NSF Product and Service Listings

NSF Product and Service Listings

Did you know?

Connect with NSF

These NSF Official Listings are current as of Saturday, April 4, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=ASTM+D2737&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Advanced Drainage Systems, Inc.
4640 Trueman Boulevard
Hilliard, OH 43026
United States
800-733-7473
614-658-0050
Visit this company's website

Facility : Bakersfield, CA

Potable Water - Pipe and Fittings

Facility : Vicksburg, MS

Potable Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Harrisonville, MO

Potable Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Findlay, OH

Potable Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : London, OH

Potable Water - Pipe and Fittings

Facility : Ennis, TX

Potable Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Centennial Plastics, Inc.
1830 Centennial Avenue
P.O. Box 329
Hastings, NE 68901
United States
866-851-2227
402-462-2227
Visit this company's website

Facility : Nampa, ID

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ §	PE 3608/4710	CenCore HDPE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.
Pipe+ §	PE 3608/4710	CenFlo HDPE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Hastings, NE

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ § [1] [G]	PE 3608/4710	CenCore HDPE CTS	ASTM D2737
1/2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenCore HDPE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CenFlo HDPE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ § [G]	PE 3608/4710	CPL HDPE CTS	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes are not certified for use in potable water applications containing oxidizing disinfectants and shall not be marked with a CC oxidative resistance classification. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Cresline Plastic Pipe Co., Inc.
600 Cross Pointe Boulevard
Evansville, IN 47715
United States
270-826-8317

Facility : Council Bluffs, IA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing+ [G]	PE 4710	Cresline® HD-CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Henderson, KY

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® HD-CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Mechanicsburg, PA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing+ [G]	PE 4710	Cresline® CE Blue®	ASTM D2737
3/4" - 2" SIDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Tubing+ [G]	PE 4710	Cresline® HD-CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Endot Industries, Inc.
60 Green Pond Road
Rockaway, NJ 07866
United States
800-443-6368
973-625-8500
Visit this company's website

Facility : Rockaway, NJ

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing + [G]*	PE 3608/4710	Endot	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * The trade designation "Endot" may or may not be followed by any of the following designations: ENDOPLUS, ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM, GOLDEN JET, SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY, ENDOT/YARDLEY, ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Pryor Creek, OK

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing + [G]*	PE 3408/4710	Endot	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * The trade designation "Endot" may or may not be followed by any of the following designations: ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM, GOLDEN JET, SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY, ENDOT/YARDLEY, ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Greeneville, TN

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing + [G]*	PE 3408/4710	Endot	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. * The trade designation "Endot" may or may not be followed by any of the following designations: ENDOPLUS, ENDOPOLY, ENDOPURE, ENDOTRACE, EN-DUO-PLEX, GEOFLEX-GEOTHERMAL, PREMIUM, GOLDEN JET, SUPER GOLDEN JET, BLACK DIAMOND, ORANGEBURG SP, ORANGEBURG SUPER POLY, ENDOT/YARDLEY, ENDOT/ORANGEBURG, DUAL-LIST, or Endot Logo. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Flying W Plastics Inc.
487 Vanhorn Drive
P.O. Box 759
Glenville, WV 26351
United States
304-462-5779
Visit this company's website

Facility : Glenville, WV

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	FLYING W TITAN BLUE CTS	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and
    are not certified for use in applications where an oxidative resistance classification
    (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required.
[2] Special sizes may be acceptable for engineered applications, due to system conditions or
    special local requirements. It is the responsibility of the end user to ensure the
    product is suitable for the intended application.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Interstate Plastic, Inc.
P.O. Box 398
Post Falls, ID 83854
United States
208-773-4538

Facility : Post Falls, ID

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ + [G]	PE 3608/4710	INTERSTATE	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 3608/4710	Interstate Super Service Blue	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

IPEX Incorporated
3 Place Du Commerce, Suite 101
Île-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ [G]	PE 4710	IPEX Inc	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are NSF Certified.

IPEX USA LLC
3 Place Du Commerce, Suite 101
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Asheville, NC

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ [G]	PE 4710	Sil-O-Flex	ASTM D2737
1/2" SDR 9[2]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe+ [G]	PE 4710	Ultra-Pure	ASTM D2737
1/2" SDR 9[2]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[2]
[2] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

J-M Manufacturing Co., Inc. DBA JM Eagle
9 Peach Tree Hill Road
Livingston, NJ 07039
United States
310-693-8200
Visit this company's website

Facility : # 1 Adel, GA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 7 Hastings, NE

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [3] [G]	PVC	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
3/4" - 2" SDR 7.3
1/2" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [3] Complies with US EPA Maximum Contaminant Levels (MCLs) for PFAS according to NSF/ANSI/CAN 61. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 8 Kingman, AZ

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 9 Magnolia, AR

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 11 Cochranton, PA

Potable Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 15 Sunnyside, WA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Manufacturing	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe^	PE 4710	J-M Manufacturing	ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline.

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 17 Tulsa, OK

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ § [G]	PE 4710	J-M Eagle	ASTM D2737
1/2" SDR 7.3[1]
1/2" SDR 9[1]
1/2" - 2" SDR 11[1]
3/4" - 2" SDR 7.3
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ This product may be marked with an alternate trade name: JM Eagle, [JM Eagle Logo], [JMM Logo], JM Eagle Poly-Flo, JM Eagle-Tough Turf Irrigation Pipe, JM Eagle Geo-Flo, and/or JM Eagle-Tough Turf Mainline. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark are Certified.

