC Solvent Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Supreme Medium Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [2]	CPVC	PW, DWV, SW	Tyco Blazemaster® TFP-600 Red CPVC Lo-VOC Cement One Step Heavy Bodied	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Uni-Weld 3200 CPVC Cement Medium Orange	ASTM F493
% Only products bearing the NSF Mark are Certified. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Oatey Purple Primer. [2] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] Product intended for use without a primer. [4] NSF-Certified Oatey Clear or Purple primer is required. [5] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con Indicador UV Mediano. Todo clima Cemento de 1 Paso para CPVC

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

Facility : Apodaca, Nuevo Léon, Mexico

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Ajay FlowGuard Gold® Yellow Medium Bodied All Weather CPVC Fusion Compound 2	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Foset Flowguard Cemento Blanco Del Paso Con Indicator UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Medium Yellow All Weather One-step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2] [3]	CPVC	PW, DWV, SW	Oatey Flowguard Cemento Blanco De 1 Paso Con Indicator UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey, Mediano Naranja Cemento para CPVC	ASTM F493
Solvent Cement% +++ [1] [2] [5]	CPVC	PW, DWV, SW	Ashrivad 1-Step CPVC Cement FlowGuard Gold Yellow Medium Bodied All Weather CPVC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	AJAY Flowline Plus CPVC Yellow Medium Bodied All Weather Fusion Compound	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Hercules CPVC Gold Cement Low VOC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Hercules Multi Purpose Milky/Gold - Low VOC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Hercules Orange CPVC Medium Body Fast Set Plastic Pipe Cement LOW VOC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Hercules Orange Medium Body Fast-Set CPVC - Low VOC	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey CEMENTO AMARILLO DE CPVC DE 1 SOLO PASO	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey CPVC FlowGuard Gold Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Flowguard Cemento Blanco De 1 Paso Con Indicator UV Mediano	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Gold One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold Medium Yellow All Weather One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Gold UVI Medium Yellow	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard High Contrast Medium Green, All Weather One-Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey FlowGuard Medium Green All Weather One Step CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Industrial Medium Orange Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Bodied Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Oatey Medium Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Supreme Medium Bodied CPVC Solvent Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Supreme Medium Orange CPVC Cement	ASTM F493
Solvent Cement% +++ [1] [2]	CPVC	PW, DWV, SW	Uni-Weld 3200 CPVC Cement Medium Orange	ASTM F493
Solvent Cement% ++ [2] [6]	CPVC	PW, DWV, SW	CONTACT CEMENTO PARA CPVC	ASTM F493
Solvent Cement% ++ [2] [6]	CPVC	PW, DWV, SW	CONTACT CEMENTO DISOLVENTE AMARILLO CPVC	ASTM F493
Solvent Cement% ++ [2] [6]	CPVC	PW, DWV, SW	CONTACT CEMENTO DISOLVENTE PARA CPVC	ASTM F493
Solvent Cement% ++ [2] [6]	CPVC	PW, DWV, SW	Cemento disolvente CPVC CONTACT	ASTM F493
Solvent Cement% ++ [2] [6]	CPVC	PW, DWV, SW	Cemento disolvente CPVC CONTACT 227	ASTM F493
Solvent Cement% ++ [2] [6]	CPVC	PW, DWV, SW	Contact CPVC	ASTM F493
Solvent Cement% ++ [2] [6]	CPVC	PW, DWV, SW	Contact CPVC Solvent Cement	ASTM F493
% Only products bearing the NSF Mark are Certified. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Oatey Clear and Purple Primers. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con Indicador UV Mediano. Todo clima Cemento de 1 Paso para CPVC. [5] Product's full trade designation is: Ashrivad 1Step CPVC Cement FlowGuard Gold Yellow Medium Bodied All Weather CPVC Cement [6] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and CONTACT 211 or CONTACT 212 primer.

Parabond Pipe Cement Company, Inc.
190 East Washington Street
Chagrin Falls, OH 44022
United States
877-803-3274
407-240-4154

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	PARABOND P-18 Orange CPVC	ASTM D2846
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	PARABOND P-18 Orange CPVC	ASTM F493
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	PARABOND P-20 Orange CPVC	ASTM F493
Solvent Cement* ~ +++ [1] [2] [G]	CPVC	PW, DWV, SW	PARABOND® P-19™ One Step CPVC Cement	ASTM F493
Solvent Cement* ~ +++ [1] [2] [G]	CPVC	PW, DWV, SW	PARABOND® P-19™ One Step CPVC Cement	CSA B137.6
Solvent Cement! § +++ [1] [2] [G]	CPVC	PW, DWV, SW	Parabond P-20B Orange CPVC	ASTM F493
! Product is Certified whether or not it bears the U.P. Code Mark. * This cement is yellow color. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ Product is authorized to bear the cNSF Mark. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined on the testing of pipe and fittings assembled using the cement and Parabond C-60 Clear and Purple Primers. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Plast-O-Matic Valves, Inc.
1384 Pompton Avenue
Cedar Grove, NJ 07009
United States
973-256-3000
Visit this company's website

Facility : Kaohsiung, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Valves^ +++ [G]	CPVC	BT645	ASTM F1970
True Union (double Union) ball valve
050EPFL-CP 1/2"	050EPS-CP 1/2"	050EPT-CP 1/2"	050VFL-CP 1/2"
050VS-CP 1/2"	050VT-CP 1/2"	075EPFL-CP 3/4"	075EPS-CP 3/4"
075EPT-CP 3/4"	075VFL-CP 3/4"	075VS-CP 3/4"	075VT-CP 3/4"
100EPFL-CP 1"	100EPS-CP 1"	100EPT-CP 1"	100VFL-CP 1"
100VS-CP 1"	100VT-CP 1"	125EPFL-CP 1 1/4"	125EPS-CP 1 1/4"
125EPT-CP 1 1/4"	125VFL-CP 1 1/4"	125VS-CP 1 1/4"	125VT-CP 1 1/4"
150EPFL-CP 1 1/2"	150EPS-CP 1 1/2"	150EPT-CP 1 1/2"	150VFL-CP 1 1/2"
150VS-CP 1 1/2"	150VT-CP 1 1/2"	200EPFL-CP 2"	200EPS-CP 2"
200EPT-CP 2"	200VFL-CP 2"	200VS-CP 2"	200VT-CP 2"
250EPFL-CP 2 1/2"	250EPS-CP 2 1/2"	250EPT-CP 2 1/2"	250VFL-CP 2 1/2"
250VS-CP 2 1/2"	250VT-CP 2 1/2"	300EPFL-CP 3"	300EPS-CP 3"
300EPT-CP 3"	300VFL-CP 3"	300VS-CP 3"	300VT-CP 3"
400EPFL-CP 4"	400EPS-CP 4"	400EPT-CP 4"	400VFL-CP 4"
400VS-CP 4"	400VT-CP 4"
^ Valve rated at 150 PSI and 73°F +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves^ +++ [G]	CPVC	BT646	ASTM F1970
True Union (double Union) ball valve
050EPFL-CP 1/2"	050EPS-CP 1/2"	050EPT-CP 1/2"	050VFL-CP 1/2"
050VS-CP 1/2"	050VT-CP 1/2"	075EPFL-CP 3/4"	075EPS-CP 3/4"
075EPT-CP 3/4"	075VFL-CP 3/4"	075VS-CP 3/4"	075VT-CP 3/4"
100EPFL-CP 1"	100EPS-CP 1"	100EPT-CP 1"	100VFL-CP 1"
100VS-CP 1"	100VT-CP 1"	125EPFL-CP 1 1/4"	125EPS-CP 1 1/4"
125EPT-CP 1 1/4"	125VFL-CP 1 1/4"	125VS-CP 1 1/4"	125VT-CP 1 1/4"
150EPFL-CP 1 1/2"	150EPS-CP 1 1/2"	150EPT-CP 1 1/2"	150VFL-CP 1 1/2"
150VS-CP 1 1/2"	150VT-CP 1 1/2"	200EPFL-CP 2"	200EPS-CP 2"
200EPT-CP 2"	200VFL-CP 2"	200VS-CP 2"	200VT-CP 2"
250EPFL-CP 2 1/2"	250EPS-CP 2 1/2"	250EPT-CP 2 1/2"	250VFL-CP 2 1/2"
250VS-CP 2 1/2"	250VT-CP 2 1/2"	300EPFL-CP 3"	300EPS-CP 3"
300EPT-CP 3"	300VFL-CP 3"	300VS-CP 3"	300VT-CP 3"
400EPFL-CP 4"	400EPS-CP 4"	400EPT-CP 4"	400VFL-CP 4"
400VS-CP 4"	400VT-CP 4"
^ Valve rated at 150 PSI and 73°F +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Valves^ +++ [G]	CPVC	MBV	ASTM F1970
True Union (double Union) ball valve
300EPFL-CP 3"	300EPS-CP 3"	300EPT-CP 3"	300VFL-CP 3"
300VS-CP 3"	300VT-CP 3"	400CFL-CP 4"	400EPFL-CP 4"
400EPS-CP 4"	400EPT-CP 4"	400VS-CP 4"	400VT-CP 4"
^ Valve rated at 150 PSI and 73°F +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Plastics Technology de Mexico S. de R.L. de C.V.
Av. Montes Urales #8 Parque Opción
Los Nogales, San Jose Iturbide
Guanajuato 37980
Mexico
52 41 919 88600
52 41 919 88600
Visit this company's website

Facility : Guanajuato, Mexico

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [G]	CPVC 4120-06	PTM	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120-06	PTM	*SE 8225*
1/2" - 2" SDR 13.5
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

RECTORSEAL
2601 Spenwick Drive
Houston, TX 77055
United States
800-231-3345
713-263-8001
Visit this company's website

Facility : # 7 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	RectorSeal Charlie 412L Orange CPVC Regular Body Cement	ASTM F493
Solvent Cement*** [2] [3] [G]	CPVC	PW, DWV, SW	RectorSeal Dura-Gold 627L Yellow CPVC Medium Body Cement	ASTM F493
Solvent Cement§ +++ [2] [3] [G]	CPVC	PW, DWV, SW	RectorSeal Heavy Duty 811L Orange CPVC Heavy Body Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. *** Cements Certified to CSA B137.6 must be clear or yellow oxide in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and RectorSeal Clear PR-2L clear primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Rectorseal Clear or purple Primers. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reliance Worldwide Corporation
2300 Defoor Hills Road
Atlanta, GA 30318
United States
800-486-5256
Visit this company's website

Facility : Huangyan, Taizhou, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [G]	CPVC	ERA	ASTM D2846
45° Elbow
1/2" 88763N	3/4" 88764N	1" 88765N	1 1/4" 88722
1 1/2" 88723	2" 88724
90° Elbow
1/2" 88754N	3/4" 88755N	1" 88756N	1 1/4" 88712
1 1/2" 88714	2" 88716
90° Female Wing Elbow
1/2" 85762
90° Street Elbow
1/2" 85757
90° Wing Elbow
1/2" 88761N
End Cap
1/2" 88781N	3/4" 88782N	1" 88783N	1 1/4" 88784
1 1/2" 88785	2" 88786
Female Adaptor
1/2" 88779N	3/4" 88780N	1" 88732	1 1/4" 88734
1 1/2" 88736	2" 88738
Male Adaptor
1/2" 88776N	3/4" 88777N	1" 88778N	1 1/4" 88728
1 1/2" 88729	2" 88730N
Reducing Bush
3/4" x 1/2" 88773N	1" x 1/2" 88774N	1" x 3/4" 88775N	1 1/4" x 3/4" 88702
1 1/4" x 1" 88703	1 1/2" x 1" 88792	1 1/2" x 1 1/4" 88704	2" x 3/4" 88794
2" x 1" 88795	2" x 1 1/4" 88705	2" x 1 1/2" 88706
Reducing Tee
3/4" x 1/2" x 1/2" 88769N	3/4" x 3/4" x 1/2" 88742	3/4" x 1/2" 88770N	1" x 3/4" 88772N
1 1/4" x 3/4" 88796	1 1/4" x 1" 88799	1 1/2" x 3/4" 88793	2" x 3/4" 88797
2" x 1 1/2" 88798
Socket
1/2" 88750N	3/4" 88751N	1" 88752N	1 1/4" 88744
1 1/2" 88745	2" 88746
Straight Tee
1/2" 88766N	3/4" 88767N	1" 88768N	1 1/4" 88725
1 1/2" 88726	2" 88727
Transition Bush
1 1/2" 88701	2" 88707
Union
1/2" 86038N	3/4" 86039N
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++	CPVC	ERA	ASTM D2846
1/2" 85784
3/4" 85785
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Safra Co. Ltd
3rd Floor, Xenel Industries Limited Building, King Abdul Aziz Street, Po Box 282
4
Jeddah, 02 21461
Saudi Arabia
+966 12 604 8733

Facility : Saudi Arabia

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cements+++ [1] [2] [3]

CPVC

PW, DWV, SW

SafraBond CPVC Cement

ASTM F493

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This is a one-step solvent cement and is not intended for use with a primer
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effects requirements of NSF/ANSI Standard
    61 is evaluated based on pipe and fittings assembled using the cement without a primer.

