NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, August 2, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?MaterialType=SS&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Cello Products Inc. | |
| 210 Avenue Rd | |
| Cambridge, ON N1R 8H5 | |
| Canada | |
| 1-800-265-7882 | |
| 519-621-9150 |
Facility : Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp¢ § [1] |
SS |
CELLO |
ASTM F1960 |
|||
| PX0XR-06 | ||||||
| PX0XR-08 | ||||||
| PX0XR-10 | ||||||
| PX0XR-12 | ||||||
| PX0XR-16 | ||||||
| PX0XR-20 | ||||||
| PX0XR-24 | ||||||
| PX0XR-32 | ||||||
| PX0XR-40 | ||||||
| PX0XR-48 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
||||||
Pinch Clamp¢ § [1] |
SS |
CELLO |
CSA B137.5 |
|||
| PX0XR-06 | ||||||
| PX0XR-08 | ||||||
| PX0XR-10 | ||||||
| PX0XR-12 | ||||||
| PX0XR-16 | ||||||
| PX0XR-20 | ||||||
| PX0XR-24 | ||||||
| PX0XR-32 | ||||||
| PX0XR-40 | ||||||
| PX0XR-48 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
||||||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
ASTM F877 |
|||
| PX0CR-S-06 | ||||||
| PX0CR-S-08 | ||||||
| PX0CR-S-10 | ||||||
| PX0CR-S-12 | ||||||
| PX0CR-S-16 | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
ASTM F2098 |
|||
| PX0CR-S-06 | ||||||
| PX0CR-S-08 | ||||||
| PX0CR-S-10 | ||||||
| PX0CR-S-12 | ||||||
| PX0CR-S-16 | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
CSA B137.5 |
|||
| PX0CR-S-06 | ||||||
| PX0CR-S-08 | ||||||
| PX0CR-S-10 | ||||||
| PX0CR-S-12 | ||||||
| PX0CR-S-16 | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp¢ § [1] |
SS |
CELLO |
ASTM F1960 |
|||
| PX0XR-06 | ||||||
| PX0XR-08 | ||||||
| PX0XR-10 | ||||||
| PX0XR-12 | ||||||
| PX0XR-16 | ||||||
| PX0XR-20 | ||||||
| PX0XR-24 | ||||||
| PX0XR-32 | ||||||
| PX0XR-40 | ||||||
| PX0XR-48 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
||||||
Pinch Clamp¢ § [1] |
SS |
CELLO |
CSA B137.5 |
|||
| PX0XR-06 | ||||||
| PX0XR-08 | ||||||
| PX0XR-10 | ||||||
| PX0XR-12 | ||||||
| PX0XR-16 | ||||||
| PX0XR-20 | ||||||
| PX0XR-24 | ||||||
| PX0XR-32 | ||||||
| PX0XR-40 | ||||||
| PX0XR-48 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is a non-wetted fitting component. |
||||||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
ASTM F877 |
|||
| PX0CR-S-06 | ||||||
| PX0CR-S-08 | ||||||
| PX0CR-S-10 | ||||||
| PX0CR-S-12 | ||||||
| PX0CR-S-16 | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
ASTM F2098 |
|||
| PX0CR-S-06 | ||||||
| PX0CR-S-08 | ||||||
| PX0CR-S-10 | ||||||
| PX0CR-S-12 | ||||||
| PX0CR-S-16 | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
CSA B137.5 |
|||
| PX0CR-S-06 | ||||||
| PX0CR-S-08 | ||||||
| PX0CR-S-10 | ||||||
| PX0CR-S-12 | ||||||
| PX0CR-S-16 | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
| Don Boom (Thailand ) Co.,Ltd | |
| 180/8 Moo 6 Bueng , Sriracha | |
| Chonburi | |
| Thailand | |
| 0066-0800233158 | |
| Visit this company's website |
Facility : Chonburi, Thailand
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings§ [1] |
SS |
dwb |
ASTM F2098 |
||||
|
Pinch Clamp |
|||||||
| 3/8" (PEX133) | 1/2" (PEX175) | 5/8" (PEX206) | 3/4" (PEX233) | ||||
| 1" (PEX296) | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
dwb |
ASTM F877 |
||||
|
Pinch Clamp |
|||||||
| 3/8" (PEX133) | 1/2" (PEX175) | 5/8" (PEX206) | 3/4" (PEX233) | ||||
| 1" (PEX296) | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings¢ § [1] |
SS |
dwb |
CSA B137.5 |
||||
|
Pinch Clamp |
|||||||
| 3/8" (PEX133) | 1/2" (PEX175) | 5/8" (PEX206) | 3/4" (PEX233) | ||||
| 1" (PEX296) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
dwb |
ASTM F2098 |
||||
|
Pinch Clamp[2] |
|||||||
| 3/8" (PEX133T) | 1/2" (PEX175T) | 5/8" (PEX206T) | 3/4" (PEX233T) | ||||
| 1" (PEX296T) | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
dwb |
ASTM F877 |
||||
|
Pinch Clamp[2] |
|||||||
| 3/8" (PEX133T) | 1/2" (PEX175T) | 5/8" (PEX206T) | 3/4" (PEX233T) | ||||
| 1" (PEX296T) | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings¢ § [1] |
SS |
dwb |
CSA B137.5 |
||||
|
Pinch Clamp[2] |
|||||||
| 3/8" (PEX133T) | 1/2" (PEX175T) | 5/8" (PEX206T) | 3/4" (PEX233T) | ||||
| 1" (PEX296T) | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings§ [1] |
SS |
dwb |
ASTM F2098 |
||||
|
Pinch Clamp |
|||||||
| 3/8" (PEX133) | 1/2" (PEX175) | 5/8" (PEX206) | 3/4" (PEX233) | ||||
| 1" (PEX296) | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
dwb |
ASTM F877 |
||||
|
Pinch Clamp |
|||||||
| 3/8" (PEX133) | 1/2" (PEX175) | 5/8" (PEX206) | 3/4" (PEX233) | ||||
| 1" (PEX296) | |||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings¢ § [1] |
SS |
dwb |
CSA B137.5 |
||||
|
Pinch Clamp |
|||||||
| 3/8" (PEX133) | 1/2" (PEX175) | 5/8" (PEX206) | 3/4" (PEX233) | ||||
| 1" (PEX296) | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
dwb |
ASTM F2098 |
||||
|
Pinch Clamp[2] |
|||||||
| 3/8" (PEX133T) | 1/2" (PEX175T) | 5/8" (PEX206T) | 3/4" (PEX233T) | ||||
| 1" (PEX296T) | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
dwb |
ASTM F877 |
||||
|
Pinch Clamp[2] |
|||||||
| 3/8" (PEX133T) | 1/2" (PEX175T) | 5/8" (PEX206T) | 3/4" (PEX233T) | ||||
| 1" (PEX296T) | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings¢ § [1] |
SS |
dwb |
CSA B137.5 |
||||
|
Pinch Clamp[2] |
|||||||
| 3/8" (PEX133T) | 1/2" (PEX175T) | 5/8" (PEX206T) | 3/4" (PEX233T) | ||||
| 1" (PEX296T) | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
| EFIELD USA INC. | |
| 16281 Gale Avenue | |
| City of Industry, CA 91789 | |
| United States | |
| 9095519262 |
Facility : Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
ASTM F2098 |
|||
| Pex Clamp 3/8" | ||||||
| Pex Clamp 1/2" | ||||||
| Pex Clamp 3/4" | ||||||
| Pex Clamp 5/8" | ||||||
| Pex Clamp 1" | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
CSA B137.5 |
|||
| Pex Clamp 3/8" | ||||||
| Pex Clamp 1/2" | ||||||
| Pex Clamp 3/4" | ||||||
| Pex Clamp 5/8" | ||||||
| Pex Clamp 1" | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[2] [3] |
SS |
SS Clamp |
ASTM F877 |
|||
| Pex Clamp 3/8" | ||||||
| Pex Clamp 1/2" | ||||||
| Pex Clamp 3/4" | ||||||
| Pex Clamp 5/8" | ||||||
| Pex Clamp 1" | ||||||
[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
ASTM F2098 |
|||
| Pex Clamp 3/8" | ||||||
| Pex Clamp 1/2" | ||||||
| Pex Clamp 3/4" | ||||||
| Pex Clamp 5/8" | ||||||
| Pex Clamp 1" | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
CSA B137.5 |
|||
| Pex Clamp 3/8" | ||||||
| Pex Clamp 1/2" | ||||||
| Pex Clamp 3/4" | ||||||
| Pex Clamp 5/8" | ||||||
| Pex Clamp 1" | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
ASTM F877 |
|||
| Pex Clamp 3/8" | ||||||
| Pex Clamp 1/2" | ||||||
| Pex Clamp 3/4" | ||||||
| Pex Clamp 5/8" | ||||||
| Pex Clamp 1" | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
| Foshan Rifeng Enterprise Co., Ltd. | |
| 5th/F, Rifeng Building | |
| 16 Zumiao Road | |
| Foshan, Guangdong 528000 | |
| China | |
| 86 757 8222 9060 |
Facility : Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp |
SS |
SS Clamp |
ASTM F2098 |
|||
| PF5-3/8 | ||||||
| PF5-1/2 | ||||||
| PF5-5/8 | ||||||
| PF5-3/4 | ||||||
| PF5-1 | ||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp |
SS |
SS Clamp |
ASTM F2098 |
|||
| PF5-3/8 | ||||||
| PF5-1/2 | ||||||
| PF5-5/8 | ||||||
| PF5-3/4 | ||||||
| PF5-1 | ||||||
| Heatlink Group INC. | |
| 11500 - Stonehill Drive NE | |
| #115 | |
| Calgary, AB T3N 2M7 | |
| Canada | |
| 403-717-3820 |
Facility : Cavriago, Italy
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
SS Press Sleeves! $ ¢ § |
SS |
HL Pex |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
HL Pex |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
PL |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
PL |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
HeatLink SS Press Sleeve |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
HeatLink SS Press Sleeve |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
PureLink SS Press Sleeve |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
PureLink SS Press Sleeve |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
SS Press Sleeves! $ ¢ § |
SS |
HL Pex |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
HL Pex |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
PL |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
PL |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
HeatLink SS Press Sleeve |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
HeatLink SS Press Sleeve |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
PureLink SS Press Sleeve |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
PureLink SS Press Sleeve |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Sleeves are Certified as a system component using Heatlink's NSF Certified ASTM F876/F877 tubing and ASTM F1807 / F2159 fittings. Product meets the requirements of CSA B137.5 when used with Heatlink's NSF Certified CSA B137.5 tubing and fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
| Legend Valve and Fittings | |
| 300 North Opdyke | |
| Auburn Hills, MI 48326 | |
| United States | |
| 800-752-2082 |
Facility : Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp |
SS |
SS Clamp |
ASTM F2098 |
|||
| 3/8" (460-912) | ||||||
| 1/2" (460-913) | ||||||
| 5/8" (460-910) | ||||||
| 3/4" (460-914) | ||||||
| 1" (460-915) | ||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp |
SS |
SS Clamp |
ASTM F2098 |
|||
| 3/8" (460-912) | ||||||
| 1/2" (460-913) | ||||||
| 5/8" (460-910) | ||||||
| 3/4" (460-914) | ||||||
| 1" (460-915) | ||||||
| Oetiker Inc. | |
| 6317 Euclid Street | |
| P.O. Box 217 | |
| Marlette, MI 48543 | |
| United States | |
| 800-963-8453 | |
| 989-635-3621 | |
| Visit this company's website |
Facility : Marlette, MI
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fitting Components* [1] |
SS |
Oetiker Stepless® PEX Clamp |
ASTM F2098 |
||||
| 3/8" (16703334) | 1/2" (16703335) | 5/8" (16705571) | 3/4" (16703336) | ||||
| 1" (16704150) | |||||||
* Fittings may be marked with metric size designation. [1] Product may also be marked with trade designation OET. |
|||||||
Fitting Components* [1] |
SS |
Oetiker Stepless® PEX Clamp |
ASTM F877 |
||||
| 3/8" (16703334) | 1/2" (16703335) | 5/8" (16705571) | 3/4" (16703336) | ||||
| 1" (16704150) | |||||||
* Fittings may be marked with metric size designation. [1] Product may also be marked with trade designation OET. |
|||||||
Fitting Components* ¢ [1] |
SS |
Oetiker Stepless® PEX Clamp |
CSA B137.5 |
||||
| 3/8" (16703334) | 1/2" (16703335) | 5/8" (16705571) | 3/4" (16703336) | ||||
| 1" (16704150) | |||||||
* Fittings may be marked with metric size designation. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product may also be marked with trade designation OET. |
|||||||
Fitting Components* @ [1] |
SS |
Oetiker Stepless® PEXGrip® Clamp |
ASTM F2098 |
||||
| 3/8" (16708503) | 1/2" (16707872) | 5/8" (16708504) | 3/4" (16707955) | ||||
| 1" (16708152) | |||||||
* Fittings may be marked with metric size designation. @ Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098 prior to presetting. As-sold dimensions are per manufacturer's specifications. [1] Product may also be marked with trade designation OET. |
|||||||
Fitting Components* [1] |
SS |
Oetiker Stepless® PEXGrip® Clamp |
ASTM F877 |
||||
| 3/8" (16708503) | 1/2" (16707872) | 5/8" (16708504) | 3/4" (16707955) | ||||
| 1" (16708152) | |||||||
* Fittings may be marked with metric size designation. [1] Product may also be marked with trade designation OET. |
|||||||
Fitting Components* ¢ [1] |
SS |
Oetiker Stepless® PEXGrip® Clamp |
CSA B137.5 |
||||
| 3/8" (16708503) | 1/2" (16707872) | 5/8" (16708504) | 3/4" (16707955) | ||||
| 1" (16708152) | |||||||
* Fittings may be marked with metric size designation. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product may also be marked with trade designation OET. |
|||||||
Fitting Components* ¢ [1] |
SS |
Oetiker Stepless® PEXGrip Pro Clamp |
ASTM F2098 |
||||
| 1/2" (26300001) | 3/4" (26300003) | 1" (26300004) | 3/8" (26300005) | ||||
| 5/8" (26300002) | |||||||
* Fittings may be marked with metric size designation. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product may also be marked with trade designation OET. |
|||||||
Fitting Components* ¢ [1] |
SS |
Oetiker Stepless® PEXGrip Pro Clamp |
ASTM F877 |
||||
| 1/2" (26300001) | 3/4" (26300003) | 1" (26300004) | 3/8" (26300005) | ||||
| 5/8" (26300002) | |||||||
* Fittings may be marked with metric size designation. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product may also be marked with trade designation OET. |
|||||||
Fitting Components* ¢ [1] |
SS |
Oetiker Stepless® PEXGrip Pro Clamp |
CSA B137.5 |
||||
| 1/2" (26300001) | 3/4" (26300003) | 1" (26300004) | 3/8" (26300005) | ||||
| 5/8" (26300002) | |||||||
* Fittings may be marked with metric size designation. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product may also be marked with trade designation OET. |
|||||||
| Reliance Worldwide / Cash Acme | |
| 2400 7th Avenue Southwest | |
| Cullman, AL 35055 | |
| United States | |
| 877-700-4242 | |
| 256-775-8186 | |
| Visit this company's website |
Facility : Marlette, MI
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings* |
SS |
SharkBite® PEX Clamp |
ASTM F2098 |
||||
| 3/8" (UC952Z, UC952A, UC952) | 1/2" (UC953Z, UC953A, UC953, UC953CP25, UC953CP25Z) | 5/8" (UC954) | 3/4" (UC955, UC955A, UC955Z, UC955CP25, UC955CP25Z) | ||||
| 1" (UC956, UC956A, and UC956Z) | |||||||
* Fittings may be marked with metric size designation. |
|||||||
Fittings* |
SS |
SharkBite® PEX Clamp |
ASTM F877 |
||||
| 3/8" (UC952Z, UC952A, UC952) | 1/2" (UC953Z, UC953A, UC953, UC953CP25, UC953CP25Z) | 5/8" (UC954) | 3/4" (UC955, UC955A, UC955Z, UC955CP25, UC955CP25Z) | ||||
| 1" (UC956, UC956A, UC956Z) | |||||||
* Fittings may be marked with metric size designation. |
|||||||
Fittings* ¢ |
SS |
SharkBite® PEX Clamp |
CSA B137.5 |
||||
| 3/8" (UC952Z, UC952A, UC952) | 1/2" (UC953Z, UC953A, UC953, UC953CP25, UC953CP25Z) | 5/8" (UC954) | 3/4" (UC955, UC955A, UC955Z, UC955CP25, UC955CP25Z) | ||||
| 1" (UC956, UC956A, UC956Z) | |||||||
* Fittings may be marked with metric size designation. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
| Safelink Systems, Inc. DBA MrPEX Systems | |
| 14799 Jackal Street NW | |
| Suite 100 | |
| Ramsey, MN 55303 | |
| United States | |
| 800-716-3406 | |
| 952-652-2472 | |
| Visit this company's website |
Facility : # 3
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
SS Press Sleeves! $ ¢ § |
SS |
MrPEX |
ASTM F877 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Product(s) are tested and Certified as an authorized component of the NSF® Certified Safelink tubing and NSF® Certified Safelink fitting system. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
SS Press Sleeves! $ ¢ § |
SS |
