+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    ABRO Purple Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings assembled using the cement without a primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    AGM Primer Clear.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1]  The compliance of this product with the health effect requirements of NSF/ANSI Standard
     61 has been determined based on the testing of pipe and fittings assembled using the
    cement and the P-1030 or P-1050 primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    an NSF® Certified Arrow Adhesives Company primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Resinova Chemie Ltd Weld-On P-70 Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Product is Certified whether or not it bears the U.P. Code Mark.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Banner Primer Purple.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    an NSF® Certified Arrow Adhesives Company primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Black Swan Purple/Clear primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    an NSF® Certified Arrow Adhesives Company primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Product is Certified whether or not it bears the U.P. Code Mark.
* Cements Certified to CSA B181.1 must be yellow in color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    i-Fuse Clear or Purple Primers.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    i-Fuse Clear or Purple Primers.
[4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    i-Fuse Blue primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Raven Purple/Clear primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 has been determined based on the testing of pipe and fittings assembled using the
    cement and the 2471 /2472/2473/2474/2475/2476  primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

! Product is Certified whether or not it bears the U.P. Code Mark.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    SeaCor Primer Purple Low VOC primer.
[3] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* This cement is yellow color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Mainline™ Clear Primer for PVC and CPVC or Mainline™ Purple Primer for PVC and
    CPVC.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* This cement is yellow color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Mainline Clear Primer for PVC and CPVC or Mainline Purple Primer for PVC and CPVC
    
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated			based on pipe and fittings assembled using the cement with primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 has been determined based on the testing of pipe and fittings assembled using the
    cement and the P-1030 or P-1050 primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for use with  90 Callibre Primer Clear or 90 Callibre Primer Purple. 
[2] This product is acceptable for use with pipe and fittings sized 1/2” and greater
    diameter.

! Product is Certified whether or not it bears the U.P. Code Mark.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Xirtec 7 Clear, Purple Primer or IPEX Primer Purple Low VOC primers. 
[3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld On® P-68.
[4] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assemblies using the cement and
    one of the following primers: Christy's® Clear Primer Low VOC, Christy's® Purple Primer
    Low VOC, Christy's® Red Hot Clear® Low VOC, or Christy's® Red Hot Purple Primer Low VOC.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Product is Certified whether or not it bears the U.P. Code Mark.
* Cements Certified to CSA B181.1 must be yellow in color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either the AquaRise Primer or IPEX 70 Purple/Clear Primer.
[3] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

& x indicates size of container
  04 - 1/4 pint
  08 - 1/2 pint
  16 - 1 pint
  32 - 1 quart
  01 - 1 gallon
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Certified for use with Weld-On® P-68 Clear Low-VOC Primer for PVC/CPVC, Weld-On® P-70
    Clear Low-VOC CPVC/PVC Primer, or Weld-On® P-70 Purple Low-VOC CPVC/PVC Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2” and greater
    diameter.
[3] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On P-68 or P-70 Clear or Purple primers.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI Standard
    61 is evaluated based on pipe and fittings assembled using the cement without a primer.
[2] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and any IPS Primer.
[3] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter. 
[4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings assembled using the cement with primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Product is Certified whether or not it bears the U.P. Code Mark.
* Cements Certified to CSA B181.1 must be yellow in color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld-On® P-68 Clear Low-VOC Primer for PVC/CPVC, Weld-On® P-70 Clear Low-VOC
    CPVC/PVC Primer, or Weld-On® P-70 Purple Low-VOC CPVC/PVC Primer.
[4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Weld-All™ 8151[X] Clear Primer.
[5] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings assembled using the cement without a primer.
[7] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing  of pipe and fittings assembled using the cement
    and P-75 Aqua-Blue Low VOC primer.
[8] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On P-68 or P-70 Clear or Purple primers.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Product is Certified whether or not it bears the U.P. Code Mark
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers.
[3] This product is intended for use without a primer.
[4] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assemblies using the cement and
    one of the following primers: Christy's® Clear Primer Low VOC, Christy's® Purple Primer
    Low VOC, Christy's® Red Hot Clear® Low VOC, or Christy's® Red Hot Purple Primer Low VOC.
[5] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers.
[6] The compliance of this product with the health effects requriements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings.
[7]  The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the
    cement	and  Weld-On  P-70 Clear or Purple primers.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings assembled using the cement and Whitlam Low-VOC
    Clear or Purple Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and Dottie PVC Primer Purple.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

% Only products bearing the NSF Mark are Certified.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Oatey Clear and Purple Primers.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con
    Indicador UV Mediano. Todo clima Cemento de 1 Paso para CPVC

% Only products bearing the NSF Mark are Certified.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Oatey Purple Primer.
[2] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.
[3] Product intended for use without a primer.
[4] NSF-Certified Oatey Clear or Purple primer is required.
[5] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con
    Indicador UV Mediano. Todo clima Cemento de 1 Paso para CPVC

% Only products bearing the NSF Mark are Certified.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Oatey Clear and Purple Primers.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con
    Indicador UV Mediano.  Todo clima Cemento de 1 Paso para CPVC.
[5] Product's full trade designation is:
    Ashrivad 1Step CPVC Cement FlowGuard Gold Yellow Medium Bodied All Weather CPVC Cement
[6] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    CONTACT 211 or CONTACT 212 primer.

