% Certified for natural, red, white and blue material.
  Natural - PEX 5006
  Red, White, Blue - PEX 5308
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

% Certified for natural, red, white and blue material.
  Natural - PEX 5006
  Red, White, Blue - PEX 5308
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Product also meets the requirements of ASTM F877.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    3/4" EP Branch Multi-port Tee, 3 outlets, mz3-4x3i-ce_01
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling 1-1/4" , c5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling, 3/4" PEX x 1" PEX
    Coupling, 1/2" PEX x 3/4" PEX
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4" , e5-4-ce_01
    Elbow 2" , e2-ce_01
    Flow-through Multi-port Tee , 2 outlets, 3/4'' x 3/4'' ProPEX, mo3-4x2i-ce_01
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    Plug for 1/2" PEX	
    Plug for 3/4" PEX	
    Plug for 1" PEX	
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX	
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX	
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX	
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX			
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX	
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX	
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX
    Reducing Tee 1-1/4" x 1-1/4" x 1" , t5-4x5-4x1-ce_01
    Tee equal 1/2"-1/2"-1/2", T1-2_01
    Tee equal 3/4"-3/4"-3/4", T3-4_01
    Tee equal 1"-1"-1", T1_01
    Tee Equal 2", t2-ce_01
    Tee Equal 1-1/4'" t5-4-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Natural (Solid Wall) PEX Pipe Certified 3/8" - 2" sizes. Red, blue, white or orange PEX
  pipe (2 layer pipe - natural with colored adhesive pipe) certified for 3/8" - 1" sizes.
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable, with the following fitting system designation(s): ASTM F1960,
  ASTM F1807, ASTM F2159, and ASTM F2098.
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); and Barrier pipe
  (red, blue,white and orange) are certified for the following sizes: 3/8", 1/2", 5/8",
  3/4", 1'', 1 1/2", & 2".
  
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh),	applications only.				
  
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    
    3/4" EP Branch Multi-port Tee, 3 outlets, mz3-4x3i-ce_01
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling 1-1/4" , c5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling, 3/4" PEX x 1" PEX
    Coupling, 1/2" PEX x 3/4" PEX
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4" , e5-4-ce_01
    Elbow 2" , e2-ce_01
    Flow-through Multi-port Tee , 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    Plug for 1/2" PEX
    Plug for 3/4" PEX
    Plug for 1" PEX
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX
    Reducing Tee 1-1/4" x 1-1/4" x 1" , t5-4x5-4x1-ce_01
    Tee equal 1/2"-1/2"-1/2", T1-2_01
    Tee equal 3/4"-3/4"-3/4", T3-4_01
    Tee equal 1"-1"-1", T1_01
    Tee Equal 2", t2-ce_01
    Tee Equal 1-1/4" t5-4-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    
    3/4" EP Branch Multi-port Tee, 3 outlets, mz3-4x3i-ce_01
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling 1-1/4" , c5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling, 3/4" PEX x 1" PEX
    Coupling, 1/2" PEX x 3/4" PEX
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4" , e5-4-ce_01
    Elbow 2" , e2-ce_01
    Flow-through Multi-port Tee , 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    Plug for 1/2" PEX
    Plug for 3/4" PEX
    Plug for 1" PEX
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX
    Reducing Tee 1-1/4" x 1-1/4" x 1" , t5-4x5-4x1-ce_01
    Tee equal 1/2"-1/2"-1/2", T1-2_01
    Tee equal 3/4"-3/4"-3/4", T3-4_01
    Tee equal 1"-1"-1", T1_01
    Tee Equal 2", t2-ce_01
    Tee Equal 1-1/4" t5-4-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange) and Skinned (black
  plus red, blue, white, or orange) are certified for the following sizes: 3/8", 1/2",
  5/8", 3/4", 1", 1-1/4", 1-1/2" & 2"
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Monowall pipe (natural); Skinned pipe (red, blue, white and orange); Skinned (black plus
  red, blue, white, or orange), and Barrier pipe (red, blue, white and orange) are
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" & 2".
    
  Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable water
  distribution system.  This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

$ Certified for natural, orange, red, and white with oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1]  Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
     fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
     marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
     F1960, F2098.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
~  Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes. Certified for
   red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[1]  Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
     fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
     marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
     F1960, F2098.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4", e5-4-ce_01
    Elbow 2", e2-ce_01
    Elbow 1 1/2"-1 1/2", e6-4-ce_01
    
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling, 1/2" PEX x 3/4" PEX, c1-2x3-4-ce_02
    Coupling, 3/4" PEX x 1" PEX, c3-4x1-ce_02
    Coupling 1-1/4", C5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling 1-1/2", c6-4-ce_01
    Coupling 2" x 2", c2-ce_01
    Coupling 2" x 6/4", c2x6-4-ce_01
    
    Tee Equal 1/2"-1/2"-1/2", T1-2_01
    Tee Equal 3/4"-3/4"-3/4", T3-4_01
    Tee Equal 1"-1"-1", T1_01
    Tee Equal 1-1/4", t5-4-ce_01
    Tee Equal 2", t2-ce_01
    
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    PEX Ring, 1 1/4"
    PEX Ring, 1 1/2"
    PEX Ring, 2"
    
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX, t3-4x3-4x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX, t3-4x1-2x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX, t3-4x1-2x3-4-ce
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX, t1-2x1-2x3-4-ce_01
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX, t1x1x1-2-ce
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX, t1x1x3-4-ce_01
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX, t1x3-4x3-4-ce_01
    Reducing Tee 1-1/4" x 1-1/4" x 1", t5-4x5-4x1-ce_01
    Reducing Tee 1"-3/4"-1", t1x3-4x1-ce_01
    
    Plug for 1/2" PEX, ep1-2-ce_01
    Plug for 3/4" PEX, ep3-4-ce_01
    Plug for 1" PEX, ep1-ce_01
    
    Flow-Through Multi-Port Tee, 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    3/4" EP Branch Multi-Port Tee, 3 outlets, mz3-4x3i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Manifolds & reinforcing rings are certified as a system. Certified configurations
    include:
        Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX mo3-4x3i-ce_01
        3/4" EP Branch Multi-port Tee, 4 outlets mz3-4x4i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4", e5-4-ce_01
    Elbow 2", e2-ce_01
    Elbow 1 1/2"-1 1/2", e6-4-ce_01
    
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling, 1/2" PEX x 3/4" PEX, c1-2x3-4-ce_02
    Coupling, 3/4" PEX x 1" PEX, c3-4x1-ce_02
    Coupling 1-1/4", C5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling 1-1/2", c6-4-ce_01
    Coupling 2" x 2", c2-ce_01
    Coupling 2" x 6/4", c2x6-4-ce_01
    
    Tee Equal 1/2"-1/2"-1/2", T1-2_01
    Tee Equal 3/4"-3/4"-3/4", T3-4_01
    Tee Equal 1"-1"-1", T1_01
    Tee Equal 1-1/4", t5-4-ce_01
    Tee Equal 2", t2-ce_01
    
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    PEX Ring, 1 1/4"
    PEX Ring, 1 1/2"
    PEX Ring, 2"
    
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX, t3-4x3-4x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX, t3-4x1-2x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX, t3-4x1-2x3-4-ce
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX, t1-2x1-2x3-4-ce_01
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX, t1x1x1-2-ce
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX, t1x1x3-4-ce_01
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX, t1x3-4x3-4-ce_01
    Reducing Tee 1-1/4" x 1-1/4" x 1", t5-4x5-4x1-ce_01
    Reducing Tee 1"-3/4"-1", t1x3-4x1-ce_01
    
    Plug for 1/2" PEX, ep1-2-ce_01
    Plug for 3/4" PEX, ep3-4-ce_01
    Plug for 1" PEX, ep1-ce_01
    
    Flow-Through Multi-Port Tee, 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    3/4" EP Branch Multi-Port Tee, 3 outlets, mz3-4x3i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4", e5-4-ce_01
    Elbow 2", e2-ce_01
    Elbow 1 1/2"-1 1/2", e6-4-ce_01
    
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling, 1/2" PEX x 3/4" PEX, c1-2x3-4-ce_02
    Coupling, 3/4" PEX x 1" PEX, c3-4x1-ce_02
    Coupling 1-1/4", C5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling 1-1/2", c6-4-ce_01
    Coupling 2" x 2", c2-ce_01
    Coupling 2" x 6/4", c2x6-4-ce_01
    
    Tee Equal 1/2"-1/2"-1/2", T1-2_01
    Tee Equal 3/4"-3/4"-3/4", T3-4_01
    Tee Equal 1"-1"-1", T1_01
    Tee Equal 1-1/4", t5-4-ce_01
    Tee Equal 2", t2-ce_01
    
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    PEX Ring, 1 1/4"
    PEX Ring, 1 1/2"
    PEX Ring, 2"
    
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX, t3-4x3-4x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX, t3-4x1-2x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX, t3-4x1-2x3-4-ce
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX, t1-2x1-2x3-4-ce_01
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX, t1x1x1-2-ce
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX, t1x1x3-4-ce_01
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX, t1x3-4x3-4-ce_01
    Reducing Tee 1-1/4" x 1-1/4" x 1", t5-4x5-4x1-ce_01
    Reducing Tee 1"-3/4"-1", t1x3-4x1-ce_01
    
    Plug for 1/2" PEX, ep1-2-ce_01
    Plug for 3/4" PEX, ep3-4-ce_01
    Plug for 1" PEX, ep1-ce_01
    
    Flow-Through Multi-Port Tee, 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    3/4" EP Branch Multi-Port Tee, 3 outlets, mz3-4x3i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4", e5-4-ce_01
    Elbow 2", e2-ce_01
    Elbow 1 1/2"-1 1/2", e6-4-ce_01
    
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling, 1/2" PEX x 3/4" PEX, c1-2x3-4-ce_02
    Coupling, 3/4" PEX x 1" PEX, c3-4x1-ce_02
    Coupling 1-1/4", C5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling 1-1/2", c6-4-ce_01
    Coupling 2" x 2", c2-ce_01
    Coupling 2" x 6/4", c2x6-4-ce_01
    
    Tee Equal 1/2"-1/2"-1/2", T1-2_01
    Tee Equal 3/4"-3/4"-3/4", T3-4_01
    Tee Equal 1"-1"-1", T1_01
    Tee Equal 1-1/4", t5-4-ce_01
    Tee Equal 2", t2-ce_01
    
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    PEX Ring, 1 1/4"
    PEX Ring, 1 1/2"
    PEX Ring, 2"
    
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX, t3-4x3-4x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX, t3-4x1-2x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX, t3-4x1-2x3-4-ce
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX, t1-2x1-2x3-4-ce_01
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX, t1x1x1-2-ce
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX, t1x1x3-4-ce_01
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX, t1x3-4x3-4-ce_01
    Reducing Tee 1-1/4" x 1-1/4" x 1", t5-4x5-4x1-ce_01
    Reducing Tee 1"-3/4"-1", t1x3-4x1-ce_01
    
    Plug for 1/2" PEX, ep1-2-ce_01
    Plug for 3/4" PEX, ep3-4-ce_01
    Plug for 1" PEX, ep1-ce_01
    
    Flow-Through Multi-Port Tee, 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    3/4" EP Branch Multi-Port Tee, 3 outlets, mz3-4x3i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4", e5-4-ce_01
    Elbow 2", e2-ce_01
    Elbow 1 1/2"-1 1/2", e6-4-ce_01
    
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling, 1/2" PEX x 3/4" PEX, c1-2x3-4-ce_02
    Coupling, 3/4" PEX x 1" PEX, c3-4x1-ce_02
    Coupling 1-1/4", C5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling 1-1/2", c6-4-ce_01
    Coupling 2" x 2", c2-ce_01
    Coupling 2" x 6/4", c2x6-4-ce_01
    
    Tee Equal 1/2"-1/2"-1/2", T1-2_01
    Tee Equal 3/4"-3/4"-3/4", T3-4_01
    Tee Equal 1"-1"-1", T1_01
    Tee Equal 1-1/4", t5-4-ce_01
    Tee Equal 2", t2-ce_01
    
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    PEX Ring, 1 1/4"
    PEX Ring, 1 1/2"
    PEX Ring, 2”
    
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX, t3-4x3-4x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX, t3-4x1-2x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX, t3-4x1-2x3-4-ce
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX, t1-2x1-2x3-4-ce_01
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX, t1x1x1-2-ce
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX, t1x1x3-4-ce_01
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX, t1x3-4x3-4-ce_01
    Reducing Tee 1-1/4" x 1-1/4" x 1", t5-4x5-4x1-ce_01
    Reducing Tee 1"-3/4"-1", t1x3-4x1-ce_01
    
    Plug for 1/2" PEX, ep1-2-ce_01
    Plug for 3/4" PEX, ep3-4-ce_01
    Plug for 1" PEX, ep1-ce_01
    
    Flow-Through Multi-Port Tee, 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    3/4" EP Branch Multi-Port Tee, 3 outlets, mz3-4x3i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4", e5-4-ce_01
    Elbow 2", e2-ce_01
    Elbow 1 1/2"-1 1/2", e6-4-ce_01
    
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling, 1/2" PEX x 3/4" PEX, c1-2x3-4-ce_02
    Coupling, 3/4" PEX x 1" PEX, c3-4x1-ce_02
    Coupling 1-1/4", C5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling 1-1/2", c6-4-ce_01
    Coupling 2" x 2", c2-ce_01
    Coupling 2" x 6/4", c2x6-4-ce_01
    
    Tee Equal 1/2"-1/2"-1/2", T1-2_01
    Tee Equal 3/4"-3/4"-3/4", T3-4_01
    Tee Equal 1"-1"-1", T1_01
    Tee Equal 1-1/4", t5-4-ce_01
    Tee Equal 2", t2-ce_01
    
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    PEX Ring, 1 1/4"
    PEX Ring, 1 1/2"
    PEX Ring, 2”
    
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX, t3-4x3-4x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX, t3-4x1-2x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX, t3-4x1-2x3-4-ce
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX, t1-2x1-2x3-4-ce_01
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX, t1x1x1-2-ce
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX, t1x1x3-4-ce_01
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX, t1x3-4x3-4-ce_01
    Reducing Tee 1-1/4" x 1-1/4" x 1", t5-4x5-4x1-ce_01
    Reducing Tee 1"-3/4"-1", t1x3-4x1-ce_01
    
    Plug for 1/2" PEX, ep1-2-ce_01
    Plug for 3/4" PEX, ep3-4-ce_01
    Plug for 1" PEX, ep1-ce_01
    
    Flow-Through Multi-Port Tee, 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    3/4" EP Branch Multi-Port Tee, 3 outlets, mz3-4x3i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[2] Manifolds & reinforcing rings are certified as a system. Certified configurations
    include:
        Flow-through Multi-port Tee, 3 outlets, 3/4" x 3/4" ProPEX mo3-4x3i-ce_01
        3/4" EP Branch Multi-port Tee, 4 outlets mz3-4x4i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4", e5-4-ce_01
    Elbow 2", e2-ce_01
    Elbow 1 1/2"-1 1/2", e6-4-ce_01
    
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling, 1/2" PEX x 3/4" PEX, c1-2x3-4-ce_02
    Coupling, 3/4" PEX x 1" PEX, c3-4x1-ce_02
    Coupling 1-1/4", C5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling 1-1/2", c6-4-ce_01
    Coupling 2" x 2", c2-ce_01
    Coupling 2" x 6/4", c2x6-4-ce_01
    
    Tee Equal 1/2"-1/2"-1/2", T1-2_01
    Tee Equal 3/4"-3/4"-3/4", T3-4_01
    Tee Equal 1"-1"-1", T1_01
    Tee Equal 1-1/4", t5-4-ce_01
    Tee Equal 2", t2-ce_01
    
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    PEX Ring, 1 1/4"
    PEX Ring, 1 1/2"
    PEX Ring, 2”
    
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX, t3-4x3-4x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX, t3-4x1-2x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX, t3-4x1-2x3-4-ce
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX, t1-2x1-2x3-4-ce_01
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX, t1x1x1-2-ce
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX, t1x1x3-4-ce_01
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX, t1x3-4x3-4-ce_01
    Reducing Tee 1-1/4" x 1-1/4" x 1", t5-4x5-4x1-ce_01
    Reducing Tee 1"-3/4"-1", t1x3-4x1-ce_01
    
    Plug for 1/2" PEX, ep1-2-ce_01
    Plug for 3/4" PEX, ep3-4-ce_01
    Plug for 1" PEX, ep1-ce_01
    
    Flow-Through Multi-Port Tee, 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    3/4" EP Branch Multi-Port Tee, 3 outlets, mz3-4x3i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] Fittings & reinforcing rings are certified as a system. Certified configurations
    include:
    Elbow 1/2"-1/2", E1-2_01
    Elbow 3/4"-3/4", E3-4_01
    Elbow 1"-1", E1_01
    Elbow 1-1/4", e5-4-ce_01
    Elbow 2", e2-ce_01
    Elbow 1 1/2"-1 1/2", e6-4-ce_01
    