Sekisui Chemical Co., Ltd
15F Toranomon 2-chome Tower
2-3-17 Toranomon, Minato-ku
Tokyo 105-8450
Japan
81 3 5521 0558

Facility : Taichung City, Taiwan

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC 4120-05+++	2	Eslon 325K XXX Gray#	ASTM D1784 23447
CPVC 4120-05+++	2	Eslon 325K XXX Orange#	ASTM D1784 23447
CPVC 4120-05+++	2	Eslon 325K XXX Tan#	ASTM D1784 23447
CPVC 4120-05+++	1	Eslon 557K XXX Gray#	ASTM D1784 23448
CPVC 4120-05+++	1	Eslon 557K XXX Orange#	ASTM D1784 23448
CPVC 4120-05+++	1	Eslon 557K XXX Tan#	ASTM D1784 23448
CPVC 4120+++ [1] [G]	2, 4	SP-5800G #	ASTM D1784 23447
# XXX - 000 - 999 +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Fitting and appurtenance End Use. Certified for a maximum surface area to volume ratio of 165 square inches/L. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Rayong, Thailand

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC+++	2, 5	SF-3101G	ASTM D1784 23447
CPVC+++	2, 5	SF-3105G	ASTM D1784 23447
CPVC+++	2, 5	SF-3111C	ASTM D1784 23447
CPVC+++	2, 5	SF-3121C	ASTM D1784 23447
CPVC+++	5, 2	SF-3123C	ASTM D1784 24447
CPVC+++	1	SP-5101G	ASTM D1784 23447
CPVC+++	1	SP-5105G	ASTM D1784 23448
CPVC+++	1	SP-5111C	ASTM D1784 23447
CPVC+++	1	SP-5112C	ASTM D1784 23447
CPVC+++	1	SP-5121C	ASTM D1784 23448
CPVC+++	1	SP-5122C	ASTM D1784 23448
CPVC+++	1	SP-5123C	ASTM D1784 24448
CPVC+++	1	SP-5124C	ASTM D1784 24448
CPVC 4120+++ [1] [G]	2, 4	SP-5800G	ASTM D1784 23447
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Fitting and appurtenance End Use. Certified for a maximum surface area to volume ratio of 165 sq. in./L. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Facility : Sharjah, United Arab Emirates

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC+++	2, 5	SF-3101G	ASTM D1784 23447
CPVC+++	2, 5	SF-3111C	ASTM D1784 23447
CPVC+++	2, 5	SF-3121C	ASTM D1784 23447
CPVC 4120-05+++	1	SP-5101G	ASTM D1784 23447
CPVC 4120-05+++	1	SP-5105G	ASTM D1784 23448
CPVC 4120-05+++	1	SP-5111C	ASTM D1784 23447
CPVC 4120-05+++	1	SP-5112C	ASTM D1784 23447
CPVC 4120-05+++	1	SP-5121C	ASTM D1784 23448
CPVC 4120-05+++	1	SP-5122C	ASTM D1784 23448
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

NOTE: All listed products from this facility are NSF certified, whether or not they bear the
      NSF Mark.

Sekisui Industrial Piping Co., Ltd.
No. 18, Jing 1st Road
Wuqi District
Taichung City 435059
Taiwan
886 4 2630 2689

Facility : Taichung City, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++	CPVC	Eslon Sch 80 CPVC Fittings	ASTM F439
45° Elbow (FT x FT)
1/2" - 4"
45° Elbow (S x FT)
1/2" - 4"
45° Elbow (S x S)
1/2" - 12"
90° Elbow (FT x FT)
1/2" - 4"
90° Elbow (S x FT)
1/2" - 4"
90° Elbow (S x S)
1/2" - 12"
Cap (FT) 1
1/2" - 4"
Cap (S)
1/2" - 12"
Coupling (FT - FT)
1/2" - 4"
Coupling (S x S)
1/2" - 12"
Female Adapter (S x FT)
1/2" - 4"
Male Adapter (MPT x S)
1/2" - 4"
Plug (MPT)
1/2" - 4"
Reducing Bushing (S x S)
1/2" - 12"
Reducing Bushing (Spig x FT)
1/2" - 8"
Reducing Bushing (Spig x S)
1/2" - 12"
Reducing Coupling (S x S)
1/2" - 12"
Reducing Tee (S x S x FT)
3/4" - 12"
Reducing Tee (S x S x S)
1/2" - 12"
Tee (FT x FT x FT)
1/2" - 4"
Tee (S x S x FT)
1/2" - 4"
Tee (S x S x S)
1/2" - 12"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).
Pipe+++	CPVC	Eslon Sch 80 CPVC Pipe	ASTM F441
1/2", 1" - 12" Sch 80
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Shandong Gaoxin Chemical Co., Ltd.
Southwest corner of Lingang Rd and
Liaohe W Second St Int., Green
Chemical Ind. Park, Binhai Eco Dev Zn
Weifang, Shandong,
China
86 536 228 9118
Visit this company's website

Facility : Shandong, China

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC	1	GXWF1	ASTM D1784 23447
CPVC	1	GXWF2	ASTM D1784 23447
CPVC	1	GXWP1	ASTM D1784 23447
CPVC	1	GXWP2	ASTM D1784 23447

Shandong Xiangsheng New Materials Technology Co., Ltd.
Wanggao Industrial Garden, Shouguang
City, Shandong Province, 262700
China
86 532 8503 9257
Visit this company's website

Facility : Shandong, China

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC	2	SunEight XSZ-103 Gray	ASTM D1784 23447
CPVC	2	SunEight XSZ-103 Tan	ASTM D1784 23447

Shie Yu Machine Parts Industrial Co. Ltd
No. 336 - 16 Hai Pin Road
Ching Shui Chen, Taichung
Taiwan
886 4 626 6926

Facility : Kaohsiung, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [G]	CPVC	+DFP+	ASTM F439
45° Ell (Soc x Soc)
1/2" - 12"
90° Ell (Soc x Soc)
1/2" - 12"
Cap (Soc)
1/2" - 12"
Coupling (Soc x Soc)
1/2" - 12"
Cross (Soc x Soc X Soc X Soc)
1/2" - 12"	4" x 4" x 2" x 2" - 12" x 12" x 10" x 10"
Female Adapter (FIPT x Soc)
1/2" - 4"
Male Adapter (MIPT x Soc)
1/2" - 4"
Reducer Bushing (FIPT x Soc)
1/2" x 1/4" - 6" x 4"
Reducer Bushing (Spig X Soc)
3/4" x 1/2" - 14" x 12"
Reducer Coupling (Soc x Soc)
3/4" x 1/2" - 12" x 10"
Reducer Tee (Soc x Soc)
3/4" x 3/4" x 1/2" - 12" x 12" x 10"
Tee (Soc x Soc)
1/2" - 12"
Wye (Soc x Soc x Soc)
1/2" - 12"	4" x 4" x 3" - 12" x 12" x 10"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings+++ [G]	CPVC	S+H	ASTM F439
45° Ell (Soc x Soc)
1/2" - 12"
90° Ell (Soc x Soc)
1/2" - 12"
Cap (Soc)
1/2" - 12"
Coupling (Soc x Soc)
1/2" - 12"
Cross (Soc x Soc X Soc X Soc)
1/2" - 12"	4" x 4" x 2" x 2" - 12" x 12" x 10" x 10"
Female Adapter (FIPT x Soc)
1/2" - 4"
Male Adapter (MIPT x Soc)
1/2" - 4"
Reducer Bushing (FIPT x Soc)
1/2" x 1/4" - 6" x 4"
Reducer Bushing (Spig X Soc)
3/4" x 1/2" - 14" x 12"
Reducer Coupling (Soc x Soc)
3/4" x 1/2" - 12" x 10"
Reducer Tee (Soc x Soc)
3/4" x 3/4" x 1/2" - 12" x 12" x 10"
Tee (Soc x Soc)
1/2" - 12"
Wye (Soc x Soc x Soc)
1/2" - 12"	4" x 4" x 3" - 12" x 12" x 10"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings& +++ [G]	CPVC	+DFP+	ASTM F1970
Van Stone Flange (Soc)
1/2" - 24"
Blind Flange
1/2" - 24"
One-Piece Flange (FIPT)
1/2" - 12"
One-Piece Flange (Soc)
1/2" - 12"
& CPVC unions rated at 150 PSI and 73°F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings& +++ [G]	CPVC	S+H	ASTM F1970
Blind Flange
1/2" - 24"
One-Piece Flange (FIPT)
1/2" - 12"
One-Piece Flange (Soc)
1/2" - 12"
Van Stone Flange (Soc)
1/2" - 24"
& CPVC unions rated at 150 PSI and 73°F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

# CPVC CTS Ball Valves rated at 100 PSI and 180°F.
% PVC Unions 1/2" - 4" rated at 150 PSI and 73°F.
^ CPVC true union ball vale rated at 150 PSI and 73°F

Sibaka Trading Company
P.O. Box 16375
Jeddah 21464
Saudi Arabia
966 12 6278563

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement++ [1] [2]	CPVC	PW, DWV, SW	ZENITH 814 CPVC Heavy Body Cement Orange Low VOC	ASTM F493
Solvent Cement++ [1] [2]	CPVC	PW, DWV, SW	ZENITH 814 CPVC Heavy Body Cement Orange Low VOC	ASTM D2846
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and ZENITH-Clear Primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Sluyter Company Ltd.
375 Steelcase Rd East
Markham, ON L3R 1G3
Canada
800-268-0072
905-475-6011

Facility : Markham, Ontario, Canada

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement ^ [G]	CPVC	PW	CPVC 77 (Clear)	ASTM F493
Solvent Cement ^ [G]	CPVC	PW	CPVC 77 (Grey)	ASTM F493
Solvent Cement ^ [G]	CPVC	PW	CPVC 77 (Orange)	ASTM F493
* Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F ^ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 180 ° F [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

SOVAL Inc.
1851 Long Leaf Boulevard
Lake Wales, FL 33859
United States
305-757-8455
Visit this company's website

Facility : Kaohsiung, Taiwan

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Valves# +++ [G]	CPVC	Soval 562 series	ASTM F1970
CPVC CTS Ball Valve
1/2" - 2"
# CPVC CTS Ball Valves rated at 100 PSI and 180°F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Spears Coastline Plastics, L.L.C.
86334 Coastline Drive
Yulee, FL 32097
United States
904-225-5950

Facility : Yulee, FL

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§ +++ [G]	CPVC 4120	EverTUFF®	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	EverTUFF® Industrial	ASTM F441
1/4" - 24" Sch 80
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	EverTUFF® Industrial	ASTM F441
1/4" - 24" Sch 40
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	KBI	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	KBI	ASTM F441
1/2" - 12" Sch 80
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	KBI	ASTM F441
1/2" - 12" Sch 40
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	KBI	ASTM F442
1/2" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI	ASTM F442
1/2" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI CPVC Hot & Cold Water Blue-Line	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI CPVC Hot & Cold Water Blue-Line	ASTM F442
1/2" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI HydraPro	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI HydraPro	ASTM F442
1/2" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI for JM	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI for JM	ASTM F442
1/2" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	Spears® FlameGuard®	ASTM F442
1/2" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC+++ [G]	1	SP2300	ASTM D1784 24448
CPVC+++ [G]	1	SP2400	ASTM D1784 23447
CPVC+++ [G]	1	SP2500	ASTM D1784 23447
CPVC+++ [G]	1	SP2600	ASTM D1784 23447
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Pulaski, TN

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§ +++ [G]	CPVC 4120	EverTUFF	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	EverTUFF Industrial	ASTM F441
1/4" - 24" Sch 40
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	EverTUFF Industrial	ASTM F441
1/4" - 24" Sch 80
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	KBI	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	KBI	ASTM F441
1/4" - 24" Sch 80
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	KBI	ASTM F441
1/4" - 24" Sch 40
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	KBI	ASTM F442
3/4" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	SCPI	ASTM D2846
1/2" - 2" SDR 11
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	Spears® FlameGuard™	ASTM F442
3/4" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC+++ [G]	1	SP2300	ASTM D1784 24448
CPVC+++ [G]	1	SP2400	ASTM D1784 23447
CPVC+++ [G]	1	SP2500	ASTM D1784 23447
CPVC+++ [G]	1	SP2600	ASTM D1784 23447
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Spears Manufacturing
15853 Olden Street
P.O. Box 9203
Sylmar, CA 91392
United States
818-364-6766
Visit this company's website

Facility : Pulaski, TN

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC+++	1	SP2400	ASTM D1784 23447
CPVC¢ +++	1	SP2400	CSA B137.6 23447
CPVC+++	1	SP2500	ASTM D1784 23447
CPVC¢ +++	1	SP2500	CSA B137.6 23447
CPVC+++	1	SP2600	ASTM D1784 23447
CPVC¢ +++	1	SP2600	CSA B137.6 23447
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Spears Manufacturing Company
15853 Olden Street
P.O. Box 9203
Sylmar, CA 91342
United States
818-364-1611
Visit this company's website

Facility : Santa Paula, CA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings +++ [1] [G]*	CPVC	SPEARS	ASTM F437
45° Ell
819-xxx
90° Ell
808-xxx
Bushing
839-xxx
Cap
848-xxx
Coupling
830-xxx
Plug
850-xxx
Tee
805-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings +++ [1] [G]*	CPVC	SPEARS	ASTM F439
22 1/2° Ell
4216-xxx	816-xxx
22 1/2° Street Elbow
4242-xxx	842-xxx
30° Ell
815-xxx
45° Ell
4217-xxx	817-xxx	819-xxx
45° Street Elbow
827-xxx
90° Ell
4206-xxx	4209-xxx	806-xxx	807-xxx
808-xxx	809-xxx
Adapter
835-xxx	836-xxx
Bushing
839-xxx
Cap
4247-xxx	847-xxx	848-xxx
Coupling
4229-xxx	829-xxx	830-xxx
Cross
4220-xxx	820-xxx
Plug
849-xxx	850-xxx
Street Tee
4244-xxx	844-xxx
Tee
4201-xxx	801-xxx	802-xxx	805-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings§ +++ [1] [G]	CPVC	SPEARS/ KBI	ASTM D2846
45° Ell (S x S)
1/2" - 2" (4117-xxx)	1/2" - 2" (R) CW-xxx-S
45° Street Ell (SxS)
1/2" - 2" (4127-xxx)	1/2" - 2" (R) CS-xxxx-S
90° Ell (S x S)
1/2" - 2" (4106-xxx)	1/2" - 2" (R) CE-xxxx-S
90° Street Ell (S x FIPT)
1/2" - 2" (4109-xxx)	1/2" - 2" (R) CL-xxxx-S
CPVC Drop Ell
1/2" (R) CD-0500-S
Cap (S)
1/2" - 2" (4147-xxx)	1/2" - 2" (R) CP-xxxx-S
Coupling (S x S)
1/2" - 2" (4129-xxx)	1/2" - 2" (R) CC-xxxx-S
Male Adapter (S x MIPT)
1/2" - 2" (4136-xxx)	1/2" - 2" (R) CM-xxxx-S
Reducer Bushing (Spg x S)
1/2" - 2" (4137-xxx)	1/2" - 2" (R) CB-xx-S
Tee & Reducer Tee (S x S x S)
1/2" - 2" (4101-xxx)	1/2" - 2" (R) CR-xxx-S	1/2" - 2" (R) CT-xxxx-S
Transition Bushing (IPS x CTS)
1/2" - 2" (4140-xxx)	1/2" - 2" (R) CX-xxxx-S
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Transition Fittings+++ [1] [G]	CPVC	SPEARS / KBI	ASTM D2846
Drop Ear Elbow 1/2" Hub x 1/2" FPT
DE-0500
Drop Ear Ell 1/2" CTS x 1/2" FPT
DE-0500-S
Transition Adapter CTS x FIPT
1/2" - 2" (TFS-xxxx)
Transition Adapter CTS x MIPT
1/2" - 2" (TMS-xxxx)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings +++ [1] [G]*	CPVC	SPEARS MANUFACTURING CO.	ASTM F438
22 1/2° Ell
816-xxx
22 1/2° Street Elbow
4242-xxx	842-xxx
45° Ell
417-xxx	4217-xxx
90° Ell
406-xxx	409-xxx	4206-xxx	4209-xxx
Cap
4247-xxx	447-xxx
Coupling
4229-xxx	429-xxx
Cross
4220-xxx
Street Tee
4244-xxx	844-xxx
Tee
401-xxx	4201-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Sylmar, CA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings +++ [1] [G]*	CPVC	SPEARS	ASTM F437
45° Ell
819-xxx
90° Ell
808-xxx
Bushing
839-xxx
Cap
848-xxx
Coupling
830-xxx
Plug
850-xxx
Tee
805-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings +++ [1] [G]*	CPVC	SPEARS	ASTM F439
22 1/2° Ell
4216-xxx	816-xxx
22 1/2° Street Elbow
4242-xxx	842-xxx
30° Ell
815-xxx
45° Ell
4217-xxx	817-xxx	819-xxx
45° Street Elbow
827-xxx
90° Ell
4206-xxx	4209-xxx	806-xxx	807-xxx
808-xxx	809-xxx
90º Street Ell
812-XXX-C
Adapter
835-xxx	836-xxx
Bushing
839-xxx
Cap
4247-xxx	847-xxx	848-xxx
Coupling
4229-xxx	829-xxx	830-xxx
Cross
4220-xxx	820-xxx
Plug
849-xxx	850-xxx
Street Tee
4244-xxx	844-xxx
Tee
4201-xxx	801-xxx	802-xxx	805-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings +++ [1] [G]*	CPVC	SPEARS MANUFACTURING CO.	ASTM F438
22 1/2° Ell
816-xxx
22 1/2° Street Elbow
4242-xxx	842-xxx
45° Ell
417-xxx	4217-xxx
90° Ell
406-xxx	409-xxx	4206-xxx	4209-xxx
Cap
4247-xxx	447-xxx
Coupling
4229-xxx	429-xxx
Cross
4220-xxx
Street Tee
4244-xxx	844-xxx
Tee
401-xxx	4201-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings§ +++ [1] [G]	CPVC	SPEARS/KBI	ASTM D2846
45° Ell (S x S)
1/2" - 2" (4117-xxx)	1/2" - 2" (R) CW-xxx-S
45° Street Ell (S x S)
1/2" - 2" (R) CS-xxxx-S
45° Street Ell (Spg x Soc)
1/2" - 2" (4127-xxx)
90° Ell (S x S)
1/2" - 2" (4106-xxx)	1/2" - 2" (R) CE-xxxx-S
90° Street Ell (S x FIPT)
1/2" - 2" (4109-xxx)	1/2" - 2" (R) CL-xxxx-S
Cap (S)
1/2" - 2" (R) CP-xxxx-S
Cap (Socket)
1/2" - 2" (4147-xxx)
Coupling (S x S)
1/2" - 2" (4129-xxx)	1/2" - 2" (R) CC-xxxx-S
Male Adapter (S x MIPT)
1/2" - 2" (R) CM-xxx-S
Male Adapter (Soc x MIPT)
1/2" - 2" (4136-xxx)
Reducer Bushing (Spg x S)
1/2" - 2" (R) CB-xx-S
Reducer Bushing (Spg x Soc)
1/2" - 2" (4137-xxx)
Tee & Reducer Tee(S x S x S)
1/2" - 2" (R) CR-xxx-S	1/2" - 2" (R) CT-xxxx-S
Tee (S x S x S)
1/2" - 2" (4101-xxx)
Transition Bushing (IPS x CTS)
1/2" - 2" (4140-xxx)	1/2" - 2" (R) CX-xxxx-S
Transition Coupling (IPS x CTS)
1/2" - 2" (4141-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

[2] Reinforced

Facility : Yulee, FL

Corrosive Waste - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# § Þ [1] [2]	CPVC	Spears® LabWaste™ CPVC Corrosive Waste Pipe	ASTM F2618
1 1/2" - 12"
# Product may be marked with an alternate trade designation, OceanTUFF™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. [1] Chemical resistance evaluation includes change of apparent tensile strength evaluation within ±10% and change in weight of ±2% after chemical exposure for 7 days. [2] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.
Pipe# § Þ [1] [2]	CPVC	Spears® LabWaste™ CPVC Corrosive Waste Pipe	IGC 210
1 1/2" - 12"
# Product may be marked with an alternate trade designation, OceanTUFF™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. [1] Chemical resistance evaluation includes change of apparent tensile strength evaluation within ±10% and change in weight of ±2% after chemical exposure for 7 days. [2] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# ¢ [1]	CPVC	Spears® LabWaste™ CPVC Corrosive Waste Pipe	CSA B181.2
1 1/2" - 12"
# Product may be marked with an alternate trade designation, OceanTUFF™. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.

Facility : Jerome, ID

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings +++ [G]*	CPVC	SPEARS	ASTM F437
45° Ell
819-xxx
90° Ell
808-xxx
Bushing
839-xxx
Cap
848-xxx
Coupling
830-xxx
Plug
850-xxx
Tee
805-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings +++ [G]*	CPVC	SPEARS	ASTM F439
22 1/2° Ell
4216-xxx	816-xxx
22 1/2° Street Elbow
4242-xxx	842-xxx
30° Ell
815-xxx
45° Ell
4217-xxx	817-xxx	819-xxx
45° Street Tee
827-xxx
90° Ell
4206-xxx	4209-xxx	806-xxx	807-xxx
808-xxx	809-xxx
90º Street Ell
812-XXX-C
Adapter
835-xxx	836-xxx
Bushing
839-xxx
Cap
4247-xxx	847-xxx	848-xxx
Coupling
4229-xxx	829-xxx	830-xxx
Plug
4249-xxx	849-xxx	850-xxx
Street Tee
4244-xxx	844-xxx
Tee
4201-xxx	801-xxx	802-xxx	805-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: xxx - different size code designation

Facility : Caney, KS

Corrosive Waste - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# § Þ [1] [2] [3]	CPVC	Spears LabWaste™	ASTM F2618
1/16 Bend
P324-xxxC
1/16 Bend, Street
P326-xxxC
1/4 Bend
P300-xxxC
1/4 Bend w/ Low Heel Inlet
P303-xxxC
1/4 Bend, Long Sweep
P304-xxxC
1/4 Bend, Street
P302-xxxC
1/4 Bend, Street Long Sweep
P309-xxxC
1/4 Bend, Street w/low heel inlet
P306-xxxC
1/6 Bend
P319-xxxC
1/6 Bend, Street
P320-xxxC
1/8 Bend
P321-xxxC
1/8 Bend, Street
P323-xxxC
2-Way Cleanout
P448-xxxC
45° Wye
P600-xxxC
45° Wye, Reducing
P601-xxxC
Cap
P116-xxxC
Cleanout Adapter
P105-xxxC
Cleanout Adapter w/ Plug
P105X-xxxC
Cleanout Plug
P106-xxxC
Cleanout Tee w/ Plug
P444X-xxxC
Combination Wye & 1/8 Bend
P501-xxxC
Combination Wye & 1/8 Bend (2-piece)
P503-xxxC
Combination Wye & 1/8 Bend, Reducing
P502-xxxC
Combination Wye & 1/8 Bend, Reducing (2-piece)
P504-xxxC
Countersunk Plug
P110-xxxC
Coupling
P100-xxxC
Double 1/4 Bend
P327-xxxC
Double Combination Wye & 1/8 Bend
P507-xxxC
Double Fixture Fitting
P500-xxxC
Double Sanitary Tee
P428-xxxC
Double Sanitary Tee, Reducing
P429-xxxC
Double Wye
P611-xxxC
Double Wye, Reducing
P612-xxxC
Duriron Transition Fittings
P095-xxxC	P097-xxxC
Female Adapter
P101-xxxC
Flange
P854-xxxC
Flush Bushing
P107-xxxC
Flush Cleanout Tee
P445-xxxC
Flush Cleanout Tee w/ Plug
P445X-xxxC
Glass Transition Fittings
P098-xxxC
Grooved Couplings
P096-xxxC
Hub Adapter
P123-xxxC
Increaser Reducer
P102-xxxC
L.A. Pattern P-Trap w/ Union Nut
P711P-xxxC
Male Adapter
P109-xxxC
No-Hub Adapter
P119-xxxC
P-Trap
P706X-xxxC
P-Trap w/ Union Nut
P-708P-xxxC
Reducing Sanitary Tee, Street
P404-xxxC
Repair Coupling
P130-xxxC
Return Bend
P700-xxxC
Running Trap
P705R-xxxC
Sanitary Tee
P400-xxxC
Sanitary Tee, Reducing
P401-xxxC
Sanitary Tee, Street
P403-xxxC
Tailpiece Adapter w/ Nut
P704P-xxxC
Transition Coupling
P099-xxxC
Trap Adapter - Female w/ Chrome Nut & Washer
P104X-xxxC
Trap Adapter - Female w/ Plastic Nut & Washer
P104R-xxxC
Trap Adapter w/ Nut
P103P-xxxC
Vent Ell
P331-xxxC
Vent Ell, Street
P333-xxxC
Vent Tee
P441-xxxC
Wye, Street
P602-xxxC
# Product may be marked with an alternate trade designation, OceanTUFF™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. [1] Chemical resistance evaluation includes change of apparent tensile strength evaluation within ±10% and change in weight of ±2% after chemical exposure for 7 days. [2] xxx = different size code designation [3] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.
Fittings# [1] [2] [3]	CPVC	Spears LabWaste™	ASTM F2618
1/4 Bend w/ Side InletÞ
P300s-xxxC
Drum TrapÞ
P720-xxxC
Jar TrapÞ
P712-xxxC
Jar Trap w/ Tail Piece AdapterÞ
P712P-xxxC
P-Trap w/ CleanoutÞ
P707X-xxxC
S-Trap
P705-xxxC
Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. # Product may be marked with an alternate trade designation, OceanTUFF™. [1] Chemical resistance evaluation includes change of apparent tensile strength evaluation within ±10% and change in weight of ±2% after chemical exposure for 7 days. [2] xxx = different size code designation [3] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.
Pipe# § Þ [1] [3]	CPVC	Spears LabWaste™	ASTM F2618
1 1/2" - 12"
# Product may be marked with an alternate trade designation, OceanTUFF™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. [1] Chemical resistance evaluation includes change of apparent tensile strength evaluation within ±10% and change in weight of ±2% after chemical exposure for 7 days. [3] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# ¢ [1] [2]	CPVC	Spears LabWaste™	CSA B181.2
1/16 Bend
P324-xxxC
1/16 Bend, Street
P326-xxxC
1/4 Bend
P300-xxxC
1/4 Bend w/ Low Heel Inlet
P303-xxxC
1/4 Bend w/ Side Inlet
P300s-xxxC
1/4 Bend, Long Sweep
P304-xxxC
1/4 Bend, Street
P302-xxxC
1/4 Bend, Street Long Sweep
P309-xxxC
1/4 Bend, Street w/low heel inlet
P306-xxxC
1/4 Bend, Street w/low heel inlet
P306-xxxC
1/6 Bend
P319-xxxC
1/6 Bend, Street
P320-xxxC
1/8 Bend
P321-xxxC
1/8 Bend, Street
P323-xxxC
2-Way Cleanout
P448-xxxC
45° Wye
P600-xxxC
45° Wye, Reducing
P601-xxxC
Cap
P116-xxxC
Cleanout Adapter
P105-xxxC
Cleanout Adapter w/ Plug
P105X-xxxC
Cleanout Plug
P106-xxxC
Cleanout Tee w/ Plug
P444X-xxxC
Combination Wye & 1/8 Bend
P501-xxxC
Combination Wye & 1/8 Bend (2-piece)
P503-xxxC
Combination Wye & 1/8 Bend, Reducing
P502-xxxC
Combination Wye & 1/8 Bend, Reducing (2-piece)
P504-xxxC
Countersunk Plug
P110-xxxC
Coupling
P100-xxxC
Double 1/4 Bend
P327-xxxC
Double Combination Wye & 1/8 Bend
P507-xxxC
Double Fixture Fitting
P500-xxxC
Double Sanitary Tee
P428-xxxC
Double Sanitary Tee, Reducing
P429-xxxC
Double Wye
P611-xxxC
Double Wye, Reducing
P612-xxxC
Drum Trap
P720-xxxC
Duriron Transition Fittings
P095-xxxC	P097-xxxC
Female Adapter
P101-xxxC
Flange
P854-xxxC
Flush Bushing
P107-xxxC
Flush Cleanout Tee
P445-xxxC
Flush Cleanout Tee w/ Plug
P445X-xxxC
Glass Transition Fittings
P098-xxxC
Grooved Couplings
P096-xxxC
Hub Adapter
P123-xxxC
Increaser Reducer
P102-xxxC
Jar Trap
P712-xxxC
Jar Trap w/ Tail Piece AdapterÞ
P712P-xxxC
L.A. Pattern P-Trap w/ Union Nut
P711P-xxxC
Male Adapter
P109-xxxC
No-Hub Adapter
P119-xxxC
P-Trap
P706X-xxxC
P-Trap w/ Cleanout
P707X-xxxC
P-Trap w/ Union Nut
P-708P-xxxC
Reducing Sanitary Tee, Street
P404-xxxC
Repair Coupling
P130-xxxC
Return Bend
P700-xxxC
Running Trap
P705R-xxxC
S-Trap
P705-xxxC
Sanitary Tee
P400-xxxC
Sanitary Tee, Reducing
P401-xxxC
Sanitary Tee, Street
P403-xxxC
Tailpiece Adapter w/ Nut
P704P-xxxC
Transition Coupling
P099-xxxC
Trap Adapter - Female w/ Chrome Nut & Washer
P104X-xxxC
Trap Adapter - Female w/ Plastic Nut & Washer
P104R-xxxC
Trap Adapter w/ Nut
P103P-xxxC
Vent Ell
P331-xxxC
Vent Ell, Street
P333-xxxC
Vent Tee
P441-xxxC
Wye, Street
P602-xxxC
# Product may be marked with an alternate trade designation, OceanTUFF™. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] xxx = different size code designation [2] Spears LabWaste™ CPVC Drain Waste and Vent System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.
Pipe# ¢ [2]	CPVC	Spears LabWaste™	CSA B181.2
1 1/2" - 12"
# Product may be marked with an alternate trade designation, OceanTUFF™. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [2] Spears LabWaste™ CPVC Drain Waste and Vent System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings +++ [1] [G]*	CPVC	SPEARS	ASTM F439
22 1/2° Ell
4216-xxx	816-xxx
22 1/2° Street Elbow
4242-xxx	842-xxx
45° Ell
4217-xxx	817-xxx	819-xxx
45° Street Elbow
827-xxx
90° Ell
4206-xxx	4209-xxx	806-xxx	809-xxx
90º Street Ell
812-XXX-C
Adapter
835-xxx	836-xxx
Bushing
4238-xxx	839-xxx
Cap
4247-xxx	847-xxx	848-xxx
Coupling
4229-xxx	829-xxx
Cross
4220-xxx	820-xxx
Plug
850-xxx
Street Tee
4244-xxx	844-xxx
Tee
4201-xxx	801-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings +++ [1] [G]*	CPVC	SPEARS	ASTM F437
45° Ell
819-xxx
Bushing
839-xxx
Cap
848-XXX
Plug
850-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings +++ [1] [G]*	CPVC	SPEARS MANUFACTURING CO.	ASTM F438
22 1/2° Ell
816-xxx
22 1/2° Street Elbow
4242-xxx	842-xxx
45° Ell
417-xxx	4217-xxx
90° Ell
406-xxx	409-xxx	4206-xxx	4209-xxx
Cap
4247-xxx	447-xxx
Coupling
4229-xxx	429-xxx
Cross
4220-xxx
Street Tee
4244-xxx	844-xxx
Tee
401-xxx	4201-xxx
* Part number engraved on the fitting may or may not be followed by a "C". +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings§ +++ [1] [G]	CPVC	SPEARS/KBI	ASTM D2846
45° Ell (S x S)
1/2" - 2" (R) CW-xxx-S
45° Ell (soc x soc)
1/2" - 2" (4117-xxx)
45° Street Ell (S x S)
1/2" - 2" (R) CS-xxxx-S
45° Street Ell (spg x soc)
1/2" - 2" (4127-xxx)
90° Ell (S x S)
1/2" - 2" (R) CE-xxxx-S
90° Ell (soc x soc)
1/2" - 2" (4106-xxx)
90° Street Ell (S x FIPT)
1/2" - 2" (R) CL-xxxx-S
90° Street Ell (spg x soc)
1/2" - 2" (4109-xxx)
Cap (S)
1/2" - 2" (R) CP-xxxx-S
Cap (soc)
1/2" - 2" (4147-xxx)
Coupling (S x S)
1/2" - 2" (R) CC-xxxx-S
Coupling (soc x soc)
1/2" - 2" (4129-xxx)
Male Adapter (S x MIPT)
1/2" - 2" (R) CM-xxx-S
Male Adapter (soc x MIPT)
1/2" - 2" (4136-xxx)
Reducer Bushing (Spg x S)
1/2" - 2" (R) CB-xx-S
Reducer Bushing (spg x soc)
1/2" - 2" (4137-xxx)
Tee & Reducer Tee (S x S x S)
1/2" - 2" (R) CR-xxx-S	1/2" - 2" (R) CT-xxxx-S
Tee (soc x soc x soc)
1/2" - 2" (4101-xxx)
Transition Bushing (IPS x CTS)
1/2" - 2" (4140-xxx)	1/2" - 2" (R) CX-xxxx-S
Transition Coupling (IPS x CTS)
1/2" - 2" (4141-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings§ +++ [1] [G]	CPVC	SPEARS/KBI	CSA B137.6
45° Ell (S x S)
1/2" - 2" (R) CW-xxx-S
45° Ell (soc x soc)
1/2" - 2" (4117-xxx)
45° Street Ell (S x S)
1/2" - 2" (R) CS-xxxx-S
45° Street Ell (spg x soc)
1/2" - 2" (4127-xxx)
90° Ell (S x S)
1/2" - 2" (R) CE-xxxx-S
90° Ell (soc x soc)
1/2" - 2" (4106-xxx)
90° Street Ell (S x FIPT)
1/2" - 2" (R) CL-xxxx-S
90° Street Ell (spg x soc)
1/2" - 2" (4109-xxx)
Cap (S)
1/2" - 2" (R) CP-xxxx-S
Cap (soc)
1/2" - 2" (4147-xxx)
Coupling (S x S)
1/2" - 2" (R) CC-xxxx-S
Coupling (soc x soc)
1/2" - 2" (4129-xxx)
Male Adapter (S x MIPT)
1/2" - 2" (R) CM-xxx-S
Male Adapter (soc x MIPT)
1/2" - 2" (4136-xxx)
Reducer Bushing (Spg x S)
1/2" - 2" (R) CB-xx-S
Reducer Bushing (spg x soc)
1/2" - 2" (4137-xxx)
Tee & Reducer Tee (S x S x S)
1/2" - 2" (R) CR-xxx-S	1/2" - 2" (R) CT-xxxx-S
Tee (soc x soc x soc)
1/2" - 2" (4101-xxx)
Transition Bushing (IPS x CTS)
1/2" - 2" (4140-xxx)	1/2" - 2" (R) CX-xxxx-S
Transition Coupling (IPS x CTS)
1/2" - 2" (4141-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxxx, xxx, xx - different size code designation [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe§ +++ [G]	CPVC 4120	Spears® FlameGuard™	ASTM F442
3/4" - 3" SDR 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Pulaski, TN

Corrosive Waste - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# § Þ [1] [2]	CPVC	Spears® LabWaste™ CPVC Corrosive Waste Pipe	ASTM F2618
1 1/2" - 12"
# Product may be marked with an alternate trade designation, OceanTUFF™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. [1] Chemical resistance evaluation includes change of apparent tensile strength evaluation within ±10% and change in weight of ±2% after chemical exposure for 7 days. [2] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.
Pipe# § Þ [1] [2]	CPVC	Spears® LabWaste™ CPVC Corrosive Waste Pipe	IGC 210
1 1/2" - 12"
# Product may be marked with an alternate trade designation, OceanTUFF™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Þ Product is Certified to the International Plumbing Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Plumbing Code. [1] Chemical resistance evaluation includes change of apparent tensile strength evaluation within ±10% and change in weight of ±2% after chemical exposure for 7 days. [2] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# ¢ [1]	CPVC	Spears® LabWaste™ CPVC Corrosive Waste Pipe	CSA B181.2
1 1/2" - 12"
# Product may be marked with an alternate trade designation, OceanTUFF™. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Spears LabWaste™ CPVC Corrosive Waste Drainage System consists of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and Low VOC Yellow One-Step LW-5 CPVC Solvent Cement.

Spears Manufacturing Company
15853 Olden Street
P.O. Box 9203
Sylmar, CA 91342
United States
818-364-1611
Visit this company's website

Facility : # 2 Caney, KS

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Spears EverTUFF CTS-5 One-Step Medium Body Low VOC Yellow CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Spears EverTUFF CTS-5 One-Step Medium Body Low VOC Yellow CPVC Cement	ASTM D2846
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	Spears EverTUFF CTS-5 One-Step Medium Body Low VOC Yellow CPVC Cement	CSA B137.6
Solvent Cement¢ § +++ [2] [G]	CPVC	DWV, SW	Spears EverTUFF CTS-5 One-Step Medium Body Low VOC Yellow CPVC Cement	CSA B181.2
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Spears FS-5 One Step FlameGuard™ Low VOC Red CPVC for Fire Sprinkler	ASTM F493
Solvent Cement¢ § +++ [2] [G]	CPVC	PW, DWV, SW	Spears FS-5 One Step FlameGuard™ Low VOC Red CPVCfor Fire Sprinkler	CSA B137.6
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Spears LW-5 One Step Low VOC Mustard CPVC Cement for Lab Waste™	ASTM F493
Solvent Cement§ +++ [2] [3] [G]	CPVC	CW	Spears LW-5 One Step Low VOC Mustard CPVC Cement for Lab Waste™	ASTM F2618
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Spears CPVC-24 Low VOC Gray Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Spears CPVC-24 Low VOC Orange Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Spears MARINE-24 Low VOC Gray Heavy Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Spears OT-5 One Step Low VOC Mustard CPV Cement for OceanTUFF™	ASTM F493
Solvent Cement§ +++ [2] [4] [G]	CPVC	CW	Spears OT-5 One Step Low VOC Mustard CPVC Cement for OceanTUFF™	ASTM F2618
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This primer may be used with any Certified Spears PVC or CPVC solvent cement. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] Spears LW-5 One Step Low VOC Mustard CPVC Cement for Lab WasteTM is Certified for corrosive waste applications as part of the Spears LabWaste™ CPVC Corrosive Waste Drainage System, consisting of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC Fittings, and LW-5 One Step Low VOC Mustard CPVC Cement for Lab Waste™. [4] Spears OT-5 One step low VOC Mustard CPVC Cement for OceanTUFF™ is Certified for corrosive waste applications as part of the Spears OceanTUFF™ CPVC Corrosive Waste Drainage System, consisting of Spears OceanTUFF™ CPVC Pipe,OceanTUFF™ fittings and OT-5 One Step Low VOC Mustard CPVC Cement for OceanTUFF™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Sunbelt Marketing Inc.
7400 Sunbelt Drive SE
Austell, GA 30168
United States
877-813-2333