! Product is Certified whether or not it bears the U.P. Code Mark.
* This cement is yellow color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
~ Product is authorized to bear the cNSF Mark.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined on the testing of pipe and fittings assembled using the cement and
    Parabond C-60 Clear and Purple Primers.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    RectorSeal Clear PR-2L clear primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 
    was determined based on the testing of pipe and fittings assembled using the cement and
    Rectorseal Clear or purple Primers.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    ZENITH-Clear Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

! Product is Certified whether or not it bears the U.P. Code Mark.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[2] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the
    testing of pipe and fittings assembled using the cement and Pro-Trade  Primer.
[3] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing  of pipe and fittings assembled using the cement
    and P-75 Aqua-Blue Low VOC primer.
[4] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    either Weld-On® P-68 Clear Low-VOC Primer for PVC/CPVC, Weld-On® P-70 Clear Low-VOC
    CPVC/PVC Primer, or Weld-On® P-70 Purple Low-VOC CPVC/PVC Primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F
^ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 180 ° F
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This primer may be used with any Certified Spears PVC or CPVC solvent cement.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] Spears LW-5 One Step Low VOC Mustard CPVC Cement for Lab WasteTM is Certified for
    corrosive waste applications as part of the Spears LabWaste™ CPVC Corrosive Waste
    Drainage System, consisting of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC
    Fittings, and LW-5 One Step Low VOC Mustard CPVC Cement for Lab Waste™.
[4] Spears OT-5 One step low VOC Mustard CPVC Cement for OceanTUFF™ is Certified for
    corrosive waste applications as part of the Spears OceanTUFF™ CPVC Corrosive Waste
    Drainage System, consisting of Spears OceanTUFF™ CPVC Pipe,OceanTUFF™ fittings and OT-5
    One Step Low VOC Mustard CPVC Cement for OceanTUFF™.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    an NSF® Certified Arrow Adhesives Company primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Product is Certified whether or not it bears the U.P. Code Mark.
* xx - Package size: 01, 02, 03, 04 and 05 indicate 1/4 pint, 1/2 pint, pint, quart and
  gallon respectively.
  
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.1 must be yellow in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assemblies using the cement and
    one of the following primers: Christy's® Purple Primer Low Ultra VOC, Christy's® Red Hot
    Clear® Low VOC, Christy's® Red Hot Purple Primer Low Ultra VOC, or Weld On® P-68 Clear
    or Purple, P-70® Clear or Purple.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings assembled using the cement with primer.
[4] This is a one-step solvent cement and is not intended for use with a primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 has been determined based on the testing of pipe and fittings assembled using the
    cement and the P-1030 or P-1050 primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] Certified for use with BAILEY P-1050 Clear Water Thin PVC/CPVC Plastic Pipe Cement
    Primer, ERA P-1050 Clear Water Thin PVC/CPVC Plastic Pipe Cement Primer, G-GOOD P-1050
    Clear Water Thin PVC/CPVC Plastic Pipe Cement Primer, BAILEY P-1050 Purple Water Thin
    PVC/CPVC Plastic Pipe Cement Primer, ERA P-1050 Purple Water Thin PVC/CPVC Plastic Pipe
    Cement Primer, G-GOOD P-1050 Purple Water Thin PVC/CPVC Plastic Pipe Cement Primer.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings assembled using the cement and Blue Monster
    Purple Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[4] Certified for use with SILBOND Purple Primer Cleaner.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Tigre Primer para CPVC Sch. 80 Roxo Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Matusita Tigre Primer Transparente para PVC y CPVC.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    is evaluated based on pipe and fittings assembled using the cement without a primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    an NSF® Certified Arrow Adhesives Company primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Harvey's Purple Primer.
[3] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    an NSF® Certified Arrow Adhesives Company primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Weld-All™ 8151[X] Clear Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* [X] Indicates size of container:
      04 - 1/4 pint
      08 - 1/2 pint
      16 - 1 pint
      32 - 1 quart
      01 - 1 gallon
  
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Weld-All™ 8151[X] Clear Primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 180° F.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61,
    Section 4.
[2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    Harvey's Purple Primer.
[3] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter.