NSF Product and Service Listings

NSF Product and Service Listings

Did you know?

Connect with NSF

These NSF Official Listings are current as of Saturday, April 4, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?PlantState=TX&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Advanced Drainage Systems, Inc.
4640 Trueman Boulevard
Hilliard, OH 43026
United States
800-733-7473
614-658-0050
Visit this company's website

Facility : Ennis, TX

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2239
3/4" - 2" SIDR 5.3
3/4" - 2" SIDR 7
3/4" - 2" SIDR 9
1/2" - 2" SIDR 11.5*
1/2" - 2" SIDR 15*
1/2" - 2" SIDR 19*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 3608/4710	ADS PolyFlex	ASTM D2737
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
1/2" - 2" SDR 11*
* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	ADS PolyFlex 4710	AWWA C901
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Atkore HDPE Pipe & Conduit
4707 East Kearney Street
Springfield, MO 65803
United States
417-708-9887
Visit this company's website

Facility : Dallas, TX

Electrical Conduit and Accessories

Product Type	Material Type	Trade Name	Product Standard
Electrical Conduit	HDPE	ATKORE / HERITAGE PLASTICS*	UL 651A
1", 1 1/4", 1 1/2", 2", 2 1/2" Coiled Sch 40
3", 3 1/2", 4", 5", 6" Coiled Sch 40
1", 1 1/4", 1 1/2", 2", 2 1/2" Coiled Sch 80
3", 3 1/2", 4", 5", 6" Coiled Sch 80
1", 1 1/4", 1 1/2", 2", 2 1/2" Coiled EPEC-11
3", 4", 5", 6" Coiled EPEC-11
1 1/4", 1 1/2", 2", 2 1/2" Coiled EPEC-13.5
3", 4", 5", 6" Coiled EPEC-13.5
* Included in trade name is: ALLIED TUBE & CONDUIT / UNITED POLY SYSTEMS

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	Base-Line	FM 1613
2" - 6" IPS DR 7 (335 PC)
2" - 6" IPS DR 7.3 (320 PC)[1]
2" - 6" IPS DR 9 (250 PC)
2" - 6" IPS DR 11 (200 PC)
2" - 6" DIPS DR 7 (335 PC)
2" - 6" DIPS DR 7.3 (320 PC) [1]
2" - 6" DIPS DR 9 (250 PC)
2" - 6" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Crystal-Line	FM 1613
2" - 6" IPS DR 7 (335 PC)
2" - 6" IPS DR 7.3 (320 PC)[1]
2" - 6" IPS DR 9 (250 PC)
2" - 6" IPS DR 11 (200 PC)
2" - 6" DIPS DR 7 (335 PC)
2" - 6" DIPS DR 7.3 (320 PC) [1]
2" - 6" DIPS DR 9 (250 PC)
2" - 6" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	Water-Line	FM 1613
2" - 6" IPS DR 7 (335 PC)
2" - 6" IPS DR 7.3 (320 PC)[1]
2" - 6" IPS DR 9 (250 PC)
2" - 6" IPS DR 11 (200 PC)
2" - 6" DIPS DR 7 (335 PC)
2" - 6" DIPS DR 7.3 (320 PC) [1]
2" - 6" DIPS DR 9 (250 PC)
2" - 6" DIPS DR 11 (200 PC)
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Base-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	ASTM D3035
1/2" IPS DR 7[1]
3/4" - 3" IPS DR 7
1/2" IPS DR 9[1]
3/4" - 3" IPS DR 9
1/2" - 3" IPS DR 11[1]
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	ASTM F714
4" - 6" IPS DR 7
4" - 6" IPS DR 7.3
4" - 6" IPS DR 9
4" - 6" IPS DR 11
4" - 6" IPS DR 13.5
4" - 6" IPS DR 15.5[2]
4" - 6" IPS DR 17
4" - 6" IPS DR 19[2]
4" - 6" IPS DR 21
4" - 6" IPS DR 26
4" - 6" IPS DR 32.5
4" - 6" DIPS DR 7
4" - 6" DIPS DR 7.3[2]
4" - 6" DIPS DR 9
4" - 6" DIPS DR 11
4" - 6" DIPS DR 13.5
4" - 6" DIPS DR 15.5[2]
4" - 6" DIPS DR 17
4" - 6" DIPS DR 19[2]
4" - 6" DIPS DR 21
4" - 6" DIPS DR 26[2]
4" - 6" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	ASTM F714
4" - 6" IPS DR 7
4" - 6" IPS DR 7.3
4" - 6" IPS DR 9
4" - 6" IPS DR 11
4" - 6" IPS DR 13.5
4" - 6" IPS DR 15.5[2]
4" - 6" IPS DR 17
4" - 6" IPS DR 19[2]
4" - 6" IPS DR 21
4" - 6" IPS DR 26
4" - 6" IPS DR 32.5
4" - 6" DIPS DR 7
4" - 6" DIPS DR 7.3[2]
4" - 6" DIPS DR 9
4" - 6" DIPS DR 11
4" - 6" DIPS DR 13.5
4" - 6" DIPS DR 15.5[2]
4" - 6" DIPS DR 17
4" - 6" DIPS DR 19[2]
4" - 6" DIPS DR 21
4" - 6" DIPS DR 26[2]
4" - 6" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	ASTM F714
4" - 6" IPS DR 7
4" - 6" IPS DR 7.3
4" - 6" IPS DR 9
4" - 6" IPS DR 11
4" - 6" IPS DR 13.5
4" - 6" IPS DR 15.5[2]
4" - 6" IPS DR 17
4" - 6" IPS DR 19[2]
4" - 6" IPS DR 21
4" - 6" IPS DR 26
4" - 6" IPS DR 32.5
4" - 6" DIPS DR 7
4" - 6" DIPS DR 7.3[2]
4" - 6" DIPS DR 9
4" - 6" DIPS DR 11
4" - 6" DIPS DR 13.5
4" - 6" DIPS DR 15.5[2]
4" - 6" DIPS DR 17
4" - 6" DIPS DR 19[2]
4" - 6" DIPS DR 21
4" - 6" DIPS DR 26[2]
4" - 6" DIPS DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	AWWA C901
3/4" - 3" IPS SDR 9
3/4" - 2" CTS SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Base-Line	AWWA C906
4" - 6" IPS DR 7
4" - 6" IPS DR 7.3[2]
4" - 6" IPS DR 9
4" - 6" IPS DR 11
4" - 6" IPS DR 13.5
4" - 6" IPS DR 15.5[2]
4" - 6" IPS DR 17
4" - 6" IPS DR 19[2]
4" - 6" IPS DR 21
4" - 6" IPS DR 26[2]
4" - 6" IPS DR 32.5[2]
4" - 6" DIOD DR 7
4" - 6" DIOD DR 7.3[2]
4" - 6" DIOD DR 9
4" - 6" DIOD DR 11
4" - 6" DIOD DR 13.5
4" - 6" DIOD DR 15.5[2]
4" - 6" DIOD DR 17
4" - 6" DIOD DR 19[2]
4" - 6" DIOD DR 21
4" - 6" DIOD DR 26[2]
4" - 6" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Water-Line	AWWA C906
4" - 6" IPS DR 7
4" - 6" IPS DR 7.3[2]
4" - 6" IPS DR 9
4" - 6" IPS DR 11
4" - 6" IPS DR 13.5
4" - 6" IPS DR 15.5[2]
4" - 6" IPS DR 17
4" - 6" IPS DR 19[2]
4" - 6" IPS DR 21
4" - 6" IPS DR 26[2]
4" - 6" IPS DR 32.5[2]
4" - 6" DIOD DR 7
4" - 6" DIOD DR 7.3[2]
4" - 6" DIOD DR 11
4" - 6" DIOD DR 9
4" - 6" DIOD DR 13.5
4" - 6" DIOD DR 15.5[2]
4" - 6" DIOD DR 17
4" - 6" DIOD DR 19[2]
4" - 6" DIOD DR 21
4" - 6" DIOD DR 26[2]
4" - 6" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Crystal-Line	AWWA C906
4" - 6" IPS DR 7
4" - 6" IPS DR 7.3[2]
4" - 6" IPS DR 9
4" - 6" IPS DR 11
4" - 6" IPS DR 13.5
4" - 6" IPS DR 15.5[2]
4" - 6" IPS DR 17
4" - 6" IPS DR 19[2]
4" - 6" IPS DR 21
4" - 6" IPS DR 26[2]
4" - 6" IPS DR 32.5[2]
4" - 6" DIOD DR 7
4" - 6" DIOD DR 7.3[2]
4" - 6" DIOD DR 9
4" - 6" DIOD DR 11
4" - 6" DIOD DR 13.5
4" - 6" DIOD DR 15.5[2]
4" - 6" DIOD DR 17
4" - 6" DIOD DR 19[2]
4" - 6" DIOD DR 21
4" - 6" DIOD DR 26[2]
4" - 6" DIOD DR 32.5[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Lovelady, TX

Electrical Conduit and Accessories

Product Type	Material Type	Trade Name	Product Standard
Electrical Conduit	HDPE	ATKORE / HERITAGE PLASTICS*	UL 651A
1", 1 1/4", 1 1/2", 2", 2 1/2" Coiled Sch 40
3", 3½", 4", 5", 6" Coiled Sch 40
1", 1 1/4", 1 1/2", 2", 2 ½" Coiled Sch 80
3", 3½", 4", 5", 6" Coiled Sch 80
1", 1 ¼", 1 1/2", 2", 2 ½" Coiled EPEC-11
3", 4", 5", 6" Coiled EPEC-11
1 1/4", 1 1/2", 2", 2 1/2" Coiled EPEC-13.5
3", 4", 5", 6" Coiled EPEC-13.5
* Included in trade name is: ALLIED TUBE & CONDUIT / UNITED POLY SYSTEMS
Electrical Conduit	HDPE	ATKORE/HERTIAGE PLASTICS*	NEMA TC-7
1", 1 ¼", 1 ½", 2", 2 ½" Coilable EPEC-11
3", 4", 5", 6" Coilable EPEC-11
1 ¼", 1 ½", 2", 2 ½" Coilable EPEC-13.5
3", 4", 5", 6" Coilable EPEC-13.5
1", 1 ¼", 1 ½", 2", 2 ½" Coilable EPEC-40
3", 4", 5", 6" Coilable EPEC-40
1", 1 ¼", 1 ½", 2", 2 ½" Coilable EPEC-80
3", 4", 5", 6" Coilable EPEC-80
* Included in trade name is: ALLIED TUBE & CONDUIT / UNITED POLY SYSTEMS

Atkore Plastic Pipe Corporation
16100 South Lanthrop Avenue
Harvey, IL 60426
United States
708-225-2075

Facility : Dallas, TX

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	Heritage Plastics	ASTM D2665
1 1/4" - 12" Sch 40
* Sockets and gasketed bell ends are not tested or listed by NSF for this production

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVC	Heritage Plastics	UL 1285
4" DR 14, 18, 25
6" DR 14, 18, 25
8" DR 14, 18, 25
10" DR 14, 18, 25
12" DR 14, 18, 25
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVC	Heritage Plastics	AWWA C900
4" DR 14, 18, 25
6" DR 14, 18, 25
8" DR 14, 18, 25
10" DR 14, 18, 25
12" DR 14, 18, 25
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	Heritage Plastics	ASTM D1785
1/2" - 12" Sch 40
1/2" - 12" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	Heritage Plastics	ASTM D2241
1/2" - 6" SDR 13.5
3/4" - 12" SDR 17
3/4" - 12" SDR 21
1" - 12" SDR 26
2 1/2" - 12" SDR 32.5
3" - 12" SDR 41
4" - 12" SDR 64
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVC	Heritage Plastics	AWWA C900
4" DR 14, 18, 25
6" DR 14, 18, 25
8" DR 14, 18, 25
10" DR 14, 18, 25
12" DR 14, 18, 25
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PVC	Heritage Plastics	AWWA C900
4" DR 14, 18, 25
6" DR 14, 18, 25
8" DR 14, 18, 25
10" DR 14, 18, 25
12" DR 14, 18, 25
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Aurora Material Solutions
9280 Jefferson Street
Streetsboro, OH 44241
United States
330-422-0700
Visit this company's website

