NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, April 4, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=CSA+B181%2E1&

NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document

Aurora Material Solutions
9280 Jefferson Street
Streetsboro, OH 44241
United States
330-422-0700
Visit this company's website

Facility : Streetsboro, OH

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC¢	2	AP4006CCWH2068	CSA B181.1 12454
PVC¢	2	AP4006DJWH2055	CSA B181.1 12454
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Potable Water - Materials

Material Type

End Use

Trade Name

Product Standard

PVC+ ¢

AP4006CCWH2068

CSA B181.1 12454

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Pasadena, TX

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
PVC¢	2	AP4006ALGR1126	CSA B181.1 12454
PVC¢	2	AP4006CCWH2068	CSA B181.1 12454
PVC¢	2	AP4006DJWH2055	CSA B181.1 12454
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Potable Water - Materials

Material Type	End Use	Trade Name	Product Standard
PVC+ ¢	2	AP4006CCWH2068	CSA B181.1 12454
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Black Swan Manufacturing
B5 - District Centre
4255 West Lake Street
Chicago, IL 60624
United States
773-227-3700

Facility : Maharashtra, India

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement* ¢ § [2]

ABS

DWV, SW

ABS Cement (Yellow)-Medium Bodied

CSA B181.1

* Cements Certified to CCSA B181.1 must be yellow in color.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

Bow Plumbing Group, Inc.
5700 Cote de Liesse
Montreal, QC H4T 1B1
Canada
450-372-5481
Visit this company's website

Facility : # 2 Granby, Quebec, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe~ [1]	ABS	Bow	CSA B181.1
1 1/4" - 6" Sch 40
~ Product is authorized to bear the cNSF Mark. [1] May be marked with alternate trade designation "Wavin”.

Facility : Granby, Quebec, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings! # ¢ § [1]	ABS	Bow	CSA B181.1
Backwater Valves
601799 1 1/2"	601807 2"	601815 3"	601831 3"
601823 4"	601849 4"
! Product may or may not bear the NSF U.P. code marking. # Part number may include an optional "R" suffix to indicate Retail or "B" to indicate Bulk. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] May be marked with alternate trade designation "Wavin”.
Fittings# ¢ [1]	ABS	Bow	CSA B181.1
22 1/2° Elbow (Hub x Hub)
601039 1 1/4"	601047 1 1/2"	601054 2"	601062 3"
601070 4"	601088 6"
22 1/2° Street Elbow (Spigot x Hub)
601096 1 1/2"	605030 2"	601104 3"	605048 4"
3-Way 90º Elbow¢ §
604926 3"
45° Elbow (Hub x Hub)
600882 1 1/4"	600908 1 1/2"	600924 2"	603563 3"
600940 4"	600957 6"
45° Street Elbow (Spigot x Hub)
600981 1 1/2"	604199 2"	603571 3"	601013 4"
603035 6"
45° Wye (All Hub)
604181 1 1/4"	604165 1 1/2"	604173 2"	603415 3"
600429 4"	600437 6"	605022 2" x 1 1/2" x 1 1/2"	605089 2" x 2" x 1 1/2"
603472 3" x 3" x 1 1/2"	603480 3" x 3" x 2"	600494 4" x 4" x 2"	600502 4" x 4" x 3"
600510 6" x 6" x 4"
60° Elbow (Hub x Hub)
600841 1 1/2"	600858 2"	600866 3"	600874 4"
90° Street Elbow (Spigot x Hub)
600718 1 1/4"	600734 1 1/2"	604207 2"	604215 3"
600767 4"
90° Elbow (Hub x Hub)
600593 1 1/4"	600619 1 1/2"	600635 2"	600650 3"
600668 4" x 3"	600676 4"	600684 6"
90° Elbow with Low Heel Inlet (All Hub)
604157 3" x 3" x 2"
90° Elbow with Low Heel Inlet (Hub x Spigot x Hub)
603589 3" x 3" x 2"
90° High Heel Inlet Elbow (All Hub)
604942 3" x 1 1/2"	604959 3" x 2"
90° Long Turn Elbow (Hub x Hub)
600700 1 1/2"
90° Long Turn Street Elbow (Spigot x Hub)
604736 2"
90° Side Inlet Elbow (All Hub)
604231 3" x 1 1/2"	604249 3" x 2"
90° Street Vent Elbow (Spigot x Hub)
604793 1 1/2"	604819 2"	604827 3"
90° Threaded Elbow (Hub x FPT)
604843 3"
90° Vent Elbow (Hub x Hub)
604074 1 1/2"	604082 2"	604090 3"
90º Elbow Long¢ §
604124 3"	604116 2"
Adjustable Flush Fit Closet Flange w/o Test Cap
603019 4" x 3"
Adjustable Flush Fit Closet Flange with Test Cap
603027 4" x 3"
Adjustable Offset Closet Flange (HUB)
602292 4" x 3"
Cap (Hard - Fits Over Sch 40 Pipe)
602532 1 1/4"	602540 1 1/2"	602557 2"	602565 3"
602573 4"
Cap FPT
602664 1 1/4"	602672 1 1/2"	602680 2"	602698 3"
Cast Iron Adapter (Soil Pipe Ferrule to DWV Hub)
601690 2"	601716 4" x 3"	601724 4"
Closet Flange - ADJ. METAL RING (Flange x Hub)
604504 4" x 3"	604512 4"
Closet Flange - ADJ. METAL RING (Flange x Spigot)
605352 4" x 3"	605360 4"
Closet Flange - ADJ. PLASTIC RING (Flange x Hub)
602250 4" x 3"
Closet Flange - ADJ. PLASTIC RING(Flange x Spigot)
602276 4" x 3"
Closet Flange - ONE PIECE (Flange x Hub)
602193 4" x 3"	602201 4"
Closet Flange - ONE PIECE (Flange x Spigot)
602227 4" x 3"
Closet Flange-ONE PIECE With Test Plug(FlangexHub)
602219 4" x 3"
Coupling (Hub x Hub)
601112 1 1/4"	601120 1 1/2"	601138 2"	601146 3"
601153 4"	601161 6"
Dishwasher Y 45
600809 1 1/2" x 1/2"
Double 45° Wye (All Hub)
600536 2"	600544 3"	600551 4"	600569 2" x 2" x 1 1/2" x 1 1/2"
600577 3" x 3" x 1 1/2" x 1 1/2"	600585 3" x 3" x 2" x 2"
Double Sanitary Tee (All Hub)
600312 1 1/2"	600320 2"	600338 3"	600346 4"
600353 2" x 2" x 1 1/2" x 1 1/2"	600361 3" x 3" x 1 1/2" x 1 1/2"	600379 3" x 3" x 2" x 2"
Female Adapter (Hub x FPT)
601377 1 1/4"	601385 1 1/2"	601393 2"	601401 3"
601419 4"	601427 6"
Fitting Cleanout Adapter (Spigot x FPT)
601443 1 1/4"	601450 1 1/2"	601468 2"	601476 3"
601484 4"	601492 6"
Flush Adapter Bushing (Spigot x FPT)
601658 1 1/2" x 1 1/4"	601666 2" x 1 1/2"
Flush Bushing (Spigot x Hub)
601542 1 1/2" x 1 1/4"	601559 2" x 1 1/4"	601567 2" x 1 1/2"	601575 3" x 1 1/2"
601583 3" x 2"	601591 4" x 1 1/2"	601609 4" x 2"	605543 4" x 3"
601625 6" x 4"
LA. Style P-Trap W/UNION - No Cleanout
604538 1 1/2" x 1 1/4"	604546 1 1/2"
Left Side Inlet Tee (All Hub)
600171 3" ( 1 1/2")	600189 3" ( 2")
Long Turn Tee Wye (All Hub)
604298 4" x 4" x 4"
Longturn Tee¢ §
604272 2"	604280 3"	604603 3" x 3" x 2"	605188 4" x 4" x 2"
604611 4" x 4" x 3"
Male Adapter (Hub x MPT)
601260 1 1/4"	601286 1 1/2"	601294 2"	601302 3"
601310 4"
Male Fitting Adapter (Spigot x MPT)
604769 1 1/2" x 1 1/4"	601328 1 1/4"	601344 1 1/2"	601351 2"
601369 3"
No Hub Soil Pipe Adapter (No Hub Spigot x DWV Hub)
601732 2" x 1 1/2"	601740 2"	601757 3"	601773 4" x 3"
601781 4"
One-Piece Flush-Fit Closet Flange - With Test Plug! ¢ §
603209 4" x 3"
One-Piece Flush-Fit Closet Flange - w/o Test Plug! ¢ §
603217 4" x 3"
P-TRAP (Hub x Hub)Solvent Welded Joint-No Cleanout
602326 1 1/2"	602334 2"	602342 3"	602359 4"
P-Trap (HubxHub) Solvent Welded Joint - w/Cleanout
602375 1 1/2"	602383 2"
P-Trap Adjustable
602391 1 1/4"
P-Trap With Union (Hub x Hub) No Cleanout
602409 1 1/2"	602417 2"
P-Trap With Union (Hub x Hub) With Cleanout
602433 1 1/2"	602441 2"
Reducer Bushing 'Long'
601617 4" x 3"
Reducer Coupling (Hub x Hub)
601179 1 1/2" x 1 1/4"	601195 2" x 1 1/2"	601203 3" x 1 1/2"	601211 3" x 2"
601229 4" x 1 1/2"	601245 4" x 2"	601252 4" x 3"
Repair Coupling (Hub x Hub)
604637 1 1/2"	604645 2"	604652 3"	604660 4"
Return Bend Less Cleanout (Hub x Hub)
605386 2"	605394 3"	605402 4"
Right Side Inlet Tee (All Hub)
600197 3" (1 1/2")	600205 3" (2")
Saninary Tee (All Hub)
600007 1 1/4"	604405 1 1/2"	600023 2"	603233 3"
600049 4"	600064 1 1/2" x 1 1/4" x 1 1/2"	600072 1 1/2" x 1 1/2" x 1 1/4"	600080 2" x 1 1/2" x 1 1/2"
600098 2" x 1 1/2" x 2"	600106 2" x 2" x 1 1/4"	600114 2" x 2" x 1 1/2"	600122 3" x 3" x 1 1/4"
603241 3" x 3" x 1 1/2"	603282 3" x 3" x 2"	600155 4" x 4" x 2"	600163 4" x 4" x 3"
Sanitary Tee (Spigot x Hub x Hub)
604371 3" x 3" x 2"
Sewer Adapter Bushing (DWV Spigot to Sewer Hub)
601856 3"	601864 4"
Sewer To DWV Adapter (Hub x Hub)
601674 4" x 3"	604678 4"
Street 45º Elbow¢ §
600965 1 1/4"
Street 90º Elbow Long¢ §
604744 3"
Test Tee (Hub x Hub x FPT)
600213 1 1/2"	600221 2"	600239 3"	604413 4"
Threaded Plug With Gasket (MIPT x Square Head)
602706 1 1/4"	602714 1 1/2"	602722 2"	602730 3"
602748 4"
Trap Adapter (Hub x Slip Joint)
601922 1 1/4"	601930 1 1/2" x 1 1/4"	601948 1 1/2"	601955 2" x 1 1/2" DWV
Trap Adapter (Spigot x Slip Joint)
610147 1 1/2" short	601971 1 1/4"	601989 1 1/2" x 1 1/4"	601997 1 1/2" long
602003 2" x 1 1/2" DWV
Vent Tee (All Hub)
604009 1 1/2"	604017 2"
Wye (Spigot x Hub x Hub)¢ §
604256 3"	603175 3" x 3" x 2"	603167 3" x 3" x 1 1/2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ! Product may or may not bear the NSF U.P. code marking. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. # Part number may include an optional "R" suffix to indicate Retail or "B" to indicate Bulk. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] May be marked with alternate trade designation "Wavin”.
Fittings# ~ [1]	ABS	Bow	CSA B181.1
45° Elbow
600890 1 1/2"	600916 2"	600932 3"	600304 4"
45° Street Elbow
600973 1 1/2"	600999 2"	601005 3"	601435 4"
603035 6"
45° Wye
600387 1 1/4"	600395 1 1/2"	600403 2"	600411 3"
600445 1 1/2" x 1 1/2" x 1 1/4"	600452 2" x 1 1/2" x 1 1/2"	600460 2" x 2" x 1 1/2"
45° Wye (All Hub)
600791 4" x 4" x 4"
90° Elbow
600593 1 1/4"	600601 1 1/2"	600627 2"	600643 3"
90° Street Elbow
600726 1 1/2"	600742 2"	600759 3"
Closet Flange-Adj Plas Ring w/Test Plug (FlangexH)
602268 4" x 3"
San Tee
600031 3"	600130 3" x 3" x 1 1/2"	600148 3" x 3" x 2"
Sanitary Tee
600015 1 1/2"	600056 1 1/2" x 1 1/4" x 1 1/4"
Wye
600478 3" x 3" x 1 1/2"	600486 3" x 3" x 2"	600817 4" x 4" x 2"	600833 4" x 4" x 3"
# Part number may include an optional "R" suffix to indicate Retail or "B" to indicate Bulk. ~ Product is authorized to bear the cNSF Mark. [1] May be marked with alternate trade designation "Wavin”.
Fittings# ~ [1]	ABS	Bow	CSA B181.1
Expansion Joint Hub
602169 1 1/2"	602177 2"	602185 3"
Expansion Joint Hub x Hub
602136 1 1/2"	602144 2"	602151 3"
# Part number may include an optional "R" suffix to indicate Retail or "B" to indicate Bulk. ~ Product is authorized to bear the cNSF Mark. [1] May be marked with alternate trade designation "Wavin”.

Canplas Industries Limited
31 Patterson Road
Barrie, ON L4M 4V3
Canada
705-726-3361
Visit this company's website