MrPEX |
CSA B137.5 |
|||
| 1/2" - 2" | ||||||
! Product(s) are exempt from bearing the U.P. Code Mark. $ Product(s) are tested and Certified as an authorized component of the NSF® Certified Safelink tubing and NSF® Certified Safelink fitting system. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
| The Mosack Group | |
| 11210 Allen Station Drive | |
| Mint Hill, NC 28226 | |
| United States | |
| 888-229-2874 | |
| 704-479-6584 | |
| Visit this company's website |
Facility : Chonburi, Thailand
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings§ [1] |
SS |
TMG PEX |
ASTM F2098 |
||||
|
Pinch Clamp[2] |
|||||||
| PXPC3810PK 3/8" | PXPC3825PK 3/8" | PXPC3850PK 3/8" | PXPC38100JR 3/8" | ||||
| PXPC12100JR 1/2" | CPXPC1210PK 1/2" | CPXPC1250PK 1/2" | PXPC12100PK 1/2" | ||||
| PXPC1210PK 1/2" | PXPC1225PK 1/2" | PXPRO1210PK 1/2" | PXPRO12100JR 1/2" | ||||
| 24105 - 1/2" | PXPC5810PK 5/8" | PXPC5825PK 5/8" | PXPC34100JR 3/4" | ||||
| CPXPC3410PK 3/4" | CPXPC3450PK 3/4" | PXPC34100PK 3/4" | PXPC3410PK 3/4" | ||||
| PXPC3425PK 3/4" | PXPRO3410PK 3/4" | PXPRO34100JR 3/4" | 24122 - 3/4" | ||||
| PXPC110PK 1" | PXPC15PK 1" | PXPC150JR 1" | 24128 - 1" | ||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
TMG PEX |
ASTM F877 |
||||
|
Pinch Clamp[2] |
|||||||
| PXPC3810PK 3/8" | PXPC3825PK 3/8" | PXPC3850PK 3/8" | PXPC38100JR 3/8" | ||||
| PXPC12100JR 1/2" | CPXPC1210PK 1/2" | CPXPC1250PK 1/2" | PXPC12100PK 1/2" | ||||
| PXPC1210PK 1/2" | PXPC1225PK 1/2" | PXPRO1210PK 1/2" | PXPRO12100JR 1/2" | ||||
| 24105 - 1/2" | PXPC5810PK 5/8" | PXPC5825PK 5/8" | PXPC34100JR 3/4" | ||||
| CPXPC3410PK 3/4" | CPXPC3450PK 3/4" | PXPC34100PK 3/4" | PXPC3410PK 3/4" | ||||
| PXPC3425PK 3/4" | PXPRO3410PK 3/4" | PXPRO34100JR 3/4" | 24122 - 3/4" | ||||
| PXPC110PK 1" | PXPC15PK 1" | PXPC150JR 1" | 24128 - 1" | ||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
TMG PEX |
CSA B137.5 |
||||
|
Pinch Clamp[2] |
|||||||
| PXPC3810PK 3/8" | PXPC3825PK 3/8" | PXPC3850PK 3/8" | PXPC38100JR 3/8" | ||||
| PXPC12100JR 1/2" | CPXPC1210PK 1/2" | CPXPC1250PK 1/2" | PXPC12100PK 1/2" | ||||
| PXPC1210PK 1/2" | PXPC1225PK 1/2" | PXPRO1210PK 1/2" | PXPRO12100JR 1/2" | ||||
| 24105 - 1/2" | PXPC5810PK 5/8" | PXPC5825PK 5/8" | PXPC34100JR 3/4" | ||||
| CPXPC3410PK 3/4" | CPXPC3450PK 3/4" | PXPC34100PK 3/4" | PXPC3410PK 3/4" | ||||
| PXPC3425PK 3/4" | PXPRO3410PK 3/4" | PXPRO34100JR 3/4" | 24122 - 3/4" | ||||
| PXPC110PK 1" | PXPC15PK 1" | PXPC150JR 1" | 24128 - 1" | ||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings§ [1] |
SS |
TMG PEX |
ASTM F2098 |
||||
|
Pinch Clamp[2] |
|||||||
| PXPC3810PK 3/8" | PXPC3825PK 3/8" | PXPC3850PK 3/8" | PXPC38100JR 3/8" | ||||
| PXPC12100JR 1/2" | CPXPC1210PK 1/2" | CPXPC1250PK 1/2" | PXPC12100PK 1/2" | ||||
| PXPC1210PK 1/2" | PXPC1225PK 1/2" | PXPRO1210PK 1/2" | PXPRO12100JR 1/2" | ||||
| 24105 - 1/2" | PXPC5810PK 5/8" | PXPC5825PK 5/8" | PXPC34100JR 3/4" | ||||
| CPXPC3410PK 3/4" | CPXPC3450PK 3/4" | PXPC34100PK 3/4" | PXPC3410PK 3/4" | ||||
| PXPC3425PK 3/4" | PXPRO3410PK 3/4" | PXPRO34100JR 3/4" | 24122 - 3/4" | ||||
| PXPC110PK 1" | PXPC15PK 1" | PXPC150JR 1" | 24128 - 1" | ||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
TMG PEX |
ASTM F877 |
||||
|
Pinch Clamp[2] |
|||||||
| PXPC3810PK 3/8" | PXPC3825PK 3/8" | PXPC3850PK 3/8" | PXPC38100JR 3/8" | ||||
| PXPC12100JR 1/2" | CPXPC1210PK 1/2" | CPXPC1250PK 1/2" | PXPC12100PK 1/2" | ||||
| PXPC1210PK 1/2" | PXPC1225PK 1/2" | PXPRO1210PK 1/2" | PXPRO12100JR 1/2" | ||||
| 24105 - 1/2" | PXPC5810PK 5/8" | PXPC5825PK 5/8" | PXPC34100JR 3/4" | ||||
| CPXPC3410PK 3/4" | CPXPC3450PK 3/4" | PXPC34100PK 3/4" | PXPC3410PK 3/4" | ||||
| PXPC3425PK 3/4" | PXPRO3410PK 3/4" | PXPRO34100JR 3/4" | 24122 - 3/4" | ||||
| PXPC110PK 1" | PXPC15PK 1" | PXPC150JR 1" | 24128 - 1" | ||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
TMG PEX |
CSA B137.5 |
||||
|
Pinch Clamp[2] |
|||||||
| PXPC3810PK 3/8" | PXPC3825PK 3/8" | PXPC3850PK 3/8" | PXPC38100JR 3/8" | ||||
| PXPC12100JR 1/2" | CPXPC1210PK 1/2" | CPXPC1250PK 1/2" | PXPC12100PK 1/2" | ||||
| PXPC1210PK 1/2" | PXPC1225PK 1/2" | PXPRO1210PK 1/2" | PXPRO12100JR 1/2" | ||||
| 24105 - 1/2" | PXPC5810PK 5/8" | PXPC5825PK 5/8" | PXPC34100JR 3/4" | ||||
| CPXPC3410PK 3/4" | CPXPC3450PK 3/4" | PXPC34100PK 3/4" | PXPC3410PK 3/4" | ||||
| PXPC3425PK 3/4" | PXPRO3410PK 3/4" | PXPRO34100JR 3/4" | 24122 - 3/4" | ||||
| PXPC110PK 1" | PXPC15PK 1" | PXPC150JR 1" | 24128 - 1" | ||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
| Uponor |  |
| 5925 148th Street West | |
| Apple Valley, MN 55124 | |
| United States | |
| 800-321-4739 | |
| 952-891-2000 | |
| Visit this company's website |
Facility : Hartsville, SC
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Fittings¢ § +++ |
SS |
Uponor Logo |
ASTM F1960 |
|||
|
Male Threaded Adapter (PEX x NPT) |
||||||
| 1/2" x 1/2" (Q8525050) | 3/4" x 3/4" (Q8527575) | 1" x 1" (Q8521010) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
Fittings¢ § +++ |
SS |
Uponor Logo |
CSA B137.5 |
|||
|
Male Threaded Adapter (PEX x NPT) |
||||||
| 1/2" x 1/2" (Q8525050) | 3/4" x 3/4" (Q8527575) | 1" x 1" (Q8521010) | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
|
||||||
| Waterline Products Co. Ltd | |
| 100 Westcreek Boulevard | |
| Unit # 2 | |
| Brampton, ON L6T 5V7 | |
| Canada | |
| 1-800-361-3773 | |
| 905-625-9440 | |
| Visit this company's website |
Facility : Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp |
SS |
Waterline |
ASTM F2098 |
|||
| 1410088: 1/2" SS.PEX Pinch Clamp Bulk( 50 pcs/Bag) | ||||||
| 1440088: 1/2" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 5096088: 1/2" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 1425077: 1/2" SS PEX Pinch Clamp Handi PAC (50pcs) | ||||||
| 1410099: 3/4" SS.PEX Pinch Clamp Bulk( 50 pcs/Bag) | ||||||
| 1440099: 3/4" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 5096097: 3/4" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 1425099: 3/4" SS PEX Pinch Clamp Handi PAC (50pcs) | ||||||
| 1410010: 1" SS.PEX Pinch Clamp Bulk | ||||||
| 1410077: 3/8" SS PEX Pinch Clamps | ||||||
| 1410079: 5/8" SS PEX Pinch Clamps | ||||||
Pinch Clamp |
SS |
Waterline |
CSA B137.5 |
|||
| 1410088: 1/2" SS.PEX Pinch Clamp Bulk( 50 pcs/Bag) | ||||||
| 1440088: 1/2" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 5096088: 1/2" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 1425077: 1/2" SS PEX Pinch Clamp Handi PAC (50pcs) | ||||||
| 1410099: 3/4" SS.PEX Pinch Clamp Bulk( 50 pcs/Bag) | ||||||
| 1440099: 3/4" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 5096097: 3/4" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 1425099: 3/4" SS PEX Pinch Clamp Handi PAC (50pcs) | ||||||
| 1410010: 1" SS.PEX Pinch Clamp Bulk | ||||||
| 1410077: 3/8" SS PEX Pinch Clamps | ||||||
| 1410079: 5/8" SS PEX Pinch Clamps | ||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp |
SS |
Waterline |
ASTM F2098 |
|||
| 1410088: 1/2" SS.PEX Pinch Clamp Bulk( 50 pcs/Bag) | ||||||
| 1440088: 1/2" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 5096088: 1/2" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 1425077: 1/2" SS PEX Pinch Clamp Handi PAC (50pcs) | ||||||
| 1410099: 3/4" SS.PEX Pinch Clamp Bulk( 50 pcs/Bag) | ||||||
| 1440099: 3/4" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 5096097: 3/4" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 1425099: 3/4" SS PEX Pinch Clamp Handi PAC (50pcs) | ||||||
| 1410010: 1" SS.PEX Pinch Clamp Bulk | ||||||
| 1410077: 3/8" SS PEX Pinch Clamps | ||||||
| 1410079: 5/8" SS PEX Pinch Clamps | ||||||
Pinch Clamp |
SS |
Waterline |
CSA B137.5 |
|||
| 1410088: 1/2" SS.PEX Pinch Clamp Bulk( 50 pcs/Bag) | ||||||
| 1440088: 1/2" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 5096088: 1/2" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 1425077: 1/2" SS PEX Pinch Clamp Handi PAC (50pcs) | ||||||
| 1410099: 3/4" SS.PEX Pinch Clamp Bulk( 50 pcs/Bag) | ||||||
| 1440099: 3/4" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 5096097: 3/4" SS Surlok Clamp For PEX (6 Bag) | ||||||
| 1425099: 3/4" SS PEX Pinch Clamp Handi PAC (50pcs) | ||||||
| 1410010: 1" SS.PEX Pinch Clamp Bulk | ||||||
| 1410077: 3/8" SS PEX Pinch Clamps | ||||||
| 1410079: 5/8" SS PEX Pinch Clamps | ||||||
| Watts Regulator Company | |
| 815 Chestnut Street | |
| North Andover, MA 01845 | |
| United States | |
| 978-689-6064 | |
| Visit this company's website |
Facility : Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp[1] [2] |
SS |
Watts PEX |
ASTMF2098 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp |
SS |
Watts PEX |
ASTM F877 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Pinch Clamp |
SS |
Watts PEX |
CSA B137.5 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Pinch Clamp |
SS |
Watts PEX |
ASTMF2098 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Pinch Clamp |
SS |
Watts PEX |
ASTM F877 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Pinch Clamp |
SS |
Watts PEX |
CSA B137.5 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp[1] [2] |
SS |
Watts PEX |
ASTMF2098 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp |
SS |
Watts PEX |
ASTM F877 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Pinch Clamp |
SS |
Watts PEX |
CSA B137.5 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Pinch Clamp |
SS |
Watts PEX |
ASTMF2098 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Pinch Clamp |
SS |
Watts PEX |
ASTM F877 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
Pinch Clamp |
SS |
Watts PEX |
CSA B137.5 |
|||
| 81004993 PCCC2X-10 Cinch Clamp, 3/8", PEX-10 | ||||||
| 0650537 WP9S-06PB 3/8 Cinch Clamps-SS | ||||||
| 0650541 WP9S-06 3/8 Cinch Clamps-SS | ||||||
| 81004995 PCCC3X-10 Cinch Clamp 1/2” PEX-10 | ||||||
| 81004996 PCCC3X-100 Cinch Clamp 1/2" PEX-100 | ||||||
| 0650538 WP9S-08PB 1/2 Cinch Clamps-SS | ||||||
| 0650542 WP9S-08 1/2 Cinch Clamps-SS | ||||||
| 81005114 PCCC6X-10 Cinch Clamp, 5/8” PEX-10 | ||||||
| 81005115 PCCC6X-100 Cinch Clamp, 5/8”, PEX-100 | ||||||
| 81004997 PCCC4X-10 Cinch Clamp 3/4" PEX-10 | ||||||
| 81004998 PCCC4X-100 Cinch Clamp 3/4" PEX-100 | ||||||
| 0650539 WP9S-12PB 3/4 Cinch Clamps-Ss | ||||||
| 0650543 WP9S-12 3/4 Cinch Clamps-SS | ||||||
| 81005001 PCCC5X-10 Cinch Clamp 1" PEX-10 | ||||||
| 0650540 WP9S-16PB 1 Cinch Clamps-SS | ||||||
| 0650544 WP9S-16 1 Cinch Clamps-SS | ||||||
| Yueqing Dongbo Electromechanical Co., Ltd. | |
| Xizhu Industrial Zone Shifan Yueqing | |
| Zhejiang 325608 | |
| China | |
| 86 577 6231 2247 |
Facility : Zhejiang, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
ASTM F2098 |
|||
| 3/8" T (PEX133T) | ||||||
| 1/2" T (PEX175T) | ||||||
| 3/4" T (PEX233T) | ||||||
| 5/8" T (PEX208T) | ||||||
| 1" T (PEX296T) | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp |
SS |
SS Clamp |
ASTM F2098 |
|||
| 3/8" (PEX133) | ||||||
| 1/2" (PEX175) | ||||||
| 1/2" T (PEX175T) | ||||||
| 5/8" (PEX206) | ||||||
| 3/4" (PEX233) | ||||||
| 3/4" T (PEX233T) | ||||||
| 1" (PEX296) | ||||||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
CSA B137.5 |
|||
| 3/8" T (PEX133T) | ||||||
| 1/2" T (PEX175T) | ||||||
| 3/4" T (PEX233T) | ||||||
| 5/8" T (PEX208T) | ||||||
| 1" T (PEX296T) | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp |
SS |
SS Clamp |
ASTM F877 |
|||
| 1/2" (PEX175) | ||||||
| 5/8" (PEX206) | ||||||
| 3/4" (PEX233) | ||||||
| 1" (PEX296) | ||||||
| 3/8" (PEX133) | ||||||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
ASTM F877 |
|||
| 1" T (PEX296T) | ||||||
| 5/8" T (PEX208T) | ||||||
| 3/4" T (PEX233T) | ||||||
| 1/2" T (PEX175T) | ||||||
| 3/8" T (PEX133T) | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp |
SS |
SS Clamp |
CSA B137.5 |
|||
| 3/8" (PEX133) | ||||||
| 1/2" (PEX175) | ||||||
| 5/8" (PEX206) | ||||||
| 3/4" (PEX233) | ||||||
| 1" (PEX296) | ||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp |
SS |
SS Clamp |
ASTM F2098 |
|||
| 3/8" (PEX133) | ||||||
| 1/2" (PEX175) | ||||||
| 1/2" T (PEX175T) | ||||||
| 5/8" (PEX206) | ||||||
| 3/4" (PEX233) | ||||||
| 3/4" T (PEX233T) | ||||||
| 1" (PEX296) | ||||||
Pinch Clamp |
SS |
SS Clamp |
ASTM F877 |
|||
| 3/4" (PEX233) | ||||||
| 1" (PEX296) | ||||||
| 5/8" (PEX206) | ||||||
| 1/2" (PEX175) | ||||||
| 3/8" (PEX133) | ||||||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
ASTM F877 |
|||
| 3/8" T (PEX133T) | ||||||
| 3/4" T (PEX233T) | ||||||
| 5/8" T (PEX208T) | ||||||
| 1" T (PEX296T) | ||||||
| 1/2" T (PEX175T) | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp |
SS |
SS Clamp |
CSA B137.5 |
|||
| 3/8" (PEX133) | ||||||
| 1/2" (PEX175) | ||||||
| 5/8" (PEX206) | ||||||
| 3/4" (PEX233) | ||||||
| 1" (PEX296) | ||||||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
ASTM F2098 |
|||
| 3/4" T (PEX233T) | ||||||
| 1" T (PEX296T) | ||||||
| 5/8" T (PEX208T) | ||||||
| 3/8" T (PEX133T) | ||||||
| 1/2" T (PEX175T) | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp[1] [2] |
SS |
SS Clamp |
CSA B137.5 |
|||
| 3/8" T (PEX133T) | ||||||
| 1/2" T (PEX175T) | ||||||
| 3/4" T (PEX233T) | ||||||
| 5/8" T (PEX208T) | ||||||
| 1" T (PEX296T) | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
| Zurn PEX, Inc. | |
| 116 Maple Street | |
| Commerce, TX 75428 | |
| United States | |
| 903-886-9337 |
Facility : # 3 USA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings* |
SS |
Crimp Ring |
ASTM F2098 |
||||
| 3/8" | 1/2" | 5/8" | 3/4" | ||||
| 1" | |||||||
* Fittings may be marked with metric size designation. |
|||||||
Fittings* |
SS |
Crimp Ring |
ASTM F877 |
||||
| 3/8" | 1/2" | 5/8" | 3/4" | ||||
| 1" | |||||||
* Fittings may be marked with metric size designation. |
|||||||
Fittings* ¢ |
SS |
Crimp Ring |
CSA B137.5 |
||||
| 3/8" | 1/2" | 5/8" | 3/4" | ||||
| 1" | |||||||
* Fittings may be marked with metric size designation. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
| Zurn PEX, Inc. | |
| 116 Maple Street | |
| Commerce, TX 75428 | |
| United States | |
| 855-663-9876 | |
| 903-886-9337 | |
| Visit this company's website |
Facility : # 9 China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp[1] [2] |
SS |
SS Crimp ring |
ASTM F2098 |
|||
| QSSRPG2X | ||||||
| QSSRPG3X | ||||||
| QSSRPG4X | ||||||
| QSSRPG5X | ||||||
| QSSRPGJX | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp |
SS |
SS Crimp ring |
ASTM F877 |
|||
| QSSRPG2X | ||||||
| QSSRPG3X | ||||||
| QSSRPG4X | ||||||
| QSSRPG5X | ||||||
| QSSRPGJX | ||||||
Pinch Clamp |
SS |
SS Crimp ring |
CSA B137.5 |
|||
| QSSRPG2X | ||||||
| QSSRPG3X | ||||||
| QSSRPG4X | ||||||
| QSSRPG5X | ||||||
| QSSRPGJX | ||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | |||
Pinch Clamp[1] [2] |
SS |
SS Crimp ring |
ASTM F2098 |
|||
| QSSRPG2X | ||||||
| QSSRPG3X | ||||||
| QSSRPG4X | ||||||
| QSSRPG5X | ||||||
| QSSRPGJX | ||||||
[1] Product is non-water contact.
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
|
||||||
Pinch Clamp |
SS |
SS Crimp ring |
ASTM F877 |
|||
| QSSRPG2X | ||||||
| QSSRPG3X | ||||||
| QSSRPG4X | ||||||
| QSSRPG5X | ||||||
| QSSRPGJX | ||||||
Pinch Clamp |
SS |
SS Crimp ring |
CSA B137.5 |
|||
| QSSRPG2X | ||||||
| QSSRPG3X | ||||||
| QSSRPG4X | ||||||
| QSSRPG5X | ||||||
| QSSRPGJX | ||||||
| Zurn PEX, Inc. | |
| 116 Maple Street | |
| Commerce, TX 75428 | |
| United States | |
| 513-687-2456 |
Facility : Sriracha, Thailand
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings§ [1] |
SS |
dwb |
ASTMF2098 |
||||
|
Pinch Clamp[2] |
|||||||
| QSSRPG2X | QSSRPG3X | QSSRPGJX | QSSRPG4X | ||||
| QSSRPG5X | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
dwb |
ASTMF877 |
||||
|
Pinch Clamp[2] |
|||||||
| QSSRPG2X | QSSRPG3X | QSSRPGJX | QSSRPG4X | ||||
| QSSRPG5X | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings¢ § [1] |
SS |
dwb |
CSAB137.5 |
||||
|
Pinch Clamp[2] |
|||||||
| QSSRPG2X | QSSRPG3X | QSSRPGJX | QSSRPG4X | ||||
| QSSRPG5X | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Radiant Floor Heating
| Product Type | Material Type | Trade Name | Product Standard | ||||
Fittings§ [1] |
SS |
dwb |
ASTMF2098 |
||||
|
Pinch Clamp[2] |
|||||||
| QSSRPG2X | QSSRPG3X | QSSRPGJX | QSSRPG4X | ||||
| QSSRPG5X | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings§ [1] |
SS |
dwb |
ASTMF877 |
||||
|
Pinch Clamp[2] |
|||||||
| QSSRPG2X | QSSRPG3X | QSSRPGJX | QSSRPG4X | ||||
| QSSRPG5X | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
Fittings¢ § [1] |
SS |
dwb |
CSAB137.5 |
||||
|
Pinch Clamp[2] |
|||||||
| QSSRPG2X | QSSRPG3X | QSSRPGJX | QSSRPG4X | ||||
| QSSRPG5X | |||||||
[2] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
prior to presetting. As-sold dimensions are per manufacturer's specifications.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Product is non-water contact. |
|||||||
MP
Mechanical Plumbing Products
Mechanical Plumbing Products
| BLUCHER Metal A/S | |
| Pugdalvej 1 | |
| 7480 Vildbjerg | |
| Denmark | |
| 45 99 92 08 00 | |
| Visit this company's website |
Facility : Spindale, NC
| Product Type | Material Type | Trade Name | Product Standard | ||||
Floor Cleanout§ [1] |
SS |
BCO Series |
ASME A112.6.3 |
||||
| 144.150.110 S Floor Cleanout w/ Square Top, Pull Nipple | 144.155.110 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.155.110.10 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.155.110.10 S Series Cleanouts | ||||
| 144.200.160 S Floor Cleanout w/ Square Top, Pull Nipple | 144.205.160 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.205.160.10 S Floor Cleanout w/ Square Top for Vacuum Handle | 199-13488-01 S Floor Cleanout w/ Round Top, Pull Nipple p for Vacuum Handle | ||||
| 199-13488-02 S Floor Cleanout w/ Round Top for Vacuum Handle | 244.155.110 S Floor Cleanout w/ Surface Membrane Clamp for Vacuum Handle | 660FH004-06 16" x 16" Kitchen Channel[3] | 660FH004-11 16" x 16" Kitchen Channel[3] | ||||
| 660FH004-15 16" x 16" Kitchen Channel[3] | 660FH008-06 16" x 32" Kitchen Channel[3] | 660FH008-11 16" x 32" Kitchen Channel[3] | 660FH008-15 16" x 32" Kitchen Channel[3] | ||||
| 660FK004-06 16" x 16" Kitchen Channel[3] | 660FK004-11 16" x 16" Kitchen Channel[3] | 660FK004-15 16" x 16" Kitchen Channel[3] | 660FK008-06 16" x 32" Kitchen Channel[3] | ||||
| 660FK008-11 16" x 32" Kitchen Channel[3] | 660FK008-15 16" x 32" Kitchen Channel[3] | 660GH005-06 20" X 20" Kitchen Channel[3] | 660GH005-11 20" X 20" Kitchen Channel[3] | ||||
| 660GH005-15 20" X 20" Kitchen Channel[3] | 660GH010-15 20" X 40" Kitchen Channel[3] | 660GK005-06 20" X 20" Kitchen Channel[3] | 660GK005-11 20" X 20" Kitchen Channel[3] | ||||
| 660GK005-15 20" X 20" Kitchen Channel[3] | 660GK010-06 20" X 40" Kitchen Channel[3] | 660GK010-11 20" X 40" Kitchen Channel[3] | 660GK010-15 20" X 40" Kitchen Channel[3] | ||||
| 755.513.110 Sanitary Floor Drain w/ 12" Round Top | 755.513.160 Sanitary Floor Drain w/ 12" Round Top | 760.002.075 On-Grade Adjustable Floor Drain w/ 8" x 8" Square Top[4] | 760.002.110 On-Grade Adjustable Floor Drain w/ 8" x 8" Square Top[4] | ||||
| 760.003.110 On-Grade Adjustable Floor Drain w/ 12" x 12" Square Top[4] | 760.003.160 On-Grade Adjustable Floor Drain w/ 12" x 12" Square Top[4] | 760.602.075 Sanitary Floor Drain w/ 8" Round Top, Surface Membrane Clamp[4] | 760.602.110 Sanitary Floor Drain w/ 8" Round Top, Surface Membrane Clamp[4] | ||||
| 760.603.110 Sanitary Floor Drain w/ 12" Round Top, Surface Membrane Clamp[4] | 760.603.160 Sanitary Floor Drain w/ 12" Round Top, Surface Membrane Clamp[4] | 766.402.110 Sanitary Floor Drain w/ 8" x 8" Square Top[4] | 766.403.075 Sanitary Floor Drain w/ 12" x 12" Square Top[4] | ||||
| 766.403.110 Sanitary Floor Drain w/ 12" x 12" Square Top | 766.403.160 Sanitary Floor Drain w/ 12" x 12" Square Top[4] | 766.502.075 Sanitary Floor Drain w/ 8" Round Top[4] | 766.502.110 Sanitary Floor Drain w/ 8" Round Top[4] | ||||
| 766.503.110 Sanitary Floor Drain w/ 12" Round Top[4] | 766.503.160 Sanitary Floor Drain w/ 12" Round Top +C25[4] | 767.402.075 Sanitary Floor Drain w/ 8" x 8" Square Top[4] | 767.402.110 Sanitary Floor Drain w/ 8" x 8" Square Top[4] | ||||
| 767.403.110 Sanitary Floor Drain w/ 12" x 12" Square Top[4] | 767.403.160 Sanitary Floor Drain w/ 12" x 12" Square Top[4] | 775.002.075 Adjustable Floor Drain w/ 8" x 8" Square Top, Membrane Clamp[4] | 775.002.110 Adjustable Floor Drain w/ 8" x 8" Square Top, Membrane Clamp[4] | ||||
| 775.003.075 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp[4] | 775.003.110 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp[4] | 775.003.160 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp[4] | BCO 130 Series Cleanouts | ||||
| BCO-114 | BCO-116 | BCO-124 | BCO-126 | ||||
| BCO-134 | BCO-136 | BCO-144 | BCO-154 | ||||
| BCO-224 | BFD-344 | ||||||
[3] BFD Series Round Drains approved for bottom and side outlet sizes 4" and 6".
[4] BSS Series Drains approved for 2'' side outlet and bottom sizes (2")
Grate options (suffix):
None - Vienna (standard)
A - Athens
D - Detroit
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] BCO Cleanouts
Load Rating: Heavy Duty (HD)
316 - Type 316 Stainless Steel
VH4 - Small Vacuum Handle
VH6 - Large Vacuum Handle
|
|||||||
Floor Drains§ [2] |
SS |
BFD Series |
ASME A112.6.3 |
||||
| 144.150.110 S Floor Cleanout w/ Square Top, Pull Nipple | 144.155.110 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.155.110.10 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.155.110.10 S Series Cleanouts | ||||
| 144.200.160 S Floor Cleanout w/ Square Top, Pull Nipple | 144.205.160 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.205.160.10 S Floor Cleanout w/ Square Top for Vacuum Handle | 199-13488-01 S Floor Cleanout w/ Round Top, Pull Nipple | ||||
| 199-13488-02 S Floor Cleanout w/ Round Top for Vacuum Handle | 244.155.110 S Floor Cleanout w/ Surface Membrane Clamp for Vacuum Handle | 660FH004-06 16" x 16" Kitchen Channel | 660FH004-11 16" x 16" Kitchen Channel | ||||
| 660FH004-15 16" x 16" Kitchen Channel | 660FH008-06 16" x 32" Kitchen Channel | 660FH008-11 16" x 32" Kitchen Channel | 660FH008-15 16" x 32" Kitchen Channel | ||||
| 660FK004-06 16" x 16" Kitchen Channel | 660FK004-11 16" x 16" Kitchen Channel | 660FK004-15 16" x 16" Kitchen Channel | 660FK008-06 16" x 32" Kitchen Channel | ||||
| 660FK008-11 16" x 32" Kitchen Channel | 660FK008-15 16" x 32" Kitchen Channel | 660GH005-06 20" X 20" Kitchen Channel | 660GH005-11 20" X 20" Kitchen Channel | ||||
| 660GH005-15 20" X 20" Kitchen Channel | 660GH010-15 20" X 40" Kitchen Channel | 660GK005-06 20" X 20" Kitchen Channel | 660GK005-11 20" X 20" Kitchen Channel | ||||
| 660GK005-15 20" X 20" Kitchen Channel | 660GK010-06 20" X 40" Kitchen Channel | 660GK010-11 20" X 40" Kitchen Channel | 660GK010-15 20" X 40" Kitchen Channel | ||||
| 755.513.110 Sanitary Floor Drain w/ 12" Round Top | 755.513.160 Sanitary Floor Drain w/ 12" Round Top | 760.002.075 On-Grade Adjustable Floor Drain w/ 8" x 8" Square Top | 760.002.110 On-Grade Adjustable Floor Drain w/ 8" x 8" Square Top | ||||
| 760.003.110 On-Grade Adjustable Floor Drain w/ 12" x 12" Square Top | 760.003.160 On-Grade Adjustable Floor Drain w/ 12" x 12" Square Top | 760.602.075 Sanitary Floor Drain w/ 8" Round Top, Surface Membrane Clamp | 760.602.110 Sanitary Floor Drain w/ 8" Round Top, Surface Membrane Clamp | ||||
| 760.603.110 Sanitary Floor Drain w/ 12" Round Top, Surface Membrane Clamp | 760.603.160 Sanitary Floor Drain w/ 12" Round Top, Surface Membrane Clamp | 766.402.110 Sanitary Floor Drain w/ 8" x 8" Square Top | 766.403.075 Sanitary Floor Drain w/ 12" x 12" Square Top | ||||
| 766.403.110 Sanitary Floor Drain w/ 12" x 12" Square Top | 766.403.160 Sanitary Floor Drain w/ 12" x 12" Square Top | 766.502.075 Sanitary Floor Drain w/ 8" Round Top | 766.502.110 Sanitary Floor Drain w/ 8" Round Top | ||||
| 766.503.110 Sanitary Floor Drain w/ 12" Round Top | 766.503.160 Sanitary Floor Drain w/ 12" Round Top +C25 | 767.402.075 Sanitary Floor Drain w/ 8" x 8" Square Top | 767.402.110 Sanitary Floor Drain w/ 8" x 8" Square Top | ||||
| 767.403.110 Sanitary Floor Drain w/ 12" x 12" Square Top | 767.403.160 Sanitary Floor Drain w/ 12" x 12" Square Top | 775.002.075 Adjustable Floor Drain w/ 8" x 8" Square Top, Membrane Clamp | 775.002.110 Adjustable Floor Drain w/ 8" x 8" Square Top, Membrane Clamp | ||||
| 775.003.075 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp | 775.003.110 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp | 775.003.160 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp | BCO 130 Series Cleanouts | ||||
| BCO-114 | BCO-116 | BCO-124 | BCO-126 | ||||
| BCO-134 | BCO-136 | BCO-144 | BCO-154 | ||||
| BCO-224 | BFD-113 | BFD-114 | BFD-133 | ||||
| BFD-134 | BFD-136 | BFD-213 | BFD-214 | ||||
| BFD-233 | BFD-234 | BFD-236 | BFD-324 | ||||
| BFD-343 | BFD-344 | BFD-346 | BFD-423 | ||||
| BFD-424 | BFD-444 | BFD-446 | BFD-513 | ||||
| BFD-514 | BFD-534 | BFD-536 | BFD-553 | ||||
| BFD-554 | BFD-564 | BFD-566 | BFD-574 - SO | ||||
| BFD-576 | BKC-104-2 | BKC-104-4 | BKC-104-6 | ||||
| BKC-106-2 | BKC-106-4 | BKC-106-6 | BKC-204-2 | ||||
| BKC-204-4 | BKC-204-6 | BKC-206-2 | BKC-206-4 | ||||
| BKC-206-6 | BKC-304-2 | BKC-304-4 | BKC-304-6 | ||||
| BKC-306-2 | BKC-306-4 | BKC-306-6 | BKC-404-6 | ||||
| BKC-406-2 | BKC-406-4 | BKC-406-6 | |||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[2] BFD Series Drains approved for bottom and side outlet sizes 2", 4" and 6"
Suffix indicates model options
No suffix indicates bottom outlet
SO - Side Outlet
316 - Type 316 Stainless Steel
B - Sediment Basket
DS - Dome Strainer
P - Stainless Steel P-Trap
SB - Sand Bucket
TPT - Trap Primer tapping
VP - Grate Secured w/ Vandal Proof Screws
Grate Options:
HG - Hygenic-Pro (Heavy Duty), which includes the following grates:
BHG-8
BHG-12
LG - Ladder (Extra Heavy Duty), which includes the following grates:
BLG-8
BLG-12
MG - Mesh (Heavy Duty), which includes the following grates:
BMG-8
BMG-12
SG - Slot (Heavy Duty), which includes the following grates:
BSG-8
BSG-12
BKC Series Drains
Suffix indicates model options:
316 - Type 316 Stainless Steel
B - Sediment Basket
E - Edge Infill
FC - Outlet w/ Flushing Flange and Clamp
LD - Grate Locking Device
P - Stainless Steel P-Trap
SB - Sand Bucket (6" (160) Outlet Only)
|
|||||||
Trench Drains§ [6] |
SS |
BT Series |
ASME A112.6.3 |
||||
| 670 Series 6" Wide Pre-Sloped Trench Drains | 670 Series 6" Wide Pre-Sloped Trench Drains | 671 Series 6" Wide Pre-Sloped Trench Drains | 672 Series 6" Wide Pre-Sloped Trench Drains | ||||
| BT12 | BT6 | BT6-0 | BTV6 | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[6] Series BT Trench Drains - All grates have a maximum outlet size of 6", with the
exception of BT6-SH6, which has a maximum pipe outlet size of 5".
Standard grate option is 1" mesh, which includes the following grates:
BTG-M6 (Heavy Duty)
BTG-M8 (Heavt Duty)
BTG-M12 (Medium Duty)
Suffixes indicating alternate grate options:
HG - Hygenic-Pro Grating, which includes the following grates:
BTG-H6 (Heavy Duty)
BTG-H8 (Heavy Duty)
LG - Ladder Grating, which includes the following grates:
BTG-L6 (Heavy Duty)
BTG-L8 (Heavy Duty)
SG - Slot Grating, which includes the following grates:
BTG-S6 (Heavy Duty)
BTG-S8 (Heavy Duty)
SH - Shower Grating, which includes the following grates:
BT6-SH6 (Light Duty)
XLG - Extra Heavy Duty Ladder Grating, which includes the following grates:
BTG-XL6 (Extra Heavy Duty)
BTG-XL8 (Extra Heavy Duty)
BTG-XL12 (Extra Heavy Duty)
Additional model options:
316 - Typer 316 Stainless Steel
B - Sediment Basket
E - Edge Infill
FC - Outlet w/ Flashing Flange & Clamp
LD - Grate Locking Device
P - Stainless Steel P-Trap
O - Outlet Box
|
|||||||
Trench Drains§ |
SS |
BHG Series |
ASME A112.6.3 |
||||
| 676 Series HygienicPro Trench Drain[7] | BHG series - HygienicPro Trench Drain[7] | ||||||
[7] BHG Series Round Drains w/ trench drain approved for bottom and side outlet sizes 4". § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Floor Drains¢ § |
SS |
Blucher |
ASME A112.6.7/CSA B79.7 |
||||
|
BFD-320 Series [9] |
|||||||
| BFD-324 Sanitary Floor Drain w/ 8" x 8" Square Top[1] | |||||||
|
BFD-420 Series [10] |
|||||||
| BFD-424 Sanitary Floor Drain w/ 8" Round Top[2] | |||||||
[1] BCO Cleanouts
Load Rating: Heavy Duty (HD)
316 - Type 316 Stainless Steel
VH4 - Small Vacuum Handle
VH6 - Large Vacuum Handle
[9] The BFD 320 Series of drains is approved for a bottom outlet size of 4".
Approved BFD-320 series grate options:
HG - Hygienic-Pro (Heavy Duty)
LG - Ladder (Extra Heavy Duty)
MG - Mesh (Heavy Duty)
XXLG - Fully Welded Ladder (Heavy Duty)
Suffix indicates model options:
No suffix indicates bottom outlet
316 - Type 316 Stainless Steel
B - Sediment Basket
DS - Dome Strainer
P - Stainless Steel P-Trap
SB - Sand Bucket
TPT - Trap Primer tapping
VP - Grate Secured w/ Vandal Proof Screws
[2] BFD Series Drains approved for bottom and side outlet sizes 2", 4" and 6"
Suffix indicates model options
No suffix indicates bottom outlet
SO - Side Outlet
316 - Type 316 Stainless Steel
B - Sediment Basket
DS - Dome Strainer
P - Stainless Steel P-Trap
SB - Sand Bucket
TPT - Trap Primer tapping
VP - Grate Secured w/ Vandal Proof Screws
Grate Options:
HG - Hygenic-Pro (Heavy Duty), which includes the following grates:
BHG-8
BHG-12
LG - Ladder (Extra Heavy Duty), which includes the following grates:
BLG-8
BLG-12
MG - Mesh (Heavy Duty), which includes the following grates:
BMG-8
BMG-12
SG - Slot (Heavy Duty), which includes the following grates:
BSG-8
BSG-12
BKC Series Drains
Suffix indicates model options:
316 - Type 316 Stainless Steel
B - Sediment Basket
E - Edge Infill
FC - Outlet w/ Flushing Flange and Clamp
LD - Grate Locking Device
P - Stainless Steel P-Trap
SB - Sand Bucket (6" (160) Outlet Only)
[10] The BFD 420 Series of drains is approved for a bottom outlet size of 4”.