Facility : Pasadena, TX

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC	2	AP4006ADGR1031	ASTM D1784 12454
PVC	2	AP4006ADWH2012	ASTM D1784 12454
PVC	2	AP4006AGGR1031	ASTM D1784 12454
PVC	2	AP4006AGWH2012	ASTM D1784 12454
PVC	2	AP4006ALBK1010	ASTM D4396 11432
PVC¢	2	AP4006ALBK1010	CSA B182.1 12454
PVC	2	AP4006ALBK1010	ASTM D1784 12454
PVC¢	2	AP4006ALBK1010	CSA B182.2 12454
PVC	2	AP4006ALGR1031	ASTM D4396 11432
PVC¢	2	AP4006ALGR1031	CSA B182.2 12454
PVC	2	AP4006ALGR1031	ASTM D1784 12454
PVC¢	2	AP4006ALGR1126	CSA B181.1 12454
PVC¢	2	AP4006ALGR1126	CSA B181.2 12454
PVC	2	AP4006ALGR1126	ASTM D4396 11432
PVC	2	AP4006ALGR1126	ASTM D1784 12454
PVC¢	2	AP4006ALGR1127	CSA B181.2 12454
PVC¢	2	AP4006ALGR1127	CSA B182.1 12454
PVC	2	AP4006ALGR1127	ASTM D1784 12454
PVC	2	AP4006ALGR1127	ASTM D4396 11432
PVC	2	AP4006ALGR1128	ASTM D1784 12454
PVC	2	AP4006ALGR1128	ASTM D4396 11432
PVC¢	2	AP4006ALGR1128	CSA B182.1 12454
PVC¢	2	AP4006ALGR1128	CSA B181.2 12454
PVC¢	2	AP4006ALGR1129	CSA B181.2 12454
PVC	2	AP4006ALGR1129	ASTM D1784 12454
PVC	2	AP4006ALGR1129	ASTM D4396 11432
PVC¢	2	AP4006ALGR1129	CSA B182.1 12454
PVC¢	2	AP4006ALWH2012	CSA B182.1 12454
PVC	2	AP4006ALWH2012	ASTM D1784 12454
PVC¢	2	AP4006ALWH2012	CSA B181.2 12454
PVC¢	2	AP4006ALWH2012	CSA B182.2 12454
PVC¢	2	AP4006CCGN1031	CSA B182.1 12454
PVC¢	2	AP4006CCGN1031	CSA B182.2 12454
PVC	2	AP4006CCGN1031	ASTM D1784 12454
PVC	2	AP4006CCGN1031	ASTM D4396 11432
PVC¢	2	AP4006CCGR1031	CSA B182.1 12454
PVC	2	AP4006CCGR1031	ASTM D1784 12454
PVC	2	AP4006CCGR1031	ASTM D4396 11432
PVC¢	2	AP4006CCGR1031	CSA B182.2 12454
PVC	2	AP4006CCGR1031	ASTM D1784 12454
PVC	2	AP4006CCGR1031	ASTM D4396 11432
PVC¢	2	AP4006CCGR1031	CSA B182.1 12454
PVC¢	2	AP4006CCWH2012	CSA B182.1 12454
PVC¢	2	AP4006CCWH2012	CSA B181.2 12454
PVC	2	AP4006CCWH2012	ASTM D1784 12454
PVC¢	2	AP4006CCWH2068	CSA B181.1 12454
PVC¢	2	AP4006CCWH2068	CSA B181.2 12454
PVC	2	AP4006CCWH2068	ASTM D1784 12454
PVC	2	AP4006CCWH2068	ASTM D439611432
PVC¢	2	AP4006DJGR1117	CSA B182.2 12454
PVC	2	AP4006DJGR1117	ASTM D1784 12454
PVC	2	AP4006DJGR1117	ASTM D4396 11432
PVC¢	2	AP4006DJGR1117	CSA B182.1 12454
PVC	2	AP4006DJWH2043	ASTM D1784 12454
PVC¢	2	AP4006DJWH2043	CSA B182.1 12454
PVC	2	AP4006DJWH2043	ASTM D4396 11432
PVC¢	2	AP4006DJWH2043	CSA B181.2 12454
PVC	2	AP4006DJWH2055	ASTM D4396 11432
PVC¢	2	AP4006DJWH2055	CSA B181.2 12454
PVC¢	2	AP4006DJWH2055	CSA B181.1 12454
PVC	2	AP4006DJWH2055	ASTM D1784 12454
PVC	2	AP4006DLWH2043	ASTM D1784 13343
PVC	2	AP4006DNGN1031	ASTM D1784 13343
PVC	2	AP4006DNWH2043	ASTM D1784 13343
PVC	2	AP4006RGR1031	ASTM D1784 12454
PVC	2	AP4006RWH2012	ASTM D1784 12454
PVC¢	2	AP4008AGR1031	CSA B182.2 12454
PVC¢	2	AP4008AGR1031	CSA B182.1 12454
PVC	2	AP4008AGR1031	ASTM D4396 11432
PVC¢	2	AP4008AWH1172	CSA B182.2 12454
PVC¢	2	AP4008AWH1172	CSA B182.1 12454
PVC	2	AP4008AWH1172	ASTM D4396 11432
PVC¢	2	AP4008EWH1172	ASTM D4396 11432
PVC¢	2	AP4008EWH1172	CSA B182.1 12454
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC	1	AP2465ANT1001	ASTM D1784 12454
PVC	1	AP2465BNT1001	ASTM D1784 12454
PVC+	2	AP4006ADGR1031	ASTM D1784 12454
PVC+	2	AP4006ADWH2012	ASTM D1784 12454
PVC+	2	AP4006AGGR1031	ASTM D1784 12454
PVC+	2	AP4006AGWH2012	ASTM D1784 12454
PVC+	2	AP4006ALBK1010	ASTM D1784 12454
PVC+	2	AP4006ALGR1031	ASTM D1784 12454
PVC	2	AP4006ALGR1126	ASTM D1784 12454
PVC	2	AP4006ALGR1126	ASTM D4396 11432
PVC+ ¢	2	AP4006ALGR1126	CSA B182.1 12454
PVC+ ¢	2	AP4006ALGR1126	CSA B181.2 12454
PVC+	2	AP4006ALGR1127	ASTM D4396 11432
PVC+ ¢	2	AP4006ALGR1127	CSA B181.2 12454
PVC+ ¢	2	AP4006ALGR1127	CSA B182.1 12454
PVC+	2	AP4006ALGR1127	ASTM D1784 12454
PVC+ ¢	2	AP4006ALGR1128	CSA B182.1 12454
PVC+	2	AP4006ALGR1128	ASTM D4396 11432
PVC+ ¢	2	AP4006ALGR1128	CSA B181.2 12454
PVC+	2	AP4006ALGR1128	ASTM D1784 12454
PVC+ ¢	2	AP4006ALGR1129	CSA B181.2 12454
PVC+	2	AP4006ALGR1129	ASTM D1784 12454
PVC+	2	AP4006ALGR1129	ASTM D4396 11432
PVC+ ¢	2	AP4006ALGR1129	CSA B182.1 12454
PVC+	2	AP4006ALWH2012	ASTM D1784 12454
PVC+	2	AP4006CCGR1031	ASTM D1784 12454
PVC+	2	AP4006CCWH2012	ASTM D1784 12454
PVC+	2	AP4006CCWH2068	ASTM D4396 11432
PVC+ ¢	2	AP4006CCWH2068	CSA B181.1 12454
PVC+	2	AP4006CCWH2068	ASTM D1784 12454
PVC+ ¢	2	AP4006CCWH2068	CSA B181.2 12454
PVC+ ¢	2	AP4006DJGR1117	CSA B182.2 12454
PVC+	2	AP4006DJGR1117	ASTM D1784 12454
PVC+ ¢	2	AP4006DJGR1117	CSA B182.1 12454
PVC+	2	AP4006DJGR1117	ASTM D4396 11432
PVC+	2	AP4006DJWH2043	ASTM D1784 12454
PVC+	2	AP4006DJWH2055	ASTM D1784 12454
PVC+	2	AP4006RGR1031	ASTM D1784 12454
PVC+	2	AP4006RWH2012	ASTM D1784 12454
PVC+	2	AP4008AGR1031	ASTM D1784 12454
PVC+	2	AP4008AWH1172	ASTM D1784 12454
PVC+	2	AP4008EWH1172	ASTM D1784 12454
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Baystar - Bayport Polymers LLC
12212 Port Road
Pasadena, TX 77507
United States
281-474-6000
Visit this company's website

Facility : Pasadena, TX

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710^ ++	3	HDPE 4920B	ASTM D3350 445574C
PE 4710^ ++	3	HDPE 4920N	ASTM D3350 445574A
PE 4710^ ++	3	HDPE 4920N/BLK	ASTM D3350 445574C
^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Charlotte Pipe & Foundry Company
Plastics Division
4210 Old Charlotte Highway
P.O. Box 1339
Monroe, NC 28111-1339
United States
704-291-3218
Visit this company's website

Facility : Cameron, TX

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe §*	PVC	Charlotte Pipe®***	ASTM D2665
1 1/4" - 12" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. *** These pipe products may include the production location code PLTX in the trade name.
Pipe§	PVC	Charlotte Pipe®***	ASTM F891
1 1/2" - 12" Sch 40
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. *** These pipe products may include the production location code PLTX in the trade name.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe § [G]*	PVC	Charlotte Pipe®***	ASTM D1785
1/2" - 8" Sch 80
1/2" - 12" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. *** These pipe products may include the production location code PLTX in the trade name. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe § [G]*	PVC	Charlotte Pipe®***	ASTM D2241
1/2" SDR 13.5
3/4" - 2" SDR 21
1" - 6" SDR 26
2 1/2" - 12" SDR 32.5
4" - 12" SDR 41
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. *** These pipe products may include the production location code PLTX in the trade name. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Well Casings

Product Type	Material Type	Trade Name	Product Standard
Well Casings+ [G]	PVC	Charlotte Pipe®***	ASTM F480
2" - 12" Sch 40
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. *** These pipe products may include the production location code PLTX in the trade name. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Chevron Phillips Chemical Company, LP
9500 Lakeside Blvd.
The Woodlands, TX 77381
United States
832-813-4100
Visit this company's website

Facility : Pasadena, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708* ¢	3	Marlex® TR-418P8D	ASTM D2513 234373E
PE 80* ¢	3	Marlex® TR-418P8D	ASTM D2513 234375E
PE 2708* ¢	3	Marlex® TR-418P8D	CSA B137.4 234373E
PE 80* ¢	3	Marlex® TR-418P8D	CSA B137.4 234375E
PE 2708* ¢	3	Marlex® TR-418Q YL1	ASTM D2513 234373E
PE 2708* ¢	3	Marlex® TR-418Q YL1	CSA B137.4 234373E
PE 2708* ¢	3	Marlex® TR-418Q YL2	ASTM D2513 234373E
PE 80* ¢	3	Marlex® TR-418Q YL2	ASTM D2513 234375E
PE 2708* ¢	3	Marlex® TR-418Q YL2	CSA B137.4 234373E
PE 80* ¢	3	Marlex® TR-418Q YL2	CSA B137.4 234373E
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Facility : Sweeny, TX

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710	3	Marlex® H516HP BK	ASTM D3350 445574C
PE 4710	3	Marlex® TRB-432 BK	ASTM D3350 445574C
PE 4710	3	Marlex® TRB-437LS BK	ASTM D3350 445574C
PE 100	3	Marlex® TRB-437LS BK	ASTM D3350 445576C
PE 4710	3	Marlex® TRB-437LS G1	ASTM D3350 445574C
PE 100	3	Marlex® TRB-437LS G1	ASTM D3350 445576C
PE 4710	3	Marlex® TRB-437LS NT	ASTM D3350 445574A
PE 100	3	Marlex® TRB-437LS NT	ASTM D3350 445576A

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710* ¢	3	Marlex® H516HP BK	ASTM D2513 445574C
PE 4710* ¢	3	Marlex® H516HP BK	CSA B137.4 445574C
PE 4710* ¢	3	Marlex® TRB-432 BK	ASTM D2513 445574C
PE 4710* ¢	3	Marlex® TRB-432 BK	CSA B137.4 445574C
PE 4710* ¢	3	Marlex® TRB-432YL1	ASTM D2513 445574E
PE 4710* ¢	3	Marlex® TRB-432YL1	CSA B137.4 445574E
PE 4710* ¢	3	Marlex® TRB-432YL2	ASTM D2513 445574E
PE 4710* ¢	3	Marlex® TRB-432YL2	CSA B137.4 445574E
PE 100* ¢	3	Marlex® TRB-432YL2	CSA B137.4 445576E
PE 4710* ¢	3	Marlex® TRB-437LS BK	ASTM D2513 445574C
PE 4710* ¢	3	Marlex® TRB-437LS BK	CSA B137.4 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710$ + ^ ¢	3	Marlex® H516HP BK	ASTM D3350 445574C
PE 4710$ + ^ ¢	3	Marlex® H516HP BK	CSA B137.1 445574C
PE 4710$ + ^ ¢	3	Marlex® TRB-432 BK	ASTM D3350 445574C
PE 4710$ + ^ ¢	3	Marlex® TRB-432 BK	CSA B137.1 445574C
PE 4710$ + ^ ¢	3	Marlex® TRB-432YL1	ASTM D3350 445574E
PE 4710$ + ^ ¢	3	Marlex® TRB-432YL1	CSA B137.1 445574E
PE 4710$ + ^ ¢	3	Marlex® TRB-432YL1	ASTM D3350 445576E
PE 4710$ + ^ ¢	3	Marlex® TRB-437LS BK	ASTM D3350 445574C
PE 4710$ + ^ ¢	3	Marlex® TRB-437LS BK	CSA B137.1 445574C
PE 100$ + ^ ¢	3	Marlex® TRB-437LS BK	ASTM D3350 445576C
PE 4710$ & + ¢	3	Marlex® TRB-437LS G1	ASTM D3350 445574C
PE 4710$ & + ¢	3	Marlex® TRB-437LS G1	CSA B137.1 445574C
PE 4710$ & + ¢	3	Marlex® TRB-437LS G1	ASTM D3350 445576C
PE 4710$ + ^ ¢	3	Marlex® TRB-437LS NT	ASTM D3350 445574A
PE 4710$ + ^ ¢	3	Marlex® TRB-437LS NT	ASTM D3350 445576A
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. & Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Cresline Plastic Pipe Co., Inc.
600 Cross Pointe Boulevard
Evansville, IN 47715
United States
270-826-8317

Facility : Corsicana, TX

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	Cresline® PVC DWV	ASTM D2665
1 1/4" - 8" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility.
Pipe*	PVC		ASTM D2665
1 1/4" - 8" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility.
Pipe	PVC	Cresline®	ASTM F891
1 1/2" - 8"

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [G]*	PVC	Cresline® PVC	ASTM D1785
1/2" - 8" Sch 40
1/2" - 8" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC		ASTM D1785
1/2" - 8" Sch 40
1/2" - 8" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	Cresline® PVC	ASTM D2241
1/2" - 6" SDR 13.5
1/2" - 8" SDR 21
1/2" - 8" SDR 26
5" SDR 17
6" SDR 32.5
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC		ASTM D2241
1/2" - 6" SDR 13.5
1/2" - 8" SDR 21
1/2" - 8" SDR 26
5" SDR 17
6" SDR 32.5
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Well Casings

Product Type	Material Type	Trade Name	Product Standard
Well Casings[G]	PVC	Cresline®	ASTM F480
2" - 8" Sch 40
4 1/2" DR 20
4 1/2" - 6" SDR 17
4" - 8" SDR 26
4" - 8" SDR 21
6" SDR 32.5
6" SDR 32.5
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Diamond Plastics Corporation
1212 Johnstown Road
Grand Island, NE 68803
United States
308-384-4400

Facility : Lubbock, TX

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PVC	DPC Pipe/ Diamond/ Diamond Lok-21	FM 1612
PC 250: 4", 6", 8", 10", 12" DR 14
PC 185: 4", 6", 8", 10", 12" DR 18
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PVC	DPC Pipe/ Diamond	UL 1285
PC 165: 4",6",8",10",12",14",16",18",20",24"
PC 165: 30", 36"
PC 235: 4", 6", 8", 10", 12", 14", 16", 18", 20"
PC 235: 24", 30", 36"
PC 305: 4",6",8",10",12",14",16",18",20"
PC 305: 24", 30", 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Dover Chemical Corporation
3676 Davis Road
Dover, OH 44622
United States
800-321-0104
330-364-0104

Facility : Fort Worth, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Calcium Stearate[1]	DOVERLUBE-CA20	2.5
Calcium Stearate+ [1]	DOVERLUBE-CA21	2.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] When used in the PPI PVC Range Composition, the allowable use level is 0.4 – 1.5 phr.

Dow Chemical Company (The)
Regulatory Compliance
1803 Building
Midland, MI 48674
United States
979-238-5209
Visit this company's website

Facility : North Seadrift, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710*	3	CONTINUUM™ DGDA-2490 Black	ASTM D3350 445574C
PE 100*	3	CONTINUUM™ DGDA-2490 Black	ASTM D3350 445574C
PE 4710*	3	CONTINUUM™ DGDC-2490 BK	ASTM D3350 445574C
PE 4710*	3	CONTINUUM™ DGDC-2490 BK	ASTM D2513 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710* + ^^	3	CONTINUUM™ DGDA-2490 Black	ASTM D3350 445574C
PE 100* + ^^	3	CONTINUUM™ DGDA-2490 Black	ASTM D3350 445576C
PE 3608* + ^	3	CONTINUUM™ DGDB-2480 Black	ASTM D3350 345464C
PE 3608* + ^	3	CONTINUUM™ DGDB-2480 NT	ASTM D3350 345464A
PE 4710* + ^ ^^	3	CONTINUUM™ DGDC-2490 BK	ASTM D3350 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. ^^ Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263.

Equistar Chemicals, LP, a wholly-owned subsidiary of LyondellBasell
Polymers Division
1221 McKinney Street, Suite 1600
P.O. Box 2583
Houston, TX 77252-2583
United States
713-652-7200
Visit this company's website

Facility : Bay City, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710# *	3	Alathon® L4904 Black	ASTM D2513 445574C
PE 4710# * ¢	3	Alathon® L4904 Black	CSA B137.4 445574C
PE 4710# *	3	Alathon® L4904 Black	ASTM D3350 445574C
PE 4710 PLUS# * ¢	3	Alathon® L4904 Black	CSA B137.4 445584C
PE 100# * ¢	3	Alathon® L4904 Black	CSA B137.4 445586C
PE 100# *	3	Alathon® L4904 Black	ASTM D3350 445586C
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. * Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100# + ^^^	3	Alathon L4904LSC- Black	ASTM D3350 445576C
PE 4710# + ¢ ^^^	3	Alathon L4904LSC- Black	CSA B137.1 445574C
PE 4710# + ¢ ^^^	3	Alathon L4904LSC- Black	ASTM D3350 445574C
PE 4710# + ^^^	3	Alathon® L4904-Black	ASTM D3350 445574C
PE 4710# + ^ ¢	3	Alathon® L4904-Black	CSA B137.1 445574C
PE 100# + ^	3	Alathon® L4904-Black	ASTM D3350 445576C
PE 100# + ^^^	3	Alathon® L4904-Black	ASTM D3350 445576C
PE 4710# + ¢ ^^^	3	Alathon® L4904-Black	CSA B137.1 445574C
PE 4710# + ^	3	Alathon® L4904-Black	ASTM D3350 445574C
PE 4710# + ^^^	3	Alathon® L4904LS-Black	ASTM D3350 445574C
PE 4710# + ¢ ^^^	3	Alathon® L4904LS-Black	CSA B137.1 445574C
PE 4710# + ^	3	Alathon® L4904LS-Black	ASTM D3350 445574C
PE 100# + ^^^	3	Alathon® L4904LS-Black	ASTM D3350 445576C
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC0 (unspecified) per Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ^^^ Material has a chlorine resistance rating of CC3 per Table 2 of ASTM D3350.

^^ Material has a chlorine resistance rating of CC1 per Table 2 of ASTM D3350.
^^^^ Material has a chlorine resistance rating of CC2 per Table 2 of ASTM D3350

Facility : La Porte, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100* ¢	3	Hyperzone HY4008 Black	CSA B137.4 445586C
PE 4710 PLUS* ¢	3	Hyperzone HY4008 Black	CSA B137.4 445584C
PE 4710 PLUS*	3	Hyperzone HY4008 Black	ASTM D2513 445584C
PE 4710 PLUS*	3	Hyperzone HY4008 Black	ASTM D3350 445584C
PE 100*	3	Hyperzone HY4008 Black	ASTM D3350 445586C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100# * + ^	3	Hyperzone HY4008 Black	ASTM D3350 445576C
PE 4710# * + ^	3	Hyperzone HY4008 Black	CSA B137.1 445574C
PE 4710# * + ^	3	Hyperzone HY4008 Black	ASTM D3350 445574C
PE 100# * + ^	3	HYPERZONE HY4008LSC Black	ASTM D3350 445576C
PE 4710# * + ^	3	HYPERZONE HY4008LSC-Black	ASTM D3350 445574C
PE 4710# * + ^	3	HYPERZONE HY4008LSC-Black	CSA B137.1 445574C
PE 100# * + ^	3	Hyperzone HY4008 Blue	ASTM D3350 445576C
PE 4710# * + ^	3	Hyperzone HY4008 Blue	CSA B137.1 445574C
PE 4710# * + ^	3	Hyperzone HY4008 Blue	ASTM D3350 445574C
# Trade designation on Certificate of Analysis will be preceded by a 4 to 6 digit packaging code designation. * Material has a chlorine resistance rating of CC3 per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Product is authorized to bear the cNSF and or/ the CNSFus Mark.

ExxonMobil Product Solutions Company
22777 Springwoods Village Parkway
Spring, TX 77389
United States
832-624-9114

Facility : Mont Belvieu, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710*	1	ExxonMobil HD4966HL BK	ASTM D2513 445574C
PE 4710*	1	ExxonMobil HD4966HL BK	ASTM D3350 445574C
* Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization

Potable Water - Materials

Material Type

End Use

Trade Name

Product Standard

PE 4710+ ^ [1]

ExxonMobil HD4966HL BK

ASTM D3350 445574C

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
^ Meets the chlorine resistance requirements of CC0 (unspecified) per Table 2 of ASTM
  D3350  when tested in accordance with ASTM F2263
[1] Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350.

Faci USA, Inc.
1912 Kurth Drive
Lufkin, TX 75904
United States
936-634-8884
Visit this company's website

Facility : Lufkin, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Calcium Stearate+	Calcium Stearate DW	1.5
Calcium Stearate+	Calcium Stearate S	1.5
Calcium Stearate+	Calcium Stearate S HD	1.5
Calcium Stearate+	Calcium Stearate SP	1.5
Calcium Stearate+	Calcium Stearate WLC	1.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Formosa Plastics Corporation, Texas
201 Formosa Drive
P.O. Box 700
Point Comfort, TX 77978
United States
361-987-7960

Facility : Point Comfort, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
PVC Resin+ [1] [2]	Formolon 622	100
PVC Resin+ [1] [2]	Formolon 622S	100
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified to NSF/ANSI 14 and also approved in Table 1 of the PPI PVC Range Composition. Approved for a use range of 100 phr. [2] Use of this ingredient in NSF Certified products requires prior authorization from NSF, unless user is an authorized holder of the PPI PVC Range Composition.

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC	1, 5	FORMOLON AW02	ASTM D1784 12454
PVC	1, 5	FORMOLON AW04	ASTM D1784 12454
PVC	1, 5	FORMOLON AW05	ASTM D1784 12454
PVC	1, 5	FORMOLON AW13	ASTM D1784 12454
PVC	1, 5	FORMOLON-550	ASTM D1784 12454

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE4710	1	E6210C BLK	ASTM D3350 445574 C
PE4710	1	E6210C BLK	ASTM D2513 445574 C
PE4710	1	E6210C BLK2	ASTM D3350 445574 C
PE4710	1	E6210C BLK2	ASTM D2513 445574 C
PE4710	1	E6210F2 BLK	ASTM D2513 445574 C
PE4710	1	E6210F2 BLK	ASTM D3350 445574 C
PE 2708[1]	1	HP3902 YL2	ASTM D2513 237373 E
PE 2708[1]	1	HP3902 YL2	ASTM D3350 237373 E
PE 2708[1]	1	HP3902/PO2240	ASTM D3350 237373 E
PE 2708[1]	1	HP3902/PO2240	ASTM D2513 237373 E
PE 2708[1]	1	HP3902 YL	ASTM D3350 237373 E
PE 2708[1]	1	HP3902 YL	ASTM D2513 237373 E
[1] Flexural modulus is 95,000 - 125,000 psi.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710¢ ++	1	DE6210A	CSA B137.1 445574C
PE 100# ++	1	DE6210A	ASTM D3350 445576C
PE 4710# ++	1	DE6210A	ASTM D3350 445574C
PE 100# ++	1	DE6210A/E6210A	ASTM D3350 445576C
PE 4710# ++	1	DE6210A/E6210A	ASTM D3350 445574C
PE 4710¢ ++	1	DE6210A/E6210A	CSA B137.1 445574C
PE 4710# ++	1	E6210A	ASTM D3350 445574C
PE 4710# ++	1	E6210A	ASTM D3350 445576C
PE 4710¢ ++	1	E6210A	CSA B137.1 445574C
PE 4710¢ ++	1	E6210A-MD53542	CSA B137.1 445574C
PE 4710# ++	1	E6210A-MD53542	ASTM D3350 445574C
PE 100# ++	1	E6210A-MD53542	ASTM D3350 445576C
PE 4710# ++	1	E6210A-PO2107	ASTM D3350 445574C
PE 4710¢ ++	1	E6210A-PO2107	CSA B137.1 445574C
PE 100# ++	1	E6210A-PO2107	ASTM D3350 445576C
PE 4710## ++		E6210C	ASTM D3350 445574C
PE 4710¢ ++		E6210C	CSA B137.1 445574C
PE 4710¢ ++	1	E6210C BLK	CSA B137.1 445574C
PE 4710## ++	1	E6210C BLK	ASTM D3350 445574C
PE 4710## ++		E6210C BLK2	ASTM D3350 445574C
PE 4710¢ ++		E6210C BLK2	CSA B137.1 445574C
PE 4710++ ###	1	E6210F2 BLK	ASTM D3350 445574C
PE 4710¢ ++	1	E6210F2 BLK	CSA B137.1 445574C
PE 4710++ ###	1	E6210F2 BLK2	ASTM D3350 445574C
PE4710¢ ++	1	E6210F2 BLK2	CSA B137.1 445574C
PE 4710¢ ++	1	E6210F2/MD53542	CSA B137.1 445574C
PE 4710++ ###	1	E6210F2/MD53542	ASTM D3350 445574C
PVC* +	1	FORMOLON AW02	ASTM D1784 12454
PVC* +	1	FORMOLON AW04	ASTM D1784 12454
PVC* +	1	FORMOLON AW05	ASTM D1784 12454
PVC* +	1	FORMOLON AW13	ASTM D1784 12454
PVC* +	1	FORMOLON-550	ASTM D1784 12454
PE 4710# ++	1	Formolene DE6210A	ASTM D3350 445574C
PE 4710¢ ++	1	Formolene DE6210A	CSA B137.1 445574C
PE 100# ++	1	Formolene DE6210A	ASTM D3350 445576C
PE 4710¢ ++	1	Formolene DE6210A/E6210A	CSA B137.1 445574C
PE 4710# ++	1	Formolene DE6210A/E6210A	ASTM D3350 445574C
PE 100# ++	1	Formolene DE6210A/E6210A	ASTM D3350 445576C
PE 100# ++	1	Formolene E6210A	ASTM D3350 445576C
PE 4710# ++	1	Formolene E6210A	ASTM D3350 445574C
PE 4710¢ ++	1	Formolene E6210A	CSA B137.1 445574C
PE 3608& + ^ ¢	1	Formolene HP4401	ASTM D3350 345464C
PE 3608& + ^ ¢	1	HP4401/AS4642	ASTM D3350 345464C
PE 3608& + ^ ¢	1	HP4401/AS4692	ASTM D3350 345464C
PE 3608& + ^ ¢	1	HP4401/MDPE-535-42	ASTM D3350 345464C
# Meets the chlorine resistance requirements of CC1 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. & Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. * Meets the material requirements of CSA B137.3 + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the material requirements of CSA B137.1 ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. ## Meets the chlorine resistance requirements of CC2 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). ### Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263.

Geon Performance Solutions
Avon Lake General Chemical
33587 Walker Road
Avon Lake, OH 44012
United States
440-930-1000
Visit this company's website

Facility : Pasadena, TX

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC* + [1]	2	210A Black 2999 (HS)	ASTM D1784 12454
PVC* + [1]	2	210A Gray 2709 (HS)	ASTM D1784 12454
PVC* + [1]	2, 4	E1210 HR White 1271	ASTM D1784 12454
PVC* +	1	E1353 White 1278	ASTM D1784 12454
PVC* +	1	E1354 White 1278	ASTM D1784 12454
PVC* +	2	E1355 White 1278	ASTM D1784 12454
PVC+	1	E1356 DK Gray 2594	ASTM D1784 12454
PVC* +	1	E1356 Gray 2198	ASTM D1784 12454
PVC* +	1	E1356 Gray 2747	ASTM D1784 12454
PVC* +	1	E1356 Natural 0000	ASTM D1784 12454
PVC+	1	E1356 White 1119	ASTM D1784 12454
PVC* +	1	E1356 White 1278	ASTM D1784 12454
PVC* +	2	E1357 White 1278	ASTM D1784 12454
CPVC* +++	1	EC900 Tan 3189	ASTM D1784 24448
CPVC* +++	1	EC920 Tan 3189	ASTM D1784 24448
CPVC* +++	1	EC950 Gray 2777	ASTM D1784 23447
PVC* + [1]	2, 4	GEON 210 GRAY 2700 (HR)	ASTM D1784 12454
PVC* + [1]	2, 4	GEON 210 WHITE 1271 (HR)	ASTM D1784 12454
PVC* + [1]	2, 4	GEON 210A WHITE 1271 (HS)	ASTM D1784 12454
PVC* + [1]	2, 4	GEON M1010 GRAY 2463	ASTM D1784 12454
PVC* + [1]	2, 4	GEON M1010 WHITE 1235	ASTM D1784 12454
PVC* + [1]	2, 4	GEON M1015 WHITE 1235	ASTM D1784 12454
PVC* + [1]	2, 4	M1000 White 1114	ASTM D1784 12454
PVC* + [1]	2, 4	M1000 White 1708	ASTM D1784 12454
PVC* + [1]	2	M1010 White 1799	ASTM D1784 12454
PVC* + [1]	2	M1400 Black 2984	ASTM D1784 12454
PVC* + [1]	2	M1400 DK Gray 2907	ASTM D1784 12454
PVC* + [1]	2	M1400 LT Gray 2197	ASTM D1784 12454
PVC* + [1]	2, 4	M1400 White 1271	ASTM D1784 12454
PVC* + [1]	2	M1400 White 1805	ASTM D1784 12454
* Material designation may or may not include the designation "Geon". Trade designation of product may or may not be followed by either a PL or CU: PL - Pellet CU - Cube + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] Fitting and appurtenance end use not to exceed 250 sq. in./L.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Facility : Seabrook, TX

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC*	5, 8	210 Gray 2700 (HR)	ASTM D1784 12454
PVC*	5, 8	210 Orange 7295 (HR)	ASTM D1784 12454
PVC*	5, 8	210 White 1271 (HG)	ASTM D1784 12454
PVC*	5, 8	210 White 1271 (HR)	ASTM D1784 12454
PVC*	5, 8	210 White 1271 (HS)	ASTM D1784 12454
PVC*	5, 8	210 White 1494	ASTM D1784 12454
PVC*	5, 8	210 White 271	ASTM D1784 12454
PVC*	2	210A Black 2999 (HS)	ASTM D4396 11432
PVC*	2	210A Gray 2709 (HS)	ASTM D4396 11432
PVC*	5, 8	210A White 1271 (HS)	ASTM D1784 12454
PVC*	5, 8	210A White 1279	ASTM D1784 12454
PVC*	2	GEON M1010 GRAY 2463	ASTM D1784 12454
PVC*	2	GEON M1010 WHITE 1235	ASTM D1784 12454
PVC*	2	Geon M1130 Gray 2751	ASTM D1784 12454
PVC*	2	Geon M1150 Dark Gray 2751	ASTM D1784 12454
PVC*	2	Geon M1150 White 1663	ASTM D1784 12454
PVC*	2	M1000 Black 2880	ASTM D4396 11432
PVC*	2	M1000 Gray 2700	ASTM D4396 11432
PVC*	2	M1000 White 1114	ASTM D1784 12454
PVC*	2	M1000 White 1240	ASTM D4396 11432
PVC*	2, 4	M1000 White 1708	ASTM D1784 12454
PVC*	2	M1010 White 1799	ASTM D1784 12454
PVC*	2	M1015 Gray 2132	ASTM D1784 12454
PVC*	2	M1015 Gray 2709	ASTM D1784 12454
PVC*	2	M1018 White 1424	ASTM D1784 12454
PVC* ¢	2	M1210 Gray 2306	CSA B181.2
PVC* ¢	2	M1210 Gray 2306	CSA B79
PVC* ¢	2	M1210 Gray 2306	CSA B181.2
PVC* ¢	2	M1210 Gray 2700	CSA B79
PVC* ¢	2	M1210 Gray 2700	CSA B181.2
PVC*	2	M1400 Black 2984	ASTM D1784 12454
PVC*	2	M1400 DK Gray 2907	ASTM D1784 12454
PVC*	2	M1400 LT Gray 2197	ASTM D1784 12454
PVC*	2	M1400 White 1805	ASTM D1784 12454
PVC*	2	M3000 Black 2880	ASTM D4396 11432
PVC*	2	M3000 Gray 2700	ASTM D4396 11432
PVC*	2	M3000 White 1240	ASTM D4396 11432
* Material designation may or may not include the designation "Geon". Trade designation of product may or may not be followed by either a PL or CU: PL - Pellet CU - Cube ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC* + [1]	2, 4	210 Gray 2700 (HR)	ASTM D1784 12454
PVC* + [1]	2, 4	210 Orange 7295 (HR)	ASTM D1784 12454
PVC* + [1]	2, 4	210 White 1271 (HR)	ASTM D1784 12454
PVC* + [1]	2, 4	210 White 1271 (HS)	ASTM D1784 12454
PVC* + [1]	2, 4	210 White 1494	ASTM D1784 12454
PVC* + [1]	2, 4	210 White 271	ASTM D1784 12454
PVC* + [1]	2	210A Black 2999 (HS)	ASTM D1784 12454
PVC* + [1]	2, 4	210A Gray 172	ASTM D1784 12454
PVC* + [1]	2	210A Gray 2709 (HS)	ASTM D1784 12454
PVC* + [1]	2, 4	210A White 1271 (HS)	ASTM D1784 12454
PVC* + [1]	2, 4	210A White 1279	ASTM D1784 12454
PVC* + [1]	2, 4	87322 Gray 260	ASTM D1784 14333
PVC* + [1]	2, 4	E1210 HR White 1271	ASTM D1784 12454
PVC* + [1]	2, 4	GEON M1010 GRAY 2463	ASTM D1784 12454
PVC* + [1]	2, 4	GEON M1010 WHITE 1235	ASTM D1784 12454
PVC* + [1]	2, 4	I0210 Green 5133	ASTM D1784 12454
PVC* + [1]	2, 4	M1000 Black 2880	ASTM D1784 12454
PVC* + [1]	2, 4	M1000 Gray 2402	ASTM D1784 12454
PVC* + [1]	2, 4	M1000 Gray 2700	ASTM D1784 12454
PVC* + [1]	2, 4	M1000 White 1114	ASTM D1784 12454
PVC* + [1]	2, 4	M1000 White 1240	ASTM D1784 12454
PVC* + [1]	2, 4	M1000 White 1708	ASTM D1784 12454
PVC* + [1]	2	M1010 White 1799	ASTM D1784 12454
PVC* + [1]	2, 4	M1012 White 1244	ASTM D1784 12454
PVC* + [1]	2, 4	M1015 Black 2880	ASTM D1784 12454
PVC* + [1]	2, 4	M1015 GRAY 2132	ASTM D1784 12454
PVC* + [1]	2, 4	M1015 Gray 2700	ASTM D1784 12454
PVC* + [1]	2, 4	M1015 Gray 2709	ASTM D1784 12454
PVC* + [1]	2, 4	M1015 WHITE 1235	ASTM D1784 12454
PVC* + [1]	2, 4	M1018 White 1424	ASTM D1784 12454
PVC* + [1]	2, 4	M1019 White 1179 (HR)	ASTM D1784 12454
PVC* + [1]	2, 4	M1022 Orange 7296	ASTM D1784 12454
PVC* + [1]	2, 4	M1030 Gray 2709	ASTM D1784 12454
PVC* + [1]	2, 4	M1030 White 1424	ASTM D1784 12454
PVC* + [1]	2, 4	M1090 Black 2880	ASTM D1784 12454
PVC* + [1]	2, 4	M1100 Gray 2700	ASTM D1784 13333
PVC* + [1]	2, 4	M1100 White 1240	ASTM D1784 13333
PVC* + [1]	2, 4	M1200 Gray 2700	ASTM D1784 14333
PVC* + ¢ [1]	2, 4	M1210 Black 2880	CSA B137.3
PVC* + [1]	2, 4	M1210 Black 2880	ASTM D1784 14333
PVC* + ¢ [1]	2, 4	M1210 Gray 2306	ASTM D1784 14333
PVC* + ¢ [1]	2, 4	M1210 Gray 2306	CSA B137.3
PVC* + [1]	2, 4	M1210 Gray 2580	CSA B137.3
PVC* + [1]	2, 4	M1210 Gray 2580	ASTM D1784 14333
PVC* + ¢ [1]	2, 4	M1210 Gray 2600	ASTM D1784 14333
PVC* + ¢ [1]	2, 4	M1210 Gray 2600	CSA B137.3
PVC* + ¢ [1]	2, 4	M1210 Gray 2700	ASTM D1784 14333
PVC* + ¢ [1]	2, 4	M1210 Gray 2700	CSA B137.3
PVC* + [1]	2, 4	M1210 Green 5237	ASTM D1784 14333
PVC* + ¢ [1]	2, 4	M1210 Green 5255	CSA B137.3
PVC* + ¢ [1]	2, 4	M1210 Green 5255	ASTM D1784 14333
PVC* + [1]	2, 4	M1210 Light Grey 2863	ASTM D1784 14333
PVC* + [1]	2, 4	M1210 Natural 0000	ASTM D1784 14333
PVC* + [1]	2, 4	M1400 Black 2984	ASTM D1784 12454
PVC* + [1]	2, 4	M1400 DK Gray 2907	ASTM D1784 12454
PVC* + [1]	2, 4	M1400 LT Gray 2197	ASTM D1784 12454
PVC* + [1]	2, 4	M1400 White 1805	ASTM D1784 12454
PVC* + [1]	2, 4	M3000 Black 2880	ASTM D1784 12454
PVC* + [1]	2, 4, 5	M3000 Gray 2700	ASTM D1784 12454
PVC* + [1]	2, 4	M3000 Natural 0000	ASTM D1784 12454
PVC* + [1]	2, 4	M3000 White 1240	ASTM D1784 12454
PVC* + [1]	2, 4	M3220 Gray 2440	ASTM D1784 14333
PVC* + [1]	2, 4	M3220 White 1240	ASTM D1784 14333
* Material designation may or may not include the designation "Geon". Trade designation of product may or may not be followed by either a PL or CU: PL - Pellet CU - Cube + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Fitting and appurtenance end use not to exceed 250 sq.in./L.