Facility : Barrie, Ontario, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings##	ABS	Canplas and/or GSR	CSA B181.1
ABS DWV -TRAP W/ CLEANOUT & UNION (H x H)
1 1/2" 103211A
ABS DWV 1/16 BEND (H x H)
1 1/4" 102550	1 1/2" 102551	2" 102552	3" 102553
4" 102554	6" 102556
ABS DWV 1/16 STREET BEND
1 1/2" 102561	2" 102562	3" 102563	4" 102564
6" 102566
ABS DWV 1/4 BEND (90°)
1 1/4" 102250	1 1/2" 102251	1 1/2" 102251L	2" 102252
2" 102252L	3" 102253	3" 102253-1	3" 102253L
4" 102254	4" 102254L	6" 102256
ABS DWV 1/4 BEND STREET LHI
3" x 3" x 2" 102248
ABS DWV 1/4 BEND W/ LHI
4" x 4" x 2" 102249
ABS DWV 1/4 BEND, STREET (90°) (SP x H)
1 1/4" 102450	1 1/2" 102451	1 1/2" 102451L	2" 102452
2" 102452L	3" 102453	3" 102453L	4" 102454
4" 102454L	6" 102456
ABS DWV 1/6 BEND (H x H)
1 1/4" 102600	1 1/2" 102601	2" 102602	3" 102603
4" 102604
ABS DWV 1/8 BEND (45°) (H x H)
1 1/4" 102500	1 1/2" 102501	2" 102502	3" 102503
4" 102504	6" 102506
ABS DWV 1/8 BEND (SHORT) (H x H)
1 1/4" 102520	1 1/2" 102521	3" 102523	4" 102524
ABS DWV 1/8 BEND, STREET (SPG x H)
1 1/4" 102400	1 1/2" 102401	2" 102402	3" 102403
4" 102404	6" 102406
ABS DWV 1/8 BEND, STREET, SHORT (SP x H)
1 1/4" 102420	1 1/2" 102421	2" 102422	3" 102423
4" 102424
ABS DWV 2-WAY C/O FTG (S x S x S)
3" 103723	4" 103724
ABS DWV 45° DISCH CL FLG
4" x 3" 113628SS
ABS DWV 45° DISCH CL FLGE
4" x 3" 113628
ABS DWV 45° HUB w/ TEST
4" x 3" 113628EO
ABS DWV 60° BEND (S x S)
2" 102602L	3" 102603L
ABS DWV 60º ELBOW SLIP JOINT
1 1/4" X 1 1/2" 112286A
ABS DWV 90 STREET BEND LG SWP
3" 105278
ABS DWV 90° 1/4 BEND
2" x 1 1/2" 102221	4" x 3" 102223
ABS DWV 90° BACKWATER VALVE
3" 123293
ABS DWV 90° BEND LHI
3" x 3" x 1 1/2" 102244	3" x 3" x 2" 102245
ABS DWV 90° BWV (SPG x S x S)
3" 123293D
ABS DWV 90° VENT ELL (S x FPT)
3" 102203-1
ABS DWV 90º S x SLIP JOINT
1 1/2" 112281A
ABS DWV ADAP BUSH (DFSPG x DWVHU)
4" x 3" 102764
ABS DWV ADAPTER BUSHING (SP x H)
3" 102841	4" 102842	6" 102846
ABS DWV ADJ CLOSET FLANGE SPG/MALE
4" X 3" 103626
ABS DWV ADJ CLOSET FLANGE SPG/MALE WITH SS RING
4" X 3" 103626SS
ABS DWV ADJ FLSH FLANGE W/TEST
103627T
ABS DWV BACKWATER VALVE
1 1/2" 123281	2" 123282 or PF42914	3" 123283 or PF42915	4" 123284 or PF42916
5" 123285 or PF42916WS	6" 123286 or PF42917
ABS DWV BACKWATER VALVE w/SLEEVE
3" 123287 or PF42915WS
ABS DWV CAP (FPT)
1 1/2" 103091
ABS DWV CAP (HUB)
1 1/4" 103080	1 1/2" 103081	2" 103082	3" 103083
4" 103084	6" 103086
ABS DWV CL BND REDUC W/ PLT
4" x 3" 103103A
ABS DWV CLEANOUT ADAP w/PLUG
1 1/4" 103700A	1 1/2" 103701A	2" 103702A	3" 103703A
4" 103704A	6" 103706A
ABS DWV CLEANOUT PLUG (MPT)
1 1/4" 103050S	1 1/2" 103051S	2" 103052S	3" 103053S
4" 103054S	6" 103057S
ABS DWV CLEANOUT TEE (S x S x FPT)
1 1/2" 102114S	2" 102115S	3" 102116S	4" 102117S
ABS DWV CLEANOUT TEE w/ PLUG
1 1/2" 102114A	2" 102115A	3" 102116A	4" 102117A
4" x 3" x 4" 102107A	6" 102118A
ABS DWV CLEANOUT TEE w/ PLUG (S x S)
1 1/2" 102114AS	2" 102115AS	3" 102116AS	4" 102117AS
ABS DWV CLOS BEND REDUC (SP x H)
4" x 3" 103103
ABS DWV CLOS FLANGE HUB-FLUSH
4" x 3" 103631
ABS DWV CLOS FLG ADJ SPG
4" x 3" 103626
ABS DWV CLOS FLGE HUB-FLUSH
4" x 3" 113631
ABS DWV CLOSET FLANGE 45º DISCHARGE
4" x 3" 103628
ABS DWV CLOSET FLANGE ADJ
4" x 3" 103624
ABS DWV CLOSET FLANGE ADJ W/ TP
4" x 3" 103624T
ABS DWV CLOSET FLANGE ADJ WITH SS RING
4" X 3" 103624SS
ABS DWV CLOSET FLANGE HUB
4" x 3" 103633
ABS DWV CLOSET FLANGE S
4" 103603
ABS DWV CLOSET FLANGE SPG
4" x 3" 103633-1
ABS DWV CLOSET FLANGE W/ CAP
4" x 3" 103632
ABS DWV CLOSET FLANGE W/ TST PLT
4" x 3" 103631T
ABS DWV CLOSET FLG SS RING EO
113627 x SSEO
ABS DWV CLOSET FLG w/ TEST
4" x 3" 113624EO
ABS DWV CLOSET FLGE HUB/GUSS
4" 103604
ABS DWV COMB TRAP ADP
1 1/2" x 1 1/4" 102859A
ABS DWV COMBINATION WYE & 1/8 BEND
3" 102710-1
ABS DWV COPPER TO DWV PIPE ADAPTER
1 1/2" 102861A	1 1/4" 102862A	1 1/2" x 1 1/4" 102864A	2" 102865A
ABS DWV COUPLING (H x H)
1 1/4" 103000	1 1/2" 103001	2" 103002	3" 103003
4" 1030004	6" 103006
ABS DWV DBL FIX FGT STREET
3" 105355
ABS DWV DBL FIX FTG
2" 104153	2" x 1 1/2" x 2" x 2" 104152	3" 104155	3" x 2" x 3" x 3" 104154
ABS DWV DBL FIX TEE
2" x 1 1/2" x 1 1/2" x 1 1/2" 104149
ABS DWV DOUBLE 1/4 BEND (H x H x H)
1 1/2" 102261	2" 102262	3" 102263	2" x 1 1/2" x 1 1/2" 102265
ABS DWV DOUBLE SANITARY TEE
3" x 3" x 2" x 1 1/2" 102180-2	3" x 3" x 2" x 2" 102181	3" x 3" x 3" x 3" x 1 1/2" 102163L
ABS DWV DOUBLE SANITARY TEE (H x H x H x H)
1 1/2" 102187	2" 102186	2" x 1 1/2" 102188	3" 102184
3" x 1 1/2" 102189	4" 102185	4" x 4" x 2" x 2" 102190	4" x 4" x 3" x 3" 102191
ABS DWV DOUBLE WYE (H x H x H x H)
1 1/2" 102351	2" 102352	2" x 2" x 1 1/2" x 1 1/2" 102374	3" 102353
3" x 3" x 1 1/2" x 1 1/2" 102376	3" x 3" x 2" x 2" 102377	4" 102354	4" x 4" x 2" x 2" 102380
4" x 4" x 3" x 3" 102381	6" x 6" x 4" x 4" 102388
ABS DWV DWV LV w/ TRAP
3" 123293C
ABS DWV DWV w/ TRAP & PLG C/O
3" 123293A
ABS DWV ELL SECTION FOR 3203
103203-2
ABS DWV ELL SECTION FOR 3204
103204-2
ABS DWV EXP JOINT (H x SPG)
1 1/2" 103811B	2" 103812B	3" 103813B
ABS DWV EXPAN JOINT (H x H)
1 1/2" 103811A	2" 103812A	3" 103813A	4" 103814A
ABS DWV FEMALE ADAPTER (H x FPT)
1 1/4" 102890	1 1/2" 102891	2" 102892	3" 102893
4" 102894	6" 102896
ABS DWV FIX TEE (S x S x FPT)
2" x 2" x 1 1/2" 104130
ABS DWV FIX TEE (S x S x FPT)
1 1/2" 104111
ABS DWV FLG EASY OPEN
4" x 3" 113631EO
ABS DWV FLUSH BUSHING (SP x H)
2" x 1 1/4" 102760	2" x 1 1/2" 102752	3" x 1 1/2" 102762	3" x 2" 102754
4" x 2" 102758	4" x 3" 102756	6" x 4" 102767
ABS DWV FLUSH BUSHING (SPG x FPT)
ABS DWV FTG CLEANOUT ADAPTR
1 1/4" 103700
ABS DWV FTG CO ADPT
1 1/2" 103701S	2" 103702S	3" 103703S	4" 103704S
6" 103706S
ABS DWV FTG CO ADT W/ PLUG
1 1/2" 103701AS	2" 103702AS	3" 103703AS	4" 103704AS
6" 103706AS
ABS DWV FTG TRAP ADAPTER (SP x MPT)
1 1/4" 102800	1 1/2" 102801	2" 102802
ABS DWV FTG TRAP ADAPTER w/ WASH
1 1/4" 102800A	1 1/2" 102801A	2" 102802A
ABS DWV FTG TRP ADPT
1 1/2" x 1 1/4" 103211Y
ABS DWV HUB ADAPT CAST IRON
2" 103452	2" x 1 1/2" 103468	3" 103453	4" 103454
4" x 3" 103464	6" 103456
ABS DWV KIT SINK STR E/O
103951A
ABS DWV LONG SWEEP 1/4 BEND (H x H)
1 1/4" 102275	1 1/2" 102276	2" 102277	3" 102278
4" 102279
ABS DWV LONG TURN TEE WYE
1 1/2" 104301	2" 104302	2" x 1 1/2" x 1 1/2" 104317	2" x 1 1/2" x 2" 104318
2" x 2" x 1 1/2" 104320	3" 104303	3" x 3" x 1 1/2" 104326	3" x 3" x 2" 104327
4" 104304	4" x 4" x 2" 104337	4" x 4" x 3" 104338
ABS DWV M-J ADAPTER (H x SPG)
2" 103422
ABS DWV MALE ADAPTER (MPT x H)
1 1/4" 102870	1 1/2" 102871	2" 102872	3" 102873
4" 102874
ABS DWV NO HUB ADAPT (H x SPG)
1 1/2" 103420	3" 103423	4" 103424
ABS DWV P-TRAP
1 1/4" x 1 1/2" 103221B
ABS DWV P-TRAP (S x FPT)
1 1/2" 103211F
ABS DWV P-TRAP ELBOW
1 1/2" 103201-2
ABS DWV P-TRAP ELL SHORT SWP
1 1/2" 102211	2" 102212
ABS DWV P-TRAP LA PATTERN
1 1/2" 103221A
ABS DWV P-TRAP SW USA
1 1/2" 103201-1S
ABS DWV P-TRAP SW W/ CLEANOUT (H x H)
1 1/4" 103200A	1 1/2" 103201A	2" 103202A
ABS DWV P-TRAP U-BEND (H x H)
2" 103202-1	3" 103203-1	4" 103204-1	6" 103206-1
ABS DWV P-TRAP W/ CLEANOUT (H x H)
1 1/4" 103220A
ABS DWV P-TRAP W/ SOLVENT (H x H)
2" 103202	3" 103203
ABS DWV P-TRAP W/ UNION
1 1/2" 103211N
ABS DWV P-TRAP W/ UNION (H x H)
1 1/2" 103211E
ABS DWV P-TRAP W/ UNION (H x H)
1 1/4" 103210E	1 1/2" 103211	2" 103212E
ABS DWV P-TRAP W/SOL (H x H)
1 1/4" 103200	1 1/2" 103201
ABS DWV PIPE TRAP ADAPTER
1 1/4" 102850	1 1/2" 102851	2" 102852
ABS DWV REDUCER COUPLNG (H x H)
1 1/4" x 1 1/2" 103020	1 1/4" x 2" 103021	1 1/4" x 3" 103030	1 1/2" x 2" 103022
1 1/2" x 3" 103023	1 1/2" x 4" 103029	2" x 3" 103024	2" x 4" 103025
3" x 4" 103026	3" x 5" 103027
ABS DWV S CAP
3" 103083S	4" 103084S
ABS DWV S-TRAP w/ CO & SOL (H x H)
1 1/2" 103251A
ABS DWV SANITARY TEE
1 1/2" x 1 1/4" x 1 1/4" 102137	1 1/2" x 1 1/4" x 1 1/2" 102125	1 1/2" x 1 1/2" x 1 1/4" 102132	2" x 1 1/2" x 1 1/2" 102128
2" x 1 1/2" x 2" 102127	2" x 2" x 1 1/4" 102133	2" x 2" x 1 1/2" 102126	3" x 3" x 1 1/4" 102135
3" x 3" x 1 1/2" 102131	3" x 3" x 2" 102130	4" x 4" x 2" 102134	4" x 4" x 3" 102136
6" x 6" x 4 102144
ABS DWV SANITARY TEE (FPT x FPT x S)
3" x 3" x 2" 102182
ABS DWV SANITARY TEE (H x FPT x H)
3" x 3" x 2" 102182-1
ABS DWV SANITARY TEE (H x H x H)
1 1/4" 102150	1 1/2" 102151	2" 102152	3" 102153
6" x 6" x 6" 102156
ABS DWV SANITARY TEE (S x S x FPT)
2" 102152-2
ABS DWV SANITARY TEE LEFT SIDE INLET
3" x 3" x 3" x 1 1/2" 102147L	3" x 3" x 3" x 2" 102148L
ABS DWV SANITARY TEE LONG
1 1/2" 102151L	2" 102152L	2" x 1 1/2" x 1 1/2" 102128L	2" x 1 1/2" x 2" 102127L
2" x 2" x 1 1/2" 102126L	3" x 3" x 2" 102130L	4" 102154L
ABS DWV SANITARY TEE RIGHT & LEFT SIDE INLET
3" x 3" x 3" x 1 1/2" 102147LR
ABS DWV SANITARY TEE RIGHT SIDE INLET
3" x 3" x 3" x 1 1/2" 102147R	3" x 3" x 3" x 2" 102148R
ABS DWV SEE
105130	105130L
ABS DWV SPG ADPT-CAST IR (H x H)
4" 103304
ABS DWV STRAP w/ SOLV (H x H)
1 1/2" 103251
ABS DWV STREET SANITARY TEE
1 1/2" 105151	2" x 2" x 1 1/2" 105126L	2" x 1 1/2" x 2" 105127L	2" x 1 1/2" x 1 1/2" 105128L
3" x 3" x 2" 105130L	3" x 3" x 1 1/2" 105131	4" x 4" x 2" 105134
ABS DWV STREET SANITARY TEE (SPG x H x H)
1 1/2" 105151L	2" 105152L	3" 105153	4" 105154
4" 105154L
ABS DWV STREET TEE (SPG x S x S x S)
3" x 3" x 2" x 2" 105181
ABS DWV SWVL TRAY PLG ADAP
1 1/2" 103215	1 1/2" 103216	1 1/2" 103217
ABS DWV TEE (FPT x FPT x S x S)
3" x 3" x 2" x 2" 102181-1
ABS DWV TRAP ADAPTER
1 1/2" x 1 1/4" 102860A
ABS DWV TRAP ADAPTER FEMALE
1 1/4" 102850A	1 1/2" 102851A	2" 102852A
ABS DWV TRAY PLG AD (H x FPT)
1 1/2" 103211-9
ABS DWV TRAY PLUG ADAPT
1 1/2" 103215
ABS DWV TUBE END C/OUT PLUG
1 1/4" 102890A	1 1/2" 102891A	2" 102892A	3" 102893A
4" 102894A
ABS DWV U SECTION FOR 3200A
103200-3
ABS DWV UPRIGHT WYE & 1/8 BEND
2" 102732
ABS DWV VENT ELL (90°) (H x H)
1 1/2" 102201	2" 102202	3" 102203
ABS DWV VENT TEE (S x S x S)
1 1/2" 102101	2" 102102	2" x 2" x 1 1/2" 102106	3" 102103
ABS DWV WYE (H x H x H)
1 1/4" 102300	1 1/2" 102301	1 1/2" x 1 1/2" x 1 1/4" 102323	2" 102302
2" x 1 1/2" x 1 1/2" 102324	2" x 2" x 1 1/2" 102325	3" 102303	3" x 3" x 1 1/4" 102330
3" x 3" x 1 1/2" 102331	3" x 3" x 2" 102326	4" 102304	4" x 4" x 2" 102328
4" x 4" x 3" 102327	6" 102306	6" x 6" x 4" 102344
ABS DWV WYE (S x S x FPT)
1 1/2" 102301-3
ABS DWV WYE LONG (S x S x S)
1 1/2" 102301L	2" 102302L	3" 102303L	3" x 3" x 1 1/2" 102331L
3" x 3" x 2" 102326L	4" 102304L	4" x 4" x 2" 102328L	4" x 4" x 3" 102327L
5" 102305L
ABS DWV WYE STREET (SPG x S x S)
1 1/2" 105301L	2" 105301L	3" 105303
ABS DWV WYE STREET REDUCER
4" x 4" x 2" 105328L	4" x 4" x 3" 105327L
ABS DWV WYE, STREET (SP x H x H)
3" x 3" x 1 1/2" 105331
ABS EO MEMBRANE
113627EO
PERMOSEAL P-TRAP W/ CLEANOUT & UNION
103231A
PERMOSEAL P-TRAP w/UNION
103231E
## Cleanout assemblies consist of an ABS body with the ABS plug and elastomeric gasket Listed in brackets after the Cat No of the assembly. Each clean-out is Certified as an assembly of the Listed components. The individual components are not Certified independent of each other. Clean-out plugs are marked with only the first four digits of the Cat No, (e.g., plug 3052-1 is marked "3052").

Canplas Industries Ltd.
500 Veterans Drive
Barrie, ON L4M 4V3
Canada
705-726-3361

Facility : # 2 Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings##	ABS	Canplas and/or GSR	CSA B181.1
ABS DWV -TRAP w/ CLEANOUT & UNION (H x H)
1 1/2" 103211A
ABS DWV 1/16 BEND (H x H)
1 1/4" 102550	1 1/2" 102551	2" 102552	3" 102553
4" 102554	6" 102556
ABS DWV 1/16 STREET BEND
1 1/2" 102561	2" 102562	3" 102563	4" 102564
6" 102566
ABS DWV 1/4 BEND (90°)
1 1/4" 102250	1 1/2" 102251	1 1/2" 102251L	2" 102252
2" 102252L	3" 102253	3" 102253-1	3" 102253L
4" 102254	4" 102254L	6" 102256
ABS DWV 1/4 BEND STREET LHI
3" x 3" x 2" 102248
ABS DWV 1/4 BEND w/ LHI
4" x 4" x 2" 102249
ABS DWV 1/4 BEND, STREET (90°) (SP x H)
1 1/4" 102450	1 1/2" 102451	1 1/2" 102451L	2" 102452
2" 102452L	3" 102453	3" 102453L	4" 102454
4" 102454L	6" 102456
ABS DWV 1/6 BEND (H x H)
1 1/4" 102600	1 1/2" 102601	2" 102602	3" 102603
4" 102604
ABS DWV 1/8 BEND (45°) (H x H)
1 1/4" 102500	1 1/2" 102501	2" 102502	3" 102503
4" 102504	6" 102506
ABS DWV 1/8 BEND (SHORT) (H x H)
1 1/4" 102520	1 1/2" 102521	4" 102524
ABS DWV 1/8 BEND, STREET (SPG x H)
1 1/4" 102400	1 1/2" 102401	2" 102402	3" 102403
4" 102404	6" 102406
ABS DWV 1/8 BEND, STREET, SHORT (SP x H)
1 1/4" 102420	1 1/2" 102421	2" 102422	3" 102423
4" 102424
ABS DWV 2-WAY C/O FTG (S x S x S)
3" 103723	4" 103724
ABS DWV 45° DISCH CL FLG
4" x 3" 113628SS
ABS DWV 45° DISCH CL FLGE
4" x 3" 113628
ABS DWV 45° HUB w/ TEST
4" x 3" 113628EO
ABS DWV 60° BEND (S x S)
2" 102602L	3" 102603L
ABS DWV 90 STREET BEND LG SWP
3" 105278
ABS DWV 90° 1/4 BEND
2" x 1 1/2" 102221	4" x 3" 102223
ABS DWV 90° BEND LHI
3" x 3" x 1 1/2" 102244	3" x 3" x 2" 102245
ABS DWV 90° BWV (SPG x S x S)
3" 123293D
ABS DWV 90° VENT ELL (S x FPT)
3" 102203-1
ABS DWV ADAP BUSH (DFSPG x DWVHU)
4" x 3" 102764
ABS DWV ADAPTER BUSHING (SP x H)
3" 102841	4" 102842	6" 102846
ABS DWV ADJ FLSH FLANGE W/TEST
103627T
ABS DWV BWV LV w/ TRAP
3" 123293C
ABS DWV BWV w/ TRAP & PLG C/O
ABS DWV CAP (FPT)
1 1/2" 103091
ABS DWV CAP (HUB)
1 1/4" 103080	1 1/2" 103081	2" 103082	3" 103083
4" 103084	6" 103086
ABS DWV CL BND REDUC W/ PLT
4" x 3" 103103A
ABS DWV CLEANOUT ADAP w/PLUG
1 1/4" 103700A	1 1/2" 103701A	2" 103702A	3" 103703A
4" 103704A	6" 103706A
ABS DWV CLEANOUT PLUG (MPT)
1 1/4" 103050S	1 1/2" 103051S	2" 103052S	3" 103053S
4" 103054S	6" 103057S
ABS DWV CLEANOUT TEE (S x S x FPT)
1 1/2" 102114S	2" 102115S	3" 102116S	4" 102117S
ABS DWV CLEANOUT TEE W/ PLUG
1 1/2" 102114A	2" 102115A	3" 102116A	4" 102117A
4" x 3" x 4" 102107A	6" 102118A
ABS DWV CLEANOUT TEE W/ PLUG (S x S)
1 1/2" 102114AS	2" 102115AS	3" 102116AS
ABS DWV CLOS BEND REDUC (SP x H)
4" x 3" 103103
ABS DWV CLOS FLANGE HUB-FLUSH
4" x 3" 103631
ABS DWV CLOS FLG ADJ SPG
4" x 3" 103626
ABS DWV CLOS FLGE HUB-FLUSH
4" x 3" 113631
ABS DWV CLOSET FLANGE ADJ
4" x 3" 103624
ABS DWV CLOSET FLANGE ADJ W/ TP
4" x 3" 103624T
ABS DWV CLOSET FLANGE HUB
4" x 3" 103633
ABS DWV CLOSET FLANGE S
4" 103603
ABS DWV CLOSET FLANGE SPG
4" x 3" 103633-1
ABS DWV CLOSET FLANGE w/ CAP
4" x 3" 103632
ABS DWV CLOSET FLANGE w/ TST PLT
4" x 3" 103631T
ABS DWV CLOSET FLG SS RING EO
113627 x SSEO
ABS DWV CLOSET FLG w/ TEST
4" x 3" 113624EO
ABS DWV CLOSET FLGE HUB/GUSS
4" 103604
ABS DWV COMB TRAP ADP
1 1/2" x 1 1/4" 102859A
ABS DWV COMBINATION WYE & 1/8 BEND
3" 102710-1
ABS DWV COPPER TO DWV PIPE ADAPTER
1 1/4" 102862A	1 1/2" 102861A	1 1/2" x 1 1/4" 102864A	2" 102865A
ABS DWV COUPLING (H x H)
1 1/4" 103000	1 1/2" 103001	2" 103002	3" 103003
4" 1030004	6" 103006
ABS DWV DBL FIX FGT STREET
3" 105355
ABS DWV DBL FIX FTG
2" 104153	2" x 1 1/2" x 2" x 2" 104152	3" 104155	3" x 2" x 3" x 3" 104154
ABS DWV DBL FIX TEE
2" x 1 1/2" x 1 1/2" x 1 1/2" 104149
ABS DWV DOUBLE 1/4 BEND (H x H x H)
1 1/2" 102261	2" 102262	2" x 1 1/2" x 1 1/2" 102265	3" 102263
ABS DWV DOUBLE SANITARY TEE
3" x 3" x 2" x 1 1/2" 102180-2	3" x 3" x 2" x 2" 102181	3" x 3" x 3" x 3" x 1 1/2" 102163L
ABS DWV DOUBLE SANITARY TEE (H x H x H x H)
1 1/2" 102187	2" 102186	2" x 1 1/2" 102188	3" 102184
3" x 1 1/2" 102189	4" 102185	4" x 4" x 2" x 2" 102190	4" x 4" x 3" x 3" 102191
ABS DWV DOUBLE WYE (H x H x H x H)
1 1/2" 102351	2" 102352	2" x 2" x 1 1/2" x 1 1/2" 102374	3" 102353
3" x 3" x 1 1/2" x 1 1/2" 102376	3" x 3" x 2" x 2" 102377	4" 102354	4" x 4" x 2" x 2" 102380
4" x 4" x 3" x 3" 102381	6" x 6" x 4" x 4" 102388
ABS DWV ELL SECTION FOR 3203
103203-2
ABS DWV ELL SECTION FOR 3204
103204-2
ABS DWV FEMALE ADAPTER (H x FPT)
1 1/4" 102890	1 1/2" 102891	2" 102892	3" 102893
4" 102894	6" 102896
ABS DWV FIX TEE (S x S x FPT)
1 1/2" 104111	2" x 2" x 1 1/2" 104130
ABS DWV FLG EASY OPEN
4" x 3" 113631EO
ABS DWV FLUSH BUSHING (SP x H)
2" x 1 1/4" 102760	2" x 1 1/2" 102752	3" x 1 1/2" 102762	3" x 2" 102754
4" x 2" 102758	4" x 3" 102756	6" x 4" 102767
ABS DWV FLUSH BUSHING (SPG x FPT)
1 1/2" x 1/2" 102747	1 1/2" x 3/4" 102749	1 1/2" x 1 1/4" 102750	1 1/2 x 1 1/4" 102751
2" x 1 1/2" 102753	3" x 2" 102755
ABS DWV FTG CLEANOUT ADAPTR
1 1/4" 103700
ABS DWV FTG CO ADPT
1 1/2" 103701S	2" 103702S	3" 103703S	4" 103704S
6" 103706S
ABS DWV FTG CO ADT W/ PLUG
1 1/2" 103701AS	2" 103702AS	3" 103703AS	4" 103704AS
6" 103706AS
ABS DWV FTG TRAP ADAPTER (SP x MPT)
1 1/4" 102800	1 1/2" 102801	2" 102802
ABS DWV FTG TRAP ADAPTER w/ WASH
1 1/4" 102800A	1 1/2" 102801A	2" 102802A
ABS DWV FTG TRP ADPT
1 1/2" x 1 1/4" 103211Y
ABS DWV HUB ADAPT CAST IRON
2" 103452	2" x 1 1/2" 103468	3" 103453	4" 103454
4" x 3" 103464	6" 103456
ABS DWV KIT SINK STR E/O
103951A
ABS DWV LONG SWEEP 1/4 BEND (H x H)
1 1/4" 102275	1 1/2" 102276	2" 102277	3" 102278
4" 102279
ABS DWV LONG TURN TEE WYE
1 1/2" 104301	2" 104302	3" 104303	4" 104304
2" x 1 1/2" x 1 1/2" 104317	2" x 1 1/2" x 2" 104318	2" x 2" x 1 1/2" 104320	3" x 3" x 1 1/2" 104326
3" x 3" x 2" 104327	4" x 4" x 2" 104337	4" x 4" x 3" 104338
ABS DWV M-J ADAPTER (H x SPG)
2" 103422
ABS DWV MALE ADAPTER (MPT x H)
1 1/4" 102870	1 1/2" 102871	2" 102872	3" 102873
4" 102874
ABS DWV NO HUB ADAPT (H x SPG)
1 1/2" 103420	3" 103423	4" 103424
ABS DWV P-TRAP
1 1/4" x 1 1/2" 103221B
ABS DWV P-TRAP (S x FPT)
1 1/2" 103211F
ABS DWV P-TRAP ELBOW
1 1/2" 103201-2
ABS DWV P-TRAP ELL SHORT SWP
1 1/2" 102211	2" 102212
ABS DWV P-TRAP LA PATTERN
1 1/2" 103221A
ABS DWV P-TRAP SW USA
1 1/2" 103201-1S
ABS DWV P-TRAP SW W/ CLEANOUT (H x H)
1 1/4" 103200A	1 1/2" 103201A	2" 103202A
ABS DWV P-TRAP U-BEND (H x H)
2" 103202-1	3" 103203-1	4" 103204-1	6" 103206-1
ABS DWV P-TRAP W/ SOLVENT (H x H)
2" 103202	3" 103203
ABS DWV P-TRAP W/ UNION
1 1/2" 103211N
ABS DWV P-TRAP W/ UNION (H x H)
1 1/4" 103210E	1 1/2" 103211	1 1/2" 103211E	2" 103212E
ABS DWV P-TRAP W/SOL (H x H)
1 1/4" 103200	1 1/2" 103201
ABS DWV P-TRAP w/ CLEANOUT (H x H)
1 1/4" 103220A
ABS DWV PIPE TRAP ADAPTER
1 1/4" 102850	1 1/2" 102851	2" 102852
ABS DWV REDUCER COUPLNG (H x H)
1 1/4" x 1 1/2" 103020	1 1/4" x 2" 103021	1 1/2" x 2" 103022	1 1/2" x 3" 103023
1 1/4" x 3" 103030	1 1/2" x 4" 103029	2" x 3" 103024	2" x 4" 103025
3" x 4" 103026	3" x 5" 103027
ABS DWV S CAP
3" 103083S	4" 103084S
ABS DWV S-TRAP W/ CO & SOL (H x H)
1 1/2" 103251A
ABS DWV SANITARY TEE
1 1/2" x 1 1/4" x 1 1/4" 102137	1 1/2" x 1 1/4" x 1 1/2" 102125	1 1/2" x 1 1/2" x 1 1/4" 102132	2" x 1 1/2" x 1 1/2" 102128
2" x 1 1/2" x 2" 102127	2" x 2" x 1 1/4" 102133	2" x 2" x 1 1/2" 102126	3" x 3" x 1 1/4" 102135
3" x 3" x 1 1/2" 102131	3" x 3" x 2" 102130	4" x 4" x 2" 102134	4" x 4" x 3" 102136
6" x 6" x 4 102144
ABS DWV SANITARY TEE (FPT x FPT x S)
3" x 3" x 2" 102182
ABS DWV SANITARY TEE (H x FPT x H)
3" x 3" x 2" 102182-1
ABS DWV SANITARY TEE (H x H x H)
1 1/4" 102150	1 1/2" 102151	2" 102152	3" 102153
6" x 6" x 6" 102156
ABS DWV SANITARY TEE (S x S x FPT)
2" 102152-2
ABS DWV SANITARY TEE LEFT SIDE INLET
3" x 3" x 3" x 1 1/2" 102147L	3" x 3" x 3" x 2" 102148L
ABS DWV SANITARY TEE LONG
1 1/2" 102151L	2" 102152L	2" x 1 1/2" x 1 1/2" 102128L	2" x 1 1/2" x 2" 102127L
2" x 2" x 1 1/2" 102126L	4" 102154L
ABS DWV SANITARY TEE RIGHT & LEFT SIDE INLET
3" x 3" x 3" x 1 1/2" 102147LR
ABS DWV SANITARY TEE RIGHT SIDE INLET
3" x 3" x 3" x 1 1/2" 102147R	3" x 3" x 3" x 2" 102148R
ABS DWV SEE
105130	105130L
ABS DWV SPG ADPT-CAST IR (H x H)
4" 103304
ABS DWV STRAP w/ SOLV (H x H)
1 1/2" 103251
ABS DWV STREET SANITARY TEE
1 1/2" 105151	2" x 1 1/2" x 1 1/2" 105128L	2" x 1 1/2" x 2" 105127L	2" x 2" x 1 1/2" 105126L
3" x 3" x 1 1/2" 105131	3" x 3" x 2" 105130L	4" x 4" x 2" 105134
ABS DWV STREET SANITARY TEE (SPG x H x H)
1 1/2" 105151L	2" 105152L	3" 105153	4" 105154
4" 105154L
ABS DWV STREET TEE (SPG x S x S x S)
3" x 3" x 2" x 2" 105181
ABS DWV SWVL TRAY PLG ADAP
1 1/2" 103215	1 1/2" 103216	1 1/2" 103217
ABS DWV TEE (FPT x FPT x S x S)
3" x 3" x 2" x 2" 102181-1
ABS DWV TRAP ADAPTER
1 1/2" x 1 1/4" 102860A
ABS DWV TRAP ADAPTER FEMALE
1 1/4" 102850A	1 1/2" 102851A	2" 102852A
ABS DWV TRAY PLG AD (H x FPT)
1 1/2" 103211-9
ABS DWV TRAY PLUG ADAPT
1 1/2" 103215
ABS DWV TUBE END C/OUT PLUG
1 1/4" 102890A	1 1/2" 102891A	2" 102892A	3" 102893A
4" 102894A
ABS DWV U SECTION FOR 3200A
103200-3
ABS DWV UPRIGHT WYE & 1/8 BEND
2" 102732
ABS DWV VENT ELL (90°) (H x H)
1 1/2" 102201	2" 102202	3" 102203
ABS DWV VENT TEE (S x S x S)
1 1/2" 102101	2" 102102	3" 102103	2" x 2" x 1 1/2" 102106
ABS DWV WYE (H x H x H)
1 1/4" 102300	1 1/2" 102301	1 1/2" x 1 1/2" x 1 1/4" 102323	2" 102302
2" x 1 1/2" x 1 1/2" 102324	2" x 2" x 1 1/2" 102325	3" 102303	3" x 3" x 1 1/4" 102330
3" x 3" x 1 1/2" 102331	3" x 3" x 2" 102326	4" 102304	4" x 4" x 3" 102327
4" x 4" x 2" 102328	6" 102306	6" x 6" x 4" 102344
ABS DWV WYE (S x S x FPT)
1 1/2" 102301-3
ABS DWV WYE LONG (S x S x S)
1 1/2" 102301L	2" 102302L	3" 102303L	3" x 3" x 1 1/2" 102331L
3" x 3" x 2" 102326L	4" 102304L	4" x 4" x 2" 102328L	4" x 4" x 3" 102327L
5" 102305L
ABS DWV WYE STREET (SPG x S x S)
1 1/2" 105301L	2" 105301L	3" 105303
ABS DWV WYE STREET REDUCER
4" x 4" x 2" 105328L	4" x 4" x 3" 105327L
ABS DWV WYE, STREET (SP x H x H)
3" x 3" x 1 1/2" 105331
ABS EO MEMBRANE
113627EO
PERMOSEAL P-TRAP W/UNION
103231E
PERMOSEAL P-TRAP w/ CLEANOUT & UNION
103231A
## Cleanout assemblies consist of an ABS body with the ABS plug and elastomeric gasket Listed in brackets after the Cat No of the assembly. Each clean-out is Certified as an assembly of the Listed components. The individual components are not Certified independent of each other. Clean-out plugs are marked with only the first four digits of the Cat No, (e.g., plug 3052-1 is marked "3052").

