NSF Product and Service Listings

NSF Product and Service Listings

Did you know?

Connect with NSF

These NSF Official Listings are current as of Tuesday, August 18, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?MaterialType=PE&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Advanced Drainage Systems, Inc.
4640 Trueman Boulevard
Hilliard, OH 43026
United States
800-733-7473
614-658-0050
Visit this company's website

Facility : Bakersfield, CA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5*
1/2" - 2" SIDR 15*
1/2" - 2" SIDR 19*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2737
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
1/2" - 2" SDR 11*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	ADS PolyFlex 4710	AWWA C901
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Vicksburg, MS

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5*
1/2" - 2" SIDR 15*
1/2" - 2" SIDR 19*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2737
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
1/2" - 2" SDR 11*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	ADS PolyFlex 4710	AWWA C901
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Harrisonville, MO

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5*
1/2" - 2" SIDR 15*
1/2" - 2" SIDR 19*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2737
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
1/2" - 2" SDR 11*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	ADS PolyFlex 4710	AWWA C901
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Findlay, OH

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5*
1/2" - 2" SIDR 15*
1/2" - 2" SIDR 19*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2737
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
1/2" - 2" SDR 11*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	ADS PolyFlex 4710	AWWA C901
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : London, OH

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5*
1/2" - 2" SIDR 15*
1/2" - 2" SIDR 19*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2737
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
1/2" - 2" SDR 11 SIDR 9*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	ADS PolyFlex 4710	AWWA C901
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Ennis, TX

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5*
1/2" - 2" SIDR 15*
1/2" - 2" SIDR 19*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2737
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
1/2" - 2" SDR 11*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	ADS PolyFlex 4710	AWWA C901
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Advanced Drainage Systems, Inc.
4024 Green Stripe Lane
Hilliard, OH 43026
United States
1-844-ADS-PIPE
Visit this company's website

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 3608/4710	ADS PolyFlex CTS	ASTM D2737
3/4" - 1" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	ADS PolyFlex CTS	ASTM D2737
3/4" - 1" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : # 2 USA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 3608/4710	ADS PolyFlex CTS	ASTM D2737
3/4" - 1" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	ADS PolyFlex CTS	ASTM D2737
3/4" - 1" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Alexander Tubular
3052 - 84 Ave. NW
Edmonton, AB T6P 1K3
Canada
587-930-3368

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Alexander Tubular	ASTM F714
4" - 24" IPS DR 6[1]
4" - 18" IPS DR 7.3
20" - 24" IPS DR 7.3[1]
4" - 24" IPS DR 7
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[1]
4" - 24" IPS DR 17
4" - 24" IPS DR 21
4" - 24" IPS DR 26
4" - 24" IPS DR 32.5
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PE 4710	Alexander Tubular	CSA B137.1
2" - 24" DR 7
2" - 24" DR 7.3
1 ½" - 24" DR 9
¾" - 24" DR 11
1" - 24" DR 13.5
1" - 24" DR 15.5
1 ½" - 24" DR 17
2" - 24" DR 21
6" - 24" DR 26
6" - 24" DR 32.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Alexander Tubular	ASTM F714
4" - 24" IPS DR 6[1]
4" - 18" IPS DR 7.3
20" - 24" IPS DR 7.3[1]
4" - 24" IPS DR 7
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[1]
4" - 24" IPS DR 17
4" - 24" IPS DR 21
4" - 24" IPS DR 26
4" - 24" IPS DR 32.5
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PE 4710	Alexander Tubular	CSA B137.1
2" - 24" DR 7
2" - 24" DR 7.3
1 ½" - 24" DR 9
¾" - 24" DR 11
1" - 24" DR 13.5
1" - 24" DR 15.5
1 ½" - 24" DR 17
2" - 24" DR 21
6" - 24" DR 26
6" - 24" DR 32.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Atkore HDPE Pipe & Conduit
4707 East Kearney Street
Springfield, MO 65803
United States
417-708-9887
Visit this company's website

Facility : Springfield, MO

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	Base-Line	FM 1613
2" - 16" IPS DR 7 (335 PC)
2" - 16" IPS DR 7.3 (320 PC)[1]
2" - 16" IPS DR 9 (250 PC)
2" - 16" IPS DR 11 (200 PC)
2" - 16" DIPS DR 7 (335 PC)
2" - 16" DIPS DR 7.3 (320 PC)[1]
2" - 16" DIPS DR 9 (250 PC)
2" - 16" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Crystal-Line	FM 1613
2" - 16" IPS DR 7 (335 PC)
2" - 16" IPS DR 7.3 (320 PC)[1]
2" - 16" IPS DR 9 (250 PC)
2" - 16" IPS DR 11 (200 PC)
2" - 16" DIPS DR 7 (335 PC)
2" - 16" DIPS DR 7.3 (320 PC)[1]
2" - 16" DIPS DR 9 (250 PC)
2" - 16" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Water-Line	FM 1613
2" - 16" IPS DR 7 (335 PC)
2" - 16" IPS DR 7.3 (320 PC)[1]
2" - 16" IPS DR 9 (250 PC)
2" - 16" IPS DR 11 (200 PC)
2" - 16" DIPS DR 7 (335 PC)
2" - 16" DIPS DR 7.3 (320 PC)[1]
2" - 16" DIPS DR 9 (250 PC)
2" - 16" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Base-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	ASTM F714
4" - 16" IPS DR 7
4" - 16" IPS DR 7.3
4" - 16" IPS DR 9
4" - 16" IPS DR 11
4" - 16" IPS DR 13.5
4" - 16" IPS DR 15.5[2]
4" - 16" IPS DR 17
4" - 16" IPS DR 19[2]
4" - 16" IPS DR 21
4" - 16" IPS DR 26
4" - 16" IPS DR 32.5
4" - 16" DIPS DR 7
4" - 16" DIPS DR 7.3[2]
4" - 16" DIPS DR 9
4" - 16" DIPS DR 11
4" - 16" DIPS DR 13.5
4" - 16" DIPS DR 15.5[2]
4" - 16" DIPS DR 17
4" - 16" DIPS DR 19[2]
4" - 16" DIPS DR 21
4" - 16" DIPS DR 26[2]
4" - 16" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	ASTM F714
4" - 16" IPS DR 7
4" - 16" IPS DR 7.3
4" - 16" IPS DR 9
4" - 16" IPS DR 11
4" - 16" IPS DR 13.5
4" - 16" IPS DR 15.5[2]
4" - 16" IPS DR 17
4" - 16" IPS DR 19[2]
4" - 16" IPS DR 21
4" - 16" IPS DR 26
4" - 16" IPS DR 32.5
4" - 16" DIPS DR 7
4" - 16" DIPS DR 7.3[2]
4" - 16" DIPS DR 9
4" - 16" DIPS DR 11
4" - 16" DIPS DR 13.5
4" - 16" DIPS DR 15.5[2]
4" - 16" DIPS DR 17
4" - 16" DIPS DR 19[2]
4" - 16" DIPS DR 21
4" - 16" DIPS DR 26[2]
4" - 16" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	ASTM F714
4" - 16" IPS DR 7
4" - 16" IPS DR 7.3
4" - 16" IPS DR 9
4" - 16" IPS DR 11
4" - 16" IPS DR 13.5
4" - 16" IPS DR 15.5[2]
4" - 16" IPS DR 17
4" - 16" IPS DR 19[2]
4" - 16" IPS DR 21
4" - 16" IPS DR 26
4" - 16" IPS DR 32.5
4" - 16" DIPS DR 7
4" - 16" DIPS DR 7.3[2]
4" - 16" DIPS DR 9
4" - 16" DIPS DR 11
4" - 16" DIPS DR 13.5
4" - 16" DIPS DR 15.5[2]
4" - 16" DIPS DR 17
4" - 16" DIPS DR 19[2]
4" - 16" DIPS DR 21
4" - 16" DIPS DR 26[2]
4" - 16" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	AWWA C906
4" - 16" IPS DR 7
4" - 16" IPS DR 7.3[2]
4" - 16" IPS DR 9
4" - 16" IPS DR 11
4" - 16" IPS DR 13.5
4" - 16" IPS DR 15.5[2]
4" - 16" IPS DR 17
4" - 16" IPS DR 19[2]
4" - 16" IPS DR 21
4" - 16" IPS DR 26[2]
4" - 16" IPS DR 32.5[2]
4" - 16" DIOD DR 7
4" - 16" DIOD DR 7.3[2]
4" - 16" DIOD DR 11
4" - 16" DIOD DR 9
4" - 16" DIOD DR 13.5
4" - 16" DIOD DR 15.5[2]
4" - 16" DIOD DR 17
4" - 16" DIOD DR 19[2]
4" - 16" DIOD DR 21
4" - 16" DIOD DR 26[2]
4" - 16" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	AWWA C906
4" - 16" IPS DR 7
4" - 16" IPS DR 7.3[2]
4" - 16" IPS DR 9
4" - 16" IPS DR 11
4" - 16" IPS DR 13.5
4" - 16" IPS DR 15.5[2]
4" - 16" IPS DR 17
4" - 16" IPS DR 19[2]
4" - 16" IPS DR 21
4" - 16" IPS DR 26[2]
4" - 16" IPS DR 32.5[2]
4" - 16" DIOD DR 7
4" - 16" DIOD DR 7.3[2]
4" - 16" DIOD DR 11
4" - 16" DIOD DR 9
4" - 16" DIOD DR 13.5
4" - 16" DIOD DR 15.5[2]
4" - 16" DIOD DR 17
4" - 16" DIOD DR 19[2]
4" - 16" DIOD DR 21
4" - 16" DIOD DR 26[2]
4" - 16" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	AWWA C906
4" - 16" IPS DR 7
4" - 16" IPS DR 7.3[2]
4" - 16" IPS DR 9
4" - 16" IPS DR 11
4" - 16" IPS DR 13.5
4" - 16" IPS DR 15.5[2]
4" - 16" IPS DR 17
4" - 16" IPS DR 19[2]
4" - 16" IPS DR 21
4" - 16" IPS DR 26[2]
4" - 16" IPS DR 32.5[2]
4" - 16" DIOD DR 7
4" - 16" DIOD DR 7.3[2]
4" - 16" DIOD DR 11
4" - 16" DIOD DR 9
4" - 16" DIOD DR 13.5
4" - 16" DIOD DR 15.5[2]
4" - 16" DIOD DR 17
4" - 16" DIOD DR 19[2]
4" - 16" DIOD DR 21
4" - 16" DIOD DR 26[2]
4" - 16" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Albuquerque, NM

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	Base-Line	FM 1613
2" - 24" IPS DR 7 (335 PC)
2" - 24" IPS DR 7.3 (320 PC)[1]
2" - 24" IPS DR 9 (250 PC)
2" - 24" IPS DR 11 (200 PC)
2" - 24" DIPS DR 7 (335 PC)
2" - 24" DIPS DR 7.3 (320 PC)[1]
2" - 24" DIPS DR 9 (250 PC)
2" - 24" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Crystal-Line	FM 1613
2" - 24" IPS DR 7 (335 PC)
2" - 24" IPS DR 7.3 (320 PC)[1]
2" - 24" IPS DR 9 (250 PC)
2" - 24" IPS DR 11 (200 PC)
2" - 24" DIPS DR 7 (335 PC)
2" - 24" DIPS DR 7.3 (320 PC)[1]
2" - 24" DIPS DR 9 (250 PC)
2" - 24" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Water-Line	FM 1613
2" - 24" IPS DR 7 (335 PC)
2" - 24" IPS DR 7.3 (320 PC)[1]
2" - 24" IPS DR 9 (250 PC)
2" - 24" IPS DR 11 (200 PC)
2" - 24" DIPS DR 7 (335 PC)
2" - 24" DIPS DR 7.3 (320 PC)[1]
2" - 24" DIPS DR 9 (250 PC)
2" - 24" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Base-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	ASTM F714
4" - 24" IPS DR 7
4" - 18" IPS DR 7.3
20" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 19[2]
4" - 24" IPS DR 21
4" - 24" IPS DR 26
4" - 24" IPS DR 32.5
4" - 24" DIPS DR 7
4" - 24" DIPS DR 7.3[2]
4" - 24" DIPS DR 9
4" - 24" DIPS DR 11
4" - 24" DIPS DR 13.5
4" - 24" DIPS DR 15.5[2]
4" - 24" DIPS DR 17
4" - 24" DIPS DR 19[2]
4" - 24" DIPS DR 21
4" - 24" DIPS DR 26[2]
4" - 24" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	ASTM F714
4" - 24" IPS DR 7
4" - 18" IPS DR 7.3
20" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 19[2]
4" - 24" IPS DR 21
4" - 24" IPS DR 26
4" - 24" IPS DR 32.5
4" - 24" DIPS DR 7
4" - 24" DIPS DR 7.3[2]
4" - 24" DIPS DR 9
4" - 24" DIPS DR 11
4" - 24" DIPS DR 13.5
4" - 24" DIPS DR 15.5[2]
4" - 24" DIPS DR 17
4" - 24" DIPS DR 19[2]
4" - 24" DIPS DR 21
4" - 24" DIPS DR 26[2]
4" - 24" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	ASTM F714
4" - 24" IPS DR 7
4" - 18" IPS DR 7.3
20" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 19[2]
4" - 24" IPS DR 21
4" - 24" IPS DR 26
4" - 24" IPS DR 32.5
4" - 24" DIPS DR 7
4" - 24" DIPS DR 7.3[2]
4" - 24" DIPS DR 9
4" - 24" DIPS DR 11
4" - 24" DIPS DR 13.5
4" - 24" DIPS DR 15.5[2]
4" - 24" DIPS DR 17
4" - 24" DIPS DR 19[2]
4" - 24" DIPS DR 21
4" - 24" DIPS DR 26[2]
4" - 24" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	AWWA C906
4" - 24" IPS DR 7
4" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 19[2]
4" - 24" IPS DR 21
4" - 24" IPS DR 26[2]
4" - 24" IPS DR 32.5[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 24" DIOD DR 9
4" - 24" DIOD DR 11
4" - 24" DIOD DR 13.5
4" - 24" DIOD DR 15.5[2]
4" - 24" DIOD DR 17
4" - 24" DIOD DR 19[2]
4" - 24" DIOD DR 21
4" - 24" DIOD DR 26[2]
4" - 24" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	AWWA C906
4" - 24" IPS DR 7
4" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 19[2]
4" - 24" IPS DR 21
4" - 24" IPS DR 26[2]
4" - 24" IPS DR 32.5[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 24" DIOD DR 11
4" - 24" DIOD DR 9
4" - 24" DIOD DR 13.5
4" - 24" DIOD DR 15.5[2]
4" - 24" DIOD DR 17
4" - 24" DIOD DR 19[2]
4" - 24" DIOD DR 21
4" - 24" DIOD DR 26[2]
4" - 24" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	AWWA C906
4" - 24" IPS DR 7
4" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 19[2]
4" - 24" IPS DR 21
4" - 24" IPS DR 26[2]
4" - 24" IPS DR 32.5[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 24" DIOD DR 9
4" - 24" DIOD DR 11
4" - 24" DIOD DR 13.5
4" - 24" DIOD DR 15.5[2]
4" - 24" DIOD DR 17
4" - 24" DIOD DR 19[2]
4" - 24" DIOD DR 21
4" - 24" DIOD DR 26[2]
4" - 24" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Baystar - Bayport Polymers LLC
12212 Port Road
Pasadena, TX 77507
United States
281-474-6000
Visit this company's website

Facility : Pasadena, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710*	3	HDPE 4920N/BLK	ASTM D2513 445574C
PE 4710* ¢	3	HDPE 4920B	CSA B137.4 445574C
PE 4710*	3	HDPE 4920B	ASTM D2513 445574C
PE 4710* ¢	3	HDPE 4920N/BLK	CSA B137.4 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF’s prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710^ ++	3	HDPE 4920B	ASTM D3350 445574C
PE 4710^ ++	3	HDPE 4920N	ASTM D3350 445574A
PE 4710^ ++	3	HDPE 4920N/BLK	ASTM D3350 445574C
^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Braskem Idesa SAPI
Manuel Ávila Camacho, No. 36, Piso 24,
Lomas de Chaultepec II Sección, Delegaci
Ciudad de Mexico 11000
Mexico
52 556 234 1100
Visit this company's website

Facility : Veracruz, Mexico

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100+	1	HDP3049	ASTM D3350 445574A
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Centennial Plastics, Inc.
1830 Centennial Avenue
P.O. Box 329
Hastings, NE 68901
United States
866-851-2227
402-462-2227
Visit this company's website

Facility : Nampa, ID

Irrigation - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 3608/4710	ProTurf Black HDPE 80		*SE 30288*
1" SIDR 19
1 1/4" SIDR 19
1 1/2" SIDR 19
2" SIDR 19
Pipe	PE 3608/4710	ProTurf Black HDPE 100		*SE 30288*
3/4" SIDR 15
1" SIDR 15
1 1/4" SIDR 15
1 1/2" SIDR 15
Pipe	PE 3608/4710	ProTurf Green HDPE		*SE 30288*
1" SIDR 19
1 1/4" SIDR 19
Pipe	PE 3608/4710	ProTurf Green HDPE		*SE 30288*
3/4" SIDR 15
1" SIDR 15
1 1/4" SIDR 15
Pipe**	PE 2708	ProTurf Green MDPE		*SE 30288*
1" SIDR 19
1 1/4" SIDR 19
** These products also meet the requirements for PE 2406 per ASTM D3350-02.
Pipe	PE 3608/4710	Pro Turf Blue HDPE		*SE 30288*
3/4" - 1 1/2" SDR 15
1" - 1 1/2" SDR 19

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708	CenGas MDPE	ASTM D2513
1/2" CTS SDR 7
1/2" IPS SIDR 9.3
3/4" IPS SDR 11
1" IPS SDR 11
1" CTS SDR 11.5
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/2" IPS SDR 11
2" IPS SDR 11
3" IPS SDR 11
4" IPS SDR 11
6" IPS SDR 11
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ §	PE 3608/4710	CenCore HDPE	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
3/4" - 2" SIDR 11.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 3608/4710	CenCore HDPE CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 3608/4710	CenCore HDPE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 4710	CenFlo HDPE	ASTM D2239
1/2" - 2" SIDR 11.5[1]
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
3/4" - 2" SIDR 15[1]
1" - 2" SIDR 19[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 3608/4710	CenFlo HDPE CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 3608/4710	CenFlo HDPE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 3608/4710	CenFuse	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 3608, PE 4710	Cenfuse	AWWA C906
4" DR 9
4" DR 11
4" DR 13.5
4" DR 15.5[2]
4" DR 17
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 3608/4710	CenFuse	ASTM D3035
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11[1]
3/4" - 3" SDR 13.5[1]
2" - 3" SDR 17[1]
2" - 3" SDR 21[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ § [G]	PE 4710	CenFuse	ASTM D3035
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11[1]
3/4" - 3" SDR 13.5[1]
2" - 3" SDR 17[1]
2" - 3" SDR 21[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	Cenfuse	ASTM F714
4" - 6" SDR 7
4" - 6" SDR 9
4" - 6" SDR 11
4" - 6" SDR 13.5
4" - 6" SDR 15.5[2]
4" - 6" SDR 17
4" - 6" SDR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Cenfuse	ASTM F714
4" - 6" SDR 7
4" - 6" SDR 9
4" - 6" SDR 11
4" - 6" SDR 13.5
4" - 6" SDR 15.5[2]
4" - 6" SDR 17
4" - 6" SDR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 3608/4710	Cenfuse	ASTM D3035
3/4" - 3" SDR 17
Pipe	PE 4710	Cenfuse	ASTM D3035
3/4" - 3" SDR 17
Pipe	PE 3608/4710	Cenfuse	ASTM F714
4" - 6" SDR 17
Pipe	PE 4710	Cenfuse	ASTM F714
4" - 6" SDR 17

Facility : Hastings, NE

Irrigation - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 3608/4710	ProTurf Black HDPE 80		*SE 30288*
1" SIDR 19
1 1/4" SIDR 19
1 1/2" SIDR 19
2" SIDR 19
Pipe	PE 3608/4710	ProTurf Black HDPE 100		*SE 30288*
3/4" SIDR 15
1" SIDR 15
1 1/4" SIDR 15
1 1/2" SIDR 15
Pipe	PE 3608/4710	ProTurf Green HDPE		*SE 30288*
1" SIDR 19
1 1/4" SIDR 19
Pipe	PE 3608/4710	ProTurf Green HDPE		*SE 30288*
3/4" SIDR 15
1" SIDR 15
1 1/4" SIDR 15
Pipe**	PE 2708	ProTurf Green MDPE		*SE 30288*
1" SIDR 19
1 1/4" SIDR 19
** These products also meet the requirements for PE 2406 per ASTM D3350-02.
Pipe	PE 3608/4710	Pro Turf Blue HDPE		*SE 30288*
3/4" - 1 1/2" SDR 15
1" - 1 1/2" SDR 19

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708	CenGas MDPE	ASTM D2513
1/2" CTS SDR 7
1/2" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 11
1" CTS SDR 11.5
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/2" IPS SDR 11
2" IPS SDR 11
3" IPS SDR 11
4" IPS SDR 11
6" IPS SDR 11
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [G]	PE 3608/4710	CenCore HDPE	ASTM D2239
1/2" SIDR 11.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenCore HDPE	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
3/4" - 2" SIDR 11.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [G]	PE 3608/4710	CenCore HDPE	ASTM D2239
1" SIDR 19
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [G]	PE 4710	CenFlo HDPE	ASTM D2239
1/2" SIDR 7
1/2" SIDR 9
1/2" SIDR 11.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	CenFlo HDPE	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [G]	PE 4710	CenFlo HDPE	ASTM D2239
3/4" - 2" SIDR 11.5
3/4" - 2" SIDR 15
1" - 2" SIDR 19
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ * [1] [G]*	PE 2708	CenFlo MDPE	ASTM D2239
1/2" SIDR 11.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ** These products also meet the requirements for PE 2406 per ASTM D3350-02. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ * [G]*	PE 2708	CenFlo MDPE	ASTM D2239
3/4" - 2" SIDR 11.5[1]
3/4" - 1 1/4" SIDR 7
3/4" - 2" SIDR 15[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ** These products also meet the requirements for PE 2406 per ASTM D3350-02. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [1] [G]	PE 3608/4710	CenCore HDPE CTS	ASTM D2737
1/2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenCore HDPE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenFlo HDPE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenFuse	ASTM D3035
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11[1]
3/4" - 3" SDR 13.5[1]
3/4" - 3" SDR 15.5[1]
3/4" - 3" SDR 17[1]
1" - 3" SDR 21[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	CenFuse	ASTM D3035
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11[1]
3/4" - 3" SDR 13.5[1]
3/4" - 3" SDR 15.5[1]
3/4" - 3" SDR 17[1]
1" - 3" SDR 21[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenFuse	ASTM F714
4" - 6" SDR 7
4" - 6" SDR 9
4" - 6" SDR 11
4" - 6" SDR 13.5
4" - 6" SDR 15.5[2]
4" - 6" SDR 17
4" - 6" SDR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Cenfuse	ASTM F714
4" - 6" SDR 7
4" - 6" SDR 9
4" - 6" SDR 11
4" - 6" SDR 13.5
4" - 6" SDR 15.5[2]
4" - 6" SDR 17
4" - 6" SDR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CPL HDPE CTS	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CPL HDPE CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	CPL Potable Water	ASTM D2239
1/2" SIDR 9[1]
1/2" SIDR 15[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	CPL Potable Water	ASTM D2239
3/4" - 2" SIDR 9
3/4" - 2" SIDR 15[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenCore HDPE CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenFlo HDPE CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenFuse	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	CenFuse	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenFuse	AWWA C906
4", 6", 8", 10", 12" SDR 7
4", 6", 8", 10", 12" SDR 7.3[2]
4", 6", 8", 10", 12" SDR 9
4", 6", 8", 10", 12" SDR 9.3[2]
4", 6", 8", 10", 12" SDR 11
4", 6", 8", 10", 12" SDR 13.5
4", 6", 8", 10", 12" SDR 15.5[2]
4", 6", 8", 10", 12" SDR 17
4", 6", 8", 10", 12" SDR 21
4", 6", 8", 10", 12" SDR 26[2]
4", 6", 8", 10", 12" SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 3608/4710	Cenfuse	ASTM D3035
3/4" - 3" SDR 17
Pipe	PE 4710	Cenfuse	ASTM D3035
3/4" - 3" SDR 17
Pipe	PE 3608/4710	Cenfuse	ASTM F714
4" - 6" SDR 17
Pipe	PE 4710	Cenfuse	ASTM F714
4" - 6" SDR 17

Chevron Phillips Chemical Company, LP
9500 Lakeside Blvd.
The Woodlands, TX 77381
United States
832-813-4100
Visit this company's website

Facility : Pasadena, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708* ¢	3	Marlex® TR-418P8D	ASTM D2513 234373E
PE 80* ¢	3	Marlex® TR-418P8D	ASTM D2513 234375E
PE 2708* ¢	3	Marlex® TR-418P8D	CSA B137.4 234373E
PE 80* ¢	3	Marlex® TR-418P8D	CSA B137.4 234375E
PE 2708* ¢	3	Marlex® TR-418Q YL1	ASTM D2513 234373E
PE 2708* ¢	3	Marlex® TR-418Q YL1	CSA B137.4 234373E
PE 2708* ¢	3	Marlex® TR-418Q YL2	ASTM D2513 234373E
PE 80* ¢	3	Marlex® TR-418Q YL2	ASTM D2513 234375E
PE 2708* ¢	3	Marlex® TR-418Q YL2	CSA B137.4 234373E
PE 80* ¢	3	Marlex® TR-418Q YL2	CSA B137.4 234373E
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Facility : Sweeny, TX

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710	3	Marlex® H516HP BK	ASTM D3350 445574C
PE 4710	3	Marlex® TRB-432 BK	ASTM D3350 445574C
PE 4710	3	Marlex® TRB-437LS BK	ASTM D3350 445574C
PE 100	3	Marlex® TRB-437LS BK	ASTM D3350 445576C
PE 4710	3	Marlex® TRB-437LS G1	ASTM D3350 445574C
PE 100	3	Marlex® TRB-437LS G1	ASTM D3350 445576C
PE 4710	3	Marlex® TRB-437LS NT	ASTM D3350 445574A
PE 100	3	Marlex® TRB-437LS NT	ASTM D3350 445576A

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710* ¢	3	Marlex® H516HP BK	ASTM D2513 445574C
PE 4710* ¢	3	Marlex® H516HP BK	CSA B137.4 445574C
PE 4710* ¢	3	Marlex® TRB-432 BK	ASTM D2513 445574C
PE 4710* ¢	3	Marlex® TRB-432 BK	CSA B137.4 445574C
PE 4710* ¢	3	Marlex® TRB-432YL1	ASTM D2513 445574E
PE 4710* ¢	3	Marlex® TRB-432YL1	CSA B137.4 445574E
PE 4710* ¢	3	Marlex® TRB-432YL2	ASTM D2513 445574E
PE 4710* ¢	3	Marlex® TRB-432YL2	CSA B137.4 445574E
PE 100* ¢	3	Marlex® TRB-432YL2	CSA B137.4 445576E
PE 4710* ¢	3	Marlex® TRB-437LS BK	ASTM D2513 445574C
PE 4710* ¢	3	Marlex® TRB-437LS BK	CSA B137.4 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710$ + ^ ¢	3	Marlex® H516HP BK	ASTM D3350 445574C
PE 4710$ + ^ ¢	3	Marlex® H516HP BK	CSA B137.1 445574C
PE 4710$ + ^ ¢	3	Marlex® TRB-432 BK	ASTM D3350 445574C
PE 4710$ + ^ ¢	3	Marlex® TRB-432 BK	CSA B137.1 445574C
PE 4710$ + ^ ¢	3	Marlex® TRB-432YL1	ASTM D3350 445574E
PE 4710$ + ^ ¢	3	Marlex® TRB-432YL1	CSA B137.1 445574E
PE 4710$ + ^ ¢	3	Marlex® TRB-432YL1	ASTM D3350 445576E
PE 4710$ + ^ ¢	3	Marlex® TRB-437LS BK	ASTM D3350 445574C
PE 4710$ + ^ ¢	3	Marlex® TRB-437LS BK	CSA B137.1 445574C
PE 100$ + ^ ¢	3	Marlex® TRB-437LS BK	ASTM D3350 445576C
PE 4710$ & + ¢	3	Marlex® TRB-437LS G1	ASTM D3350 445574C
PE 4710$ & + ¢	3	Marlex® TRB-437LS G1	CSA B137.1 445574C
PE 4710$ & + ¢	3	Marlex® TRB-437LS G1	ASTM D3350 445576C
PE 4710$ + ^ ¢	3	Marlex® TRB-437LS NT	ASTM D3350 445574A
PE 4710$ + ^ ¢	3	Marlex® TRB-437LS NT	ASTM D3350 445576A
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. & Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Cresline Plastic Pipe Co., Inc.
600 Cross Pointe Boulevard
Evansville, IN 47715
United States
270-826-8317

Facility : Council Bluffs, IA

Irrigation - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 4710	Cresline® CE Blue®		*SE 30288*
3/4" - 2" SIDR 15
1" - 2" SIDR 19
Pipe	PE 4710	Cresline® HD		ASTM D2239
3/4" - 2" SIDR 15
1" - 2" SIDR 19

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Cresline® HD	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® HD-CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® HD-CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® CE Blue®	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Henderson, KY

Irrigation - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 4710	Cresline® HD		ASTM D2239
3/4" - 2" SIDR 15
1" - 2" SIDR 19
Pipe	PE 4710	Cresline® CE Blue®		*SE 30288*
3/4" - 2" SIDR 15
1" - 2" SIDR 19

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing+ [G]	PE 4710	Cresline® CE Blue®	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Cresline® HD	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® HD-CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® HD-CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Mechanicsburg, PA

Irrigation - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 4710	Cresline® HD		ASTM D2239
3/4" - 2" SIDR 15
1" - 2" SIDR 19
Pipe	PE 4710	Cresline® CE Blue®		*SE 30288*
3/4" - 2" SIDR 15
1" - 2" SIDR 19

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2737
3/4" - 2" SIDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® CE Blue®	AWWA C901
3/4" - 2" SIDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Cresline® HD	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® HD-CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® HD-CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

CRP Products & Manufacturing a division of EMCO Corporation
3001 84 Avenue
Edmonton, AB T6P 1K1
Canada
800-661-4054
780-449-1599
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Molded Butt Fittings+ §	PE 100/4710	CRP-PE 100/4710	ASTM D3261
Molded Butt 90° Elbow
3/4" - 12"
Molded Butt 45° Elbow
3/4" - 12"
Molded Butt Cap
3/4" - 12"
Molded Butt Flange Adapter
2" - 54"
Molded Butt Reducer
2" x 1 1/2" – 12" x 10"
Molded Butt Stub End
14" - 54"
Molded Butt Tee
3/4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Molded Butt Fittings+ §	PE 100/4710	CRP-PE 100/4710	AWWA C906
Molded Butt 45° Elbow
4" - 12"
Molded Butt 90° Elbow
4" - 12"
Molded Butt Cap
4" - 12"
Molded Butt Flange Adapter
4" - 54"
Molded Butt Reducer
4" x 2" - 12" x 10"
Molded Butt Stub End
14" - 54"
Molded Butt Tee
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Dow Chemical Company (The)
Regulatory Compliance
1803 Building
Midland, MI 48674
United States
979-238-5209
Visit this company's website

Facility : Hahnville, LA

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708/80* [1]	3	Continuum™ DGDA-2420 YL	ASTM D2513 237373E
PE 2708/80* [1]	3	Continuum™ DGDA-2420 YL	ASTM D3350 237373E
PE 2708/80* [1] [2]	3	Continuum™ DGDA-2420 YL2	ASTM D3350 277373E
PE 2708/80* [1] [2]	3	Continuum™ DGDA-2420 YL2	ASTM D2513 277373E
PE 4710*	3	Continuum™ DGDA-2490 BK GL	ASTM D3350 445574C
PE 100*	3	Continuum™ DGDA-2490 BK GL	ASTM D3350 445576C
PE 4710*	3	Continuum™ DGDA-2490 BK GL	ASTM D2513 445574C
PE 4710*	3	Continuum™ DGDA-2490 Black	ASTM D2513 445574C
PE 100*	3	Continuum™ DGDA-2490 Black	ASTM D3350 445576C
PE 4710*	3	Continuum™ DGDA-2490 Black	ASTM D3350 445574C
PE 4710*	3	Continuum™ DGDA-2490 NT	ASTM D3350 445574A
PE 4710*	3	Continuum™ DGDA-2490 YL	ASTM D2513 445574E
PE 4710*	3	Continuum™ DGDA-2490 YL	ASTM D3350 445574E
PE 4710*	3	Continuum™ DGDA-2490 YL2	ASTM D3350 445574E
PE 4710*	3	Continuum™ DGDA-2490 YL2	ASTM D2513 445574E
PE 100*	3	Continuum™ DGDA-2490 YL2	ASTM D3350 445576E
PE 4710*	3	Continuum™ DGDC-2490 BK	ASTM D3350 445574C
PE 4710*	3	Continuum™ DGDC-2490 BK	ASTM D2513 445574C
PE 4710*	3	Continuum™ DGDC-2490 YL2	ASTM D3350 445574E
PE 4710*	3	Continuum™ DGDC-2490 YL2	ASTM D2513 445574E
PE 100*	3	Continuum™ DGDC-2502 Black	ASTM D3350 445564C
PE 4710*	3	Continuum™ DGDC-2502 Black	ASTM D3350 445574C
PE 4710*	3	Continuum™ DGDC-2502 Black	ASTM D2513 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. [1] Flexural modulus is 95,000 - 125,000 psi. [2] Melt index is 0.05 - 0.25 g/10 min.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710+ ^	3	Continuum™ DGDA-2490 BK GL	ASTM D3350 445574C
PE 100+ ^	3	Continuum™ DGDA-2490 BK GL	ASTM D3350 445576C
PE 4710+ ^^^	3	Continuum™ DGDA-2490 BL	ASTM D3350 445574E
PE 100+ ^^	3	Continuum™ DGDA-2490 Black	ASTM D3350 445576C
PE 4710+ ^^	3	Continuum™ DGDA-2490 Black	ASTM D3350 445574C
PE 4710+ ^	3	Continuum™ DGDA-2490 GN	ASTM D3350 445574E
PE 4710+ ^ ^^^	3	Continuum™ DGDA-2490 GY	ASTM D3350 445574E
PE 4710+ ^^	3	Continuum™ DGDA-2490 NT	ASTM D3350 445574A
PE 4710+ ^^^	3	Continuum™ DGDA-2490 White	ASTM D3350 445574E
PE 100+ ^^	3	Continuum™ DGDA-2492 Black	ASTM D3350 445576C
PE 4710+ ^^	3	Continuum™ DGDA-2492 Black	ASTM D3350 445574C
PE 100+ ^^	3	Continuum™ DGDA-2502 Black	ASTM D3350 445576C
PE 4710+ ^^	3	Continuum™ DGDA-2502 Black	ASTM D3350 445574C
PE 4710+ ^^	3	Continuum™ DGDA-2502 NT	ASTM D3350 445574A
PE 4710+ ^^	3	Continuum™ DGDB-2490 Black	ASTM D3350 445574C
PE 100+ ^^	3	Continuum™ DGDB-2490 Black	ASTM D3350 445576C
PE 4710+ ^	3	Continuum™ DGDB-2490 NT	ASTM D3350 445574A
PE 4710+ ^^	3	Continuum™ DGDC-2480 Black	ASTM D3350 445574C
PE 4710+ ^^	3	Continuum™ DGDC-2480 NT	ASTM D3350 445574A
PE 4710+ ^^^	3	Continuum™ DGDC-2490 BK	ASTM D3350 445574C
PE 4710+ ^^^	3	Continuum™ DGDC-2490 BL	ASTM D3350 445574E
PE 4710+ ^^^	3	Continuum™ DGDC-2490 NT	ASTM D3350 445547A
PE 4710+ ^^^	3	Continuum™ DGDC-2490 WH	ASTM D3350 445574E
PE 4710+ ^^^	3	Continuum™ DGDC-2492 BK	ASTM D3350 445574C
PE 4710+ ^^^	3	Continuum™ DGDC-2502 Black	ASTM D3350 445574C
PE 100+ ^^^	3	Continuum™ DGDC-2502 Black	ASTM D3350 445574C
PE 4710+ ^^^	3	Continuum™ DGDC-2502 GY	ASTM D3350 445574E
PE 4710+ ^^^	3	Continuum™ DGDC-2502 NT	ASTM D3350 445574A
PE 4710+++ ^^^	3	HYPERTHERM 2399 Black	ASTM D3350 445574C
PE 4710+++ ^^^	3	INTREPID 2499 BK	ASTM D3350 445574C
% Meets the chlorine resistance requirements of ASTM F2769 (CL5) when tested in accordance with ASTM F2023. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. ^^ Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). ^^^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263.

Facility : North Seadrift, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100*	3	CONTINUUM™ DGDA-2490 Black	ASTM D3350 445574C
PE 4710*	3	CONTINUUM™ DGDA-2490 Black	ASTM D3350 445574C
PE 4710*	3	CONTINUUM™ DGDC-2490 BK	ASTM D2513 445574C
PE 4710*	3	CONTINUUM™ DGDC-2490 BK	ASTM D3350 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100* + ^^	3	CONTINUUM™ DGDA-2490 Black	ASTM D3350 445576C
PE 4710* + ^^	3	CONTINUUM™ DGDA-2490 Black	ASTM D3350 445574C
PE 3608* + ^	3	CONTINUUM™ DGDB-2480 Black	ASTM D3350 345464C
PE 3608* + ^	3	CONTINUUM™ DGDB-2480 NT	ASTM D3350 345464A
PE 4710* + ^ ^^	3	CONTINUUM™ DGDC-2490 BK	ASTM D3350 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. ^^ Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263.

Facility : Schkopau, Germany

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708* +++ [1] [2]	1	Dowlex® 2344	ASTM D3350 227273A
PE 80* +++ [3] [4]	1	Dowlex® 2388	ASTM D3350 227375
* 180°F +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Flexural modulus is 65,000 - 95,000 psi [2] Material meets the chlorine resistance requirement of ASTM F2623 when tested in accordance with ASTM F2023. [3] Material meets the requirement for ASTM F2769 chlorine resistance designation code CL5 class, when tested in accordance with ASTM F2023 test method. [4] Flexural modulus is 90,000 - 140,000 psi.

Facility : Terneuzen, The Netherlands

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708* +++ [1] [2]	1	Dowlex® 2344	ASTM D3350 227273A
PE 80* +++ [3] [4]	1	Dowlex® 2388	ASTM D3350 227375
* 180°F +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Flexural modulus is 65,000 - 95,000 psi [2] Material meets the chlorine resistance requirement of ASTM F2623 when tested in accordance with ASTM F2023. [3] Material meets the requirement for ASTM F2769 chlorine resistance designation code CL5 class, when tested in accordance with ASTM F2023 test method. [4] Flexural modulus is 90,000 - 140,000 psi.

Dynaflex Pipe Ltd.
2003 5th Street
Nisku, AB T9E 7X4
Canada
780-989-9970
Visit this company's website

Facility : Nisku, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Dynaflex Pipe	AWWA C901
3/4" SDR 9
1" SDR 9
1 1/4" SDR 9
1 1/2" SDR 9
2" SDR 9
3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Dynaflex Pipe	AWWA C906
4" - 24" DR 7
4" - 24" DR 9
4" - 24" DR 11
4" - 24" DR 13.5
4" - 24" DR 17
4" - 24" DR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Dynaflex Pipe	ASTM D3035
3/4" - 3" DR 7
3/4" - 3" DR 9
3/4" - 3" DR 11[1]
3/4" - 3" DR 13.5[1]
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
3/4" DR 21[1] [2]
1" - 3" DR 21[1]
3/4" DR 26[1] [2]
1" - 3" DR 26[1]
3/4" - 1 1/4" DR 32.5[1] [2]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Dynaflex Pipe	ASTM F714
4" - 24" DR 7
4" - 24" DR 9
4" - 24" DR 11
4" - 24" DR 13.5
4" - 24" DR 17
4" - 24" DR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ¢ [G]	PE 4710	Dynaflex Pipe	CSA B137.1
1 1/2" - 24" DR 7
1 1/2" - 24" DR 7.3
1 1/2" - 24" DR 9
1/2" - 24" DR 11
1" - 24" DR 13.5
1" - 24" DR 15.5
1/2" - 24" DR 17
1" - 24" DR 19
1 1/4" - 24" DR 21
6" - 24" DR 26
6" - 24" DR 32.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Encoma Ltd.
26082 Road 51 North
P.O. Box 219
Elm Creek, MB R0G 0N0
Canada
204-745-8920
Visit this company's website

Facility : Elm Creek, Manitoba, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Encoma	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Encoma	ASTM F714
4" - 6" DR 7
4" - 6" DR 9
4" - 6" DR 11
4" - 6" DR 13.5
4" - 6" DR 17
4" - 6" DR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Encoma	AWWA C901
3/4" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Encoma	CSA B137.1
1/2" - 6"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Geothermal Applications

Product Type	Material Type	Trade Name	Product Standard
Pipe ¢*	PE 4710	Encoma	CSA C448
3/4" - 2" SDR 9, 11, 13.5
2"- 1/2" SDR 11, 13.5
3" - 6" SDR 11, 13.5, 17
* Product meets the requirements of Section 5.2 Underground Piping Materials and Series Requirements of CSA C448. Installation in accordance with manufacturer's instructions and requirements of CSA C448. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe ¢*	PE 4710	Encoma	CSA B137.1
1/2" - 6"
* Product meets the requirements of Section 5.2 Underground Piping Materials and Series Requirements of CSA C448. Installation in accordance with manufacturer's instructions and requirements of CSA C448. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Equistar Chemicals, LP, a wholly-owned subsidiary of LyondellBasell
Polymers Division
1221 McKinney Street, Suite 1600
P.O. Box 2583
Houston, TX 77252-2583
United States
713-652-7200
Visit this company's website

Facility : Bay City, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710# *	3	Alathon® L4904 Black	ASTM D2513 445574C
PE 4710# * ¢	3	Alathon® L4904 Black	CSA B137.4 445574C
PE 4710# *	3	Alathon® L4904 Black	ASTM D3350 445574C
PE 4710 PLUS# * ¢	3	Alathon® L4904 Black	CSA B137.4 445584C
PE 100# * ¢	3	Alathon® L4904 Black	CSA B137.4 445586C
PE 100# *	3	Alathon® L4904 Black	ASTM D3350 445586C
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. * Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710# + ¢ ^^^	3	Alathon L4904LSC- Black	ASTM D3350 445574C
PE 100# + ^^^	3	Alathon L4904LSC- Black	ASTM D3350 445576C
PE 4710# + ¢ ^^^	3	Alathon L4904LSC- Black	CSA B137.1 445574C
PE 100# + ^^^	3	Alathon® L4904-Black	ASTM D3350 445576C
PE 4710# + ¢ ^^^	3	Alathon® L4904-Black	CSA B137.1 445574C
PE 100# + ^	3	Alathon® L4904-Black	ASTM D3350 445576C
PE 4710# + ^^^	3	Alathon® L4904-Black	ASTM D3350 445574C
PE 4710# + ^ ¢	3	Alathon® L4904-Black	CSA B137.1 445574C
PE 4710# + ^	3	Alathon® L4904-Black	ASTM D3350 445574C
PE 4710# + ^	3	Alathon® L4904LS-Black	ASTM D3350 445574C
PE 100# + ^^^	3	Alathon® L4904LS-Black	ASTM D3350 445576C
PE 4710# + ¢ ^^^	3	Alathon® L4904LS-Black	CSA B137.1 445574C
PE 4710# + ^^^	3	Alathon® L4904LS-Black	ASTM D3350 445574C
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC0 (unspecified) per Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ^^^ Material has a chlorine resistance rating of CC3 per Table 2 of ASTM D3350.

^^ Material has a chlorine resistance rating of CC1 per Table 2 of ASTM D3350.
^^^^ Material has a chlorine resistance rating of CC2 per Table 2 of ASTM D3350

Facility : La Porte, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100* ¢	3	Hyperzone HY4008 Black	CSA B137.4 445586C
PE 4710 PLUS* ¢	3	Hyperzone HY4008 Black	CSA B137.4 445584C
PE 4710 PLUS*	3	Hyperzone HY4008 Black	ASTM D2513 445584C
PE 4710 PLUS*	3	Hyperzone HY4008 Black	ASTM D3350 445584C
PE 100*	3	Hyperzone HY4008 Black	ASTM D3350 445586C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100# * + ^	3	Hyperzone HY4008 Black	ASTM D3350 445576C
PE 4710# * + ^	3	Hyperzone HY4008 Black	CSA B137.1 445574C
PE 4710# * + ^	3	Hyperzone HY4008 Black	ASTM D3350 445574C
PE 100# * + ^	3	HYPERZONE HY4008LSC Black	ASTM D3350 445576C
PE 4710# * + ^	3	HYPERZONE HY4008LSC-Black	ASTM D3350 445574C
PE 4710# * + ^	3	HYPERZONE HY4008LSC-Black	CSA B137.1 445574C
PE 100# * + ^	3	Hyperzone HY4008 Blue	ASTM D3350 445576C
PE 4710# * + ^	3	Hyperzone HY4008 Blue	CSA B137.1 445574C
PE 4710# * + ^	3	Hyperzone HY4008 Blue	ASTM D3350 445574C
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. * Material has a chlorine resistance rating of CC3 per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Product is authorized to bear the cNSF and or/ the CNSFus Mark.

ExxonMobil Product Solutions Company
22777 Springwoods Village Parkway
Spring, TX 77389
United States
832-624-9114

Facility : Mont Belvieu, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710*	1	ExxonMobil HD4966HL BK	ASTM D3350 445574C
PE 4710*	1	ExxonMobil HD4966HL BK	ASTM D2513 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization

Potable Water - Materials

Material Type

End Use

Trade Name

Product Standard

PE 4710+ ^ [1]

ExxonMobil HD4966HL BK

ASTM D3350 445574C

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Meets the chlorine resistance requirements of CC0 (unspecified) per Table 2 of ASTM
  D3350  when tested in accordance with ASTM F2263
[1] Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350.

Flying W Plastics Inc.
487 Vanhorn Drive
P.O. Box 759
Glenville, WV 26351
United States
304-462-5779
Visit this company's website

Facility : Glenville, WV

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	FLYING SPEC I	ASTM D3035
3/4" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	FLYING W SPEC I	AWWA C901
3/4" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	FLYING W SPEC II	ASTM F714
4" - 24" DR 7
4" - 24" DR 9
4" - 24" DR 11
4" - 24" DR 13.5
4" - 24" DR 17
4" - 24" DR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	FLYING W SPEC II	AWWA C906
4" - 24" DR 7
4" - 24" DR 9
4" - 24" DR 11
4" - 24" DR 13.5
4" - 24" DR 17
4" - 24" DR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	FLYING W TITAN BLUE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	FLYING W TITAN BLUE CTS	AWWA C901
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	FLYING W TITAN BLUE CTS	ASTM D3035
3/4" - 3" DR 7
3/4" - 3" DR 9
3/4" - 3" DR 11
3/4" - 3" DR 13.5
3/4" - 3" DR 17
3/4" DR 21
1" - 3" DR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	FLYING W TITAN BLUE CTS	ASTM F714
4" - 18" DR 7.3
20" - 24" DR 7.3
4" - 24" DR 7
4" - 24" DR 9
4" - 24" DR 11
4" - 24" DR 13.5
4" - 24" DR 15.5
4" - 24" DR 17
4" - 24" DR 21
4" - 24" DR 26
4" - 24" DR 32.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	FLYING W TITAN SUPREME	ASTM D2239
3/4" -2" SIDR 7
3/4" -2" SIDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	PRESSURE SERVICE	ASTM D3035
3/4" - 3" DR 7
3/4" - 3" DR 11
3/4" - 3" DR 13.5
3/4" - 3" DR 17
3/4" DR 21
1" - 3" DR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	PRESSURE SERVICE	ASTM F714
4" - 18" DR 7.3
20" - 24" DR 7.3
4" - 24" DR 15.5
4" - 24" DR 26
4" - 24" DR 32.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
    are not certified for use in applications where an oxidative resistance classification
    (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure the
    product is suitable for the intended application.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Formosa Plastics Corporation, Texas
201 Formosa Drive
P.O. Box 700
Point Comfort, TX 77978
United States
361-987-7960

Facility : Point Comfort, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708[1]	1	HP3902 YL2	ASTM D3350 237373 E
PE 2708[1]	1	HP3902 YL2	ASTM D2513 237373 E
PE 2708[1]	1	HP3902/PO2240	ASTM D2513 237373 E
PE 2708[1]	1	HP3902/PO2240	ASTM D3350 237373 E
PE 2708[1]	1	HP3902 YL	ASTM D3350 237373 E
PE 2708[1]	1	HP3902 YL	ASTM D2513 237373 E
[1] Flexural modulus is 95,000 - 125,000 psi.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710# ++	1	DE6210A	ASTM D3350 445574C
PE 4710¢ ++	1	DE6210A	CSA B137.1 445574C
PE 100# ++	1	DE6210A	ASTM D3350 445576C
PE 4710¢ ++	1	DE6210A/E6210A	CSA B137.1 445574C
PE 100# ++	1	DE6210A/E6210A	ASTM D3350 445576C
PE 4710# ++	1	DE6210A/E6210A	ASTM D3350 445574C
PE 4710# ++	1	E6210A	ASTM D3350 445576C
PE 4710# ++	1	E6210A	ASTM D3350 445574C
PE 4710¢ ++	1	E6210A	CSA B137.1 445574C
PE 4710¢ ++	1	E6210A-MD53542	CSA B137.1 445574C
PE 100# ++	1	E6210A-MD53542	ASTM D3350 445576C
PE 4710# ++	1	E6210A-MD53542	ASTM D3350 445574C
PE 100# ++	1	E6210A-PO2107	ASTM D3350 445576C
PE 4710¢ ++	1	E6210A-PO2107	CSA B137.1 445574C
PE 4710# ++	1	E6210A-PO2107	ASTM D3350 445574C
PE 4710¢ ++		E6210C	CSA B137.1 445574C
PE 4710## ++		E6210C	ASTM D3350 445574C
PE 4710## ++	1	E6210C BLK	ASTM D3350 445574C
PE 4710¢ ++	1	E6210C BLK	CSA B137.1 445574C
PE 4710¢ ++		E6210C BLK2	CSA B137.1 445574C
PE 4710## ++		E6210C BLK2	ASTM D3350 445574C
PE 4710++ ###	1	E6210F2 BLK	ASTM D3350 445574C
PE 4710¢ ++	1	E6210F2 BLK	CSA B137.1 445574C
PE 4710++ ###	1	E6210F2 BLK2	ASTM D3350 445574C
PE 4710¢ ++	1	E6210F2/MD53542	CSA B137.1 445574C
PE 4710++ ###	1	E6210F2/MD53542	ASTM D3350 445574C
PE 4710¢ ++	1	Formolene DE6210A	CSA B137.1 445574C
PE 4710# ++	1	Formolene DE6210A	ASTM D3350 445574C
PE 100# ++	1	Formolene DE6210A	ASTM D3350 445576C
PE 4710¢ ++	1	Formolene DE6210A/E6210A	CSA B137.1 445574C
PE 100# ++	1	Formolene DE6210A/E6210A	ASTM D3350 445576C
PE 4710# ++	1	Formolene DE6210A/E6210A	ASTM D3350 445574C
PE 4710¢ ++	1	Formolene E6210A	CSA B137.1 445574C
PE 4710# ++	1	Formolene E6210A	ASTM D3350 445574C
PE 100# ++	1	Formolene E6210A	ASTM D3350 445576C
PE 3608& + ^ ¢	1	Formolene HP4401	ASTM D3350 345464C
PE 3608& + ^ ¢	1	HP4401/AS4642	ASTM D3350 345464C
PE 3608& + ^ ¢	1	HP4401/AS4692	ASTM D3350 345464C
PE 3608& + ^ ¢	1	HP4401/MDPE-535-42	ASTM D3350 345464C
# Meets the chlorine resistance requirements of CC1 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. & Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. * Meets the material requirements of CSA B137.3 + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the material requirements of CSA B137.1 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ## Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). ### Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263.

Formtech LLC
7301 Klier Drive
Fairview, PA 16415
United States
814-474-1940
Visit this company's website

Facility : Fairview, PA

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PE 2708	Pro-Poly	ASTM D2513
3/4" - 2" IPS SDR 11
* Gas pipe and tubing limited to outside underground use only.
Pipe¢	PE 2708	Pro-Poly	CSA B137.4
3/4" - 2" IPS SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Guangdong Liansu Technology Industrial Co., Ltd. DBA Lesso America, Inc.
Liansu Industrial Estate
Longjiang Town, Shunde Zone
Foshan, Guangdong 528318
China
86 757 2388 8337
Visit this company's website

Facility : # 2 China

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# [7]	PE 4710	Lesso	ASTM F714
3/4"-24" DR 11 PE pipe
3/4"-24" DR 9 PE pipe
# This product may be marked with an alternate trade name: Liansu. [7] Certification includes the following: ASTM F714 DIPS DR11: LE111-030 3" LE111-040 4" LE111-050 5" LE111-060 6" LE111-070 7" LE111-080 8" LE111-100 10" LE111-120 12" LE111-140 14" LE111-160 16" LE111-180 18" LE111-200 20" LE111-220 22" LE111-240 24" ASTM F714 IPS DR11: LE121-040 4" LE121-050 5" LE121-060 6" LE121-070 7" LE121-080 8" LE121-100 10" LE121-120 12" LE121-140 14" LE121-160 16" LE121-180 18" LE121-200 20" LE121-220 22" LE121-240 24" ASTM F714 DIPS DR9: LE112-030 3" LE112-040 4" LE112-050 5" LE112-060 6" LE112-070 7" LE112-080 8" LE112-100 10" LE112-120 12" LE112-140 14" LE112-160 16" LE112-180 18" LE112-200 20" LE112-220 22" LE112-240 24" ASTM F714 IPS DR9: LE122-040 4" LE122-050 5" LE122-060 6" LE122-070 7" LE122-080 8" LE122-100 10" LE122-120 12" LE122-140 14" LE122-160 16" LE122-180 18" LE122-200 20" LE122-220 22" LE122-240 24"
Pipe# [8] [9]	PE 4710	Lesso	ASTM D3035
3/4"-24" DR 11 PE pipe
# This product may be marked with an alternate trade name: Liansu. [8] Certification includes the following: ASTM D3035 IPS DR11 [1]: LE022-007 3/4" LE022-010 1" LE022-012 1¼" LE022-015 1½" LE022-020 2" LE022-030 3" [9] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [G] [10]	PE 4710	Lesso	ASTM F714
3/4"-24" DR 11 PE pipe
3/4"-24" DR 9 PE pipe
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Certification includes the following: ASTM F714 DIPS DR11: LE111-030 3" LE111-040 4" LE111-050 5" LE111-060 6" LE111-070 7" LE111-080 8" LE111-100 10" LE111-120 12" LE111-140 14" LE111-160 16" LE111-180 18" LE111-200 20" LE111-220 22" LE111-240 24" ASTM F714 IPS DR11: LE121-040 4" LE121-050 5" LE121-060 6" LE121-070 7" LE121-080 8" LE121-100 10" LE121-120 12" LE121-140 14" LE121-160 16" LE121-180 18" LE121-200 20" LE121-220 22" LE121-240 24" ASTM F714 DIPS DR9: LE112-030 3" LE112-040 4" LE112-050 5" LE112-060 6" LE112-070 7" LE112-080 8" LE112-100 10" LE112-120 12" LE112-140 14" LE112-160 16" LE112-180 18" LE112-200 20" LE112-220 22" LE112-240 24" ASTM F714 IPS DR9: LE122-040 4" LE122-050 5" LE122-060 6" LE122-070 7" LE122-080 8" LE122-100 10" LE122-120 12" LE122-140 14" LE122-160 16" LE122-180 18" LE122-200 20" LE122-220 22" LE122-240 24"
Pipe# + [G] [11] [12]	PE 4710	Lesso	ASTM D3035
3/4"-24" DR 11 PE pipe
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [11] Certification includes the following: ASTM D3035 IPS DR11 LE022-007 3/4" LE022-010 1" LE022-012 1¼" LE022-015 1½" LE022-020 2" LE022-030 3" [12] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# [5]	PE 4710	Lesso	ASTM F714
3/4"-24" DR 11 PE pipe
3/4"-24" DR 9 PE pipe
# This product may be marked with an alternate trade name: Liansu. [5] Certification includes the following: ASTM F714 DIPS DR11: LE111-030 3" LE111-040 4" LE111-050 5" LE111-060 6" LE111-070 7" LE111-080 8" LE111-100 10" LE111-120 12" LE111-140 14" LE111-160 16" LE111-180 18" LE111-200 20" LE111-220 22" LE111-240 24" ASTM F714 IPS DR11: LE121-040 4" LE121-050 5" LE121-060 6" LE121-070 7" LE121-080 8" LE121-100 10" LE121-120 12" LE121-140 14" LE121-160 16" LE121-180 18" LE121-200 20" LE121-220 22" LE121-240 24" ASTM F714 DIPS DR9: LE112-030 3" LE112-040 4" LE112-050 5" LE112-060 6" LE112-070 7" LE112-080 8" LE112-100 10" LE112-120 12" LE112-140 14" LE112-160 16" LE112-180 18" LE112-200 20" LE112-220 22" LE112-240 24" ASTM F714 IPS DR9: LE122-040 4" LE122-050 5" LE122-060 6" LE122-070 7" LE122-080 8" LE122-100 10" LE122-120 12" LE122-140 14" LE122-160 16" LE122-180 18" LE122-200 20" LE122-220 22" LE122-240 24"
Pipe# [6] [7]	PE 4710	Lesso	ASTM D3035
3/4"-24" DR 11 PE pipe
# This product may be marked with an alternate trade name: Liansu. [6] Certification includes the following: ASTM D3035 IPS DR11 LE022-007 3/4" LE022-010 1" LE022-012 1¼" LE022-015 1½" LE022-020 2" LE022-030 3" [7] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.