Approved BFD-420 series grate options:
HG - Hygienic-Pro (Heavy Duty)
LG - Ladder (Extra Heavy Duty)
MG - Mesh (Heavy Duty)
XXLG - Fully Welded Ladder (Heavy Duty)
Suffix indicates model options:
No suffix indicates bottom outlet
316 - Type 316 Stainless Steel
B - Sediment Basket
DS - Dome Strainer
P - Stainless Steel P-Trap
SB - Sand Bucket
TPT - Trap Primer tapping
VP - Grate Secured w/ Vandal Proof Screws
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Facility : Vildbjerg, Denmark
| Product Type | Material Type | Trade Name | Product Standard | ||||
Floor Cleanout§ [1] |
SS |
BCO Series |
ASME A112.6.3 |
||||
| 144.150.110 S Floor Cleanout w/ Square Top, Pull Nipple | 144.155.110 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.155.110.10 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.155.110.10 S Series Cleanouts | ||||
| 144.200.160 S Floor Cleanout w/ Square Top, Pull Nipple | 144.205.160 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.205.160.10 S Floor Cleanout w/ Square Top for Vacuum Handle | 199-13488-01 S Floor Cleanout w/ Round Top, Pull Nipple p for Vacuum Handle | ||||
| 199-13488-02 S Floor Cleanout w/ Round Top for Vacuum Handle | 244.155.110 S Floor Cleanout w/ Surface Membrane Clamp for Vacuum Handle | 660FH004-06 16" x 16" Kitchen Channel[3] | 660FH004-11 16" x 16" Kitchen Channel[3] | ||||
| 660FH004-15 16" x 16" Kitchen Channel[3] | 660FH008-06 16" x 32" Kitchen Channel[3] | 660FH008-11 16" x 32" Kitchen Channel[3] | 660FH008-15 16" x 32" Kitchen Channel[3] | ||||
| 660FK004-06 16" x 16" Kitchen Channel[3] | 660FK004-11 16" x 16" Kitchen Channel[3] | 660FK004-15 16" x 16" Kitchen Channel[3] | 660FK008-06 16" x 32" Kitchen Channel[3] | ||||
| 660FK008-11 16" x 32" Kitchen Channel[3] | 660FK008-15 16" x 32" Kitchen Channel[3] | 660GH005-06 20" X 20" Kitchen Channel[3] | 660GH005-11 20" X 20" Kitchen Channel[3] | ||||
| 660GH005-15 20" X 20" Kitchen Channel[3] | 660GH010-15 20" X 40" Kitchen Channel[3] | 660GK005-06 20" X 20" Kitchen Channel[3] | 660GK005-11 20" X 20" Kitchen Channel[3] | ||||
| 660GK005-15 20" X 20" Kitchen Channel[3] | 660GK010-06 20" X 40" Kitchen Channel[3] | 660GK010-11 20" X 40" Kitchen Channel[3] | 660GK010-15 20" X 40" Kitchen Channel[3] | ||||
| 755.513.110 Sanitary Floor Drain w/ 12" Round Top | 755.513.160 Sanitary Floor Drain w/ 12" Round Top | 760.002.075 On-Grade Adjustable Floor Drain w/ 8" x 8" Square Top[4] | 760.002.110 On-Grade Adjustable Floor Drain w/ 8" x 8" Square Top[4] | ||||
| 760.003.110 On-Grade Adjustable Floor Drain w/ 12" x 12" Square Top[4] | 760.003.160 On-Grade Adjustable Floor Drain w/ 12" x 12" Square Top[4] | 760.602.075 Sanitary Floor Drain w/ 8" Round Top, Surface Membrane Clamp[4] | 760.602.110 Sanitary Floor Drain w/ 8" Round Top, Surface Membrane Clamp[4] | ||||
| 760.603.110 Sanitary Floor Drain w/ 12" Round Top, Surface Membrane Clamp[4] | 760.603.160 Sanitary Floor Drain w/ 12" Round Top, Surface Membrane Clamp[4] | 766.402.110 Sanitary Floor Drain w/ 8" x 8" Square Top[4] | 766.403.075 Sanitary Floor Drain w/ 12" x 12" Square Top[4] | ||||
| 766.403.110 Sanitary Floor Drain w/ 12" x 12" Square Top | 766.403.160 Sanitary Floor Drain w/ 12" x 12" Square Top[4] | 766.502.075 Sanitary Floor Drain w/ 8" Round Top[4] | 766.502.110 Sanitary Floor Drain w/ 8" Round Top[4] | ||||
| 766.503.110 Sanitary Floor Drain w/ 12" Round Top[4] | 766.503.160 Sanitary Floor Drain w/ 12" Round Top +C25[4] | 767.402.075 Sanitary Floor Drain w/ 8" x 8" Square Top[4] | 767.402.110 Sanitary Floor Drain w/ 8" x 8" Square Top[4] | ||||
| 767.403.110 Sanitary Floor Drain w/ 12" x 12" Square Top[4] | 767.403.160 Sanitary Floor Drain w/ 12" x 12" Square Top[4] | 775.002.075 Adjustable Floor Drain w/ 8" x 8" Square Top, Membrane Clamp[4] | 775.002.110 Adjustable Floor Drain w/ 8" x 8" Square Top, Membrane Clamp[4] | ||||
| 775.003.075 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp[4] | 775.003.110 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp[4] | 775.003.160 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp[4] | BCO 130 Series Cleanouts | ||||
| BCO-114 | BCO-116 | BCO-124 | BCO-126 | ||||
| BCO-134 | BCO-136 | BCO-144 | BCO-154 | ||||
| BCO-224 | BFD-344 | ||||||
[3] BFD Series Round Drains approved for bottom and side outlet sizes 4" and 6".
[4] BSS Series Drains approved for 2" side outlet and bottom sizes (2")
Grate options (suffix):
None - Vienna (standard)
A - Athens
D - Detroit
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] BCO Cleanouts
Load Rating: Heavy Duty (HD)
316 - Type 316 Stainless Steel
VH4 - Small Vacuum Handle
VH6 - Large Vacuum Handle
|
|||||||
Floor Drains§ [2] |
SS |
BFD Series |
ASME A112.6.3 |
||||
| 144.150.110 S Floor Cleanout w/ Square Top, Pull Nipple | 144.155.110 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.155.110.10 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.155.110.10 S Series Cleanouts | ||||
| 144.200.160 S Floor Cleanout w/ Square Top, Pull Nipple | 144.205.160 S Floor Cleanout w/ Square Top for Vacuum Handle | 144.205.160.10 S Floor Cleanout w/ Square Top for Vacuum Handle | 199-13488-01 S Floor Cleanout w/ Round Top, Pull Nipple | ||||
| 199-13488-02 S Floor Cleanout w/ Round Top for Vacuum Handle | 244.155.110 S Floor Cleanout w/ Surface Membrane Clamp for Vacuum Handle | 660FH004-06 16" x 16" Kitchen Channel | 660FH004-11 16" x 16" Kitchen Channel | ||||
| 660FH004-15 16" x 16" Kitchen Channel | 660FH008-06 16" x 32" Kitchen Channel | 660FH008-11 16" x 32" Kitchen Channel | 660FH008-15 16" x 32" Kitchen Channel | ||||
| 660FK004-06 16" x 16" Kitchen Channel | 660FK004-11 16" x 16" Kitchen Channel | 660FK004-15 16" x 16" Kitchen Channel | 660FK008-06 16" x 32" Kitchen Channel | ||||
| 660FK008-11 16" x 32" Kitchen Channel | 660FK008-15 16" x 32" Kitchen Channel | 660GH005-06 20" X 20" Kitchen Channel | 660GH005-11 20" X 20" Kitchen Channel | ||||
| 660GH005-15 20" X 20" Kitchen Channel | 660GH010-15 20" X 40" Kitchen Channel | 660GK005-06 20" X 20" Kitchen Channel | 660GK005-11 20" X 20" Kitchen Channel | ||||
| 660GK005-15 20" X 20" Kitchen Channel | 660GK010-06 20" X 40" Kitchen Channel | 660GK010-11 20" X 40" Kitchen Channel | 660GK010-15 20" X 40" Kitchen Channel | ||||
| 755.513.110 Sanitary Floor Drain w/ 12" Round Top | 755.513.160 Sanitary Floor Drain w/ 12" Round Top | 760.002.075 On-Grade Adjustable Floor Drain w/ 8" x 8" Square Top | 760.002.110 On-Grade Adjustable Floor Drain w/ 8" x 8" Square Top | ||||
| 760.003.110 On-Grade Adjustable Floor Drain w/ 12" x 12" Square Top | 760.003.160 On-Grade Adjustable Floor Drain w/ 12" x 12" Square Top | 760.602.075 Sanitary Floor Drain w/ 8" Round Top, Surface Membrane Clamp | 760.602.110 Sanitary Floor Drain w/ 8" Round Top, Surface Membrane Clamp | ||||
| 760.603.110 Sanitary Floor Drain w/ 12" Round Top, Surface Membrane Clamp | 760.603.160 Sanitary Floor Drain w/ 12" Round Top, Surface Membrane Clamp | 766.402.110 Sanitary Floor Drain w/ 8" x 8" Square Top | 766.403.075 Sanitary Floor Drain w/ 12" x 12" Square Top | ||||
| 766.403.110 Sanitary Floor Drain w/ 12" x 12" Square Top | 766.403.160 Sanitary Floor Drain w/ 12" x 12" Square Top | 766.502.075 Sanitary Floor Drain w/ 8" Round Top | 766.502.110 Sanitary Floor Drain w/ 8" Round Top | ||||
| 766.503.110 Sanitary Floor Drain w/ 12" Round Top | 766.503.160 Sanitary Floor Drain w/ 12" Round Top +C25 | 767.402.075 Sanitary Floor Drain w/ 8" x 8" Square Top | 767.402.110 Sanitary Floor Drain w/ 8" x 8" Square Top | ||||
| 767.403.110 Sanitary Floor Drain w/ 12" x 12" Square Top | 767.403.160 Sanitary Floor Drain w/ 12" x 12" Square Top | 775.002.075 Adjustable Floor Drain w/ 8" x 8" Square Top, Membrane Clamp | 775.002.110 Adjustable Floor Drain w/ 8" x 8" Square Top, Membrane Clamp | ||||
| 775.003.075 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp | 775.003.110 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp | 775.003.160 Adjustable Floor Drain w/ 12" x 12" Square Top, Membrane Clamp | BCO 130 Series Cleanouts | ||||
| BCO-114 | BCO-116 | BCO-124 | BCO-126 | ||||
| BCO-134 | BCO-136 | BCO-144 | BCO-154 | ||||
| BCO-224 | BFD-113 | BFD-114 | BFD-133 | ||||
| BFD-134 | BFD-136 | BFD-213 | BFD-214 | ||||
| BFD-233 | BFD-234 | BFD-236 | BFD-324 | ||||
| BFD-343 | BFD-344 | BFD-346 | BFD-423 | ||||
| BFD-424 | BFD-444 | BFD-446 | BFD-513 | ||||
| BFD-514 | BFD-534 | BFD-536 | BFD-553 | ||||
| BFD-554 | BFD-564 | BFD-566 | BFD-574 - SO | ||||
| BFD-576 | BKC-104-2 | BKC-104-4 | BKC-104-6 | ||||
| BKC-106-2 | BKC-106-4 | BKC-106-6 | BKC-204-2 | ||||
| BKC-204-4 | BKC-204-6 | BKC-206-2 | BKC-206-4 | ||||
| BKC-206-6 | BKC-304-2 | BKC-304-4 | BKC-304-6 | ||||
| BKC-306-2 | BKC-306-4 | BKC-306-6 | BKC-404-6 | ||||
| BKC-406-2 | BKC-406-4 | BKC-406-6 | |||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[2] BFD Series Drains approved for bottom and side outlet sizes 2", 4" and 6"
Suffix indicates model options
No suffix indicates bottom outlet
SO - Side Outlet
316 - Type 316 Stainless Steel
B - Sediment Basket
DS - Dome Strainer
P - Stainless Steel P-Trap
SB - Sand Bucket
TPT - Trap Primer tapping
VP - Grate Secured w/ Vandal Proof Screws
Grate Options:
HG - Hygenic-Pro (Heavy Duty), which includes the following grates:
BHG-8
BHG-12
LG - Ladder (Extra Heavy Duty), which includes the following grates:
BLG-8
BLG-12
MG - Mesh (Heavy Duty), which includes the following grates:
BMG-8
BMG-12
SG - Slot (Heavy Duty), which includes the following grates:
BSG-8
BSG-12
BKC Series Drains
Suffix indicates model options:
316 - Type 316 Stainless Steel
B - Sediment Basket
E - Edge Infill
FC - Outlet w/ Flushing Flange and Clamp
LD - Grate Locking Device
P - Stainless Steel P-Trap
SB - Sand Bucket (6" (160) Outlet Only)
|
|||||||
Trench Drains§ [6] |
SS |
BT Series |
ASME A112.6.3 |
||||
| 670 Series 6" Wide Pre-Sloped Trench Drains | 670 Series 6" Wide Pre-Sloped Trench Drains | 671 Series 6" Wide Pre-Sloped Trench Drains | 672 Series 6" Wide Pre-Sloped Trench Drains | ||||
| BT12 | BT6 | BT6-0 | BTV6 | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[6] Series BT Trench Drains - All grates have a maximum outlet size of 6", with the
exception of BT6-SH6, which has a maximum pipe outlet size of 5".
Standard grate option is 1" mesh, which includes the following grates:
BTG-M6 (Heavy Duty)
BTG-M8 (Heavt Duty)
BTG-M12 (Medium Duty)
Suffixes indicating alternate grate options:
HG - Hygenic-Pro Grating, which includes the following grates:
BTG-H6 (Heavy Duty)
BTG-H8 (Heavy Duty)
LG - Ladder Grating, which includes the following grates:
BTG-L6 (Heavy Duty)
BTG-L8 (Heavy Duty)
SG - Slot Grating, which includes the following grates:
BTG-S6 (Heavy Duty)
BTG-S8 (Heavy Duty)
SH - Shower Grating, which includes the following grates:
BT6-SH6 (Light Duty)
XLG - Extra Heavy Duty Ladder Grating, which includes the following grates:
BTG-XL6 (Extra Heavy Duty)
BTG-XL8 (Extra Heavy Duty)
BTG-XL12 (Extra Heavy Duty)
Additional model options:
316 - Typer 316 Stainless Steel
B - Sediment Basket
E - Edge Infill
FC - Outlet w/ Flashing Flange & Clamp
LD - Grate Locking Device
P - Stainless Steel P-Trap
O - Outlet Box
|
|||||||
Trench Drains§ |
SS |
BHG Series |
ASME A112.6.3 |
||||
| 676 Series HygienicPro Trench Drain[7] | BHG series - HygienicPro Trench Drain[7] | ||||||
[7] BHG Series Round Drains w/ trench drain approved for bottom and side outlet sizes 4". § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Floor Drains¢ § |
SS |
Blucher |
ASME A112.6.7/CSA B79.7 |
||||
|
BFD-320 Series [9] |
|||||||
| BFD-324 Sanitary Floor Drain w/ 8" x 8" Square Top[1] | |||||||
|
BFD-420 Series [10] |
|||||||
| BFD-424 Sanitary Floor Drain w/ 8" Round Top[2] | |||||||
[1] BCO Cleanouts
Load Rating: Heavy Duty (HD)
316 - Type 316 Stainless Steel
VH4 - Small Vacuum Handle
VH6 - Large Vacuum Handle
[9] The BFD 320 Series of drains is approved for a bottom outlet size of 4".
Approved BFD-320 series grate options:
HG - Hygienic-Pro (Heavy Duty)
LG - Ladder (Extra Heavy Duty)
MG - Mesh (Heavy Duty)
XXLG - Fully Welded Ladder (Heavy Duty)
Suffix indicates model options:
No suffix indicates bottom outlet
316 - Type 316 Stainless Steel
B - Sediment Basket
DS - Dome Strainer
P - Stainless Steel P-Trap
SB - Sand Bucket
TPT - Trap Primer tapping
VP - Grate Secured w/ Vandal Proof Screws
[2] BFD Series Drains approved for bottom and side outlet sizes 2", 4" and 6"
Suffix indicates model options
No suffix indicates bottom outlet
SO - Side Outlet
316 - Type 316 Stainless Steel
B - Sediment Basket
DS - Dome Strainer
P - Stainless Steel P-Trap
SB - Sand Bucket
TPT - Trap Primer tapping
VP - Grate Secured w/ Vandal Proof Screws
Grate Options:
HG - Hygenic-Pro (Heavy Duty), which includes the following grates:
BHG-8
BHG-12
LG - Ladder (Extra Heavy Duty), which includes the following grates:
BLG-8
BLG-12
MG - Mesh (Heavy Duty), which includes the following grates:
BMG-8
BMG-12
SG - Slot (Heavy Duty), which includes the following grates:
BSG-8
BSG-12
BKC Series Drains
Suffix indicates model options:
316 - Type 316 Stainless Steel
B - Sediment Basket
E - Edge Infill
FC - Outlet w/ Flushing Flange and Clamp
LD - Grate Locking Device
P - Stainless Steel P-Trap
SB - Sand Bucket (6" (160) Outlet Only)
[10] The BFD 420 Series of drains is approved for a bottom outlet size of 4”.