* This product may also use the Multi logo as the trade name on the product.

Charlotte Pipe & Foundry Company
Plastics Division
4210 Old Charlotte Highway
P.O. Box 1339
Monroe, NC 28111-1339
United States
704-291-3218
Visit this company's website

Facility : Monroe, NC

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings@ ¢	ABS	CPF®	CSA B181.1
ABS 100 - Coupling (Hub x Hub)
1 1/4", 1 1/2", 2", 3", 4", 6", 8", 10", 12"
ABS 101- Female Adapter (Hub x FTP)
1 1/2", 2", 3", 4", 6"
ABS 102 - Pipe Increaser - Reducer (Hub x Hub)
1 1/2" x 2", 1 1/2" x 3", 2" x 3", 2" x 4", 3" x 4"
ABS 103 - Trap Adapter-Male (SPG x SLIP)
1 1/2"	2"	1 1/2" x 1 1/4"
ABS 103P - Trap Adapter-Male w/Plastic Nut
1 1/2"	1 1/2" x 1 1/4"
ABS 103R - Trap Adapter-Male w/Plastic Nut
1 1/2"
ABS 103W – Trap Adapter Male w/Plas Nut-Washer
1 1/2"	1 1/2" x 1 1/4"	2"
ABS 103x - Trap Adapter-Male w/Chrome Nut
1 1/2"	1 1/2" x 1 1/4"
ABS 104 - Trap Adapter-Female (Hub x Slip)
1 1/2" x 1 1/4", 1 1/2", 2"
ABS 104P - Trap Adapter-Female w/Plastic Nut
1 1/2" x 1 1/4"	1 1/2"
ABS 104R – Trap Adapter Female w/Plast Washer-Nut
1 1/2"
ABS 104W –Trap Adapter Female w/Plastic Nut-Washer
1 1/2" x 1 1/4"	1 1/2"
ABS 104X – Trap Adapter Female w/Chrome Nut
1 1/2"	1 1/2" x 1 1/4"	2"
ABS 107 - Flush Bushing (SPG x Hub)
1 1/2" x 1 1/4"	2" x 1 1/2"	4" x 3", 6" x 4"	3" x 1 1/2"
3" x 2", 4" x 2"	2" x 1 1/4"
ABS 109–Male Adptr- not accept tail pc (MPT x Hub)
1 1/2", 2", 3", 4"
ABS 111- Male Fitting Adapter (SPG x MPT)
1 1/2"	2"
ABS 113 - Tray Plug Adapter (Hub)
1 1/2"
ABS 113S - Tray Plug Adapter (SPG)
1 1/2"
ABS 114 - Threaded Cap (FPT)
1 1/2"
ABS 116 - Cap (Socket)
1 1/2", 2", 3", 4", 6"
ABS 117 - Adapter Coupling (Hub x Hub)
4" x 3"	4" x 4"
ABS 118 - Adapter Bushing (DWV SPG x Hub)
3", 4"
ABS 119 - No-Hub Adapter (SPG x Hub)
1 1/2", 2", 3", 4, 4" x 3"
ABS 122 - Spigot Adapter, Cast iron (Hub x Hub)[4]
2" x 2", 4" x 4"
ABS 123 - Hub Adapter, Cast Iron (Hub x SPG)[1]
2" x 2"	4" x 4"
ABS 123R -Hub Adapter,Cast Iron,Increaser(HubxSPG)
1 1/2" x 2", 3" x 4"
ABS 130 - Repair Coupling (Hub x Hub)
1 1/2", 2", 3", 4", 6"
ABS 131 - Test Cap
1 1/2", 2", 3", 4"
ABS 300 - 90° Elbows 1/4 Bend (Hub x Hub)V
1 1/2", 2", 3", 4" 6"
ABS 300R - 90° Elbows 1/4 Bend, Reducing (HubxHub)
2" x 1 1/2"
ABS 300s–90° Elbow1/4Bend,with Side Inlet(All Hub)
3" x 3" x 2"
ABS 302 - 90° Elbows 1/4 Bend, Street (SPG x Hub)
1 1/2", 2", 3", 4"
ABS 303 - 90° Elbow 1/4 Bend w/Low Heel Inlet(Hub)
3 x 3 x 1 1/2", 3" x 3" x 2", 4" x 4" x 2"
ABS 303S - Elbow 1/4 Bend with Side Inlet
3" x 3" x 1 1/2"
ABS 304 - 90° Elbows Long Sweep 1/4 Bend (HubxHub)
1 1/2", 2", 3", 4"
ABS 305 - 90° Elbow Long Sweep ¼Bend w/ Inlet(Hub)
3" x 3" x 2"
ABS 307 - 90° Elbow Long Sweep ¼Bend w/Inlet(Hub)
3" x 3" x 1 1/2"	3" x 3" x 2"
ABS 309-90° Elbow Long Sweep ¼Bend,Street(HubxSPG)
1 1/2", 2", 3"
ABS 310–90° Elbow ¼ Bend LowHeelInlet HubxSPG xHub
3" x 3" x 2"
ABS 311–90° Elbow Long Swp ¼ Bend Side Inlet (Hub)
3" x 3" x 2"
ABS 319 - 60° Elbow 1/6 Bend (Hub x Hub)
1 1/2", 2", 3", 4"
ABS 320 - 60º Elbow 1/6 Bend, Street (SPG x Hub)
1 1/2", 2", 3"
ABS 321 - 45° Elbows 1/8 Bend (Hub x Hub)
1 1/2", 2", 3", 4", 6"
ABS 323 - 45º Elbows 1/8 Bend, Street (SPG x Hub)
1 1/2", 2", 3", 4", 6"
ABS 324 - 22 1/2° Elbow 1/16 Bend (Hub x Hub)
1 1/2", 2", 3", 4", 6"
ABS 326 - 22 1/2° Elbow 1/16 Bend Street (SPGxHub)
1 1/2", 2", 3", 4"
ABS 327 - 90° Elbows Double 1/4 bend (ALL HUB)
1 1 /2", 2", 3", 2" x 1 1/2" x 1 1/2"
ABS 328X - Closet Bend Short w/Test Cap
3" x 4"
ABS 329 - Closet Bend, Reducing (Hub x Hub)
3" x 4"
ABS 330 - Closet Bend, Reducing (Hub x SPG)
3" x 4"
ABS 330x-Closet Bend Reducing w/ Test Cap(HubxSPG)
3" x 4"
ABS 331 - Vent Ell (Hub x Hub)
1 1/2", 2", 3"
ABS 333 - Vent Ell, Street (Hub x SPG)
1 1/2", 2"
ABS 400 - Sanitary Tee (ALL HUB)
1 1/2", 2", 3", 4", 6"
ABS 401 - Sanitary Tee, Reducing (All Hub)
2" x1 1/2" x 1 1/2"	2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"
3" x 3" x 2"	4" x 4 "x 2"	4" x 4" x 3"	6" x 6" x 4"
ABS 403 - Sanitary Tee, Street (SPG x Hub x Hub)
1 1/2", 2", 3", 4"
ABS 404 -Sanitary Tee,Street,Reducing(SPGxHubxHub)
2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"
3" x 3" x 2"
ABS 416 - Sanitary Tee with Left Side Inlet (Hub)
3" x 3" x 3" x 1 1/2"	3"x 3" x 3" x 2"
ABS 417 – Sanitary Tee w/Right Side Inlet(All Hub)
3" x 3" x 3" x 1 1/2"	3" x 3" x 3" x 2"
ABS 418 - Sanitary Tee w/R & L Side Inlet (Hub)
3" x 3" x 3" x 2" x 2"	4" x 4" x 4" x 2" x 2"
ABS 428 - Double Sanitary Tee (All Hub)
1 1/2", 2", 3", 4"
ABS 429 - Double Sanitary Tee, Reducing (All Hub)
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
ABS 438 - Dbl Sanitary Tee w/Side Inlet (Hub)
3" x 3" x 3" x 3" x 2"	4" x 4" x 4" x 4" x 2"
ABS 439 - Dbl Sanitary Tee w/R&LSide Inlets (Hub)
3" x 3" x 3" x 3" x 2" x 2"	4" x 4" x 4" x 4" x 2" x 2"
ABS 441 - Vent Tee (All Hub)
1 1/2", 2", 3"
ABS 447 - Horizontal Twin Tee (All Hub)
3" x 3" x 1 1/2" x 1 1/2"
ABS 448 - Two-Way Cleanout (All Hub)
3", 4"
ABS 500 - Double Fixture Fitting (All Hub)
2", 3"	2" x 1 1/2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2" x 2"	2" x 2" x 1 1/2" x 1 1/2"
3" x 2" x 3" x 3"
ABS 501 - Comb Wye and 1/8 Bend (All Hub)
1 1/2", 2", 3", 4"
ABS 502-Comb Wye & 1/8 Bend, Reducing One Pc.(Hub)
2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"
3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
ABS 600 - Wye (ALL HUB)
1 1/2", 2" 3",4",6"
ABS 601 - Wye, Reducing (All Hub)
2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"
3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"	4" x 4" x 3"
6" x 6" x 4"
ABS 602 - Wye, Street (SPG x Hub x Hub)
1 1/2", 2", 3", 4"
ABS 603 - Wye, Street, Reducing (SPG x Hub x Hub)
3" x 3" x 1 1/2"	4" x 4" x 3"	3" x 3" x 2"
ABS 611 - Double Wye (All Hub)
1 1/2", 2", 3", 4"
ABS 612 - Double Wye, Reducing (All Hub)
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 3" x 3"
ABS 700 - Return Bend (Hub x Hub)
1 1/2", 2", 3", 4"
ABS 704 - Tail Piece Adapter (SPG x Slip)
1 1/2"
ABS 704P-Tail Piece Adapter(SPGxSlip)w/Plastic Nut
1 1/2"
ABS 706x - P-Trap (Hub x Hub)
1 1/2", 2", 3", 4"
ABS 708P - P-Trap (Hub x Hub with Plastic Nut)
1 1/2", 2"
ABS 708x - P-Trap (Hub x Hub with Chrome Nut)
1 1/2"
ABS 710-DWV Low Profile P-Trap w/Solvent Weld Jnt
2"
ABS 711P - L.A. Pattern P-Trap (Slip x Hub)[3]
1 1/2"
ABS 711W-L.A. Pattern P-Trap Plstc Nut (SlipxHub)[3]
1 1/2"
ABS 900-Swivel Tray Plug Adapter w/Washer(SPGxFPT)
1 1/2"
ABS 900x - ABS Ext Swivel Tray Adp
1 1/2"
ABS 910-Swivel Tray Plug Adapter w/Washer(SPGxFPT)
1 1/2"
[4] This is an ABS to Cast Iron transition fitting. As such, only the ABS adapter side of the fitting meets the dimensional requirements of ASTM D2661 and CSA B181.1. [1] Plain End: Joint can be made with compression gasket only. [3] Furnished with 1 1/2 and 1 1/2 x 1 1/4 Polyethylene nut/washer combination. @ A letter after the part number designates the following: X - Metal Ring/Plastic Plug R - Reducing P - Plastic Ring W - Washer ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Facility : Muncy, PA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe~	ABS	Charlotte Pipe®***	CSA B181.1
1 1/4" - 6" Sch 40
~ Product is authorized to bear the cNSF Mark. *** These pipe products may include the production location code PLPA in the trade name.