Facility : Huangyan, Taizhou, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings	CPVC	ERA	ASTM D2846
45° Elbow
1/2" HPBL470612	3/4" HPBL470634	1" HPBL47061	1-1/4" HPBL4706114
1-1/2" HPBL4706112	2" HPBL47062
90° Elbow
1/2" HPBL470712	3/4" HPBL470734	1" HPBL47071	1-1/4" HPBL4707114
1-1/2" HPBL4707112	2" HPBL47072
90° Elbow with Bracket
1/2" HPBL4707512
End Cap
1/2" HPBL471712	3/4" HPBL471734	1" HPBL47171	1-1/4" HPBL4717114
1-1/2" HPBL4717112	2" HPBL47172
Female Adaptor
1/2" HPBL470312	3/4" HPBL470334	1" HPBL47031	1-1/4" HPBL4703114
1-1/2" HPBL4703112	2" HPBL47032
Female Elbow with Bracket
1/2" HPBL47073512
Male Adaptor
1/2" HPBL470412	3/4" HPBL470434	1" HPBL47041	1-1/4" HPBL4704114
1-1/2" HPBL4704112	2" HPBL47042
Male and Female Elbow CPVC+++
1/2" HPBL4707212
Reducing Bush
3/4" x 1/2" HPBL47183412	1" x 1/2" HPBL4718112	1" x 3/4" HPBL4718134	1-1/4" x 1/2" HPBL471811412
1-1/4" x 3/4" HPBL471811434	1-1/4" x 1" HPBL47181141	1-1/2" x 1/2" HPBL471811212	1-1/2" x 1" HPBL47181121
1-1/2" x 1-1/4" HPBL4718112114	2" x 1/2" HPBL4718212	2" x 3/4" HPBL4718234	2" x 1" HPBL471821
2" x 1 1/4" HPBL47182114	2" x 1 1/2" HPBL47182112
Reducing Elbow
3/4" x 1/2" HPBL4707R3412
Reducing Male Adaptor
3/4" x 1/2" HPBL4704R3412
Reducing Socket
3/4" x 1/2" HPBL4701R3412	1" x 1/2" HPBL4701R112	1" x 3/4" HPBL4701R134
Reducing Tee
3/4" x 1/2" HPBL4711R343412	1" x 1/2" HPBL4711R1112	1" x 3/4" HPBL4711R1134	1-1/4" x 1/2" HPBL4711R11411412
1-1/4" x 3/4" HPBL4711R11411434	1-1/4" x 1" HPBL4711R1141141	1-1/2" x 1/2" HPBL4711R11211212	1-1/2" x 3/4" HPBL4711R11211234
1-1/2" x 1" HPBL4711R1121121	1-1/2" x 1-1/4" HPBL4711R112112114	2" x 1/2" HPBL4711R2212	2" x 3/4" HPBL4711R2234
2" x 1" HPBL4711R221	2" x 1 1/4" HPBL4711R22114	2" x 1 1/2" HPBL4711R22112
Socket
1/2" HPBL470112	3/4" HPBL470134	1" HPBL47011	1-1/4" HPBL4701114
1-1/2" HPBL4701112	2" HPBL47012
Straight Tee
1/2" HPBL471112	3/4" HPBL471134	1" HPBL47111	1-1/4" HPBL4711114
1-1/2" HPBL4711112	2" HPBL47112
Transition Bush+++
1/2" HPBL4718T12	3/4" HPBL4718T34	1" HPBL4718T1	1-1/4" HPBL4718T114
1-1/2" HPBL4718T112	2" HPBL4718T2
Union
1/2" HPBL4701T12	3/4" HPBL4701T34	1" HPBL4701T12
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Sunbelt Marketing Investment Corporation
7400 Sunbelt Drive
Austell, GA 30168
United States
800-257-5566
770-739-3740
Visit this company's website

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [G]	CPVC 4120	HYDROPRO BLUE	ASTM D2846
1/2" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+++ [G]	CPVC 4120	HYDROPRO	ASTM D2846
1/4" - 2" SDR 11
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

SuperSerrot S.A. de C.V.
Ave. Vicente Guerrero No.2929
Monterrey, Nuevo Léon 64500
Mexico
52 818 331 3330
Visit this company's website

Facility : Monterrey, GA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Serrot CPVC 1148 Yellow Medium Body	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Serrot CPVC 1106HB Gray Heavy Body	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and an NSF® Certified Arrow Adhesives Company primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

T. Christy Enterprises, Inc.
655 East Ball Road
Anaheim, CA 92805
United States
800-258-4583
714-507-3300
Visit this company's website

Facility : # 3 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Christy's Orange Medium Body CPVC Cement	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Christy's Orange Medium Body CPVC Cement	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Christy's Orange Medium Body CPVC Cement	ASTM D2846
Solvent Cement+++	CPVC	PW, DWV, SW	Christy’s Yellow One-Step CPVC	ASTM D2846
Solvent Cement+++	CPVC	PW, DWV, SW	Christy’s Yellow One-Step CPVC	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	E-Z Weld 207 Low VOC Cemento Para CPVC Mediano Naranja	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	E-Z Weld 207 Low VOC Orange Medium Body CPVC Cement	ASTM D2846
Solvent Cement* + § [1] [2] [G]	CPVC	PW, DWV, SW	E-Z Weld 207xx CPVC Orange	ASTM F493
Solvent Cement* + § [1] [2] [G]	CPVC	PW, DWV, SW	E-Z Weld 207xx LOW VOC Medium Bodied CPVC Cement (Orange)	ASTM F493
Solvent Cement* + § [1] [2] [G]	CPVC	PW, DWV, SW	E-Z Weld 207xx Orange CPVC Cement	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 217 Low VOC Gray Heavy Body CPVC Cement	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 217 Low VOC Gray Heavy Body CPVC Cement	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 217xx CPVC Cement Gray	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 217xx CPVC Cement Gray	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 217xx LOW VOC Heavy Body CPVC Gray	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 217xx LOW VOC Heavy Body CPVC Gray	ASTM F493
Solvent Cement§ +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 227 Flowguard Gold Medium Body Yellow CPVC Cement	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 786 Low VOC Orange Heavy Body CPVC Cement	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, SWV, SW	E-Z Weld 786 Low VOC Orange Heavy Body CPVC Cement	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 786 for CPVC	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 786 for CPVC	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 786xx Heavy Bodied Orange for CPVC	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 786xx Heavy Bodied Orange for CPVC	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 786xx Low VOC CPVC Cement	ASTM D2846
Solvent Cement! § [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld 786xx Low VOC CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [3] [G]	CPVC	PW, DWV, SW	E-Z Weld Enviro 227 One-Step Flowguard Gold Medium Body CPVC Cement	ASTM F493
Solvent Cement§ +++ [2] [3] [G]	CPVC	PW, DWV, SW	Flotek One-Step CPVC Cement Medium Body Yellow	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Thermoguard MPF 914 Low VOC Orange Heavy Body CPVC Cement	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Thermoguard MPF 914 Low VOC Orange Heavy Body CPVC Cement	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	WELD-ON FLOWGUARD 714 CPVC CEMENT ORANGE HEAVY BODIED	ASTM D2846
Solvent Cement¢ § ** +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Ultra Low VOC CPVC	CSA B137.6
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Ultra-Low VOC CPVC	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 3563 Yellow Ultra-Low VOC CPVC	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 714 Gray Low-VOC CPVC	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 714 Gray Low-VOC CPVC	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange Low-VOC CPVC	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange Low-VOC CPVC	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Low-VOC CPVC	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Low-VOC CPVC	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Ultra Low VOC CPVC	ASTM D2846
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 714 Orange/Gray Ultra Low VOC CPVC	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 724 Orange/Gray Heavy Bodied Ultra Low VOC CPVC Cement	ASTM F493
Solvent Cement! § +++ [2] [3] [G]	CPVC	PW, DWV, SW	Weld-On 724 Orange/Gray Heavy Bodied Ultra Low VOC CPVC Cement	ASTM D2564
! Product is Certified whether or not it bears the U.P. Code Mark. * xx - Package size: 01, 02, 03, 04 and 05 indicate 1/4 pint, 1/2 pint, pint, quart and gallon respectively. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Cements Certified to CSA B181.1 must be yellow in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assemblies using the cement and one of the following primers: Christy's® Purple Primer Low Ultra VOC, Christy's® Red Hot Clear® Low VOC, Christy's® Red Hot Purple Primer Low Ultra VOC, or Weld On® P-68 Clear or Purple, P-70® Clear or Purple. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings assembled using the cement with primer. [4] This is a one-step solvent cement and is not intended for use with a primer. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Taizhou G-Good Adhesives Co., Ltd. DBA Linhai Gysi Adhesives Co. Ltd.
Shiniu Cun, Yanjiang Zhen
Linhai Shi, Zhejiang
China
86 576 8569 6612

Facility : Zhejiang, China

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	BAILEY 230 Low VOC CPVC Orange Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	BAILEY 230 Low VOC CPVC Yellow Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	BAILEY 260 Low VOC CPVC Grey Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	BAILEY 261 Low VOC CPVC Orange Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	BAILEY 262 Low VOC CPVC Red Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	BAILEY Low VOC CPVC 8125 Grey Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	BAILEY Low VOC CPVC 8213 Yellow Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	BAILEY Low VOC CPVC 8213 Yellow Medium Bodied Plastic Pipe Cement	CSA B137.6
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	BAILEY Low VOC CPVC 8613 Orange Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	BAILEY Low VOC CPVC 8635 Orange Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	BAILEY Low VOC CPVC 9611 Red Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	ERA Low VOC CPVC 8125 Grey Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	ERA Low VOC CPVC 8213 Yellow Medium Bodied Plastic Pipe Cement	CSA B137.6
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	ERA Low VOC CPVC 8213 Yellow Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	ERA Low VOC CPVC 8613 Orange Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	ERA Low VOC CPVC 8635 Orange Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	G-GOOD Low VOC CPVC 8125 Grey Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	G-GOOD Low VOC CPVC 8213 Yellow Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	G-GOOD Low VOC CPVC 8213 Yellow Medium Bodied Plastic Pipe Cement	CSA B137.6
Solvent Cement§ +++ [1] [2] [3]	CPVC	PW, DWV, SW	G-GOOD Low VOC CPVC 8613 Orange Medium Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	G-GOOD Low VOC CPVC 8635 Orange Heavy Bodied Plastic Pipe Cement	ASTM F493
Solvent Cement§ +++ [1] [2]	CPVC	PW, DWV, SW	G-GOOD Low VOC CPVC 9611 Red Heavy Bodied Plastic Pipe Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 has been determined based on the testing of pipe and fittings assembled using the cement and the P-1030 or P-1050 primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] Certified for use with BAILEY P-1050 Clear Water Thin PVC/CPVC Plastic Pipe Cement Primer, ERA P-1050 Clear Water Thin PVC/CPVC Plastic Pipe Cement Primer, G-GOOD P-1050 Clear Water Thin PVC/CPVC Plastic Pipe Cement Primer, BAILEY P-1050 Purple Water Thin PVC/CPVC Plastic Pipe Cement Primer, ERA P-1050 Purple Water Thin PVC/CPVC Plastic Pipe Cement Primer, G-GOOD P-1050 Purple Water Thin PVC/CPVC Plastic Pipe Cement Primer.

Teknor Apex Company
505 Central Avenue
Pawtucket, RI 02861
United States
800-556-3864
401-725-8000
Visit this company's website

Facility : # 2 USA

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC# ¢ +++	1	AquaGuard CD12N-001TD	CSA B137.6 24448
CPVC# +++	1	AquaGuard CD12N-001TD	ASTM D1784 24448
CPVC 4120# ¢ +++	2	AquaGuard CM12N-001GD	CSA B137.6 23447
CPVC 4120# +++	2	AquaGuard CM12N-001GD	ASTM D1784 23447
CPVC 4120# ¢ +++	2	AquaGuard CM12N-001TD	CSA B137.6 23447
CPVC 4120# +++	2	AquaGuard CM12N-001TD	ASTM D1784 23447
# Trade designation may or may not be followed by a three digit color number and alpha packaging code. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

The Gorilla Glue Company LLC
2101 E. Kemper Road
Cincinnati, OH 45241
United States
513-271-3300
Visit this company's website

Facility : # 2 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++	CPVC	PW, DWV, SW	Gorilla Medium Body Yellow One Step CPVC Cement	ASTM F493
Solvent Cement+++	CPVC	PW, DWV, SW	Gorilla Medium Body Yellow One Step CPVC Cement	ASTM D2846
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

The Supreme Industries Limited
Gat No. 47-48, Unit-III
At Post-Gadegaon, Tal Jamner
Jalgaon, Maharashtra 425114
India
91 257 3050632
Visit this company's website

Facility : Jalgaon, Maharashtra, India

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [4]	CPVC	PW, DWV, SW	SILBOND Medium Bodied All Weather CPVC Solvent Cement	ASTM F493
Solvent Cement+++ [1] [4]	CPVC	PW, DWV, SW	SILBOND Regular Bodied All Weather CPVC Solvent Cement	ASTM F493
Solvent Cement+++ [1] [4]	CPVC	PW, DWV, SW	SILBOND Heavy Bodied All Weather CPVC Solvent Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61, Section 4. [4] Certified for use with SILBOND Purple Primer Cleaner. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Thermafit Industries, Inc.
1530 Keswick Street
Van Nuys, CA 91405
United States
877-827-2782

Facility : # 1 USA

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement+++ [1] [3] [G]

CPVC

PW, DWV, SW

ThermaFit TFI Fire Sprinkler One-Step Cement

ASTM F493

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[3] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tigre Materials E Solucoes Para Construcao LTDA
Rua dos Bororos 84 - Distrito Industrial
Joinville SC 89239 290
Brazil
55 47 3441 9661

Facility : # 1 USA

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement+++ [1] [2] [G]

CPVC

PW, DWV, SW

Tigre Adesivo Plastio Para CPVC Sch. 80 Laranja

ASTM F493

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Tigre Primer para CPVC Sch. 80 Roxo Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Tigre Peru Tubos y Conexiones S.A.
C.a.2.MZA. A Lote 01 Lotiz. Indust.
El Lucumo
Lurin, Lima
Peru
51 1 4106730

Facility : # 2 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement++ [1] [2]	CPVC	PW, DWV, SW	Tigre Cemento Solvente Para CPVC Naranja Viscosidad Media	ASTM F493
Solvent Cement§ +++ [2] [G]	CPVC	PW, DWV, SW	Tigre Cemento Solvente Para CPVC Naranja Viscosidad Regular	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Matusita Tigre Primer Transparente para PVC y CPVC. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings assembled using the cement without a primer. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Tigre USA, Inc.
2315 Beloit Avenue
Janesville, WI 53546
United States
608-754-4554
Visit this company's website

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Tigre CPVC Cement Medium Body Yellow	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	Tigre CPVC Cement Regular Body Orange	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and an NSF® Certified Arrow Adhesives Company primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

TUBOSA SAS
Calle 14B #20E-80
Cencar, Yumb
Valle del Cauca
Colombia
602 6411205
Visit this company's website

Facility : Taizhou, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [G]	CPVC	TUBOSA	ASTM D2846
45° Elbow
CODO 45° 1/2" CPVC IMP	CODO 45° 3/4" CPVC IMP	CODO 45° 1" CPVC IMP	CODO 45° 1-1/4" CPVC IMP
CODO 45° 1-1/2" CPVC IMP	CODO 45° 2" CPVC IMP
90° Elbow
CODO 90° 1/2" CPVC IMP	CODO 90° 3/4" CPVC IMP	CODO 90° 1" CPVC IMP	CODO 90° 1-1/4" CPVC IMP
CODO 90° 1-1/2" CPVC IMP	CODO 90° 2" CPVC IMP
End Plug
TAPON SOLDADO 1/2" CPVC IMP	TAPON SOLDADO 3/4" CPVC IMP	TAPON SOLDADO 1" CPVC IMP	TAPON SOLDADO 1-1/4" CPVC IMP
TAPON SOLDADO 1-1/2" CPVC IMP	TAPON SOLDADO 2" CPVC IMP
Socket
UNION 1/2" CPVC IMP	UNION 3/4" CPVC IMP	UNION 1" CPVC IMP	UNION 1-1/4" CPVC IMP
UNION 1-1/2" CPVC IMP	UNION 2" CPVC IMP
Straight Tee
TEE 1/2" CPVC IMP	TEE 3/4" CPVC IMP	TEE 1" CPVC IMP	TEE 1-1/4" CPVC IMP
TEE 1-1/2" CPVC IMP	TEE 2" CPVC IMP
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Unecol Adhesive Ideas, S.L.
Poligono Industrial Juan Carlos I
Avenida de la Foia, 44
46440 Almussafes, Valencia
Spain
34 90 299 54 64
Visit this company's website

Facility : Almussafes, Valencia, Spain

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	724 CPVC Cement Heavy Bodied Gray	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	824 CPVC Cement Heavy Bodied Gray	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	Unecol CPVC Cement Heavy	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	Unecol CPVC Cement Medium	ASTM F493
Solvent Cement§ +++ [1] [2] [G]	CPVC	PW, DWV, SW	Unecol CPVC Cement Regular	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI Standard 61 is evaluated based on pipe and fittings assembled using the cement without a primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

United Elchem Industries, Inc.
4700 West 160th Street
Cleveland, OH 44135
United States
216-267-7100

Facility : Omaha, NE

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement+++ [1] [2] [3]

CPVC

PW, DWV, SW

Uni-Weld 3200 Low-VOC Medium Orange Cement

ASTM F493

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Harvey's Purple Primer.
[3] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

United Sealants & Adhesives
8504 Firestone Blvd. #135
Downey, CA 90241
United States
562-394-8136
Visit this company's website

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	5112 CPVC Low VOC Gold One Step Yellow	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	5113 CPVC Low VOC Regular Body Orange	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	5114 CPVC Low VOC Heavy Body Gray	ASTM F493
Solvent Cement§ +++ [1] [G]	CPVC	PW, DWV, SW	5114 CPVC Low VOC Heavy Body Orange	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and an NSF® Certified Arrow Adhesives Company primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Utility Mfg. Co., Inc.
700 Main Street
Westbury, NY 11590
United States
516-997-6300

Facility : # 11 PPCP USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++	CPVC	PW	Plasti-Seal CPVC Gloo	ASTM F493
Solvent Cement+++	CPVC	PW	Plasti-Seal CPVC Heavy Body Gloo	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Victaulic Co.
4901 Kesslersville Road
Easton, PA 18040
United States
800-742-5842
610-559-3300
Visit this company's website

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++	CPVC	300 Series	*SE 17304*
350 (90° Elbow)
2 1/2"	3"	4"	6"
8"
351 (45° Elbow)
2 1/2"	3"	4"	6"
8"
352 (Tee)
2 1/2"	3"	4"	6"
8"
353 (Reducing Tee) (Groove x Groove x Groove)
6" x 6" x 3"	8" x 8" x 4"
354 (Reducing Tee) (Groove × Groove × Socket)
2 1/2" x 2 1/2" x 2"	3" x 3" x 2"	4" x 4" x 2"	6" x 6" x 2"
8" x 8" x 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Facility : # 2 USA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++	CPVC	300 Series	*SE 17304*
350 (90° Elbow)
2 1/2"	3"	4"
351 (45° Elbow)
2 1/2"	3"	4"
352 (Tee)
2 1/2"	3"	4"
354 (Reducing Tee) (Groove × Groove × Socket)
2 1/2" x 2 1/2" x 2"	3" x 3" x 2"	4" x 4" x 2"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Viking Plastics
202 Industrial Drive
Huntsville, AL 35811
United States
256-858-3711

Facility : Huntsville, AL

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [G]	CPVC	Viking Plastics	ASTM F442
3/4" - 3"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Viking Plastics LLC
202 Industrial Drive
Huntsville, AL 35811
United States
256-858-3711

Facility : Huntsville, AL

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+++ [G]	CPVC	KT Plastics Blazemaster	ASTM F442
3/4" thru 3"
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Viking Plastics LLC
3033 Orchard Vista Drive Southeast
Suite 308
Grand Rapids, MI 49546
United States
800-968-9501

Facility : # 1 USA

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement+++ [2] [G]

CPVC

Viking® BlazeMaster® CPVC Cement

ASTM F493

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Viking Plastics LLC
5150 Beltway Drive South East
Caledonia, MI 49316
United States
800-968-9501
269-945-8247
Visit this company's website

Facility : Charlestown, IN

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings! § +++ [G]	CPVC	Viking	ASTM F438
45° Elbow
3/4" V5006-007	1" V5006-010	1 1/4" V5006-012
90° Elbow
3/4" V5007-007	1" V5007-010	1 1/4" V5007-012
Cap
3/4" V5017-007	1" V5017-010	1 1/4" V5017-012
Coupling
3/4" V5001-007	1" V5001-010	1 1/4" V5001-012
Cross
3/4" V5035-007	1" V5035-010	1 1/4" V5035-012
Grooved Adapter
1" V5001G-010
Reducer Coupling
1" x 3/4" V5001R-131	1 1/4" x 1" V5001R-168
Reducing Bushing
1" x 3/4" V5018-131	1 1/4" x 3/4" V5018-167	1 1/4" x 1" V5018-168
Reducing Cross
1" X 3/4" V5035R-131
Reducing Elbow
1" x 3/4" V5007R-131
Tee
3/4" V5011-007	3/4" x 3/4" x 1" V5011R-102	1" V5011-010	1" x 3/4" x 3/4" V5011R-125
1" x 3/4" x 1" V5011R-126	1" x 1" x 3/4" V5011R-131	1 1/4" V5011-012	1 1/4" x 1" x 3/4" V5011R-157
1 1/4" x 1" x 1" V5011R-158	1 1/4" x 1" x 1 1/4"V5001R-159	1 1/4" x 1 1/4" x 3/4" V5001R-167	1 1/4" x 1 1/4" x 1"V5011R-168
1 1/4" x 1 1/4" x 1 1/2" V5001R-169
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings! & § +++ [G]	CPVC	Viking	ASTM F1970
Union
V5033E-007 3/4"	V5033E-010 1"
! Product may or may not bear the NSF U.P. code marking. & 175 PSI @ 150F § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings! § +++ [G]	CPVC	Viking	ASTM F439
45° Elbow
2" V5006-02	2 1/2" V5006-025	3" V5006-030	1 1/2" V5006-015
90° Elbow
2" V5007-020	2 1/2" V5007-025	3" V5007-030	1 1/2" V5007-015
Cap
2" V5017-020	2 1/2" V5017-025	3" V5017-030	1 1/2" V5017-015
Coupling
2" V5001-020	3" V5001-025	2 1/2" V5001-030	1 1/2" V5001-015
Cross
2" V5035-020	2 1/2" V5035-025	3" V5035-030	1 1/2" V5035-015
Grooved Adapter
3" V5001G-030	1 1/2" V5001G-015	2" V5001G-020	2 1/2" V5001G-025
Reducer Coupling
1 1/2" x 3/4" V5001R-210	2" x 1" V5001R-249	1 1/2" x 1" V5001R-211	1 1/2" x 1 1/4" V5001R-212
2" x 1 1/2" V5001R-251
Reducing Bushing
2 1/2" x 1 1/2" V5018-291	1 1/2" x 1" V5018-211	1 1/2" x 1 1/4" V5018-212	1 1/2" x 3/4" V5018-210
2 1/2" x 1 1/4" V5018-290	3" x 2 1/2" V5018-339	2" x 1" V5018-249	2" x 1 1/2" V5018-251
2" x 1 1/4" V5018-250	2" x 3/4" V5018-248	2 1/2" x 2" V5018-292	2 1/2" x 1" V5018-289
3" x 1 1/2" V5018-337	3" x 2" V5018-338
Tee
3" x 3" x 2 1/2" V5011R-339	1 1/2" V5011-015	1 1/2" x 1 1/4" x 3/4" V5011R-201	1 1/2" x 1 1/4" x 1" V5011R-202
1 1/2" x 1 1/2" x 3/4" V5011R-210	1 1/2" x 1 1/2" x 1" V5011R-211	1 1/2" x 1 1/2" x 1 1/4" V5011R-212	1 1/2" x 1 1/2" x 2" V5011R-213
2" V5011-020	2 1/2" V5011-025	2" x 2" x 3/4" V5011R-248	2" x 2" x 1 1/4" V5011R-250
2" x 2" x 1" V5011R-249	2" x 2" x 1 1/2" V5011R-251	2 1/2" x 2 1/2" x 1" V5011R-289	2 1/2" x 2 1/2" x 1 1/4" V5011R-290
2 1/2" x 2 1/2" x 1 1/2" V5011R-291	2 1/2" x 2 1/2" x 2" V5011R-292	3" V5011-030	3" x 3" x 1 1/2" V5011R-337
3" x 3" x 2" V5011R-338
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings! § +++ [G]	CPVC	Viking	*SE 8817*
Grooved Adapter
65mm x 2 1/2" V5001G-065
! Product may or may not bear the NSF U.P. code marking. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Viterra Systems LLC
1830 Fllower Ave.
Duarte, CA 91010
United States
1-626-716-2238