Facility : Guangdong, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + § [1] [G]	PE 4710	Lesso	ASTM F714
4" - 65" IPS DR 11[2]
3" - 18" DIPS DR 11
[2] Certification includes the following: 4"-65" IPS DR11 PE pipe LE011-040 4" LE011-050 5" LE011-060 6" LE011-070 7" LE011-080 8" LE011-100 10" LE011-120 12" LE011-140 14" LE011-160 16" LE011-180 18" LE011-200 20" LE011-220 22" LE011-240 24" LE011-260 26" LE011-280 28" LE011-300 30" LE011-320 32" LE011-340 34" LE011-360 36" LE011-420 42" LE011-480 48" LE011-540 54" LE011-600 60" LE011-630 63" LE011-650 65" # This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Certification includes the following: LE011-030 3 in LE011-040 4 in LE011-060 6 in LE011-080 8 in LE011-100 10 in LE011-120 12 in LE011-180 18 in [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [1] [G]	PE 4710	Lesso	ASTM F714
4" - 65" IPS DR 11[2]
3" - 18" DIPS DR 11
[2] Certification includes the following: 4"-65" IPS DR11 PE pipe LE011-040 4" LE011-050 5" LE011-060 6" LE011-070 7" LE011-080 8" LE011-100 10" LE011-120 12" LE011-140 14" LE011-160 16" LE011-180 18" LE011-200 20" LE011-220 22" LE011-240 24" LE011-260 26" LE011-280 28" LE011-300 30" LE011-320 32" LE011-340 34" LE011-360 36" LE011-420 42" LE011-480 48" LE011-540 54" LE011-600 60" LE011-630 63" LE011-650 65" # This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certification includes the following: LE011-030 3 in LE011-040 4 in LE011-060 6 in LE011-080 8 in LE011-100 10 in LE011-120 12 in LE011-180 18 in [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Hanwha TotalEnergies Petrochemical Co., Ltd.
88, Yulgok-ro, Jongno-gu, Seoul
(INNO88 TOWER) 03131
Republic of Korea
82-41-660-6182
Visit this company's website

Facility : Seosan-Si, Chungcheongnam-Do, Korea, Republic of

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100* [1] [2]	1	XLS10B	ASTM D2513 445584C
PE 4710* [1] [2]	1	XLS10B	ASTM D2513 445584C
PE 100* [1] [2]	1	XLS10B	ASTM D3350 445584C
PE 4710* [1] [2]	1	XLS10B	ASTM D3350 445584C
PE 100* [1] [2]	1	XS10B	ASTM D2513/ASTM D335
PE 4710* [1] [2]	1	XS10B	ASTM D2513/ASTM D335
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. [1] Authorized for use in gas pipe with a wall thickness equal to or less than 250 mm SDR 11 (22.7 mm) based on RCP data. [2] PENT Cell Class = 8 (Client Specified - 2,000 hrs)

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100+ ^	1	XLS10B	ASTM D3350 445584C
PE 4710+ ^	1	XLS10B	ASTM D3350 445584C
PE 100# +	1	XS10B	ASTM D3350 445584C
PE 4710# +	1	XS10B	ASTM D3350 445584C
# Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350.

Ineos Olefins and Polymers USA, a Division of Ineos USA LLC.
Marina View Building
2600 South Shore Boulevard
Suite 500
League City, TX 77573
United States
800-338-0489
713-307-3760
Visit this company's website

Facility : # 1 Houston, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708***	3	K38-20-160	ASTM D2513 234373E
*** Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization.

Facility : # 2 Houston, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708***	3	K38-20-160	ASTM D2513 234373E
PE 2708***	3	K38-20X2399	ASTM D2513 234373E
*** Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100^ ++	3	TUB 121B	ASTM D3350 445576C
PE 4710^ ++	3	TUB 121B	ASTM D3350 445574C
^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Facility : # 3 USA

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100^ ++	3	TUB 121B	ASTM D3350 445576C
PE 4710^ ++	3	TUB 121B	ASTM D3350 445574C
^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Facility : La Porte, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710***	3	TUB 121	ASTM D2513 445574C
*** Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 3608& + **	3	K44-15-122	ASTM D3350 345464A
PE 3608& +	3	K44-15-123	ASTM D3350 345464C
PE 3608& +	1	K44-15-186	ASTM D3350 345464E
PE 100^ ++	3	TUB 121	ASTM D3350 445576C
PE 4710^ ++	3	TUB 121	ASTM D3350 445574C
PE 4710^ ** ++	3	TUB121N Natural	ASTM D3350 445574A
PE 4710^ ++	3	TUB 124 Blue	ASTM D3350 445574E
PE 4710 ^ ++	3	TUB 123 White	445574E ASTM D3350
& Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ** Natural Material ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

INEOS Services Belgium SA
Rue de Ransbeek, 310
1120 Brussels
Belgium
32 2264 2498
Visit this company's website

Facility : Antwerpen, Belgium

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
Potable Water - Materials
PE 100+ ^ [1]	1, 2	ELTEX Superstress TUB121N6000	ASTM D3350 447576C
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Material has a chlorine resistance rating of CC3 of ASTM D3350. [1] Flexural modulus is 135,000 - 185,000 psi

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Infra Pipe Solutions Ltd.
6750 Century Avenue
Unit 303
Mississauga, ON L5N 0B7
Canada
905-858-0206
Visit this company's website

Facility : Springfield, MO

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^	PE 4710	Base-Line	FM 1613
2" - 16" IPS DR 7 (335 PC)
2" - 16" IPS DR 7.3 (320 PC)[1]
2" - 16" IPS DR 9 (250 PC)
2" - 16" IPS DR 11 (200 PC)
2" - 16" DIPS DR 7 (335 PC)
2" - 16" DIPS DR 7.3 (320 PC)[1]
2" - 16" DIPS DR 9 (250 PC)
2" - 16" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ [G]	PE 4710	Base-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Base-Line	ASTM F714
4" - 16" IPS DR 7
4" - 16" IPS DR 7.3
4" - 16" IPS DR 9
4" - 16" IPS DR 11
4" - 16" IPS DR 13.5
4" - 16" IPS DR 15.5[2]
4" - 16" IPS DR 17
4" - 16" IPS DR 19[2]
4" - 16" IPS DR 21
4" - 16" IPS DR 26
4" - 16" IPS DR 32.5
4" - 16" DIPS DR 7
4" - 16" DIPS DR 7.3[2]
4" - 16" DIPS DR 9
4" - 16" DIPS DR 11
4" - 16" DIPS DR 13.5
4" - 16" DIPS DR 15.5[2]
4" - 16" DIPS DR 17
4" - 16" DIPS DR 19[2]
4" - 16" DIPS DR 21
4" - 16" DIPS DR 26[2]
4" - 16" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Base-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Base-Line	AWWA C906
4" - 16" IPS DR 7
4" - 16" IPS DR 7.3[2]
4" - 16" IPS DR 9
4" - 16" IPS DR 11
4" - 16" IPS DR 13.5
4" - 16" IPS DR 15.5[2]
4" - 16" IPS DR 17
4" - 16" IPS DR 19[2]
4" - 16" IPS DR 21
4" - 16" IPS DR 26[2]
4" - 16" IPS DR 32.5[2]
4" - 16" DIOD DR 7
4" - 16" DIOD DR 7.3[2]
4" - 16" DIOD DR 9
4" - 16" DIOD DR 11
4" - 16" DIOD DR 13.5
4" - 16" DIOD DR 15.5[2]
4" - 16" DIOD DR 17
4" - 16" DIOD DR 19[2]
4" - 16" DIOD DR 21
4" - 16" DIOD DR 26[2]
4" - 16" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Albuquerque, NM

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^	PE 4710	Base-Line	FM 1613
2" - 24" IPS DR 7 (335 PC)
2" - 24" IPS DR 7.3 (320 PC)[1]
2" - 24" IPS DR 9 (250 PC)
2" - 24" IPS DR 11 (200 PC)
2" - 24" DIPS DR 7 (335 PC)
2" - 24" DIPS DR 7.3 (320 PC)[1]
2" - 24" DIPS DR 9 (250 PC)
2" - 24" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ [G]	PE 4710	Base-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Base-Line	ASTM F714
4" - 24" IPS DR 7
4" - 18" IPS DR 7.3
20" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 19[2]
4" - 24" IPS DR 21
4" - 24" IPS DR 26
4" - 24" IPS DR 32.5
4" - 24" DIPS DR 7
4" - 24" DIPS DR 7.3[2]
4" - 24" DIPS DR 9
4" - 24" DIPS DR 11
4" - 24" DIPS DR 13.5
4" - 24" DIPS DR 15.5[2]
4" - 24" DIPS DR 17
4" - 24" DIPS DR 19[2]
4" - 24" DIPS DR 21
4" - 24" DIPS DR 26[2]
4" - 24" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Base-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Base-Line	AWWA C906
4" - 24" IPS DR 7
4" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 19[2]
4" - 24" IPS DR 21
4" - 24" IPS DR 26[2]
4" - 24" IPS DR 32.5[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 24" DIOD DR 9
4" - 24" DIOD DR 11
4" - 24" DIOD DR 13.5
4" - 24" DIOD DR 15.5[2]
4" - 24" DIOD DR 17
4" - 24" DIOD DR 19[2]
4" - 24" DIOD DR 21
4" - 24" DIOD DR 26[2]
4" - 24" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: Water-Line, Crystal-Line, Sclairpipe, EndoFlex, EndoPlus, EndoPure, EndoTrace, and/or Endopoly. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Oklahoma

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 9[1] [2]
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D2239
1" SIDR 5.3
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 3" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM F714
4" - 12" (IPS & DIPS) DR 9
4" - 12" (IPS & DIPS) DR 9.3[2]
4" - 12" (IPS & DIPS) DR 11
4" - 12" (IPS & DIPS) DR 13.5
4" - 12" (IPS & DIPS) DR 15.5[2]
4" - 12" (IPS & DIPS) DR 17
4" - 12" (IPS & DIPS) DR 21
4" - 12" (IPS & DIPS) DR 26[2]
4" - 12" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 4710	EndoPure	AWWA C901
3/4" - 3" SDR 9
* This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Greeneville, TN

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 9[1] [2]
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D2239
1" SIDR 5.3
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 3" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM F714
4" - 12" (IPS & DIPS) DR 9
4" - 12" (IPS & DIPS) DR 9.3[2]
4" - 12" (IPS & DIPS) DR 11
4" - 12" (IPS & DIPS) DR 13.5
4" - 12" (IPS & DIPS) DR 15.5[2]
4" - 12" (IPS & DIPS) DR 17
4" - 12" (IPS & DIPS) DR 21
4" - 12" (IPS & DIPS) DR 26[2]
4" - 12" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 4710	EndoPure	AWWA C901
3/4" - 3" SDR 9
* This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : New Jersey

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^ ¢	PE 2708	GAS MD	CSA B137.4
1/2" DR 8.8, 11, 13.5, 17, 21
3/4" DR 8.8, 11, 13.5, 17, 21
1" DR 8.8, 11, 13.5, 17, 21
1 1/4" DR 8.8, 10, 11, 13.5, 17, 21
1 1/2" DR 8.8, 11, 13.5, 17, 21
2" DR 8.8, 11, 13.5, 17, 21
2 1/2" DR 8.8, 11, 13.5, 17, 21
3" DR 8.8, 11, 13.5, 17, 21
4" DR 8.8, 11, 13.5, 17, 21
6" DR 8.8, 11, 13.5, 17, 21
8" DR 11, 13.5, 17, 21
10" DR 13.5, 17, 21
12" DR 13.5, 17, 21
14" DR 17, 21
16" DR 17, 21
18" DR 21
^ Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and or the cNSFus Mark.
Pipe^ ¢	PE 4710	GAS HD	CSA B137.4
1/2" DR 8.8, 11, 13.5, 17, 21
3/4" DR 8.8, 11, 13.5, 17, 21
1" DR 8.8, 11, 13.5, 17, 21
1 1/4" DR 8.8, 10, 11, 13.5, 17, 21
1 1/2" DR 8.8, 11, 13.5, 17, 21
2" DR 8.8, 11, 13.5, 17, 21
2 1/2" DR 8.8, 11, 13.5, 17, 21
3" DR 8.8, 11, 13.5, 17, 21
4" DR 8.8, 11, 13.5, 17, 21
6" DR 8.8, 11, 13.5, 17, 21
8" DR 11, 13.5, 17, 21
10" DR 13.5, 17, 21
12" DR 13.5, 17, 21
14" DR 17, 21
16" DR 17, 21
18" DR 21
^ Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and or the cNSFus Mark.
Tubing^ ¢	PE 2708	GAS MD	CSA B137.4
1/4" CTS
3/8" CTS
1/2" CTS
3/4" CTS
1" CTS
1-1/4" CTS
^ Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and or the cNSFus Mark.
Tubing^ ¢	PE 4710	GAS HD	CSA B137.4
1/4" CTS
3/8" CTS
1/2" CTS
3/4" CTS
1" CTS
1-1/4" CTS
^ Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and or the cNSFus Mark.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 9[1] [2]
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D2239
1" SIDR 5.3
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 3" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 3408/4710	EndoPure	ASTM F714
4" - 12" (IPS & DIPS) DR 9
4" - 12" (IPS & DIPS) DR 9.3[2]
4" - 12" (IPS & DIPS) DR 11
4" - 12" (IPS & DIPS) DR 13.5
4" - 12" (IPS & DIPS) DR 15.5[2]
4" - 12" (IPS & DIPS) DR 17
4" - 12" (IPS & DIPS) DR 21
4" - 12" (IPS & DIPS) DR 26[2]
4" - 12" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 4710	EndoPure	AWWA C901
3/4" - 3" SDR 9
* This product may be marked with an alternate trade name: EndoPoly, EndoFlex, EndoPure Reclaim, EndoPure Sewer, EndoPoly Geothermal, Sclairpipe, and/or Weholite. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Huntsville, Ontario, Canada

Drain - Pipe and Fittings

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe ¢*	PE 4710	GAS HD	CSA B137.4
1/2” NPS DR 8.8, 11, 13.5, 17, 21
3/4” NPS DR 8.8, 11, 13.5, 17, 21
1” NPS DR 8.8, 11, 13.5, 17, 21
1 1/4” NPS DR 8.8, 10, 11, 13.5, 17, 21
1 1/2” NPS DR 8.8, 11, 13.5, 17, 21
2” NPS DR 8.8, 11, 13.5, 17, 21
2 1/2” NPS DR 8.8, 11, 13.5, 17, 21
3” NPS DR 8.8, 11, 13.5, 17, 21
4” NPS DR 8.8, 11, 13.5, 17, 21
6” NPS DR 8.8, 11, 13.5, 17, 21
8” NPS DR 8.8, 11, 13.5, 17, 21
10” NPS DR 8.8, 11, 13.5, 17, 21
12” NPS DR 8.8, 11, 13.5, 17, 21
14” NPS DR 8.8, 11, 13.5, 17, 21
16” NPS DR 8.8, 11, 13.5, 17, 21
N/A DR 21
1/4" NTS
3/8" NTS
1/2" NTS
3/4" NTS
1" NTS
1 1/4" NTS
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe ¢*	PE 2708	GAS MD	CSA B137.4
1/2” NPS DR 8.8, 11, 13.5, 17, 21
3/4” NPS DR 8.8, 11, 13.5, 17, 21
1” NPS DR 8.8, 11, 13.5, 17, 21
1 1/4” NPS DR 8.8, 10, 11, 13.5, 17, 21
1 1/2” NPS DR 8.8, 11, 13.5, 17, 21
2” NPS DR 8.8, 11, 13.5, 17, 21
2 1/2” NPS DR 8.8, 11, 13.5, 17, 21
3” NPS DR 8.8, 11, 13.5, 17, 21
4” NPS DR 8.8, 11, 13.5, 17, 21
6” NPS DR 8.8, 11, 13.5, 17, 21
8” NPS DR 11, 13.5, 17, 21
10” NPS DR 13.5, 17, 21
12” NPS DR 13.5, 17, 21
14” NPS DR 17, 21
16” NPS DR 17, 21
18" NPS DR 21
1/4" NTS
3/8" NTS
1/2" NTS
3/4" NTS
1" NTS
1 1/4" NTS
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ + ^	PE 3608/4710	Sclairpipe	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 9.3[1] [2]
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1 1/4" DR 32.5[1] [2]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: EndoFlex, EndoPlus, Endopoly, EndoPure, and/or EndoTrace
Pipe$ + ^	PE 3608/4710	Sclairpipe	ASTM F714
4" - 63" (IPS & DIPS) DR 7[2]
4" - 63" (IPS & DIPS) DR 7.3[2]
4" - 63" (IPS & DIPS) DR 9[2]
4" - 63" (IPS & DIPS) DR 9.3[2]
4" - 63" (IPS & DIPS) DR 11[2]
4" - 63" (IPS & DIPS) DR 13.5[2]
4" - 63" (IPS & DIPS) DR 14.5[2]
4" - 63" (IPS & DIPS) DR 15.5[2]
4" - 63" (IPS & DIPS) DR 17[2]
4" - 63" (IPS & DIPS) DR 21[2]
4" - 63" (IPS & DIPS) DR 26[2]
4" - 63" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: EndoFlex, EndoPlus, Endopoly, EndoPure, and/or EndoTrace
Pipe$ +	PE 4710	Sclairpipe	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe$ + [2]	PE 4710	Sclairpipe	AWWA C906
4" - 63" SDR 7
4" - 63" SDR 7.3
4" - 63" SDR 9
4" - 63" SDR 9.3
4" - 63" SDR 11
4" - 63" SDR 13.5
4" - 63" SDR 14.5
4" - 63" SDR 15.5
4" - 63" SDR 17
4" - 63" SDR 21
4" - 63" SDR 26
4" - 63" SDR 32.5
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application.
Pipe^	PE 3608/4710	Sclairpipe	CSA B137.1
1/2" - 65"
^ This product may be marked with an alternate trade name: EndoFlex, EndoPlus, Endopoly, EndoPure, and/or EndoTrace

Sewer Main - Pipe and Fittings

Facility : Saskatoon, Saskatchewan, Canada

Drain - Pipe and Fittings

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe ¢*	PE 4710	GAS HD	CSA B137.4
1/2” NPS DR 8.8, 11, 13.5, 17, 21
3/4” NPS DR 8.8, 11, 13.5, 17, 21
1” NPS DR 8.8, 11, 13.5, 17, 21
1 1/4” NPS DR 8.8, 10, 11, 13.5, 17, 21
1 1/2” NPS DR 8.8, 11, 13.5, 17, 21
2” NPS DR 8.8, 11, 13.5, 17, 21
2 1/2” NPS DR 8.8, 11, 13.5, 17, 21
3” NPS DR 8.8, 11, 13.5, 17, 21
4” NPS DR 8.8, 11, 13.5, 17, 21
6” NPS DR 8.8, 11, 13.5, 17, 21
8” NPS DR 8.8, 11, 13.5, 17, 21
10” NPS DR 8.8, 11, 13.5, 17, 21
12” NPS DR 8.8, 11, 13.5, 17, 21
14” NPS DR 8.8, 11, 13.5, 17, 21
16” NPS DR 8.8, 11, 13.5, 17, 21
18" NPS DR 21
1/4" NTS
3/8" NTS
1/2" NTS
3/4" NTS
1" NTS
1 1/4" NTS
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe ¢*	PE 2708	GAS MD	CSA B137.4
1/2” NPS DR 8.8, 11, 13.5, 17, 21
3/4” NPS DR 8.8, 11, 13.5, 17, 21
1” NPS DR 8.8, 11, 13.5, 17, 21
1 1/4” NPS DR 8.8, 10, 11, 13.5, 17, 21
1 1/2” NPS DR 8.8, 11, 13.5, 17, 21
2” NPS DR 8.8, 11, 13.5, 17, 21
2 1/2” NPS DR 8.8, 11, 13.5, 17, 21
3” NPS DR 8.8, 11, 13.5, 17, 21
4” NPS DR 8.8, 11, 13.5, 17, 21
6” NPS DR 8.8, 11, 13.5, 17, 21
8” NPS DR 11, 13.5, 17, 21
10” NPS DR 13.5, 17, 21
12” NPS DR 13.5, 17, 21
14” NPS DR 17, 21
16” NPS DR 17, 21
18" NPS DR 21
1/4" NTS
3/8" NTS
1/2" NTS
3/4" NTS
1" NTS
1 1/4" NTS
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [2]*	PE 4710	Sclairpipe	AWWA C906
4" - 63" SDR 7
4" - 63" SDR 7.3
4" - 63" SDR 9
4" - 63" SDR 9.3
4" - 63" SDR 11
4" - 63" SDR 13.5
4" - 63" SDR 14.5
4" - 63" SDR 15.5
4" - 63" SDR 17
4" - 63" SDR 21
4" - 63" SDR 26
4" - 63" SDR 32.5
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application.
Pipe + ^*	PE 3608/4710	Sclairpipe	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 9.3[1] [2]
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1 1/4" DR 32.5[1] [2]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: EndoFlex, EndoPlus, Endopoly, EndoPure, and/or EndoTrace
Pipe + ^*	PE 3608/4710	Sclairpipe	ASTM F714
4" - 63" (IPS & DIPS) DR 7[2]
4" - 63" (IPS & DIPS) DR 7.3[2]
4" - 63" (IPS & DIPS) DR 9[2]
4" - 63" (IPS & DIPS) DR 9.3[2]
4" - 63" (IPS & DIPS) DR 11[2]
4" - 63" (IPS & DIPS) DR 13.5[2]
4" - 63" (IPS & DIPS) DR 14.5[2]
4" - 63" (IPS & DIPS) DR 15.5[2]
4" - 63" (IPS & DIPS) DR 17[2]
4" - 63" (IPS & DIPS) DR 21[2]
4" - 63" (IPS & DIPS) DR 26[2]
4" - 63" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: EndoFlex, EndoPlus, Endopoly, EndoPure, and/or EndoTrace
Pipe +*	PE 4710	Sclairpipe	AWWA C901
3/4" - 3" SDR 9
* These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe^	PE 3608/4710	Sclairpipe	CSA B137.1
1/2" - 65"
^ This product may be marked with an alternate trade name: EndoFlex, EndoPlus, Endopoly, EndoPure, and/or EndoTrace

Sewer Main - Pipe and Fittings

International Pipe Inc.
605 Mercy Street
P.O. Box 157
Selkirk, MB R1A 2B2
Canada
888-482-4675
204-482-4675

Facility : Selkirk, Manitoba, Canada

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe ~*	PE 2708	IP-G or IPG	CSA B137.4
3/4" - 8" IPS, Series 100
3/4" - 8" IPS, Series 125
3/4" - 8" IPS, Series 160
* Gas pipe and tubing limited to outside underground use only. ~ Product is authorized to bear the cNSF Mark.
Tubing ~*	PE 2708	IP-G or IPG	CSA B137.4
1/2", 1"
* Gas pipe and tubing limited to outside underground use only. ~ Product is authorized to bear the cNSF Mark.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ ¢ ++	PE 4710	IP-T or IPT	CSA B137.1
1/2" - 4" Series 50	1/2" - 4" Series 60	1/2" - 4" Series 75	1/2" - 4" Series 80
1/2" - 4" Series 100	1/2" - 4" Series 125	1/2" - 4" Series 150	1/2" - 4" Series 200
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Geothermal Applications

Product Type	Material Type	Trade Name	Product Standard
Pipe$ ¢	PE 3608	IP-A or IPA	CSA B137.1
3" Series 100, Series 125, Series 160, Series 200
4" Series 100, Series 125, Series 160, Series 200
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe	PE 4710	IP-T or IPT	CSA B137.1
3/4" Series 160, Series 200
1" Series 125, Series 160, Series 200
1 1/4" Series 125, Series 160, Series 200
1 1/2" Series 125, Series 160, Series 200
2" Series 100, Series 125, Series 160, Series 200
3" Series 100, Series 125, Series 160, Series 200
4" Series 100, Series 125, Series 160, Series 200

Interstate Plastic, Inc.
P.O. Box 398
Post Falls, ID 83854
United States
208-773-4538

Facility : Post Falls, ID

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ + [G]	PE 3608/4710	INTERSTATE	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 3" SIDR 11.5[1]
3/4" - 2" SIDR 15[1]
3/4" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 3608/4710	INTERSTATE	ASTM D3035
3/4" - 2" DR 7
3/4" - 3" DR 9
3/4" - 3" DR 11[1]
3/4" - 3" DR 13.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 3608/4710	INTERSTATE	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 3608/4710	Interstate Super Service Blue	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 3608/4710	Interstate Super Service Blue	ASTM D3035
3/4" - 2" DR 9
3/4" - 2" DR 11[1]
3/4" - 3" DR 13.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 3608/4710	Interstate Super Service Blue	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

IPEX Incorporated
3 Place Du Commerce, Suite 101
Île-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Edmonton, Alberta, Canada

Electrical Conduit and Accessories

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ [G]	PE 4710	IPEX Inc	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	IPEX Inc	AWWA C901
3/4" - 3" SDR 9 (PC250)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	IPEX Inc	AWWA C906
4" - 12" DR 7 (PC335)
4" - 12" DR 9 (PC250)
4" - 12" DR 13.5 (PC160)
4" - 12" DR 17 (PC125)
4" - 12" DR 11 (PC200)
4" - 12" DR 21 (PC100)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	IPEX Inc	ASTM F714
4" - 12" DR 21
4" - 12" DR 13.5
4" - 12" DR 11
4" - 12" DR 7
4" - 12" DR 9
4" - 12" DR 7.3
4" - 12" DR 17
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ ¢ [G]	PE 4710	IPEX Inc	CSA B137.1
1/2" - 6" Series 100
1/2" - 6" Series 125
1/2" - 6" Series 160
1/2" - 6" Series 200
1/2" - 6" Series 250
1/2" - 6" Series 60
1/2" - 6" Series 75
1/2" - 6" Series 80
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are NSF Certified.

Geothermal Applications

Product Type	Material Type	Trade Name	Product Standard
Pipe# ^ ¢	PE 4710	IPEX Inc	CSA C448
3/4" - 2" Series 200
# Product meets the requirements of Section 5.2 Underground Piping Materials and Series Requirements of CSA C448. Installation in accordance with manufacturer's instructions and requirements of CSA C448. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe^ ¢	PE 4710	IPEX Inc	CSA B137.1
1/2" - 2" Series 250
3/4" - 2" SDR 11
3/4" - 2" Series 200
^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark are NSF Certified.

IPEX USA LLC
3 Place Du Commerce, Suite 101
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Kingman, AZ

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe § [1] [2] [3]*	PE 2708	HOME-FLEX UNDERGROUND	ASTM D2513
1/2" DR 9.33
3/4" DR 11
1" DR 11
1-1/4" DR 10
1-1/4" DR 11
1-1/2" DR 11
2" DR 11
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is Certified to the International Fuel Gas Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Fuel Gas Code™. [2] Product is Certified to NFPA 54: National Fuel Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 54: National Fuel Gas Code. [3] Product is Certified to NFPA 58: Liquified Petroleum Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 58: Liquified Petroleum Gas Code.
Tubing § [1] [2] [3]*	PE 2708	HOME-FLEX UNDERGROUND	ASTM D2513
1/4" - 1-3/4" CTS
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is Certified to the International Fuel Gas Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Fuel Gas Code™. [2] Product is Certified to NFPA 54: National Fuel Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 54: National Fuel Gas Code. [3] Product is Certified to NFPA 58: Liquified Petroleum Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 58: Liquified Petroleum Gas Code.

Facility : Asheville, NC

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe! § [1] [2] [3]*	PE 2708	HOME-FLEX UNDERGROUND	ASTM D2513
1/2" CTS SDR 7
1/2" IPS SDR 9.33
3/4" CTS SDR 11.5
3/4" IPS SDR 11
1" CTS SDR 11.5
1" CTS SDR 12.5
1" IPS SDR 11
1 1/4" CTS SDR 11.5
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/2" IPS SDR 11
2" IPS SDR 11
3" IPS SDR 11
4" IPS SDR 11
! Product may or may not bear the NSF U.P. Code marking. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is Certified to the International Fuel Gas Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Fuel Gas Code™. [2] Product is Certified to NFPA 54: National Fuel Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 54: National Fuel Gas Code. [3] Product is Certified to NFPA 58: Liquified Petroleum Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 58: Liquified Petroleum Gas Code.
Pipe! § [1] [2] [3]*	PE 2708	Silver-Line	ASTM D2513
1/2" CTS SDR 7
1/2" IPS SDR 9.33
3/4" CTS SDR 11.5
3/4" IPS SDR 11
1" CTS SDR 11.5
1" CTS SDR 12.5
1" IPS SDR 11
1 1/4" CTS SDR 11.5
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/2" IPS SDR 11
2" IPS SDR 11
3" IPS SDR 11
4" IPS SDR 11
! Product may or may not bear the NSF U.P. Code marking. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is Certified to the International Fuel Gas Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Fuel Gas Code™. [2] Product is Certified to NFPA 54: National Fuel Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 54: National Fuel Gas Code. [3] Product is Certified to NFPA 58: Liquified Petroleum Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 58: Liquified Petroleum Gas Code.
Pipe! § [1] [2] [3]*	PE 2708	IPEX	ASTM D2513
1/2" CTS SDR 7
1/2" IPS SDR 9.33
3/4" CTS SDR 11.5
3/4" IPS SDR 11
1" CTS SDR 11.5
1" CTS SDR 12.5
1" IPS SDR 11
1 1/4" CTS SDR 11.5
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/2" IPS SDR 11
2" IPS SDR 11
3" IPS SDR 11
4" IPS SDR 11
! Product may or may not bear the NSF U.P. Code marking. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is Certified to the International Fuel Gas Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the International Fuel Gas Code™. [2] Product is Certified to NFPA 54: National Fuel Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 54: National Fuel Gas Code. [3] Product is Certified to NFPA 58: Liquified Petroleum Gas Code. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of NFPA 58: Liquified Petroleum Gas Code.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM D2737
1/2" SDR 9[2]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Ultra-Pure	ASTM D2737
1/2" SDR 9[2]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM D2239
1/2" SIDR 7[2]
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" SIDR 9[2]
1/2" - 2" SIDR 11.5[2]
1/2" - 2" SIDR 15[2]
1/2" - 2" SIDR 19[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Ultra-Pure	ASTM D2239
1/2" SIDR 7[2]
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" SIDR 9[2]
1/2" - 2" SIDR 11.5[2]
1/2" - 2" SIDR 15[2]
1/2" - 2" SIDR 19[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM D3035
1/2" SDR 9[2]
3/4" - 2" SDR 9
1/2" - 3" SDR 11[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Ultra-Pure	ASTM D3035
1/2" SDR 9[2]
3/4" - 2" SDR 9
1/2" - 3" SDR 11[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM F714
4" DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	ULTRA-Pure	ASTM F714
4" DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

J-M Manufacturing Co., Inc. DBA JM Eagle
9 Peach Tree Hill Road
Livingston, NJ 07039
United States
310-693-8200
Visit this company's website

Facility : # 1 Adel, GA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# +*	PE 4710	JM Eagle	FM 1613
IPS 4" - 24" (PC 335) DR 7
IPS 4" - 24" (PC 250) DR 9
IPS 4" - 24" (PC 200) DR 11
DIOD 4" - 24" (PC 335) DR 7
DIOD 4" - 24" (PC 250) DR 9
DIOD 4" - 24" (PC 200) DR 11
# This product may be marked with an alternate trade name: J-M Manufacturing, JM Eagle, [JM Eagle Logo], [JMM Logo] - J-M Manufacturing. * Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73F.