Approved BFD-420 series grate options:
HG - Hygienic-Pro (Heavy Duty)
LG - Ladder (Extra Heavy Duty)
MG - Mesh (Heavy Duty)
XXLG - Fully Welded Ladder (Heavy Duty)
Suffix indicates model options:
No suffix indicates bottom outlet
316 - Type 316 Stainless Steel
B - Sediment Basket
DS - Dome Strainer
P - Stainless Steel P-Trap
SB - Sand Bucket
TPT - Trap Primer tapping
VP - Grate Secured w/ Vandal Proof Screws
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
| Calt International Co., Ltd. | |
| Flat/Rm. 1211 Wing On Centre | |
| 111 Connaught Road | |
| Central Hong Kong 999077 | |
| Hong Kong | |
| 86 186 8895 8002 |
Facility : Guangdong, China
| Product Type | Material Type | Trade Name | Product Standard | ||||
Stainless Steel Sinks¢ § [1] |
SS |
Keer Hardware |
ASME A112.19.3/CSA B45.4 |
||||
|
Bar Sink |
|||||||
| KBS-210LR | KBS-310LR | KBS-410LR | |||||
|
Double Drop-in Sink |
|||||||
| KDIS2-16147 | KDIS2-16148 | KDIS2-16198 | |||||
|
Double Drop-in Sink w/ Drain Board |
|||||||
| KDIS2-16148R21 | |||||||
|
Drop-in Sink |
|||||||
| KDIS1-122012 | KDIS1-141010 | KDIS1-14105 | KDIS1-16148 | ||||
| KDIS1-162012 | KDIS1-16208 | KDIS1-181815 | KDIS1-201612 | ||||
|
Hand Hygiene Sink (wall mount) |
|||||||
| KHHS-1215 | KHHS-1215-BP | ||||||
|
Hand Sink (wall mount) |
|||||||
| KHS-14 | KHS-14-1 | ||||||
|
Hand Washing Sink |
|||||||
| HSF14 | |||||||
|
Mop Sink |
|||||||
| KMS-16206 | KMS-20286 | ||||||
|
One Compartment Sink |
|||||||
| KCS1-182113-D-18 | KCS1-182113-L-18 | KCS1-182113-N | KCS1-182113-R-18 | ||||
| KCS1-242413-D-18 | KCS1-242413-L-18 | KCS1-242413-N | KCS1-242413-R-18 | ||||
| KS1-18 | KS1-181813-D-18 | KS1-181813-L-18 | KS1-181813-N | ||||
| KS1-181813-R-18 | KS1-24 | KS1-2436 | |||||
|
Sink Bowl |
|||||||
| KSB-1012106 | KSB-1014106 | KSB-1414146 | KSB-1616146 | ||||
| KSB-1620146 | KSB-1724106 | KSB-1818146 | KSB-1824146 | ||||
| KSB-2020146 | KSB-2024146 | KSB-2028186 | KSB-2118146 | ||||
| KSB-2424146 | |||||||
|
Soiled Dish Table |
|||||||
| KSDT-108L | KSDT-108R | KSDT-120L | KSDT-120R | ||||
| KSDT-132L | KSDT-132R | KSDT-144L | KSDT-144R | ||||
| KSDT-36L | KSDT-36R | KSDT-48L | KSDT-48R | ||||
| KSDT-60L | KSDT-60R | KSDT-72L | KSDT-72R | ||||
| KSDT-84L | KSDT-84R | KSDT-96L | KSDT-96R | ||||
|
Three Compartment Sink |
|||||||
| KCS3-182113-D-18 | KCS3-182113-L-18 | KCS3-182113-N | KCS3-182113-R-18 | ||||
| KCS3-242413-D-24 | KCS3-242413-L-24 | KCS3-242413-N | KCS3-242413-R-24 | ||||
| KS3-181813-D-18 | KS3-181813-L-18 | KS3-181813-N | KS3-181813-R-18 | ||||
| KS3-182113-D-18 | KS3-182113-L-18 | KS3-182113-N | KS3-182113-R-18 | ||||
|
Triple Drop-in Sink |
|||||||
| KDIS3-141610 | |||||||
|
Two Compartment Sink |
|||||||
| KCS2-182113-D-18 | KCS2-182113-L-18 | KCS2-182113-N | KCS2-182113-R-18 | ||||
| KCS2-242413-D-24 | KCS2-242413-L-24 | KCS2-242413-N | KCS2-242413-R-24 | ||||
| KS2-181813-D-18 | KS2-181813-L-18 | KS2-181813-N | KS2-181813-R-18 | ||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Sinks Certified without supply or waste fittings. |
|||||||
| Component Hardware Group, Inc. | |
| 6732 Shook Road | |
| Columbus, OH 43217 | |
| United States | |
| 800-526-3694 | |
| 732-363-4700 | |
| Visit this company's website |
Facility : Columbus, OH
| Product Type | Material Type | Trade Name | Product Standard | |||
Stainless Steel Sinks¢ § [2] [3] |
SS |
Encore |
ASME A112.19.3/CSA B45.4 |
|||
| FCA17D-101405B1 | ||||||
| FCA17D-10145-A | ||||||
| FCA17D-10145D0 | ||||||
| FCA17D-10145L0 | ||||||
| FCA17D-10145R0 | ||||||
| FCA17D-1410-05 | ||||||
| FCA17L-1014-10 | ||||||
| FCA17R-1014-10 | ||||||
| FCA18-090905B2 | ||||||
| FCA20-101405B0 | ||||||
| FCA20-101405B1 | ||||||
| FCA20-101405B2 | ||||||
| FCA20-101405D0 | ||||||
| FCA20-101405D1 | ||||||
| FCA20-101405D2 | ||||||
| FCA20-10145B23 | ||||||
| FCA20-12145B1S | ||||||
| FCAW-1614DADA | ||||||
| FCAW-162006B2 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[2] Sinks are certified with or without waste fittings.
[3] Products are in comlpinace with applicable sections of ICC/ANSI A117.1 accessible and
Usable Buildings and Facilities. Installation is per manufacturer's instructions and
the latest version of ICC/ANSI A117.1
|
||||||
Stainless Steel Sinks¢ § [3] |
SS |
Encore |
ASME A112.18.2/CSA B125.2 |
|||
| F3CS1-181812 | ||||||
| F3CS1-181812-D18 | ||||||
| F3CS1-181812-L18 | ||||||
| F3CS1-181812-R18 | ||||||
| F3CS1-242412 | ||||||
| F3CS1-242412-D24 | ||||||
| F3CS1-242412-L24 | ||||||
| F3CS1-242412-R24 | ||||||
| F3CS1-302412 | ||||||
| F3CS1-362412 | ||||||
| F3CS2-151512 | ||||||
| F3CS2-181812 | ||||||
| F3CS2-181812-D18 | ||||||
| F3CS2-181812-L18 | ||||||
| F3CS2-181812-R18 | ||||||
| F3CS2-242412 | ||||||
| F3CS2-242412-D24 | ||||||
| F3CS2-242412-L24 | ||||||
| F3CS2-242412-R24 | ||||||
| F3CS3-101410-D12 | ||||||
| F3CS3-121812 | ||||||
| F3CS3-121812-D18 | ||||||
| F3CS3-121812-L18 | ||||||
| F3CS3-121812-R18 | ||||||
| F3CS3-151512 | ||||||
| F3CS3-151512-D15 | ||||||
| F3CS3-151512-L15 | ||||||
| F3CS3-151512-R15 | ||||||
| F3CS3-181812 | ||||||
| F3CS3-181812-D18 | ||||||
| F3CS3-181812-D24 | ||||||
| F3CS3-181812-L18 | ||||||
| F3CS3-181812-L24 | ||||||
| F3CS3-181812-R18 | ||||||
| F3CS3-181812-R24 | ||||||
| F3CS3-182412 | ||||||
| F3CS3-182412-D18 | ||||||
| F3CS3-182412-D24 | ||||||
| F3CS3-182412-L18 | ||||||
| F3CS3-182412-L24 | ||||||
| F3CS3-182412-R18 | ||||||
| F3CS3-182412-R24 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[3] Products are in comlpinace with applicable sections of ICC/ANSI A117.1 accessible and
Usable Buildings and Facilities. Installation is per manufacturer's instructions and
the latest version of ICC/ANSI A117.1
|
||||||
$ XXX represents different spout lengths up to 18".
YYYY represents optional mounting kits, handles, or aerators.
[6] Product is a utility spray - not to be used as a pre-rinse spray valve.
[7] Knnn-X1X2X3X4-Y1Y2Y3
nnn - Faucet series
L41 - Encore deck mount faucet
L45 - Encore wall mount faucet
X1 – Inlet
4 - 4" c/c with 1/2" NPSM inlets
8 - 8" c/c with 1/2" NPSM inlets
X2 – Valve
0 - 1/4 Turn Standard Encore® Compression Valve
1 - 1/4 Turn Encore® Ceramic Valve
X3X4 – Spout
00 - 3 1/2" gooseneck spout
01 - 8 1/2" gooseneck spout
02 - 6" gooseneck spout
05 - 5" straight cast spout
06 - 6" straight spout
08 - 8" straight spout
09 - 9" tubular spout
10 - 10" straight spout
12 - 12" straight spout
13 - 13" double jointed spout
18 - 18" double jointed spout
50 - 6" spout 3/8" NPT x 2" riser
51 - 8" spout 3/8" NPT x 2" riser
52 - 12" spout 3/8" NPT x 2" riser
53 - 6" spout 3/8" NPT x 9" riser
54 - 8" spout 3/8" NPT x 9" riser
56 - 12" spout 3/8" NPT x 9" riser
“-“ – Universal Type Faucet Body (When Required)
U - 1/2" NPSM inlets with Straight Fittings
U - 1/2" NPSM inlets with Straight Fittings for KL41 Series
U - 1/2" NPSM inlets with 90° Swivel Spout Base & Elbow Fittings (for KL45
Series)
Y1 – Spout style
A - Swivel arched cast spout
B - Swivel bent riser tubular spout
C - Cast spout
D - Double jointed cast spout
G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet
K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet
R - Rigid tubular spout
S - Swivel tubular spout
T - Swivel cast spout
Y2 – Aerator
A - 0.5 GPM PCA spray vandal resistant
B - 1.5 GPM MAX laminar vandal resistant
C - 0.5 GPM PCA spray
D - 1.5 GPM MAX laminar
E - 2.2 GPM MAX aerated stream
F - 2.2 GPM MAX aerated stream vandal resistant
R - 3/8" threaded aerator (spout styles G and K only)
T - Serrated tip for hose (spout styles G and K only)
Y3 – Handle
1 - Standard Encore® lever
2 - Cross
4 - 4" wrist blade
5 - Standard lever w/ tamper proof screw
6 - 6" wrist blade
7 - 4" wrist blade w/ tamper proof screw
8 - 6" wrist blade w/ tamper proof screw
Facility : Zhejiang, China
| Product Type | Material Type | Trade Name | Product Standard | |||
Stainless Steel Sinks¢ § [3] |
SS |
Encore |
ASME A112.19.3/CSA B45.4 |
|||
| F3CS2-181812 | ||||||
| F3CS3-182412-R18 | ||||||
| F3CS3-182412-L24 | ||||||
| F3CS3-182412-L18 | ||||||
| F3CS3-182412-D24 | ||||||
| F3CS3-182412-D18 | ||||||
| F3CS3-182412 | ||||||
| F3CS3-181812-R24 | ||||||
| F3CS3-181812-R18 | ||||||
| F3CS3-181812-L24 | ||||||
| F3CS3-181812-L18 | ||||||
| F3CS3-181812-D24 | ||||||
| F3CS3-181812-D18 | ||||||
| F3CS3-181812 | ||||||
| F3CS3-151512-R15 | ||||||
| F3CS3-151512-L15 | ||||||
| F3CS3-151512-D15 | ||||||
| F3CS3-151512 | ||||||
| F3CS3-121812-R18 | ||||||
| F3CS1-181812 | ||||||
| F3CS1-181812-D18 | ||||||
| F3CS1-181812-L18 | ||||||
| F3CS1-181812-R18 | ||||||
| F3CS1-242412 | ||||||
| F3CS1-242412-D24 | ||||||
| F3CS1-242412-L24 | ||||||
| F3CS1-242412-R24 | ||||||
| F3CS1-302412 | ||||||
| F3CS1-362412 | ||||||
| F3CS2-151512 | ||||||
| F3CS3-182412-R24 | ||||||
| F3CS2-181812-D18 | ||||||
| F3CS2-181812-L18 | ||||||
| F3CS2-181812-R18 | ||||||
| F3CS2-242412 | ||||||
| F3CS2-242412-D24 | ||||||
| F3CS2-242412-L24 | ||||||
| F3CS2-242412-R24 | ||||||
| F3CS3-101410-D12 | ||||||
| F3CS3-121812 | ||||||
| F3CS3-121812-D18 | ||||||
| F3CS3-121812-L18 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[3] Products are in comlpinace with applicable sections of ICC/ANSI A117.1 accessible and
Usable Buildings and Facilities. Installation is per manufacturer's instructions and the
latest version of ICC/ANSI A117.1
|
||||||
Stainless Steel Sinks¢ § [2] [3] |
SS |
Encore |
ASME A112.19.3/CSA B45.4 |
|||
| FCA20-12145B1S | ||||||
| FCA17D-101405B1 | ||||||
| FCAW-162006B2 | ||||||
| FCAW-1614DADA | ||||||
| FCA20-10145B23 | ||||||
| FCA17L-1014-10 | ||||||
| FCA17R-1014-10 | ||||||
| FCA20-101405D2 | ||||||
| FCA20-101405D1 | ||||||
| FCA20-101405D0 | ||||||
| FCA20-101405B2 | ||||||
| FCA20-101405B1 | ||||||
| FCA18-090905B2 | ||||||
| FCA17D-1410-05 | ||||||
| FCA17D-10145R0 | ||||||
| FCA17D-10145L0 | ||||||
| FCA17D-10145D0 | ||||||
| FCA17D-10145-A | ||||||
| FCA20-101405B0 | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[2] Sinks are certified with or without waste fittings.
[3] Products are in comlpinace with applicable sections of ICC/ANSI A117.1 accessible and
Usable Buildings and Facilities. Installation is per manufacturer's instructions and the
latest version of ICC/ANSI A117.1
|
||||||
[6] Utility spray not to be used as a pre-rinse spray valve.
[7] Knnn-X1X2X3X4-Y1Y2Y3
nnn - Faucet series
L41 - Encore deck mount faucet
L45 - Encore wall mount faucet
X1 – Inlet
4 - 4" c/c with 1/2" NPSM inlets
8 - 8" c/c with 1/2" NPSM inlets
X2 – Valve
0 - 1/4 Turn Standard Encore® Compression Valve
1 - 1/4 Turn Encore® Ceramic Valve
X3X4 – Spout
00 - 3 1/2" gooseneck spout
01 - 8 1/2" gooseneck spout
02 - 6" gooseneck spout
05 - 5" straight cast spout
06 - 6" straight spout
08 - 8" straight spout
09 - 9" tubular spout
10 - 10" straight spout
12 - 12" straight spout
13 - 13" double jointed spout
18 - 18" double jointed spout
50 - 6" spout 3/8" NPT x 2" riser
51 - 8" spout 3/8" NPT x 2" riser
52 - 12" spout 3/8" NPT x 2" riser
53 - 6" spout 3/8" NPT x 9" riser
54 - 8" spout 3/8" NPT x 9" riser
56 - 12" spout 3/8" NPT x 9" riser
"-" – Universal Type Faucet Body (When Required)
U - 1/2" NPSM inlets with Straight Fittings for KL41 Series
U - 1/2" NPSM inlets with 90° Swivel Spout Base & Elbow Fittings (for KL45
Series)
Y1 – Spout style
A - Swivel arched cast spout
B - Swivel bent riser tubular spout
C - Cast spout
D - Double jointed cast spout
G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet
K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet
R - Rigid tubular spout
S - Swivel tubular spout
T - Swivel cast spout
Y2 – Aerator
A - 0.5 GPM PCA spray vandal resistant
B - 1.5 GPM MAX laminar vandal resistant
C - 0.5 GPM PCA spray
D - 1.5 GPM MAX laminar
E - 2.2 GPM MAX aerated stream
F - 2.2 GPM MAX aerated stream vandal resistant
R - 3/8" threaded aerator (spout styles G and K only)
T - Serrated tip for hose (spout styles G and K only)
Y3 – Handle
1 - Standard Encore® lever
2 - Cross
4 - 4" wrist blade
5 - Standard lever w/ tamper proof screw
6 - 6" wrist blade
7 - 4" wrist blade w/ tamper proof screw
8 - 6" wrist blade w/ tamper proof screw
| Eagle Group | |
| 100 Industrial Boulevard | |
| Clayton, DE 19938 | |
| United States | |
| 800-441-8440 | |
| 302-653-3000 | |
| Visit this company's website |
Facility : Clayton, DE
| Product Type | Material Type | Trade Name | Product Standard | ||||
Stainless Steel Sinks¢ [1] |
SS |
Eagle Group |
ASME A112.19.3/CSA B45.4 |
||||
|
Lavatory Sink[2] [3] |
|||||||
| (1)F1916-(4 ) | (1)HSA-10-(2)-(3) | (1)HSAD-10-(2)-(3) | (1)HSAN-10-(2)-(3) | ||||
| (1)HSAND-10-(2)-(3) | (1)HSANT-10-(2)-(3) | (1)HSAP-14-(3) | (1)HWB-(3) | ||||
| (1)HWC-(3) | (1)P1916-(3) | (1)W1916-(3) | |||||
|
Self Rimming and Fab Sink[4] |
|||||||
| (1)FDI(2)-(3)-(4)-(5)-(6) | (1)FNWNF-(7)-(8)-(9)-1-(6) | (1)SR(2)-(3)-(4)-(5)-(6) | (1)SRU(2)-(3)-(4)-(5)-(6) | ||||
|
Sinks[5] [6] |
|||||||
| 310-AA-B-CC-D-JJ | 312-AA-B-CC-D-JJ | 314-AA-B-CC-D-JJ | 412-AA-B-CC-D-JJ | ||||
| 414-AA-B-CC-D-JJ | BEVHHII-10BS-D | C314-10-3-12 | C314-16-3-18 | ||||
| C314-22-3-18 | C314-24-3-24 | FFN-EEFF-B-CCD-(G)-JJ | FN-EEFF-B-CCD-(G)-JJ | ||||
| HS-EE-FF | HSD-EE-FF | KK-EEFF-B-CC-G | PT-HHII-(D) | ||||
| SDT-D-CC-G-JJ | SDTC-D-CC-G-JJ | SDTCI-D-CC-G-JJ | SDTL-D-CC-G-JJ | ||||
| SDTP-D-CC-G-JJ | SFN-EEFF-B-CCD-(G)-JJ | SMPT-HHII | THHII | ||||
| UCB | UDT-IID-G-JJ | UOB | |||||
[2] (1) One or more of the following letters:
C - No faucet or drain is included
Y - Custom built
(2) Containing the following and may or may not be separated by dashes:
K - Optional skirt
P - Pedestal
S - Skirt
T - Waste receptacle and skirt
TWS - Tubular wall supports
WB - Wall brackets
(3) May or may not contain the following and may or may not be separated by dashes:
NF - No faucet holes
1F - Single faucet hole
1FE - Single faucet hole with sensor holes
FB - Alternate single facet hole
4F - Faucet holes on 4" centers
8F - Faucet holes on 8" centers
O - Overflow
L - 3 1/2" Drain hole
DS - Deck mount soap dispenser
SS - Splash mount soap dispenser
DP - Soap and towel dispenser
LS - Left splash
RS - Right splash
LRS - Left and right splash
NB - Nail brush
MG - Antimicrobial coating
AM - Compliance to American Made requirements
ADA - Compliance to Americans with Disabilities Act
EP - Electro polish
SD - Sound deadened
XXXXXXXX up to 8 alpha numeric characters representing custom faucet and drain
mounting options
(4) May or may not contain the following andMay or may not be separated by dashes:
EP - Electropolish
MG - Antimicrobial coating
O - Overflow
VSCS - Mop Storage cabinet
XXXXXXXX up to 8 alpha numeric characters representing custom faucet and drain
mounting options.
[3] Products are in compliance with applicable sections of ICC/ANSI A117.1-2003 Accessible
and Usable Buildings and Facilities. Installation is per manufacturer’s instructions and
ICC/ANSI A117.1.