Facility : Guangdong, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# § +++ [G]	CPVC	Lesso	ASTM D2846
Tee
CC4101-005 1/2" Tee (SOC × SOC × SOC)	CC4101-007 3/4" Tee (SOC × SOC × SOC)	CC4101-010 1" Tee (SOC × SOC × SOC)	CC4101-012 1-1/4" Tee (SOC × SOC × SOC)
CC4101-015 1-1/2" Tee (SOC × SOC × SOC)	CC4101-020 2" Tee (SOC × SOC × SOC)
Reducing Tee
CC4101-074 1/2"×1/2"×3/4" Reducing Tee (SOC × SOC × SOC)	CC4101-094 3/4"×1/2"×1/2" Reducing Tee (SOC × SOC × SOC)	CC4101-095 3/4"×1/2"×3/4" Reducing Tee (SOC × SOC × SOC)	CC4101-101 3/4"×3/4"×1/2" Reducing Tee (SOC × SOC × SOC)
CC4101-102 3/4"×3/4"×1" Reducing Tee (SOC × SOC × SOC)	CC4101-125 1"×3/4"×3/4" Reducing Tee (SOC × SOC × SOC)	CC4101-130 1"×1"×1/2" Reducing Tee (SOC × SOC × SOC)	CC4101-131 1"×1"×3/4" Reducing Tee (SOC × SOC × SOC)
CC4101-167 1-1/4"×1-1/4"×3/4" Reducing Tee (SOC × SOC × SOC)	CC4101-168 1-1/4"×1-1/4"×1" Reducing Tee (SOC × SOC × SOC)	CC4101-209 1-1/2"×1-1/2"×1/2" Reducing Tee (SOC × SOC × SOC)	CC4101-210 1-1/2"×1-1/2"×3/4" Reducing Tee (SOC × SOC × SOC)
CC4101-211 1-1/2"×1-1/2"×1" Reducing Tee (SOC × SOC × SOC)	CC4101-247 2"×2"×1/2" Reducing Tee (SOC × SOC × SOC)	CC4101-248 2"×2"×3/4" Reducing Tee (SOC × SOC × SOC)	CC4101-249 2"×2"×1" Reducing Tee (SOC × SOC × SOC)
CC4101-250 2"×2"×1-1/4" Reducing Tee (SOC × SOC × SOC)	CC4101-251 2"×2"×1-1/2" Reducing Tee (SOC × SOC × SOC)
90°Elbow
CC4106-005 1/2" 90°Ell (SOC × SOC)	CC4106-007 3/4" 90°Ell (SOC × SOC)	CC4106-010 1" 90°Ell (SOC × SOC)	CC4106-012 1-1/4"90°Ell (SOC × SOC)
CC4106-015 1-1/2"90°Ell (SOC × SOC)	CC4106-020 2" 90°Ell (SOC × SOC)
90°Reducing Elbow
CC4106-101 3/4"×1/2" 90°Reducing Ell (SOC × SOC)
45°Elbow
CC4117-005 1/2" 45°Ell (SOC × SOC)	CC4117-007 3/4" 45°Ell (SOC × SOC)	CC4117-010 1" 45°Ell (SOC × SOC)	CC4117-012 1-1/4" 45°Ell (SOC × SOC)
CC4117-015 1-1/2" 45°Ell (SOC × SOC)	CC4117-020 2" 45°Ell (SOC × SOC)
Reducing Coupling
CC4129-101 3/4"×1/2" Reducing Coupling (SOC × SOC)	CC4129-131 1"×3/4" Reducing Coupling (SOC × SOC)	CC4129-166 1-1/4"×1/2" Reducing Coupling (SOC × SOC)	CC4129-248 2"×3/4" Reducing Coupling (SOC × SOC)
CC4129-249 2"×1" Reducing Coupling (SOC × SOC)	CC4129-250 2"×1-1/4" Reducing Coupling (SOC × SOC)	CC4129-251 2"×1-1/2" Reducing Coupling (SOC × SOC)
Coupling
CC4129-005 1/2" Coupling (SOC × SOC)	CC4129-007 3/4" Coupling (SOC × SOC)	CC4129-010 1" Coupling (SOC × SOC)	CC4129-012 1-1/4" Coupling (SOC × SOC)
CC4129-015 1-1/2" Coupling (SOC × SOC)	CC4129-020 2" Coupling (SOC × SOC)
Cap
CC4147-005 1/2" Cap (SOC)	CC4147-007 3/4" Cap (SOC)	CC4147-010 1" Cap (SOC)	CC4147-012 1-1/4" Cap (SOC)
CC4147-015 1-1/2" Cap (SOC)	CC4147-020 2" Cap (SOC)
Female Adapter
CC4135-007SS 3/4" Female Adapter (SOC × METAL FIPT)
Transition Coupling
CC4141-007 3/4" Transition Coupling (IPS SOC × CTS SOC)
Reducing Bushing
CC4137-101 3/4"×1/2" Reducing Bushing (SPIG × SOC)	CC4137-130 1"×1/2" Reducing Bushing (SPIG × SOC)	CC4137-131 1"×3/4" Reducing Bushing (SPIG × SOC)	CC4137-166 1-1/4"×1/2" Reducing Bushing (SPIG × SOC)
CC4137-167 1-1/4"×3/4" Reducing Bushing (SPIG × SOC)	CC4137-168 1-1/4"×1" Reducing Bushing (SPIG × SOC)	CC4137-209 1-1/2"×1/2" Reducing Bushing (SPIG × SOC)	CC4137-210 1-1/2"×3/4" Reducing Bushing (SPIG × SOC)
CC4137-211 1-1/2"×1" Reducing Bushing (SPIG × SOC)	CC4137-212 1-1/2"×1-1/4" Reducing Bushing (SPIG × SOC)	CC4137-248 2"×3/4" Reducing Bushing (SPIG × SOC)	CC4137-249 2"×1" Reducing Bushing (SPIG × SOC)
CC4137-250 2"×1-1/4" Reducing Bushing (SPIG × SOC)	CC4137-251 2"×1-1/2" Reducing Bushing (SPIG × SOC)	CC4140-007 3/4" Transition Bushing (IPS SPIG × CTS SOC)	CC4140-010 1" Transition Bushing (IPS SPIG × CTS SOC)
CC4140-012 1-1/4" Transition Bushing (IPS SPIG × CTS SOC)	CC4140-015 1-1/2" Transition Bushing (IPS SPIG × CTS SOC)	CC4140-020 2" Transition Bushing (IPS SPIG × CTS SOC)
Drop Ear 90°Ell w/Bracket
CCDE4106-005 1/2" Drop Ear 90°Ell w/Bracket (SOC × SOC)
Drop Ear 90°Ell
CCDE4107-005SS 1/2" Drop Ear 90°Ell (SOC × METAL FIPT)
Female Adapter
CC4135-005SS 1/2" Female Adapter (SOC × METAL FIPT)
90° Street Elbow
CC4109-005 1/2" 90° Street Ell (SPIG × SOC)	CC4109-007 3/4" 90° Street Ell (SPIG × SOC)	CC4109-010 1" 90° Street Ell (SPIG × SOC)	CC4127-005 1/2" 45° Street Ell (SPIG × SOC)
CC4127-007 3/4" 45° Street Ell (SPIG × SOC)	CC4127-010 1" 45° Street Ell (SPIG × SOC)
Male Adapter
CC4136-005SS 1/2" Male Adapter (SOC × METAL MIPT)	CC4136-007SS 3/4" Male Adapter (SOC × METAL MIPT)	CC4136-010SS 1" Male Adapter (SOC × METAL MIPT)
Male Adapter
CC4136-005 1/2" Male Adapter (SOC × MIPT)	CC4136-007 3/4" Male Adapter (SOC × MIPT)	CC4136-010 1" Male Adapter (SOC × MIPT)	CC4136-012 1-1/4" Male Adapter (SOC × MIPT)
# This product may be marked with an alternate trade name: Liansu. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

[6] Certification includes the following:
    1/8" - 24" Sch40 PVC pipe
    031-001 1/8"        
    031-002 1/4"        
    031-003 3/8"
    031-100 10" 
    031-120 12" 
    031-140 14" 
    031-160 16" 
    031-180 18" 
    031-200 20" 
    031-240 24" 
    041-001 1/8"        
    041-002 1/4"        
    041-003 3/8"
    041-005 1/2"        
    041-100 10" 
    041-120 12" 
    041-140 14" 
    041-160 16" 
    041-180 18" 
    041-200 20" 
    041-240 24"
    
[7] Certification includes the following:
    1/8" - 24" Sch80 PVC Pipe
    071-001 1/8"        
    071-002 1/4"        
    071-003 3/8"        
    071-035 3-1/2"
    071-050 5"
    071-080 8"  
    071-100 10" 
    071-120 12" 
    071-140 14" 
    071-160 16" 
    071-180 18" 
    071-200 20" 
    071-240 24" 
    081-001 1/8"        
    081-002 1/4"        
    081-003 3/8"        
    081-035 3-1/2"      
    081-050 5"          
    081-080 8"  
    081-100 10" 
    081-120 12" 
    081-140 14" 
    081-160 16" 
    081-180 18" 
    081-200 20" 
    081-240 24"

Weld All LLC
100 Trousdale Way
Hartsville, TN 37074
United States
310-898-3350

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	WHITEX 07140[X] CPVC Orange Heavy Body-Low VOC*	ASTM F493
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	WHITEX 07140[X] CPVC Orange Heavy Body-Low VOC*	ASTM D2846
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-All 7114 CPVC Grey/Gray Heavy Bodied Low VOC	ASTM D2846
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-All 7114 CPVC Grey/Gray Heavy Bodied Low VOC	ASTM F493
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-All™ 7114[X] CPVC Orange Heavy Body-Low VOC*	ASTM F493
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-All™ 7114[X] CPVC Orange Heavy Body-Low VOC*	ASTM D2846
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-All™ 7119[X] CPVC Yellow Medium Body-One Step-Low VOC*	ASTM F493
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-All™ 7119[X] CPVC Yellow Medium Body-One Step-Low VOC*	ASTM D2846
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-All™ 7129[X] CPVC Orange Medium Body-Low VOC*	ASTM D2846
Solvent Cement++ [1] [2] [G]	CPVC	PW, DWV, SW	Weld-All™ 7129[X] CPVC Orange Medium Body-Low VOC*	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Weld-All™ 8151[X] Clear Primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Weld-All
100 Trousdale Way
Hartsville, TN 37074
United States
305-755-3615

Facility : # 3 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement++ [1] [2]	CPVC	PW, DWV, SW	Weld-All 7114 CPVC Grey/Gray Heavy Bodied Low VOC	ASTM F493
Solvent Cement++ [1] [2]	CPVC	PW, DWV, SW	Weld-All 7114[X] CPVC Orange Heavy Bodied Low VOC*	ASTM F493
Solvent Cement++ [1] [2]	CPVC	PW, DWV, SW	Weld-All 7114[X] CPVC Orange Heavy Bodied Low VOC*	ASTM D2846
* [X] Indicates size of container: 04 - 1/4 pint 08 - 1/2 pint 16 - 1 pint 32 - 1 quart 01 - 1 gallon + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Weld-All™ 8151[X] Clear Primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Westlake Compounds LLC, a Westlake Chemical Corporation
210 Industrial Drive North
Madison, MS 39110
United States
601-206-3255
Visit this company's website

Facility : Aberdeen, MS

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Gray 165¢	SE 8225
CPVC 4120+++ [2]	1	Protherm 4303 Gray 165¢	CSA B137.6
CPVC 4120+++ [2]	1	Protherm 4303 Gray 165¢	ASTM D1784 24448
CPVC 4120-06+++ [2]	1	Protherm 4303 Gray 451¢	ASTM D1784 24448
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Gray 451¢	SE 8225
CPVC 4120+++ [2]	1	Protherm 4303 Gray 451 ¢	CSA B137.6
CPVC 4120+++ [2]	1	Protherm 4303 Orange 25¢	CSA B137.6
CPVC 4120-06+++ [2]	1	Protherm 4303 Orange 25¢	ASTM D1784 24448
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Orange 25¢	SE 8225
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Tan 01¢	SE 8225
CPVC 4120+++ [2]	1	Protherm 4303 Tan 01¢	CSA B137.6
CPVC 4120-06+++ [2]	1	Protherm 4303 Tan 01¢	ASTM D1784 24448
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Tan 351¢	SE 8225
CPVC 4120-06+++ [2]	1	Protherm 4303 Tan 351¢	ASTM D1784 24448
CPVC 4120+++ [2]	1	Protherm 4303 Tan 351¢	CSA B137.6
CPVC 4120+++ [2]	1	Protherm 4345 Gray 165¢	CSA B137.6
CPVC 4120-05+++ [2]	1	Protherm 4345 Gray 165¢	ASTM D1784 23447
CPVC 4120-05+++ [2]	1	Protherm 4345 Orange 25¢	ASTM D1784 23447
CPVC 4120+++ [2]	1	Protherm 4345 Orange 25¢	CSA B137.6
CPVC 4120+++ [2]	1	Protherm 4345 Tan 01¢	CSA B137.6
CPVC 4120-05+++ [2]	1	Protherm 4345 Tan 01¢	ASTM D1784 23447
CPVC 4120-05+++ [2] [5]	1	Protherm 4353 Gray 165¢	ASTM D1784 23447
CPVC 4120+++ [2] [5]	1	Protherm 4353 Gray 165¢	CSA B137.6
CPVC 4120+++ [2] [5]	1	Protherm 4353 Orange 25¢	CSA B137.6
CPVC 4120-05+++ [2] [5]	1	Protherm 4353 Orange 25¢	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4526 Black 11	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4526 Gray 165	ASTM D1784 23447
CPVC IV-G1+++ [2]	2	Protherm 4526 Orange 25	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4526 Tan 01	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4526 Tan 351	ASTM D1784 24447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Black 11	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Black 66	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Blue 115	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Blue 116	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Gray 165	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Gray 451	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Gray 73	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Orange 25	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Tan 01	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 White 974	ASTM D1784 23447
CPVC 4120+++ [2] [5]	1	Protherm® 4353 Tan 01¢	CSA B137.6
CPVC 4120-05+++ [2] [5]	1	Protherm® 4353 Tan 01¢	ASTM D1784 23447
* Tested at 180°F + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for a maximum surface area to volume ratio of 250 sq. in./L. [2] Material trade designation may or may not be followed by either an "M" or an "R": M - Milled/chopped pellets R - Round pellets [3] Certified for a maximum surface to volume ratio of 295 sq. in./L. [4] Material complies with the material requirements of NSF SE 8225. [5] Certified for a maximum surface to volume ratio of 500 sq. in./L.