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708 / PE 4710	JM Eagle	ASTM D2513
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1" CTS SDR 11.5
1" CTS SDR 12.5
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
1/2" IPS SDR 9.3
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 9.3
1" IPS SDR 9.9
1" IPS SDR 11
1" IPS SDR 13.5
1 1/4" IPS SDR 6
1 1/4" IPS SDR 9.3
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 9.3
2" IPS SDR 11
2" IPS SDR 11.5
2" IPS SDR 13.5
2 1/2" IPS SDR 11
2 1/2" IPS SDR 17
2 1/2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 11.5
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 9.3
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 11.5
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 11.5
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
10" IPS SDR 11
10" IPS SDR 11.5
10" IPS SDR 13.5
10" IPS SDR 15.5
10" IPS SDR 17
14" IPS SDR 17
10" IPS SDR 21
12" IPS SDR 7
12" IPS SDR 11
12" IPS SDR 11.5
12" IPS SDR 13.5
12" IPS SDR 17
12" IPS SDR 21
14" IPS SDR 11
14" IPS SDR 11.5
14" IPS SDR 13.5
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 11.5
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 11.5
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 11.5
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM F714
IPS 4" - 65"[2]
DIPS 3" - 60"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D3035
1/2" DR 7
3/4" - 3" DR 7
1/2" DR 9
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 63"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe# *	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
# This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], and/or [J-M Manufacturing Logo]. * Certified product is solid wall, non-perforated pipe.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 63"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 7 Hastings, NE

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^ +*	PE 4710	JM Eagle	FM 1613
IPS 4" - 24" (PC 335) DR 7
IPS 4" - 24" (PC 250) DR 9
IPS 4" - 24" (PC 200) DR 11
DIOD 4" - 24" (PC 335) DR 7
DIOD 4" - 24" (PC 250) DR 9
DIOD 4" - 24" (PC 200) DR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], and/or [JMM Logo]. * Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73F.

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708 / PE 4710	JM Eagle	ASTM D2513
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1" CTS SDR 11.5
1" CTS SDR 12.5
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
1/2" IPS SDR 9.3
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 9.3
1" IPS SDR 9.9
1" IPS SDR 11
1" IPS SDR 13.5
1 1/4" IPS SDR 6
1 1/4" IPS SDR 9.3
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 9.3
2" IPS SDR 11
2" IPS SDR 11.5
2" IPS SDR 13.5
2 1/2" IPS SDR 11
2 1/2" IPS SDR 13.5
2 1/2" IPS SDR 17
2 1/2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 11.5
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 9.3
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 11.5
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 11.5
8" IPS SDR 13.5
8" IPS SDR 21
8" IPS SDR 17
10" IPS SDR 11
10" IPS SDR 11.5
10" IPS SDR 13.5
10" IPS SDR 15.5
10" IPS SDR 17
10" IPS SDR 21
12" IPS SDR 7
12" IPS SDR 11
12" IPS SDR 11.5
12" IPS SDR 13.5
12" IPS SDR 17
12" IPS SDR 21
14" IPS SDR 11
14" IPS SDR 11.5
14" IPS SDR 13.5
14" IPS SDR 17
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 11.5
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 11.5
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 11.5
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark are Certified.

Oil and Gas Producing Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	ASTM F2619
1/2" - 24" SDR 7
1/2" - 24" SIDR 7.3
1/2" - 30" SDR 9
1/2" - 36" SDR 11
1/2" - 42" SDR 13.5
2" - 54" SDR 17
3" - 63" SDR 21
6" - 63" SDR 26
6" - 63" SDR 32.5
^ This product may be marked with an alternate trade name: JM Eagle or [JM Eagle Logo].

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM F714
IPS 4" - 65"[2]
DIPS 3" - 60"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: J-M Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 8 Kingman, AZ

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^ +*	PE 4710	JM Eagle	FM 1613
IPS 4" - 24" (PC 335) DR 7
IPS 4" - 24" (PC 250) DR 9
IPS 4" - 24" (PC 200) DR 11
DIOD 4" - 24" (PC 335) DR 7
DIOD 4" - 24" (PC 250) DR 9
DIOD 4" - 24" (PC 200) DR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], and/or [JMM Logo]. * Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73F.

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708 / PE 4710	JM Eagle	ASTM D2513
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1" CTS SDR 11.5
1" CTS SDR 12.5
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
1/2" IPS SDR 9.3
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 9.3
1" IPS SDR 9.9
1" IPS SDR 11
1" IPS SDR 13.5
1 1/4" IPS SDR 6
1 1/4" IPS SDR 9.3
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 9.3
2" IPS SDR 11
2" IPS SDR 11.5
2" IPS SDR 13.5
2 1/2" IPS SDR 11
2 1/2" IPS SDR 13.5
2 1/2" IPS SDR 17
2 1/2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 11.5
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 9.3
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 11.5
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 11.5
8" IPS SDR 13.5
8" IPS SDR 21
8" IPS SDR 17
10" IPS SDR 11
10" IPS SDR 11.5
10" IPS SDR 13.5
10" IPS SDR 15.5
10" IPS SDR 17
10" IPS SDR 21
12" IPS SDR 7
12" IPS SDR 11
12" IPS SDR 11.5
12" IPS SDR 13.5
12" IPS SDR 17
12" IPS SDR 21
14" IPS SDR 11
14" IPS SDR 11.5
14" IPS SDR 13.5
14" IPS SDR 17
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 11.5
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 11.5
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 11.5
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26
1" - 3" DR 26[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM F714
IPS 4" - 65"[2]
DIPS 3" - 60"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	J-M Manufacturing	AWWA C906
4" - 65" [2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
3" - 18" SDR 7.3
3" - 20" SDR 8.3
3" - 24" SDR 9
3" - 30" SDR 9.3
3" - 36" SDR 11
3" - 36" SDR 13.5
3" - 48" SDR 15.5
3" - 54" SDR 17
3" - 54" SDR 21
3" - 54" SDR 26
3" - 63" SDR 32.5
3" - 63" Sch 41
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
3" - 18" SDR 7.3
3" - 20" SDR 8.3
3" - 24" SDR 9
3" - 30" SDR 9.3
3" - 36" SDR 11
3" - 36" SDR 13.5
3" - 48" SDR 15.5
3" - 54" SDR 17
3" - 54" SDR 21
3" - 54" SDR 26
3" - 63" SDR 32.5
3" - 63" Sch 41
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 9 Magnolia, AR

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + ^*	PE 4710	J-M Manufacturing	FM 1613
PC 335: IPS 4" - 12" DR 7
PC 250: IPS 4" - 12" DR 9
PC 200: IPS 4" - 12" DR 11
PC 335: DIOD 4" - 12" DR 7
PC 250: DIOD 4" - 12" DR 9
PC 200: DIOD 4" - 12" DR 11
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo] and/or [JMM Logo].

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708 / PE 4710	JM Eagle	ASTM D2513
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1" CTS SDR 11.5
1" CTS SDR 12.5
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
1/2" IPS SDR 9.3
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 11
1" IPS SDR 9.3
1" IPS SDR 9.9
1" IPS SDR 13.5
1 1/4" IPS SDR 6
1 1/4" IPS SDR 9.3
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 9.3
2" IPS SDR 11
2" IPS SDR 11.5
2" IPS SDR 13.5
2 1/2" IPS SDR 11
2 1/2" IPS SDR 17
2 1/2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 11.5
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 9.3
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 11.5
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 11.5
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
10" IPS SDR 11
10" IPS SDR 11.5
10" IPS SDR 13.5
10" IPS SDR 15.5
10" IPS SDR 17
10" IPS SDR 21
14" IPS SDR 17
12" IPS SDR 7
12" IPS SDR 11
12" IPS SDR 11.5
12" IPS SDR 13.5
12" IPS SDR 17
12" IPS SDR 21
14" IPS SDR 11
14" IPS SDR 11.5
14" IPS SDR 13.5
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 11.5
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 11.5
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 11.5
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 17[2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM F714
IPS 4" - 65"[2]
DIPS 3" - 60"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ ^ § [G]	PE 4710	J-M Manufacturing	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ ^ [G]	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 11
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 11 Cochranton, PA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# +*	PE 4710	JM Eagle	FM 1613
IPS 4" - 24" (PC 335) DR 7
IPS 4" - 24" (PC 250) DR 9
IPS 4" - 24" (PC 200) DR 11
DIOD 4" - 24" (PC 335) DR 7
DIOD 4" - 24" (PC 250) DR 9
DIOD 4" - 24" (PC 200) DR 11
# This product may be marked with an alternate trade name: J-M Manufacturing, JM Eagle, [JM Eagle Logo], [JMM Logo] - J-M Manufacturing. * Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73F.

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708 / PE 4710	JM Eagle	ASTM D2513
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1" CTS SDR 11.5
1" CTS SDR 12.5
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
1/2" IPS SDR 9.3
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 9.3
1" IPS SDR 9.9
1" IPS SDR 11
1" IPS SDR 13.5
1 1/4" IPS SDR 6
1 1/4" IPS SDR 9.3
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 9.3
2" IPS SDR 11
2" IPS SDR 11.5
2" IPS SDR 13.5
2 1/2" IPS SDR 11
2 1/2" IPS SDR 13.5
2 1/2" IPS SDR 17
2 1/2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 11.5
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 9.3
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 11.5
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 11.5
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
10" IPS SDR 11
10" IPS SDR 11.5
10" IPS SDR 13.5
10" IPS SDR 15.5
10" IPS SDR 17
10" IPS SDR 21
12" IPS SDR 7
12" IPS SDR 11
12" IPS SDR 11.5
12" IPS SDR 13.5
12" IPS SDR 17
12" IPS SDR 21
14" IPS SDR 11
14" IPS SDR 11.5
14" IPS SDR 13.5
14" IPS SDR 17
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 11.5
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 11.5
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 11.5
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe ¢*	PE 2708 / PE 4710	JM Eagle	CSA B137.4
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1" CTS SDR 11.5
1" CTS SDR 12.5
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
1/2" IPS SDR 9.3
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 11
1" IPS SDR 13.5
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 11
2" IPS SDR 11.5
3" IPS SDR 11
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 11
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 13.5
6" IPS SDR 17
8" IPS SDR 11
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
10" IPS SDR 11
10" IPS SDR 13.5
10" IPS SDR 17
10" IPS SDR 21
12" IPS SDR 11
12" IPS SDR 13.5
12" IPS SDR 17
14" IPS SDR 11
14" IPS SDR 13.5
14" IPS SDR 17
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark are Certified.

Oil and Gas Producing Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	ASTM F2619
1/2" - 24" SDR 7
1/2" - 24" SDR 7.3
1/2" - 30" SDR 9
1/2" - 36" SDR 11
1/2" - 42" SDR 13.5
2" - 54" SDR 17
3" - 63" SDR 21
6" - 63" SDR 26
6" - 63" SDR 32.5
^ This product may be marked with an alternate trade name: JM Eagle or [JM Eagle Logo].

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"[3]
[3] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM F714
IPS 4" - 65"[3]
[3] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[4]
1/2" SDR 9[4]
1/2" - 2" SDR 11[4]
[4] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D3035
3/4" - 3" DR 7
3/4" - 3" DR 9
1/2" - 3" DR 11[4]
1/2" - 3" DR 13.5[4]
1/2" DR 17[3] [4]
3/4" - 3" DR 17[4]
1/2" - 3/4" DR 21[3] [4]
1" - 3" DR 21[4]
1/2" - 3/4" DR 26[3] [4]
1" - 3" DR 26[4]
[4] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [3] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. [4] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[4]
1/2" - 2" SIDR 15[4]
1/2" - 2" SIDR 19[4]
[4] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ ¢ [G]	PE 4710	J-M Manufacturing	CSA B137.1
3/4" - 2" Series 250 (Table 7)
3/4" - 3" Series 250 (Table 5)
1-1/2" - 24" IPS DR 7
1-1/2" - 36" IPS DR 9
4" - 24" DIPS DR 7
4" - 28" IPS DR 7.3
4" - 30" DIPS DR 9
4" - 36" DIPS DR 11
4" - 42" IPS DR 11
4" - 48" DIPS DR 13.5
4" - 48" IPS DR 13.5
4" - 60" DIPS DR 17
4" - 60" DIPS DR 21
4" - 60" IPS DR 15.5
4" - 65" IPS DR 17
4" - 65" IPS DR 19
4" - 65" IPS DR 21
6" - 65" IPS DR 26
6" - 65" IPS DR 32.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 15 Sunnyside, WA

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^ +*	PE 4710	JM Eagle	FM 1613
IPS 4" - 24" (PC 335) DR 7
IPS 4" - 24" (PC 250) DR 9
IPS 4" - 24" (PC 200) DR 11
DIOD 4" - 24" (PC 335) DR 7
DIOD 4" - 24" (PC 250) DR 9
DIOD 4" - 24" (PC 200) DR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], and/or [JMM Logo]. * Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73F.

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708 / PE 4710	JM Eagle	ASTM D2513
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1" CTS SDR 11.5
1" CTS SDR 12.5
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
1/2" IPS SDR 9.3
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 9.3
1" IPS SDR 9.9
1" IPS SDR 11
1" IPS SDR 13.5
1 1/4" IPS SDR 6
1 1/4" IPS SDR 9.3
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 9.3
2" IPS SDR 11
2" IPS SDR 11.5
2" IPS SDR 13.5
2 1/2" IPS SDR 11
2 1/2" IPS SDR 13.5
2 1/2" IPS SDR 17
2 1/2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 11.5
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 9.3
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 11.5
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 11.5
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
10" IPS SDR 11
10" IPS SDR 11.5
10" IPS SDR 13.5
10" IPS SDR 15.5
10" IPS SDR 17
10" IPS SDR 21
12" IPS SDR 7
12" IPS SDR 11
12" IPS SDR 11.5
12" IPS SDR 13.5
12" IPS SDR 17
12" IPS SDR 21
14" IPS SDR 11
14" IPS SDR 11.5
14" IPS SDR 13.5
14" IPS SDR 17
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 11.5
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 11.5
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 11.5
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe ¢*	PE 2708 / PE 4710	JM Eagle	CSA B137.4
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 11
1" IPS SDR 13.5
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 11
2" IPS SDR 11.5
3" IPS SDR 11
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 11
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 13.5
6" IPS SDR 17
8" IPS SDR 11
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
10" IPS SDR 11
10" IPS SDR 13.5
10" IPS SDR 15.5
10" IPS SDR 17
10" IPS SDR 21
12" IPS SDR 11
12" IPS SDR 13.5
12" IPS SDR 17
14" IPS SDR 11
14" IPS SDR 13.5
14" IPS SDR 17
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 11.5
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Tubing ¢*	PE 2708 / PE 4710	JM Eagle	CSA B137.4
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark are Certified.

Oil and Gas Producing Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	ASTM F2619
1/2" - 24" SDR 7
1/2" - 24" SDR 7.3
1/2" - 30" SDR 9
1/2" - 36" SDR 11
1/2" - 42" SDR 13.5
2" - 54" SDR 17
3" - 63" SDR 21
6" - 63" SDR 26
6" - 63" SDR 32.5
^ This product may be marked with an alternate trade name: JM Eagle or [JM Eagle Logo].

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM F714
DIPS 3" - 60"[2]
IPS 4" - 65"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D3035
3/4" - 3" DR 7
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
[1] These sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ ¢ [G]	PE 4710	J-M Manufacturing	CSA B137.1
1-1/2” - 24” IPS DR 7
4” - 28” IPS DR 7.3
1 1/2” - 36” IPS DR 9
4” - 42” IPS DR 11
4” - 48” IPS DR 13.5
4” - 60” IPS DR 15.5
4” - 65” IPS DR 17
4” - 65” IPS DR 19
4” - 65” IPS DR 21
6” - 65” IPS DR 26
6” - 65” IPS DR 32.5
4” - 24” DIPS DR 7
4” - 30” DIPS DR 9
4” - 36” DIPS DR 11
4” - 48” DIPS DR 13.5
4” - 60” DIPS DR 17
4” - 60” DIPS DR 21
3/4" - 2” Series 250 (Table 7)
3/4" - 3” Series 250 (Table 5)
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 17 Tulsa, OK

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + ^*	PE 4710	J-M Manufacturing	FM 1613
PC 335: IPS 4" - 24" DR 7
PC 250: IPS 4" - 24" DR 9
PC 200: IPS 4" - 24" DR 11
PC 335: DIOD 4" - 24" DR 7
PC 250: DIOD 4" - 24" DR 9
PC 200: DIOD 4" - 24" DR 11
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo] and/or [JMM Logo].

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708 / PE 4710	JM Eagle	ASTM D2513
1/2" CTS SDR 7
3/4" CTS SDR 9.8
1" CTS SDR 9.3
1" CTS SDR 11.5
1" CTS SDR 12.5
1 1/4" CTS SDR 11.5
1 1/4" CTS SDR 15.3
1/2" IPS SDR 9.3
1/2" IPS SDR 11
3/4" IPS SDR 9.3
3/4" IPS SDR 11
1" IPS SDR 9.3
1" IPS SDR 9.9
1" IPS SDR 11
1" IPS SDR 13.5
1 1/4" IPS SDR 6
1 1/4" IPS SDR 9.3
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
2" IPS SDR 9.3
2" IPS SDR 11
2" IPS SDR 11.5
2" IPS SDR 13.5
2 1/2" IPS SDR 11
2 1/2" IPS SDR 13.5
2 1/2" IPS SDR 17
2 1/2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 11.5
3" IPS SDR 13.5
3" IPS SDR 17
4" IPS SDR 9.3
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
6" IPS SDR 11
6" IPS SDR 11.5
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 11.5
8" IPS SDR 13.5
8" IPS SDR 21
8" IPS SDR 17
10" IPS SDR 11
10" IPS SDR 11.5
10" IPS SDR 13.5
10" IPS SDR 15.5
10" IPS SDR 17
10" IPS SDR 21
12" IPS SDR 7
12" IPS SDR 11
12" IPS SDR 11.5
12" IPS SDR 13.5
12" IPS SDR 17
12" IPS SDR 21
14" IPS SDR 11
14" IPS SDR 11.5
14" IPS SDR 13.5
14" IPS SDR 17
14" IPS SDR 21
16" IPS SDR 11
16" IPS SDR 11.5
16" IPS SDR 13.5
16" IPS SDR 17
16" IPS SDR 21
18" IPS SDR 11
18" IPS SDR 11.5
18" IPS SDR 13.5
18" IPS SDR 17
18" IPS SDR 21
20" IPS SDR 11
20" IPS SDR 11.5
20" IPS SDR 13.5
20" IPS SDR 17
20" IPS SDR 21
22" IPS SDR 13.5
22" IPS SDR 17
22" IPS SDR 21
24" IPS SDR 13.5
24" IPS SDR 17
24" IPS SDR 21
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Eagle	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Eagle	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Eagle	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3/4" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Eagle	ASTM F714
IPS 4" - 65"[2]
DIPS 3" - 60"[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	J-M Manufacturing	AWWA C906
4" - 65" [2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	AWWA C906
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.
Pipe^	PE 4710	J-M Manufacturing	ASTM F714
4" - 65"
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Mexichem Costa Rica S.A
La Asunción de Belén,
250m West of Francisco J.Orlich bridge
Heredia, San José 3482-1000,
Costa Rica
506 2209 34 0
Visit this company's website

Facility : San José, Costa Rica

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Amanco PE Pipe	ASTM D3035
3" - 12" DR 7
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Amanco PE Pipe	ASTM D3035
3" - 12" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Mexichem Soluciones Integrales S.A. de C.V.
Avenida Paseo de la Reforma No. 483 PISO 47,
Entre las calles de Rio Elba y Rio de la Plata
Cuauhtemco, CDMX, 06500
Mexico
52 442 217 7970

Facility : Cuautitlán Izcalli, Mexico

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem 2480	AWWA C901
3/4" - 3" SDR 9
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem 2490	AWWA C901
3/4" - 3" SDR 9
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem 2492	AWWA C901
3/4" - 3" SDR 9
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem 2502	AWWA C901
3/4" - 3" SDR 9
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem 2480	AWWA C906
4" - 24"
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem 2490	AWWA C906
4" - 24"
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem 2492	AWWA C906
4" - 24"
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem 2502	AWWA C906
4" - 24"
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem A6210	AWWA C906
3/4" - 24"
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem E6210C	AWWA C901
3/4" - 3" SDR 7, 9, 11, 13.5
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe++ [G]	PE 4710	Wavin PEAD MX-Chem E6210C	AWWA C906
4" - 24"
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Modern Polymer Pipe and Extrusions, LLC
1655 Louisiana Street
Beaumont, TX 77701
United States
800-231-8198
409-504-4654
Visit this company's website

Facility : Pasadena, TX

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Modern Polymer Pipe PE4710	ASTM D3035
2" - 3" SDR 7
2" - 3" SDR 9
2" - 3" SDR 11[1]
2" - 3" SDR 13.5[1]
2" - 3" SDR 17[1]
2" - 3" SDR 21[1]
2" - 3" SDR 26[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Modern Polymer Pipe PE4710	ASTM F714
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21
4" - 24" SDR 26
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Modern Polymer Pipe PE4710	AWWA C901
2" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Modern Polymer Pipe PE4710	AWWA C906
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 4710	Modern Polymer Pipe PE4710	ASTM D3035
2" - 3" SDR 7
2" - 3" SDR 9
2" - 3" SDR 11
2" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21
2" - 3" SDR 26
Pipe	PE 4710	Modern Polymer Pipe PE4710	ASTM F714
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21
4" - 24" SDR 26
Pipe	PE 4710	Modern Polymer Pipe PE4710	AWWA C901
2" - 3" SDR 9
Pipe	PE 4710	Modern Polymer Pipe PE4710	AWWA C906
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 4710	Modern Polymer Pipe PE4710	ASTM F714
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21
4" - 24" SDR 26

Numex Plastics, Inc.
3505 S. Main Street
P.O. Box 1697
Roswell, NM 88202-1697
United States
575-622-2070

Facility : Roswell, NM

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 3608/4710	NUMEX	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 3608/4710	NUMEX	ASTM D3035
1/2" - 3" DR 5[1]
1/2" - 3" DR 6[1]
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 3608/4710	NUMEX	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

NuMex Plastics, Inc.
3505 South Main Street
Roswell, NM 88203
United States
575-622-2070

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ [G]	PE 4710	NuMex	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5
3/4" - 2" SIDR 15
3/4" - 2" SIDR 19
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ [G]	PE 4710	NuMex	ASTM D3035
3/4" - 2" DR 7
3/4" - 2" DR 9
3/4" - 2" DR 11
3/4" - 2" DR 13.5
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ [G]	PE 4710	NuMex	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 4710	Super Service Blue CTS	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 4710	Super Service Blue CTS	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Oil Creek Plastics
East Titusville Road
P.O. Box 385
Titusville, PA 16354
United States
800-537-3661
814-827-3661
Visit this company's website

Facility : Titusville, PA

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708	OIL CREEK PLASTICS	ASTM D2513
1/2" CTS X .090" WALL
1/2" IPS DR 9.3
3/4", 1", 1 1/4", 1 1/2", 2", 3", 4", 6" IPS DR 11
1" CTS X .099" WALL
1 1/4" IPS DR 10
3", 4" IPS DR 11.5
4", 6" IPS DR 13.5
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe §*	PE 4710	OIL CREEK PLASTICS	ASTM D2513
1/2" IPS DR 9.33
3/4" , 1" , 1-1/4" , 1-1/2" , 2" , 3" , 4" IPS DR 11
1/2" CTS x .090" wall
1" CTS x .099" wall
1" CTS x .101" wall
1-1/4" CTS x .121" wall
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ +	PE 3608/4710	Oil Creek Aqua-Jet	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[2]
3/4" - 3" SIDR 15[2]
3/4" - 2" SIDR 19[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe$ +	PE 3608/4710		ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[2]
3/4" - 3" SIDR 15[2]
3/4" - 2" SIDR 19[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Tubing$ +	PE 3608/4710	Oil Creek Aqua-Jet (CTS)	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Tubing+	PE 3608/4710		ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe$ +	PE 3608/4710	Aqua-Blue	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[2]
3/4" - 2" SIDR 15[2]
3/4" - 2" SIDR 19[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 3608/4710	Aqua-Blue	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Tubing$ +	PE 3608/4710	Oil Creek Aqua-Jet (OD)	ASTM D3035
1/2" DR 7[2]
1/2" DR 9[2]
1/2" - 3" DR 11[2]
1/2" - 3" DR 13.5[2]
3/4" - 3" DR 7
3/4" - 3" DR 9
3/4" - 3" DR 15.5[2]
3/4" - 3" DR 17[2]
1" - 3" DR 21[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Tubing$ +	PE 3608/4710	Oil Creek Aqua-Jet (OD)	ASTM F714
4" - 8" DR 7
4" - 8" DR 7.3
4" - 8" DR 9
4" - 8" DR 11
4" - 8" DR 13.5
4" - 8" DR 15.5[3]
4" - 8" DR 17
4" - 8" DR 21
[3] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Performance Pipe
A Div. of Chevron Phillips Chem Co., LP
8261 Belleview Drive
Suite 110
Plano, TX 75024
United States
972-599-6600
Visit this company's website