    Coupling 1/2"-1/2", C1-2_01
    Coupling 3/4"-3/4", C3-4_01
    Coupling 1"-1", C1_01
    Coupling, 1/2" PEX x 3/4" PEX, c1-2x3-4-ce_02
    Coupling, 3/4" PEX x 1" PEX, c3-4x1-ce_02
    Coupling 1-1/4", C5-4-ce_01
    Coupling 1-1/4" x 1", c5-4x1-ce_01
    Coupling 1-1/2", c6-4-ce_01
    Coupling 2" x 2", c2-ce_01
    Coupling 2" x 6/4", c2x6-4-ce_01
    
    Tee Equal 1/2"-1/2"-1/2", T1-2_01
    Tee Equal 3/4"-3/4"-3/4", T3-4_01
    Tee Equal 1"-1"-1", T1_01
    Tee Equal 1-1/4", t5-4-ce_01
    Tee Equal 2", t2-ce_01
    
    PEX Ring, 1/2"
    PEX Ring, 3/4"
    PEX Ring, 1"
    PEX Ring, 1 1/4"
    PEX Ring, 1 1/2"
    PEX Ring, 2”
    
    Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX, t3-4x3-4x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX, t3-4x1-2x1-2-ce
    Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX, t3-4x1-2x3-4-ce
    Reducing Tee, 1/2" PEX x 1/2" PEX x 3/4" PEX, t1-2x1-2x3-4-ce_01
    Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX, t1x1x1-2-ce
    Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX, t1x1x3-4-ce_01
    Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX, t1x3-4x3-4-ce_01
    Reducing Tee 1-1/4" x 1-1/4" x 1", t5-4x5-4x1-ce_01
    Reducing Tee 1"-3/4"-1", t1x3-4x1-ce_01
    
    Plug for 1/2" PEX, ep1-2-ce_01
    Plug for 3/4" PEX, ep3-4-ce_01
    Plug for 1" PEX, ep1-ce_01
    
    Flow-Through Multi-Port Tee, 2 outlets, 3/4" x 3/4" ProPEX, mo3-4x2i-ce_01
    3/4" EP Branch Multi-Port Tee, 3 outlets, mz3-4x3i-ce_01
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

% Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s)
  for which the tubing is recommended by the manufacturer, and shall be marked, as
  applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807,
  ASTM F2159, and ASTM F2098.
* Monowall pipe (Natural - 5106),  Skinned pipe (red, blue, white, and orange - 5106), and
  Skinned (black plus red, blue, white, or orange - 5106/5206/5306) are certified for the
  following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 2".
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

% Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s)
  for which the tubing is recommended by the manufacturer, and shall be marked, as
  applicable with the following fitting system designation(s): ASTM F1960, ASTM F1807,
  ASTM F2159, and ASTM F2098.
* Monowall pipe (Natural - 5106),  Skinned pipe (red, blue, white, and orange - 5106), and
  Skinned (black plus red, blue, white, or orange - 5106/5206/5306) are certified for the
  following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 2".
@ PEX 5106: Meets the chlorine resistance requirements of ASTM F876 when tested in
  accordance with ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

% Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
* Monowall pipe (Natural - 5106),  Skinned pipe (red, blue, white, and orange - 5106), and
  Skinned (black plus red, blue, white, or orange - 5106/5206/5306) are certified for the
  following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 2".
@ This tubing product has been evaluated against the performance requirements of
  ASTM	F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable
  water distribution system.  This product has been evaluated for use in radiant floor
  heating, (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

% Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
* Monowall pipe (Natural - 5106),  Skinned pipe (red, blue, white, and orange - 5106), and
  Skinned (black plus red, blue, white, or orange - 5106/5206/5306) are certified for the
  following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 2".
@ This tubing product has been evaluated against the performance requirements of
  ASTM	F876/877 and CSA B137.5.  This product is not NSF Certified for use in a potable
  water distribution system.  This product has been evaluated for use in radiant floor
  heating, (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

% Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s)for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
* This product is a non-barrier single layer (solid wall) pipe in red, blue, or white
  color.
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 2".
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