[4] (1) One or more of the following letters:
C - No faucet or drain is included
Y - Custom built
(2) Bowl width in inches: 10 - 24
(3) Bowl length in inches: 10" - 24"
(4) Bowl depth in inches: 5" - 13.5"
(5) Number of bowls: 1 to 4
(6) May or may not contain the following and may or may not be separated by dashes:
NF - No faucet holes
4F - Faucet holes on 4" centers
8F - Faucet holes on 8" centers
O - Overflow
LS - Left splash
RS - Right splash
LRS - Left and right splash
MG - Antimicrobial coating
SD - Sound deadened
EP - Electro polish
TB - Twist brackets
XXXXXXX up to 8 alpha numeric characters representing custom faucet and drain
mounting options
(7) Bowl width in inches 8 to 36
(8) Bowl length in inches 8 to 36
(9) Bowl depth in inches 5 to 24
[5] AA - Length of bowl side-to-side with maximum length of 24"
B - Number of bowls with maximum of 4 bowls
CC - Length of drainboard side-to-side
D - R, L (position of drainboard)
EE - Bowl width with maximum width of 32"
FF - Length of all bowls side-to-side with maximum length of 30" for 1 bowl
G - Gauge/type (16/4, 16/3, 14/3)
HH - Width of table
II - Length of table
JJ - Optional SL (stainless legs), SLG (stainless legs and gussets), SLGF (stainless
legs, gussets and feet), CBG (galvanized cross bracing), CBS (stainless cross
bracing), AW (all welded), WB (welded base), DRS (double rack shelf), DSS (double
sorting shelf), NSB (no scrap block), SD (sound deadening)
KK - N, indicates sink is NSF Std 2 approved
[6] Custom units will always have a prefix of Y and an alpha numeric suffix of up to 12
characters. Custom units must be within the following parameters:
Bowl length: maximum of 24"
Bowl width: maximum of 32"
Number of bowls: maximum of 4
Gauge/Type: 16/4, 16/3, 14/3
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Sinks Certified without supply or waste fittings. |
|||||||
| Elkay Interior Systems Inc. | |
| 241 N Broadway | |
| Suite 600 | |
| Milwaukee, WI 53202 | |
| United States | |
| 414-847-0714 | |
| Visit this company's website |
Facility : Guangdong, China
| Product Type | Material Type | Trade Name | Product Standard | ||||
Sinks¢ § |
SS |
Elkay Interior Systems |
ASME A112.19.3/CSA B45.4 |
||||
| (1)(2)C(3)X(4)-(5)-(6)(10)[1] [2] | Custom Sink[1] [2] [3] [4] [5] [6] | DI-(8)-(3)(4)(9)[1] [5] | EHS-(2)[5] [7] | ||||
| ELV(5)(2)(3)(7)[5] [7] [8] | FLR-(7)[1] [2] | OSB216773X | RNSF8(1)(2)(3)(4)[3] [6] | ||||
| WCL(5)(2)(3)OSD(7)[5] [7] [8] | WMHS-1[2] [7] | WNSF8(1)(2)(3)(4)[2] [3] | |||||
[1] (1) Metal gauge and series: 14, B, E, S, SE, SL, or blank
(2) Number of compartments
(3) Interior dimension of sink bowl in inches, left to right
(4) Interior dimension of sink bowl in inches, front to back
(5) Drain board location: L, R, 2, 0
(6) Drain board length in inches
(7) Mop sink model: 1, 2, 3, 4
(8) Compartments: 1C, 2C, 3C, or blank
(9) Bowl depth in inches
(10) Corner: -L or blank
May or may not have suffix X.
[2] Welded sinks are within the following parameters:
Bowl length: 24 in
Bowl width: 24 in
Bowl depth: 14 in
Maximum number of bowls: 3
Gauge/Type: 14, 16, 18/202, 303, 304, or 430 SS
[3] (1) Number of sink compartments
(2) Length in inches
(3) Blank or any combination of the following: L, OF, R
(4) Number and configuration of faucet holes
May or may not have suffix X.
[4] Custom sinks are made either drawn or welded.
[5] Drawn sinks are within the following parameters:
Bowl length: 16 in
Bowl width: 14 in
Bowl depth: 10 in
Maximum number of bowls: 3
Gauge/Type: 18/202, 303, 304, or 430 SS
[6] Drawn sinks are within the following parameters:
Bowl length: 24 in
Bowl width: 24 in
Bowl depth: 12.75 in
Maximum number of bowls: 3
Gauge/Type: 16/202, 303, 304, or 430 SS
[7] (1) Mounting: B, P, or blank
(2) Length in inches
(3) Width in inches
(4) LRS or blank
(7) Number and configuration of faucet holes
Model may or may not have suffix X
[8] Products are in compliance with applicable sections of ICC/ANSI A117.1 Accessible and
Usable Buildings and Facilities. Installation is per manufacturer’s instructions and
ICC/ANSI A117.1. Products are Certified to ASME A112.19.3/CSA B45.5. Sinks are
Certified without supply or waste fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Facility : Atlacomulco, Estado de Mexico, Mexico
| Product Type | Material Type | Trade Name | Product Standard | ||||
Sinks¢ § |
SS |
Elkay Interior Systems |
ASME A112.19.3/CSA B45.4 |
||||
| (1)(2)C(3)X(4)-(5)-(6)(10)[1] [2] | Custom Sink[1] [2] [3] [4] [5] [6] | DI-(8)-(3)(4)(9)[1] [5] | EHS-(2)[5] [7] | ||||
| ELV(5)(2)(3)(7)[5] [7] [8] | FLR-(7)[1] [2] | RNSF8(1)(2)(3)(4)[3] [6] | WCL(5)(2)(3)OSD(7)[5] [7] [8] | ||||
| WMHS-1[2] [7] | WNSF8(1)(2)(3)(4)[2] [3] | ||||||
[1] (1) Metal gauge and series: 14, B, E, S, SE, SL, or blank
(2) Number of compartments
(3) Interior dimension of sink bowl in inches, left to right
(4) Interior dimension of sink bowl in inches, front to back
(5) Drain board location: L, R, 2, 0
(6) Drain board length in inches
(7) Mop sink model: 1, 2, 3, 4
(8) Compartments: 1C, 2C, 3C, or blank
(9) Bowl depth in inches
(10) Corner: -L or blank
May or may not have suffix X.
[2] Welded sinks are within the following parameters:
Bowl length: 24 in
Bowl width: 24 in
Bowl depth: 14 in
Maximum number of bowls: 3
Gauge/Type: 14, 16, 18/202, 303, 304, or 430 SS
[3] (1) Number of sink compartments
(2) Length in inches
(3) Blank or any combination of the following: L, OF, R
(4) Number and configuration of faucet holes
May or may not have suffix X.
[4] Custom sinks are made either drawn or welded.
[5] Drawn sinks are within the following parameters:
Bowl length: 16 in
Bowl width: 14 in
Bowl depth: 10 in
Maximum number of bowls: 3
Gauge/Type: 18/202, 303, 304, or 430 SS
[6] Drawn sinks are within the following parameters:
Bowl length: 24 in
Bowl width: 24 in
Bowl depth: 12.75 in
Maximum number of bowls: 3
Gauge/Type: 16/202, 303, 304, or 430 SS
[7] (1) Mounting: B, P, or blank
(2) Length in inches
(3) Width in inches
(4) LRS or blank
(7) Number and configuration of faucet holes
Model may or may not have suffix X
[8] Products are in compliance with applicable sections of ICC/ANSI A117.1 Accessible and
Usable Buildings and Facilities. Installation is per manufacturer’s instructions and
ICC/ANSI A117.1. Products are Certified to ASME A112.19.3/CSA B45.5. Sinks are
Certified without supply or waste fittings.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
| Franke Foodservice Solutions, Inc. | |
| 1 Franke Boulevard | |
| Fayetteville, TN 37334 | |
| United States | |
| 931-433-7455 | |
| Visit this company's website |
Facility : FP3
| Product Type | Material Type | Trade Name | Product Standard | ||||
Smoothie Rinser¢ |
SS |
Franke Food Service Systems, Inc. |
ASME A112.19.3/CSA B45.4 |
||||
| 18005632[3] | |||||||
[3] Product is Certified with a drain cup but without additional outlet adapter fittings. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
Stainless Steel Sinks¢ |
SS |
Franke Food Service Systems, Inc. |
ASME A112.19.3/CSA B45.4 |
||||
| 18000097[1] | 18001240[1] | 18001244[1] | 18001997[1] | ||||
| 18002356[1] | 18002377[1] | 18002756[2] | 18002879[2] | ||||
| 18003360[1] | 18003580[2] | 18004126[1] | 18004495¢ [1] [2] | ||||
| 18008341[1] | 18008342[1] | M12501[2] | M12705[2] | ||||
| M12767[2] | M1332[2] | M1333[2] | M1334[2] | ||||
| M2353[2] | M2378[2] | M2380[2] | M2383[2] | ||||
| M5672[2] | M9710[2] | M9711[2] | M9712[2] | ||||
| M9713[2] | M9717[2] | ||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Sinks Certified without supply or waste fittings, unless otherwise noted.
[2] Sinks are certified without supply fittings; Models are provided with drain assembly
D50-7210 or D50-7200.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
Facility : FP6
| Product Type | Material Type | Trade Name | Product Standard | ||||
Sinks¢ |
SS |
Franke Food Service Systems, Inc. |
A112.19.3/CSA B45.4 |
||||
| 18000097[1] | 18001240[1] | 18001244[1] | 18001997[1] | ||||
| 18002356[1] | 18002377[1] | 18002756[1] [2] | 18002879[1] [2] | ||||
| 18003360[1] | 18003580[1] [2] | 18004126[1] [2] | 18004495[1] [2] | ||||
| 18008341[1] | 18008342[1] | M12501[1] [2] | M12705[1] [2] | ||||
| M12767[1] [2] | M1332[1] [2] | M1333[1] [2] | M1334[2] | ||||
| M2353[1] [2] | M2378[1] [2] | M2380[1] [2] | M2383[1] [2] | ||||
| M5672[1] [2] | M9710[1] [2] | M9711[1] [2] | M9712[1] [2] | ||||
| M9713[1] [2] | M9717[1] [2] | ||||||
[1] Sinks are certified without supply or waste fittings unless otherwise noted. [2] Sinks are certified with waste fitting. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||||||
| Jay R. Smith Mfg. Co., Inc. | |
| 2781 Gunter Park Drive East | |
| Montgomery, AL 36109 | |
| United States | |
| 800-467-6484 | |
| 334-277-8520 | |
| Visit this company's website |
Facility : Montgomery, AL
| Product Type | Material Type | Trade Name | Product Standard | ||||
Floor Drains[1] |
SS |
General Purpose Floor Drain |
ASME A112.6.3 |
||||
| 9610X[3] | 9614X[2] | 9614X-S[2] | 9614X-SBG[2] | ||||
| 9615[2] | 9620X[4] | 9620X-S[4] | 9620X-SBG[2] | ||||
| 9621X[4] | 9621X-S[4] | 9621X-SBG[2] | 9622X[4] | ||||
| 9630X[4] | 9630X-S[4] | 9630X-SBG[2] | 9631X[4] | ||||
| 9631X-S[4] | 9631X-SBG[2] | 9632X[4] | 9632X-S[4] | ||||
| 9632X-SBG[2] | 9633X[4] | 9635X-S[4] | 9635X-SBG[2] | ||||
| 9636X-S[4] | 9636X-SBG[2] | 9637X-S[4] | 9637X-SBG[2] | ||||
| 9638X-S[4] | 9638X-SBG[2] | ||||||
[2] Load Classification of Medium Duty [3] Load Classification of Extra Heavy Duty [4] Load Classification of Light Duty [1] Options for X:
BW = Buttweld Outlet
T = Threaded Outlet
Y = No-hub Outlet
Optional Suffixes:
F = Anchor Flange
FC = Flange & Flashing Clamp
316 = Type 316 SS
B = Sediment Bucket
BT = Bell Trap & Bucket
P050 = 1/2" Trap Primer Connection
P075 = 3/4" Trap Primer Connection
Finger Hole in Center of Grate
DBS = Dome Bottom Strainer
SBP = Solid Ported Bucket
FBS = Flat Bottom Strainer
U = Vandal Proof
LSH = Less Seepage Holes
|
|||||||
Floor Drains[1] |
SS |
Floor, Area, And Indirect Waste Drains |
ASME A112.6.3 |
||||
| 9642X[6] | 9643X[6] | 9691X[5] | 9692X[5] | ||||
| 9693X[5] | 9694X[5] | 9696X[5] | 9697X[5] | ||||
| 9698X[5] | 9699X[5] | ||||||
[5] Optional Top Grates and Covers
-12 = With SS 1/2 Grate
-61 = With SS Heel-Proof Ribbed Non-Tilt Loose Set Grate with 1/4" Sq. Holes
-63 = With SS Medium Duty Heel=Proof Ribbed Non-Tilt Loose Set Greate with 1/4" Sq.
Holes
-66 = With SS Extra Heavy Duty Ribbed Non-Tilt Loose Set Grate with 1/2" Sq. Holes.
-69 = With 1" Thick underbolted NB Rim and Extra Heavy Duty Cast SS Secured Grate
[6] Load Classification of Heavy Duty
[1] Options for X:
BW = Buttweld Outlet
T = Threaded Outlet
Y = No-hub Outlet
Optional Suffixes:
F = Anchor Flange
FC = Flange & Flashing Clamp
316 = Type 316 SS
B = Sediment Bucket
BT = Bell Trap & Bucket
P050 = 1/2" Trap Primer Connection
P075 = 3/4" Trap Primer Connection
Finger Hole in Center of Grate
DBS = Dome Bottom Strainer
SBP = Solid Ported Bucket
FBS = Flat Bottom Strainer
U = Vandal Proof
LSH = Less Seepage Holes
|
|||||||
Floor Drains |
SS |
Adjustable Floor Drain |
ASME A112.6.3 |
||||
| 9600X-A05SS[6] | 9600X-A06SS[2] | 9600X-B05SS[9] | 9600X-B06SS[2] | ||||
[2] Load Classification of Medium Duty
[6] Load Classification of Heavy Duty
[9] CSA B79 Load Classification of Light Duty
ASME A112.6.3 Load Classification of Medium Duty
|
|||||||
Floor Drains |
SS |
Adjustable Floor Drain |
CSA B79 |
||||
| 9600X-A05SS[6] | 9600X-A06SS[2] | 9600X-B05SS[9] | 9600X-B06SS[2] | ||||
[2] Load Classification of Medium Duty
[6] Load Classification of Heavy Duty
[9] CSA B79 Load Classification of Light Duty
ASME A112.6.3 Load Classification of Medium Duty
|
|||||||
Floor Drains[1] [7] |
SS |
Special Floor Drain |
ASME A112.6.3 |
||||
| 9614X-RF | 9614X-SRF | 9620X-RF | 9620X-SRF | ||||
| 9621X-RF | 9621X-SRF | 9630X-RF | 9630X-SRF | ||||
| 9631X-RF | 9631X-SRF | 9632X-RF | 9632X-SRF | ||||
| 9635X-RF | 9635X-SRF | 9636X-RF | 9636X-SRF | ||||
| 9637X-RF | 9637X-SRF | 9638X-RF | 9638X-SRF | ||||
[1] Options for X:
BW = Buttweld Outlet
T = Threaded Outlet
Y = No-hub Outlet
Optional Suffixes:
F = Anchor Flange
FC = Flange & Flashing Clamp
316 = Type 316 SS
B = Sediment Bucket
BT = Bell Trap & Bucket
P050 = 1/2" Trap Primer Connection
P075 = 3/4" Trap Primer Connection
Finger Hole in Center of Grate
DBS = Dome Bottom Strainer
SBP = Solid Ported Bucket
FBS = Flat Bottom Strainer
U = Vandal Proof
LSH = Less Seepage Holes
[7] Load Classification of Special Duty
|
|||||||
Floor Drains[1] [7] |
SS |
Special Floor Drain |
CSA B79 |
||||
| 9635X-RF | 9635X-SRF | ||||||
[1] Options for X:
BW = Buttweld Outlet
T = Threaded Outlet
Y = No-hub Outlet
Optional Suffixes:
F = Anchor Flange
FC = Flange & Flashing Clamp
316 = Type 316 SS
B = Sediment Bucket
BT = Bell Trap & Bucket
P050 = 1/2" Trap Primer Connection
P075 = 3/4" Trap Primer Connection
Finger Hole in Center of Grate
DBS = Dome Bottom Strainer
SBP = Solid Ported Bucket
FBS = Flat Bottom Strainer
U = Vandal Proof
LSH = Less Seepage Holes
[7] Load Classification of Special Duty
|
|||||||
Floor Cleanout[6] [8] |
SS |
General Purpose Floor Cleanout |
ASME A112.6.3 |
||||
| 9646X | 9646X-S | ||||||
[6] Load Classification of Heavy Duty
[8] X:
BW = Buttweld Outlet
T = Threaded Outlet
Y = No-hub Outlet
Optional Suffixes:
F = Anchor Flange
FC = Flange & Flashing Clamp
XPSS = SS 304 Closure Plug
316 = Type 316 SS
|
|||||||
Floor Cleanout[6] [8] |
SS |
General Purpose Floor Cleanout |
CSA B79 |
||||
| 9646X | 9646X-S | ||||||
[6] Load Classification of Heavy Duty
[8] X:
BW = Buttweld Outlet
T = Threaded Outlet
Y = No-hub Outlet
Optional Suffixes:
F = Anchor Flange
FC = Flange & Flashing Clamp
XPSS = SS 304 Closure Plug
316 = Type 316 SS
|
|||||||
| Josam | |
| P.O. Box T | |
| Michigan City, IN 46361-0360 | |
| United States | |
| 866-395-6726 | |
| 219-827-5533 |
Facility : ATT Inox, Poland
| Product Type | Material Type | Trade Name | Product Standard | |||
Trench Drains |
SS |
Josam |
ASME A112.6.3 |
|||
| 46300 Series[1] | ||||||
|
46400 Series[1] |
||||||
|
46600 Series[1] |
||||||
|
46800 Series[1] |
||||||
[1] Part Number Nomenclature:
First two digits - Drain type
46 - Stainless steel trench drain
Third digit - Top size
3 - 6" Wide grate
4 – 8" Wide grate
6 – 12" Wide grate
8 – 16" Wide grate
Fourth digit - Grate type
1 – Reinforced perforated (light duty)
2 – Anti-slip mesh (medium duty)
3 – Solid w/ perimeter drainage (extra heavy duty)
4 – Ladder (heavy duty)
Fifth digit - Outlet size
3 – 3"
4 – 4"
6 – 6"
|
||||||
Commercial Floor Cleanouts |
SS |
Josam |
ASME A112.6.3 |
|||
| 41300 Series[2] [3] | ||||||
|
41400 Series[2] [3] |
||||||
|
41500 Series[2] [3] |
||||||
|
42300 Series[2] [3] |
||||||
|
42400 Series[2] [3] |
||||||
|
42500 Series[2] [3] |
||||||
[2] Part Number Nomenclature:
First two digits - Product type
41 - Non-adjustable square top
42 - Non-adjustable round top
Third digit - Top size
3 – 6" Top size
4 – 8" Top size
5 – 10" Top size
Fourth and fifth digits - Outlet size
03 – 3"
04 – 4"
06 – 6"
[3] Standard grate is smooth secure cover with gasket (heavy duty).