Facility : Bloomfield, IA

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Socket Fittings! ^ ¢ §*	PE 2406/2708	Driscoplex® 6500	ASTM D2513/CSA B137.4
90 Degree Elbow
1/2", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS DR 7
Coupling
1/2", 3/4", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3" 4" IPS DR 7	1 1/4" CTS SDR 9
End Cap
1/2", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/2", 2", 3", 4" IPS SDR 7	1 1/4" CTS SDR 9.3	1 1/4" IPS SDR 7.3
Purge Cap (w/ 1/2" CTS outlet)
1 1/4", 2", 3", 4" IPS DR 7
Reducer Coupling
1/2" IPS x 1/2" CTS DR 7	3/4" CTS x 1/2" CTS DR 7	3/4" IPS x 1/2" CTS DR 7	3/4" IPS x 1/2" IPS DR 7
1" CTS x 1/2" CTS DR 7	1" CTS x 1/2" IPS DR 7	1" IPS x 1/2" CTS DR 7	1" IPS x 1/2" IPS DR 7
1" IPS x 3/4" CTS DR 7	1" IPS x 3/4" IPS DR 7	1" CTS x 3/4" IPS DR 7	1" IPS x 1" CTS DR 7
1 1/2" IPS x 1 1/4" IPS DR 7	1 1/4" IPS x 1 1/4" CTS DR 7.3	1 1/4" IPS x 1/2" IPS DR 7	1 1/4" IPS x 3/4" IPS DR 7
1 1/4" IPS x 1" IPS DR 7	1 1/4" IPS x 1" CTS DR 7	1 1/4" IPS X 3/4" CTS DR 7.3	2" IPS x 1" CTS DR 7
2" IPS x 1" IPS DR 7	2" IPS x 1 1/4" CTS DR 7	2" IPS x 1 1/4" IPS DR 7	2" IPS x 1 1/2" IPS DR 7
3" IPS x 2" IPS DR 7	4" IPS x 2" IPS DR 7	4" IPS x 3" IPS DR 7
Service (Branch)(Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 12" IPS	1/2" IPS DR 7 x 1 1/4" - 12" IPS	3/4" IPS DR 7 x 1 1/4" - 12" IPS	1" CTS DR 7 x 1 1/4" - 12" IPS
1" IPS DR 7 x 1 1/4" - 12" IPS	1 1/4" IPS DR 7 x 2" - 12" IPS
Tapping Tee (Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 18" IPS	1/2" IPS DR 7 x 1 1/4" - 18" IPS	3/4" CTS DR 7 x 1 1/4" - 18" IPS	3/4" IPS DR 7 x 1 1/4" - 18" IPS
1" CTS DR 7 x 1 1/4" - 18" IPS	1" IPS DR 7 x 1 1/4" - 18" IPS	1 1/4" CTS DR 7 x 2" - 18" IPS	1 1/4" IPS DR 7 x 2" – 18" IPS
Tee
1/2" CTS DR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 4" IPS DR 7	1" CTS DR 7.3	3" IPS DR 7.3
! Product may or may not bear the NSF U.P. Code marking. * Gas pipe and tubing limited to outside underground use only. ^ Meets the requirements of ASTM D2683. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Butt Fusion Fittings! ~ ¢ §*	PE 2406/2708	Driscoplex® 6500	ASTM D2513/CSA B137.4
45 Degree Elbow
2" IPS SDR 7 - 11	3", 4", 6", 8" IPS SDR 7 - 17
90 Degree Elbow
1/2" CTS x .090" WALL	3/4" IPS SDR 11	1", 1 1/4" IPS SDR 9 - 11	1 1/2" IPS SDR 11
2" IPS SDR 7 – 11	3", 4", 6", 8" IPS SDR 7 - 17
Branch Saddle (Outlet x Base)
1/2" CTS (.090" Wall) x 1 1/4" – 24" IPS	1/2" IPS DR 9.3 x 1 1/4" – 24" IPS	3/4" IPS DR 9, 11 x 1 1/4" – 24" IPS	1" IPS DR 9, 11 x 2" – 24" IPS
1 1/4" IPS DR 11 x 2" – 24" IPS	1 1/2" IPS DR 11 x 2" – 24" IPS	2" IPS DR 9, 11 x 3" – 24" IPS	3" IPS DR 7 - 11 x 3" – 24" IPS
4" IPS DR 7 - 11 x 3" – 24" IPS	6" IPS DR 11 x 8" – 24" IPS
End Cap
1/2" CTS (.090" Wall)	1/2" IPS DR 9.3	3/4" IPS SDR 11	1" CTS x (.102" Wall)
1" IPS SDR 11	1 1/4" IPS SDR 10	1 1/2" IPS SDR 11	2" IPS SDR 11
3" IPS SDR 11/11.5	4" IPS DR 11/11.5, 13.5	6" IPS DR 11/11.5, 13.5	8" IPS DR 11, 13.5
Purge Cap (Outlet x Main)
1/2" CTS x 2", 3", 4", 6", 8" IPS DR 11	3/4" IPS x 2", 3", 4", 6", 8" IPS DR 11	1" CTS x 2", 3", 4", 6", 8" IPS DR 11
Purge Point
1 1/4" DR 10	2" DR 11
Reducer Coupling
1/2" IPS DR 9.3 x 1/2" CTS (.090" Wall)	3/4" IPS DR 11 x 1/2" CTS (.090" Wall)	1" x 3/4" IPS DR 11	1" CTS (.102" Wall) x 1/2" CTS (.090" Wall)
1" IPS DR 11 x 1/2" CTS (.090" Wall)	1" IPS DR 11 x 1/2" IPS DR 9.3	1" IPS DR 11 x 3/4" CTS (.077" Wall, .090" Wall)	1" IPS DR 11 x 1" CTS (.102" Wall)
1 1/4" CTS (.121" Wall) x 1" IPS DR 11	1 1/2" x 3/4" IPS DR 11	1 1/2" x 1" IPS DR 11	2" x 1" IPS DR 11
2" IPS DR 11 x 1 1/4" IPS	2" x 1 1/2" IPS DR 11	3" x 2" IPS DR 11	4" IPS DR 13.5 x 2" DR 11
4" IPS DR 13.5 x 3" DR 11	4" x 2" IPS DR 11	4" x 3" IPS DR 11	6" x 4" IPS DR 11, 13.5
8" x 6" IPS DR 11, 13.5
Tapping Tee (Outlet x Base)
1/2" CTS (.090" Wall) x 1 1/4"- 24" IPS	1/2" IPS DR 9.3 x 1 1/4" – 24" IPS	3/4" IPS DR 11 x 1 1/4" – 24" IPS	1" CTS (.090" Wall) x 1 1/4" – 24" IPS
1" IPS DR 11 x 1 1/4" – 24" IPS	1" CTS (0.090, 0.102" Wall) x 1 1/4" - 24" IPS	1 1/4" IPS DR 11 x 2" – 24" IPS	2" IPS DR 11 x 3" - 24" IPS
Tee
1/2" CTS (.090" Wall)	3/4" IPS DR 11	1" CTS (.102" Wall)	1" IPS DR 11
1 1/4" IPS DR 10	1 1/2" IPS DR 11	2" IPS DR 11	3" IPS DR 11/11.5
4" IPS DR 11 – 13.5	6" IPS DR 11 – 13.5	8" IPS DR 11 – 13.5
! Product may or may not bear the NSF U.P. Code marking. * Gas pipe and tubing limited to outside underground use only. ~ Meets the requirements of ASTM D3261. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Socket Fittings! ^ ¢ §*	PE 4710	Driscoplex® 8100	ASTM D2513/CSA B137.4
90 Degree Elbow
1/2", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS DR 7
Coupling
1/2", 3/4", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS DR 7
End Cap
1/2", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/2", 2", 3", 4" IPS SDR 7	1 1/4" IPS SDR 7.3
Purge Cap (w/ 1/2" CTS outlet)
1 1/4", 2", 3", 4" IPS DR 7
Reducer Coupling
1/2" IPS x 1/2" CTS DR 7	3/4" CTS x 1/2" CTS DR 7	3/4" IPS x 1/2" CTS DR 7	3/4" IPS x 1/2" IPS DR 7
1" CTS x 1/2" CTS DR 7	1" CTS x 1/2" IPS DR 7	1" IPS x 1/2" CTS DR 7	1" IPS x 1/2" IPS DR 7
1" IPS x 3/4" CTS DR 7	1" IPS x 3/4" IPS DR 7	1" CTS x 3/4" IPS DR 7	1" IPS x 1" CTS DR 7
1 1/2" IPS x 1 1/4" IPS DR 7	1 1/4" IPS x 1 1/4" CTS DR 7.3	1 1/4" IPS x 1/2" IPS DR 7	1 1/4" IPS x 3/4" IPS DR 7
1 1/4" IPS x 3/4" CTS DR 7.3	1 1/4" IPS x 1" IPS DR 7	1 1/4" IPS x 1" CTS DR 7	2" IPS x 1" CTS DR 7
2" IPS x 1" IPS DR 7	2" IPS x 1 1/4" CTS DR 7.3	2" IPS x 1 1/4" IPS DR 7	2" IPS x 1 1/2" IPS DR 7
3" IPS x 2" IPS DR 7	4" IPS x 2" IPS DR 7	4" IPS x 3" IPS DR 7
Service(Branch) Saddle (Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 24" IPS	1/2" IPS DR 7 x 1 1/4" - 24" IPS	3/4" IPS DR 7 x 1 1/4" - 24" IPS	1" CTS DR 7 x 1 1/4" - 24" IPS
1" IPS DR 7 x 1 1/4" - 24" IPS	1 1/4" IPS DR 7 x 2" - 24" IPS
Tapping Tee (Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 24" IPS	1/2" IPS DR 7 x 1 1/4" - 24" IPS	3/4" CTS DR 7 x 1 1/4" - 24" IPS	3/4" IPS DR 7 x 1 1/4" - 24" IPS
1" CTS DR 7 x 1 1/4" - 24" IPS	1" IPS DR 7 x 1 1/4" - 24" IPS	1 1/4" CTS DR 7 x 2" - 24" IPS	1 1/4" IPS DR 7 x 2" – 24" IPS
Tee
1/2" CTS DR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 4" IPS DR 7	1" CTS DR 7.3	3" IPS DR 7.3
! Product may or may not bear the NSF U.P. Code marking. * Gas pipe and tubing limited to outside underground use only. ^ Meets the requirements of ASTM D2683. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Butt Fusion Fittings! ~ ¢ §*	PE 4710	Driscoplex® 8100	ASTM D2513/CSA B137.4
45 Degree Elbow
2", 3" IPS SDR 7 - 11	4", 6", 8" IPS SDR 7 - 17
90 Degree Elbow
1/2" CTS x .090" WALL	3/4" IPS SDR 11	1", 1 1/4" IPS SDR 9, 11	1 1/2" IPS SDR 11
2", 3" IPS SDR 7 - 11	4", 6", 8" IPS SDR 7 - 17
Branch Saddle (Outlet x Base)
1/2" CTS (.090" Wall) x 1 1/4" – 24" IPS	1/2" IPS DR 9.3 x 1 1/4" – 24" IPS	3/4" IPS DR 9 - 11 x 1 1/4" – 24" IPS	1" IPS DR 9 - 11 x 2" – 24" IPS
1 1/4" IPS DR 11 x 2" – 24" IPS	1 1/2" IPS DR 11 x 2" – 24" IPS	2" IPS DR 9 - 11 x 3" – 24" IPS	3" IPS DR 7 - 11 x 3" – 24" IPS
4" IPS DR 7 - 11 x 3" – 24" IPS	6" IPS DR 11 x 8" – 24" IPS
End Cap
1/2" CTS (.090" WALL)	1/2" IPS DR 9.3	3/4" CTS (.090" WALL)	3/4" IPS SDR 11
1" CTS (.102", .125" WALL)	1" IPS SDR 9, 11	1 1/4" IPS SDR 9, 11	1 1/2" IPS SDR 11
2" IPS SDR 7 - 11	3" IPS SDR 7 – 17	4", 6", 8" IPS SDR 7 - 17
Purge Cap/Purge Point
1/2" CTS x 2" - 8" IPS DR 11	3/4" IPS x 2" – 8" IPS DR 11	1" CTS x 2" – 8" IPS DR 11	1 1/4" DR 10
2" DR 11
Reducer Coupling
3/4" IPS DR 11 x 1/2" CTS (.090" Wall)	3/4" IPS DR 11 x 3/4" CTS (.090" Wall)	1" x 1/2" IPS DR 11	1" x 3/4" IPS DR 11
1" CTS (.102" Wall) x 1/2" CTS (.090" Wall)	1" IPS DR 9 x 1" CTS (.125" Wall)	1" IPS DR 11 x 1/2" CTS (.090" Wall)	1" IPS DR 11 x 1" CTS (.102" Wall)
1 1/4" x 1" IPS DR 11	1 1/4" CTS (.121" Wall) X 1" IPS DR 11	1 1/4" IPS DR 11 x 1" CTS (.102" Wall)	1 1/4" IPS DR 11 x 1 1/4" CTS (.090" Wall)
1 1/2" x 3/4" IPS DR 11	1 1/2" x 1" IPS DR 11	2" x 1" IPS DR 11	2" x 1 1/2" IPS DR 9 - 11
2" IPS DR 11 x 1 1/4" IPS DR 9 - 11	3" x 2" IPS DR 7 - 11	4" IPS DR 11 - 13.5 x 2" DR 7 - 17	6" x 4" IPS DR 7 - 17
4" x 3" IPS DR 11	8" x 6" IPS DR 7 - 17
Tapping Tee for Gas Applications (Outlet x Base)
1/2" CTS (.090" Wall) x 1 1/4" - 24"	1/2" IPS DR 9.3 x 1 1/4" – 24"	3/4" IPS DR 11 x 1 1/4" – 24"	1" CTS (.090" Wall) X 1 1/4" – 24"
1" CTS (0.090, 0.102" Wall) x 1 1/4" - 24" IPS	1" IPS DR 11 x 1 1/4" – 24"	1 1/4" IPS DR 11 x 2" – 24"	2" IPS DR 11 x 3" - 24" IPS
Tee
3/4" IPS DR 11	1" IPS DR 9 - 11	1 1/4" IPS DR 11	1 1/2" IPS DR 11
2", 3" IPS SDR 7 - 11	4", 6", 8" IPS SDR 7 - 17
! Product may or may not bear the NSF U.P. Code marking. * Gas pipe and tubing limited to outside underground use only. ~ Meets the requirements of ASTM D3261. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Socket Fittings! + § [G]	PE 4710	Driscoplex® 8100	ASTM D2683
90 Degree Elbow
1/2", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS DR 7
Coupling
1/2", 3/4", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3'', 4" IPS DR 7
End Cap
1/2", 1" CTS SDR 7	1/2", 3/4", 1", 1 1/2", 2", 3", 4" IPS SDR 7
Purge Cap (w/ 1/2" CTS outlet)
1 1/4", 2", 3", 4" IPS DR 7
Reducer Coupling
1/2" IPS x 1/2" CTS DR 7	3/4" CTS x 1/2" CTS DR 7	3/4" IPS x 1/2" CTS DR 7	3/4" IPS x 1/2" IPS DR 7
1" CTS x 1/2" CTS DR 7	1" CTS x 1/2" IPS DR 7	1" IPS x 1/2" CTS DR 7	1" IPS x 1/2" IPS DR 7
1" IPS x 3/4" CTS DR 7	1" IPS x 3/4" IPS DR 7	1" CTS x 3/4" IPS DR 7	1" IPS x 1" CTS DR 7
1 1/2" IPS x 1 1/4" IPS DR 7	1 1/4" IPS x 1 1/4" CTS DR 7.3	1 1/4" IPS x 1/2" IPS DR 7	1 1/4" IPS x 3/4" IPS DR 7
1 1/4" IPS x 1" IPS DR 7	1 1/4" IPS x 1" CTS DR 7	1 1/4" IPS x 3/4" CTS DR 7.3	2" x 1 1/4" IPS DR 7
2" IPS x 1" CTS DR 7	2" IPS x 1" IPS DR 7	2" IPS x 1 1/4" CTS DR 7.3	2" IPS x 1 1/2" IPS DR 7
3" IPS x 2" IPS DR 7	4" IPS x 2" IPS DR 7	4" IPS x 3" IPS DR 7
Service (Branch) Saddle (Outlet x Base)
1/2" CTS DR 7 x 1 1/4" - 24" IPS	1/2" IPS DR 7 x 1 1/4" - 24" IPS	3/4" IPS DR 7 x 1 1/4" - 24" IPS	1" CTS DR 7 x 1 1/4" - 24" IPS
1" IPS DR 7 x 1 1/4" - 24" IPS	1 1/4" IPS DR 7 x 2" - 24" IPS
Tapping Tee (Outlet x Base)
1 1/4" IPS DR 7 x 2" – 24" IPS	1/2" CTS DR 7 x 1 1/4" - 24" IPS	1/2" IPS DR 7 x 1 1/4" - 24" IPS	3/4" CTS DR 7 x 1 1/4" - 24" IPS
3/4" IPS DR 7 x 1 1/4" - 24" IPS	1" CTS DR 7 x 1 1/4" - 24" IPS	1" IPS DR 7 x 1 1/4" - 24" IPS	1 1/4" CTS DR 7 x 2"- 24" IPS
Tee
1/2" CTS DR 7	1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 4" IPS DR 7	1" CTS DR 7.3	3" IPS DR 7.3
! Product may or may not bear the NSF U.P. Code marking. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Butt Fusion Fittings! + § [G]	PE 4710	Driscoplex® 8100	ASTM D3261
45 Degree Elbow
2", 3" IPS SDR 7 – 11	4", 6", 8" IPS SDR 7 - 17
90 Degree Elbow
2", 3" IPS SDR 7 – 11	4", 6", 8" IPS SDR 7 - 17
Branch Saddle (Outlet x Base)
2" IPS DR 9 x 3" – 24" IPS	3" IPS DR 7 - 9 x 3" – 24" IPS	4" IPS DR 7 - 11 x 3" – 24" IPS	6" IPS DR 11 x 8" – 24" IPS
End Cap
2", 3" IPS SDR 7 – 11	4", 6", 8" IPS SDR 7 - 17
Flange Adapter
1 1/2" IPS DR 9	2", 3" IPS DR 7 - 9	4", 6", 8", 10", 12", 14" IPS DR 7 - 17	16" IPS DR 9 - 17
18" DR IPS 11 - 17
Reducer Coupling
2" x 1 1/2" IPS DR 9	3" x 2" IPS DR 7 - 9	4" x 2" IPS DR 7 - 17	4" x 3" IPS DR 7 - 17
6" x 4" IPS DR 7 - 17	8" x 6" IPS DR 7 - 17
Tee
1" IPS DR 9	2", 3" IPS DR 7 - 9	4", 6", 8" IPS DR 7 - 17
! Product may or may not bear the NSF U.P. Code marking. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Butt Fusion Fittings! + ^ § [G]	PE 4710	Driscoplex® 1500	ASTM D3261
45 Degree Elbow
2", 3" IPS SDR 7 – 11	4", 6", 8" IPS SDR 7 - 11
90 Degree Elbow
2", 3" IPS SDR 7 – 11	4", 6", 8" IPS SDR 7 - 11
Branch Saddle (Outlet x Base)
2" IPS DR 9 x 3" – 24" IPS	3" IPS DR 7 - 9 x 3" – 24" IPS	4" IPS DR 7 - 11 x 3" – 24" IPS	6" IPS DR 11 x 8" – 24" IPS
End Cap
2", 3" IPS SDR 7 – 11	4", 6", 8" IPS SDR 7 - 11
Flange Adapter
1 1/2" IPS DR 9	2", 3" IPS DR 7 - 9	4", 6", 8", 10", 12", 14" IPS DR 7 - 11	16" IPS DR 9 - 11
18" DR IPS 11 - 11
Reducer Coupling
2" x 1 1/2" IPS DR 9	3" x 2" IPS DR 7 - 9	4" x 2" IPS DR 7 - 11	4" x 3" IPS DR 7 - 11
6" x 4" IPS DR 7 - 11	8" x 6" IPS DR 7 - 11
Tee
1" IPS DR 9	2", 3" IPS DR 7 - 9	4", 6", 8" IPS DR 7 - 11
! Product may or may not bear the NSF U.P. Code marking. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Applies to DR 9 and 11 only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Hagerstown, MD

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# % §*	PE 2406/2708	DriscoPlex® 6500	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe# % §*	PE 4710	Driscopipe® 8100	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe# % §*	PE 4710	YELLOWSTRIPE® 8300	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢ § [1]*	PE 4710	DriscoPlex 8400	ASTM D2513
1/2" - 10"
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [G]*	PE 4710	DriscoPlex PW	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
3" DR 7.3[1] [2]
3" DR 8.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
3" DR 9.3[1] [2]
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1 1/2" - 3" DR 32.5[1]
3" DR 41[1] [2]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 4710	DriscoPlex PW	ASTM F714
4" - 26" IPS SDR 7
4" - 18" IPS SDR 7.3
4" - 20" IPS SDR 8.3[2]
4" - 20", 22", 24" IPS SDR 9
4"- 20", 22" - 30" IPS SDR 9.3[2]
4" - 20", 22" - 36" IPS SDR 11
4" - 36" IPS SDR 13.5
4" - 48" IPS SDR 15.5[2]
4" - 54" IPS SDR 17
4" - 54" IPS SDR 21
4" - 54" IPS SDR 26
4" - 54" IPS SDR 32.5
4" - 54" IPS SDR 41
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 4710	DriscoPlex PW	AWWA C901
1 1/4" - 3" SDR 9
* Trade name may be followed by 1000, 1100, 1500, 1600, 4000, 4100 or 5100. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Reno, NV

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# % §*	PE 2406/2708	DriscoPlex® 6500	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢*	PE 2406/2708	DriscoPlex® 6500	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe% ¢*	PE 2708	DriscoPlex® 7500	CSA B137.4
1/2” – 8” SDR 8.8
1/2” – 8” SDR 10
1/2" - 10" SDR 11
1/2” – 12" SDR 13.5
1/2” – 12" SDR 17
1/2” – 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe% ¢*	PE 4710	Driscopipe® 8100	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe# % §*	PE 4710	YELLOWSTRIPE® 8300	ASTM D2513
1/2" - 10"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢*	PE 4710	YELLOWSTRIPE® 8300	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe% ¢ § [1]*	PE 4710	DriscoPlex 8400	ASTM D2513
1/2" - 10"
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.
Pipe% ¢*	PE 4710	DriscoPlex 8400	CSA B137.4
1/2" - 10" SDR 11
1/2" - 10" SDR 13.5
1/2" - 10" SDR 17
1/2" - 10" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Facility : Pryor, OK

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# % §*	PE 2406/2708	DriscoPlex® 6500	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢*	PE 2406/2708	DriscoPlex® 6500	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SIDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe% ¢*	PE 2708	DriscoPlex® 7500	CSA B137.4
1/2” – 8” SDR 8.8
1/2” – 8” SDR 10
1/2” – 10” SDR 11
1/2” – 12” SDR 13.5
1/2” – 12” SDR 17
1/2” – 12” SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe# % §*	PE 4710	Driscopipe® 8100	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢*	PE 4710	Driscopipe® 8100	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe# % §*	PE 4710	YELLOWSTRIPE® 8300	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢*	PE 4710	YELLOWSTRIPE® 8300	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe% ¢ § [1]*	PE 4710	DriscoPlex 8400	ASTM D2513
1/2" - 10"
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.
Pipe% ¢*	PE 4710	DriscoPlex 8400	CSA B137.4
1/2" - 10" SDR 11
1/2" - 10" SDR 13.5
1/2" - 10" SDR 17
1/2" - 10" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Facility : Knoxville, TN

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# % §*	PE 2406/2708	DriscoPlex® 6500	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢*	PE 2406/2708	DriscoPlex® 6500	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe% ¢*	PE 2708	DriscoPlex® 7500	CSA B137.4
1/2" – 8” SDR 8.8
1/2" – 8” SDR 10
1/2" – 10” SDR 11
1/2" – 12” SDR 13.5
1/2" – 12” SDR 17
1/2" – 12” SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe# % §*	PE 4710	Driscopipe® 8100	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢*	PE 4710	Driscopipe® 8100	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe# % §*	PE 4710	YELLOWSTRIPE® 8300	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe% ¢*	PE 4710	YELLOWSTRIPE® 8300	CSA B137.4
1/2" - 10" SDR 8.8
1/2" - 10" SDR 10
1/2" - 12" SDR 11
1/2" - 12" SDR 13.5
1/2" - 12" SDR 17
1/2" - 12" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe% ¢ § [1]*	PE 4710	DriscoPlex 8400	ASTM D2513
1/2" - 10"
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.
Pipe% ¢*	PE 4710	DriscoPlex 8400	CSA B137.4
1/2" - 10" SDR 11
1/2" - 10" SDR 13.5
1/2" - 10" SDR 17
1/2" - 10" SDR 21
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Facility : Brownwood, TX

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe% ¢ § [1]*	PE 4710	DriscoPlex 8400	ASTM D2513
1/2" - 10"
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.
Pipe% ¢*	PE 4710	DriscoPlex 8400	CSA B137.4
1/2" - 10" SDR 11
1/2" - 10" SDR 17
1/2" - 10" SDR 21
1/2" - 10" SDR 13.5
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe# % §*	PE 4710	YELLOWSTRIPE® 8300	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Pipeline Plastics, LLC
1301 Solana Boulevard
Suite 1440
Westlake, TX 76262
United States
940-627-9100
Visit this company's website

Facility : Rupert , ID

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +*	PE 4710	Pipeline Plastics	FM 1613
IPS 2" - 24" DR 7 (PC 335)
IPS 2" - 24" DR 9 (PC 250)
IPS 2" - 36" DR 11 (PC 200)
DIPS 2" - 24" DR 7 (PC 335)
DIPS 2" - 24" DR 9 (PC 250)
DIPS 2" - 36" DR 11 (PC 200)
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM D3035
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11[1]
1" - 3" DR 13.5[1]
1" - 3" DR 15.5[1]
1" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1" - 1 ¼ " DR 32.5[1] [2]
1½ - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 36" IPS DR 9
42" IPS DR 9[2]
4" - 42" IPS DR 11
48" - 54" IPS DR 11[2]
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26
4" - 65" IPS DR 32.5
4" - 54" IPS DR 41
60" - 65" IPS DR 41[2]
4" - 24" DIPS DR 7
30" - 36" DIPS DR 7[2]
4" - 30" DIPS DR 9
36" - 42" DIPS DR 9[2]
4" - 36" DIPS DR 11
42" - 54" DIPS DR 11[2]
4" - 48" DIPS DR 13.5
54" - 60" DIPS DR 13.5[2]
4" - 48" DIPS DR 17
4" - 60" DIPS DR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C901
1" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C906
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 26" IPS DR 7.3[2]
4" - 34" IPS DR 9
36" - 42" IPS DR 9[2]
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26[2]
4" - 65" IPS DR 32.2[2]
4" - 65" IPS DR 41[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 30" DIOD DR 9
4" - 36" DIOD DR 11
4" - 48" DIOD DR 13.5
4" - 60" DIOD DR 17
4" - 60" DIOD DR 21
4" - 60" DIOD DR 26[2]
4" - 60" DIOD DR 32.5[2]
4" - 60" DIOD DR 41[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Fair Bluff, NC

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +*	PE 4710	Pipeline Plastics	FM 1613
IPS 2" - 24" DR 7 (PC 335)
IPS 2" - 24" DR 9 (PC 250)
IPS 2" - 36" DR 11 (PC 200)
DIPS 2" - 24" DR 7 (PC 335)
DIPS 2" - 24" DR 9 (PC 250)
DIPS 2" - 36" DR 11 (PC 200)
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM D3035
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11[1]
1" - 3" DR 13.5[1]
1" - 3" DR 15.5[1]
1" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1" - 1 ¼ " DR 32.5[1] [2]
1½ - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 36" IPS DR 9
42" IPS DR 9[2]
4" - 42" IPS DR 11
48" - 54" IPS DR 11[2]
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26
4" - 65" IPS DR 32.5
4" - 54" IPS DR 41
60" - 65" IPS DR 41[2]
4" - 24" DIPS DR 7
30" - 36" DIPS DR 7[2]
4" - 30" DIPS DR 9
36" - 42" DIPS DR 9[2]
4" - 36" DIPS DR 11
42" - 54" DIPS DR 11[2]
4" - 48" DIPS DR 13.5
54" - 60" DIPS DR 13.5[2]
4" - 48" DIPS DR 17
4" - 60" DIPS DR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C901
1" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C906
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 26" IPS DR 7.3[2]
4" - 34" IPS DR 9
36" - 42" IPS DR 9[2]
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26[2]
4" - 65" IPS DR 32.2[2]
4" - 65" IPS DR 41[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 30" DIOD DR 9
4" - 36" DIOD DR 11
4" - 48" DIOD DR 13.5
4" - 60" DIOD DR 17
4" - 60" DIOD DR 21
4" - 60" DIOD DR 26[2]
4" - 60" DIOD DR 32.5[2]
4" - 60" DIOD DR 41[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Belle Fourche, SD

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +*	PE 4710	Pipeline Plastics	FM 1613
IPS 2" - 24" DR 7 (PC 335)
IPS 2" - 24" DR 9 (PC 250)
IPS 2" - 36" DR 11 (PC 200)
DIPS 2" - 24" DR 7 (PC 335)
DIPS 2" - 24" DR 9 (PC 250)
DIPS 2" - 36" DR 11 (PC 200)
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM D3035
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11[1]
1" - 3" DR 13.5[1]
1" - 3" DR 15.5[1]
1" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1" - 1 ¼ " DR 32.5[1] [2]
1½ - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 36" IPS DR 9
42" IPS DR 9[2]
4" - 42" IPS DR 11
48" - 54" IPS DR 11[2]
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26
4" - 65" IPS DR 32.5
4" - 54" IPS DR 41
60" - 65" IPS DR 41[2]
4" - 24" DIPS DR 7
30" - 36" DIPS DR 7[2]
4" - 30" DIPS DR 9
36" - 42" DIPS DR 9[2]
4" - 36" DIPS DR 11
42" - 54" DIPS DR 11[2]
4" - 48" DIPS DR 13.5
54" - 60" DIPS DR 13.5[2]
4" - 48" DIPS DR 17
4" - 60" DIPS DR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C901
1" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C906
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 26" IPS DR 7.3[2]
4" - 34" IPS DR 9
36" - 42" IPS DR 9[2]
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26[2]
4" - 65" IPS DR 32.2[2]
4" - 65" IPS DR 41[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 30" DIOD DR 9
4" - 36" DIOD DR 11
4" - 48" DIOD DR 13.5
4" - 60" DIOD DR 17
4" - 60" DIOD DR 21
4" - 60" DIOD DR 26[2]
4" - 60" DIOD DR 32.5[2]
4" - 60" DIOD DR 41[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Decatur, TX

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +*	PE 4710	Pipeline Plastics	FM 1613
IPS 2" - 24" DR 7 (PC 335)
IPS 2" - 24" DR 9 (PC 250)
IPS 2" - 36" DR 11 (PC 200)
DIPS 2" - 24" DR 7 (PC 335)
DIPS 2" - 24" DR 9 (PC 250)
DIPS 2" - 36" DR 11 (PC 200)
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM D3035
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11[1]
1" - 3" DR 13.5[1]
1" - 3" DR 15.5[1]
1" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1" - 1 ¼ " DR 32.5[1] [2]
1½ - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 36" IPS DR 9
42" IPS DR 9[2]
4" - 42" IPS DR 11
48" - 54" IPS DR 11[2]
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26
4" - 65" IPS DR 32.5
4" - 54" IPS DR 41
60" - 65" IPS DR 41[2]
4" - 24" DIPS DR 7
30" - 36" DIPS DR 7[2]
4" - 30" DIPS DR 9
36" - 42" DIPS DR 9[2]
4" - 36" DIPS DR 11
42" - 54" DIPS DR 11[2]
4" - 48" DIPS DR 13.5
54" - 60" DIPS DR 13.5[2]
4" - 48" DIPS DR 17
4" - 60" DIPS DR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C901
1" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C906
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 26" IPS DR 7.3[2]
4" - 34" IPS DR 9
36" - 42" IPS DR 9[2]
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26[2]
4" - 65" IPS DR 32.2[2]
4" - 65" IPS DR 41[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 30" DIOD DR 9
4" - 36" DIOD DR 11
4" - 48" DIOD DR 13.5
4" - 60" DIOD DR 17
4" - 60" DIOD DR 21
4" - 60" DIOD DR 26[2]
4" - 60" DIOD DR 32.5[2]
4" - 60" DIOD DR 41[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Levelland, TX

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +*	PE 4710	Pipeline Plastics	FM 1613
IPS 2" - 24" DR 7 (PC 335)
IPS 2" - 24" DR 9 (PC 250)
IPS 2" - 36" DR 11 (PC 200)
DIPS 2" - 24" DR 7 (PC 335)
DIPS 2" - 24" DR 9 (PC 250)
DIPS 2" - 36" DR 11 (PC 200)
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM D3035
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11[1]
1" - 3" DR 13.5[1]
1" - 3" DR 15.5[1]
1" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1" - 1 ¼ " DR 32.5[1] [2]
1½ - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 36" IPS DR 9
42" IPS DR 9[2]
4" - 42" IPS DR 11
48" - 54" IPS DR 11[2]
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26
4" - 65" IPS DR 32.5
4" - 54" IPS DR 41
60" - 65" IPS DR 41[2]
4" - 24" DIPS DR 7
30" - 36" DIPS DR 7[2]
4" - 30" DIPS DR 9
36" - 42" DIPS DR 9[2]
4" - 36" DIPS DR 11
42" - 54" DIPS DR 11[2]
4" - 48" DIPS DR 13.5
54" - 60" DIPS DR 13.5[2]
4" - 48" DIPS DR 17
4" - 60" DIPS DR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C901
1" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C906
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 26" IPS DR 7.3[2]
4" - 34" IPS DR 9
36" - 42" IPS DR 9[2]
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26[2]
4" - 65" IPS DR 32.2[2]
4" - 65" IPS DR 41[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 30" DIOD DR 9
4" - 36" DIOD DR 11
4" - 48" DIOD DR 13.5
4" - 60" DIOD DR 17
4" - 60" DIOD DR 21
4" - 60" DIOD DR 26[2]
4" - 60" DIOD DR 32.5[2]
4" - 60" DIOD DR 41[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Poly Technology (Polytech)
(A Granse Company)
Airlake Industrial Park
21670 Hamburg Avenue
Lakeville, MN 55044
United States
612-469-2198

Facility : Lakeville, MN

Irrigation - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[1]	PE 3608/4710	PolyTech		ASTM D2239
1" - 2" SIDR 19
3/4" - 2" SIDR 15
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, Excel Fusion or WSLP Fusion.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [G]	PE 3608/4710	PolyTech	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" SIDR 9[2]
1/2" - 2" SIDR 11.5[2]
1/2" - 2" SIDR 15[2]
3/4" - 2" SIDR 19[2]
[2] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, Excel Fusion or WSLP Fusion. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [1] [G]	PE 3608/4710	PolyTech	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, Excel Fusion or WSLP Fusion. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [G]	PE 4710	PolyTech	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, Excel Fusion or WSLP Fusion. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [1] [G]	PE 4710	PolyTech	AWWA C901
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, Excel Fusion or WSLP Fusion. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe[1] [G]	PE 3608/4710	PolyTech	ASTM D3035
1/2" DR 7[2]
1/2" DR 9[2]
1/2" DR 17[2] [3]
1/2" - 3" DR 11[2]
1/2" - 3" DR 13.5[2]
3/4" - 3" DR 7[2]
3/4" - 3" DR 9[2]
3/4" - 3" DR 17[2]
[2] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [2] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [3] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, Excel Fusion or WSLP Fusion. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

$ This product also meets the requirements for PE 3408 pipe tested in accordance with ASTM
  3350-02a.