NOTE: The trade designation may or may not include "Georgia Gulf".
NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Facility : Gallman, MS

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
CPVC 4120-06+++ [2]	1	Protherm 4303 Gray 165¢	ASTM D1784 24448
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Gray 165¢	SE 8225
CPVC 4120-06+++ [2]	1	Protherm 4303 Gray 165¢	CSA B137.6
CPVC 4120-06+++ [2]	1	Protherm 4303 Gray 451¢	ASTM D1784 24448
CPVC 4120+++ [2]	1	Protherm 4303 Gray 451¢	CSA B137.6
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Gray 451¢	SE 8225
CPVC 4120-06+++ [2]	1	Protherm 4303 Orange 25¢	ASTM D1784 24448
CPVC 4120-06+++ [2]	1	Protherm 4303 Orange 25¢	CSA B137.6
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Orange 25¢	SE 8225
CPVC 4120+++ [2]	1	Protherm 4303 Tan 01¢	CSA B137.6
CPVC 4120-06+++ [2]	1	Protherm 4303 Tan 01¢	ASTM D1784 24448
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Tan 01¢	SE 8225
CPVC 4120-06+++ [2]	1	Protherm 4303 Tan 351¢	ASTM D1784 24448
CPVC 4120+++ [2]	1	Protherm 4303 Tan 351¢	CSA B137.6
CPVC 4120-06+++ [2] [4]	1	Protherm 4303 Tan 351¢	SE 8225
CPVC 4120-05+++ [2]	1	Protherm 4345 Gray 165¢	CSA B137.6
CPVC 4120+++ [2]	1	Protherm 4345 Gray 165¢	ASTM D1784 24447
CPVC 4120-05+++ [2]	1	Protherm 4345 Orange 25¢	ASTM D1784 23447
CPVC 4120-05+++ [2]	1	Protherm 4345 Orange 25¢	CSA B137.6
CPVC 4120-06+++ [2]	1	Protherm 4345 Tan 01¢	CSA B137.6
CPVC 4120-05+++ [2]	1	Protherm 4345 Tan 01¢	ASTM D1784 23447
CPVC 4120+++ [2] [5]	1	Protherm 4353 Gray 165¢	CSA B137.6
CPVC 4120-05+++ [2] [5]	1	Protherm 4353 Gray 165¢	ASTM D1784 23447
CPVC 4120-05+++ [2] [5]	1	Protherm 4353 Orange 25¢	ASTM D1784 23447
CPVC 4120+++ [2] [5]	1	Protherm 4353 Orange 25¢	CSA B137.6
CPVC IV-G1* +++ [2]	2	Protherm 4526 Black 11	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4526 Gray 165	ASTM D1784 23447
CPVC IV-G1+++ [2]	2	Protherm 4526 Orange 25	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4526 Tan 01	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4526 Tan 351	ASTM D1784 24447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Black 11	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Black 66	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Blue 115	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Blue 116	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Gray 165	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Gray 451	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Gray 73	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Orange 25	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 Tan 01	ASTM D1784 23447
CPVC IV-G1* +++ [2]	2	Protherm 4529 White 974	ASTM D1784 23447
CPVC 4120+++ [2] [5]	1	Protherm® 4353 Tan 01¢	CSA B137.6
CPVC 4120-05+++ [2] [5]	1	Protherm® 4353 Tan 01¢	ASTM D1784 23447
* Tested at 180°F + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Certified for a maximum surface area to volume ratio of 250 sq. in./L. [2] Material trade designation may or may not be followed by either an "M" or an "R": M - Milled/chopped pellets R - Round pellets [3] Certified for a maximum surface to volume ratio of 295 sq. in./L. [4] Material complies with the material requirements of NSF SE 8225. [5] Certified for a maximum surface to volume ratio of 500 sq. in./L.

NOTE: The trade designation may or may not include "Georgia Gulf".
NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Westlake Pipe & Fittings
414 Morgan Street
Brownsville, TN 38012
United States
866-769-7473

Facility : Markham, Ontario, Canada

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement^ [G]

CPVC

CPVC Solvent Cement - Medium Bodied (Orange) SOLV-99US016O / SOLV-99US032O

ASTM F493

* Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 180° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Westlake Pipe & Fittings Corporation
The Westlake Center
2801 Post Oak Boulevard, Suite 650
Houston, TX 77056
United States
800-999-7473
713-585-2621

Facility : Brownsville, TN

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings+++ [1] [2] [G]	CPVC	LASCO CPVC Fittings	ASTM F439
45° Ell (S)
1/4" - 8" (9817-xxx)
45° Ell (T)
3/8" - 2" (9819-xxx)
90° Ell (S)
1/4" - 8" (9806-xxx)
90° Ell (SxT)
3/8" - 2" (9807-xxx)
90° Ell (T)
3/8" - 2" (9808-xxx)
Bushing (S)
1/4" - 8" (9837-XXX)
Bushing (SxT)
1/4" - 6" (9838-XXX)
Bushing (T)
1/2" - 4" (9839-XXX)
Cap (S)
1/2" - 6" (9847-xxx)
Cap (T)
3/8" - 2" (9830-XXX-SR)	3/8" - 4" (9848-xxx)
Coupling (S)
1/2" - 8" (9829-XXX)
Coupling (T)
3/8" - 2" (9830-xxx)
Female Adapter
1/4" - 4" (9835-xxx)	1/4" - 4" (9835-XXX-SR)
Male Adapter
1/2" - 4" (9836-xxx)
Plug (T)
1/4" - 4" (9850-xxx)
Tee (S)
1/2" - 8" (9801-xxx)
Tee (SST)
1/2" - 4" (9802-xxx)
Tee (T)
3/8" - 4" (9805-xxx)
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxx designates the following sizes: 002 - 1/4" 003 - 3/8" 005 - 1/2" 007 - 3/4" 010 - 1" 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 025 - 2 1/2" 030 - 3" 040 - 4" 052 - 3/8" x 1/4" 060 - 6" 072 - 1/2" x 1/4" 073 - 1/2" x 3/8" 080 - 8" 101 - 3/4" x 1/2" 130 - 1" x 1/2" 131 - 1" x 3/4" 166 - 1 1/4" x 1/2" 167 - 1 1/4" x 3/4" 168 - 1 1/2" x 1" 209 - 1 1/2" x 1/2" 210 - 1 1/2" x 3/4" 211 - 1 1/2" x 1" 212 - 1 1/2" x 1 1/4" 247 - 2" x 1/2" 248 - 2" x 3/4" 249 - 2" x 1" 250 - 2" x 1 1/4" 251 - 2" x 1 1/2" 289 - 2 1/2" x 1" 291 - 2 1/2" x 1 1/2" 292 - 2 1/2" x 2" 334 - 3" x 3" x 3/4" 335 - 3" x 3" x 1" 337 - 3" x 1 1/2" 338 - 3" x 2" 339 - 3" x 2 1/2" 420 - 4" x 2" 421 - 4" x 2 1/2" 422 - 4" x 3" 530 - 6" x 6" x 3" 532 - 6" x 4" 585 - 8" x 6" [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings§ +++ [1] [2] [G]	CPVC	LASCO Copper Tube Size CPVC Fittings	ASTM D2846
CTS 5° Ell (S x Sp)
1/2" - 1" (4127-xxx)
CTS 45° Ell (S x S)
1/2" - 2" (4117-xxx)
CTS 90 ELL Slip x Slip
1/2" - 2" (4106-xxx)
CTS Bushing
1/2" - 2" (4137-XXX)
CTS Cap
1/2" - 2" (4147-xxx)
CTS Coupling
1/2" - 2" (4129-xxx)
CTS Male Adapter
1/2" - 2" (4136-XXX)
CTS Reducer Coupling
1/2" - 2" (4129-xxx)
CTS Reducing Ell
3/4" - 1/2" (4106-xxx)
CTS Street Adapter
1/2" ( 4161-xxx)
CTS Street Ell (H x S)
1/2" - 1" (4109-xxx)
CTS Tee
1/2" - 2" (4101-xxx)
Drop Ear Slip ELL
1/2" (DE4106-005)
Drop Ear Thread ELL
1/2" (DE4107-005)
IPS x CTS Transition Bushing
1/2" - 2" (4140-xxx)
IPS x CTS Transition Coupling
3/4" - 1" (4141-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxx designates the following sizes: 002 - 1/4" 003 - 3/8" 005 - 1/2" 007 - 3/4" 010 - 1" 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 025 - 2 1/2" 030 - 3" 040 - 4" 052 - 3/8" x 1/4" 060 - 6" 072 - 1/2" x 1/4" 073 - 1/2" x 3/8" 080 - 8" 101 - 3/4" x 1/2" 130 - 1" x 1/2" 131 - 1" x 3/4" 166 - 1 1/4" x 1/2" 167 - 1 1/4" x 3/4" 168 - 1 1/2" x 1" 209 - 1 1/2" x 1/2" 210 - 1 1/2" x 3/4" 211 - 1 1/2" x 1" 212 - 1 1/2" x 1 1/4" 247 - 2" x 1/2" 248 - 2" x 3/4" 249 - 2" x 1" 250 - 2" x 1 1/4" 251 - 2" x 1 1/2" 289 - 2 1/2" x 1" 291 - 2 1/2" x 1 1/2" 292 - 2 1/2" x 2" 334 - 3" x 3" x 3/4" 335 - 3" x 3" x 1" 337 - 3" x 1 1/2" 338 - 3" x 2" 339 - 3" x 2 1/2" 420 - 4" x 2" 421 - 4" x 2 1/2" 422 - 4" x 3" 530 - 6" x 6" x 3" 532 - 6" x 4" 585 - 8" x 6" [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings§ +++ [1] [2] [G]	CPVC	LASCO	CSA B137.6
CTS 5° Ell (S x Sp)
1/2" - 1" (4127-xxx)
CTS 45° Ell (S x S)
1/2" - 2" (4117-xxx)
CTS 90 Ell Slip x Slip
1/2" - 2" (4106-xxx)
CTS Bushing
1/2" - 2" (4137-XXX)
CTS Cap
1/2" - 2" (4147-xxx)
CTS Coupling
1/2" - 2" (4129-xxx)
CTS Male Adapter
1/2" x 3/4" (4136-XXX)
CTS Reducer Coupling
1/2" - 2" (4129-xxx)
CTS Reducing Ell
3/4" - 1/2" (4106-xxx)
CTS Street Adapter
1/2" ( 4161-xxx)
CTS Street Ell (H x S)
1/2" - 1" (4109-xxx)
CTS Tee
1/2" - 2" (4101-xxx)
Drop Ear Slip ELL
1/2" (DE4106-005)
Drop Ear Thread ELL
1/2" (DE4107-005)
IPS x CTS Transition Bushing
1/2" - 2" (4140-xxx)
IPS x CTS Transition Coupling
3/4" - 1" (4141-xxx)
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] xxx designates the following sizes: 002 - 1/4" 003 - 3/8" 005 - 1/2" 007 - 3/4" 010 - 1" 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 025 - 2 1/2" 030 - 3" 040 - 4" 052 - 3/8" x 1/4" 060 - 6" 072 - 1/2" x 1/4" 073 - 1/2" x 3/8" 080 - 8" 101 - 3/4" x 1/2" 130 - 1" x 1/2" 131 - 1" x 3/4" 166 - 1 1/4" x 1/2" 167 - 1 1/4" x 3/4" 168 - 1 1/2" x 1" 209 - 1 1/2" x 1/2" 210 - 1 1/2" x 3/4" 211 - 1 1/2" x 1" 212 - 1 1/2" x 1 1/4" 247 - 2" x 1/2" 248 - 2" x 3/4" 249 - 2" x 1" 250 - 2" x 1 1/4" 251 - 2" x 1 1/2" 289 - 2 1/2" x 1" 291 - 2 1/2" x 1 1/2" 292 - 2 1/2" x 2" 334 - 3" x 3" x 3/4" 335 - 3" x 3" x 1" 337 - 3" x 1 1/2" 338 - 3" x 2" 339 - 3" x 2 1/2" 420 - 4" x 2" 421 - 4" x 2 1/2" 422 - 4" x 3" 530 - 6" x 6" x 3" 532 - 6" x 4" 585 - 8" x 6" [2] Product may also be marked with the trade designation Westlake Pipe & Fittings. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

William H. Harvey Company
4334 South 67th Street
Omaha, NE 68117
United States
800-228-9681
402-331-1175

Facility : Omaha, NE

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Century C-4 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Do It Best C-4 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Harvey's C-6 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Harvey's C-4 CPVC Solvent Cement Orange	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Harvey's C-12 CPVC Solvent Cement Orange	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Harvey's C-12G CPVC Solvent Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Harvey's C-12O CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Harvey's CPVC Medium Orange	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Harvey's Spanish C-4 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	INA C-4 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	LDR CPVC Cement Orange	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	LDR Regular CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Mark's C-4 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Marvin's C-4 Orange	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Otto C-4 Cemento Para CPVC	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Marvin's C-4 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Maxwell Supply C-4 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	ProValue C-4 CPVC Cement	ASTM F493
Solvent Cement+++ [1] [2] [3]	CPVC	PW, DWV, SW	Zenith Plastics C-12 CPVC Cement	ASTM F493
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61, Section 4. [2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Harvey's Purple Primer. [3] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

Number of matching Manufacturers is 117
Number of matching Products is 6518
Processing time was 3 seconds

NSF Product and Service Listings

Did you know?

Connect with NSF