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Huaru Pipe Inc
116 Maple Street
Commerce, TX 75428
United States
315-418-0770

Facility : Commerce, TX

Surface Burning Characteristics of Building Materials

Product Type	Material Type	Trade Name	Product Standard
Tubing[1] [2]	PEX	Valtec	CAN/ULC S102.2
1/2" - 1"
[1] Tubing shall be marked [cNSF®-fs CAN/ULC S102.2 FS<=25/SD<=50]. [2] Flame Spread Value (FSV) <= 25 Smoke Developed Value (SDV) <= 50
Tubing[4]	PEX	Valtec	ASTM E84
1/2" - 1"
[4] The Flame Spread Index and Smoke Developed Index based on minimum spacing of 18 inches between tubing runs. Tubing shall be marked [NSF®-fs ASTM E84 FS<=25/SD<=50].
Tubing[2]	PEX	Valtec	CAN/ULC S102.2
1/2"-1"
[2] Flame Spread Value (FSV) <= 25 Smoke Developed Value (SDV) <= 50
Tubing[3] [6]	PEX	Valtec	ASTM E84
1/2"-1"
[3] Flame Spread Index <= 25 Smoke Developed Index <=50 [6] When insulated with MICRO-LOK® fiberglass insulation as per the the pipe manufacturer's installation instructions, tubing shall be marked [cNSF®-fs ASTM E84 FS = 25 / SD = 50]

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# § +++ [G]	PEX 5306	Valtec	ASTM F876/F877
1/2" - 1" SDR 9
# Tubing is solid wall, Red, White, or Blue. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# § +++ [G]	PEX 5306	Valtec	AWWA C904
1/2" - 1" SDR 9
# Tubing is solid wall, Red, White, or Blue. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# % ¢ § +++ [G]	PEX 5306	Valtec	CSA B137.5
1/2" - 1" SDR 9
# Tubing is solid wall, Red, White, or Blue. % Tubing Certified against CSA B137.5 Shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2098, ASTM F2159 and ASSE 1061. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Radiant Floor Heating

Product Type	Material Type	Trade Name	Product Standard
Pipe# §	PEX 5306	Valtec	ASTM F876/F877
1/2" - 1" SDR 9
# Tubing is solid wall, Red, White, or Blue. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe# §	PEX 5306	Valtec	AWWA C904
1/2" - 1" SDR 9
# Tubing is solid wall, Red, White, or Blue. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe# % §	PEX 5306	Valtec	CSA B137.5
1/2" - 1" SDR 9
# Tubing is solid wall, Red, White, or Blue. % Tubing Certified against CSA B137.5 Shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2098, ASTM F2159 and ASSE 1061. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Huber Carbonates, LLC
Engineered Minerals Division
251 Gordon Street
Fairmount, GA 30139
United States
706-337-3243

Facility : Marble Falls, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Calcium Carbonate Functional Equivalent+ [1] [2]	Hubercarb M-3	5
Calcium Carbonate Functional Equivalent* + [1] [2]	Hubercarb M-3T	5
* Stearate Coated Particles + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Use of this ingredient in NSF Certified pipe requires prior authorization from NSF. [2] Cannot be used with other functional equivalent ingredients.

Ineos Olefins and Polymers USA, a Division of Ineos USA LLC.
Marina View Building
2600 South Shore Boulevard
Suite 500
League City, TX 77573
United States
800-338-0489
713-307-3760
Visit this company's website

Facility : # 1 Houston, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708***	3	K38-20-160	ASTM D2513 234373E
*** Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization.

Facility : # 2 Houston, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 2708***	3	K38-20-160	ASTM D2513 234373E
PE 2708***	3	K38-20X2399	ASTM D2513 234373E
*** Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 100^ ++	3	TUB 121B	ASTM D3350 445576C
PE 4710^ ++	3	TUB 121B	ASTM D3350 445574C
^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Facility : La Porte, TX

Gas Applications - Materials

Material Type	End Use	Trade Name	Product Standard
PE 4710***	3	TUB 121	ASTM D2513 445574C
*** Use of this material in NSF Certified pipe and tubing requires NSF's prior authorization.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PE 3608& + **	3	K44-15-122	ASTM D3350 345464A
PE 3608& +	3	K44-15-123	ASTM D3350 345464C
PE 3608& +	1	K44-15-186	ASTM D3350 345464E
PE 100^ ++	3	TUB 121	ASTM D3350 445576C
PE 4710^ ++	3	TUB 121	ASTM D3350 445574C
PE 4710^ ** ++	3	TUB121N Natural	ASTM D3350 445574A
PE 4710^ ++	3	TUB 124 Blue	ASTM D3350 445574E
PE 4710 ^ ++	3	TUB 123 White	445574E ASTM D3350
& Material has a chlorine resistance rating of CC0 (unspecified) per Table 2 of ASTM D3350. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ Meets the chlorine resistance requirements of CC3 in Table 2 of ASTM D3350 when tested in accordance with ASTM F2263. ** Natural Material ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

J-M Manufacturing Co., Inc. DBA JM Eagle
9 Peach Tree Hill Road
Livingston, NJ 07039
United States
310-693-8200
Visit this company's website

Facility : # 19 Wharton, TX

Fire Main - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + § [1] [G]*	PVC	J-M Manufacturing	ASTM D1785
1/2" - 12" Sch 40
1" - 12" Sch 80
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to NSF/ANSI/CAN 61. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# + § [1] [G]*	PVC	J-M Manufacturing	ASTM D2241
1/2" - 4" SDR 13.5
3/4" - 12" SDR 17
3/4" - 12" SDR 21
1" - 12" SDR 26
1 1/4" - 12" SDR 32.5
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. * Gasketed bell ends are not tested or Listed by NSF. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to NSF/ANSI/CAN 61. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# + [1] [G]	PVC	J-M Manufacturing	AWWA C900
14" - 48"
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to NSF/ANSI/CAN 61. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVCO	J-M Manufacturing	ASTM F1483
6" - 12" IPS
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PVCO	J-M Manufacturing	AWWA C909
6" - 16" CIOD
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [G]	PVC	J-M Manufacturing	AWWA C900
14" - 48"
# This product may be marked with an alternate trade name: PW Eagle and/or (JMM Logo) and/or JM Eagle and/or (JM Eagle Logo). + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# + [G]	PVCO	J-M Manufacturing	AWWA C909
6" - 16" CIOD
# This product may be marked with an alternate trade name: PW Eagle and/or (JMM Logo) and/or JM Eagle and/or (JM Eagle Logo). + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# + [G]	PVC	J-M Manufacturing	AWWA C900
14" - 48"
# This product may be marked with an alternate trade name: PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe# + [G]	PVCO	J-M Manufacturing	AWWA C909
6" - 16" CIOD
# This product may be marked with an alternate trade name: PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

K-Bin, Inc.
5616 Highway 332 East
Freeport, TX 77541
United States
979-233-6610

Facility : Freeport, TX

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC	2	KB-2000 GR	ASTM D4396 11432
PVC	2	KB-2000 WH	ASTM D4396 11432
PVC	1	KBD - 4038	ASTM D4396 11432
PVC	2	KB-2000 GR 135	ASTM D4396 11432
PVC	2	KB-2000 GR 243	ASTM D4396 11432
PVC	2	KB-2000 BRN	ASTM D4396 11432
PVC	2	KB-2007 WH	ASTM D4396 11432
PVC	2	KB-2007 GR	ASTM D4396 11432
PVC	2	KB-2007 BL	ASTM D4396 11432
PVC	2	KB-2007 BRN	ASTM D4396 11432
PVC	2	KBD-2000 WH	ASTM D4396 11432
PVC	1	KBD-4000	ASTM D4396 11432
PVC	1	KBD-4000 GR	ASTM D4396 11432

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC+	2	KB-2000 GR	ASTM D1784 12454
PVC+	2	KB-2000 WH	ASTM D1784 12454
PVC+	2	KB-2000 GR 135	ASTM D1784 12454
PVC+	2	KBD-2000 WH	ASTM D1784 12454
PVC+	2	KB-2000 GR 243	ASTM D1784 12454
PVC+	2	KB-2000 BRN	ASTM D1784 12454
PVC+	2	KB-2007 WH	ASTM D1784 12454
PVC+	2	KB-2007 GR	ASTM D1784 12454
PVC+	2	KB-2007 BL	ASTM D1784 12454
PVC+	2	KB-2007 BRN	ASTM D1784 12454
PVC+	1	KBD-4000	ASTM D1784 12454
PVC+	1	KBD-4000 GR	ASTM D1784 12454
PVC+	1	KBD-4011	ASTM D1784 12454
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Kaneka North America LLC
6161 Underwood Road
Pasadena, TX 77507
United States
800-526-3223
281-474-1841
Visit this company's website

Facility : Pasadena, TX

Ingredient Suppliers

Product Type

Trade Name

Max Use Level (phr)

Processing Aid+ [1] [2]

KANE ACE PA-20

0.0 - 2.0 phr

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
[1] Certified to NSF/ANSI 14 and also approved in Table 8 of the PPI PVC Range Composition. 
    Approved for a use range of 0.0 - 2.0 phr.
[2] Use of this ingredient in NSF Certified products requires prior authorization from NSF,
    unless user is an authorized holder of the PPI PVC Range Composition.

KibbeChem, Inc.
22243 Innovation Drive
Elkhart, IN 46514
United States
219-266-1234

Facility : Waco, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Colorant - Liquid Dispersed+ [1] [2] [3]	KC-LD Black	0.0 - 0.50
Colorant - Liquid Dispersed+ [1] [2] [3]	KC-LD Blue	0.0 - 0.50
Colorant - Liquid Dispersed+ [1] [2] [3]	KC-LD Green	0.0 - 0.50
Colorant - Liquid Dispersed+ [1] [2] [3]	KC-LD Purple	0.0 - 0.50
Colorant - Liquid Dispersed+ [1] [2] [3]	KC-LD Tan	0.0 - 0.50
Colorant - Liquid Dispersed+ [1] [2] [3]	KC-LD Yellow	0.0 - 0.50
Colorant - Liquid Dispersed+ [1] [2] [3]	KC-LD Yellow/Green	0.0 - 0.50
Combination Ingredient Package+ [2] [4] [5]	KC-TI80WC	0.63 - 3.75
Functionally Equivalent Ingredient Package+ [2] [5] [6] [7] [8]	KC-TI75S White	0.66 - 1.50
Titanium Dioxide Functional Equivalent - Liquid Dispersed+ [2] [6] [9] [10]	KC-TI75 Blue	0.67 - 1.35
Titanium Dioxide Functional Equivalent - Liquid Dispersed+ [2] [6] [9] [10]	KC-TI75 Gray	0.67 - 1.35
Titanium Dioxide Functional Equivalent - Liquid Dispersed+ [2] [6] [9] [10]	KC-TI75 Green	0.67 - 1.35
Titanium Dioxide Functional Equivalent - Liquid Dispersed+ [2] [6] [9] [10]	KC-TI75 Purple	0.67 - 1.35
Titanium Dioxide Functional Equivalent - Liquid Dispersed+ [2] [6] [9] [10]	KC-TI75 White	0.67 - 1.35
Titanium Dioxide Functional Equivalent - Liquid Dispersed+ [2] [6] [10] [11]	KC-TI80 White	0.63 - 1.35
Titanium Dioxide Functional Equivalent - Liquid Dispersed+ [2] [6] [10] [12]	KC-TI85 White	0.59 - 1.35
Colorant - Dry Powder +[2] [13]	KC-MP Black	0.00 - 0.50
Colorant - Dry Powder +[2] [13]	KC-MP Blue	0.00 - 0.50
Colorant - Dry Powder +[2] [13]	KC-MP Green	0.00 - 0.50
Colorant - Dry Powder +[2] [13]	KC-MP Purple	0.00 - 0.50
Colorant - Dry Powder +[2] [13]	KC-MP Yellow	0.00 - 0.50
Colorant - Dry Powder +[2] [13]	KC-MP Yellow/Green	0.00 - 0.50
Colorant - Dry Powder +[2] [13]	KC-MP Tan	0.00 - 0.50
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified to NSF/ANSI 14 and also approved in Table 9B of the PPI PVC Range Composition. Approved for a use range of 0.0 - 0.50 phr. [2] Use of this ingredient in NSF Certified products requires prior authorization from NSF, unless user is an authorized holder of the PPI PVC Range Composition. [3] Liquid dispersed colorant may not be combined with other liquid dispersed colorants, including those liquid titanium dioxides identified in Table 6B of the PPI PVC Range Composition. [4] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.63 - 3.75 phr. [5] For PPI PVC Range Composition holders, see the PPI PVC Range Composition for individual ingredient contributions. Additional amounts of other approved ingredients can be added, but the total combined percentage cannot exceed 100% of the allowable phr. [6] Cannot be used with other functional equivalent ingredients. [7] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 0.66 - 1.50 phr. [8] Additional heat stabilizer must be added to meet minimum requirements of TR-2. The allowed heat stabilizer must be listed in Table 2 with a use range of 0.3 - 1.0 phr. Additional heat stabilizer added must be the same as utilized in the combination package. [9] Certified to NSF/ANSI 14 and also approved in Table 6B of the PPI PVC Range Composition. Approved for a use range of 0.67 - 1.35 phr. [10] For PPI PVC Range Composition holders, see the PPI PVC Range Composition for the amount of additional titanium dioxide that may be added. When adding TiO2, it must be in dry form and be NSF/ANSI Standard 14 Listed. [11] Certified to NSF/ANSI 14 and also approved in Table 6B of the PPI PVC Range Composition. Approved for a use range of 0.63 - 1.35 phr. [12] Certified to NSF/ANSI 14 and also approved in Table 6B of the PPI PVC Range Composition. Approved for a use range of 0.59 - 1.35 phr. [13] Certified to NSF/ANSI 14 and also approved in Table 9A of the PPI PVC Range Composition. Approved for a use range of 0.0 - 0.50 phr.