Other grate options:
DP – Diamond plate cover
|
||||||
Commercial Floor Drains |
SS |
Josam |
ASME A112.6.3 |
|||
| 41500 Series[4] [5] | ||||||
|
41600 Series[4] [5] |
||||||
|
41800 Series[4] [6] |
||||||
|
42400 Series[4] [7] |
||||||
|
42500 Series[4] [7] |
||||||
|
42600 Series[4] [5] |
||||||
|
43500 Series[4] [5] |
||||||
|
43600 Series[4] [5] |
||||||
|
43800 Series[4] [6] |
||||||
|
44500 Series[4] [7] |
||||||
[4] Part Number Nomenclature:
First two digits - Drain type
41 - Non-adjustable square top
42 - Non-adjustable round top
43 - Adjustable square top
44 - Adjustable round top
Third digit - Top size
3 - 6" Top size
4 - 8" Top size
5 - 10" Top size
6 - 12" Top size
8 - 16" Top size
Fourth digit - Outlet size
2 - 2"
3 - 3"
4 - 4"
6 - 6"
[5] Standard grate for 8", 10", and 12" square top drains and 12" round top drains is
perforated (medium duty). Other grate options:
3Q – 3/4 perforated grate (medium duty)
HG – 1/2 perforated grate (medium duty)
MG – Anti-slip mesh grate (medium duty)
LG – Ladder grate (heavy duty)
SG – Perimeter slot grate (extra heavy duty)
[4] Part Number Nomenclature:
First two digits - Drain type
41 - Non-adjustable square top
42 - Non-adjustable round top
43 - Adjustable square top
44 - Adjustable round top
Third digit - Top size
3 - 6" Top size
4 - 8" Top size
5 - 10" Top size
6 - 12" Top size
8 - 16" Top size
Fourth digit - Outlet size
2 - 2"
3 - 3"
4 - 4"
6 - 6"
[6] Standard grate for 16" square top drains is perforated (light duty). Other grate
options:
3Q – 3/4 perforated grate (light duty)
HG – 1/2 perforated grate (light duty)
MG – Anti-slip mesh grate (medium duty)
LG – Ladder grate (heavy duty)
SG – Perimeter slot grate (extra-heavy duty)
[4] Part Number Nomenclature:
First two digits - Drain type
41 - Non-adjustable square top
42 - Non-adjustable round top
43 - Adjustable square top
44 - Adjustable round top
Third digit - Top size
3 - 6" Top size
4 - 8" Top size
5 - 10" Top size
6 - 12" Top size
8 - 16" Top size
Fourth digit - Outlet size
2 - 2"
3 - 3"
4 - 4"
6 - 6"
[7] Standard grate for 8" and 10" round top drains is perforated (medium duty). Other grate
options:
3Q – 3/4 perforated grate (medium duty)
HG – 1/2 perforated grate (medium duty)
MG – Anti-slip mesh grate (medium duty)
LG – Ladder grate (heavy duty)
SG – Perimeter slot grate (extra-heavy duty)
SK – Sealing cover with key bolt (extra-heavy duty)
SV – Sealing cover with vacuum handle (extra-heavy duty)
|
||||||
Retrofit Liner |
SS |
Josam |
ASME A112.6.3 |
|||
| 45430 Series[8] [9] | ||||||
|
45600 Series[8] [9] |
||||||
|
45630 Series[8] [9] |
||||||
|
45650 Series[8] [9] |
||||||
|
45830 Series[8] [9] |
||||||
|
45860 Series[8] [9] |
||||||
[8] Part Number Nomenclature:
First two digits - Product type
45 – Stainless steel liner
Third digit - Top size
4 – 8" Top size
6 – 12" Top size
8 - 16" Top size
Fourth digit - Body depth
3 - 6" Depth
4 - 8" Depth
5 - 10" Depth
6 - 12" Depth
Fifth digit - Outlet size
2 - 2"
3 - 3"
4 - 4"
6 - 6"
[9] Standard grate is perforated (light duty). Other grate options:
3Q – 3/4 perforated grate (medium duty)
HG – 1/2 perforated grate (medium duty)
MG – Anti-slip mesh grate (medium duty)
LG – Ladder grate (heavy duty)
SG – Perimeter slot grate (extra heavy duty)
NG – No grate
|
||||||
| Krowne Metal Corporation | |
| 100 Haul Raod | |
| Wayne, NJ 07470 | |
| United States | |
| 800-631-0442 | |
| 973-305-3300 | |
| Visit this company's website |
Facility : Wayne, NJ
| Product Type | Material Type | Trade Name | Product Standard | ||||
Sinks |
SS |
Krowne Metal |
ASME A112.19.3/CSA B45.4 |
||||
| 16-153L | 18-12BD | 18-12BDL | 18-12BDR | ||||
| 18-12DST | 18-18BD | 18-18BDL | 18-18BDR | ||||
| 18-18ST | 18-1C | 18-31C | 18-32L | ||||
| 18-32R | 18-33 | 18-42C | 18-42L | ||||
| 18-42R | 18-43L | 18-43R | 18-53C | ||||
| 18-63C | 18-64C | 18-73C | 18-74C | ||||
| 18-83C | 18-84C | 18-GW2 | 18-W42L | ||||
| 18-W42L-7 | 18-W42R | 18-W42R-7 | 18-W48L | ||||
| 18-W48L-7 | 18-W48R | 18-W48R-7 | 18-W54L | ||||
| 18-W54L-7 | 18-W54R | 18-W54R-7 | 18-W66L | ||||
| 18-W66L-7 | 18-W66R | 18-W66R-7 | CS-1836 | ||||
| CS-1860 | CS-1872 | HS-1[1] | HS-10[1] | ||||
| HS-1016 | HS-1025 | HS-11[1] | HS-11-LF[1] | ||||
| HS-12[1] | HS-1220 | HS-1225 | HS-13[1] | ||||
| HS-1317 | HS-14[1] | HS-1419 | HS-1425 | ||||
| HS-15[1] | HS-1515 | HS-16[1] | HS-18[1] | ||||
| HS-18-LF[1] | HS-19[1] | HS-2-LF[1] | HS-2-LS[1] | ||||
| HS-2-RS[1] | HS-20-LF[1] | HS-2017 | HS-21[1] | ||||
| HS-22[1] | HS-23[1] | HS-26-LF[1] | HS-2619 | ||||
| HS-2619-LF | HS-26L[1] | HS-2L[1] | HS-30-LF[1] | ||||
| HS-30L[1] | HS-31[1] | HS-32[1] | HS-33[1] | ||||
| HS-34[1] | HS-35[1] [2] | HS-36[1] [2] | HS-37[1] | ||||
| HS-3819 | HS-3819-LF | HS-39[1] | HS-4[1] | ||||
| HS-40[1] | HS-41[1] | HS-42[1] | HS-43[1] | ||||
| HS-5[1] | HS-50[1] | HS-51[1] | HS-53[1] | ||||
| HS-56[1] | HS-58[1] | HS-61[1] | HS-62[1] | ||||
| HS-64[1] | HS-65[1] | HS-67[1] | HS-68[1] | ||||
| HS-69[1] | HS-7[1] | HS-70[1] | HS-8[1] | ||||
| HS-9-LF[1] | HS-9-LS[1] | HS-9-RS[1] | HS-9L[1] | ||||
| HS-9S-LF[1] | KR19-12DS | KR19-18ST | KR19-18ST-E | ||||
| KR19-18WST | KR19-1C | KR19-1C-E | KR19-22C | ||||
| KR19-31C | KR19-32L | KR19-32R | KR19-33C | ||||
| KR19-42C | KR19-42L | KR19-42R | KR19-43L | ||||
| KR19-43R | KR19-44C | KR19-53C | KR19-63C | ||||
| KR19-64C | KR19-73C | KR19-74C | KR19-83C | ||||
| KR19-84C | KR24-12BD | KR24-12DS | KR24-12ST | ||||
| KR24-12ST-E | KR24-14BD | KR24-18BD | KR24-18ST | ||||
| KR24-18ST-E | KR24-1C | KR24-1C-E | KR24-22C | ||||
| KR24-24SC | KR24-24SC-L | KR24-31C | KR24-32L | ||||
| KR24-32R | KR24-33C | KR24-42L | KR24-42R | ||||
| KR24-43L | KR24-43R | KR24-44C | KR24-53C | ||||
| KR24-63C | KR24-64C | KR24-73C | KR24-74C | ||||
| KR24-HX18 | KR24-HX18-E | KR24-MC12 | KR24-MC12-C | ||||
| KR24-MC18 | KR24-MC18-C | KR24-MC8 | KR24-MD12 | ||||
| KR24-MD12-C | KR24-MD18 | KR24-MD18-C | KR24-MD8 | ||||
| KR24-MS12 | KR24-MS12-C | KR24-MS14 | KR24-MS18 | ||||
| KR24-MS18-C | KR24-MS20 | KR24-MS20-C | KR24-MS24 | ||||
| KR24-MS24-C | KR24-MS8 | KR24-MX54 | KR24-MX54-7 | ||||
| KR24-MX60 | KR24-MX60-10 | KR24-MX68A | KR24-MX68A-10 | ||||
| KR24-MX68B-10 | KR24-MX70 | KR24-MX70-10 | KR24-MX84 | ||||
| KR24-MX84-10 | KR24-S12C | KR24-S18C | KR24-S18C-E | ||||
| KR24-SD12C | KR24-SD18C | KR24-W42L-10 | KR24-W42R-10 | ||||
| KR24-W48L-10 | KR24-W48R-10 | KR24-W54L-10 | KR24-W54R-10 | ||||
| KR24-W60A-10 | KR24-W60B-10 | KR24-W60C-10 | KR24-W60D-10 | ||||
| KR24-W60E-10 | KR24-W66A-10 | KR24-W66B-10 | KR24-W66C-10 | ||||
| KR24-W66D-10 | KR24-W66E-10 | KR24-W72A-10 | KR24-W72B-10 | ||||
| KR24-W72C-10 | KR24-W72D-10 | KR24-W72E-10 | KR24042C | ||||
| KR29-12BD | KR29-18BD | KRPT-36LP-10 | KRPT-36RP-10 | ||||
| KRPT-42LP-10 | KRPT-42RP-10 | KRPT-54ALP-10 | KRPT-54ARP-10 | ||||
| KRPT-54BLP-10 | KRPT-54BRP-10 | KRPT-60LP-10 | KRPT-60RP-10 | ||||
| MS-1818 | MS-2424 | WM200[1] | WM260[1] | ||||
| WM300[1] | WM900[1] | WS-1 | WS-2 | ||||
[1] Products are in compliance with applicable sections of ICC/ANSI A117.1 Accessible and
Usable Buildings and Facilities. Installation is per manufacturer’s instructions and
the latest version of ICC/ANSI A117.1.
[2] Certification does not cover the eyewash component(s).
|
|||||||
| Kusel Equipment | |
| 820 West Street | |
| Watertown, WI 53094 | |
| United States | |
| 920-261-4112 |
Facility : Watertown, WI
| Product Type | Material Type | Trade Name | Product Standard | |||
Cleanouts[1] [2] [3] |
SS |
KEC Series |
ASME A112.36.2/CSA B79.2 |
|||
[1] Products are either made from SS304 or SS316L stainless steel.
[2] All listed products from this facility are NSF Certified, whether or not they bear the
NSF mark.
[3] KEC Series *
ASME A112.36.2/CSA B79.2: Certified for outlet sizes 4” to 6” with a load classification
of special duty.
|
||||||
Floor Drains[1] [2] [4] |
SS |
KE Series |
ASME A112.6.3/CSA B79.3 |
|||
[1] Products are either made from SS304 or SS316L stainless steel.
[2] All listed products from this facility are NSF Certified, whether or not they bear the
NSF mark.
[4] KE Series #
ASME A112.6.3/CSA B79.3: Certified for outlet sizes 2” to 4” with a load classification
of special duty for Solid, Drilled, and Closing covers.
|
||||||
Floor Drains[1] [2] [5] |
SS |
KEM Series |
ASME A112.6.3/CSA B79.3 |
|||
[1] Products are either made from SS304 or SS316L stainless steel.
[2] All listed products from this facility are NSF Certified, whether or not they bear the
NSF mark.
[5] KEM Series %
ASME A112.6.3/CSA B79.3: Certified for outlet sizes 2” to 3” with a load classification
of medium duty.
|
||||||
| MAC Medical Inc. | |
| 820 South Mulberry Street | |
| Millstadt, IL 62260 | |
| United States | |
| 877-828-9975 | |
| 618-476-3550 | |
| Visit this company's website |
Facility : Millstadt, IL
| Product Type | Material Type | Trade Name | Product Standard | |||
Sinks§ [2] |
SS |
PS(XX)(YYY)(ZZ)(AH)-A-B-C-D-(E) |
ASME A112.19.3/CSA B45.4 |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[2] (XX) - Width of sink top
(YYY) - Length of sink top
(ZZ) - Height of sink - floor to sink top, not backsplash
(AH) - Adjustable height
A - Base configuration
(1) Standard tube base
(2) Standard tube base w/ wrap around apron
(3) Cabinet base
(4) Standard tube base w/ foot operated drain
(5) Wrap around apron w/ foot operated drain
(6) Cabinet base w/ foot operated drain
(7) Standard tube base w/ lever operated drain (H0142)
(8) Wrap around apron w/ lever operated drain
(9) Adjustable height w/ standard tube base and apron
(10) Adjustable height w/ standard tube base and lever operated drain
(11) Tube base with knee operated drain
(12) Wrap around apron with knee operated drain
(13) Adjustable height w/ wrap around base & knee operated drain
B - Side Splash
(1) None
(2) Left
(3) Right
(4) Both
(5) Overhead shelf w/ no side splash
(6) Overhead shelf w/ left side splash
(7) Overhead shelf w/ right side splash
(8) Overhead shelf w/ both side splash
C - Faucet Configuration
(1) None
(2) Standard gooseneck faucet configuration (H0192-04 or H0192-08)
(3) Pre-rinse/Gooseneck combination faucet
D - Workflow
(1) Standard L-R workflow, air gun only
(2) L-R workflow, treated water (DI) faucet and air gun
(3) Optional R-L workflow, air gun only
(4) R-L workflow, treated water (DI) faucet and air gun
(5) Standard L-R workflow, air/water gun only
(6) Standard L-R workflow, treated water (DI) faucet and upgraded air/water gun
(7) Optional R-L workflow, air/water gun only
(8) Optional R-L workflow, treated water (DI) faucet and upgrade air/water gun
(9) L-R workflow, air gun and upgraded air/water gun (H0201-01)
(10) R-L workflow, air gun and upgraded air/water gun (H0201-01)
(11) L-R workflow, treated water (DI) faucet, air gun, and upgraded air/water gun
(H0201-01)
(12) R-L workflow, treated water (DI) faucet, air gun, and upgraded air/water gun
(H0201-01)
(13) Optional R-L workflow, swivel treated water (DI) faucet
E - Customizable Options' under footnote
(1) Sonic Sink Bowl
SSL
SSC
SSR
(2) Increased backsplash height ('XX' indicates height in inches)
BSXX
EXX
(3) Increased side backsplash height ('X' indicates height in inches;
Z = L for left, R for right) ESXZ
|
||||||
Sinks§ [3] |
SS |
ES25(1)(2)(3)(4)(5)(6)(7)(8)(9) |
ASME A112.19.3/CSA B45.4 |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[3] (1) IR - Infrared operation
(2) MB - Manual bypass to add knee operated water and soap with IR operation
(3) KSP - knee operated soap (soap is not a standard feature with knee operated water
on es series sinks)
(4) FSP - Foot operated soap (all sinks)
(5) TM - Digital scrub timer
(6) EYE - Eye wash
(7) 220 - 220-240v
(8) PB - Pedestal base
(9) IRD - IR soap dispenser
|
||||||
Sinks§ [3] |
SS |
ES47(1)(2)(3)(4)(5)(6)(7)(8)(9) |
ASME A112.19.3/CSA B45.4 |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[3] (1) IR - Infrared operation
(2) MB - Manual bypass to add knee operated water and soap with IR operation
(3) KSP - knee operated soap (soap is not a standard feature with knee operated water
on es series sinks)
(4) FSP - Foot operated soap (all sinks)
(5) TM - Digital scrub timer
(6) EYE - Eye wash
(7) 220 - 220-240v
(8) PB - Pedestal base
(9) IRD - IR soap dispenser
|
||||||
Sinks§ [4] |
SS |
SS32(1)(2)(3)(4)(5)(6)(7)(8)(9) |
ASME A112.19.3/CSA B45.4 |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[4] (1) IR - Infrared Operation
(2) MB - Manual Bypass to add Knee Operated Water and Soap with IR Operation
(3) KSP - Knee Operated Soap with IR Operation
(4) FSP - Foot Operated Soap (All Sinks)
(5) TM - Digital Scrub Timer
(6) EYE - Eye Wash
(7) 220 - 220-240V
(8) PB - Pedestal Base
(9) IRD - IR soap dispenser
|
||||||
Sinks§ [4] |
SS |
SS64(1)(2)(3)(4)(5)(6)(7)(8)(9) |
ASME A112.19.3/CSA B45.4 |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[4] (1) IR - Infrared Operation
(2) MB - Manual Bypass to add Knee Operated Water and Soap with IR Operation
(3) KSP - Knee Operated Soap with IR Operation
(4) FSP - Foot Operated Soap (All Sinks)
(5) TM - Digital Scrub Timer
(6) EYE - Eye Wash
(7) 220 - 220-240V
(8) PB - Pedestal Base
(9) IRD - IR soap dispenser
|
||||||
Sinks§ [4] |
SS |
SS96(1)(2)(3)(4)(5)(6)(7)(8)(9) |
ASME A112.19.3/CSA B45.4 |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[4] (1) IR - Infrared Operation
(2) MB - Manual Bypass to add Knee Operated Water and Soap with IR Operation
(3) KSP - Knee Operated Soap with IR Operation
(4) FSP - Foot Operated Soap (All Sinks)
(5) TM - Digital Scrub Timer
(6) EYE - Eye Wash
(7) 220 - 220-240V
(8) PB - Pedestal Base
(9) IRD - IR soap dispenser
|
||||||
| Mifab, Inc. | |
| 1321 West 119th Street | |
| Chicago, IL 60643 | |
| United States | |
| 800-465-2736 | |
| 773-341-3030 |
Facility : Chicago, IL
| Product Type | Material Type | Trade Name | Product Standard | ||||
Commercial Floor Drains* § |
SS |
Mifab Manufacturing, Inc. |
ASME A112.6.3 |
||||
| P2060-LCB 6" x 6" Stainless Steel Fabricated Floor Drain[4] | P2080-LCB 8" x 8" Stainless Steel Fabricated Floor Drain[4] | P2120-LCB 12" x 12" Stainless Steel Fabricated Floor Drain[4] | P3060-LCB 6" Round Stainless Steel Fabricated Floor Drain[5] | ||||
| P3080-LCB 8" Round Stainless Steel Fabricated Floor Drain[4] | P3100-LCB 12" Round Stainless Steel Fabricated Floor Drain[4] | P3120-LCE 12" x 12" SS Floor Drain with Solid Cover and Perimeter Drainage[6] | P4080-LCB 8"x8" Stainless Steel Fabricated Floor Sink with Radiused Inside Sump[4] | ||||
| P4120-LCB 12"x12" Stainless Steel Fabricated Floor Sink w/Radiused Inside Sump[7] | P5001 Stainless Steel Kettle Drain 12" x 24"[7] | P5002 Stainless Steel Kettle Drain 12" x 30"[7] | P5003 Stainless Steel Kettle Drain 12" x 36"[7] | ||||
| P5004 Stainless Steel Kettle Drain 12" x 48"[7] | P6030-LCB 3" Wide Trench Drain, Stainless Steel Body and Grate System[1] | P6060-LCB 6" Wide Trench Drain, Stainless Steel Body and Grate System[2] | P6120-LCB 12" Wide Trench Drain, Stainless Steel Body and Grate System[3] | ||||
[1] Certified for a minimum length of 24" (with 2" maximum pipe outlet).