Reclaimed Water - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Sewer Main - Pipe and Fittings

NOTE: Only products bearing the NSF Mark are Certified.

Numex Plastics, Inc.
3505 S. Main Street
P.O. Box 1697
Roswell, NM 88202-1697
United States
575-622-2070

Facility : Roswell, NM

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 3608/4710	NUMEX	ASTM D2737
1/2" SDR 9[1]
3/4" - 2" SDR 9
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (CC1, CC2, CC3) in accordance with ASTM D3350 is required. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

NuMex Plastics, Inc.
3505 South Main Street
Roswell, NM 88203
United States
575-622-2070

Facility : # 1 USA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ [G]	PE 4710	NuMex	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Pipe$ + [G]	PE 4710	Super Service Blue CTS	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Oil Creek Plastics
East Titusville Road
P.O. Box 385
Titusville, PA 16354
United States
800-537-3661
814-827-3661
Visit this company's website

Facility : Titusville, PA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing$ +	PE 3608/4710	Oil Creek Aqua-Jet (CTS)	ASTM D2737
3/4" - 2" SDR 9
$ These products also meet the requirements for PE 3408 per ASTM D3350-02a. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Tubing+	PE 3608/4710		ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 3608/4710	Aqua-Blue	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Poly Technology (Polytech)
(A Granse Company)
Airlake Industrial Park
21670 Hamburg Avenue
Lakeville, MN 55044
United States
612-469-2198

Facility : Lakeville, MN

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing+ [1] [G]	PE 3608/4710	PolyTech	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [1] The pipe may also be designated with Excel, Blue Ultra, Geothermal, WSLP, Interwest, Excel Fusion or WSLP Fusion. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

$ This product also meets the requirements for PE 3408 pipe tested in accordance with ASTM
  3350-02a.

Polytubes 2009 Inc.
16221 - 123 Avenue
Edmonton, AB T5V 1N9
Canada
780-453-2211
Visit this company's website

Facility : Edmonton, Alberta, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ ++	PE 4710	PT D47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM D2737
1/2" - 5/8" SDR 7.3[1]
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D247	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	ASTM D2737
1/2" - 5/8" SDR 7.3[1]
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Facility : Peterborough, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe$ ++	PE 4710	PT D47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT BLUE47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D247	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D347	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT D447	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 4710	PT-I47	ASTM D2737
1/2" - 5/8" SDR 7.3
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).
Pipe$ ++	PE 3408/4710	PT-IB47	ASTM D2737
1/2" - 5/8" SDR 7.3[1]
3/4" - 2" SDR 7.3
1/2" - 5/8" SDR 9[1]
3/4" - 2" SDR 9
1/2" - 2" SDR 11[1]
[1] These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3) in accordance with ASTM D3350 is required. $ These products also meet the requirements for PE 3408 per ASTM D3350-02a. ++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F).

Qualpol, LLC
946 West Main
Jerome, ID 83338
United States
208-324-1314
Visit this company's website

Facility : Jerome, ID

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	QualPol Blue Water	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	QualPol Potable Water	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

Teel Plastics Inc.
1060 Teel Court
Baraboo, WI 53913
United States
608-355-3080
Visit this company's website

Facility : Baraboo, WI

Potable Water - Pipe and Fittings

Geothermal Applications

Viaflex, Inc.
821 West Algonquin Street
Sioux Falls, SD 57104
United States
605-335-0174
Visit this company's website

Facility : Brandon, SD

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+ ^ [G]	PE 4710	Viaflex Industrial Pipe	ASTM D2737
3/4" - 2" DR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ^ All sizes and wall thicknesses are listed to U.P Code. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe@ ^	PE 4710	Viaflex Industrial Pipe	ASTM D2737
3/4" - 2" DR 9
@ Certified for purple color. ^ All sizes and wall thicknesses are listed to U.P Code.

WL Plastics Corporation
3575 Lone Star Circle
Suite 300
Fort Worth, TX 76177
United States
682-831-2727
Visit this company's website

Facility : Titusville, PA

Potable Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe+	PE 4710	WL Plastics PA/WLP PA	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
Pipe+	PE 4710	WL Plastics PA/WLP PA Blue	ASTM D2737
3/4" - 2" SDR 9
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.

NSF/ANSI 358
Water-Based Ground-Source “Geothermal” Heat Pump Systems

Numex Plastics, Inc.
3505 S. Main Street
P.O. Box 1697
Roswell, NM 88202-1697
United States
575-622-2070

Facility : Roswell, NM

NSF/ANSI 358-1 Polyethylene Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Tubing	PE 4710	NUMEX Geothermal	ASTM D2737
1/2" - 2" SDR 9

Number of matching Manufacturers is 19
Number of matching Products is 215
Processing time was 0 seconds

Product Type

Material Type

Trade Name

Product Standard

Pipe+ [G]

PE 3608/4710

ADS PolyFlex

ASTM D2737

3/4" - 2" SDR 7.3

3/4" - 2" SDR 9

1/2" - 2" SDR 11*

* These pipe sizes shall not be marked with a CC oxidative resistance classification and are not certified for use in applications where an oxidative resistance classification (e.g. CC1, CC2, CC3), in accordance with ASTM D3350, is required.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.