% Tubing certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s)for which the tubing is recommended by the manufacturer, and shall be
  marked, as applicable with the following fitting system designation(s): ASTM F1960, ASTM
  F1807, ASTM F2159, and ASTM F2098.
* This product is a non-barrier single layer (solid wall) pipe in red, blue, or white
  color.
  certified for the following sizes: 3/8", 1/2", 5/8", 3/4", 1", 1-1/4", 1-1/2" and 2".
@ This tubing product has been evaluated against the performance requirements of ASTM
  F876/877 and CSA B137.5. This product is not NSF Certified for use in a potable water
  distribution system. This product has been evaluated for use in radiant floor heating,
  (NSF-rfh), applications only.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] This product is also listed as barrier pipe in red, blue, or white color certified for
    the following sizes: 1/2", 3/4" and 1"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

$ Certified Bowpex tubing is natural (PEX 5106), red, white, and blue (PEX 5306).
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[1] May be marked with alternate trade designation "Wavin”.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[1] May be marked with alternate trade designation "Wavin”.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

% Certified Oxypex tubing has a red outer layer.
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting
  system(s) for which the tubing is recommended by the manufacturer, and shall be marked
  with the
  following fitting system designations: ASTM F1807, ASTM F2159.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[1] May be marked with alternate trade designation "Wavin”.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

% Certified Oxypex tubing has a red outer layer.
& Tubing Certified against ASTM F876 and CSA B137.5 shall include the standard
  designation(s) of the fitting system(s) for which the tubing is recommended by the
  manufacturer, and shall be marked, as applicable, with the following fitting system
  designation(s): ASTM F1807, ASTM F2159.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[3] May be marked with alternate trade designation "Wavin”.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[2] May be marked with alternate trade designation "Wavin”.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.  Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.  Certified for red,
  white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[4] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked with the following fitting system designations:  ASTM F1807, ASTM F2159, ASTM
    F1960, ASTM F2080, ASTM F2098.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Certified for Natural non-barrier single layer tubing for 1/8 - 3" sizes.  Certified for
  red, white, blue 2-layer tubing for 1/2", 5/8", 3/4", 1" sizes only.  Certified for red,
  white, blue, orange, natural 3-layer tubing for 1/2", 5/8", 3/4", 1" sizes only. 
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[5] Certified for the following:
    1. Monowall pipe [PEX 5006/PEX 5106]: 1/8"- 3"
    2. 2-layer skinned pipe for Red, Blue, White [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1"
    sizes only
    3. 3-Layer barrier pipe [PEX 5006/PEX 5106]: 1/2", 5/8", 3/4", 1" sizes only
[6] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer and shall be
    marked with the following fitting system designations: ASTM F1807, ASTM F2159, ASTM
    F1960, ASTM F2098.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Authorized for gray and white.
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Authorized for orange color.
& Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
  fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
  marked, if applicable, with the following fitting system designations: ASTM F1807, ASTM
  F2159, ASTM F2098, ASTM F2080, ASSE 1061, and ASTM F1960.
* Product is barrier tubing.
@ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[3] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd.
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
@ Certified for purple color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s): ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
Þ Product is Certified to the International Plumbing Code. Installation in accordance with
  the manufacturer's instructions and the requirements of the latest edition of the
  International Plumbing Code.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
? The UV material type 5306 is only applicable to the red, white, light blue and blue pipe.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
@ Certified for red, blue, white and natural colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

! Orange, natural, red, and teal green.
# Pipe tested as a system using VI fittings manufactured by CB Supplies Ltd. 
  Installation/assembly instructions titled “Installation Guidelines for CB Supplies Ltd.
  Insert Fittings Systems,” most current edition.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
% This product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Tubing Certified against CSA B137.5 shall include the standard designation(s) of the
    fitting system(s) for which the tubing is recommended by the manufacturer, and shall be
    marked, as applicable, with the following fitting system designation(s):  ASTM F1807,
    ASTM F2159, ASSE 1061.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Product is a non-wetted fitting component.

[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
    prior to presetting. As-sold dimensions are per manufacturer's specifications.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[1] Product is a non-wetted fitting component.

[2] Product is non-water contact.
[3] Clamps are sold preset. Product complies with the dimensional requirements of ASTM F2098
    prior to presetting. As-sold dimensions are per manufacturer's specifications.

& Product also meets the requirements of ASTM F877.
* May also be represented by EFF
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

& Product also meets the requirements of ASTM F877.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

& Product also meets the requirements of ASTM F877.
* May also be represented by EFF
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.