Geothermal Applications

Product Type	Material Type	Trade Name	Product Standard
Pipe[1]	PE 3608/4710	PolyTech	ASTM D3035
1/2" DR 7[3]
3/4" - 3" DR 9
1/2" DR 9[3]
1/2" - 3" DR 11[3]
1/2" - 3" DR 13.5[3]
3/4" - 3" DR 7
3/4" - 3" DR 17
1/2" DR 17[2] [3]
[3] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. [3] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, WSLP Fusion or Excel Fusion.
Pipe[1]	PE 4710	PolyTech	AWWA C901
3/4" - 3" SDR 9
3/4" - 2" CTS SDR 9 Tubing
[1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, WSLP Fusion or Excel Fusion.

Polytubes 2009 Inc.
16221 - 123 Avenue
Edmonton, AB T5V 1N9
Canada
780-453-2211
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ ++	PE 4710	PT D47	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D47	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D47	ASTM F714
4" - 48" (IPS & DIPS) DR 7[2]
4" - 48" (IPS & DIPS) DR 7.3[2]
4" - 48" (IPS & DIPS) DR 9[2]
4" - 48" (IPS & DIPS) DR 11
4" - 48" (IPS & DIPS) DR 13.5
4" - 48" (IPS & DIPS) DR 15.5[2]
4" - 48" (IPS & DIPS) DR 17[2]
4" - 48" (IPS & DIPS) DR 21
4" - 48" (IPS & DIPS) DR 26[2]
4" - 48" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM D2737
1/2" - 5/8" SDR 7.3[1]
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM F714
4" - 48" (IPS & DIPS) DR 7[2]
4" - 48" (IPS & DIPS) DR 7.3[2]
4" - 48" (IPS & DIPS) DR 9[2]
4" - 48" (IPS & DIPS) DR 11
4" - 48" (IPS & DIPS) DR 13.5
4" - 48" (IPS & DIPS) DR 15.5[2]
4" - 48" (IPS & DIPS) DR 17[2]
4" - 48" (IPS & DIPS) DR 21
4" - 48" (IPS & DIPS) DR 26[2]
4" - 48" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	AWWA C906
4" - 48" (IPS & DIPS) SDR 7[2]
4" - 48" (IPS & DIPS) SDR 7.3[2]
4" - 48" (IPS & DIPS) SDR 9[2]
4" - 48" (IPS & DIPS) SDR 9.3[2]
4" - 48" (IPS & DIPS) SDR 11[2]
4" - 48" (IPS & DIPS) SDR 13.5
4" - 48" (IPS & DIPS) SDR 15.5[2]
4" - 48" (IPS & DIPS) SDR 17
4" - 48" (IPS & DIPS) SDR 21
4" - 48" (IPS & DIPS) SDR 26[2]
4" - 48" (IPS & DIPS) SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D247	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D247	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D247	ASTM F714
4" - 48" (IPS & DIPS) DR 7[2]
4" - 48" (IPS & DIPS) DR 7.3[2]
4" - 48" (IPS & DIPS) DR 9[2]
4" - 48" (IPS & DIPS) DR 11
4" - 48" (IPS & DIPS) DR 13.5
4" - 48" (IPS & DIPS) DR 15.5[2]
4" - 48" (IPS & DIPS) DR 17[2]
4" - 48" (IPS & DIPS) DR 21
4" - 48" (IPS & DIPS) DR 26[2]
4" - 48" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM F714
4" - 48" (IPS & DIPS) DR 7[2]
4" - 48" (IPS & DIPS) DR 7.3[2]
4" - 48" (IPS & DIPS) DR 9[2]
4" - 48" (IPS & DIPS) DR 11
4" - 48" (IPS & DIPS) DR 13.5
4" - 48" (IPS & DIPS) DR 15.5[2]
4" - 48" (IPS & DIPS) DR 17[2]
4" - 48" (IPS & DIPS) DR 21
4" - 48" (IPS & DIPS) DR 26[2]
4" - 48" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM F714
4" - 48" (IPS & DIPS) DR 7[2]
4" - 48" (IPS & DIPS) DR 7.3[2]
4" - 48" (IPS & DIPS) DR 9[2]
4" - 48" (IPS & DIPS) DR 11
4" - 48" (IPS & DIPS) DR 13.5
4" - 48" (IPS & DIPS) DR 15.5[2]
4" - 48" (IPS & DIPS) DR 17[2]
4" - 48" (IPS & DIPS) DR 21
4" - 48" (IPS & DIPS) DR 26[2]
4" - 48" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	AWWA C906
4" - 48" (IPS & DIPS) SDR 7[2]
4" - 48" (IPS & DIPS) SDR 7.3[2]
4" - 48" (IPS & DIPS) SDR 9[2]
4" - 48" (IPS & DIPS) SDR 9.3[2]
4" - 48" (IPS & DIPS) SDR 11[2]
4" - 48" (IPS & DIPS) SDR 13.5
4" - 48" (IPS & DIPS) SDR 15.5[2]
4" - 48" (IPS & DIPS) SDR 17
4" - 48" (IPS & DIPS) SDR 21
4" - 48" (IPS & DIPS) SDR 26[2]
4" - 48" (IPS & DIPS) SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM F714
4" - 48" (IPS & DIPS) DR 7[2]
4" - 48" (IPS & DIPS) DR 7.3[2]
4" - 48" (IPS & DIPS) DR 9[2]
4" - 48" (IPS & DIPS) DR 11
4" - 48" (IPS & DIPS) DR 13.5
4" - 48" (IPS & DIPS) DR 15.5[2]
4" - 48" (IPS & DIPS) DR 17[2]
4" - 48" (IPS & DIPS) DR 21
4" - 48" (IPS & DIPS) DR 26[2]
4" - 48" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	AWWA C906
4" - 48" (IPS & DIPS) SDR 7[2]
4" - 48" (IPS & DIPS) SDR 7.3[2]
4" - 48" (IPS & DIPS) SDR 9[2]
4" - 48" (IPS & DIPS) SDR 9.3[2]
4" - 48" (IPS & DIPS) SDR 11[2]
4" - 48" (IPS & DIPS) SDR 13.5
4" - 48" (IPS & DIPS) SDR 15.5[2]
4" - 48" (IPS & DIPS) SDR 17
4" - 48" (IPS & DIPS) SDR 21
4" - 48" (IPS & DIPS) SDR 26[2]
4" - 48" (IPS & DIPS) SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT D347	ASTM D2239
1/2" - 3" SIDR 5.3, 7, 9, 11.5, 15, 19
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 3" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	ASTM D2737
1/2" - 5/8" SDR 7.3[1]
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	AWWA C906
4" - 48" SDR 7[2]
4" - 48" SDR 7.3[2]
4" - 48" SDR 9[2]
4" - 48" SDR 9.3[2]
4" - 48" SDR 11[2]
4" - 48" SDR 13.5[2]
4" - 48" SDR 15.5[2]
4" - 48" SDR 17
4" - 48" SDR 21
4" - 48" SDR 26[2]
4" - 48" SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	ASTM F714
4" - 48" (IPS & DIPS) DR 7[2]
4" - 48" (IPS & DIPS) DR 7.3[2]
4" - 48" (IPS & DIPS) DR 9[2]
4" - 48" (IPS & DIPS) DR 11
4" - 48" (IPS & DIPS) DR 13.5
4" - 48" (IPS & DIPS) DR 15.5[2]
4" - 48" (IPS & DIPS) DR 17[2]
4" - 48" (IPS & DIPS) DR 21
4" - 48" (IPS & DIPS) DR 26[2]
4" - 48" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-IB47	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Facility : Peterborough, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ ++	PE 4710	PT D47	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D47	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D47	ASTM F714
4" - 36" (IPS & DIPS) DR 7[2]
4" - 36" (IPS & DIPS) DR 7.3[2]
4" - 36" (IPS & DIPS) DR 9[2]
4" - 36" (IPS & DIPS) DR 11
4" - 36" (IPS & DIPS) DR 13.5
4" - 36" (IPS & DIPS) DR 15.5[2]
4" - 36" (IPS & DIPS) DR 17[2]
4" - 36" (IPS & DIPS) DR 21
4" - 36" (IPS & DIPS) DR 26[2]
4" - 36" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM F714
4" - 36" (IPS & DIPS) DR 7[2]
4" - 36" (IPS & DIPS) DR 7.3[2]
4" - 36" (IPS & DIPS) DR 9[2]
4" - 36" (IPS & DIPS) DR 11
4" - 36" (IPS & DIPS) DR 13.5
4" - 36" (IPS & DIPS) DR 15.5[2]
4" - 36" (IPS & DIPS) DR 17[2]
4" - 36" (IPS & DIPS) DR 21
4" - 36" (IPS & DIPS) DR 26[2]
4" - 36" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	AWWA C906
4" - 42" (IPS & DIPS) SDR 7[2]
4" - 42" (IPS & DIPS) SDR 7.3[2]
4" - 42" (IPS & DIPS) SDR 9[2]
4" - 42" (IPS & DIPS) SDR 9.3[2]
4" - 42" (IPS & DIPS) SDR 11[2]
4" - 42" (IPS & DIPS) SDR 13.5
4" - 42" (IPS & DIPS) SDR 15.5[2]
4" - 42" (IPS & DIPS) SDR 17
4" - 42" (IPS & DIPS) SDR 21
4" - 42" (IPS & DIPS) SDR 26[2]
4" - 42" (IPS & DIPS) SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D247	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D247	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D247	ASTM F714
4" - 36" (IPS & DIPS) DR 7[2]
4" - 36" (IPS & DIPS) DR 7.3[2]
4" - 36" (IPS & DIPS) DR 9[2]
4" - 36" (IPS & DIPS) DR 11
4" - 36" (IPS & DIPS) DR 13.5
4" - 36" (IPS & DIPS) DR 15.5[2]
4" - 36" (IPS & DIPS) DR 17[2]
4" - 36" (IPS & DIPS) DR 21
4" - 36" (IPS & DIPS) DR 26[2]
4" - 36" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM F714
4" - 36" (IPS & DIPS) DR 7[2]
4" - 36" (IPS & DIPS) DR 7.3[2]
4" - 36" (IPS & DIPS) DR 9[2]
4" - 36" (IPS & DIPS) DR 11
4" - 36" (IPS & DIPS) DR 13.5
4" - 36" (IPS & DIPS) DR 15.5[2]
4" - 36" (IPS & DIPS) DR 17[2]
4" - 36" (IPS & DIPS) DR 21
4" - 36" (IPS & DIPS) DR 26[2]
4" - 36" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM F714
4" - 36" (IPS & DIPS) DR 7[2]
4" - 36" (IPS & DIPS) DR 7.3[2]
4" - 36" (IPS & DIPS) DR 9[2]
4" - 36" (IPS & DIPS) DR 11
4" - 36" (IPS & DIPS) DR 13.5
4" - 36" (IPS & DIPS) DR 15.5[2]
4" - 36" (IPS & DIPS) DR 17[2]
4" - 36" (IPS & DIPS) DR 21
4" - 36" (IPS & DIPS) DR 26[2]
4" - 36" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	AWWA C906
4" - 42" (IPS & DIPS) SDR 7[2]
4" - 42" (IPS & DIPS) SDR 7.3[2]
4" - 42" (IPS & DIPS) SDR 9[2]
4" - 42" (IPS & DIPS) SDR 9.3[2]
4" - 42" (IPS & DIPS) SDR 11[2]
4" - 42" (IPS & DIPS) SDR 13.5
4" - 42" (IPS & DIPS) SDR 15.5[2]
4" - 42" (IPS & DIPS) SDR 17
4" - 42" (IPS & DIPS) SDR 21
4" - 42" (IPS & DIPS) SDR 26[2]
4" - 42" (IPS & DIPS) SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1-1/4" DR 32.5[1] [2]
1-1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM F714
4" - 36" (IPS & DIPS) DR 7[2]
4" - 36" (IPS & DIPS) DR 7.3[2]
4" - 36" (IPS & DIPS) DR 9[2]
4" - 36" (IPS & DIPS) DR 11
4" - 36" (IPS & DIPS) DR 13.5
4" - 36" (IPS & DIPS) DR 15.5[2]
4" - 36" (IPS & DIPS) DR 17[2]
4" - 36" (IPS & DIPS) DR 21
4" - 36" (IPS & DIPS) DR 26[2]
4" - 36" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	AWWA C906
4" - 42" (IPS & DIPS) SDR 7[2]
4" - 42" (IPS & DIPS) SDR 7.3[2]
4" - 42" (IPS & DIPS) SDR 9[2]
4" - 42" (IPS & DIPS) SDR 9.3[2]
4" - 42" (IPS & DIPS) SDR 11[2]
4" - 42" (IPS & DIPS) SDR 13.5
4" - 42" (IPS & DIPS) SDR 15.5[2]
4" - 42" (IPS & DIPS) SDR 17
4" - 42" (IPS & DIPS) SDR 21
4" - 42" (IPS & DIPS) SDR 26[2]
4" - 42" (IPS & DIPS) SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT D347	ASTM D2239
1/2" - 3" SIDR 5.3, 7, 9, 11.5, 15, 19
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
3" SIDR 5.3[2]
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
3" SIDR 7[2]
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
3" SIDR 9[2]
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 3" SIDR 19[1]
3" SIDR 19[2]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	ASTM D2737
1/2" - 5/8" SDR 7.3[1]
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	AWWA C901
3/4" - 3" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	AWWA C906
4" - 42" SDR 7[2]
4" - 42" SDR 7.3[2]
4" - 42" SDR 9[2]
4" - 42" SDR 9.3[2]
4" - 42" SDR 11[2]
4" - 42" SDR 13.5
4" - 42" SDR 15.5[2]
4" - 42" SDR 17
4" - 42" SDR 21
4" - 42" SDR 26[2]
4" - 42" SDR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	ASTM F714
4" - 36" (IPS & DIPS) DR 7[2]
4" - 36" (IPS & DIPS) DR 7.3[2]
4" - 36" (IPS & DIPS) DR 9[2]
4" - 36" (IPS & DIPS) DR 11
4" - 36" (IPS & DIPS) DR 13.5
4" - 36" (IPS & DIPS) DR 15.5[2]
4" - 36" (IPS & DIPS) DR 17[2]
4" - 36" (IPS & DIPS) DR 21[2]
4" - 36" (IPS & DIPS) DR 26[2]
4" - 36" (IPS & DIPS) DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-IB47	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" - 3" DR 7.3[1] [2]
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1 1/4" DR 32.5[1] [2]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Pro-Flex, LLC
501 S State Road 341
P.O. Box 36
Hillsboro, IN 47949
United States
877-798-6291
765-798-6137
Visit this company's website

Facility : # 5 USA

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708	ProPoly	ASTM D2513
1/2" CTS X .090" WALL
1" CTS X .099" WALL
1/2" IPS DR 9.3
1 1/4" IPS DR 10
3/4", 1", 1 1/4", 1 1/2", 2" IPS DR 11
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

PT LESSO TECHNOLOGY INDONESIA
Jalan Semarang Demak
KM 14,7 BLOK D RT.001, RW.001
Desa/Kelurahan Batu, Kec., Karangtengah
Kab. Demak, Provinsi Jawa Tengah, 59561
Indonesia
62 24 764 42724

Facility : Jawa Tengah, Indonesia

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# [4]	PE 4710	Lesso	ASTM F714
3/4"-24" PE pipe DR 11
3/4"-24" PE pipe DR 9
# This product may be marked with an alternate trade name: Liansu. [4] Certification includes the following: ASTM F714 DIPS DR11: LE111-030 3" LE111-040 4" LE111-050 5" LE111-060 6" LE111-070 7" LE111-080 8" LE111-100 10" LE111-120 12" LE111-140 14" LE111-160 16" LE111-180 18" LE111-200 20" LE111-220 22" LE111-240 24" ASTM F714 IPS DR11: LE121-040 4" LE121-050 5" LE121-060 6" LE121-070 7" LE121-080 8" LE121-100 10" LE121-120 12" LE121-140 14" LE121-160 16" LE121-180 18" LE121-200 20" LE121-220 22" LE121-240 24" ASTM F714 DIPS DR9: LE112-030 3" LE112-040 4" LE112-050 5" LE112-060 6" LE112-070 7" LE112-080 8" LE112-100 10" LE112-120 12" LE112-140 14" LE112-160 16" LE112-180 18" LE112-200 20" LE112-220 22" LE112-240 24" ASTM F714 IPS DR9: LE122-040 4" LE122-050 5" LE122-060 6" LE122-070 7" LE122-080 8" LE122-100 10" LE122-120 12" LE122-140 14" LE122-160 16" LE122-180 18" LE122-200 20" LE122-220 22" LE122-240 24"
Pipe# [5] [6]	PE 4710	Lesso	ASTM D3035
3/4"-24" PE pipe DR 11
# This product may be marked with an alternate trade name: Liansu. [5] Certification includes the following: ASTM D3035 IPS DR11 [1]: LE022-007 3/4" LE022-010 1" LE022-012 1¼" LE022-015 1½" LE022-020 2" LE022-030 3" [6] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe # + [7] [G]	PE 4710	Lesso	ASTM F714
4" - 18" IPS DR 11
4" - 65" IPS DR 11[3]
[3] Certification includes the following: 1/2"-6" Sch80 PVC Pipe 071-025 2-1/2" 071-030 3" 071-040 4" 071-060 6" 071-005 1/2" 071-007 3/4" 071-020 2" 071-010 1" 071-012 1-1/4" 071-015 1-1/2" 081-025 2-1/2" 081-030 3" 081-040 4" 081-060 6" 081-005 1/2" 081-007 3/4" 081-020 2" 081-010 1" 081-012 1-1/4" 081-015 1-1/2" 071-001 1/8" 071-002 1/4" 071-003 3/8" 071-035 3-1/2" 071-050 5" 071-080 8" 071-100 10" 071-120 12" 071-140 14" 071-160 16" 071-180 18" 071-200 20" 071-240 24" 081-001 1/8" 081-002 1/4" 081-003 3/8" 081-035 3-1/2" 081-050 5" 081-080 8" 081-100 10" 081-120 12" 081-140 14" 081-160 16" 081-180 18" 081-200 20" 081-240 24" # This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [7] Certification includes the following: LE011-030 3 in LE011-040 4 in LE011-060 6 in LE011-080 8 in LE011-100 10 in LE011-120 12 in LE011-180 18 in [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# + [9] [G]	PE 4710	Lesso	ASTM F714
3/4"-24" PE pipe DR 9
3/4"-24" PE pipe DR 11
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [9] Certification includes the following: ASTM F714 DIPS DR11: LE111-030 3" LE111-040 4" LE111-050 5" LE111-060 6" LE111-070 7" LE111-080 8" LE111-100 10" LE111-120 12" LE111-140 14" LE111-160 16" LE111-180 18" LE111-200 20" LE111-220 22" LE111-240 24" ASTM F714 IPS DR11: LE121-040 4" LE121-050 5" LE121-060 6" LE121-070 7" LE121-080 8" LE121-100 10" LE121-120 12" LE121-140 14" LE121-160 16" LE121-180 18" LE121-200 20" LE121-220 22" LE121-240 24" ASTM F714 DIPS DR9: LE112-030 3" LE112-040 4" LE112-050 5" LE112-060 6" LE112-070 7" LE112-080 8" LE112-100 10" LE112-120 12" LE112-140 14" LE112-160 16" LE112-180 18" LE112-200 20" LE112-220 22" LE112-240 24" ASTM F714 IPS DR9: LE122-040 4" LE122-050 5" LE122-060 6" LE122-070 7" LE122-080 8" LE122-100 10" LE122-120 12" LE122-140 14" LE122-160 16" LE122-180 18" LE122-200 20" LE122-220 22" LE122-240 24" [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# + [G] [10] [11]	PE 4710	Lesso	ASTM D3035
3/4"-24" PE pipe DR 11
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] Certification includes the following: ASTM D3035 IPS DR11 LE022-007 3/4" LE022-010 1" LE022-012 1¼" LE022-015 1½" LE022-020 2" LE022-030 3" [11] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.

[8] Certification includes the following:
    4"-65" IPS DR11 PE pipe
    LE011-040 4"	
    LE011-050 5"	
    LE011-060 6"	
    LE011-070 7"	
    LE011-080 8"	
    LE011-100 10"	
    LE011-120 12"	
    LE011-140 14"	
    LE011-160 16"	
    LE011-180 18"	
    LE011-200 20”	
    LE011-220 22“	
    LE011-240 24”	
    LE011-260 26”	
    LE011-280 28“	
    LE011-300 30”	
    LE011-320 32“	
    LE011-340 34”	
    LE011-360 36“	
    LE011-420 42”	
    LE011-480 48“	
    LE011-540 54”	
    LE011-600 60“	
    LE011-630 63”	
    LE011-650 65“

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# [1]	PE 4710	Lesso	ASTM F714
3/4"-24" PE pipe DR 9
3/4"-24" PE pipe DR 11
# This product may be marked with an alternate trade name: Liansu. [1] Certification includes the following: ASTM F714 DIPS DR11: LE111-030 3" LE111-040 4" LE111-050 5" LE111-060 6" LE111-070 7" LE111-080 8" LE111-100 10" LE111-120 12" LE111-140 14" LE111-160 16" LE111-180 18" LE111-200 20" LE111-220 22" LE111-240 24" ASTM F714 IPS DR11: LE121-040 4" LE121-050 5" LE121-060 6" LE121-070 7" LE121-080 8" LE121-100 10" LE121-120 12" LE121-140 14" LE121-160 16" LE121-180 18" LE121-200 20" LE121-220 22" LE121-240 24" ASTM F714 DIPS DR9: LE112-030 3" LE112-040 4" LE112-050 5" LE112-060 6" LE112-070 7" LE112-080 8" LE112-100 10" LE112-120 12" LE112-140 14" LE112-160 16" LE112-180 18" LE112-200 20" LE112-220 22" LE112-240 24" ASTM F714 IPS DR9: LE122-040 4" LE122-050 5" LE122-060 6" LE122-070 7" LE122-080 8" LE122-100 10" LE122-120 12" LE122-140 14" LE122-160 16" LE122-180 18" LE122-200 20" LE122-220 22" LE122-240 24"
Pipe# [2] [3]	PE 4710	Lesso	ASTM D3035
3/4"-24" PE pipe DR 11
# This product may be marked with an alternate trade name: Liansu. [2] Certification includes the following: ASTM D3035 IPS DR11 LE022-007 3/4" LE022-010 1" LE022-012 1¼" LE022-015 1½" LE022-020 2" LE022-030 3" [3] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [2] [G]	PE 4710	Lesso	ASTM F714
4" - 18" IPS DR 11
3" - 18" DIPS DR 11
# This product may be marked with an alternate trade name: Liansu. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certification includes the following: LE011-030 3 in LE011-040 4 in LE011-060 6 in LE011-080 8 in LE011-100 10 in LE011-120 12 in LE011-180 18 in [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

[3] Certification includes the following:
    4"-65" IPS DR11 PE pipe
    LE011-040 4"	
    LE011-050 5"	
    LE011-060 6"	
    LE011-070 7"	
    LE011-080 8"	
    LE011-100 10"	
    LE011-120 12"	
    LE011-140 14"	
    LE011-160 16"	
    LE011-180 18"	
    LE011-200 20”	
    LE011-220 22“	
    LE011-240 24”	
    LE011-260 26”	
    LE011-280 28“	
    LE011-300 30”	
    LE011-320 32“	
    LE011-340 34”	
    LE011-360 36“	
    LE011-420 42”	
    LE011-480 48“	
    LE011-540 54”	
    LE011-600 60“	
    LE011-630 63”	
    LE011-650 65“

Qualpol, LLC
946 West Main
Jerome, ID 83338
United States
208-324-1314
Visit this company's website

Facility : Jerome, ID

Irrigation - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 3608	QualPol Turf Irrigation		*SE 30288*
3/4" - 2" SIDR 15
3/4" - 2" SIDR 19

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	QualPol IdaQual	ASTM D3035
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
1/2" DR 9[1]
3/4" - 3" DR 7
3/4" - 3" DR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol Blue Water	ASTM D2239
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol Potable Water	ASTM D2239
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol Blue Water	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol Potable Water	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol IdaQual	AWWA C901
3/4" - 2" CTS SDR 9
3/4" - 3" IPS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol Blue Water	AWWA C901
3/4" - 2" CTS SDR 9
3/4" - 3" IPS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol Potable Water	AWWA C901
3/4" - 2" CTS SDR 9
3/4" - 3" IPS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol IdaQual	AWWA C906
4" DR 7
4" DR 9
4" DR 11
4" DR 13.5
4" DR 17
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Saudi Arabian Basic Corporation (SABIC)
P.O. Box 5101
Riyadh 11422
Saudi Arabia
966 1225 8000
Visit this company's website

Facility : Al Jubail, Saudi Arabia

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710^ ** ++	1	P6006AD	ASTM D3350 445574C
PE 100^ ** ++	1	P6006AD	ASTM D3350 445574C
PE 4710^ ++	1	P6006NA	ASTM D3350 445574A
PE 4710^ ++ [1]	1	P6006NA/PE-535-42	ASTM D3350 445574C
^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. ** Black material. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Salt/Pepper blend.

Facility : Yanbu, Saudi Arabia

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710^ ** ++ [2]	1	P6006N	ASTM D3350 447574A
PE 4710^ ++ [1] [2]	1	P6006N/IPBK010A	ASTM D3350 447574C
PE 4710^ ++ [1] [2]	1	P6006N/PE-535-42	ASTM D3350 447574C
^ Material listed to ASTM D3350 and CSA B137.1 with a cell class of 447574A or 447574C. Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. ** Natural material. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Salt/Pepper blend. [2] Flexural modulus is 130,000 - 180,000 psi.

TALDEEN Plastic Solutions Co Ltd
Street 21 Industrial Area
P.O. Box 6382
Hail 554144915
Saudi Arabia
966 16 538 6427

Facility : Hail, Saudi Arabia

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe++ [1]	PE	PE-100 Pipe	DIN 8074/8075
20 mm - 1600 mm
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [1] Only products bearing the NSF Mark on the product, product packaging, and/or documentation shipped with the product are Certified.