Manuspec Co., Inc.
23802 FM2978 - Building #C2
Tomball, TX 77375
United States
281-351-9889
Visit this company's website

Facility : Tomball, TX

Thread Compounds, Sealants and Lubricants

Product Type	For Use With	Trade Name
Thread Sealant* +++	PW, DWV, SW	MS67 Multi-Seal Thread Sealant
Thread Sealant* @ +++	PW, DWV, SW	MS92 Multi-Seal with Teflon Thread Sealant
* Certified to IAPMO PS-36 for use with ABS, CPVC, PP and PVC. @ Certified for the following colors: Blue, Gold and White. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F).

Modern Polymer Pipe and Extrusions, LLC
1655 Louisiana Street
Beaumont, TX 77701
United States
800-231-8198
409-504-4654
Visit this company's website

Facility : Pasadena, TX

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	HDPE 4710 Poly Pipe	ASTM D3035
2" - 3" SDR 7
2" - 3" SDR 9
2" - 3" SDR 11[1]
2" - 3" SDR 13.5[1]
2" - 3" SDR 17[1]
2" - 3" SDR 21[1]
2" - 3" SDR 26[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	HDPE 4710 Poly Pipe	ASTM F714
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21
4" - 24" SDR 26
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	HDPE 4710 Poly Pipe	AWWA C901
2" - 3" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	HDPE 4710 Poly Pipe	AWWA C906
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 4710	HDPE 4710 Poly Pipe	ASTM D3035
2" - 3" SDR 7
2" - 3" SDR 9
2" - 3" SDR 11
2" - 3" SDR 13.5
2" - 3" SDR 17
2" - 3" SDR 21
2" - 3" SDR 26
Pipe	PE 4710	HDPE 4710 Poly Pipe	ASTM F714
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21
4" - 24" SDR 26
Pipe	PE 4710	HDPE 4710 Poly Pipe	AWWA C901
2" - 3" SDR 9
Pipe	PE 4710	HDPE 4710 Poly Pipe	AWWA C906
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe	PE 4710	HDPE 4710 Poly Pipe	ASTM F714
4" - 24" SDR 7
4" - 24" SDR 9
4" - 24" SDR 11
4" - 24" SDR 13.5
4" - 24" SDR 17
4" - 24" SDR 21
4" - 24" SDR 26

Oxy Vinyls, LP
14555 Dallas Parkway
Suite 400
Dallas, TX 75254
United States
877-699-8465
972-720-7408

Facility : Deer Park, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
PVC Resin+ [1] [2]	OxyVinyls™ 225	100
PVC Resin+ [1] [2]	OxyVinyls™ 225G	100
PVC Resin+ [1] [2]	OxyVinyls™ 225P	100
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified to NSF/ANSI 14 and also approved in Table 1 of the PPI PVC Range Composition. Approved for a use range of 100 phr. [2] Use of this ingredient in NSF Certified products requires prior authorization from NSF, unless user is an authorized holder of the PPI PVC Range Composition.

Performance Pipe
A Div. of Chevron Phillips Chem Co., LP
8261 Belleview Drive
Suite 110
Plano, TX 75024
United States
972-599-6600
Visit this company's website

Facility : Brownwood, TX

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe% ¢ § [1]*	PE 4710	DriscoPlex 8400	ASTM D2513
1/2" - 10"
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] All sizes between 1/2" and 10" with a DR of 11 or thinner are Certified.
Pipe% ¢*	PE 4710	DriscoPlex 8400	CSA B137.4
1/2" - 10" SDR 11
1/2" - 10" SDR 17
1/2" - 10" SDR 21
1/2" - 10" SDR 13.5
% Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Pipe# % §*	PE 4710	YELLOWSTRIPE® 8300	ASTM D2513
1/2" - 12"
# All sizes between 1/2" and 12" with a DR of 11 or thinner are Certified. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Pipeline Plastics, LLC
1301 Solana Boulevard
Suite 1440
Westlake, TX 76262
United States
940-627-9100
Visit this company's website

Facility : Decatur, TX

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +*	PE 4710	Pipeline Plastics	FM 1613
IPS 2" - 24" DR 7 (PC 335)
IPS 2" - 24" DR 9 (PC 250)
IPS 2" - 36" DR 11 (PC 200)
DIPS 2" - 24" DR 7 (PC 335)
DIPS 2" - 24" DR 9 (PC 250)
DIPS 2" - 36" DR 11 (PC 200)
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM D3035
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11[1]
1" - 3" DR 13.5[1]
1" - 3" DR 15.5[1]
1" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1" - 1 ¼ " DR 32.5[1] [2]
1½ - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 36" IPS DR 9
42" IPS DR 9[2]
4" - 42" IPS DR 11
48" - 54" IPS DR 11[2]
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26
4" - 65" IPS DR 32.5
4" - 54" IPS DR 41
60" - 65" IPS DR 41[2]
4" - 24" DIPS DR 7
30" - 36" DIPS DR 7[2]
4" - 30" DIPS DR 9
36" - 42" DIPS DR 9[2]
4" - 36" DIPS DR 11
42" - 54" DIPS DR 11[2]
4" - 48" DIPS DR 13.5
54" - 60" DIPS DR 13.5[2]
4" - 48" DIPS DR 17
4" - 60" DIPS DR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C901
1" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C906
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 26" IPS DR 7.3[2]
4" - 34" IPS DR 9
36" - 42" IPS DR 9[2]
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26[2]
4" - 65" IPS DR 32.2[2]
4" - 65" IPS DR 41[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 30" DIOD DR 9
4" - 36" DIOD DR 11
4" - 48" DIOD DR 13.5
4" - 60" DIOD DR 17
4" - 60" DIOD DR 21
4" - 60" DIOD DR 26[2]
4" - 60" DIOD DR 32.5[2]
4" - 60" DIOD DR 41[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Levelland, TX

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe +*	PE 4710	Pipeline Plastics	FM 1613
IPS 2" - 24" DR 7 (PC 335)
IPS 2" - 24" DR 9 (PC 250)
IPS 2" - 36" DR 11 (PC 200)
DIPS 2" - 24" DR 7 (PC 335)
DIPS 2" - 24" DR 9 (PC 250)
DIPS 2" - 36" DR 11 (PC 200)
* Products comply with requirements of NFPA 24 Standard for the Installation of Private Fire Service Mains and Their Appurtenances. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM D3035
1" - 3" DR 7
1" - 3" DR 9
1" - 3" DR 11[1]
1" - 3" DR 13.5[1]
1" - 3" DR 15.5[1]
1" - 3" DR 17[1]
1" - 3" DR 21[1]
1" - 3" DR 26[1]
1" - 1 ¼ " DR 32.5[1] [2]
1½ - 3" DR 32.5[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. [2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	ASTM F714
4" - 18" IPS DR 7.3
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 36" IPS DR 9
42" IPS DR 9[2]
4" - 42" IPS DR 11
48" - 54" IPS DR 11[2]
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26
4" - 65" IPS DR 32.5
4" - 54" IPS DR 41
60" - 65" IPS DR 41[2]
4" - 24" DIPS DR 7
30" - 36" DIPS DR 7[2]
4" - 30" DIPS DR 9
36" - 42" DIPS DR 9[2]
4" - 36" DIPS DR 11
42" - 54" DIPS DR 11[2]
4" - 48" DIPS DR 13.5
54" - 60" DIPS DR 13.5[2]
4" - 48" DIPS DR 17
4" - 60" DIPS DR 21
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C901
1" - 3" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 4710	Pipeline Plastics	AWWA C906
4" - 26" IPS DR 7
28" - 36" IPS DR 7[2]
4" - 26" IPS DR 7.3[2]
4" - 34" IPS DR 9
36" - 42" IPS DR 9[2]
4" - 42" IPS DR 11
4" - 48" IPS DR 13.5
54" - 65" IPS DR 13.5[2]
4" - 65" IPS DR 17
4" - 65" IPS DR 21
4" - 65" IPS DR 26[2]
4" - 65" IPS DR 32.2[2]
4" - 65" IPS DR 41[2]
4" - 24" DIOD DR 7
4" - 24" DIOD DR 7.3[2]
4" - 30" DIOD DR 9
4" - 36" DIOD DR 11
4" - 48" DIOD DR 13.5
4" - 60" DIOD DR 17
4" - 60" DIOD DR 21
4" - 60" DIOD DR 26[2]
4" - 60" DIOD DR 32.5[2]
4" - 60" DIOD DR 41[2]
[2] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Reagens USA, Inc.
9640 Bayport Boulevard
Pasadena, TX 77507
United States
281-291-8484

Facility : Pasadena, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Combination Ingredient Package+ [1] [2] [3]	Realube RLS-5075	1.5 - 2.4
Combination Ingredient Package[2] [3] [4]	Realube RW 9310	0.7 - 1.66
Combination Ingredient Package[2] [3] [4]	Realube RW 9310-3	0.7 - 1.66
Combination Ingredient Package+ [2] [3] [5]	RW 7030	1.33 - 2.14
Combination Ingredient Package+ [2] [3] [5]	S WAX 1T	1.33 - 2.14
Combination Ingredient Package+ [2] [3] [6]	SL 25	1.62 - 2.49
Functionally Equivalent Ingredient Package+ [2] [3] [7]	RW 9010	0.67 - 1.60
Functionally Equivalent Ingredient Package+ [2] [3] [8]	RLS 5000	1.43 - 2.25
Functionally Equivalent Ingredient Package+ [2] [3] [8]	S WAX 5	1.43 - 2.25
Functionally Equivalent Ingredient Package+ [2] [3] [9]	RW 4545	1.33 - 2.20
Functionally Equivalent Ingredient Package+ [2] [3] [10]	RW 5050	1.20 - 2.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6610	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6610 M	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6611	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6611 A	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6611 S	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6612	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6631	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6634	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6638	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6640	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6650	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6676	0.30 - 1.00
Heat Stabilizer+ [2] [11]	REA TIN OR RT 6676 S	0.30 - 1.00
Heat Stabilizer+ [2] [12] [13]	Reapak BTU/1844	0.50 - 2.0
Paraffin Wax Functional Equivalent+ [2] [12] [14]	C Wax 100	0.60 - 1.50
Paraffin Wax Functional Equivalent+ [2] [12] [14]	C Wax 100T	0.60 - 1.50
Paraffin Wax Functional Equivalent+ [2] [12] [14]	RW 1600	0.60 - 1.50
Paraffin Wax+ [15]	Realube RW 70	0.60 - 1.50
Paraffin Wax+ [15]	Realube RW 73	0.60 - 1.50
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 1.5-2.4 phr. [2] Use of this ingredient in NSF Certified products requires prior authorization from NSF, unless user is an authorized holder of the PPI PVC Range Composition. [3] For PPI PVC Range Composition holders, see the PPI PVC Range Composition for individual ingredient contributions. Additional amounts of other approved ingredients can be added, but the total combined percentage cannot exceed 100% of the allowable phr. [4] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.7 - 1.66 phr. [5] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.33 - 2.14 phr. [6] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.62 - 2.49 phr. Additional amounts of heat stabilizer is needed to achieve the required minimum use level. [7] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 0.67 - 1.60 phr. [8] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.43 - 2.25 phr. [9] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.33 - 2.20 phr. [10] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.20 - 2.00 phr. [11] Certified to NSF/ANSI 14 and also approved in Table 2 of the PPI PVC Range Composition. Approved for a use range of 0.30 - 1.00 phr. [12] Cannot be used with other functional equivalent ingredients. [13] The approved allowable use level of 0.5 - 2.0 phr corresponds to a paraffin wax content of 1.10 - 0.70 phr in the test formulation such that at 0.50 phr Reapak BTU/1844 the paraffin wax was 1.10 phr and when at 2.0 phr Reapak BTU/1844 the paraffin wax was 0.70 phr. [14] Certified to NSF/ANSI 14 and also approved in Table 4B of the PPI PVC Range Composition. Approved for a use range of 0.60 - 1.50 phr. [15] Certified to NSF/ANSI 14 and also approved in Table 4A of the PPI PVC Range Composition. Approved for a use range of 0.60 - 1.50 phr.

Rheogistics, A Division of IGI
50 Salome Drive
Toronto, ON M1S 2A8
Canada
416-293-4151

Facility : Baytown, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Combination Ingredient Package+ [2] [3] [9]	Synertive L355	0.68 - 1.68
Paraffin Wax+ [1]	Synertive RX-165	0.6 - 1.5
Paraffin Wax+ [1]	Synertive RX-165 Classic	0.6 - 1.5
Combination Ingredient Package[2] [3] [4]	Synertive RX-310	0.54 - 1.66
Combination Ingredient Package[2] [3] [5]	Synertive RX-313	0.8 - 1.73
Combination Ingredient Package[2] [3] [6]	Synertive RX-315-S	0.7 - 1.77
Combination Ingredient Package[2] [3] [7]	Synertive RX-320	0.74 - 1.6
Combination Ingredient Package[2] [3] [8]	Synertive RX-320-S	0.75 - 1.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified to NSF/ANSI 14 and also approved in Table 4A of the PPI PVC Range Composition. Approved for a use range of 0.60 - 1.5 phr. [2] Use of this ingredient in NSF Certified products requires prior authorization from NSF, unless user is an authorized holder of the PPI PVC Range Composition. [3] For PPI PVC Range Composition holders, see the PPI PVC Range Composition for individual ingredient contributions. Additional amounts of other approved ingredients can be added, but the total combined percentage cannot exceed 100% of the allowable phr. [4] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.54 - 1.66 phr. [5] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.8 - 1.73 phr. [6] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.75 - 1.5 phr. [7] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.74 - 1.6 phr. [8] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.7 - 1.77 phr. [9] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.68 - 1.68.