[2] Certified for the following minimum lengths:
12" (with 2" maximum pipe outlet)
24" (with 3" maximum pipe outlet)
36" (with 4" maximum pipe outlet)
[3] Certified for the following minimum lengths:
12" (with 3" maximum pipe outlet)
24" (with 4" maximum pipe outlet)
36" (with 6" maximum pipe outlet)
[4] Certified for a maximum pipe outlet of 4".
[5] Certified for a maximum pipe outlet of 3".
[6] Certified for a maximum pipe outlet of 2".
[7] Certified for a maximum pipe outlet of 6".
* All models tested and rated as Type A: Units with an external flow control, with air intake (vent): directly connected. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||||||
Commercial Floor Cleanouts§ [8] |
SS |
Mifab Manufacturing, Inc. |
ASME A112.36.2M |
||||
| P7040-LCD Stainless Steel Fabricated Cleanout 4" | P7060-LCD Stainless Steel Fabricated Cleanout 6" | ||||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [8] LCD - Load class D. Extra heavy duty grate. |
|||||||
| N. Wasserstrom & Sons, Inc. | |
| 2300 Lockbourne Road | |
| Columbus, OH 43207 | |
| United States | |
| 614-737-8537 |
Facility : Peoria, AZ
| Product Type | Material Type | Trade Name | Product Standard | ||||
Hand Sinks¢ [2] [3] [6] |
SS |
DCSIV |
ASME A112.19.3/CSA B45.4 |
||||
| cDH-17 | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] With suffix letter D, L, R or LL.
[3] Only products bearing the NSF Mark are Certified.
[6] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet B-0207
KL25 Valve Series
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
Sinks¢ [1] |
SS |
DCSIV |
ASME A112.19.3/CSA B45.4 |
||||
|
Century Sink with Drainboard[4] |
|||||||
| C-1-1618-18 | C-1-1618-24 | C-1-1818-18 | C-1-2424-18 | ||||
| C-1-2424-24 | C-1-3024-24 | C-2-1618-18 | C-2-1618-24 | ||||
| C-2-1824-18 | C-2-1824-24 | C-2-2030-20 | C-2-2424-18 | ||||
| C-2-2424-24 | C-2-2430-24 | C-3-1618-18 | C-3-1618-24 | ||||
| C-3-1624-18 | C-3-1824-18 | C-3-1824-24 | C-3-2030-20 | ||||
| C-3-2030-24 | C-3-2424-18 | C-3-2424-24 | C-3-2430-24 | ||||
| C-3-2430-30 | C-4-1618-16 | C-4-1824-18 | C-4-2030-20 | ||||
| C-4-2424-24 | |||||||
|
Century Sink without Drainboard |
|||||||
| C-1-1818 | C-1-2424 | C-1-3024 | C-2-1618 | ||||
| C-2-1824 | C-2-2030 | C-2-2424 | C-2-2430 | ||||
| C-3-1618 | C-3-1824 | C-3-2424 | C-3-2430 | ||||
| C-4-1618 | C-4-1824 | C-4-2424 | |||||
[4] With suffix letter D, L, or R. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000.
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet:
B-0207
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
Sinks¢ [1] |
SS |
N. Wasserstrom & Sons, Inc. |
ASME A112.19.3/CSA B45.4 |
||||
| Custom Sinks[5] | |||||||
[5] Custom Sinks are defined as a maximum 3-bowl fixture with the maximum dimensions of 26"
w x 29 3/4" d x 12" h per bowl.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000.
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet:
B-0207
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
Facility : Columbus, OH
| Product Type | Material Type | Trade Name | Product Standard | ||||
Hand Sinks¢ [2] [3] [6] |
SS |
Amtekco |
ASME A112.19.3/CSA B45.4 |
||||
| cDH-17 | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] With suffix letter D, L, R or LL.
[3] Only products bearing the NSF Mark are Certified.
[6] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet B-0207
KL25 Valve Series
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
Sinks¢ [1] |
SS |
Amtekco |
ASME A112.19.3/CSA B45.4 |
||||
|
Century Sink with Drainboard[4] |
|||||||
| C-1-1618-18 | C-1-1618-24 | C-1-1818-18 | C-1-2424-18 | ||||
| C-1-2424-24 | C-1-3024-24 | C-2-1618-18 | C-2-1618-24 | ||||
| C-2-1824-18 | C-2-1824-24 | C-2-2030-20 | C-2-2424-18 | ||||
| C-2-2424-24 | C-2-2430-24 | C-3-1618-18 | C-3-1618-24 | ||||
| C-3-1624-18 | C-3-1824-18 | C-3-1824-24 | C-3-2030-20 | ||||
| C-3-2030-24 | C-3-2424-18 | C-3-2424-24 | C-3-2430-24 | ||||
| C-3-2430-30 | C-4-1618-16 | C-4-1824-18 | C-4-2030-20 | ||||
| C-4-2424-24 | |||||||
|
Century Sink without Drainboard |
|||||||
| C-1-1818 | C-1-2424 | C-1-3024 | C-2-1618 | ||||
| C-2-1824 | C-2-2030 | C-2-2424 | C-2-2430 | ||||
| C-3-1618 | C-3-1824 | C-3-2424 | C-3-2430 | ||||
| C-4-1618 | C-4-1824 | C-4-2424 | |||||
[4] With suffix letter D, L, or R. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000.
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet:
B-0207
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
Sinks¢ [1] |
SS |
N. Wasserstrom & Sons, Inc. |
ASME A112.19.3/CSA B45.4 |
||||
| Custom Sinks[5] | |||||||
[5] Custom Sinks are defined as a maximum 3-bowl fixture with the maximum dimensions of 26"
w x 29 3/4" d x 12" h per bowl.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000.
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet:
B-0207
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
Facility : Fountain Inn, SC
| Product Type | Material Type | Trade Name | Product Standard | ||||
Hand Sinks¢ [2] [3] [6] |
SS |
GEN III |
ASME A112.19.3/CSA B45.4 |
||||
| cDH-17 | |||||||
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[2] With suffix letter D, L, R or LL.
[3] Only products bearing the NSF Mark are Certified.
[6] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet B-0207
KL25 Valve Series
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
Sinks¢ [1] |
SS |
GEN III |
ASME A112.19.3/CSA B45.4 |
||||
|
Century Sink with Drainboard[4] |
|||||||
| C-2-2030-20 | C-2-2424-18 | C-2-2424-24 | C-2-2430-24 | ||||
| C-3-1618-18 | C-3-1618-24 | C-3-1624-18 | C-3-1824-18 | ||||
| C-3-1824-24 | C-3-2030-20 | C-3-2030-24 | C-3-2424-18 | ||||
| C-3-2424-24 | C-3-2430-24 | C-3-2430-30 | C-4-1618-16 | ||||
| C-4-1824-18 | C-4-2030-20 | C-4-2424-24 | |||||
|
Century Sink without Drainboard |
|||||||
| C-1-1818 | C-1-2424 | C-1-3024 | C-2-1618 | ||||
| C-2-1824 | C-2-2030 | C-2-2424 | |||||
|
Century Sink with Drainboard[4] |
|||||||
| C-2-1824-24 | C-2-1824-18 | C-2-1618-24 | C-2-1618-18 | ||||
| C-1-3024-24 | C-1-2424-24 | C-1-2424-18 | C-1-1818-18 | ||||
| C-1-1618-24 | C-1-1618-18 | ||||||
|
Century Sink without Drainboard |
|||||||
| C-4-2424 | C-4-1824 | C-4-1618 | C-3-2430 | ||||
| C-3-2424 | C-3-1824 | C-2-2430 | C-3-1618 | ||||
[4] With suffix letter D, L, or R. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000.
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet:
B-0207
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
Sinks¢ [1] |
SS |
N. Wasserstrom & Sons, Inc. |
ASME A112.19.3/CSA B45.4 |
||||
| Custom Sinks[5] | |||||||
[5] Custom Sinks are defined as a maximum 3-bowl fixture with the maximum dimensions of 26"
w x 29 3/4" d x 12" h per bowl.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] Approved optional plumbing components provided with sinks:
Heavy-Duty Nickel Plated Solid Brass Rotary Drain:
DBN-8000 with or without optional Overflow Assembly E50-1000.
E18-1824
Twist Handle Waste Outlets:
D50-7100
D50-7200
D50-7110
D50-7210
Encore Wall Mount Faucets and Wall Mount Faucets with Swing Spouts:
KN54 Encore Series # *
Encore Deck Mount Faucets with Swing Spouts:
KN57 Encore Series # *
KN61 Encore Series # *
KN67 Encore Series # *
KN72 Encore Series # *
Single Pantry Faucet:
B-0207
# Does not include 6.0GPM aerator.
* Includes spouts up to 18” in length.
|
|||||||
| Tarrison Products Ltd. | |
| 2780 Coventry Road | |
| Oakville, ON L6H 6R1 | |
| Canada | |
| 905-825-9665 |
Facility : # 8 China
| Product Type | Material Type | Trade Name | Product Standard | ||||
Stainless Steel Sinks¢ [1] |
SS |
Tarrison Products |
ASME A112.19.3/CSA B45.4 |
||||
|
Bar Sink |
|||||||
| BS-210LR | BS-310LR | BS-410LR | |||||
|
Double Drop-in sink |
|||||||
| DI2-16147 | DI2-16148 | DI2-16198 | |||||
|
Double Drop-in Sink w/ Drain Board |
|||||||
| DI2-16148R21 | |||||||
|
Drop-in Sink |
|||||||
| DI-122012 | DI-141010 | DI-14105 | DI-16148 | ||||
| DI-162012 | DI-16208 | DI-181815 | DI-201612 | ||||
|
Hand Hygiene Sink (wall mount) |
|||||||
| HHS-1215 | HHS-1215BP | ||||||
|
Hand Sink (wall mount) |
|||||||
| HS-14 | HS-14-1 | ||||||
|
Hand Washing Sink |
|||||||
| HSF-14 | |||||||
|
Mop Sink |
|||||||
| MS-16206 | MS-20286 | ||||||
|
One Compartment Sink§ |
|||||||
| CDS1-18 | CDS1-18L | CDS1-18LR | CDS1-18R | ||||
| CDS1-24 | CDS1-24L | CDS1-24LR | CDS1-24R | ||||
| PS1-18 | PS1-18L | PS1-18LR | PS1-18R | ||||
| PS1-21 | PS1-21L | PS1-21LR | PS1-21R | ||||
| PS1-24 | PS1-2436 | PS1-24L | PS1-24LR | ||||
| PS1-24R | |||||||
|
Sink Bowl |
|||||||
| SB-1012106 | SB-1014106 | SB-1414146 | SB-1616146 | ||||
| SB-1620146 | SB-1724106 | SB-1818146 | SB-1824146 | ||||
| SB-2020146 | SB-2024146 | SB-2028186 | SB-2118146 | ||||
| SB-2424146 | |||||||
|
Soiled Dish Table |
|||||||
| SDT-108L | SDT-108R | SDT-120L | SDT-120R | ||||
| SDT-132L | SDT-132R | SDT-144L | SDT-144R | ||||
| SDT-36L | SDT-36R | SDT-48L | SDT-48R | ||||
| SDT-60L | SDT-60R | SDT-72L | SDT-72R | ||||
| SDT-84L | SDT-84R | SDT-96L | SDT-96R | ||||
|
Three Compartment Sink |
|||||||
| CDS3-18 | CDS3-18L | CDS3-18LR | CDS3-18R | ||||
| CDS3-24L | CDS324 | CSD3-24LR | CSD3-24R | ||||
| PS3-18 | PS3-18L | PS3-18LR | PS3-18R | ||||
| PS3-21 | PS3-21L | PS3-21LR | PS3-21R | ||||
| PS3-24 | PS3-24L | PS3-24LR | PS3-24R | ||||
|
Triple Drop-in Sink |
|||||||
| DI3-141610 | |||||||
|
Two Compartment Sink§ |
|||||||
| CDS2-18 | CDS2-18L | CDS2-18LR | CDS2-18R | ||||
| CDS2-24L | CDS2-24LR | CDS2-24R | CDS2-4 | ||||
| PS2-18 | PS2-18L | PS2-18LR | PS2-18R | ||||
| PS2-21 | PS2-21L | PS2-21LR | PS2-21R | ||||
| PS2-24 | PS2-24L | PS2-24LR | PS2-24R | ||||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Sinks Certified without supply or waste fittings. |
|||||||
| Victaulic | |
| 4901 Kesslersville Road | |
| Easton, PA 18040 | |
| United States | |
| 800-742-5842 | |
| 610-559-3300 | |
| Visit this company's website |
Facility : Easton, PA
| Product Type | Material Type | Trade Name | Product Standard | |||
Fittings |
SS |
Victaulic |
ASTM F1548 |
|||
|
45º Elbow[1] |
||||||
| No. 411 (2" - 12") | ||||||
|
90º Elbow[1] |
||||||
| No. 410 (2" - 12") | ||||||
|
Concentric Reducer[1] |
||||||
| No. 450 (2" x 1 1/2" - 12" x 10") | ||||||
|
End Cap[1] |
||||||
| No. 460 (2" - 12") | ||||||
|
Reducing Tee[1] |
||||||
| No. 425 (2" x 1 1/2" - 12" x 10") | ||||||
|
Tee[2] |
||||||
| No. 420 (2" - 12") | ||||||
[1] Products rated to 300 psi. [2] Products rated to 150 psi. |
||||||
Facility : Easton, PA
| Product Type | Material Type | Trade Name | Product Standard | |||
Fittings |
SS |
Victaulic |
ASTM F1548 |
|||
|
45º Elbow[1] |
||||||
| No. 411 (2" - 12") | ||||||
|
90º Elbow[1] |
||||||
| No. 410 (2" - 12") | ||||||
|
Concentric Reducer[1] |
||||||
| No. 450 (2" x 1 1/2" - 12" x 10") | ||||||
|
End Cap[1] |
||||||
| No. 460 (2" - 12") | ||||||
|
Reducing Tee[1] |
||||||
| No. 425 (2" x 1 1/2" - 12" x 10") | ||||||
|
Tee[2] |
||||||
| No. 420 (2" - 12") | ||||||
[1] Products rated to 300 psi. [2] Products rated to 150 psi. |
||||||
| Zurn Water, LLC | |
| 1801 Pittsburgh Avenue | |
| Erie, PA 16502 | |
| United States | |
| 814-875-1376 | |
| Visit this company's website |
Facility : Caddo Mills, TX
| Product Type | Material Type | Trade Name | Product Standard | |||
Cleanouts§ |
SS |
Cleanout Cover |
ASME A112.36.2/CSAB79.2 |
|||
| 1/2" thick cover (7 3/4" x 7 3/4")# | ||||||
# Certified for 3" and 4" outlet sizes with a load classification of Extra Heavy Duty. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Commercial Floor Drains* § |
SS |
Z1805 Series |
ASME A112.6.3 |
|||
| [A]1805-12B-[C]-[D]-[E] | ||||||
| 12" Diameter Round Sanitary Floor Drain | ||||||
| [A]1805-12S-[C]-[D]-[E] | ||||||
| 12" Square Sanitary Floor Drain | ||||||
* Product Nomenclature:
[A] - Stainless Steel Type
Z - Type 304 Stainless Steel
ZM - Type 316 Stainless Steel
[C] - Outlet Size and Type
3NH - 3" No-Hub
4NH - 4" No-Hub
6NH - 6" No-Hub
3BW - 3" Butt-Weld
4BW - 4" Butt-Weld
6BW - 6" Butt-Weld
[D] - Grate/Cover Options
-H3 (with 3" outlets only) - Special Duty Perimeter Gap Grate
-H5 - Extra Heavy Duty Slotted Grate
-H9 (with 3" and 4" outlets only) - Medium Duty Perforated Grate
[E] - Miscellaneous Options
-K - Anchor Flange
-KC - Anchor Flange with Seepage Holes & Clamp Collar
-MG - EZ Lock Magnetic System with Secured Secondary Strainer
-P - 3/4 Trap Primer Connection
-VP - Vandal Proof Secured Top
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
|
||||||
Commercial Floor Drains* ¢ § |
SS |
Z1805 Series |
CSA B79 |
|||
| [A]1805-12B-[C]-[D]-[E] | ||||||
| 12" Diameter Round Sanitary Floor Drain | ||||||
| [A]1805-12S-[C]-[D]-[E] | ||||||
| 12" Square Sanitary Floor Drain | ||||||
* Product Nomenclature:
[A] - Stainless Steel Type
Z - Type 304 Stainless Steel
ZM - Type 316 Stainless Steel
[C] - Outlet Size and Type
3NH - 3" No-Hub
4NH - 4" No-Hub
6NH - 6" No-Hub
3BW - 3" Butt-Weld
4BW - 4" Butt-Weld
6BW - 6" Butt-Weld
[D] - Grate/Cover Options
-H3 (with 3" outlets only) - Special Duty Perimeter Gap Grate
-H5 - Extra Heavy Duty Slotted Grate
-H9 (with 3" and 4" outlets only) - Medium Duty Perforated Grate
[E] - Miscellaneous Options
-K - Anchor Flange
-KC - Anchor Flange with Seepage Holes & Clamp Collar
-MG - EZ Lock Magnetic System with Secured Secondary Strainer
-P - 3/4 Trap Primer Connection
-VP - Vandal Proof Secured Top
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
|
||||||
Floor Drains§ |
SS |
Food Service Drains |
ASME A112.6.3/CSAB79.3 |
|||
| 1/4" Slotted 10" diameter% | ||||||
|
1/2" Slotted 10" diameter# |
||||||
|
10 Gauge Perforated 10" diameter& |
||||||
% Certified for 3" and 4" outlet sizes with a load classification of Heavy Duty. # Certified for 3" and 4" outlet sizes with a load classification of Extra Heavy Duty. & Certified for 3" and 4" outlet sizes with a load classification of Light Duty. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
||||||
Number of matching Manufacturers is 33
Number of matching Products is 2208
Processing time was 1 seconds