Facility : Cedar City, UT

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings@ ¢	ABS	CPF®****	CSA B181.1
ABS 100 - Coupling (Hub x Hub)
1 1/4", 1 1/2", 2", 3", 4", 6", 8", 10", 12"
ABS 101- Female Adapter (Hub x FTP)
1 1/2", 2", 3", 4", 6"
ABS 102 - Pipe Increaser - Reducer (Hub x Hub)
3" x 4"	2" x 4"	2" x 3"	1 1/2" x 3"
1 1/2" x 2"
ABS 103 - Trap Adapter-Male (SPG x SLIP)
1 1/2"	1 1/2" x 1 1/4"	2"
ABS 103P – Trap Adapter Male w/Plastic Nut
1 1/2" x 1 1/4"	1 1/2"
ABS 103R – Trap Adapter Male w/Plastic Nut
1 1/2"
ABS 103W – Trap Adapter Male w/Plas Nut-Washer
1 1/2"	1 1/2" x 1 1/4"	2"
ABS 103X – Trap Adapter Male w/Chrome Nut
1 1/2"	1 1/2" x 1 1/4"
ABS 104 - Trap Adapter-Female (Hub x Slip)
1 1/2"	1 1/2" x 1 1/4"	2"
ABS 104P – Trap Adapter Female w/Plastic Nut
1 1/2" x 1 1/4"	1 1/2"
ABS 104R – Trap Adapter Female w/Plast Washer-Nut
1 1/2"
ABS 104W –Trap Adapter Female w/Plastic Nut-Washer
1 1/2"	1 1/2" x 1 1/4"
ABS 104X – Trap Adapter Female w/Chrome Nut
1 1/2"	1 1/2" x 1 1/4"	2"
ABS 107 - Flush Bushing (SPG x Hub)
1 1/2" x 1 1/4"	2" x 1 1/4"	2" x 1 1/2"	3" x 1 1/2"
3" x 2"	4" x 2"	4" x 3"	6" x 4"
ABS 109–Male Adptr- not accept tail pc (MPT x Hub)
1 1/2", 2", 3", 4"
ABS 111- Male Fitting Adapter (SPG x MPT)
1 1/2"	2"
ABS 113 - Tray Plug Adapter (Hub)
1 1/2"
ABS 113S - Tray Plug Adapter (SPG)
1 1/2"
ABS 114 - Threaded Cap (FPT)
1 1/2"
ABS 116 - Cap (Socket)
1 1/2", 2", 3", 4", 6"
ABS 117 - Adapter Coupling (Hub x Hub)
4" x 4"	4" x 3"
ABS 118 - Adapter Bushing (DWV SPG x Hub)
3", 4"
ABS 119 - No-Hub Adapter (SPG x Hub)
1 1/2", 2", 3", 4"	4" x 3"
ABS 122 - Spigot Adapter, Cast iron (Hub x Hub)
2" x 2"	4" x 4"
ABS 123 - Hub Adapter, Cast Iron (Hub x SPG)[1]
2" x 2"	4" x 4"
ABS 123R -Hub Adapter,Cast Iron,Increaser(HubxSPG)
1 1/2" x 2"	3" x 4"
ABS 130 - Repair Coupling (Hub x Hub)
1 1/2", 2", 3", 4", 6"
ABS 131 - Test Cap
1 1/2", 2", 3", 4"
ABS 300 - 90° Elbows 1/4 Bend (Hub x Hub)
1 1/2", 2", 3", 4", 6"
ABS 300R - 90° Elbows 1/4 Bend, Reducing (HubxHub)
2" x 1 1/2"
ABS 300s–90° Elbow1/4Bend,with Side Inlet(All Hub)
3" x 3" x 2"
ABS 302 - 90° Elbows 1/4 Bend, Street (SPG x Hub)
1 1/2", 2", 3", 4"
ABS 303 - 90° Elbow 1/4 Bend w/Low Heel Inlet(Hub)
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 2"
ABS 303S - Elbow 1/4 Bend with Side Inlet
3" x 3" x 1 1/2"
ABS 304 - 90° Elbows Long Sweep 1/4 Bend (HubxHub)
1 1/2", 2", 3", 4"
ABS 305 - 90° Elbow Long Sweep ¼Bend w/ Inlet(Hub)
3" x 3" x 2"
ABS 307 - 90° Elbow Long Sweep ¼Bend w/Inlet(Hub)
3" x 3" x 1 1/2"	3" x 3" x 2"
ABS 309-90° Elbow Long Sweep ¼Bend,Street(HubxSPG)
1 1/2", 2", 3"
ABS 310–90° Elbow ¼ Bend LowHeelInlet HubxSPG xHub
3" x 3" x 2"
ABS 311–90° Elbow Long Swp ¼ Bend Side Inlet (Hub)
3" x 3" x 2"
ABS 319 - 60° Elbow 1/6 Bend (Hub x Hub)
1 1/2", 2", 3", 4"
ABS 320 - 60º Elbow 1/6 Bend, Street (SPG x Hub)
1 1/2", 2", 3"
ABS 321 - 45° Elbows 1/8 Bend (Hub x Hub)
1 1/2", 2", 3", 4", 6"
ABS 323 - 45º Elbows 1/8 Bend, Street (SPG x Hub)
1 1/2", 2", 3", 4", 6"
ABS 324 - 22 1/2° Elbow 1/16 Bend (Hub x Hub)
1 1/2", 2", 3", 4", 6"
ABS 326 - 22 1/2° Elbow 1/16 Bend Street (SPGxHub)
1 1/2", 2", 3", 4"
ABS 327 - 90° Elbows Double 1/4 bend (ALL HUB)
1 1 /2", 2", 3", 2" x 1 1/2" x 1 1/2"
ABS 328X - Closet Bend Short w/Test Cap
3" x 4"
ABS 329 - Closet Bend, Reducing (Hub x Hub)
3" x 4"
ABS 330 - Closet Bend, Reducing (Hub x SPG)
3" x 4"
ABS 330x-Closet Bend Reducing w/ Test Cap(HubxSPG)
3" x 4"
ABS 331 - Vent Ell (Hub x Hub)
1 1/2", 2", 3"
ABS 333 - Vent Ell, Street (Hub x SPG)
1 1/2", 2"
ABS 400 - Sanitary Tee (ALL HUB)
1 1/2", 2", 3", 4", 6"
ABS 401 - Sanitary Tee, Reducing (All Hub)
2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"
3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"	6" x 6" x 4"
ABS 403 - Sanitary Tee, Street (SPG x Hub x Hub)
1 1/2", 2", 3", 4"
ABS 404 -Sanitary Tee,Street,Reducing(SPGxHubxHub)
2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"
3" x 3" x 2"
ABS 416 - Sanitary Tee with Left Side Inlet (Hub)
3" x 3" x 3" x 2", 3'' x 3'' x 3'' x 1 1/2''
ABS 417 – Sanitary Tee w/Right Side Inlet(All Hub)
3" x 3" x 3" x 1 1/2"	3" x 3" x 3" x 2"
ABS 418 - Sanitary Tee w/R & L Side Inlet (Hub)
3" x 3" x 3" x 2" x 2"	4" x 4" x 4" x 2" x 2"
ABS 428 - Double Sanitary Tee (All Hub)
1 1/2", 2", 3", 4"
ABS 429 - Double Sanitary Tee, Reducing (All Hub)
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	3" x 3" x 2" x 2"	4" x 4" x 2" x 2"
4" x 4" x 3" x 3"
ABS 438 - Dbl Sanitary Tee w/Side Inlet (Hub)
3" x 3" x 3" x 3" x 2"	4" x 4" x 4" x 4" x 2"
ABS 439 - Dbl Sanitary Tee w/R&LSide Inlets (Hub)
3" x 3" x 3" x 3" x 2" x 2"	4" x 4" x 4" x 4" x 2" x 2"
ABS 441 - Vent Tee (All Hub)
1 1/2", 2", 3"
ABS 447 - Horizontal Twin Tee (All Hub)
3" x 3" x 1 1/2" x 1 1/2"
ABS 448 - Two-Way Cleanout (All Hub)
3", 4"
ABS 500 - Double Fixture Fitting (All Hub)
2", 3"	2" x 1 1/2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2" x 2"	2" x 2" x 1 1/2" x 1 1/2"
3" x 2" x 3" x 3"
ABS 501 - Comb Wye and 1/8 Bend (All Hub)
1 1/2", 2", 3", 4"
ABS 502-Comb Wye & 1/8 Bend, Reducing One Pc.(Hub)
2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"
3" x 3" x 2"	4" x 4" x 2"	4" x 4" x 3"
ABS 600 - Wye (ALL HUB)
1 1/2", 2", 3", 4", 6"
ABS 601 - Wye, Reducing (All Hub)
2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"
3" x 3" x 2"	4" x 4" x 1 1/2"	4" x 4" x 2"	4" x 4" x 3"
6" x 6" x 4"
ABS 602 - Wye, Street (SPG x Hub x Hub)
1 1/2", 2", 3", 4"
ABS 603 - Wye, Street, Reducing (SPG x Hub x Hub)
3" x 3" x 1 1/2"	3" x 3" x 2"	4" x 4" x 3"
ABS 611 - Double Wye (All Hub)
1 1/2", 2", 3", 4"
ABS 612 - Double Wye, Reducing (All Hub)
2" x 2" x 1 1/2" x 1 1/2"	3" x 3" x 1 1/2" x 1 1/2"	4" x 4" x 3" x 3"	3" x 3" x 2" x 2"
ABS 700 - Return Bend (Hub x Hub)
1 1/2", 2", 3", 4"
ABS 704 - Tail Piece Adapter (SPG x Slip)
1 1/2"
ABS 704P-Tail Piece Adapter(SPGxSlip)w/Plastic Nut
1 1/2"
ABS 706x - P-Trap (Hub x Hub)
1 1/2", 2", 3", 4"
ABS 708P - P-Trap (Hub x Hub with Plastic Nut)
1 1/2", 2"
ABS 708x - P-Trap (Hub x Hub with Chrome Nut)
1 1/2"
ABS 710-DWV Low Profile P-Trap w/Solvent Weld Jnt
2"
ABS 711P - L.A. Pattern P-Trap (Slip x Hub)[3]
1 1/2"
ABS 711W-L.A. Pattern P-Trap Plstc Nut (SlipxHub
1 1/2"
ABS 800 - Closet Flange (Hub)
4" x 3"	4" x 4"
ABS 800Ko - Closet Flange with Knock Out (Hub)
4" x 3"
ABS 800S - Closet Flange with Stop (Hub)
4" x 3"
ABS 801 - Closet Flange, Reducing (SPG)
4" x 3"
ABS 808 - Closet Flange, Male (MPT)
4" x 3"
ABS 811-KO-Closet Flange, Adj w/Meta/Plasticl Ring
4" x 3"
ABS 811–Closet Flange, Adj Metal/Plstc Ring (Hub
4" x 3"	4" x 4"
ABS 811P - Closet Flange, Adj w/ABS Ring
4" x 3", 4" x 4"
ABS 812-Closet Flange, Adj
4" x 3"	4" x 4"
ABS 812P - Closet Flange, Adj Plastic Ring
4" x 3"
ABS 815 - Flush Closet Flange
4" x 4"/4" x 3"
ABS 815Ko - Flush Closet Flange with Knockout[2]
4" x 4"/4" x 3"
ABS 820-Offset Flange, Adj
4" x 3"
ABS 820P - Offset Flange, Adj Plastic Ring
4" x 3"
ABS 824-Closet Flange, Adjust. w/Metal Ring
4"
ABS 900-Swivel Tray Plug Adapter w/Washer(SPGxFPT)
1 1/2"
ABS 900x - ABS Ext Swivel Tray Adp
1 1/2"
ABS 910-Swivel Tray Plug Adapter w/Washer(SPGxFPT)
1 1/2"
[1] Plain End: Joint can be made with compression gasket only. [3] Furnished with 1 1/2 and 1 1/2 x 1 1/4 Polyethylene nut/washer combination. [2] Fits Over 3'' Pipe or Inside 4'' Pipe. @ A letter after the part number designates the following: X - Metal Ring/Plastic Ring R - Reducing P - Plastic Ring W - Washer ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. **** These fitting products may also be represented by the trade names: Charlotte Pipe and Foundry Company®, Charlotte Plastics®, Charlotte Pipe®, Charlotte®, Charlotte or Char®.
Pipe~	ABS	Charlotte Pipe®***	CSA B181.1
1 1/4" - 6" Sch 40
~ Product is authorized to bear the cNSF Mark. *** These pipe products may include the production location code PLUT in the trade name.

Dura Plastic Products, Inc
533 East Third Street
Beaumont, CA 92223
United States
951-845-3161

Facility : # 1 USA

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement* ¢

ABS

DWV, SW

i-Fuse ABS Medium Bodied Yellow Cement

CSA B181.1

! Product is Certified whether or not it bears the U.P. Code Mark.
* Cements Certified to CSA B181.1 must be yellow in color.
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** Cements Certified to CSA B181.2, CSA B137.3 must be gray in color.
*** Cements Certified to CSA B137.6 must be clear or yellow oxide in color.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    i-Fuse Clear or Purple Primers.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    i-Fuse Clear or Purple Primers.
[4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61
    was determined based on the testing of pipe and fittings assembled using the cement and
    i-Fuse Blue primer.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Guangdong Liansu Technology Industrial Co., Ltd. DBA Lesso America, Inc.
Liansu Industrial Estate
Longjiang Town, Shunde Zone
Foshan, Guangdong 528318
China
86 757 2388 8337
Visit this company's website

Facility : # 2 China

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢ [1]	ABS	Lesso	CSA B181.1
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")	LN324-020 (2")	LN324-030 (3")	LN324-040 (4")
LN324-060 (6")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")	LN326-020 (2")	LN326-030 (3")	LN326-040 (4")
45° Double Wye (All HUB)
LN611-015 (1 1/2")	LN611-020 (2")	LN611-030 (3")	LN611-030L (3")
LN611-040 (4")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")	LN321-015 (1 1/2")	LN321-020L (2")	LN321-030L (3")
LN321-040 (4")	LN321-060 (6")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")	LN321-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")	LN321-020S (2")	LN321-030S (3")	LN321-040S (4")
45° Reducing Double Wye (All HUB)
LN612-251 (2" x 2" x 1 1/2" x 1 1/2")	LN612-337 (3" x 3" x 1 1/2" x 1 1/2")	LN612-338 (3" x 3" x 2" x 2")	LN612-420 (4" x 4" x 2" x 2")
LN612-422 (4" x 4" x 3" x 3")	LN612-532 (6" x 6" x 4" x 4")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")	LN603-337 (3" x 3" x 1 1/2")	LN603-338 (3" x 3" x 2")	LN603-420 (4" x 4" x 2")
LN603-422 (4" x 4" x 3")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")	LN601-337L (3" x 3" x 1 1/2")	LN601-338L (3" x 3" x 2")	LN601-419 (4" x 4" x 1 1/2")
LN601-420L (4" x 4" x 2")	LN601-422L (4" x 4" x 3")	LN601-530 (6" x 6" x 3")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")	LN323-015 (1 1/2")	LN323-020L (2")	LN323-030L (3")
LN323-040 (4")	LN323-060 (6")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")	LN323-030 (3")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")	LN323-020S (2")	LN323-030S (3")	LN323-040S (4")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")	LN602-020 (2")	LN602-030 (3")	LN602-040 (4")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")	LN600-015 (1 1/2")	LN600-015L (1 1/2")	LN600-020 (2")
LN600-020L (2")	LN600-030 (3")	LN600-030L (3")	LN600-040 (4")
LN600-040L (4")	LN600-060 (6")	LN601-241 (2" x 1 1/2" x 1 1/2")	LN601-251 (2" x 2" x 1 1/2")
LN601-337 (3" x 3" x 1 1/2")	LN601-338 (3" x 3" x 2")	LN601-420 (4"x 4" x 2")	LN601-422 (4" x 4" x 3")
LN601-532 (6" x 6" x 4")
60° Elbow (HUB x HUB)
LN319-015 (1 1/2")	LN319-040 (4")	LN319-030 (3")	LN319-020 (2")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")	LN320-020 (2")	LN320-030 (3")	LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")	LN327-020 (2")	LN327-030 (3")	LN327-040 (4")
LN327-241 (2" x 1 1/2" x 1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")	LN300-015 (1 1/2")	LN300-020 (2")	LN300-030 (3")
LN300-040 (4")	LN300-060 (6")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")	LN303-338 (3" x 3" x 2")	LN303-420 (4" x 4" x 2")
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")	LN300S-338 (3" x 3" x 2")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")	LN300-015S (1 1/2")	LN300-020S (2")	LN300-030S (3")
LN300-040S (4")	LN300-060S (6")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")	LN304-015 (1 1/2")	LN304-020 (2")	LN304-030 (3")
LN304-040 (4")
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-015 (1 1/2")	LN309-020 (2")	LN309-030 (3")	LN309-040 (4")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Reducing Closet St. Elbow w/ Test Cap(HUBxSpg)
LN330X-342 (3" x 4")	LN330X-422 (4" x 3")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")	LN330-422 (4" x 3")
90° Street Elbow (HUB x Spg)
LN302-012 (1 1/4")	LN302-015 (1 1/2")	LN302-020 (2")	LN302-030 (3")
LN302-040 (4")	LN302-060 (6")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")	LN302-020S (2")	LN302-030S (3")	LN302-040S (4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")	LN331-015 (1 1/2")	LN331-020 (2")	LN331-030 (3")
LN331-040 (4")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")	LN120-212 (1 1/2" x 1 1/4")
Adapter Bushing (DWV Spg x S&D HUB)
LN118-030 (3")	LN118-040 (4")
Cap (FIPT)
LN116F-015 (1 1/2")
Cap (HUB)
LN116-012 (1 1/4")	LN116-015 (1 1/2")	LN116-020 (2")	LN116-030 (3")
LN116-040 (4")	LN116-060 (6")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spg x HUB)
LN124-020 (2")	LN124-040 (4")	LN124-422 (4" x 3")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")	LN105-015 (1 1/2")	LN105-020 (2")	LN105-030 (3")
LN105-040 (4")	LN105-060 (6")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")	LN105X-015 (1 1/2")	LN105X-020 (2")	LN105X-030 (3")
LN105X-040 (4")	LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")	LN106-015 (1 1/2")	LN106-020 (2")	LN106-025 (2 1/2")
LN106-030 (3")	LN106-035 (3 1/2")	LN106-040 (4")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
Closet Flange (FIPT)
LN830-422 (4 x 3")
Closet Flange (HUB)
LN800-040 (4" x 4")	LN800-422 (4" x 3")	LN800-422L (4" x 3")
Closet Flange (MIPT)
LN831-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (H)!
LN811-040 (4")	LN811-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-040 (4")	LN812-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")	LN810P-040 (4" x 4")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-040 (4" x 4")	LN812P-422 (4" x 3")
Closet Flange w/ Knockout & Pipe Stop (HUB)
LN815K-040 (4" x 4"/ 4" x 3")
Closet Flange w/ Knockout Test Plug (Hub)
LN800T-040 (4" x 4")	LN800T-422 (4" x 3")	LN800T-422L (4" x 3")
Closet Flange w/ Pipe Stop (HUB)
LN815PS-040 (4" x 4" / 4" x 3")
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-040 (4" x 4")	LN800R-422 (4" x 3")	LN800R-422L (4" x 3")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-040C (4")	LN800T-422C (4" x 3")	LN800T-422CL (4" x 3")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring*
LN820P-422 (4" x 3")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-015 (1 1/2")	LN501-020 (2")	LN501-030 (3")	LN501-040 (4")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")	LN106C-020 (2")	LN106C-030 (3")	LN106C-040 (4")
Coupling (HUB x HUB)
LN100-012 (1 1/4")	LN100-015 (1 1/2")	LN100-020 (2")	LN100-030 (3")
LN100-040 (4")	LN100-060 (6")
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")	LN601-210 (1-1/2" × 1-1/2" × 3/4")
Double Fixture Fitting (All HUB)
LN500-020 (2")	LN500-030 (3")	LN500-241 (2" x 1 1/2" x 1 1/2" x 1-1/2")	LN500-251 (2" x 2" x 1 1/2" x 1 1/2")
LN500-257 (2" x 1 1/2" x 2" x 2")	LN500-338 (3" x 2" x 3" x 3")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")	LN428-020 (2")	LN428-030 (3")	LN428-040 (4")
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Double Sanitary Tee w/ R & L Side Inlet (All HUB)
LN439-338 (3" x 3" x 3" x "3 x 2" x 2")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-337 (3" x 3" x 3" x 3" x1 1/ 2")	LN438-338 (3" x 3" x 3" x 3" x 2")	LN438-420 (4" x 4" x 4" x 4" x 2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
Expansion Joint (HUB x HUB)
LNH119-015 (1 1/2")	LNH119-020 (2")	LNH119-030 (3")	LNH119-040 (4")
Expansion Joint (HUB x Spg)
LNH119S-030 (3")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")	LN101-015 (1 1/2")	LN101-020 (2")	LN101-030 (3")
LN101-040 (4")	LN101-060 (6")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")	LN108-210 (1 1/2" x 3/4")	LN108-212 (1 1/2" x 1 1/4")	LN108-251 (2" x 1 1/2")
LN108-337 (3" x 1 1/2")	LN108-338 (3" x 2")	LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")	LN107-251 (2" x 1 1/2")	LN107-337 (3" x 1 1/2")	LN107-338 (3" x 2")
LN107-419 (4" x 1 1/2")	LN107-420 (4" x 2")	LN107-422 (4" x 3")	LN107-532 (6" x 4")
Flush C.O. Plug (MPT)
LN110-020 (2")	LN110-030 (3")	LN110-040 (4")
Flush Closet Flange (Inside 4", Outside 3")
LN815-040 (4" x 4" / 4" x 3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")	LN123-030 (3")	LN123-040 (4")
Hub Adapter Cast Iron Increaser (HUBx SJ)
LN123R-213 (1 1/2" x 2")	LN123R-342 (3" x 4")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")	LN711M-212 (1 1/2" x 1 1/4")
Male Adapter (HUB x MIPT)
LN109-015 (1 1/2")	LN109-020 (2")	LN109-030 (3")	LN109-040 (4")
LN109-012 (1 1/4")	LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")	LN111-015 (1 1/2")	LN111-020 (2")	LN111-030 (3")
LN111-040 (4")	LN111-212 (1 1/2" x 1 1/4")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")	LN119-030 (3")	LN119-040 (4")	LN119-251 (2" x 1 1/2")
LN119-422 (4" x 3")
Offset Closet Flange,w/ Adjustable Metal Ring (H)
LN820-040 (4")	LN820-422 (4" x 3")
P-Trap (Hub x Hub x Cleanout)
LN707X-015 (1 1/2")	LN707X-020 (2")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")	LN706X-020 (2")	LN706X-030 (3")	LN706X-040 (4")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")	LN708P-015 (1 1/2")	LN708P-020 (2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")	LN102-251 (2" x 1 1/2")	LN102-337 (3" x 1-1/2")	LN102-338 (3" x 2")
LN102-419 (4" x 1 1/2")	LN102-420L (4" x 2")	LN102-422L (4" x 3")
Pivoting P-Trap w/ Plug (HUB×HUB×CLEANOUT W/PLUG)
LN707S-015 1 1/2"
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")	LN106R-015 (1 1/2")	LN106R-020 (2")	LN106R-025 (2 1/2")
LN106R-030 (3")	LN106R-035 (2 1/2")	LN106R-040 (4")	LN106R-060 (6")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")	LN502-251 (2" x 2" x 1 1/2")	LN502-257 (2" x 1 1/2" x 2")	LN502-337 (3" x 3" x 1 1/2")
LN502-338 (3" x 3" x 2")	LN502-420 (4" x 4" x 2")	LN502-422 (4" x 4" x 3")
Reducing Closet Flange (Spg)
LN801-422 (4" x 3")
Reducing Coupling (HUB x HUB)
LN102-420 (4" x 2")	LN102-422 (4" x 3")
Reducing Double Sanitary Tee (All HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")	LN429-323 (3" x 3" x 2" x 1 1/2")	LN429-337 (3" x 3" x 1 1/2" x 1 1/2")	LN429-338 (3" x 3" x 2" x 2")
LN429-420 (4" x 4" x 2" x 2")	LN429-422 (4" x 4" x 3" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")	LN401-222 (1 1/2" x 1 1/4" x 1 1/4")	LN401-225 (11/2" x 1 1/4" x 1 1/2")	LN401-241L (2" x 1 1/2" x 1 1/2")
LN401-251L (2" x 2" x 1 1/2")	LN401-257L (2" x 1 1/2" x 2")	LN401-337 (3" x 3" x 1 1/2")	LN401-338L (3" x 3" x 2")
LN401-419 (4" x 4" x 1 1/2")	LN401-420 (4" x 4" x 2")	LN401-422 (4" x 4" x 3")	LN401-532 (6" x 6" x 4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-251 (2" x 2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-337 (3" x 3" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-257 (2" x 1 1/2" x 2")	LN404-338 (3" x 3" x 2")
Reducing Vent Tee (HUB x HUB x HUB)
LN441-337 (3" x 3" x 1 1/2")	LN441-338 (3" x 3" x 2")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")	LN130-020 (2")	LN130-030 (3")	LN130-040 (4")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")	LN400-012L (1 1/4")	LN400-015 (1 1/2")	LN400-015L (1 1/2")
LN400-020 (2")	LN400-020L (2")	LN400-030 (3")	LN400-040 (4")
LN400-040L (4")	LN400-060 (6")	LN401-241 (2" x 1 1/2" x 1 1/2")	LN401-251 (2" x 2" x 1 1/2")
LN401-257 (2" x 1 1/2" x 2")	LN401-338 (3" x 3" x 2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-329 (3" x 3" x 2" x 2")	LN416-337 (3" x 3" x 3" x 1 1/2")	LN416-338 (3" x 3" x 3" x 2")	LN416-420 (4" x 4" x 4" x 2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-329 (3" x 3" x 2" x 2")	LN417-337 (3" x 3" x 3" x 1 1/2")	LN417-338 (3" x 3" x 3" x 2")	LN417-420 (4" x 4" x 4" x 2")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")	LN418-338 (3" x 3" x 3" x 2" x 2")	LN418-420 (4" x 4" x 4" x 2" x 2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")	LN117S-422 (4" x 3")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Slip Plug (Spg)
LN110S-015 (1 1/2")	LN110S-020 (2")	LN110S-025 (2 1/2")	LN110S-030 (3")
LN110S-035 (3 1/2")	LN110S-040 (4")
Snap-In Cleanout w/ Plug
LN106W-040 (4")	LN106W-030 (3")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")	LN403-020 (2")	LN403-030 (3")	LN403-040 (4")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")	LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")	LN444X-020L (2")	LN444X-030L (3")	LN444X-040L (4")
LN444X-427 (4"x 3" x 4")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")	LN444X-020 (2")	LN444X-030 (3")	LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")	LN445-015L (1 1/2")	LN445-020 (2")	LN445-020L (2")
LN445-030 (3")	LN445-030L (3")	LN445-040 (4")	LN445-040L (4")
LN445-427 (4" x 3" x 4")
Threaded Cap (FIPT)
LN135-015 (1 1/2")	LN135-020 (2")	LN135-030 (3")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")	LN103X-015 (1 1/2")	LN103X-020 (2")	LN103X-212 (1 1/2" x 1-1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")	LN104W-020 (2")	LN104C-212 (1 1/2" x 1 1/4")	LN104W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103W-015 (1 1/2")	LN103C-020 (2")	LN103W-020 (2")	LN103C-212 (1 1/2 x 1 1/4")
LN103W-212 (1 1/2 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-012 (1 1/4")	LN104X-015 (1 1/2")	LN104X-020 (2")	LN104X-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-012 (1 1/4")	LN104P-015 (1 1/2")	LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")	LN103P-015 (1 1/2")	LN103P-212 (1 1/2" x 1 1/4")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Tray Plug Adapter (Spigot x Female NPSM)
LN113-015 (1 1/2")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")	LN900-015 (1 1/2")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-030 (3")	LN448-040 (4")
Union (HUB x HUB)
LN126-015 (1 1/2")	LN126-020 (2")	LN126-030 (3")	LN126-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")	LN441-020 (2")	LN441-030 (3")	LN441-040 (4")
! Epoxy coated * 1 1/2" Offset ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢ [1]	ABS	Lesso	CSA B181.1
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")
Snap-In Cleanout w/ Plug
LN106W-030 (3")	LN106W-040 (4")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-030 (3")
60° Elbow (HUB x HUB)
LN319-040 (4")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
60° Elbow (HUB x HUB)
LN319-015 (1 1/2")	LN319-020 (2")	LN319-030 (3")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-040 (4")
Reducing Double Sanitary Tee (All HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")
Double Fixture Fitting (All HUB)
LN500-020 (2")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-012 (1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")
Tray Plug Adapter (Spigot x Female NPSM)
LN113-015 (1 1/2")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")
Union (HUB x HUB)
LN126-015 (1 1/2")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")
Slip Plug (Spg)
LN110S-015 (1 1/2")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")
Pivoting P-Trap w/ Plug (HUB×HUB×CLEANOUT W/PLUG)
LN707S-015 1 1/2"
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-015 (1 1/2")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-251 (2" x 2" x 1 1/2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-329 (3" x 3" x 2" x 2")
Reducing Double Sanitary Tee (All HUB)
LN429-323 (3" x 3" x 2" x 1 1/2")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-337 (3" x 3" x 3" x 3" x1 1/ 2")
Double Sanitary Tee w/ R & L Side Inlet (All HUB)
LN439-338 (3" x 3" x 3" x "3 x 2" x 2")
Reducing Vent Tee (HUB x HUB x HUB)
LN441-337 (3" x 3" x 1 1/2")
Double Fixture Fitting (All HUB)
LN500-030 (3")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-337 (3" x 3" x 1 1/2")
45° Reducing Double Wye (All HUB)
LN612-251 (2" x 2" x 1 1/2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-337 (3" x 3" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-040C (4")
Closet Flange w/ Adjustable Metal Ring (H)!
LN811-040 (4")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-040 (4")
Offset Closet Flange,w/ Adjustable Metal Ring (H)
LN820-040 (4")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring*
LN820P-422 (4" x 3")
Closet Flange w/ Knockout & Pipe Stop (HUB)
LN815K-040 (4" x 4"/ 4" x 3")
Closet Flange w/ Pipe Stop (HUB)
LN815PS-040 (4" x 4" / 4" x 3")
Closet Flange (FIPT)
LN830-422 (4 x 3")
Closet Flange (MIPT)
LN831-422 (4" x 3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")
Hub Adapter Cast Iron Increaser (HUBx SJ)
LN123R-213 (1 1/2" x 2")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")
Flush C.O. Plug (MPT)
LN110-020 (2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Reducing Coupling (HUB x HUB)
LN102-420 (4" x 2")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103W-015 (1 1/2")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-012 (1 1/4")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")
45° Double Wye (All HUB)
LN611-015 (1 1/2")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Elbow-Short Turn (HUB x HUB)
LN300-015S (1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")
90° Long Sweep Elbow (HUB x HUB)
LN304-015 (1 1/2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")
90° Street Elbow (HUB x Spg)
LN302-012 (1 1/4")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Vent Elbow (HUB x HUB)
LN331-015 (1 1/2")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")
Adapter Bushing (DWV Spg x S&D HUB)
LN118-030 (3")
Cap (FIPT)
LN116F-015 (1 1/2")
Cap (HUB)
LN116-012 (1 1/4")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spg x HUB)
LN124-020 (2")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-015 (1 1/2")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")
Closet Flange (HUB)
LN800-040 (4" x 4")
Closet Flange w/ Knockout Test Plug (Hub)
LN800T-040 (4" x 4")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-015 (1 1/2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")
Coupling (HUB x HUB)
LN100-012 (1 1/4")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")
Expansion Joint (HUB x HUB)
LNH119-015 (1 1/2")
Expansion Joint (HUB x Spg)
LNH119S-030 (3")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")
Cleanout Adapter (Spg x FIPT)
LN105-015 (1 1/2")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")
Male Adapter (HUB x MIPT)
LN109-015 (1 1/2")
Threaded Cap (FIPT)
LN135-015 (1 1/2")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")
Male Adapter (Spg x MIPT)
LN111-015 (1 1/2")
P-Trap (Hub x Hub x Cleanout)
LN707X-015 (1 1/2")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-422 (4" x 3")
90° Reducing Closet St. Elbow w/ Test Cap(HUBxSpg)
LN330X-342 (3" x 4")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-251 (2" x 2" x 1 1/2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-329 (3" x 3" x 2" x 2")
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-040 (4" x 4")
Reducing Closet Flange (Spg)
LN801-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-040 (4" x 4")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-040 (4" x 4")
Flush Closet Flange (Inside 4", Outside 3")
LN815-040 (4" x 4" / 4" x 3")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Plug with Gasket (MIPT)
LN106R-015 (1 1/2")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-257 (2" x 1 1/2" x 2")
Reducing Double Sanitary Tee (All HUB)
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Test Tee (HUB x HUB x FIPT)
LN445-015L (1 1/2")
Sanitary Tee (HUB x HUB x HUB)
LN400-012L (1 1/4")
Reducing Double Sanitary Tee (All HUB)
LN429-338 (3" x 3" x 2" x 2")
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-020 (2")
90° Double Elbow (HUB x HUB x HUB)
LN327-020 (2")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-222 (1 1/2" x 1 1/4" x 1 1/4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-257 (2" x 1 1/2" x 2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-337 (3" x 3" x 3" x 1 1/2")
Reducing Double Sanitary Tee (All HUB)
LN429-420 (4" x 4" x 2" x 2")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-338 (3" x 3" x 3" x 3" x 2")
Reducing Vent Tee (HUB x HUB x HUB)
LN441-338 (3" x 3" x 2")
Double Fixture Fitting (All HUB)
LN500-241 (2" x 1 1/2" x 1 1/2" x 1-1/2")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-338 (3" x 3" x 2")
45° Reducing Double Wye (All HUB)
LN612-337 (3" x 3" x 1 1/2" x 1 1/2")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-212 (1 1/2" x 1 1/4")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-422C (4" x 3")
Closet Flange w/ Adjustable Metal Ring (H)!
LN811-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-422 (4" x 3")
Offset Closet Flange,w/ Adjustable Metal Ring (H)
LN820-422 (4" x 3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-030 (3")
Hub Adapter Cast Iron Increaser (HUBx SJ)
LN123R-342 (3" x 4")
Tray Plug Adapter - Spigot
LN900-015 (1 1/2")
45° Elbow (HUB x HUB)
LN321-015 (1 1/2")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-020S (2")
Flush C.O. Plug (MPT)
LN110-030 (3")
Reducing Coupling (HUB x HUB)
LN102-422 (4" x 3")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103C-020 (2")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-015 (1 1/2")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104W-020 (2")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-015 (1 1/2")
22 1/2° Street Elbow (HUB x Spg)
LN326-020 (2")
45° Double Wye (All HUB)
LN611-020 (2")
45° Elbow-Short Turn (HUB x HUB)
LN321-020S (2")
45° Elbow Long-Turn (HUB x HUB)
LN321-030 (3")
45° Wye (HUB x HUB x HUB)
LN600-015 (1 1/2")
45° Street Elbow (HUB x Spg)
LN323-015 (1 1/2")
45° Street Wye (Spg x HUB x HUB)
LN602-020 (2")
90° Elbow-Short Turn (HUB x HUB)
LN300-020S (2")
90° Elbow (HUB x HUB)
LN300-015 (1 1/2")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-338 (3" x 3" x 2")
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-338 (3" x 3" x 2")
90° Long Sweep Elbow (HUB x HUB)
LN304-020 (2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-020S (2")
90° Street Elbow (HUB x Spg)
LN302-015 (1 1/2")
90° Vent Elbow (HUB x HUB)
LN331-020 (2")
ABS-Copper Adapter (HUB x SJ)
LN120-212 (1 1/2" x 1 1/4")
Adapter Bushing (DWV Spg x S&D HUB)
LN118-040 (4")
Cap (HUB)
LN116-015 (1 1/2")
Cast Iron HUB Adapter (Spg x HUB)
LN124-040 (4")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-020 (2")
Cleanout Plug (MIPT)
LN106-015 (1 1/2")
22 1/2° Elbow (HUB x HUB)
LN324-020 (2")
Closet Flange (HUB)
LN800-422 (4" x 3")
Closet Flange w/ Knockout Test Plug (Hub)
LN800T-422 (4" x 3")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-020 (2")
Counter Sunk Plug (MIPT)
LN106C-020 (2")
Coupling (HUB x HUB)
LN100-015 (1 1/2")
Double Sanitary Tee (All HUB)
LN428-020 (2")
Expansion Joint (HUB x HUB)
LNH119-020 (2")
Female Adapter (HUB x FIPT)
LN101-015 (1 1/2")
Cleanout Adapter (Spg x FIPT)
LN105-020 (2")
Flush Adapter (Spg x FIPT)
LN108-210 (1 1/2" x 3/4")
Flush Bushing (Spg x HUB)
LN107-251 (2" x 1 1/2")
Male Adapter (HUB x MIPT)
LN109-020 (2")
Threaded Cap (FIPT)
LN135-020 (2")
60° Street Elbow (HUB x Spg)
LN320-020 (2")
Male Adapter (Spg x MIPT)
LN111-020 (2")
P-Trap (Hub x Hub x Cleanout)
LN707X-020 (2")
P-Trap (Hub x Hub)
LN706X-020 (2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-015 (1 1/2")
Plug with Gasket (MIPT)
LN106R-020 (2")
90° Reducing Closet St. Elbow w/ Test Cap(HUBxSpg)
LN330X-422 (4" x 3")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-337 (3" x 3" x 1 1/2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-251 (2" x 1 1/2")
Repair Coupling (HUB x HUB)
LN130-020 (2")
Sanitary Tee (HUB x HUB x HUB)
LN400-015 (1 1/2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-337 (3" x 3" x 3" x 1 1/2")
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-422 (4" x 3")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-338 (3" x 3" x 3" x 2" x 2")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-422 (4" x 3")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-020 (2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout)
LN444X-020 (2")
Test Tee (HUB x HUB x FIPT)
LN445-020 (2")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-015 (1 1/2")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-015 (1 1/2")
45° Reducing Wye (HUB x HUB x HUB)
LN601-337L (3" x 3" x 1 1/2")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-020L (2")
Union (HUB x HUB)
LN126-020 (2")
Vent Tee (HUB x HUB x HUB)
LN441-020 (2")
Slip Plug (Spg)
LN110S-020 (2")
No-Hub Adapter (Spg x HUB)
LN119-030 (3")
Dishwasher Y (Hub)
LN601-210 (1-1/2" × 1-1/2" × 3/4")
45° Street Elbow (HUB x Spg)
LN323-020L (2")
Flush Adapter (Spg x FIPT)
LN108-212 (1 1/2" x 1 1/4")
Plug with Gasket (MIPT)
LN106R-025 (2 1/2")
Sanitary Tee (HUB x HUB x HUB)
LN400-015L (1 1/2")
45° Elbow (HUB x HUB)
LN321-020L (2")
Double Fixture Fitting (All HUB)
LN500-251 (2" x 2" x 1 1/2" x 1 1/2")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-420 (4" x 4" x 2")
45° Reducing Double Wye (All HUB)
LN612-338 (3" x 3" x 2" x 2")
Test Tee (HUB x HUB x FIPT)
LN445-020L (2")
45° Elbow (HUB x HUB)
LN321-030L (3")
45° Street Elbow (HUB x Spg)
LN323-030L (3")
22 1/2° Street Elbow (HUB x Spg)
LN326-030 (3")
45° Double Wye (All HUB)
LN611-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-030S (3")
45° Wye (HUB x HUB x HUB)
LN600-015L (1 1/2")
45° Street Elbow (HUB x Spg)
LN323-040 (4")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")
45° Street Wye (Spg x HUB x HUB)
LN602-030 (3")
90° Elbow-Short Turn (HUB x HUB)
LN300-030S (3")
90° Elbow (HUB x HUB)
LN300-020 (2")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-420 (4" x 4" x 2")
90° Long Sweep Elbow (HUB x HUB)
LN304-030 (3")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-030S (3")
90° Street Elbow (HUB x Spg)
LN302-020 (2")
90° Vent Elbow (HUB x HUB)
LN331-030 (3")
Cap (HUB)
LN116-020 (2")
Cast Iron HUB Adapter (Spg x HUB)
LN124-422 (4" x 3")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-030 (3")
Cleanout Plug (MIPT)
LN106-020 (2")
22 1/2° Elbow (HUB x HUB)
LN324-030 (3")
Closet Flange (HUB)
LN800-422L (4" x 3")
Closet Flange w/ Knockout Test Plug (Hub)
LN800T-422L (4" x 3")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-030 (3")
Counter Sunk Plug (MIPT)
LN106C-030 (3")
Coupling (HUB x HUB)
LN100-020 (2")
Double Sanitary Tee (All HUB)
LN428-030 (3")
Expansion Joint (HUB x HUB)
LNH119-030 (3")
Female Adapter (HUB x FIPT)
LN101-020 (2")
Cleanout Adapter (Spg x FIPT)
LN105-030 (3")
Flush Adapter (Spg x FIPT)
LN108-251 (2" x 1 1/2")
Flush Bushing (Spg x HUB)
LN107-337 (3" x 1 1/2")
Male Adapter (HUB x MIPT)
LN109-030 (3")
Threaded Cap (FIPT)
LN135-030 (3")
60° Street Elbow (HUB x Spg)
LN320-030 (3")
Male Adapter (Spg x MIPT)
LN111-030 (3")
P-Trap (Hub x Hub)
LN706X-030 (3")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-020 (2")
Plug with Gasket (MIPT)
LN106R-030 (3")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-338 (3" x 3" x 2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-337 (3" x 1-1/2")
Repair Coupling (HUB x HUB)
LN130-030 (3")
Sanitary Tee (HUB x HUB x HUB)
LN400-020 (2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-338 (3" x 3" x 3" x 2")
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-422L (4" x 3")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-420 (4" x 4" x 4" x 2" x 2")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-030 (3")
Test Tee (HUB x HUB x Cleanout)
LN444X-030 (3")
Test Tee (HUB x HUB x FIPT)
LN445-030 (3")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-212 (1 1/2" x 1 1/4")
45° Reducing Wye (HUB x HUB x HUB)
LN601-338L (3" x 3" x 2")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-030L (3")
Union (HUB x HUB)
LN126-030 (3")
Vent Tee (HUB x HUB x HUB)
LN441-030 (3")
Slip Plug (Spg)
LN110S-025 (2 1/2")
No-Hub Adapter (Spg x HUB)
LN119-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-030 (3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-225 (11/2" x 1 1/4" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-338 (3" x 3" x 2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-338 (3" x 3" x 3" x 2")
Reducing Double Sanitary Tee (All HUB)
LN429-422 (4" x 4" x 3" x 3")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-420 (4" x 4" x 4" x 4" x 2")
Double Fixture Fitting (All HUB)
LN500-257 (2" x 1 1/2" x 2" x 2")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-422 (4" x 4" x 3")
45° Reducing Double Wye (All HUB)
LN612-420 (4" x 4" x 2" x 2")
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-030 (3")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-422CL (4" x 3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-040 (4")
45° Elbow (HUB x HUB)
LN321-040 (4")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-030S (3")
Flush C.O. Plug (MPT)
LN110-040 (4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103W-020 (2")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-020 (2")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-020 (2")
45° Double Wye (All HUB)
LN611-030L (3")
Cleanout Plug (MIPT)
LN106-025 (2 1/2")
Plug with Gasket (MIPT)
LN106R-035 (2 1/2")
45° Reducing Wye (HUB x HUB x HUB)
LN601-419 (4" x 4" x 1 1/2")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-030L (3")
Sanitary Tee (HUB x HUB x HUB)
LN400-020L (2")
22 1/2° Elbow (HUB x HUB)
LN324-040 (4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104W-212 (1 1/2 x 1 1/4")
45° Double Wye (All HUB)
LN611-040 (4")
45° Elbow-Short Turn (HUB x HUB)
LN321-040S (4")
45° Wye (HUB x HUB x HUB)
LN600-020 (2")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-030 (3")
45° Street Wye (Spg x HUB x HUB)
LN602-040 (4")
90° Elbow-Short Turn (HUB x HUB)
LN300-040S (4")
90° Elbow (HUB x HUB)
LN300-030 (3")
90° Long Sweep Elbow (HUB x HUB)
LN304-040 (4")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-040S (4")
90° Street Elbow (HUB x Spg)
LN302-030 (3")
90° Vent Elbow (HUB x HUB)
LN331-040 (4")
Cap (HUB)
LN116-030 (3")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-040 (4")
Cleanout Plug (MIPT)
LN106-030 (3")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-420 (4" x 4" x 4" x 2")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-040 (4")
Counter Sunk Plug (MIPT)
LN106C-040 (4")
Coupling (HUB x HUB)
LN100-030 (3")
Double Sanitary Tee (All HUB)
LN428-040 (4")
Expansion Joint (HUB x HUB)
LNH119-040 (4")
Female Adapter (HUB x FIPT)
LN101-030 (3")
Cleanout Adapter (Spg x FIPT)
LN105-040 (4")
Flush Adapter (Spg x FIPT)
LN108-337 (3" x 1 1/2")
Flush Bushing (Spg x HUB)
LN107-338 (3" x 2")
Male Adapter (HUB x MIPT)
LN109-040 (4")
Male Adapter (Spg x MIPT)
LN111-040 (4")
P-Trap (Hub x Hub)
LN706X-040 (4")
Plug with Gasket (MIPT)
LN106R-040 (4")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-420 (4" x 4" x 2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-338 (3" x 2")
Repair Coupling (HUB x HUB)
LN130-040 (4")
Sanitary Tee (HUB x HUB x HUB)
LN400-030 (3")
45° Reducing Double Wye (All HUB)
LN612-422 (4" x 4" x 3" x 3")
Test Tee (HUB x HUB x Cleanout)
LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-040 (4")
45° Reducing Wye (HUB x HUB x HUB)
LN601-420L (4" x 4" x 2")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-040L (4")
Union (HUB x HUB)
LN126-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-040 (4")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-212 (1 1/2 x 1 1/4")
Slip Plug (Spg)
LN110S-030 (3")
No-Hub Adapter (Spg x HUB)
LN119-251 (2" x 1 1/2")
60° Street Elbow (HUB x Spg)
LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-040 (4")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-241L (2" x 1 1/2" x 1 1/2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-420 (4" x 4" x 4" x 2")
Double Fixture Fitting (All HUB)
LN500-338 (3" x 2" x 3" x 3")
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-040 (4")
45° Elbow (HUB x HUB)
LN321-060 (6")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-040S (4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103C-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-212 (1 1/2" x 1-1/4")
22 1/2° Street Elbow (HUB x Spg)
LN326-040 (4")
Cleanout Plug (MIPT)
LN106-035 (3 1/2")
Test Tee (HUB x HUB x FIPT)
LN445-040L (4")
Male Adapter (HUB x MIPT)
LN109-012 (1 1/4")
22 1/2° Elbow (HUB x HUB)
LN324-060 (6")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103W-212 (1 1/2 1 1/4")
45° Street Elbow (HUB x Spg)
LN323-060 (6")
90° Elbow-Short Turn (HUB x HUB)
LN300-060S (6")
90° Elbow (HUB x HUB)
LN300-040 (4")
90° Street Elbow (HUB x Spg)
LN302-040 (4")
Cap (HUB)
LN116-040 (4")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-040 (4")
Coupling (HUB x HUB)
LN100-040 (4")
Female Adapter (HUB x FIPT)
LN101-040 (4")
Cleanout Adapter (Spg x FIPT)
LN105-060 (6")
Flush Adapter (Spg x FIPT)
LN108-338 (3" x 2")
Flush Bushing (Spg x HUB)
LN107-419 (4" x 1 1/2")
Male Adapter (HUB x MIPT)
LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-212 (1 1/2" x 1 1/4")
Plug with Gasket (MIPT)
LN106R-060 (6")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-422 (4" x 4" x 3")
Pipe Increaser-Reducer (HUB x HUB)
LN102-419 (4" x 1 1/2")
Sanitary Tee (HUB x HUB x HUB)
LN400-040 (4")
45° Reducing Double Wye (All HUB)
LN612-532 (6" x 6" x 4" x 4")
Test Tee (HUB x HUB x FIPT)
LN445-427 (4" x 3" x 4")
45° Reducing Wye (HUB x HUB x HUB)
LN601-422L (4" x 4" x 3")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-427 (4"x 3" x 4")
Slip Plug (Spg)
LN110S-035 (3 1/2")
No-Hub Adapter (Spg x HUB)
LN119-422 (4" x 3")
90° Double Elbow (HUB x HUB x HUB)
LN327-241 (2" x 1 1/2" x 1 1/2")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-251L (2" x 2" x 1 1/2")
45° Wye (HUB x HUB x HUB)
LN600-020L (2")
Sanitary Tee (HUB x HUB x HUB)
LN400-040L (4")
45° Wye (HUB x HUB x HUB)
LN600-030 (3")
90° Elbow (HUB x HUB)
LN300-060 (6")
90° Street Elbow (HUB x Spg)
LN302-060 (6")
Cap (HUB)
LN116-060 (6")
Coupling (HUB x HUB)
LN100-060 (6")
Double Sanitary Tee (All HUB)
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-257L (2" x 1 1/2" x 2")
Flush Adapter (Spg x FIPT)
LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-420 (4" x 2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-420L (4" x 2")
Sanitary Tee (HUB x HUB x HUB)
LN400-060 (6")
45° Reducing Wye (HUB x HUB x HUB)
LN601-530 (6" x 6" x 3")
Slip Plug (Spg)
LN110S-040 (4")
Female Adapter (HUB x FIPT)
LN101-060 (6")
Sanitary Tee (HUB x HUB x HUB)
LN401-241 (2" x 1 1/2" x 1 1/2")
45° Wye (HUB x HUB x HUB)
LN600-030L (3")
Flush Bushing (Spg x HUB)
LN107-422 (4" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-337 (3" x 3" x 1 1/2")
Sanitary Tee (HUB x HUB x HUB)
LN401-251 (2" x 2" x 1 1/2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-422L (4" x 3")
45° Wye (HUB x HUB x HUB)
LN600-040 (4")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-338L (3" x 3" x 2")
Sanitary Tee (HUB x HUB x HUB)
LN401-257 (2" x 1 1/2" x 2")
Flush Bushing (Spg x HUB)
LN107-532 (6" x 4")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-419 (4" x 4" x 1 1/2")
45° Wye (HUB x HUB x HUB)
LN600-040L (4")	LN600-060 (6")
Sanitary Tee (HUB x HUB x HUB)
LN401-338 (3" x 3" x 2")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-420 (4" x 4" x 2")
45° Wye (HUB x HUB x HUB)
LN601-241 (2" x 1 1/2" x 1 1/2")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-422 (4" x 4" x 3")
45° Wye (HUB x HUB x HUB)
LN601-251 (2" x 2" x 1 1/2")	LN601-337 (3" x 3" x 1 1/2")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-532 (6" x 6" x 4")
45° Wye (HUB x HUB x HUB)
LN601-338 (3" x 3" x 2")	LN601-420 (4"x 4" x 2")	LN601-422 (4" x 4" x 3")	LN601-532 (6" x 6" x 4")
! Epoxy coated * 1 1/2" Offset ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.