S & B Technical Products, Inc. / Terramix S.A./dBa Hultec, Inc.
2170 Buckthorn Pl
Suite 450
Spring, TX 77380
United States
800-432-8213
817-923-3344

Facility : Spring, TX

Fire Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Gaskets+	EPDM	EPDM HT533 Hydrogrip AG	FM 1612
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Gaskets+	EPDM	EPDM HT533 Hydrogrip CIOD	FM 1612
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Gaskets+	EPDM	EPDM HT533 Hydrogrip IPS	FM 1612
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Gaskets+	EPDM	SBR HT627 Hydrogrip AG	FM 1612
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Gaskets+	EPDM	SBR HT627 Hydrogrip CIOD	FM 1612
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Gaskets+	EPDM	SBR HT627 Hydrogrip IPS	FM 1612
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Gaskets + [1] [G]*	NBR	NBR HT4537 C900 Rieber	ASTM F477
2" - 16"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 C900 Super Rieber Patented	ASTM F477
2" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 C905 Super Rieber Patented	ASTM F477
14" - 48"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Fastite Gasket	ASTM F477
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Flange Tyte	ASTM F477
4" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Full Face Flange Tyte	ASTM F477
4" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 IPS 2241 Rieber	ASTM F477
1 1/2" - 18"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 IPS 2241 Super Rieber	ASTM F477
14" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 TURNER C909	ASTM F477
4" - 18"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 TURNER BIAX C909	ASTM F477
4" - 16"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 TURNER BIAX IPS	ASTM F477
4" - 16"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 MJ Field Lok	ASTM F477
4" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Metric Tyton	ASTM F477
80 mm - 1200 mm
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Rest MJ (PVC)	ASTM F477
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Rieber IPS	ASTM F477
1 1/2" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Tyton	ASTM F477
3" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Tyton CM	ASTM F477
3" - 42"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 Sure Stop Gasket	ASTM F477
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [G]*	NBR	NBR HT4537 FIELD LOK 350	ASTM F477
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Hydrogrip AG	ASTM F477
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Hydrogrip CIOD	ASTM F477
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Hydrogrip IPS	ASTM F477
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Hydrogrip AG	CSA B137.3
4" - 30"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Hydrogrip CIOD	CSA B137.3
4" - 30"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Hydrogrip IPS	CSA B137.3
4" - 30"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Hydrogrip AG	CSA B137.3
4" - 30"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Hydrogrip CIOD	CSA B137.3.1
4" - 30"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Hydrogrip IPS	CSA B137.3.1
4" - 30"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 RCT Flex Tite C900	ASTM F477
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 RCT Flex Tite IPS Transition	ASTM F477
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 C900 Rieber Gasket	ASTM F477
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 C900 Super Rieber Patented Gasket	ASTM F477
2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 C905 Super Rieber Patented Gasket	ASTM F477
14" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Fastite Gasket	ASTM F477
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Flange Tyte	ASTM F477
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Sewer Ret/ Ring	ASTM F477
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 VF Sewer	ASTM F477
4" - 8"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Full Face Flange Tyte	ASTM F477
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 IPS 2241 Rieber Gasket	ASTM F477
1 1/2" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 IPS 2241 Super Rieber Gasket	ASTM F477
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 MJ Field Lok Gasket	ASTM F477
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Push-On Gasket	ASTM F477
3" - 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Push-On Metric Gasket	ASTM F477
800 mm - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Rest MJ (PVC)	ASTM F477
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Rieber CIOD Gasket	ASTM F477
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Rieber IPS Gasket	ASTM F477
1 1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Rieber Metric Pressure Gasket	ASTM F477
50 mm - 630 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Rieber Metric Pressure Platinum Gkt	ASTM F477
50 mm - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [2] [G]	SBR	SBR HT627 Tyton Gasket	ASTM F477
3" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	SBR	SBR HT627 Turner C909	ASTM F477
4" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	SBR	SBR HT627 Sure Stop Gasket	ASTM F477
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	SBR	SBR HT627 FIELD LOK 350	ASTM F477
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1]	SBR	SBR HT727 FASTITE	ASTM F477
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size".
Gaskets+ [1]	SBR	SBR HT727 PUSH ON	ASTM F477
3" - 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size".
Gaskets+ [1]	SBR	SBR HT727 RIEBER CIOD	ASTM F477
4" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size".
Gaskets+ [1]	SBR	SBR HT727 PRR SEWER	ASTM F477
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size".
Gaskets+ [1]	SBR	SBR HT727 RIEBER IPS	ASTM F477
1 1/2" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size".
Gaskets+ [1]	SBR	SBR HT727 TYTON	ASTM F477
3" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size".
Gaskets+ [1] [G]	EPDM	EPDM HT533 Hydrogrip AG	ASTM F477
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT533 Hydrogrip CIOD	ASTM F477
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT533 Hydrogrip IPS	ASTM F477
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT533 Hydrogrip AG	CSA B137.3
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT533 Hydrogrip CIOD	CSA B137.3
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT533 Hydrogrip IPS	CSA B137.3.1
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT533 Hydrogrip AG	CSA B137.3.1
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT533 Hydrogrip CIOD	CSA B137.3
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT533 Hydrogrip IPS	CSA B137.3.1
4" - 30"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Full Face Flange Tyte	ASTM F477
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 TURNER C909	ASTM F477
4" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 FIELD LOK 350	ASTM F477
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 TURNER BIAX IPS	ASTM F477
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 TURNER BIAX C909	ASTM F477
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 C900 Rieber	ASTM F477
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 C900 Super Rieber Patented	ASTM F477
2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 C905 Super Rieber Patented	ASTM F477
14" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Fastite Gasket	ASTM F477
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Flange Tyte	ASTM F477
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 IPS 2241 Rieber	ASTM F477
1.5" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 IPS 2241 Super Rieber	ASTM F477
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 MJ Field Lok	ASTM F477
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Metric Tyton	ASTM F477
80 - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Rest MJ (PVC)	ASTM F477
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 T Saddle IP	ASTM F477
4" - 6"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Y Saddle IP	ASTM F477
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Rieber IPS	ASTM F477
1.5" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Sure Stop Gasket	ASTM F477
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Tyton Gasket	ASTM F477
3" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [G]	EPDM	EPDM HT553 Tyton CM	ASTM F477
3" - 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Full Face Flange Tyte	CSA B137.3
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 TURNER C909	CSA B137.3
4" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 TURNER BIAX IPS	CSA B137.3
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 TURNER BIAX C909	CSA B137.3
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 FIELD LOK 350	CSA B137.3
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 C900 Rieber	CSA B137.3
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 C900 Super Rieber Patented	CSA B137.3
2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 C905 Super Rieber Patented	CSA B137.3
14" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Fastite Gasket	CSA B137.3
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Flange Tyte	CSA B137.3
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 IPS 2241 Rieber	CSA B137.3
1.5" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 IPS 2241 Super Rieber	CSA B137.3
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 MJ Field Lok	CSA B137.3
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Metric Tyton	CSA B137.3
80 - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 T Saddle IP	CSA B137.3
4" - 6"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Y Saddle IP	CSA B137.3
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Rest MJ (PVC)	CSA B137.3
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Sure Stop Gasket	CSA B137.3
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Rieber IPS	CSA B137.3
1.5" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Tyton Gasket	CSA B137.3
3" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 Tyton CM	CSA B137.3
3" - 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 C900 Rieber	CSA B137.3
2" - 16"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 C900 Super Rieber Patented	CSA B137.3
2" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 C905 Super Rieber Patented	CSA B137.3
14" - 48"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Fastite Gasket	CSA B137.3
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Flange Tyte	CSA B137.3
4" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 IPS 2241 Rieber	CSA B137.3
1 1/2" - 18"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 IPS 2241 Super Rieber	CSA B137.3
14" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 MJ Field Lok	CSA B137.3
4" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Metric Tyton	CSA B137.3
80 mm - 1200 mm
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Rest MJ (PVC)	CSA B137.3
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Rieber IPS	CSA B137.3
1 1/2" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Tyton	CSA B137.3
3" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Tyton CM	CSA B137.3
3" - 42"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 FIELD LOK 350	CSA B137.3
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Full Face Flange Tyte	CSA B137.3
4" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 Sure Stop Gasket	CSA B137.3
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 TURNER BIAX C909	CSA B137.3
4" - 16"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 TURNER BIAX IPS	CSA B137.3
4" - 16"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [1] [3] [4] [G]*	NBR	NBR HT4537 TURNER C909	CSA B137.3
4" - 18"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Fastite Gasket	CSA B137.3
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Full Face Flange Tyte	CSA B137.3
4" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Push-On Gasket	CSA B137.3
3" - 42"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Push-On Metric Gasket	CSA B137.3
80 mm - 1200 mm
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rieber CIOD Gasket	CSA B137.3
4" - 48"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rieber IPS Gasket	CSA B137.3
1 1/2" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rieber Metric Pressure Gasket	CSA B137.3
50 mm - 630 mm
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rieber Metric Platinum Pressure	CSA B137.3
50 mm - 1200 mm
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Tyton Gasket	CSA B137.3
3" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 C900 Rieber Gasket	CSA B137.3
2" - 16"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 C900 Super Rieber Patented Gasket	CSA B137.3
2" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 C905 Super Rieber Patented Gasket	CSA B137.3
14" - 48"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Flange Tyte Gasket	CSA B137.3
4" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 IPS 2241 Rieber Gasket	CSA B137.3
1 1/2" - 18"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 IPS 2241 Super Rieber Gasket	CSA B137.3
14" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 MJ Field Lok Gasket	CSA B137.3
4" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rest MJ (PVC)	CSA B137.3
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 RCT Flex Tite C900	CSA B137.3
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 RCT Flex Tite IPS Transition	CSA B137.3
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 FIELD LOK 350	CSA B137.3
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Sewer Ret/Ring	CSA B137.3
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Sure Stop Gasket	CSA B137.3
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Turner C909	CSA B137.3
4" - 18"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 VF Sewer	CSA B137.3
4" - 8"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Full Face Flange Tyte	CSA B137.3.1
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [3] [G]	EPDM	EPDM HT553 FIELD LOK 350	CSA B137.3.1
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 TURNER C909	CSA B137.3.1
4" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 TURNER BIAX IPS	CSA B137.3.1
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 TURNER BIAX C909	CSA B137.3.1
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 C900 Rieber	CSA B137.3.1
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 C900 Super Rieber Patented	CSA B137.3.1
2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 C905 Super Rieber Patented	CSA B137.3.1
14" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Fastite Gasket	CSA B137.3.1
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Flange Tyte	CSA B137.3.1
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 IPS 2241 Rieber	CSA B137.3.1
1.5" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 IPS 2241 Super Rieber	CSA B137.3.1
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 MJ Field Lok	CSA B137.3.1
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 T Saddle IP	CSA B137.3.1
4" - 6"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Y Saddle IP	CSA B137.3.1
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Metric Tyton	CSA B137.3.1
80 - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Rest MJ (PVC)	CSA B137.3.1
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Rieber IPS	CSA B137.3.1
1.5" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Sure Stop Gasket	CSA B137.3.1
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Tyton Gasket	CSA B137.3.1
3" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ ¢ [1] [4] [G]	EPDM	EPDM HT553 Tyton CM	CSA B137.3.1
3" - 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 C900 Rieber	CSA B137.3.1
2" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 C900 Super Rieber Patented	CSA B137.3.1
2" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 C905 Super Rieber Patented	CSA B137.3.1
14" - 48"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Fastite Gasket	CSA B137.3.1
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Flange Tyte	CSA B137.3.1
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 IPS 2241 Rieber	CSA B137.3.1
1 1/5" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 IPS 2241 Super Rieber	CSA B137.3.1
14" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 MJ Field Lok	CSA B137.3.1
4" - 24"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Metric Tyton	CSA B137.3.1
80 mm - 1200 mm
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Rest MJ (PVC)	CSA B137.3.1
4" - 12"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Rieber IPS	CSA B137.3.1
1 1/2" - 24
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Tyton	CSA B137.3.1
3" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Tyton CM	CSA B137.3.1
3" - 42"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 FIELD LOK 350	CSA B137.3.1
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Full Face Flange Tyte	CSA B137.3.1
4" - 64"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 Sure Stop Gasket	CSA B137.3.1
4" - 36"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 TURNER BIAX C909	CSA B137.3.1
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 TURNER BIAX IPS	CSA B137.3.1
4" - 16"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets+ [1] [3] [4] [G]	NBR	NBR HT4537 TURNER C909	CSA B137.3.1
4" - 18"
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified for use in distribution systems only, with width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Fastite Gasket	CSA B137.3.1
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Full Face Flange Tyte	CSA B137.3.1
4" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Push-On Gasket	CSA B137.3.1
3" - 42"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Push-On Metric Gasket	CSA B137.3.1
80 mm - 1200 mm
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rieber CIOD Gasket	CSA B137.3.1
4" - 48"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rieber IPS Gasket	CSA B137.3.1
1 1/2" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rieber Metric Pressure Gasket	CSA B137.3.1
50 mm - 630 mm
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rieber Metric Platinum Pressure	CSA B137.3.1
50 mm - 1200 mm
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Tyton Gasket	CSA B137.3.1
3" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 C900 Rieber Gasket	CSA B137.3.1
2" - 16"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 C900 Super Rieber Patented Gasket	CSA B137.3.1
2" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 C905 Super Rieber Patented Gasket	CSA B137.3.1
14" - 48"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Flange Tyte Gasket	CSA B137.3.1
4" - 64"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 IPS 2241 Rieber Gasket	CSA B137.3.1
1 1/2" - 18"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 IPS 2241 Super Rieber Gasket	CSA B137.3.1
14" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 MJ Field Lok Gasket	CSA B137.3.1
4" - 24"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Rest MJ (PVC)	CSA B137.3.1
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 RCT Flex Tite C900	CSA B137.3.1
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	RCT Flex Tite IPS Transition	CSA B137.3.1
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 FIELD LOK 350	CSA B137.3.1
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Sewer Ret/Ring	CSA B137.3.1
4" - 12"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Sure Stop Gasket	CSA B137.3.1
4" - 36"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 Turner C909	CSA B137.3.1
4" - 18"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Gaskets + [2] [3] [4] [G]*	SBR	SBR HT627 VF Sewer	CSA B137.3.1
4" - 8"
* Certified for Shore Hardness 55 +/-5 Durometer. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [2] Certified for width exposure of no more than 1/2" in pipes with diameters shown in "size". [3] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3. [4] Product is Certified as meeting the elastomeric gasket requirements of CSA B137.3.1. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Sewer Main - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Gaskets¢ [1]	SBR	SBR HT627 Hydrogrip AG	CSA B182.2
4" - 30"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Hydrogrip CIOD	CSA B182.2
4" - 30"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Hydrogrip IPS	CSA B182.2
4" - 30"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 RCT Flex Tite IPS Transition	CSA B182.2
4" -12"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 RCT Flex Tite C900	CSA B182.2
4" - 12"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Sewer Ret/Ring	CSA B182.2
4" -12"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 FIELD LOK 350	CSA B182.2
4" - 36"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Turner C909	CSA B182.2
4" - 18"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 VF Sewer	CSA B182.2
4" - 8"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Fastite Gasket	CSA B182.2
4" - 36"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Full Face Flange Tyte	CSA B182.2
4" - 64"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Push-On Gasket	CSA B182.2
3" - 42"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Push-On Metric Gasket	CSA B182.2
80mm - 1200mm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Rieber CIOD Gasket	CSA B182.2
4" - 48"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Rieber IPS Gasket	CSA B182.2
1.5" - 24"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Rieber Metric Pressure Gasket	CSA B182.2
50mm - 630mm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Rieber Metric Pressure Platinum Gkt	CSA B182.2
50mm - 1200mm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Tyton Gasket	CSA B182.2
3" - 64"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 C900 Rieber Gasket	CSA B182.2
2" - 16"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 C900 Super Rieber Patented Gasket	CSA B182.2
2" - 12"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 C905 Super Rieber Patented Gasket	CSA B182.2
14" - 48"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Flange Tyte Gasket	CSA B182.2
4" - 64"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 IPS 2241 Rieber Gasket	CSA B182.2
1.5" - 18"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 IPS 2241 Super Rieber Gasket	CSA B182.2
14" - 24"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 MJ Field Lok Gasket	CSA B182.2
4" - 24"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Rest MJ (PVC)	CSA B182.2
4" - 12"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT627 Sure Stop Gasket	CSA B182.2
4" - 36"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT727 PRR SEWER	CSA B182.2
4" - 12"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT727 FASTITE	CSA B182.2
4" - 36"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT727 PUSH ON	CSA B182.2
3" - 42"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT727 RIEBER CIOD	CSA B182.2
4" - 48"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT727 RIEBER IPS	CSA B182.2
1 / 12" - 24"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	SBR	SBR HT727 TYTON	CSA B182.2
3" - 24"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Full Face Flange Tyte	CSA B182.2
4" - 64"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 TURNER BIAX C909	CSA B182.2
4" - 16"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 TURNER BIAX IPS	CSA B182.2
4" - 16"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 TURNER C909	CSA B182.2
4" - 18"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 C900 Rieber	CSA B182.2
2" - 16"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 C900 Super Rieber Patented	CSA B182.2
2" - 12"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 C905 Super Rieber Patented	CSA B182.2
14" - 48"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Fastite Gasket	CSA B182.2
4" - 36"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Flange Tyte	CSA B182.2
4" - 64"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 IPS 2241 Rieber	CSA B182.2
1.5" - 18"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 IPS 2241 Super Rieber	CSA B182.2
14" - 24"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 MJ Field Lok	CSA B182.2
4" - 24"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Metric Tyton	CSA B182.2
80 mm - 1200 mm
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Rest MJ (PVC)	CSA B182.2
4" - 12"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Rieber IPS	CSA B182.2
1.5" - 24"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Tyton	CSA B182.2
3" - 64"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Tyton CM	CSA B182.2
3" - 42"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 Sure Stop Gasket	CSA B182.2
4" - 36"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.
Gaskets¢ [1]	NBR	NBR HT4537 FIELD LOK 350	CSA B182.2
4" - 36"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Product is Certified as meeting the elastomeric gasket requirements of CSA B182.2.