Teel Pipe LLC.
500 Industrial Court
Baraboo, WI 53913
United States
608-355-3080
Visit this company's website

Facility : Baraboo, WI

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +*	PE 4710	Teel Plastics PE4710 Pressure Pipe	FM 1613
IPS 2", 3", 4", & 6" (PC 250) DR 9
IPS 2", 3", 4", & 6" (PC 200) DR 11
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	Teel Plastics PE4710 Pressure Pipe	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Teel Plastics PE4710 Pressure Pipe	AWWA C906
4" - 8" DR 7
4" - 8" DR 9
4" - 8" DR 11
4" - 8" DR 13.5
4" - 8" DR 15.5[2]
4" - 8" DR 17
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Teel Plastics PE4710 Pressure Pipe	ASTM D2737
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
3/4" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Teel Plastics PE4710 Pressure Pipe	ASTM D3035
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11[1]
3/4" - 3" SDR 13.5[1]
3/4" - 3" SDR 15.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Teel Plastics PE 4710 Pressure Pipe	ASTM F714
4" - 8" SDR 7
4" - 8" SDR 9
4" - 8" SDR 11
4" - 8" SDR 13.5
4" - 8" SDR 15.5[2]
4" - 8" SDR 17
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Geothermal Applications

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	Teel Plastics PE4710 Pressure Pipe	ASTM D2737
3/4" - 2" SDR 9
3/4" - 2" SDR 11
3/4" - 2" SDR 15.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Teel Plastics PE4710 Pressure Pipe	ASTM D3035
3/4" - 2" SDR 15.5
3/4" - 8" SDR 9
3/4" - 8" SDR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Tex-Trude Pipe Co., LLC.
2009 Sheldon Road
P.O. Box 1759
Channelview, TX 77530
United States
281-864-5219

Facility : Channelview, TX

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + ^*	PE	NEXT-PIPE L-23	ASTM F714
IPS - 4", 6", 8", 10", 12", 14",16", 18", 20", 24" SDR 7
IPS - 28", 30", 32", 36", 42" SDR 7[1]
IPS -4", 6", 8", 10", 12", 14", 16", 18", 20", 24" SDR 9
IPS - 20", 24", 28", 30", 32", 36" SDR 9
IPS - 42" SDR 9[1]
IPS - 4", 6", 8", 10", 12", 14", 16", 18" SDR 11, 13.5, 17, 21
IPS - 20", 24", 28", 30", 32", 36", 42" SDR 11, 13.5, 17, 21
DIPS -4",6”, 8”, 10”, 12”, 14", 16”, 18”, 20”, 24" SDR 7
DIPS - 28", 30", 32", 36" SDR 7[1]
DIPS -4",6”, 8”, 10”, 12”, 14", 16”, 18”, 20”, 24" SDR 9
DIPS - 28", 30", 32", 36" SDR 9[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 11
DIPS - 20”, 24", 30", 36" SDR 11
DIPS - 28", 32" SDR 11[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18" SDR 13.5
DIPS - 20”, 24", 30", 36" SDR 13.5
DIPS - 28", 32" SDR 13.5[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 17
DIPS - 20”, 24", 30", 36" SDR 17
DIPS - 28", 32" SDR 17[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 21
DIPS - 20”, 24", 30", 36" SDR 21
DIPS - 28", 32" SDR 21[1]
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + ^*	PE	NEXT-PIPE L-23	AWWA C906
IPS - 4", 6", 8", 12", 14", 20", 24" SDR 7, 9, 11, 13.5, 17, 21
IPS - 28", 30", 32", 36", 42" SDR 7[1]
IPS -4", 6", 8", 12", 14", 20", 24", 28", 30", 32" SDR 9
IPS - 36", 42" SDR 9[1]
IPS - 4",6",8",12",14",20",24",28",30",32",36",42" SDR 11, 13.5, 17, 21
DIOD - 4",6",8",10",12",14",16",18",20",24" SDR 7
DIOD - 28", 30", 32", 36" SDR 7[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",30" SDR 9
DIOD - 28", 32", 36" SDR 9[1]
DIOD -4",6",8",10",12",14",16",18",20",24",30",36" SDR 11
DIOD - 28", 32" SDR 11[1]
DIOD -4",6",8",10",12",14",16",18",20",24",30",36" SDR 13.5
DIOD - 28", 32" SDR 13.5[1]
DIOD -4",6",8",10",12",14",16",18",20",24",30",36" SDR 17
DIOD - 28", 32" SDR 17[1]
DIOD -4",6",8",10",12",14",16",18",20",24",30",36" SDR 21
DIOD - 28", 32" SDR 21[1]
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + ^*	PE	NEXT-PIPE CP-23	ASTM F714
IPS - 4", 6", 8", 10", 12", 14",16", 18", 20", 24" SDR 7
IPS - 28", 30", 32", 36", 42" SDR 7[1]
IPS -4", 6", 8", 10", 12", 14", 16", 18", 20", 24" SDR 9
IPS - 20", 24", 28", 30", 32", 36" SDR 9
IPS - 42" SDR 9[1]
IPS - 4", 6", 8", 10", 12", 14", 16", 18" SDR 11, 13.5, 17, 21
IPS - 20", 24", 28", 30", 32", 36", 42" SDR 11, 13.5, 17, 21
DIPS -4",6”, 8”, 10”, 12”, 14", 16”, 18”, 20”, 24" SDR 7
DIPS - 28", 30", 32", 36" SDR 7[1]
DIPS -4",6”, 8”, 10”, 12”, 14", 16”, 18”, 20”, 24" SDR 9
DIPS - 28'', 30", 32'', 36" SDR 9[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 11
DIPS - 20”, 24", 30", 36" SDR 11
DIPS - 28'', 32'' SDR 11[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18" SDR 13.5
DIPS - 20”, 24", 30", 36" SDR 13.5
DIPS - 28'', 32'' SDR 13.5[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 17
DIPS - 20”, 24", 30", 36" SDR 17
DIPS - 28'', 32'' SDR 17[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 21
DIPS - 20”, 24", 30", 36" SDR 21
DIPS - 28'', 32'' SDR 21[1]
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + ^*	PE	NEXT-PIPE CP-23	AWWA C906
IPS - 4", 6", 8", 12", 14", 20", 24" SDR 7, 9, 11, 13.5, 17, 21
IPS - 28", 30", 32", 36", 42" SDR 7[1]
IPS -4", 6", 8", 12", 14", 20", 24", 28", 30", 32" SDR 9
IPS - 36", 42" SDR 9[1]
IPS - 4",6",8",12",14",20",24",28",30",32",36",42" SDR 11, 13.5, 17, 21
DIOD - 4",6",8",10",12",14",16",18",20",24" SDR 7
DIOD - 28", 30", 32", 36" SDR 7[1]
DIOD - 4",6",8",10",12",14",16",18",20",24" SDR 9
DIOD - 28", 30", 32", 36" SDR 9[1]
DIOD -4",6",8",10",12",14",16",18",20",24",30",36" SDR 11
DIOD - 28", 32" SDR 11[1]
DIOD -4",6",8",10",12",14",16",18",20",24",30",36" SDR 13.5
DIOD - 28", 32" SDR 13.5[1]
DIOD -4",6",8",10",12",14",16",18",20",24",30",36" SDR 17
DIOD - 28", 32" SDR 17[1]
DIOD -4",6",8",10",12",14",16",18",20",24",30",36" SDR 21
DIOD - 28", 32" SDR 21[1]
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Thai Polyethylene Co., Ltd.
10 I-1 Road Map Ta Phut Industrial
Estate, Muang District
Rayong 21150
Thailand
66 3868 3393
Visit this company's website

Facility : Muang Rayong, Thailand

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100# +	3	SCGC HDPE H112PC	ASTM D3350 445576C
PE 4710# +	3	SCGC HDPE H112PC	ASTM D3350 445574C
# Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Trinus Pipes & Tubes Ltd.
699 Welham Road
Barrie, ON L4N 6C5
Canada
705-721-0216

Facility : Barrie, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ~ [G]	PE 4710	Trinus Pipes & Tubes, Ltd.	ASTM F714
4" IPS DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ This product may be marked with an alternate tradename: Tridrop. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ~ [G]	PE 4710	Trinus Pipes & Tubes Ltd.	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5[1]
1/2" - 2" SIDR 15.0[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ This product may be marked with an alternate tradename: Tridrop. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ~ [G]	PE 4710	Trinus Pipes & Tubes Ltd.	ASTM D3035
1/2" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ This product may be marked with an alternate tradename: Tridrop. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ~ [G]	PE 4710	Trinus Pipes & Tubes Ltd.	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ This product may be marked with an alternate tradename: Tridrop. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ~ ¢ [G]	PE 4710	Trinus Pipes & Tubes Ltd.	CSA B137.1
3/4" - 4"
Series 100
Series 125
Series 160
Series 200
Series 250
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ~ This product may be marked with an alternate tradename: Tridrop. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Geothermal Applications

Product Type	Material Type	Trade Name	Product Standard
Pipe¢	PE 3608	Tri Fuse	CSA B137.1
3/4" - 4"
Series 125
Series 160
Series 200
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe¢	PE 4710	Tri Fuse	CSA B137.1
3/4" - 4"
Series 125
Series 160
Series 200
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe ¢*	PE 3608	Tri Fuse	CSA C448
3/4" - 4"
Series 125
Series 160
Series 200
* Product meets the requirements of Section 5.2 Underground Piping Materials and Series Requirements of CSA C448. Installation in accordance with manufacturer's instructions and requirements of CSA C448. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe ¢*	PE 4710	Tri Fuse	CSA C448
3/4" - 4"
Series 125
Series 160
Series 200
* Product meets the requirements of Section 5.2 Underground Piping Materials and Series Requirements of CSA C448. Installation in accordance with manufacturer's instructions and requirements of CSA C448. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Versaprofiles Product Inc.
154 Principale Street
Saint-Lazare de Bellechasse, QC G0R 3J0
Canada
877-335-7473
418-883-2036

Facility : Saint-Lazare de Bellechasse, Québec, Canada

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PE 2708	Versapipe 2708 Gas	ASTM D2513
1/2" CTS^
1" CTS^^
3/4" IPS SDR 11
3/4" IPS SDR 13.5
3/4" IPS SDR 17
3/4" IPS SDR 21
1" IPS SDR 11
1" IPS SDR 13.5
1" IPS SDR 17
1" IPS SDR 21
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/4" IPS SDR 21
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
1 1/2" IPS SDR 21
2" IPS SDR 11
2" IPS SDR 13.5
2" IPS SDR 17
2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 13.5
3" IPS SDR 17
3" IPS SDR 21
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
4" IPS SDR 19
4" IPS SDR 21
6" IPS SDR 11
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
6" IPS SDR 23.7
6" IPS SDR 26
6" IPS SDR 32.5
8" IPS SDR 11
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
8" IPS SDR 26
8" IPS SDR 32.5
^ 1/2" CTS 0.090 Wall ^^ 1" CTS 0.099 Wall * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe §*	PE 2708	Versapipe 2708 BM Gas	ASTM D2513
1/2" CTS^
1" CTS^^
3/4" IPS SDR 11
3/4" IPS SDR 13.5
3/4" IPS SDR 17
3/4" IPS SDR 21
1" IPS SDR 11
1" IPS SDR 13.5
1" IPS SDR 17
1" IPS SDR 21
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/4" IPS SDR 21
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
1 1/2" IPS SDR 21
2" IPS SDR 11
2" IPS SDR 13.5
2" IPS SDR 17
2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 13.5
3" IPS SDR 17
3" IPS SDR 21
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
4" IPS SDR 19
4" IPS SDR 21
6" IPS SDR 11
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
6" IPS SDR 23.7
6" IPS SDR 26
6" IPS SDR 32.5
8" IPS SDR 11
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
8" IPS SDR 26
8" IPS SDR 32.5
^ 1/2" CTS 0.090 Wall ^^ 1" CTS 0.099 Wall * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe ¢*	PE 2708	Versapipe 2708 Gas	CSA B137.4
1/2" CTS^
1" CTS^^
3/4" IPS SDR 11
3/4" IPS SDR 13.5
3/4" IPS SDR 17
3/4" IPS SDR 21
1" IPS SDR 11
1" IPS SDR 13.5
1" IPS SDR 17
1" IPS SDR 21
1 1/4" IPS SDR 10
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 11
1 1/4" IPS SDR 17
1 1/4" IPS SDR 21
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
1 1/2" IPS SDR 21
2" IPS SDR 17
2" IPS SDR 11
2" IPS SDR 13.5
2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 13.5
3" IPS SDR 17
3" IPS SDR 21
4" IPS SDR 11
4" IPS SDR 13.5
4" IPS SDR 17
4" IPS SDR 21
6" IPS SDR 11
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
8" IPS SDR 26
8" IPS SDR 32.5
^ 1/2" CTS 0.090 Wall ^^ 1" CTS 0.099 Wall * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe ¢*	PE 2708	Versapipe 2708 BM Gas	CSA B137.4
1/2" CTS^
1" CTS^^
3/4" IPS SDR 11
3/4" IPS SDR 13.5
3/4" IPS SDR 17
3/4" IPS SDR 21
1" IPS SDR 11
1" IPS SDR 13.5
1" IPS SDR 17
1" IPS SIDR 21
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/4" IPS SDR 21
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
1 1/2" IPS SDR 21
2" IPS SDR 11
2" IPS SDR 17
2" IPS SDR 13.5
2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 13.5
3" IPS SDR 17
3" IPS SDR 17
3" IPS SDR 21
4" IPS SDR 11
4" IPS SDR 13.5
4" IPS SDR 17
4" IPS SDR 21
6" IPS SDR 11
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
8" IPS SDR 11
8" IPS SDR 13.5
8" IPS SDR 17
8" IPS SDR 21
8" IPS SDR 26
8" IPS SDR 32.5
^ 1/2" CTS 0.090 Wall ^^ 1" CTS 0.099 Wall * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe §*	PE 4710	VERSAPIPE 4710 GAS	ASTM D2513
1/2" CTS^
1" CTS^^
3/4" IPS SDR 11
3/4" IPS SIDR 13.5
3/4" IPS SDR 17
3/4" IPS SDR 21
1" IPS SDR 11
1" IPS SDR 13.5
1" IPS SDR 17
1" IPS SDR 21
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/4" IPS SDR 21
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
1 1/2" IPS SDR 21
2" IPS SDR 11
2" IPS SDR 13.5
2" IPS SDR 17.5
2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 13.5
3" IPS SDR 17
3" IPS SDR 21
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
4" IPS SDR 19
4" IPS SDR 21
6" IPS SDR 11
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
6" IPS SDR 23.7
6" IPS SDR 26
6" IPS SDR 32.5
8" IPS SDR 11
8" IPS SDR 13.5
10" IPS SDR 13.5
10" IPS SDR 13.5
^ 1/2" CTS 0.090 Wall ^^ 1" CTS 0.099 Wall * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe ¢*	PE 4710	VERSAPIPE 4710 GAS	CSA B137.4
1/2" CTS^
1" CTS^^
3/4" IPS SDR 11
3/4" IPS SDR 13.5
3/4" IPS SDR 17
3/4" IPS SDR 21
1" IPS SDR 11
1" IPS SDR 13.5
1" IPS SDR 17
1" IPS SDR 21
1 1/4" IPS SDR 10
1 1/4" IPS SDR 11
1 1/4" IPS SDR 13.5
1 1/4" IPS SDR 17
1 1/4" IPS SDR 21
1 1/2" IPS SDR 11
1 1/2" IPS SDR 13.5
1 1/2" IPS SDR 17
1 1/2" IPS SDR 21
2" IPS SDR 11
2" IPS SDR 13.5
2" IPS SDR 17
2" IPS SDR 21
3" IPS SDR 11
3" IPS SDR 13.5
3" IPS SDR 17
3" IPS SDR 21
4" IPS SDR 11
4" IPS SDR 11.5
4" IPS SDR 13.5
4" IPS SDR 17
4" IPS SDR 19
4" IPS SDR 21
6" IPS SDR 11
6" IPS SDR 13.5
6" IPS SDR 17
6" IPS SDR 21
6" IPS SDR 23.7
6" IPS SDR 26
6" IPS SDR 32.5
8" IPS SDR 11
8" IPS SDR 13.5
10" IPS SDR 11
10" IPS SDR 13.5
^ 1/2" CTS 0.090 Wall ^^ 1" CTS 0.099 Wall * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing+ §	PE 4710	Versapipe HD100PW	ASTM D3035
1/2" DR 7[1]
3/4 - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 9.3[1] [2]
1/2" - 3" DR 11[1]
1/2" - 3" SDR 17 DR 13.5[1]
1/2" SDR 21 DR 15.5[1] [2]
3/4" - 3" DR 15.5[1]
1/2" DR 17[1] [2]
3/4" - 3" DR 17[1]
1/2" - 3/4" DR 21[1] [2]
1" - 3" DR 21[1]
1/2" - 3/4" DR 26[1] [2]
1" - 3" DR 26[1]
1/2" - 1 1/4" DR 32.5[1] [2]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing+ §	PE 4710	Versapipe HD100PW	ASTM D2239
1/2" SIDR 5.3[1]
3/4" - 2" SIDR 5.3
1/2" SIDR 7[1]
3/4" - 2" SIDR 7
1/2" SIDR 9[1]
3/4" - 2" SIDR 9
1/2" - 3" SIDR 11.5[1]
1/2" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing+ §	PE 4710	Versapipe HD100PW	AWWA C901
3/4" - 3" SIDR 9
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Tubing+ [3]	PE 4710	Versapipe HD100PW	AWWA C906
4" - 10" IPS DR 7.3[2]
4" - 10" IPS DR 9
4" - 10" IPS DR 9.3[2]
4" - 10" IPS DR 11
4" - 10" IPS DR 13.5
4" - 10" IPS DR 15.5[2]
4" - 10" IPS DR 17
4" - 10" IPS DR 21
4" - 10" IPS DR 26[2]
4" - 10" IPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [3] This facility may add post-production perforations to meet a purchasing specification. Pipe with perforations is not considered certified.
Tubing+ ¢ § [3]	PE 4710	Versapipe HD100PW	ASTM F714
3" - 12" DIPS DR 5.6[2]
3" - 12" DIPS DR 6.3[2]
3" - 12" DIPS DR 6.7[2]
3" - 12" DIPS DR 7
3" - 12" DIPS DR 7.4[2]
3" - 12" DIPS DR 7.7[2]
3" - 12" DIPS DR 9
3" - 12" DIPS DR 11
3" - 12" DIPS DR 11.7[2]
3" - 12" DIPS DR 13.5
3" - 12" DIPS DR 14.3[2]
3" - 12" DIPS DR 15.5[2]
3" - 12" DIPS DR 17
3" - 12" DIPS DR 17
3" - 12" DIPS DR 21
4" - 12" IPS DR 7
4" - 12" IPS DR 9
4" - 12" IPS DR 9.3[2]
4" - 12" IPS DR 11
4" - 12" IPS DR 13.5
4" - 12" IPS DR 15.5[2]
4" - 12" IPS DR 17
4" - 12" IPS DR 21
4" - 12" IPS DR 26
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This facility may add post-production perforations to meet a purchasing specification. Pipe with perforations is not considered certified.
Tubing+ ¢ § [3]	PE 4710	Versapipe HD100PW	CSA B137.1
1/2" - 6" Series 50
1/2" - 6" Series 60
1/2" - 6" Series 75
1/2" - 6" Series 80
1/2" - 6" Series 100
1/2" - 6" Series 125
1/2" - 6" Series 160
1/2" - 6" Series 200
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] This facility may add post-production perforations to meet a purchasing specification. Pipe with perforations is not considered certified.

Geothermal Applications

Product Type	Material Type	Trade Name	Product Standard
Tubing^ ¢ ¥	PE 4710	Versapipe HD100GEO	CSA B137.1
3/4" Series 160, 200, 250
1" Series 125, 160, 200, 250
1 1/4" Series 125, 160, 200, 250
1 1/2" Series 125, 160, 200, 250
2" Series 100, 125, 160, 200, 250
3" Series 100, 125, 160, 200, 250
4" Series 100, 125, 160, 200, 250
^ Certified product may include a U-bend fitting. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ¥ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™.
Tubing% ^ ¢	PE 4710	Versapipe HD100GEO	ANSI/CSA C448
3/4" Series 160, 200, 250
1" Series 125, 160, 200, 250
1 1/4" Series 125, 160, 200, 250
1 1/2" Series 125, 160, 200, 250
2" Series 100, 125, 160, 200, 250
3" Series 100, 125, 160, 200, 250
4" Series 100, 125, 160, 200, 250
% Product meets the requirements of Section 5.2 Underground Piping Materials and Series Requirements of CSA C448. Installation in accordance with manufacturer’s instructions and requirements of CSA C448. ^ Certified product may include a U-bend fitting. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Viaflex, Inc.
821 West Algonquin Street
Sioux Falls, SD 57104
United States
605-335-0174
Visit this company's website

Facility : Brandon, SD

Irrigation - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 3608/4710	TurfFlex		*SE 30288*
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
3/4" - 2" SIDR 11.5
3/4" - 2" SIDR 15
3/4" - 2" SIDR 19

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ [G]	PE 4710	Viaflex Industrial Pipe	ASTM D3035
3/4" - 3" DR 7
3/4" - 3" DR 9
3/4" - 3" DR 11[1]
3/4" - 3" DR 13.5[1]
3/4" - 3" DR 15[1]
3/4" - 3" DR 17[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ All sizes and wall thicknesses are listed to U.P Code. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Viaflex Industrial Pipe	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
3/4" - 2" SIDR 11.5[1]
3/4" - 2" SIDR 15[1]
3/4" - 2" SIDR 19[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ All sizes and wall thicknesses are listed to U.P Code. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Viaflex Industrial Pipe	ASTM D2737
3/4" - 2" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ All sizes and wall thicknesses are listed to U.P Code. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Viaflex Industrial Pipe	AWWA C901
3/4" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ All sizes and wall thicknesses are listed to U.P Code. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Viaflex Industrial Pipe	AWWA C906
4" SDR 7
4" SDR 9
4" SDR 11
4" SDR 13.5
4" SDR 15.5[2]
4" SDR 17
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ All sizes and wall thicknesses are listed to U.P Code. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ ^ [G]	PE 4710	Viaflex Industrial Pipe	ASTM F714
4" SDR 7
4" SDR 9
4" SDR 11
4" SDR 13.5
4" SDR 15.5[2]
4" SDR 17
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ All sizes and wall thicknesses are listed to U.P Code. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe@ ^	PE 4710	Viaflex Industrial Pipe	ASTM D3035
3/4" - 3" DR 7
3/4" - 3" DR 9
3/4" - 3" DR 11
3/4" - 3" DR 13.5
3/4" - 3" DR 15
3/4" - 3" DR 17
@ Certified for purple color. ^ All sizes and wall thicknesses are listed to U.P Code.
Pipe@ ^	PE 4710	Viaflex Industrial Pipe	ASTM D2239
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
3/4" - 2" SIDR 11.5
3/4" - 2" SIDR 15
3/4" - 2" SIDR 19
@ Certified for purple color. ^ All sizes and wall thicknesses are listed to U.P Code.
Pipe@ ^	PE 4710	Viaflex Industrial Pipe	ASTM D2737
3/4" - 2" DR 9
@ Certified for purple color. ^ All sizes and wall thicknesses are listed to U.P Code.
Pipe^	PE 4710	Viaflex Industrial Pipe	AWWA C901
3/4" - 3" SDR 9
^ All sizes and wall thicknesses are listed to U.P Code.
Pipe^	PE 4710	Viaflex Industrial Pipe	AWWA C906
4" SDR 7
4" SDR 9
4" SDR 11
4" SDR 13.5
4" SDR 15.5[1]
4" SDR 17
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. ^ All sizes and wall thicknesses are listed to U.P Code.
Pipe@ ^	PE 4710	Viaflex Industrial Pipe	ASTM F714
4" SDR 7
4" SDR 9
4" SDR 11
4" SDR 13.5
4" SDR 15.5[1]
4" SDR 17
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure that the product is suitable for the intended application. @ Certified for purple color. ^ All sizes and wall thicknesses are listed to U.P Code.

Viterra Systems LLC
1830 Flower Ave.
Duarte, CA 91010
United States
626-716-2238

Facility : Jawa Tengah, Indonesia

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[4]	PE 4710	Viterra	ASTM F714
3/4"-24" PE pipe DR 9
[4] Certification includes the following: ASTM F714 DIPS DR11: VE111-030 3" VE111-040 4" VE111-050 5" VE111-060 6" VE111-070 7" VE111-080 8" VE111-100 10" VE111-120 12" VE111-140 14" VE111-160 16" VE111-180 18" VE111-200 20" VE111-220 22" VE111-240 24" ASTM F714 IPS DR11: VE121-040 4" VE121-050 5" VE121-060 6" VE121-070 7" VE121-080 8" VE121-100 10" VE121-120 12" VE121-140 14" VE121-160 16" VE121-180 18" VE121-200 20" VE121-220 22" VE121-240 24" ASTM F714 DIPS DR9: VE112-030 3" VE112-040 4" VE112-050 5" VE112-060 6" VE112-070 7" VE112-080 8" VE112-100 10" VE112-120 12" VE112-140 14" VE112-160 16" VE112-180 18" VE112-200 20" VE112-220 22" VE112-240 24" ASTM F714 IPS DR9: VE122-040 4" VE122-050 5" VE122-060 6" VE122-070 7" VE122-080 8" VE122-100 10" VE122-120 12" VE122-140 14" VE122-160 16" VE122-180 18" VE122-200 20" VE122-220 22" VE122-240 24"
Pipe[5] [6]	PE 4710	Viterra	ASTM D3035
3/4"-24" PE pipe DR 11
[5] Certification includes the following: ASTM D3035 IPS DR11 [1]: VE022-007 3/4" VE022-010 1" VE022-012 1¼" VE022-015 1½" VE022-020 2" VE022-030 3" [6] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
Pipe[4]	PE 4710	Viterra	ASTM F714
3/4"-24" PE pipe DR 11
[4] Certification includes the following: ASTM F714 DIPS DR11: VE111-030 3" VE111-040 4" VE111-050 5" VE111-060 6" VE111-070 7" VE111-080 8" VE111-100 10" VE111-120 12" VE111-140 14" VE111-160 16" VE111-180 18" VE111-200 20" VE111-220 22" VE111-240 24" ASTM F714 IPS DR11: VE121-040 4" VE121-050 5" VE121-060 6" VE121-070 7" VE121-080 8" VE121-100 10" VE121-120 12" VE121-140 14" VE121-160 16" VE121-180 18" VE121-200 20" VE121-220 22" VE121-240 24" ASTM F714 DIPS DR9: VE112-030 3" VE112-040 4" VE112-050 5" VE112-060 6" VE112-070 7" VE112-080 8" VE112-100 10" VE112-120 12" VE112-140 14" VE112-160 16" VE112-180 18" VE112-200 20" VE112-220 22" VE112-240 24" ASTM F714 IPS DR9: VE122-040 4" VE122-050 5" VE122-060 6" VE122-070 7" VE122-080 8" VE122-100 10" VE122-120 12" VE122-140 14" VE122-160 16" VE122-180 18" VE122-200 20" VE122-220 22" VE122-240 24"

# This product may be marked with an alternate trade name: Liansu.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [7] [G]	PE 4710	Viterra	ASTM F714
3" - 18" DIPS DR 11
4" - 18" IPS DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [7] Certification includes the following: VE011-030 3 in VE011-040 4 in VE011-060 6 in VE011-080 8 in VE011-100 10 in VE011-120 12 in VE011-180 18 in [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [7] [G]	PE 4710	Viterra	ASTM F714
3" - 18" DIPS DR 11
4" - 18" IPS DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [7] Certification includes the following: VE011-030 3 in VE011-040 4 in VE011-060 6 in VE011-080 8 in VE011-100 10 in VE011-120 12 in VE011-180 18 in [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe[8]	PE 4710	Viterra	ASTM F714
3/4"-24" PE pipe DR 9
3/4"-24" PE pipe DR 11
[8] Certification includes the following: ASTM F714 DIPS DR11: VE111-030 3" VE111-040 4" VE111-050 5" VE111-060 6" VE111-070 7" VE111-080 8" VE111-100 10" VE111-120 12" VE111-140 14" VE111-160 16" VE111-180 18" VE111-200 20" VE111-220 22" VE111-240 24" ASTM F714 IPS DR11: VE121-040 4" VE121-050 5" VE121-060 6" VE121-070 7" VE121-080 8" VE121-100 10" VE121-120 12" VE121-140 14" VE121-160 16" VE121-180 18" VE121-200 20" VE121-220 22" VE121-240 24" ASTM F714 DIPS DR9: VE112-030 3" VE112-040 4" VE112-050 5" VE112-060 6" VE112-070 7" VE112-080 8" VE112-100 10" VE112-120 12" VE112-140 14" VE112-160 16" VE112-180 18" VE112-200 20" VE112-220 22" VE112-240 24" ASTM F714 IPS DR9: VE122-040 4" VE122-050 5" VE122-060 6" VE122-070 7" VE122-080 8" VE122-100 10" VE122-120 12" VE122-140 14" VE122-160 16" VE122-180 18" VE122-200 20" VE122-220 22" VE122-240 24"
Pipe[9] [G] [10]	PE 4710	Viterra	ASTM D3035
3/4"-24" PE pipe DR 11
[9] Certification includes the following: ASTM D3035 IPS DR11 [1]: VE022-007 3/4" VE022-010 1" VE022-012 1¼" VE022-015 1½" VE022-020 2" VE022-030 3" [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [10] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[1]	PE 4710	Viterra	ASTM F714
3/4"-24" PE pipe DR 11
3/4"-24" PE pipe DR 9
[1] Certification includes the following: ASTM F714 DIPS DR11: VE111-030 3" VE111-040 4" VE111-050 5" VE111-060 6" VE111-070 7" VE111-080 8" VE111-100 10" VE111-120 12" VE111-140 14" VE111-160 16" VE111-180 18" VE111-200 20" VE111-220 22" VE111-240 24" ASTM F714 IPS DR11: VE121-040 4" VE121-050 5" VE121-060 6" VE121-070 7" VE121-080 8" VE121-100 10" VE121-120 12" VE121-140 14" VE121-160 16" VE121-180 18" VE121-200 20" VE121-220 22" VE121-240 24" ASTM F714 DIPS DR9: VE112-030 3" VE112-040 4" VE112-050 5" VE112-060 6" VE112-070 7" VE112-080 8" VE112-100 10" VE112-120 12" VE112-140 14" VE112-160 16" VE112-180 18" VE112-200 20" VE112-220 22" VE112-240 24" ASTM F714 IPS DR9: VE122-040 4" VE122-050 5" VE122-060 6" VE122-070 7" VE122-080 8" VE122-100 10" VE122-120 12" VE122-140 14" VE122-160 16" VE122-180 18" VE122-200 20" VE122-220 22" VE122-240 24
Pipe[2] [3]	PE 4710	Viterra	ASTM D3035
3/4"-24" PE pipe DR 11
[2] Certification includes the following: ASTM D3035 IPS DR11 [1]: VE022-007 3/4" VE022-010 1" VE022-012 1¼" VE022-015 1½" VE022-020 2" VE022-030 3" [3] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [2] [G]	PE 4710	Viterra	ASTM F714
4" - 18" IPS DR 11
3" - 18" DIPS DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certification includes the following: LE011-030 3 in LE011-040 4 in LE011-060 6 in LE011-080 8 in LE011-100 10 in LE011-120 12 in LE011-180 18 in [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [2] [G]	PE 4710	Viterra	ASTM F714
3" - 18" DIPS DR 11
4" - 18" IPS DR 11
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certification includes the following: LE011-030 3 in LE011-040 4 in LE011-060 6 in LE011-080 8 in LE011-100 10 in LE011-120 12 in LE011-180 18 in [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Viterra Systems LLC
1830 Flower Ave.
Duarte, CA 91010
United States
626-716-2238