HODA VIETNAM TECHNOLOGY DEVELOPMENT COMPANY LIMITED
No. A03, Lot CN8-1B, Nam Dinh Vu Non-tariff and
Industrial Park (Zone 1)
Dong Hai 2 Ward, Hai An District
Hai Phong,
Vietnam
400 168 2128
400 168 2128

Facility : Hai Phong, Vietnam

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# ¢ § [1] [2] [G]	ABS	Lesso	CSA B181.1
22½° ELBOW(HUB×HUB)
LN324-015 1-1/2"	LN324-020 2"	LN324-030 3"	LN324-040 4"
LN324-060 6"
22½° STREET ELBOW(HUB×SPG)
LN326-015 1-1/2"	LN326-020 2"	LN326-030 3"	LN326-040 4"f
45° STREET WYE (SPG×HUB×HUB)
LN602-015 1 1/2"	LN602-020 2"	LN602-030 3"	LN602-040 4"
45° REDUCING DOUBLE WYE(ALL HUB)
LN612-251 2 x 2 x 1-1/2 x 1-1/2"	LN612-337 3 x 3 x 1-1/2 x 1-1/2"	LN612-338 3×3×2×2"	LN612-420 4 x 4 x 2 x 2"
LN612-422 4 x 4 x 3 x 3"	LN612-532 6 x 6 x 4 x 4"
45° REDUCING STREET WYE(SPG×HUB×HUB)
LN603-251 2 x 2 x 1-1/2"	LN603-337 3 x 3 x 1-1/2"	LN603-338 3 x 3 x 2"	LN603-420 4 x 4 x 2"
LN603-422 4 x 4 x 3"
45° REDUCING WYE(HUB×HUB×HUB)
LN601-241 2×1-1/2×1-1/2"	LN601-251L 2×2×1-1/2"	LN601-251 2×1-1/2×1-1/2"	LN601-337L 3×3×1-1/2"
LN601-337 2×1-1/2×1-1/2"	LN601-338L 3×3×2"	LN601-338 2×1-1/2×1-1/2"	LN601-419 4 x 4 x 1-1/2"
LN601-420L 4×4×2"	LN601-420 2×1-1/2×1-1/2"	LN601-422L 4×4×3"	LN601-422 2×1-1/2×1-1/2"
LN601-530 6 x 6 x 3"	LN601-532 6×6×4"
45° STREET ELBOW (HUB×SPG)
LN323-012 1-1/4"	LN323-015 1-1/2"	LN323-020L 2"	LN323-030L 3"
LN323-040 4"	LN323-060 6"
45° STREET ELBOW-SHORT TURN (HUB×SPG)
LN323-015S 1-1/2"	LN323-020S 2"	LN323-030S 3"	LN323-040S 4"
45° WYE (HUB×HUB×HUB)
LN600-012 1-1/4"	LN600-015L 1-1/2"	LN600-015 1-1/2"	LN600-020L 2"
LN600-020 2"	LN600-030L 3"	LN600-030 3"	LN600-040L 4"
LN600-040 4"	LN600-060 6"
45°DOUBLE WYE(ALL HUB)
LN611-015 1-1/2"	LN611-020 2"	LN611-030L 3"	LN611-030 3"
LN611-040 4"
45°ELBOW (HUB×HUB)
LN321-012 1-1/4"	LN321-015 1-1/2"	LN321-020L 2"	LN321-030L 3"
LN321-040 4"	LN321-060 6"
45°ELBOW-SHORT TURN (HUB×HUB)
LN321-015S 1-1/2"	LN321-020S 2"	LN321-030S 3"	LN321-040S 4"
45°WYE(HUB×HUB×HUB)
LN601-209 1-1/2×1-1/2"×1/2"	LN601-210 1-1/2×1-1/2"×3/4"
60° STREET ELBOW (HUB×SPG)
LN320-015 1-1/2"	LN320-020 2"	LN320-030 3"	LN320-040 4"
60°ELBOW(HUB×HUB)
LN319-015 1-1/2"	LN319-020 2"	LN319-030 3"	LN319-040 4"
90° LONG SWEEP ELBOW,STREET(HUB×SPG)
LN309-020 2"	LN309-030 3"	LN309-040 4"
90° REDUCING CLOSET ELBOW(HUB×HUB)
LN329-422 4×3"
90° REDUCING CLOSET STREET ELBOW (HUB×SPG)
LN330-342 3 x 4"	LN330-422 4 x 3"
90° STREET ELBOW (HUB×SPG)
LN302-012 1-1/4"	LN302-015 1-1/2"	LN302-020 2"	LN302-030 3"
LN302-040 4"	LN302-060 6"
90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
LN310-338 3 x 3 x 2"
90° STREET ELBOW-SHORT TURN (HUB×SPG)
LN302-015S 1-1/2"	LN302-020S 2"	LN302-030S 3"	LN302-040S 4"
90° VENT ELBOW(HUB×HUB)
LN331-012 1-1/4"	LN331-015 1-1/2"	LN331-020 2"	LN331-030 3"
LN331-040 4"
90°ELBOW (HUB×HUB)
LN300-012 1-1/4"	LN300-015 1-1/2"	LN300-020 2"	LN300-030 3"
LN300-040 4"	LN300-060 6"
90°ELBOW W/ LOW HEEL INLET (HUB×HUB×HUB)
LN303-337 3 x 3 x 1-1/2"	LN303-338 3 x 3 x 2"	LN303-420 4 x 4 x 2"	LN304-012 1-1/4"
LN304-015 1-1/2"	LN304-020 2"	LN304-030 3"	LN304-040 4"
90°ELBOW WITH SIDE INLET (HUB×HUB×HUB)
LN300S-337 3 x 3 x 1-1/2"	LN300S-338 3 x 3 x 2"
90°ELBOW-SHORT TURN (HUB×HUB)
LN300-012S 1-1/4"	LN300-015S 1-1/2"	LN300-020S 2"	LN300-030S 3"
LN300-040S 4"	LN300-060S 6"
90°REDUCING CLOSET ST ELBOW W/ TEST CAP (HUB×SPG)
LN330X-342 3 x 4"	LN330X-422 4 x 3"
ABS-COPPER ADAPTER (HUB×SJ)
LN120-015 1-1/2"	LN120-212 1-1/2×1-1/4"
CAP(HUB)
LN116-012 1-1/4"	LN116-015 1-1/2"	LN116-020 2"	LN116-030 3"
LN116-040 4"
CLEANOUT ADAPTER (SPG×FIPT)
LN105-012 1-1/4"	LN105-015 1-1/2"	LN105-020 2"	LN105-030 3"
LN105-040 4"	LN105-060 6"
CLEANOUT ADAPTER W/PLUG(SPG×CLEANOUT W/PLUG)
LN105X-012 1-1/4"	LN105X-015 1-1/2"	LN105X-020 2"	LN105X-030 3"
LN105X-040 4"	LN105X-060 6"
CLEANOUT PLUG(MIPT)
LN106-015 1-1/2"	LN106-020 2"	LN106-025 2-1/2"	LN106-030 3"
LN106-035 3-1/2"	LN106-040 4"
CLEANOUT WYE (HUB×HUB×FIPT)
LN604-015 1-1/2"
CLOSET FLANGE W/ADJUSTABLE METAL RING (H)
LN811-040 4"
CLOSET FLANGE W/ADJUSTABLE METAL RING (S)
LN811-040 4"×4"
CLOSET FLANGE W/ KNOCKOUT TEST PLUG(HUB)
LN800T-040 4 x 4"	LN800T-422L 4 x 3"	LN800T-422 4 x 3"
CLOSET FLANGE W/ PIPE STOP(HUB)
LN815PS-040 4 x 4 / 4 x 3
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING(HUB)
LN810P-040 4 x 4"
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING(SPG)
LN812P-040 4 x 4"	LN812P-422 4 x 3"
CLOSET FLANGE W/KONCKOUT & PIPE STOP(HUB)
LN815K-040 4 x 4 / 4 x 3
CLOSET FLANGE W/RING-PULL TEST PLUG(HUB)
LN800R-040 4 x 4"	LN800R-422L 4 x 3"	LN800R-422 4 x 3"
CLOSET FLANGE W/THREADED TEST PLUG(HUB)
LN800T-040C 4"	LN800T-422CL 4 x 3"	LN800T-422C 4 x 3"
CLOSET FLANGE(FIPT)
LN830-422 4 x 3
CLOSET FLANGE(HUB)
LN800-040 4×4"	LN800-422L 4×3"	LN800-422 4×3"
CLOSET FLANGE(MIPT)
LN831-422 4 x 3"
COMBINATION WYE & 1/8 BEND(ONE PIECE)(HUB×HUB×HUB)
LN501-015 1-1/2"	LN501-020 2"	LN501-030 3"	LN501-040 4"
COMBINATION WYE & 1/8 BEND(TWO PIECE)(HUB×HUB×HUB)
LN503-020 2"
COUPLING (HUB×HUB)
LN100-012 1-1/4"	LN100-015 1-1/2"	LN100-020 2"	LN100-030 3"
LN100-040 4"	LN100-060 6"
DOUBLE 90° ELBOW(HUB×HUB×HUB)
LN327-015 1-1/2"	LN327-020 2"	LN327-030 3"	LN327-040 4"
LN327-241 2 x 1-1/2 x 1-1/2"
DOUBLE FIXTURE FITTING(ALL HUB)
LN500-020 2"	LN500-030 3"	LN500-241 2 x 1-1/2 x 1-1/2 x 1-1/2"	LN500-251 2"×2"×1-1-2"×1-1-2"
LN500-257 2 x 1-1/2 x 2 x 2"	LN500-338 3 x 2 x 3 x 3"
DOUBLE SANITARY TEE W / R & L SIDE INLET(ALL HUB)
LN439-338 3 x 3 x 3 x 3 x 2 x 2"
DOUBLE SANITARY TEE W /SIDE INLET(ALL HUB)
LN438-337 3 x 3 x 3 x 3 x1-1/ 2"	LN438-338 3 x 3 x 3 x 3 x 2"	LN438-420 4 x 4x 4 x 4 x 2"
DOUBLE SANITARY TEE(ALL HUB)
LN428-015 1-1/2"	LN428-020 2"	LN428-030 3"	LN428-040 4"
DRUM TRAP W / CLEANOUT
LN702X-363 3 x 6 x 1-1/2"
EXPANSION JOINT(HUB×HUB)
LNH119-015 1-1/2"	LNH119-020 2"	LNH119-030 3"	LNH119-040 4"
EXPANSION JOINT(HUB×SPG)
LNH119S-030 3"
FEMALE ADAPTER (HUB×FIPT)
LN101-012 1-1/4"	LN101-015 1-1/2"	LN101-020 2"	LN101-030 3"
LN101-040 4"	LN101-060 6"
FLUSH ADAPTER (SPG×FIPT)
LN108-209 1-1/2×1/2"	LN108-210 1-1/2×3/4"	LN108-212 1-1/2 x 1-1/4"	LN108-251 2 x 1-1/2"
LN108-337 3×1-1/2"	LN108-338 3x 2"	LN108-422 4x3"
FLUSH BUSHING(SPG×HUB)
LN107-212 1-1/2×1-1/4"	LN107-251 2×1-1/2"	LN107-337 3×1-1/2"	LN107-338 3×2"
LN107-419 4×1-1/2"	LN107-420 4×2"	LN107-422 4×3"	LN107-532 6×4"
FLUSH C.O. PLUG(MPT)
LN110-020 2"	LN110-030 3"	LN110-040 4"
FLUSH CLOSET FLANGE (INSIDE 4", OUTSIDE 3")
LN815-040 4 x 4 / 4 x 3
HUB ADAPTER CAST IRON (HUB×SJ)
LN123-020 2"	LN123-030 3"	LN123-040 4"
HUB ADAPTER CAST IRON INCREASER(HUB×SJ)
LN123R-213 1-1/2 x 2"	LN123R-342 3 x 4"
LA PATTERN P-TRAP W/UNION&PLASTIC NUT(HUB×SJ)
LN711M-015 1-1/2"	LN711M-212 1-1/2 x 1-1/4"
MALE ADAPTER(HUB×MIPT)
LN109-012 1-1/4"	LN109-015 1-1/2"	LN109-020 2"	LN109-030 3"
LN109-040 4"	LN109-212 1-1/2×1-1/4"
MALE ADAPTER(SPG×MIPT)
LN111-012 1-1/4"	LN111-015 36893	LN111-020 2"	LN111-030 3"
LN111-040 4"	LN111-212 1-1/2×1-1/4"
NO-HUB ADAPTER(SPG×HUB)
LN119-020 2"	LN119-030 3"	LN119-040 4"	LN119-251 2 x 1-1/2"
LN119-422 4 x 3"
P-TRAP W/PLUG(HUB×HUB×CLEANOUT W/PLUG)
LN707X-015 1-1/2"	LN707X-020 2"
P-TRAP W/UNION &C/O(HUB×HUB×C/O)
LN712-015 1-1/2"
P-TRAP W/UNION JOINT(HUB×HUB)
LN708P-012 1-1/4"	LN708P-015 1-1/2"	LN708P-020 2"
P-TRAP(HUB×HUB)
LN706X-015 1-1/2"	LN706X-020 2"	LN706X-030 3"	LN706X-040 4"
PIPE INCREASER-REDUCER (HUBxHUB)
LN102-212 1-1/2×1-1/4"	LN102-251 2×1-1/2"	LN102-337 3×1-1/2"	LN102-338 3×2"
LN102-419 4×1-1/2"	LN102-420L 4×2"	LN102-420 4 x 2"	LN102-422L 4×3"
LN102-422 4×3"
PLUG WITH GASKET(MIPT)
LN106R-012 1-1/4"	LN106R-015 1-1/2"	LN106R-020 2"	LN106R-025 2-1/2"
LN106R-030 3"	LN106R-035 2-1/2"	LN106R-040 4"	LN106R-060 6"
REDUCING CLOSET FLANGE(SPG)
LN801-422 4 x 3"
REDUCING COMBINATION WYE & 1/8 BEND(HUB×HUB×HUB)
LN502-241 2 x 1-1/2 x 1-1/2"	LN502-251 2 x 2 x 1-1/2"	LN502-257 2 x 1-1/2 x 2"	LN502-337 3 x 3 x 1-1/2"
LN502-338 3 x 3 x 2"	LN502-420 4 x 4 x 2"	LN502-422 4 x 4 x 3"
REDUCING DOUBLE SANITARY TEE(ALL HUB)
LN429-251 2×2×1-1/2×1-1/2"	LN429-337 3×3×1-1/2×1-1/2"	LN429-338 3 x 3 x 2 x 2"	LN429-420 4 x 4 x 2 x 2"
LN429-422 4 x 4 x 3 x 3"	LN429-323 3 x 3 x 2 x 1-1/2"
REDUCING SANITARY TEE(HUB×HUB×HUB)
LN401-222 1-1/2 x 1-1/4 x 1-1/4"	LN401-212 1-1/2 x 1-1/2 x 1-1/4"	LN401-225 1-1/2 x 1-1/4 x 1-1/2"	LN401-241L 2×1-1/2×1-1/2"
LN401-241 3×3×2"	LN401-251L 2×2×1-1/2"	LN401-251 3×3×2"	LN401-257L 2×1-1/2×2"
LN401-257 3×3×2"	LN401-337 3×3×1-1/2"	LN401-338L 3×3×2"	LN401-338 3×3×2"
LN401-419 4 x 4 x 1-1/2"	LN401-420 4×4×2"	LN401-422 4×4×3"	LN401-532 6 x 6 x 4"
REDUCING STREET SANITARY TEE(SPG×HUB×HUB)
LN404-241 2×1-1/2×1-1/2"	LN404-251 2×2×1-1/2"	LN404-257 2×1-1/2×2"	LN404-337 3×3×1-1/2"
LN404-338 3 x 3 x 2"
REPAIR COUPLING(HUB×HUB)
LN130-015 1-1/2"	LN130-020 2"	LN130-030 3"	LN130-040 4"
RETURN BEND(HUB×HUB)
LN700-015 1-1/2"	LN700-020 2"	LN700-030 3"	LN700-040 4"
RETURN BEND(HUB×HUB×CLEANOUT W/PLUG)
LN701-015 1-1/2"	LN701-020 2"
SANITARY TEE W / LEFT SIDE INLET(ALL HUB)
LN416-337 3 x 3 x 3 x 1-1/2"	LN416-338 3 x 3 x3 x 2"	LN416-329 3 x 3 x 2 x 2"	LN416-420 4 x 4 x 4 x 2"
LN417-337 3 x 3 x 3 x 1-1/2"	LN417-338 3 x 3 x3x 2"	LN417-329 3 x 3 x 2 x 2"	LN417-420 4 x 4 x 4 x 2"
SANITARY TEE W / R& L SIDE INLET(ALL HUB)
LN418-337 3 x 3 x 3 x 1-1/2 x 1-1/2"	LN418-338 3 x 3 x 3 x 2 x 2"	LN418-420 4"×4"×4"×2"×2"
SANITARY TEE(HUB×HUB×HUB)
LN400-012L 1-1/4"	LN400-012 1-1/4"	LN400-015L 1-1/2"	LN400-015 1-1/2"
LN400-020L 2"	LN400-020 2"	LN400-030 3"	LN400-040L 4"
LN400-040 4"	LN400-060 6"
SEWER & DRAIN ADAPTER (HUBxHUB)
LN117-422 4×3"	LN117-342 3 x 4"
SLIP PLUG (SPG)
LN110S-015 1-1/2"	LN110S-020 2"	LN110S-025 2-1/2"	LN110S-030 3"
LN110S-035 3-1/2"	LN110S-040 4"
STREET SANITARY TEE(SPG×HUB×HUB)
LN403-015 1-1/2"	LN403-020 2"	LN403-030 3"	LN403-040 4"
TEST TEE(HUBxHUBxFIPT)
LN445-015 1 -1/2"	LN445-015L 1 -1/2"	LN445-020 2"	LN445-020L 2"
LN445-030 3"	LN445-030L 3"	LN445-040 4"	LN445-040L 4"
LN445-427 4×3×4"
TEST TEE(HUB×HUB×CLEANOUT W/PLUG)
LN444X-427 4×3×4"	LN444X-015L 4×3×4"	LN444X-015 4×3×4"	LN444X-020L 4×3×4"
LN444X-020 4×3×4"	LN444X-030L 4×3×4"	LN444X-030 4×3×4"	LN444X-040L 4×3×4"
LN444X-040 4×3×4"
THREADED CAP (FIPT)
LN135-015 1-1/2"	LN135-020 2"	LN135-030 3"
TRAP ADAPTER (HUB x SJ)
LN104-012 1-1/4"	LN104-015 1-1/2"	LN104-020 2"	LN104-212 1-1/2" X 1-1/4"
TRAP ADAPTER (SPGXSJ)
LN103-012 1-1/4"	LN103-015 1-1/2"	LN103-020 2"	LN103-212 1-1/2" X 1-1/4"
TRAP ADAPTER W/ PLASTIC NUT & WASHER(HUB×SJ)
LN104X-012 1-1/4"	LN104X-015 1-1/2"	LN104X-020 2"	LN104X-212 1-1/2×1-1/4"
TRAP ADAPTER W/ PLASTIC NUT & WASHER(SPG×SJ)
LN103X-012 1-1/4"	LN103X-015 1-1/2"	LN103X-020 2"	LN103X-212 1-1/2×1-1/4"
TRAP ADAPTER W/CHROME NUT & WASHER (SPG×SJ)
LN103W-015 1-1/2"	LN103W-020 2"	LN103W-212 1-1/2×1-1/4"
TRAP ADAPTER W/CHROME NUT & WASHER(HUB×SJ)
LN104W-020 2"	LN104W-212 1-1/2×1-1/4"
TRAP ADAPTER W/PLASTIC NUT (SPG×SJ)
LN103P-012 1-1/4"	LN103P-015 1-1/2"	LN103P-212 1-1/2×1-1/4"
TRAP ADAPTER W/PLASTIC NUT(HUB×SJ)
LN104P-012 1-1/4"	LN104P-015 1-1/2"	LN104P-212 1-1/2×1-1/4"
TRAY PLUG ADAPTER
LN900-015 1-1/2"
TRAY PLUG ADAPTER - SPIGOT
LN130X-015 1-1/2"
TWO-WAY CLEANOUT(HUB×HUB×HUB)
LN448-030 3"	LN448-040 4"
UNION(HUB×HUB)
LN126-015 1-1/2"	LN126-020 2"	LN126-030 3"	LN126-040 4"
VENT TEE(HUB×HUB×HUB)
LN441-015 1-1/2"	LN441-020 2"	LN441-030 3"	LN441-040 4"
LN441-337 3"×3"×1-1/2"	LN441-338 3"×3"×1-1/2"
# This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [1] Figure numbers may have the following prefix used to identify retail packaging requirements: R [2] XXX - Size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Hydro & Seal UK Corp.
34 Timberline Trail
Aurora, ON L4G 6A5
Canada
647-936-9494
Visit this company's website