Sasol Chemicals (USA) LLC
12120 Wickchester Lane
Houston, TX 77079
United States
281-588-3000

Facility : Houston, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Combination Ingredient Package+ [3] [4] [14]	SASOLWAX LP6530NA	1.53 - 2.30
Paraffin Wax Functional Equivalent+ [1]	Sasolwax B52	0.6 - 1.1
Functionally Equivalent Ingredient Package+ [2] [3] [4] [5]	Sasolwax LP210	1.18 - 2.17
Functionally Equivalent Ingredient Package+ [2] [3] [4] [6]	Sasolwax LP220	1.20 - 1.88
Functionally Equivalent Ingredient Package+ [2] [3] [4] [7]	Sasolwax LP230	1.13 - 1.89
Paraffin Wax Functional Equivalent+ [2] [3] [8]	Sasolwax P100	0.60 - 1.0
Paraffin Wax Functional Equivalent+ [2] [3] [8]	Sasolwax P200	0.60 - 1.0
Functionally Equivalent Ingredient Package+ [2] [3] [4] [9]	Sasolwax P212	0.90 - 1.15
Functionally Equivalent Ingredient Package+ [2] [3] [4] [13]	Sasolwax P217	1.0 - 1.2
Combination Ingredient Package+ [3] [4] [11]	Sasolwax P410	0.68 - 1.70
Combination Ingredient Package+ [3] [4] [12]	Sasolwax P420	0.73 - 1.66
Combination Ingredient Package+ [3] [4] [10]	Sasolwax P425	0.80 - 2.0
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified to NSF/ANSI 14 and also approved in Table 4B of the PPI PVC Range Composition. Approved for a use range of 0.6 - 1.1 phr. [2] Cannot be used with other functional equivalent ingredients. [3] Use of this ingredient in NSF Certified products requires prior authorization from NSF, unless user is an authorized holder of the PPI PVC Range Composition. [4] For PPI PVC Range Composition holders, see the PPI PVC Range Composition for individual ingredient contributions. Additional amounts of other ingredients can be added, but the total combined percentage cannot exceed 100% of the allowable phr. [5] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.18 - 2.17 phr. [6] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.20 - 1.88 phr. [7] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.13 - 1.89. [8] Certified to NSF/ANSI 14 and also approved in Table 4B of the PPI PVC Range Composition. Approved for a use range of 0.60 - 1.0 phr. [9] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 0.90 - 1.15 phr. [10] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.80 - 2.0 phr. [11] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.68 - 1.70 phr. [12] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use range of 0.73 - 1.66 phr. [13] Certified to NSF/ANSI 14 and also approved in Table 10B of the PPI PVC Range Composition. Approved for a use range of 1.0 - 1.2 phr. [14] Certified to NSF/ANSI 14 and also approved in Table 10A of the PPI PVC Range Composition. Approved for a use level of 1.53 - 2.30 phr.

Shintech Inc.
5618 Highway 332 East
Freeport, TX 77541
United States
979-233-7861

Facility : Freeport, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
PVC Resin+ [1] [2]	S6704	100
PVC Resin+ [1] [2]	SE-1100	100
PVC Resin+ [1] [2]	SE-950	100
PVC Resin+ [1] [2]	SE-950EG	100
PVC Resin+ [1] [2]	SE-950W	100
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Certified to NSF/ANSI 14 and also approved in Table 1 of the PPI PVC Range Composition. Approved for a use range of 100 phr. [2] Use of this ingredient in NSF Certified products requires prior authorization from NSF, unless user is an authorized holder of the PPI PVC Range Composition.

Solstice Advanced Materials
115 Tabor Road
Morris Plains, NJ 07950
United States
888-743-6243
573-474-8435

Facility : Orange, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Polyethylene Wax Functional Equivalent+ [1] [2] [3]	A-C 307	0.50
Polyethylene Wax Functional Equivalent+ [1] [2] [3]	A-C 307A	0.50
Polyethylene Wax Functional Equivalent+ [1] [2] [3]	A-C 316	0.50
Polyethylene Wax Functional Equivalent+ [1] [2] [3]	A-C 316A	0.50
Polyethylene Wax+	A-C® 629	0.50
Polyethylene Wax+	A-C® 629A	0.50
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Cannot be used with other functional equivalent ingredients. [2] Use of this ingredient in NSF Certified product requires authorization from NSF, unless user is an authorized holder of the PPI PVC Range Composition. [3] Certified to NSF/ANSI 14 and also approved in Table 5B of the PPI PVC Range Composition. Approved for a use range of 0.0 - 0.50 phr.

Tex-Trude Pipe Co., LLC.
2009 Sheldon Road
P.O. Box 1759
Channelview, TX 77530
United States
281-864-5219

Facility : Channelview, TX

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + ^*	PE	NEXT-PIPE L-23	ASTM F714
IPS - 4", 6", 8", 10", 12", 14",16", 18", 20", 24" SDR 7
IPS - 28", 32", 36", 42" SDR 7[1]
IPS -4", 6", 8", 10", 12", 14", 16", 18", 20", 24" SDR 9
IPS - 20", 24", 28", 32", 36" SDR 9
IPS - 42" SDR 9[1]
IPS - 4", 6", 8", 10", 12", 14", 16", 18" SDR 11, 13.5, 17, 21
IPS - 20", 24", 28", 32", 36", 42" SDR 11, 13.5, 17, 21
DIPS -4",6”, 8”, 10”, 12”, 14", 16”, 18”, 20”, 24" SDR 7
DIPS - 28", 32", 36" SDR 7[1]
DIPS -4",6”, 8”, 10”, 12”, 14", 16”, 18”, 20”, 24" SDR 9
DIPS - 28", 32", 36" SDR 9[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 11
DIPS - 20”, 24", 36" SDR 11
DIPS - 28", 32" SDR 11[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18" SDR 13.5
DIPS - 20”, 24", 36" SDR 13.5
DIPS - 28", 32" SDR 13.5[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 17
DIPS - 20”, 24", 36" SDR 17
DIPS - 28", 32" SDR 17[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 21
DIPS - 20”, 24", 36" SDR 21
DIPS - 28", 32" SDR 21[1]
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + ^*	PE	NEXT-PIPE L-23	AWWA C906
IPS - 4", 6", 8", 12", 14", 20", 24" SDR 7, 9, 11, 13.5, 17, 21
IPS - 28", 32", 36", 42" SDR 7[1]
IPS - 4", 6", 8", 12", 14", 20", 24", 28", 32" SDR 9
IPS - 36", 42" SDR 9[1]
IPS - 4",6",8",12",14",20",24",28",32",36",42" SDR 11, 13.5, 17, 21
DIOD - 4",6",8",10",12",14",16",18",20",24" SDR 7
DIOD - 28", 32", 36" SDR 7[1]
DIOD - 4",6",8",10",12",14",16",18",20",24" SDR 9
DIOD - 28", 32", 36" SDR 9[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",36" SDR 11
DIOD - 28", 32" SDR 11[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",36" SDR 13.5
DIOD - 28", 32" SDR 13.5[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",36" SDR 17
DIOD - 28", 32" SDR 17[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",36" SDR 21
DIOD - 28", 32" SDR 21[1]
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + ^*	PE	NEXT-PIPE CP-23	ASTM F714
IPS - 4", 6", 8", 10", 12", 14",16", 18", 20", 24" SDR 7
IPS - 28", 32", 36", 42" SDR 7[1]
IPS -4", 6", 8", 10", 12", 14", 16", 18", 20", 24" SDR 9
IPS - 20", 24", 28", 32", 36" SDR 9
IPS - 42" SDR 9[1]
IPS - 4", 6", 8", 10", 12", 14", 16", 18" SDR 11, 13.5, 17, 21
IPS - 20", 24", 28", 32", 36", 42" SDR 11, 13.5, 17, 21
DIPS -4",6”, 8”, 10”, 12”, 14", 16”, 18”, 20”, 24" SDR 7
DIPS - 28", 32", 36" SDR 7[1]
DIPS -4",6”, 8”, 10”, 12”, 14", 16”, 18”, 20”, 24" SDR 9
DIPS - 28'', 32'', 36" SDR 9[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 11
DIPS - 20”, 24", 36" SDR 11
DIPS - 28'', 32'' SDR 11[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18" SDR 13.5
DIPS - 20”, 24", 36" SDR 13.5
DIPS - 28'', 32'' SDR 13.5[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 17
DIPS - 20”, 24", 36" SDR 17
DIPS - 28'', 32'' SDR 17[1]
DIPS - 4", 6”, 8”, 10”, 12”, 14", 16”, 18” SDR 21
DIPS - 20”, 24", 36" SDR 21
DIPS - 28'', 32'' SDR 21[1]
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + ^*	PE	NEXT-PIPE CP-23	AWWA C906
IPS - 4", 6", 8", 12", 14", 20", 24" SDR 7, 9, 11, 13.5, 17, 21
IPS - 28", 32", 36", 42" SDR 7[1]
IPS - 4", 6", 8", 12", 14", 20", 24", 28", 32" SDR 9
IPS - 36", 42" SDR 9[1]
IPS - 4",6",8",12",14",20",24",28",32",36",42" SDR 11, 13.5, 17, 21
DIOD - 4",6",8",10",12",14",16",18",20",24" SDR 7
DIOD - 28", 32", 36" SDR 7[1]
DIOD - 4",6",8",10",12",14",16",18",20",24" SDR 9
DIOD - 28", 32", 36" SDR 9[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",36" SDR 11
DIOD - 28", 32" SDR 11[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",36" SDR 13.5
DIOD - 28", 32" SDR 13.5[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",36" SDR 17
DIOD - 28", 32" SDR 17[1]
DIOD - 4",6",8",10",12",14",16",18",20",24",36" SDR 21
DIOD - 28", 32" SDR 21[1]
[1] Special sizes may be acceptable for engineered applications, due to system conditions or special local requirements. It is the responsibility of the end user to ensure the product is suitable for the intended application. * This product is intended for use only on water supplies that have been shown to be at or below the referenced concentration and valency of arsenic. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73°F. ^ Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Texas United Pipe, Inc.
P.O. Box 41067
Houston, TX 77241
United States
281-448-3276

Facility : Houston, TX

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe*	PVC	TUP	ASTM D2665
1 1/4" - 8" Sch 40
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe + [G]*	PVC	TUP	ASTM D1785
1/2" - 8" Sch 40
1/2" - 8" Sch 80
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe + [G]*	PVC	TUP	ASTM D2241
1/2" - 4" SDR 13.5
3/4" - 6" SDR 17
3/4" - 8" SDR 21
1 1/4" - 8" SDR 26
1 1/4" - 8" SDR 32.5
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Well Casings

Product Type	Material Type	Trade Name	Product Standard
Well Casings[G]	PVC	TUP	ASTM F480
2" - 8" Sch 40
2" - 8" Sch 21
4" - 8" SDR 26
4" - 8" SDR 32.5
4" - 8" SDR 17
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Valtris Specialty Chemicals
7500 East Pleasant Valley Road
Independence, OH 44131
United States
216-750-6761

Facility : Fort Worth, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Calcium Stearate+	Synpro® Calcium Stearate 114-40	1.5
Calcium Stearate+	Synpro® Calcium Stearate 114-40 VEG	1.5
Calcium Stearate+	Synpro® Calcium Stearate 12B	1.5
Calcium Stearate+	Synpro® Calcium Stearate 12B VEG	1.5
Calcium Stearate+	Synpro® Calcium Stearate 15F	1.5
Calcium Stearate+	Synpro® Calcium Stearate 15F GL	1.5
Calcium Stearate+	Synpro® Calcium Stearate 15F GL VEG	1.5
Calcium Stearate+	Synpro® Calcium Stearate 15F VEG	1.5
Calcium Stearate+	Synpro® Calcium Stearate 92	1.5
Calcium Stearate+	Synpro® Calcium Stearate 92 VEG	1.5
Calcium Stearate+	Synpro® Calcium Stearate 95	1.5
Calcium Stearate+	Synpro® Calcium Stearate 95 VEG	1.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Westlake Longview Corporation
P.O. Box 8388
Longview, TX 75607
United States
903-242-7682
Visit this company's website

Facility : Longview, TX

Ingredient Suppliers

Product Type	Trade Name	Max Use Level (phr)
Polyethylene Wax+	Epolene E-14P	0.5
Polyethylene Wax+	Epolene E-14	0.5
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Westlake Pipe & Fittings Corporation
The Westlake Center
2801 Post Oak Boulevard, Suite 650
Houston, TX 77056
United States
800-999-7473
713-585-2621

Facility : Wichita Falls, TX

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe[1]	PVC	Westlake Pipe & Fittings	ASTM D2665
1 1/4" - 12" Sch 40
[1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D1785
1/2" - 16" Sch 40
1/2" - 16" Sch 80
1/2" - 12" Sch 120
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [1] [2] [G]	PVC	Westlake Pipe & Fittings	ASTM D2241
1/2" - 6" SDR 13.5
>= 3/4" SDR 17
>= 3/4" SDR 21
>= 1" SDR 26
>= 1" SDR 32.5
>= 3" SDR 41
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] Product may also be marked with trade designation Westlake Canada, Inc. DBA Westlake Pipe & Fittings. [2] Sockets and gasketed bell ends are not tested or Listed by NSF for this production facility. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

WL Plastics Corporation
3575 Lone Star Circle
Suite 300
Fort Worth, TX 76177
United States
682-831-2727
Visit this company's website

Facility : # 2 Lubbock, TX

Gas Applications - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe§	PE 2708	WL Plastics LBB/WLP LBB	ASTM D2513
1/2" CTS 0.090 WALL
3/4" CTS 0.090 WALL
1" CTS 0.090 WALL, 0.099 WALL, 0.101 WALL
1-1/4" CTS 0.062 WALL, 0.090 WALL, 0.121 WALL SDR 9.3
1/2" IPS SDR 9, 9.3, 9.33, 11
3/4" IPS SDR 11
1" IPS SDR 10, 11
1-1/4" IPS SDR 10, 11
1-1/2" IPS SDR 11
2" IPS SDR 11, 11.5, 13.5
3" IPS SDR 9, 11, 11.5, 13.5
4" IPS SDR 9, 11, 11.5, 13.5, 17
6" IPS SDR 9, 11, 11.5, 13.5, 17
8" IPS SDR 9, 11, 11.5, 13.5, 17
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe§	PE 4710	WL Plastics LBB/WLP LBB	ASTM D2513
1/2" CTS 0.090 WALL
3/4" CTS 0.090 WALL
1" CTS 0.090 WALL, 0.099 WALL, 0.101 WALL, 0.121 W
1-1/4" CTS 0.090 WALL, 0.121 WALL
3/4" IPS SDR 7.3, 9, 11
1" IPS SDR 7, 7.3, 9, 11
1-1/4" IPS SDR 7, 7.3, 9, 10, 11
1-1/2" IPS SDR 7, 7.3, 9, 11
2" IPS SDR 7, 7.3, 9, 11, 13.5, 15.5, 17
3" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17
4" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17
6" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17
8" IPS SDR 7, 7.3, 9, 11, 11.5, 13.5, 15.5, 17
10" IPS SDR 7, 9, 11, 13.5, 15.5, 17
12" IPS SDR 7, 9, 11, 13.5, 15.5, 17
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Zurn PEX, Inc.
116 Maple Street
Commerce, TX 75428
United States
903-886-2580
Visit this company's website