Facility : Guangdong, China

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [G]	PE 4710	Viterra	ASTM F714
4" - 65" IPS DR 11[2]
3" - 18" DIPS DR 11
[2] Certification includes the following: 4"-65" IPS DR11 PE pipe VE011-040 4" VE011-050 5" VE011-060 6" VE011-070 7" VE011-080 8" VE011-100 10" VE011-120 12" VE011-140 14" VE011-160 16" VE011-180 18" VE011-200 20" VE011-220 22" VE011-240 24" VE011-260 26" VE011-280 28" VE011-300 30" VE011-320 32" VE011-340 34" VE011-360 36" VE011-420 42" VE011-480 48" VE011-540 54" VE011-600 60" VE011-630 63" VE011-650 65" + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certification includes the following: VE011-030 3" VE011-040 4" VE011-060 6" VE011-080 8" VE011-100 10" VE011-120 12" VE011-180 18" [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [G]	PE 4710	Viterra	ASTM F714
4" - 65" IPS DR 11[2]
3" - 18" DIPS DR 11
[2] Certification includes the following: 4"-65" IPS DR11 PE pipe VE011-040 4" VE011-050 5" VE011-060 6" VE011-070 7" VE011-080 8" VE011-100 10" VE011-120 12" VE011-140 14" VE011-160 16" VE011-180 18" VE011-200 20" VE011-220 22" VE011-240 24" VE011-260 26" VE011-280 28" VE011-300 30" VE011-320 32" VE011-340 34" VE011-360 36" VE011-420 42" VE011-480 48" VE011-540 54" VE011-600 60" VE011-630 63" VE011-650 65" + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certification includes the following: VE011-030 3" VE011-040 4" VE011-060 6" VE011-080 8" VE011-100 10" VE011-120 12" VE011-180 18" [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

WL Plastics Corporation
3575 Lone Star Circle
Suite 300
Fort Worth, TX 76177
United States
682-831-2727
Visit this company's website

Facility : # 2 Lubbock, TX

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§	PE 2708	WL Plastics LBB/WLP LBB	ASTM D2513
1/2" CTS 0.090 WALL
3/4" CTS 0.090 WALL
1" CTS 0.090 WALL, 0.099 WALL, 0.101 WALL
1-1/4" CTS 0.062 WALL, 0.090 WALL, 0.121 WALL SDR 9.3
1/2" IPS SDR 9, 9.3, 9.33, 11
3/4" IPS SDR 11
1" IPS SDR 10, 11
1-1/4" IPS SDR 10, 11
1-1/2" IPS SDR 11
2" IPS SDR 11, 11.5, 13.5
3" IPS SDR 9, 11, 11.5, 13.5
4" IPS SDR 9, 11, 11.5, 13.5, 17
6" IPS SDR 9, 11, 11.5, 13.5, 17
8" IPS SDR 9, 11, 11.5, 13.5, 17
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe§	PE 4710	WL Plastics LBB/WLP LBB	ASTM D2513
1/2" CTS 0.090 WALL
3/4" CTS 0.090 WALL
1" CTS 0.090 WALL, 0.099 WALL, 0.101 WALL, 0.121 W
1-1/4" CTS 0.090 WALL, 0.121 WALL
3/4" IPS SDR 7.3, 9, 11
1" IPS SDR 7, 7.3, 9, 11
1-1/4" IPS SDR 7, 7.3, 9, 10, 11
1-1/2" IPS SDR 7, 7.3, 9, 11
2" IPS SDR 7, 7.3, 9, 11, 13.5, 15.5, 17
3" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17
4" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17
6" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17
8" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17
10" IPS SDR 7, 9, 11, 13.5, 15.5, 17
12" IPS SDR 7, 9, 11, 13.5, 15.5, 17
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Facility : Elizabethtown, KY

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	WL Plastics KY / WLP KY	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [G]	PE 4710	WL Plastics KY / WLP KY	AWWA C901
3/4" - 3" IPS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 4710	WL Plastics KY / WLP KY	AWWA C906
4" - 26" IPS DR 7
4" - 28" IPS DR 7.3[2]
4" - 36" IPS DR 9[2]
4" - 42 IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26[2]
4" - 54" IPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	WL Plastics KY / WLP KY	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
4" - 36" IPS DR 9
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26
4" - 54" IPS DR 32.5
4" - 54" IPS DR 41
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Titusville, PA

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§	PE 2708	WL Plastics PA/WLP PA	ASTM D2513
1/2" CTS 0.090 WALL
3/4" CTS 0.090 WALL
1” CTS 0.090 WALL, 0.099 WALL, 0.101 WALL
1-1/4” CTS 0.062 WALL, 0.090 WALL, 0.121 WALL SDR 9.3
1/2" IPS SDR 9, 9.3, 9.33, 11 SDR 11
3/4" IPS SDR 11 SDR 11
1” IPS SDR 11 SDR 10, 11
1-1/4” IPS SDR 10, 11 SDR 11
1-1/2" IPS SDR 11 SDR 11
2” IPS SDR 11, 13.5 SDR 11, 11.5
3” IPS SDR 9, 11, 11.5, 13.5 SDR 11, 11.5, 13.5
4” IPS SDR 9, 11, 11.5, 13.5, 17 SDR 11, 11.5, 13.5
6” IPS SDR 9, 11, 11.5, 13.5, 17 SDR 11, 11.5, 13.5
8” IPS SDR 9, 11, 11.5, 13.5, 17 SDR 11, 11.5, 13.5
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe§	PE 4710	WL Plastics PA/WLP PA	ASTM D2513
1/2" CTS 0.090 WALL
3/4" CTS 0.090 WALL
1” CTS 0.090 WALL, 0.099 WALL, 0.101 WALL, 0.121 WALL
1-1/4” CTS 0.090 WALL, 0.121 WALL
3/4" IPS SDR 7.3, 9, 11 SDR 7.3, 9, 11
1” IPS SDR 7, 7.3, 9, 11 SDR 7.3, 9, 11
1-1/4” IPS SDR 7, 7.3, 9, 10, 11 SDR 7.3, 9, 11
1-1/2" IPS SDR 7, 7.3, 9, 11 SDR 7.3, 9, 11
2” IPS SDR 7, 7.3, 9, 11, 13.5, 15.5, 17 SDR 7.3, 9, 11, 13.5, 15.5, 17
3” IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 SDR 7.3, 9, 11, 13.5, 15.5, 17
4” IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 SDR 7.3, 9, 11, 13.5, 15.5, 17
6” IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 SDR 9, 11, 13.5, 15.5, 17
8” IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17 SDR 11, 13.5, 15.5, 17
10” IPS SDR 7, 9, 11, 13,5, 15.5, 17 SDR 13.5, 15.5, 17
12” IPS SDR 7, 9, 11, 13.5, 15.5, 17 SDR 15.5, 17
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe¢	PE 2708	WL Plastics PA/WLP PA	CSA B137.4
1/2" CTS .090 wall
1" CTS .099 wall
1 1/4" SDR 10
3/4" - 2" SDR 11
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	WL Plastics PA/WLP PA	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 3" SIDR 11.5[1]
3/4" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
4" - 36" IPS DR 9
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26
4" - 54" IPS DR 32.5
4" - 54" IPS DR 41
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA	AWWA C901
3/4" - 3" IPS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 3608/4710	WL Plastics PA/WLP PA Blue	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 3" SIDR 11.5[1]
3/4" - 3" SIDR 15[1]
1/2" - 2" SIDR 19[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA Blue	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA Blue	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA Blue	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
4" - 36" IPS DR 9
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26
4" - 54" IPS DR 32.5
4" - 54" IPS DR 41
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA Blue	AWWA C901
3/4" - 3" IPS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe +*	PE 4710	WL Plastics PA/WLP PA	AWWA C906
4" - 24" IPS DR 7
4" - 24" IPS DR 7.3[2]
4" - 24" IPS DR 9
4" - 24" IPS DR 11
4" - 24" IPS DR 13.5
4" - 24" IPS DR 15.5[2]
4" - 24" IPS DR 17
4" - 24" IPS DR 21
4" - 24" IPS DR 26[2]
4" - 24" IPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * Product tested and Certified for Cold 23°C (73°F) applications only. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Facility : Rapid City, SD

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	WL Plastics SD / WLP SD	AWWA C901
3/4" - 3" IPS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 4710	WL Plastics SD / WLP SD	AWWA C906
4" - 26" IPS DR 7
4" - 28" IPS DR 7.3[2]
4" - 36" IPS DR 9[2]
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26[2]
4" - 54" IPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	WL Plastics SD / WLP SD	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	WL Plastics SD / WLP SD	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
4" - 36" IPS DR 9
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26
4" - 54" IPS DR 32.5
4" - 54" IPS DR 41
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Cedar City, UT

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	WL Plastics UT / WLP UT	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
1" - 3" DR 21[1]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	WL Plastics UT / WLP UT	AWWA C901
3/4" - 3" IPS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PE 4710	WL Plastics UT / WLP UT	AWWA C906
4" - 26" IPS DR 7
4" - 28" IPS DR 7.3[2]
4" - 36" IPS DR 9[2]
4" - 42 IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26[2]
4" - 54" IPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	WL Plastics UT / WLP UT	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
4" - 36" IPS DR 9
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26
4" - 54" IPS DR 32.5
4" - 54" IPS DR 41
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems

Baystar - Bayport Polymers LLC
12212 Port Road
Pasadena, TX 77507
United States
281-474-6000
Visit this company's website

Facility : Pasadena, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710	HDPE 4920N/BLK	ASTM D3350 445574C
Material	PE 4710	HDPE 4920B	ASTM D3350 445574C

Centennial Plastics, Inc.
1830 Centennial Avenue
P.O. Box 329
Hastings, NE 68901
United States
866-851-2227
402-462-2227
Visit this company's website

Facility : Nampa, ID

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe%	PE 3608/4710	CenFuse	ASTM D3035
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3" SDR 13.5
3" SDR 15.5
3" SDR 17
% Certified product may include a U-bend fitting.
Pipe%	PE 3608/4710	CenFuse	AWWA C901
3/4" - 2" SDR 9
% Certified product may include a U-bend fitting.
Pipe%	PE 3608/4710	CenFuse	ASTM F714
4" - 6" SDR 7
4" - 6" SDR 9
4" - 6" SDR 11
4" - 6" SDR 13.5
4" - 6" SDR 15.5[1]
4" - 6" SDR 17
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. % Certified product may include a U-bend fitting.
Pipe%	PE 4710	CenFuse	ASTM F714
4" - 6" SDR 7
4" - 6" SDR 9
4" - 6" SDR 11
4" - 6" SDR 13.5
4" - 6" SDR 15.5[1]
4" - 6" SDR 17
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. % Certified product may include a U-bend fitting.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      Documentation shipped with the product are Certified.

Facility : Hastings, NE

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe%	PE 3608/4710	CenFuse	ASTM D3035
3/4" - 3" SDR 7
3/4" - 3" SDR 9
3/4" - 3" SDR 11
3" SDR 13.5
3" SDR 15.5
3" SDR 17
% Certified product may include a U-bend fitting.
Pipe%	PE 3608/4710	CenFuse	AWWA C901
3/4" - 2" SDR 9
% Certified product may include a U-bend fitting.
Pipe%	PE 3608/4710	CenFuse	ASTM F714
4" - 6" SDR 7
4" - 6" SDR 9
4" - 6" SDR 11
4" - 6" SDR 13.5
4" - 6" SDR 15.5[1]
4" - 6" SDR 17
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. % Certified product may include a U-bend fitting.
Pipe%	PE 4710	CenFuse	ASTM F714
4" - 6" SDR 7
4" - 6" SDR 9
4" - 6" SDR 11
4" - 6" SDR 13.5
4" - 6" SDR 15.5[1]
4" - 6" SDR 17
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. % Certified product may include a U-bend fitting.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Chevron Phillips Chemical Company, LP
9500 Lakeside Blvd.
The Woodlands, TX 77381
United States
832-813-4100
Visit this company's website

Facility : Sweeny, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type		Material Type		Trade Name		Product Standard
Material		PE 4710		Marlex® TRB-432 BK		ASTM D3350 445574C

Dow Chemical Company (The)
Regulatory Compliance
1803 Building
Midland, MI 48674
United States
979-238-5209
Visit this company's website

Facility : Hahnville, LA

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710	Continuum™ DGDA-2490 Black	ASTM D3350 445574C
Material	PE 4710	Continuum™ DGDA-2490 BL	ASTM D3350 445574E
Material	PE 4710	Continuum™ DGDC-2480 Black	ASTM D3350 445574C

Facility : North Seadrift, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type		Material Type		Trade Name		Product Standard
Material		PE 3608		CONTINUUM™ DGDB-2480 Black		ASTM D3350 345464C

Equistar Chemicals, LP, a wholly-owned subsidiary of LyondellBasell
Polymers Division
1221 McKinney Street, Suite 1600
P.O. Box 2583
Houston, TX 77252-2583
United States
713-652-7200
Visit this company's website

Facility : Bay City, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type		Material Type		Trade Name		Product Standard
Material		PE 4710		Alathon® L4904 Black		ASTM D3350 445574C

Facility : La Porte, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710	Hyperzone HY4008LSC Black	ASTM D3350 445574C
Material	PE 4710 PLUS	Hyperzone HY4008 Black	ASTM D3350 445584C

Flying W Plastics Inc.
487 Vanhorn Drive
P.O. Box 759
Glenville, WV 26351
United States
304-462-5779
Visit this company's website

Facility : Glenville, WV

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe%	PE 4710	EARTH SOURCE GEOTHERMAL	ASTM D3035
3/4" - 2" DR 7
3/4" - 3" DR 9
3/4" - 3" DR 11
3" DR 13.5
3" DR 15.5
3" DR 17
% Certified product may include a U-Bend fitting.
Pipe%	PE 4710	EARTH SOURCE GEOTHERMAL	ASTM F714
4" - 20" DR 9
4" - 20" DR 11
4" - 20" DR 13.5
4" - 20" DR 15.5[1]
4" - 20" DR 17
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. % Certified product may include a U-Bend fitting.

Formosa Plastics Corporation, Texas
201 Formosa Drive
P.O. Box 700
Point Comfort, TX 77978
United States
361-987-7960

Facility : Point Comfort, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710	E6210A-MD53542	ASTM D3350 445576C
Material	PE 4710	E6210A-PO2107	ASTM D3350 445576C
Material	PE 4710	E6210A BL	ASTM D3350 445576C
Material	PE 4710	E6210C BLK	ASTM D3350 445574C
Material	PE 4710	E6210C BLK2	ASTM D3350 445574C
Material	PE 4710	E6210F2 BLK	ASTM D3350 445574C
Material	PE 4710	E6210F2 BLK2	ASTM D3350 445574C

Ineos Olefins and Polymers USA, a Division of Ineos USA LLC.
Marina View Building
2600 South Shore Boulevard
Suite 500
League City, TX 77573
United States
800-338-0489
713-307-3760
Visit this company's website

Facility : La Porte, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710	Tub 121	ASTM D3350 445574C
Material	PE 3608	K44-15-123	ASTM D3350 345464C

IPEX USA LLC
3 Place Du Commerce, Suite 101
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Asheville, NC

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe%	PE 4710	Geo-Stripe	ASTM D3035
1/2" - 2" DR 9
1/2" - 4" DR 11
% Certified product may include a fused U-Bend Fitting.

Numex Plastics, Inc.
3505 S. Main Street
P.O. Box 1697
Roswell, NM 88202-1697
United States
575-622-2070

Facility : Roswell, NM

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 4710	NUMEX Geothermal	ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 3" SIDR 11.5
1/2" - 3" SIDR 15
1/2" - 3" SIDR 19
Pipe	PE 4710	NUMEX Geothermal	ASTM D3035
1/2" - 3" DR 5
1/2" - 3" DR 6
1/2" - 3" DR 7
1/2" - 3" DR 9
1/2" - 3" DR 11
1/2" - 3" DR 13.5
1/2" - 3" DR 15.5
1/2" - 3" DR 17
1/2" - 3" DR 21
2 1/2" DR 5
2 1/2" DR 6
2 1/2" DR 7
2 1/2" DR 9
2 1/2" DR 11
2 1/2" DR 13.5
2 1/2" DR 15.5
2 1/2" DR 17
2 1/2" DR 21
Tubing	PE 4710	NUMEX Geothermal	ASTM D2737
1/2" - 2" SDR 9

Poly Technology (Polytech)
(A Granse Company)
Airlake Industrial Park
21670 Hamburg Avenue
Lakeville, MN 55044
United States
612-469-2198

Facility : Lakeville, MN

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe% [1]	PE 3608/4710	PolyTech	ASTM D3035
1/2" DR 7[2]
1/2" DR 9[2]
1/2" - 3" DR 11[2]
3/4" - 3" DR 7
3/4" - 3" DR 9
[2] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. % Certified product does not include a U-Bend Fitting. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, WSLP Fusion or Excel Fusion.
Pipe% [1]	PE 3608/4710	PolyTech	AWWA C901
3/4" - 2" SDR 9
3/4" - 2" SDR 9
% Certified product does not include a U-Bend Fitting. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, WSLP Fusion or Excel Fusion.

NOTE: Only products bearing the NSF Mark on the product,product packaging, and/or
      documentation shipped with the product are Certified.

Versaprofiles Product Inc.
154 Principale Street
Saint-Lazare de Bellechasse, QC G0R 3J0
Canada
877-335-7473
418-883-2036

Facility : Saint-Lazare de Bellechasse, Québec, Canada

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing@ ^	PE 4710	Versapipe HD100GEO	ASTM D3035
1/2'' - 3" DR 7[1]
1/2'' - 3'' DR 9[1]
1/2'' - 3" DR 9.3[1] [2]
1/2'' - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3" DR 15.5
3" DR 17
[1] Certified product may include a fused u-bend fitting. [1] Certified product may include a fused u-bend fitting. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of then end user to ensure the product is suitable for the intended application. @ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. ^ Certified product may include a U-bend fitting.
Tubing@ ^	PE 4710	Versapipe HD100GEO	ASTM F714
4" - 10'' IPS DR 7
4" - 10'' IPS DR 9
4" - 10'' IPS DR 9.3[2]
4" - 10'' IPS DR 11
4'' - 10'' IPS DR 13.5
4'' - 10'' IPS DR 15.5[2]
4'' - 10'' IPS DR 17
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of then end user to ensure the product is suitable for the intended application. @ Product is Certified to the Uniform Mechanical Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Mechanical Code™. ^ Certified product may include a U-bend fitting.

WL Plastics Corporation
3575 Lone Star Circle
Suite 300
Fort Worth, TX 76177
United States
682-831-2727
Visit this company's website

Facility : Titusville, PA

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe @*	PE 4710	WL Plastics PA/WLP PA Geothermal Pipe	ASTM D3035
1/2" DR 7[1]
3/4" - 3" DR 7
1/2" DR 9[1]
3/4" - 3" DR 9
1/2" - 3" DR 11[1]
1/2" - 3" DR 13.5[1]
3/4" - 3" DR 15.5[1]
3/4" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1 1/2" - 3" DR 32.5[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. * These products also meet the requirements for PE 3408 per ASTM D3350-02a. @ Certified product may include a fused U-bend fitting.
Pipe @*	PE 4710	WL Plastics PA/WLP PA Geothermal Pipe	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
4" - 36" IPS DR 9
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
4" - 54" IPS DR 15.5[2]
4" - 54" IPS DR 17
4" - 54" IPS DR 21
4" - 54" IPS DR 26
4" - 54" IPS DR 32.5
4" - 54" IPS DR 41
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * These products also meet the requirements for PE 3408 per ASTM D3350-02a. @ Certified product may include a fused U-bend fitting.

NSF P374
Air Duct Thermal Efficiency

AQC Industries, LLC
2920 Centre Pointe Drive
Roseville, MN 55113
United States
877-783-1520
651-209-0050

Facility : Minneapolis, MN

Trade Designation	Size	Water Contact Material
Air Duct
BLUE:10-2511 End Cap	10"	PE
BLUE:10-2515 Inline Boot (4 x 12)	10"	PE
BLUE:10-2520 Tee	10"	PE
BLUE:10-2530 90/45 Degree Elbow	10"	PE
BLUE:10-2531 22.5 Degree Elbow	10"	PE
BLUE:10-2532 15 Degree Elbow	10"	PE
BLUE:10-2533 11.25 Degree Elbow	10"	PE
BLUE:10-2540 Round Reducer	10" x 8"	PE
BLUE:10-2545 Round Reducer	10" x 8" x 6"	PE
BLUE:10-2550 Offset Saddle	10"	PE
BLUE:10-2560 Plenum Adapter with Screws	10"	PE
BLUE:10-2570 Center Saddle	10"	PE
BLUE:12-2510 Pipe	12" x 8 ft.	PE
BLUE:12-2511 End Cap	12"	PE
BLUE:12-2520 Tee	12"	PE
BLUE:12-2530 90/45 Degree Elbow	12"	PE
BLUE:12-2531 22.5 Degree Elbow	12"	PE
BLUE:12-2532 15 Degree Elbow	12"	PE
BLUE:12-2533 11.25 Degree Elbow	12"	PE
BLUE:12-2540 Reducer	12" x 10"	PE
BLUE:12-2547 Reducer	12" x 10" x 8" x 6"	PE
BLUE:12-2550 Offset Saddle	12"	PE
BLUE:12-2551 Offset Saddle	12"	PE
BLUE:12-2560 Plenum Adapter with Screws	12"	PE
BLUE:12-2577 Saddle Reducer	12" x 10"	PE
BLUE:14-2510 Pipe	14" x 8 ft.	PE
BLUE:14-2511 End Cap	14"	PE
BLUE:14-2530 90/45 Degree Elbow	14"	PE
BLUE:14-2531 22.5 Degree Elbow	14"	PE
BLUE:14-2532 15 Degree Elbow	14"	PE
BLUE:14-2533 11.25 Degree Elbow	14"	PE
BLUE:14-2560 Plenum Adapter with Screws	14"	PE
BLUE:14-2571 Saddle Reducer	14" x 12"	PE
BLUE:14-2575 Wye	14"	PE
BLUE:14-2577 Saddle Reducer	14" x 12"	PE
BLUE:16-2510 Pipe	16" x 8 ft.	PE
BLUE:16-2511 End Cap	16"	PE
BLUE:16-2530 90/45 Degree Elbow	16"	PE
BLUE:16-2531 22.5 Degree Elbow	16"	PE
BLUE:16-2532 15 Degree Elbow	16"	PE
BLUE:16-2533 11.25 Degree Elbow	16"	PE
BLUE:16-2540 Reducer	16" x 14"	PE
BLUE:16-2547 Reducer	16" x 14" x 12" x10"	PE
BLUE:16-2560 Plenum Adapter with Screws	16"	PE
BLUE:16-2571 Saddle Reducer	16" x 14"	PE
BLUE:16-2575 Wye	16"	PE
BLUE:16-2577 Saddle Reducer	16" x 14"	PE
BLUE:16-3510F Pipe with Flange	16" x 8 ft.	PE
BLUE:18-2510 Pipe	18" x 8 ft.	PE
BLUE:18-2511 End Cap	18"	PE
BLUE:18-2530 90/45 Degree Elbow	18"	PE
BLUE:18-2531 22.5 Degree Elbow	18"	PE
BLUE:18-2532 15 Degree Elbow	18"	PE
BLUE:18-2533 11.25 Degree Elbow	18"	PE
BLUE:18-2540 Eccentric Reducer	18 x 16 x 14 x 12"	PE
BLUE:18-2560 Plenum Adapter with Screws	18"	PE
BLUE:18-2571 Saddle Reducer	18" x 16"	PE
BLUE:18-2577 Saddle Reducer - Round	18" x 16"	PE
BLUE:18-3510F Pipe with Flange	18" x 8 ft.	PE
BLUE:20-0010 Plenum Adapter	20" x 24" x 36"	PE
BLUE:20-0015 Plenum Adapter	25" x 30" x 48"	PE
BLUE:20-0050 Boot Extension	4" x 12" - 16"	PE
BLUE:20-0058 Linear Diffuser Adapter (LDA)	30" x 34" x 4"	PE
BLUE:20-0059 90Deg Universal Reducer Adapter	10" x 8"	PE
BLUE:20-0060 Linear Diffuser Adapter (LDA)	23" x 20" x 6"	PE
BLUE:20-0061 Linear Diffuser	48"	PE
BLUE:20-0062 Linear Diffuser	36"	PE
BLUE:20-0063 Linear Diffuser	24"	PE
BLUE:20-0064 - linear diffuser box	49" x 9" x 11"	PE
BLUE:20-0065 - linear diffuser box	49" x 11" x 9"	PE
BLUE:20-0414 Linear Diffuser Box	15" x 7" x 5"	PE
BLUE:20-0416 Linear Diffuser Box	17" x 7" x 5"	PE
BLUE:20-0418 Linear Diffuser Box	19" x 7" x 5"	PE
BLUE:20-0424 Linear Diffuser Box	25" x 5" x 7"	PE
BLUE:20-0614 Linear Diffuser Box	15" x 7" x 9"	PE
BLUE:20-0616 Linear Diffuser Box	17" x 7" x 9"	PE
BLUE:20-0618 Linear Diffuser Box	19" x 7" x 9"	PE
BLUE:20-3510F Pipe with Flange	20" x 8 ft.	PE
BLUE:20-3530F 90/45 Degree Elbow with Flange	20"	PE
BLUE:20-3531F 22.5 Degree Elbow	20"	PE
BLUE:20-3532F 15 Degree Elbow	20"	PE
BLUE:20-3533F 11.25 Degree Elbow	20"	PE
BLUE:20-3541F Eccentric Reducer with Flange	20" x 18"	PE
BLUE:20-3542F Eccentric Reducer with Flange	20" x 18" x 16"	PE
BLUE:20-3575F Tee/Wye	20"	PE
BLUE:24-3510F Pipe with Flange	24" x 8 ft.	PE
BLUE:24-3530F 90/45 Degree Elbow with Flange	24"	PE
BLUE:24-3531F 22.5 Degree Elbow	24"	PE
BLUE:24-3532F 15 Degree Elbow	24"	PE
BLUE:24-3533F 11.25 Degree Elbow	24"	PE
BLUE:24-3541F Eccentric Reducer with Flange	24" x 20"	PE
BLUE:24-3542F Eccentric Reducer with Flange	24" x 20" x 18"	PE
BLUE:24-3543F Eccentric Reducer with Flange	24" x 20" x 18" x16"	PE
BLUE:24-3575F Tee/Wye	24"	PE
BLUE:30-3510F Pipe with Flange	30" x 8 ft.	PE
BLUE:30-3530F 90/45 Degree Elbow with Flange	30"	PE
BLUE:30-3531F 22.5 Degree Elbow	30"	PE
BLUE:30-3532F 15 Degree Elbow	30"	PE
BLUE:30-3533F 11.25 Degree Elbow	30"	PE
BLUE:30-3542F Eccentric Reducer with Flange	30" x 24"	PE
BLUE:30-3575F Tee/Wye	30"	PE
BLUE:36-3510F Pipe with Flange	36" x 8 ft.	PE
BLUE:36-3530F 90/45 Degree Elbow with Flange	36"	PE
BLUE:36-3531F 22.5 Degree Elbow	36"	PE
BLUE:36-3532F 15 Degree Elbow	36"	PE
BLUE:36-3533F 11.25 Degree Elbow	36"	PE
BLUE:36-3543F Eccentric Reducer with Flange	36" x 30" x 24"	PE
BLUE:36-3575F Tee/Wye	36"	PE
BLUE:48-3510F Pipe with Flange	48" x 8 ft.	PE
BLUE:48-3530F 90/45 Degree Elbow with Flange	48"	PE
BLUE:48-3531F 22.5 Degree Elbow	48"	PE
BLUE:48-3532F 15 Degree Elbow	48"	PE
BLUE:48-3533F 11.25 Degree Elbow	48"	PE
BLUE:48-3575F Tee/Wye	48"	PE
Blue 10-2510 Pipe	10" x 8 ft.	PE
CLAMPS:10-0080 Clamps & Gasket Set	10"	PE
CLAMPS:12-0081 Clamps & Gasket Set	12"	PE
CLAMPS:14-0081 Clamps & Gasket Set	14"	PE
CLAMPS:16-0081 Clamps & Gasket Set	16"	PE
CLAMPS:16-0100 Stainless Steel Clamp	16"	PE
CLAMPS:16-0912 Wide W6403 Gasket	16"	PE
CLAMPS:18-0081 Clamps & Gasket Set	18"	PE
CLAMPS:18-0100 Stainless Steel Clamp	18"	PE
CLAMPS:18-0912 Wide W6403 Gasket	18"	PE
CLAMPS:20-0081 Clamps & Gasket Set	20"	PE
CLAMPS:24-0081 Clamps & Gasket Set	24"	PE
CLAMPS:30-0081 Clamps & Gasket Set	30"	PE
CLAMPS:36-0081 Clamps & Gasket Set	36"	PE
CLAMPS:48-0081 Clamps & Gasket Set	48"	PE
[1] Underground Air Duct Systems 10 inches in diameter and greater are Certified to NSF Protocol P374. For Listed duct components which transition to smaller diameter duct sizes, the air duct thermal efficiency of the system following the transition to smaller size has not been determined. [2] 4" x 12" boot with screws. [3] 4" x 24" boot with screws. [4] With 12" piece and end cap.

Number of matching Manufacturers is 66
Number of matching Products is 5563
Processing time was 3 seconds

Product Type

Material Type

Trade Name

Product Standard

PE 3608/4710

Weholite

ASTM F894

18" - 120" RSC 100

18" - 132" RSC 160

18" - 132" RSC 250

18" - 132" RSC 400