Facility : # 1 China

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement+ § [1] [2]

ABS

PW, DWV, SW

Low VOC ABS AB-55 Yellow Heavy Bodied Plastic Pipe Cement

CSA B181.1

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 has been determined based on the testing of pipe and fittings assembled using the
    cement and the P-1030 or P-1050 primer.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

IPEX Inc.
3 Place du Commerce
Verdun, QC H3E 1H7
Canada
514-769-3445

Facility : Barrie, Ontario, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings	ABS	IPE	CSA B181.1
ABS DWV 1/4 BEND, STREET (90°) (SP x H)
1 1/2" 027037	1 1/2" 427037
ABS DWV ADAP BUSH (DFSPG x DWVHU)
4" x 3" 027294	4" x 3" 427294
ABS DWV ADAPTER BUSHING (SP x H)
3" 027311	3" 427311
ABS DWV CLEANOUT ADAP w/PLUG
3" 027708	3" 427708	4" 027709	4" 427709
ABS DWV DOUBLE WYE (H x H x H x H)
1 1/2" 027206	1 1/2" 427206
ABS DWV FEMALE ADAPTER (H x FPT)
2" 027342	2" 427342	3" 027343	3" 427343
ABS DWV FLUSH BUSHING (SPG x FPT)
1 1/2" x 1/2" 027277	1 1/2" x 1/2" 427277	1 1/2" x 1 1/4" 027280	1 1/2" x 1 1/4" 427280
ABS DWV MALE ADAPTER (MPT x H)
2" 027332	2" 427332	3" 027333	3" 427333
4" 027334	4" 427334
ABS DWV REDUCER COUPLNG (H x H)
1 1/4" x 1 1/2" 027360	1 1/4" x 1 1/2" 427360
ABS DWV SANITARY TEE (H x H x H)
1 1/2" 027281	1 1/2" 427281
ABS DWV VENT ELL (90°) (H x H)
1 1/2" 027111	1 1/2" 427111
ABS DWV WYE (H x H x H)
1 1/2" x 1 1/2" x 1 1/4" 027193	1 1/2" x 1 1/2" x 1 1/4" 427193

IPEX Incorporated
3 Place Du Commerce, Suite 101
Île-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : Edmonton, Alberta, Canada

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe¢	ABS	Drain-Way	CSA B181.1
1 1/4" - 6" Sch 40
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark are NSF Certified.

IPEX Incorporated
3 Place Du Commerce, Suite 101
Île-Des-Soeurs
Verdun, QC H3E 1H7
Canada
514-769-2200
Visit this company's website

Facility : # 1 USA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement* ¢	ABS	DWV, SW	IPEX 71 Yellow ABS	CSA B181.1
Solvent Cement* ¢	ABS	DWV, SW	IPEX 71 ABS Cement Medium Bodied Yellow Low VOC	CSA B181.1
! Product is Certified whether or not it bears the U.P. Code Mark. * Cements Certified to CSA B181.1 must be yellow in color. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Cements Certified to CSA B181.2, CSA B137.3 must be gray in color. * Cements Certified to CSA B137.6 must be clear or yellow oxide in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product was evaluated by NSF according to the requirements of NSF/ANSI/CAN 61, Section 4. [2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either the AquaRise Primer or IPEX 70 Purple/Clear Primer. [3] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

IPS Corporation
17109 South Main
P.O. Box 379
Gardena, CA 90248
United States
310-898-3351
Visit this company's website

Facility : # 1 Netherlands

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement¢	ABS	DWV, SW	Weld-On 2771 Yellow ABS	CSA B181.1
Solvent Cement¢	ABS	DWV, SW	Weld-On 771 Yellow Low VOC ABS	CSA B181.1
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effects requirements of NSF/ANSI Standard 61 is evaluated based on pipe and fittings assembled using the cement without a primer. [2] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and any IPS Primer. [3] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings assembled using the cement with primer. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Facility : Gardena, CA

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent¢	ABS	DWV, SW	SCHWARTZ ABS Y5 Yellow Solvent Cement	CSA B181.1
Solvent¢	ABS	DWV, SW	SCHWARTZ Y5 DS Yellow ABS Solvent Cement	CSA B181.1
Solvent Cement* ¢	ABS	DWV, SW	Weld-On 2771 Yellow ABS	CSA B181.1
Solvent Cement* ¢	ABS	DWV, SW	Weld-On 771 Yellow Low-VOC ABS	CSA B181.1
Solvent¢	ABS	DWV, SW	Weld-On 777 Yellow ABS Cement	CSA B181.1
! Product is Certified whether or not it bears the U.P. Code Mark. * Cements Certified to CSA B181.1 must be yellow in color. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. Cements Certified to CSA B181.2, CSA B137.3 must be gray in color. * Cements Certified to CSA B137.6 must be clear or yellow oxide in color. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld-On® P-68 Clear Low-VOC Primer for PVC/CPVC, Weld-On® P-70 Clear Low-VOC CPVC/PVC Primer, or Weld-On® P-70 Purple Low-VOC CPVC/PVC Primer. [4] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Weld-All™ 8151[X] Clear Primer. [5] The compliance of this product with the health effects requirements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings assembled using the cement without a primer. [7] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and P-75 Aqua-Blue Low VOC primer. [8] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld-On P-68 or P-70 Clear or Purple primers. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

IPS Corporation
455 West Victoria Street
Compton, CA 90220
United States
310-898-3300
Visit this company's website

Facility : Hartsville, TN

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement¢	ABS	DWV, SW	Weld-On 2771 Yellow ABS	CSA B181.1
Solvent Cement¢	ABS	DWV, SW	Weld-On 771 Yellow Low-VOC ABS	CSA B181.1
! Product is Certified whether or not it bears the U.P. Code Mark + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [2] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers. [3] This product is intended for use without a primer. [4] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assemblies using the cement and one of the following primers: Christy's® Clear Primer Low VOC, Christy's® Purple Primer Low VOC, Christy's® Red Hot Clear® Low VOC, or Christy's® Red Hot Purple Primer Low VOC. [5] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and either Weld On® P-68 Clear or Purple, P-70® Clear or Purple, or P-72 Clear Primers. [6] The compliance of this product with the health effects requriements of NSF/ANSI/CAN 61 is evaluated based on pipe and fittings. [7] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 was determined based on the testing of pipe and fittings assembled using the cement and Weld-On P-70 Clear or Purple primers. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

J-M Manufacturing Co., Inc. DBA JM Eagle
9 Peach Tree Hill Road
Livingston, NJ 07039
United States
310-693-8200
Visit this company's website

Facility : # 14 Stockton, CA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe# ¢	ABS	J-M Manufacturing	CSA B181.1
1-1/2" - 6"
# This product may be marked with an alternate trade name: J-M Manufacturing and/or PW Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo]. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

NOTE: Only products bearing the NSF Mark are Certified.

LaSalle Bristol Manufacturing, Plymouth Div., formerly known as BPC Mfg.
1755 North Oak Road
Plymouth, IN 46563
United States
574-936-9894

Facility : Plymouth, IN

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢	ABS		CSA B181.1
1/16 Bend (H x H)
1 1/4"	1 1/2"	2"	3"
1/16 Bend Street
1 1/2"	3"
1/4 Bend (H x FPT)
3" x 3"
1/4 Bend (H x H)
1 1/4"	1 1/2"	2"	3"
1/4 Bend Street (SPG x FPT)
3"	2453-1
1/4 Bend Street (SPG x H)
1 1/4"	1 1/2"	2"	3"
1/4" Bend with Low Heel Inlet (H x H x H)
3" x 3" x 1 1/2"	3" x 3" x 2"
1/4" Bend with Side Inlet (H x H x H)
3" x 3" x 1 1/2"	3" x 3" x 2"
1/8 Bend (H x H)
1 1/4"	1 1/2"	2"	3"
1/8 Bend Street (SPG x H)
1 1/4"	1 1/2"	2"	3"
C.O. Adapter (SPG x FPT)
1 1/4"	1 1/2"	2"	3"
Cleanout Plug (MPT)
1 1/4"	1 1/2"	2"	3"
Cleanout Tee (H x H x FPT)
1 1/2"	2"
Closet Bend
4" x 3" (633103)
Closet Flange
4" x 3" HUB	4" x 3" Spigot
Closet Flange With Adjustable Rings
4" x 3" HUB	4" x 3" SPG
Coupling (H x H)
1 1/4"	1 1/2"	2"	3"
Double Sanitary Tee (FPT x FPT x H x H)
3" x 3" x 2" x 1 1/2"	3" x 3" x 2" x 2"	3" x 3" x 1½" x 1½"
Double Sanitary Tee (H x FPT x H x H)
3" x 3" x 2" x 1 1/2"	3" x 3" x 2" x 2"
Double Sanitary Tee (H x H x H x H)
3" x 3" x 2" x 1 1/2"	3" x 3" x 2" x 2"	3" x 3" x 1½" x 1½"
Double Whe (H x H x H x H)
1 1/2"	3"
Female Adapter (H x FPT)
1 1/2"	2"	3"
Female Strainer Adapter (H x FPT)
1 1/2"
Flange
3634-3	3634-4	3634-5	3634-6
Flush Bushing (SPG x H)
1 1/2" x 1 1/4"	2" x 1 1/2"	3" x 2"	3" x 1 1/2"
Locknut
1 1/2"
Long Sweep 1/4 Bend
3"
Long Sweep 1/4 Bend (H x H)
1 1/2"	2"
Long Sweep 1/4 Bend Street
1 1/2" (5276)	2" (5277)
Long Sweep 1/4 Bend Street
3"
Long-Turn Tee Wye, Single (H x H x H)
1 1/2"	2"	3"	2" x 1 1/2" x 1 1/2"
2" x 1 1/2" x 2"	2" x 2" x 1 1/2"	3" x 3" x 1 1/2"	3" x 3" x 2"
Male Adapter (H x MPT)
1 1/4"	1 1/2"	2"	3"
Male Strainer Adapter (SPG x FPT)
1 1/2"
Male Trap Adapter with Washers and Nut (SPG x SJT)
1 1/2" x 1 1/4" (2801A2)
Nipple (Threaded Both Ends) MPT
3" x 2 5/8"	3" x 3"	3" x 4"	3" x 5"
3" x 6"	3" x 7"	3" x 8"	3" x 9"
3" x 10"	3" x 11"	3" x 12"
Nipple (Threaded One End) MPT
3" x 3"	3" x 4"	3" x 5"	3" x 6"
3" x 7"	3" x 8"	3" x 9"	3" x 10"
3" x 11"	3" x 12"
P Trap Adapter with Washer and Nut (SPG x FPT)
1 1/2"	1 1/2" x 1 1/4"
P Trap La Pattern Union (H x SJT)
1 1/4"	1 1/2"	1 1/4" x 1 1/2"
P Trap with Union (H x H)
1 1/4"	1 1/2"
Pipe Increaser - Reducer (H x H)
1 1/2" x 2"	1 1/2" x 3"	2" x 3"
Plug (Spigot) spg
1 1/2"	2"
Sanitary Tee (FPT x FPT x H)
3" x 3" x 2"
Sanitary Tee (FPT x H x H)
3" x 3" x 2"
Sanitary Tee (H x FPT x H)
1½" x 1½" x 1½"	3" x 3" x 3"	3" x 3" x 2"
Sanitary Tee (H x H x H)
1 1/4"	1 1/2"	1½" x 1¼" x 1¼"	1½" x 1¼" x 1½"
1½" x 1½" x 1¼"	2"	2" x 1½" x 1½"	2" x 1½" x 2"
2" x 2" x 1½"	3"	3" x 3" x 1½"	3" x 3" x 2"
Sanitary Tee Street (SPG x H x H)
2" x 2" x 1½"
Sanitary Tee with Left-Side Inlet (H x H x H x H)
3" x 3" x 2" 1 1/2"	3" x 3" x 2" x 2"
Sanitary Tee with Right-Side Inlet (H x H x H x H)
3" x 3" x 2" x 1 1/2"	3" x 3" x 2" x 2"
Side-Vent 1/4 Bend (H x MPT)
1 1/2"
Side-Vent Baffle Tee (H x H x H)
1 1/2"
Slip Cap (H)
1 1/2"	2"
Spig. Extended x FPT C.O. Adapter Fitting
1 1/2"
Swivel Strainer Adapter (EXT.SPG X FPT)
1 1/2" (2 1/2" long)	1 1/2" (2 3/4" Long)
Swivel Strainer Adapter (H xFPT)
1 1/2"	1 1/4" x 1 1/2"
Swivel Strainer Adapter (SPG x FPT)
1 1/4" x 1 1/2"	1 1/2"
Thread Closet Flange
4" x 3" MPT	1 3/4" long	2 1/4" long	4" x 3" FPT
1 3/4" long	2 1/4" long
Threaded Cap (FPT)
1 1/2"
Three Way EII
3" H x H x H (2263)	3" x 3" x 2" (4327)	3" x 3" x 3" (4303)
Trap Adapter, Female Less Washer and Nut (H x SJT)
1 1/4"	1 1/2"	1 1/2" x 1 1/4"	2"
Trap Adapter, Female with Washer and Nut (H x SJT)
1 1/4"	1 1/2"	1 1/2" x 1 1/4"
Trap Adapter, Male Less Washer and Nut (SPG x SJT)
1 1/4"	1 1/2"	2"	3"
Trap Adapter, Male with Washer and Nut (SPG x SJT)
1 1/4"	1 1/2"
Vent Ell (H x FPT)
3" x 3"
Vent Ell (H x H)
1 1/4"	1 1/2"	2"	3"
Vent Tee (H x H x H)
1 1/4"	1 1/2"	2"
Wye (H x H x FPT)
1 1/2" (2301-3)
Wye (H x H x H)
1 1/2"	2"	2" x 1 1/2" x 1 1/2"	2" x 1 1/2" x 2"
2" x 2" x 1 1/2"	3"	3" x 3" x 1 1/2"	3" x 3" x 2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Fittings	ABS		CSA B181.1
3" x 3" Swivel Elbow x 3" Bayonet (p/n DVB)	3" x 3" Swivel Elbow x 3" Hub (p/n DVH)	3" x 3" Swivel Elbow x 3" Spigot (p/n DVS)	1 1/2" H x 3" Spigot Offset Bushing (p/n V153)
2" Hub x Bayonet (p/n V293B3)	2" Hub x 3" Spigot Offset Bushing (p/n V23)	3" FPB X Flange Adapter (p/n V13T)	3" Hub X 3" Swivel Elbow (p/n V93BH)
3" Spigot X 3" Swivel Elbow (p/n V93BS)	3" Straight Flex Hose Adapter (p/n V293H3B)	3" Spigot x 3" Bayonet (p/n V293B3S)	3" x 3" Swivel Elbow (p/n V93B)
3" x 3" x 1 1/2" Hub Bayonet Elbow (p/n V93B1)	3" x 3" x 1 1/2" Swivel Elbow (p/n V93B15)	3" Bay x 3" x 1 1/2" Swivel Elbow (p/n V93BS15)	3" x 3" x 1 1/2" Swivel Flange (p/n V23S1)
3" x 3" x 1 1/2" Swivel Elbow (p/n V93S15)	3" x 3" x 2" Hub Elbow (p/n V93B2)	3" Spig. x Bayonet x 12" (p/n V293B3SP)
Flex Hose Adapter (p/n V93H3B)
1 1/2" MPT Flange Adapter (p/n V1515MT)
Hub Adapter (p/n V13)
1 1/2" Hub Adapter (p/n V1515)	1 1/2" Spig Adapter (p/n V1515S)	2" Hub Adapter (p/n V22)	2" Spigot Adapter (p/n V22S)
3" Bay x Flange (p/n V13B)	3" MPT x Flange (p/n V13MT)	3" Spigot Adapter (p/n V13S)	3" x 3" x 1 1/2" Hub Bayonet WYE (p/n V33B2R)
3" x 3" x 1 1/2" Swivel Flange (p/n V23B1)	3" x 3" x 2" Swivel Flange (p/n V23B2)