Facility : Commerce, TX

Fire Sprinkler Pipe and Fitting Systems

Product Type	Material Type	Trade Name	Product Standard
Pipe and Fitting System% * [G]*	PEX	Zurn PEX Fire Protection System	ANSI/CAN/UL 1821
Tubing
1" White ZurnPEX
% PEX pipe and fittings are intended for use in multi-purpose piping systems of residential occupancies as defined in ANSI/NFPA 13D, "Installation of Sprinkler Systems in One- and Two- Family Dwellings and Manufactured Homes" and the International Residential Code, Section 2904, and are designed to withstand a working pressure of not less than 130 psi at 120° F. PEX pipe and fittings are intended to be installed in accordance with the requirements specified in the manufacturer’s installation instructions and ANSI/NFPA 13D. Protection is intended to be provided for PEX pipe and fittings in multi-purpose piping systems. The minimum protection should consist of either (1) one layer of 3/8-in. gypsum wallboard, (2) a suspended membrane ceiling with lay-in panels or tiles having a weight of not less than 0.35 lbs per sq ft when installed with metallic support grids, (3) 1/2 in plywood or (4) other material with a 15 minute fire rating. PEX pipe and fittings are intended for use in areas where the maximum ambient temperature does not exceed 120° F. These pipe and fittings are not intended to be installed in outdoor applications. The PEX pipe and fittings are intended for use in wet-pipe systems only and have not been evaluated for use in dry-pipe systems. ** Pipe and fittings Certified as a system using Installation/assembly instructions titled "Zurn PEX Residential Fire Protection Addendum to Plumbing Installation Guide", dated October 2010. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing& ^ ¢ § +++ [G]	PEX 5306	ACCUTEK PEX - Blue, Red, White	ASTM F876/F877
1/8” – 2” SDR 9
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing^ ¢ § +++ [G]	PEX 5306	ACCUTEK PEX - Blue, Red, White	AWWA C904
1/2" – 1 1/4" SDR 9
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ¢ § +++ [G]	PEX	ACCUTEK PEX - Blue, Red, White	CSA B137.5
1/8” – 2" SDR 9
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ¢ § +++ [G]	PEX 5306	CAST Fast-Fit - Blue, Red, White	ASTM F876/F877
1/8” – 2” SDR 9
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing^ ¢ § +++ [G]	PEX 5306	CAST Fast-Fit - Blue, Red, White	AWWA C904
1/2" – 1 1/4" SDR 9
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ¢ § +++ [G]	PEX	CAST Fast-Fit - Blue, Red, White	CSA B137.5
1/8” – 2” SDR 9
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ¢ § +++ [G]	PEX 5306	QEST®PEX - Blue, Red, White	ASTM F876/F877
1/8” – 2” SDR 9
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing^ ¢ § +++ [G]	PEX 5306	QEST®PEX - Blue, Red, White	AWWA C904
1/2" – 1 1/4" SDR 9
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ¢ § +++ [G]	PEX	QEST®PEX - Blue, Red, White	CSA B137.5
1/8” – 2” SDR 9
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ¢ § +++ [G]	PEX 5306	WarmPEX - Red	ASTM F876/F877
1/8” – 2" SDR 9
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing^ ¢ § +++ [G]	PEX 5306	WarmPEX – Red	AWWA C904
1/2" – 1 1/4" SDR 9
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ¢ § +++ [G]	PEX	WarmPEX - Red	CSA B137.5
1/8” – 2” SDR 9
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing& ^ ¢ § +++ [G]	PEX 5306	ZURNPEX - Blue, Red, White	ASTM F876/F877
1/8” – 2”
& Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing^ ¢ § +++ [G]	PEX 5306	ZURNPEX - Blue, Red, White	AWWA C904
1/2" – 1 1/4" SDR 9
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing# & ^ ¢ § +++ [G]	PEX	ZURNPEX - Blue, Red, White	CSA B137.5
1/8” – 2” SDR 9
# Pipe tested as a system using QEST®PEX fittings manufactured by United States Brass Corporation. Installation/assembly instructions titled "QEST®PEX Professional PEX Plumbing System Installation Guide", dated September 1995. & Tubing certified against CSA B137.5 and ASTM F876/F877 shall include the standard designation(s) of the fitting system(s) for which the tubing is recommended by the manufacturer, and shall be marked, as applicable, with the following fitting system designation(s): ASTM F1807, ASTM F2159, ASTM F1960, and ASTM F2098. ^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with ASTM 2023. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

MP
Mechanical Plumbing Products

BLUCHER Metal A/S
Pugdalvej 1
7480 Vildbjerg
Denmark
45 99 92 08 00
Visit this company's website

Facility : Fort Worth, TX

Product Type	Material Type	Trade Name	Product Standard
Trench Drains§	MLTPL	Blucher	ASME A112.6.3
670 Series 6" Wide Pre-Sloped Trench Drains[2]	670 Series 6" Wide Pre-Sloped Trench Drains[2]	671 Series 6" Wide Pre-Sloped Trench Drains[2]	672 Series 6" Wide Pre-Sloped Trench Drains[2]
676 Series HygienicPro Trench Drain[1]	BHG Series - HygienicPro Trench Drain[1]	BT12[2]	BT6[2]
BT6-0[2]	BTV6[2]
[1] BHG Series Round Drains w/ trench drain approved for bottom and side outlet sizes 4". [2] Series BT Trench Drains- All grates have a maximum pipe outlet size of 6'', with the exception of BT6-SH6, which has a maximum pipe outlet size of 5". Standard grate option is 1’' mesh, which includes the following grates: BTG-M6 (Heavy Duty) BTG-M8 (Heavy Duty) BTG-M12 (Medium Duty) Suffixes indicating alternate grate options: -HG - Hygenic-Pro Grating, which includes the following grates: BTG-H6 (Heavy Duty) BTG-H8 (Heavy Duty) -LG = Ladder Grating, which includes the following grates: BTG-L6 (Heavy Duty) BTG-L8 (Heavy Duty) -SG - Slot Grating, which includes the following grates: BTG-S6 (Heavy Duty) BTG-S8 (Heavy Duty) -SH - Shower Grating, which includes the following grates: BT6-SH6 (Light Duty) -XLG - Extra Heavy Duty Ladder Grating, which includes the following grates: BTG-XL6 (Extra Heavy Duty) BTG-XL8 (Extra Heavy Duty) BTG-XL12 (Extra Heavy Duty) Additional model options: -316 - Type 316 Stainless Steel -B - Sediment Basket -E - Edge Infill -FC - Outlet w/ Flashing Flange & Clamp -LD - Grate Locking Device -P - Stainless Steel P - Trap -O - Outlet Box § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

Zurn Water, LLC
1801 Pittsburgh Avenue
Erie, PA 16502
United States
814-875-1376
Visit this company's website

Facility : Caddo Mills, TX

Product Type	Material Type	Trade Name	Product Standard
Cleanouts§	SS	Cleanout Cover	ASME A112.36.2/CSAB79.2
1/2" thick cover (7 3/4" x 7 3/4")#
# Certified for 3" and 4" outlet sizes with a load classification of Extra Heavy Duty. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Commercial Floor Drains §*	SS	Z1805 Series	ASME A112.6.3
[A]1805-12B-[C]-[D]-[E]
12" Diameter Round Sanitary Floor Drain
[A]1805-12S-[C]-[D]-[E]
12" Square Sanitary Floor Drain
* Product Nomenclature: [A] - Stainless Steel Type Z - Type 304 Stainless Steel ZM - Type 316 Stainless Steel [C] - Outlet Size and Type 3NH - 3" No-Hub 4NH - 4" No-Hub 6NH - 6" No-Hub 3BW - 3" Butt-Weld 4BW - 4" Butt-Weld 6BW - 6" Butt-Weld [D] - Grate/Cover Options -H3 (with 3" outlets only) - Special Duty Perimeter Gap Grate -H5 - Extra Heavy Duty Slotted Grate -H9 (with 3" and 4" outlets only) - Medium Duty Perforated Grate [E] - Miscellaneous Options -K - Anchor Flange -KC - Anchor Flange with Seepage Holes & Clamp Collar -MG - EZ Lock Magnetic System with Secured Secondary Strainer -P - 3/4 Trap Primer Connection -VP - Vandal Proof Secured Top § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Commercial Floor Drains ¢ §*	SS	Z1805 Series	CSA B79
[A]1805-12B-[C]-[D]-[E]
12" Diameter Round Sanitary Floor Drain
[A]1805-12S-[C]-[D]-[E]
12" Square Sanitary Floor Drain
* Product Nomenclature: [A] - Stainless Steel Type Z - Type 304 Stainless Steel ZM - Type 316 Stainless Steel [C] - Outlet Size and Type 3NH - 3" No-Hub 4NH - 4" No-Hub 6NH - 6" No-Hub 3BW - 3" Butt-Weld 4BW - 4" Butt-Weld 6BW - 6" Butt-Weld [D] - Grate/Cover Options -H3 (with 3" outlets only) - Special Duty Perimeter Gap Grate -H5 - Extra Heavy Duty Slotted Grate -H9 (with 3" and 4" outlets only) - Medium Duty Perforated Grate [E] - Miscellaneous Options -K - Anchor Flange -KC - Anchor Flange with Seepage Holes & Clamp Collar -MG - EZ Lock Magnetic System with Secured Secondary Strainer -P - 3/4 Trap Primer Connection -VP - Vandal Proof Secured Top ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Floor Drains§	SS	Food Service Drains	ASME A112.6.3/CSAB79.3
1/4" Slotted 10" diameter%
1/2" Slotted 10" diameter#
10 Gauge Perforated 10" diameter&
% Certified for 3" and 4" outlet sizes with a load classification of Heavy Duty. # Certified for 3" and 4" outlet sizes with a load classification of Extra Heavy Duty. & Certified for 3" and 4" outlet sizes with a load classification of Light Duty. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems

Baystar - Bayport Polymers LLC
12212 Port Road
Pasadena, TX 77507
United States
281-474-6000
Visit this company's website

Facility : Pasadena, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710	HDPE 4920B	ASTM D3350 445574C
Material	PE 4710	HDPE 4920N/BLK	ASTM D3350 445574C

Chevron Phillips Chemical Company, LP
9500 Lakeside Blvd.
The Woodlands, TX 77381
United States
832-813-4100
Visit this company's website

Facility : Sweeny, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type		Material Type		Trade Name		Product Standard
Material		PE 4710		Marlex® TRB-432 BK		ASTM D3350 445574C

Dow Chemical Company (The)
Regulatory Compliance
1803 Building
Midland, MI 48674
United States
979-238-5209
Visit this company's website

Facility : North Seadrift, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type		Material Type		Trade Name		Product Standard
Material		PE 3608		CONTINUUM™ DGDB-2480 Black		ASTM D3350 345464C

Equistar Chemicals, LP, a wholly-owned subsidiary of LyondellBasell
Polymers Division
1221 McKinney Street, Suite 1600
P.O. Box 2583
Houston, TX 77252-2583
United States
713-652-7200
Visit this company's website

Facility : Bay City, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type		Material Type		Trade Name		Product Standard
Material		PE 4710		Alathon® L4904 Black		ASTM D3350 445574C

Facility : La Porte, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710 PLUS	Hyperzone HY4008 Black	ASTM D3350 445584C
Material	PE 4710	Hyperzone HY4008LSC Black	ASTM D3350 445574C

Formosa Plastics Corporation, Texas
201 Formosa Drive
P.O. Box 700
Point Comfort, TX 77978
United States
361-987-7960

Facility : Point Comfort, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710	E6210A-MD53542	ASTM D3350 445576C
Material	PE 4710	E6210A-PO2107	ASTM D3350 445576C
Material	PE 4710	E6210A BL	ASTM D3350 445576C
Material	PE 4710	E6210C BLK	ASTM D3350 445574C
Material	PE 4710	E6210C BLK2	ASTM D3350 445574C
Material	PE 4710	E6210F2 BLK	ASTM D3350 445574C
Material	PE 4710	E6210F2 BLK2	ASTM D3350 445574C

Ineos Olefins and Polymers USA, a Division of Ineos USA LLC.
Marina View Building
2600 South Shore Boulevard
Suite 500
League City, TX 77573
United States
800-338-0489
713-307-3760
Visit this company's website

Facility : La Porte, TX

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Material	PE 4710	Tub 121	ASTM D3350 445574C
Material	PE 3608	K44-15-123	ASTM D3350 345464C

NSF 468
Plumbing Supply Components for Export

BrassCraft Manufacturing Co.
39600 Orchard Hill Place
Novi, MI 48375
United States
248-305-6000

Facility : Lancaster, TX

*Valves[1] [2] [3] [4]*
BrassCraft G2BSP88 C1	BrassCraft G2BSP98 C1	BrassCraft O3301	BrassCraft O3305
BrassCraft OCR19	BrassCraft OR07	BrassCraft OR12	BrassCraft OR15
BrassCraft OR17	BrassCraft OR37	BrassCraft R1501LR	BrassCraft R1701LR
BrassCraft R1701LR1	Coflex IP100	Coflex IP102	Coflex IP104
Coflex IP106	Coflex IP108	Coflex IP110	Coflex IP120
Coflex IP122	Coflex IP124	Coflex IP126	Coflex IP128
Coflex IP130
[1] Products not intended for use in the U.S. & Canada. [2] All models meet the performance requirements of ASME A112.18.1/CSA B125.1. [3] F/G Coflex is identical to F/G BrassCraft with the exception of the handle markings. [4] F/G BrassCraft suffix options: Finish: C - Chrome plated R - Uplated brass Packaging: 1 - Individually boxed B - Bulk packaging P - Polybag May be followed by 1 or 2 alpha characters indicating languages on packaging. Assy: L1/OR1 - Less 3/8 OD comp. nut and ring L4 - Less 1/2 nom. comp. nut and ring LN or N - Assy less all nuts and rings T - Sold less the individual packaging tray. May be preceded by number indicating quantity (example: 100T) Z - Brass stem when not standard General: Above suffixes may be used in combination. Above options may include a #### indicating pack quantity.

Fabricated Ductile Iron Pipe
NAPF QualityPlus™ Certification Program

National Association of Pipe Fabricators
2313 Northeast 160th Loop
Vancouver, WA 98684
United States
205-706-0886
Visit this company's website

Facility : U.S. Pipe Fabrication San Antonio, TX

Product Type	Material Type	Trade Name	Product Standard
Pipe	Ductile Iron	U.S. Pipe	AWWA C115
Flanged Ductile Iron Pipe
3" - 64"
Pipe	Ductile Iron	U.S. Pipe	AWWA C606
Grooved / Shouldered Joint Pipe
3" - 64"

NOTE: 3" - 54" product is also Certified to NSF/ANSI/CAN 61 for drinking water applications.
NOTE: Certification applies to grooved and/or flanged pipe only. Certification does not cover
      the design or rating of couplings or hydrostatic joint tests. Pipe may be flanged on one
      end and grooved on the other. In this case, pipe is Certified to both AWWA C115 and AWWA
      C606.

Number of matching Manufacturers is 51
Number of matching Products is 1538
Processing time was 0 seconds

Product Type

Material Type

Trade Name

Product Standard

Pipe# + [G]

J-M Manufacturing

PC 165: 16"

PC 235: 6", 8", 10", 12"

PC 305: 6", 8"

# This product may be marked with an alternate trade name: J-M Manufacturing, PW Eagle, [JMM Logo] or [JM Eagle Logo]. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.