Lesso America, Inc.
1010 Railroad Street
Corona, CA 92882
United States
888-988-8839
951-547-6888

Facility : Corona, CA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢ [1]	ABS	Lesso	CSA B181.1
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")	LN324-020 (2")	LN324-030 (3")	LN324-040 (4")
LN324-060 (6")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")	LN326-020 (2")	LN326-030 (3")	LN326-040 (4")
45° Double Wye (All HUB)
LN611-015 (1 1/2")	LN611-020 (2")	LN611-030 (3")	LN611-030L (3")
LN611-040 (4")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")	LN321-015 (1 1/2")	LN321-020L (2")	LN321-030L (3")
LN321-040 (4")	LN321-060 (6")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")	LN321-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")	LN321-020S (2")	LN321-030S (3")	LN321-040S (4")
45° Reducing Double Wye (All HUB)
LN612-251 (2" x 2" x 1 1/2" x 1 1/2")	LN612-337 (3" x 3" x 1 1/2" x 1 1/2")	LN612-338 (3" x 3" x 2" x 2")	LN612-420 (4" x 4" x 2" x 2")
LN612-422 (4" x 4" x 3" x 3")	LN612-532 (6" x 6" x 4" x 4")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")	LN603-337 (3" x 3" x 1 1/2")	LN603-338 (3" x 3" x 2")	LN603-420 (4" x 4" x 2")
LN603-422 (4" x 4" x 3")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")	LN601-337L (3" x 3" x 1 1/2")	LN601-338L (3" x 3" x 2")	LN601-419 (4" x 4" x 1 1/2")
LN601-420L (4" x 4" x 2")	LN601-422L (4" x 4" x 3")	LN601-530 (6" x 6" x 3")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")	LN323-015 (1 1/2")	LN323-020L (2")	LN323-030L (3")
LN323-040 (4")	LN323-060 (6")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")	LN323-030 (3")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")	LN323-020S (2")	LN323-030S (3")	LN323-040S (4")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")	LN602-020 (2")	LN602-030 (3")	LN602-040 (4")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")	LN600-015 (1 1/2")	LN600-015L (1 1/2")	LN600-020 (2")
LN600-020L (2")	LN600-030 (3")	LN600-030L (3")	LN600-040 (4")
LN600-040L (4")	LN600-060 (6")	LN601-241 (2" x 1 1/2" x 1 1/2")	LN601-251 (2" x 2" x 1 1/2")
LN601-337 (3" x 3" x 1 1/2")	LN601-338 (3" x 3" x 2")	LN601-420 (4"x 4" x 2")	LN601-422 (4" x 4" x 3")
LN601-532 (6" x 6" x 4")
60° Elbow (HUB x HUB)
LN319-015 (1 1/2")	LN319-020 (2")	LN319-030 (3")	LN319-040 (4")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")	LN320-020 (2")	LN320-030 (3")	LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")	LN327-020 (2")	LN327-030 (3")	LN327-040 (4")
LN327-241 (2" x 1 1/2" x 1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")	LN300-015 (1 1/2")	LN300-020 (2")	LN300-030 (3")
LN300-040 (4")	LN300-060 (6")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")	LN303-338 (3" x 3" x 2")	LN303-420 (4" x 4" x 2")
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")	LN300S-338 (3" x 3" x 2")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")	LN300-015S (1 1/2")	LN300-020S (2")	LN300-030S (3")
LN300-040S (4")	LN300-060S (6")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")	LN304-015 (1 1/2")	LN304-020 (2")	LN304-030 (3")
LN304-040 (4")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Reducing Closet St. Elbow w/ Test Cap(HUBxSpg)
LN330X-342 (3" x 4")	LN330X-422 (4" x 3")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")	LN330-422 (4" x 3")
90° Street Elbow (HUB x Spg)
LN302-012 (1 1/4")	LN302-015 (1 1/2")	LN302-020 (2")	LN302-030 (3")
LN302-040 (4")	LN302-060 (6")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")	LN302-020S (2")	LN302-030S (3")	LN302-040S (4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")	LN331-015 (1 1/2")	LN331-020 (2")	LN331-030 (3")
LN331-040 (4")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")	LN120-212 (1 1/2" x 1 1/4")
Adapter Bushing (DWV Spg x S&D HUB)
LN118-030 (3")	LN118-040 (4")
Cap (FIPT)
LN116F-015 (1 1/2")
Cap (HUB)
LN116-012 (1 1/4")	LN116-015 (1 1/2")	LN116-020 (2")	LN116-030 (3")
LN116-040 (4")	LN116-060 (6")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spg x HUB)
LN124-020 (2")	LN124-040 (4")	LN124-422 (4" x 3")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")	LN105-015 (1 1/2")	LN105-020 (2")	LN105-030 (3")
LN105-040 (4")	LN105-060 (6")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")	LN105X-015 (1 1/2")	LN105X-020 (2")	LN105X-030 (3")
LN105X-040 (4")	LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")	LN106-015 (1 1/2")	LN106-020 (2")	LN106-025 (2 1/2")
LN106-030 (3")	LN106-035 (3 1/2")	LN106-040 (4")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-015 (1 1/2")	LN501-020 (2")	LN501-030 (3")	LN501-040 (4")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")	LN106C-020 (2")	LN106C-030 (3")	LN106C-040 (4")
Coupling (HUB x HUB)
LN100-012 (1 1/4")	LN100-015 (1 1/2")	LN100-020 (2")	LN100-030 (3")
LN100-040 (4")	LN100-060 (6")
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")	LN601-210 (1-1/2" × 1-1/2" × 3/4")
Double Fixture Fitting (All HUB)
LN500-020 (2")	LN500-030 (3")	LN500-241 (2" x 1 1/2" x 1 1/2" x 1-1/2")	LN500-251 (2" x 2" x 1 1/2"x 1 1/2")
LN500-257 (2" x 1 1/2" x 2" x 2")	LN500-338 (3" x 2" x 3" x 3")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")	LN428-020 (2")	LN428-030 (3")	LN428-040 (4")
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Double Sanitary Tee w/ R & L Side Inlet (All HUB)
LN439-338 (3" x 3" x 3" x "3 x 2" x 2")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-337 (3" x 3" x 3" x 3" x1 1/ 2")	LN438-338 (3" x 3" x 3" x 3" x 2")	LN438-420 (4" x 4" x 4" x 4" x 2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")	LN101-015 (1 1/2")	LN101-020 (2")	LN101-030 (3")
LN101-040 (4")	LN101-060 (6")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")	LN108-210 (1 1/2" x 3/4")	LN108-212 (1 1/2" x 1 1/4")	LN108-251 (2" x 1 1/2")
LN108-337 (3" x 1 1/2")	LN108-338 (3" x 2")	LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")	LN107-251 (2" x 1 1/2")	LN107-337 (3" x 1 1/2")	LN107-338 (3" x 2")
LN107-419 (4" x 1 1/2")	LN107-420 (4" x 2")	LN107-422 (4" x 3")	LN107-532 (6" x 4")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")	LN123-030 (3")	LN123-040 (4")
Hub Adapter Cast Iron Increaser (HUBx SJ)
LN123R-213 (1 1/2" x 2")	LN123R-342 (3" x 4")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")	LN711M-212 (1 1/2" x 1 1/4")
Male Adapter (HUB x MIPT)
LN109-012 (1 1/4")	LN109-015 (1 1/2")	LN109-020 (2")	LN109-030 (3")
LN109-040 (4")	LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")	LN111-015 (1 1/2")	LN111-015 (1 1/2")	LN111-020 (2")
LN111-030 (3")	LN111-040 (4")	LN111-212 (1 1/2" x 1 1/4")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")	LN119-030 (3")	LN119-040 (4")	LN119-251 (2" x 1 1/2")
LN119-422 (4" x 3")
P-Trap (Hub x Hub x Cleanout)
LN707X-015 (1 1/2")	LN707X-020 (2")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")	LN706X-020 (2")	LN706X-030 (3")	LN706X-040 (4")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")	LN708P-015 (1 1/2")	LN708P-020 (2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")	LN102-251 (2" x 1 1/2")	LN102-337 (3" x 1-1/2")	LN102-338 (3" x 2")
LN102-419 (4" x 1 1/2")	LN102-420L (4" x 2")	LN102-422L (4" x 3")
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")	LN106R-015 (1 1/2")	LN106R-020 (2")	LN106R-025 (2 1/2")
LN106R-030 (3")	LN106R-035 (2 1/2")	LN106R-040 (4")	LN106R-060 (6")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")	LN502-251 (2" x 2" x 1 1/2")	LN502-257 (2" x 1 1/2" x 2")	LN502-337 (3" x 3" x 1 1/2")
LN502-338 (3" x 3" x 2")	LN502-420 (4" x 4" x 2")	LN502-422 (4" x 4" x 3")
Reducing Coupling (HUB x HUB)
LN102-420 (4" x 2")	LN102-422 (4" x 3")
Reducing Double Sanitary Tee (All HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")	LN429-323 (3" x 3" x 2" x 1 1/2")	LN429-337 (3" x 3" x 1 1/2" x 1 1/2")	LN429-338 (3" x 3" x 2" x 2")
LN429-420 (4" x 4" x 2" x 2")	LN429-422 (4" x 4" x 3" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")	LN401-222 (1 1/2" x 1 1/4" x 1 1/4")	LN401-225 (11/2" x 1 1/4" x 1 1/2")	LN401-241L (2" x 1 1/2" x 1 1/2")
LN401-251L (2" x 2" x 1 1/2")	LN401-257L (2" x 1 1/2" x 2")	LN401-337 (3" x 3" x 1 1/2")	LN401-338L (3" x 3" x 2")
LN401-419 (4" x 4" x 1 1/2")	LN401-420 (4" x 4" x 2")	LN401-422 (4" x 4" x 3")	LN401-532 (6" x 6" x 4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-251 (2" x 2" x 1 1/2")	LN404-257 (2" x 1 1/2" x 2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-337 (3" x 3" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-338 (3" x 3" x 2")
Reducing Vent Tee (HUB x HUB x HUB)
LN441-337 (3" x 3" x 1 1/2")	LN441-338 (3" x 3" x 2")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")	LN130-020 (2")	LN130-030 (3")	LN130-040 (4")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")	LN400-012L (1 1/4")	LN400-015 (1 1/2")	LN400-015L (1 1/2")
LN400-020 (2")	LN400-020L (2")	LN400-030 (3")	LN400-040 (4")
LN400-040L (4")	LN400-060 (6")	LN401-241 (2" x 1 1/2" x 1 1/2")	LN401-251 (2" x 2" x 1 1/2")
LN401-257 (2" x 1 1/2" x 2")	LN401-338 (3" x 3" x 2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-329 (3" x 3" x 2" x 2")	LN416-337 (3" x 3" x 3" x 1 1/2")	LN416-338 (3" x 3" x 3" x 2")	LN416-420 (4" x 4" x 4" x 2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-329 (3" x 3" x 2" x 2")	LN417-337 (3" x 3" x 3" x 1 1/2")	LN417-338 (3" x 3" x 3" x 2")	LN417-420 (4" x 4" x 4" x 2")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")	LN418-338 (3" x 3" x 3" x 2" x 2")	LN418-420 (4" x 4" x 4" x 2" x 2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")	LN117S-422 (4" x 3")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Slip Plug (Spg)
LN110S-015 (1 1/2")	LN110S-020 (2")	LN110S-025 (2 1/2")	LN110S-030 (3")
LN110S-035 (3 1/2")	LN110S-040 (4")
Snap-In Cleanout w/ Plug
LN106W-030 (3")	LN106W-040 (4")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")	LN403-020 (2")	LN403-030 (3")	LN403-040 (4")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")	LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")	LN444X-020L (2")	LN444X-030L (3")	LN444X-040L (4")
LN444X-427 (4"x 3" x 4")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")	LN444X-020 (2")	LN444X-030 (3")	LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")	LN445-015L (1 1/2")	LN445-020 (2")	LN445-020L (2")
LN445-030 (3")	LN445-030L (3")	LN445-040 (4")	LN445-040L (4")
LN445-427 (4" x 3" x 4")
Threaded Cap (FIPT)
LN135-015 (1 1/2")	LN135-020 (2")	LN135-030 (3")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")	LN103X-015 (1 1/2")	LN103X-020 (2")	LN103X-212 (1 1/2" x 1-1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")	LN104C-212 (1 1/2" x 1 1/4")	LN104W-020 (2")	LN104W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103C-020 (2")	LN103C-212 (1 1/2 x 1 1/4")	LN103W-015 (1 1/2")	LN103W-020 (2")
LN103W-212 (1 1/2 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-012 (1 1/4")	LN104X-015 (1 1/2")	LN104X-020 (2")	LN104X-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-012 (1 1/4")	LN104P-015 (1 1/2")	LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")	LN103P-015 (1 1/2")	LN103P-212 (1 1/2" x 1 1/4")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Tray Plug Adapter (Spigot x Female NPSM)
LN113-015 (1 1/2")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")	LN900-015 (1 1/2")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-030 (3")	LN448-040 (4")
Union (HUB x HUB)
LN126-015 (1 1/2")	LN126-020 (2")	LN126-030 (3")	LN126-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")	LN441-020 (2")	LN441-030 (3")	LN441-040 (4")
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.

Lotte Chemical Corporation
Gosan-ro 56, Uiwang-si
Gyeonggi-do 16073
Republic of Korea
82 31 596 3568
Visit this company's website

Facility : Jellanam-do, Republic of Korea

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type	End Use	Trade Name	Product Standard
ABS¢	1, 8	Starex SP-0170 KXXXX[1]	CSA B181.1
ABS¢	1, 8	Starex SP-0170 K2314	CSA B181.1
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] X may be 1 ~ 9. [2] C refers to Cream, K refers to Black, and W refers to White.

NIBCO INC.
World Headquarters
1516 Middlebury Street
Elkhart, IN 46516-4740
United States
574-295-3000
Visit this company's website

Facility : Greensboro, GA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# ¢	ABS	NIBCO	CSA B181.1
22 1/2° Ells§
5808	5808-2
45° Ells§
5806	5806-2	5806-2-SR	5806-SR
60° Ell§
5860	5860-2
90° Ells§
5807	5807-2	5807-2-SR	5807-2CL
5807-2LT	5807-9	5807-CL	5807-LT
5807-SR	5861	5861-LH
Adapters§
5803	5803-2	5803-2-CS	5804
5816-CS
Caps§
5817	5826	5827
Closet Flanges§
5851	5851-2	5851-2A	5851-3
5851-4	5851-A	5855
Coupling§
5801
Double 90° Ell
5837
Fitting Adapter§
5804-2
Flush Adapter
5803-2-F 1 1/2" x 1 1/4" - 4" x 3"
Flush Bushing§
5801-2-F
Nipple§
5829	5829-2
No Hub Soil Pipe Adapter
5805-N
P-Traps
5880	5884	5884-CS	5885§
5892§	5892-3-C	5892-B	5892-C
5893§	5894-CS	5895§	5895-3§
Plug
5818-CS
Return Bends§
5878	5879
Sewer and Drain Adapter§
5800-SD
Soil Pipe Adapter§
5800	5805
Swivel Adapters§
5803-2-SW	5803-2-SW-EL
Tees§
5811	5811-14V-CS	5811-18	5811-2
5811-C	5812-LR	5814-CS	5835
5835-9	5835-9-9	5835-B	5836
5870	5871	5872
Trap Adapters
5801-2-7	5801-2-7-B	5801-7	5801-7-B
5801-7-C	5803-2-7C
Tray Plug Adapter§
5803-2 TPA 1 1/2"
Wyes§
5810	5810-14	5810-2	5810-CS
5834
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. # Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Facility : Goshen, IN

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings#	ABS	NIBCO	CSA B181.1
22 1/2° Ells§
5808	5808-2
45° Ells§
5806	5806-2	5806-2-SR	5806-SR
60° Ell§
5860	5860-2
90° Ells§
5807	5807-2	5807-2-SR	5807-2CL
5807-2LT	5807-9	5807-CL	5807-LT
5807-SR	5861	5861-LH
Adapters§
5803	5803-2	5803-2-CS	5804
5816-CS
Caps§
5817	5826	5827
Closet Flanges§
5851	5851-2	5851-2A	5851-3
5851-4	5851-A	5855
Coupling§
5801
Double 90° Ell
5837
Fitting Adapter§
5804-2
Flush Adapter §
5803-2-F 1 1/2" x 1 1/4" - 4" x 3"§
Flush Bushing§
5801-2-F
Nipple§
5829	5829-2
No Hub Soil Pipe Adapter
5805-N
P-Traps
5880	5884	5884-CS	5885§
5892§	5892-3-C	5892-B	5892-C
5893§	5894-CS	5895§	5895-3§
Plug
5818-CS
Return Bends§
5878	5879
Sewer and Drain Adapter§
5800-SD
Soil Pipe Adapter§
5800	5805
Swivel Adapters§
5803-2-SW	5803-2-SW-EL
Tees§
5811	5811-14V-CS	5811-18	5811-2
5811-C	5812-LR	5814-CS	5835
5835-9	5835-9-9	5835-B	5836
5870	5871	5872
Trap Adapters
5801-2-7	5801-2-7-B	5801-7	5801-7-B
5801-7-C	5803-2-7C
Tray Plug Adapter§
5803-2 TPA 1 1/2"	5803-2 TPA-SE 1 1/2"
Wyes§
5810	5810-14	5810-2	5810-CS
5834
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. # Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: UCP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC.

Oatey Company
20600 Emerald Parkway
Cleveland, OH 44135
United States
800-203-1155
216-267-7100
Visit this company's website

Facility : # 1 Cleveland, OH

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement% ¢	ABS	DWV, SW	Masters ABS Pro X Yellow Cement	CSA B181.1
Solvent Cement% ¢	ABS	DWV, SW	Masters ABS Pro Yellow Cement	CSA B181.1
Solvent Cement%	ABS/PVC	DWV, SW	Masters Transition-Pro Medium White PVC to ABS Transition Cement	CSA B181.1
Solvent Cement% ¢	ABS	DWV, SW	Oatey ABS Cement Premium Grade Yellow	CSA B181.1
Solvent Cement%	PVC/ABS	DWV, SW	Oatey PVC to ABS Medium White Transition Cement	CSA B181.1
% Only products bearing the NSF Mark are Certified. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Oatey Clear and Purple Primers. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con Indicador UV Mediano. Todo clima Cemento de 1 Paso para CPVC

Facility : Omaha, NE

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement%	ABS	DWV, SW	Hercules Black ABS Medium Body Fast Set Cement	CSA B181.1
Solvent Cement% ¢	ABS	DWV, SW	Masters ABS Pro X Yellow Cement	CSA B181.1
Solvent Cement% ¢	ABS	DWV, SW	Masters ABS Pro Yellow Cement	CSA B181.1
Solvent Cement%	ABS/PVC	DWV, SW	Masters Transition-Pro Medium White PVC to ABS Transition Cement	CSA B181.1
Solvent Cement% ¢	ABS	DWV, SW	Oatey ABS Cement Premium Grade Yellow Cement	CSA B181.1
Solvent Cement% ¢	ABS	DWV, SW	Oatey ABS Cement Standard Grade Yellow Cement	CSA B181.1
Solvent Cement%	PVC/ABS	DWV, SW	Oatey PVC to ABS Medium White Transition Cement	CSA B181.1
% Only products bearing the NSF Mark are Certified. + Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI/CAN 61 was determined based on the testing of pipe and fittings assembled using the cement and Oatey Purple Primer. [2] The product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] Product intended for use without a primer. [4] NSF-Certified Oatey Clear or Purple primer is required. [5] Full trade designation of this cement is: Oatey Flowguard Cemento Blanco De 1 Paso Con Indicador UV Mediano. Todo clima Cemento de 1 Paso para CPVC

++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).

PT LESSO TECHNOLOGY INDONESIA
Jalan Semarang Demak
KM 14,7 BLOK D RT.001, RW.001
Desa/Kelurahan Batu, Kec., Karangtengah
Kab. Demak, Provinsi Jawa Tengah, 59561
Indonesia
62 24 764 42724

Facility : Jawa Tengah, Indonesia

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# ¢ § [2] [3] [G]	ABS	Lesso	CSA B181.1
22½° ELBOW (HUB×HUB)
LN324-015 1-1/2"	LN324-020 2"	LN324-030 3"	LN324-040 4"
LN324-060 6"
22½° STREET ELBOW (HUB×SPG)
LN326-015 1-1/2"	LN326-020 2"	LN326-030 3"	LN326-040 4"
45° DOUBLE WYE (ALL HUB)
LN611-015 1-1/2"	LN611-020 2"	LN611-030L 3"	LN611-030 3"
LN611-040 4"
45° ELBOW (HUB×HUB)
LN321-012 1-1/4"	LN321-015 1-1/2"	LN321-020L 2"	LN321-030L 3"
LN321-040 4"	LN321-060 6"
45° ELBOW-SHORT TURN (HUB×HUB)
LN321-015S 1-1/2"	LN321-020S 2"	LN321-030S 3"	LN321-040S 4"
45° REDUCING DOUBLE WYE (ALL HUB)
LN612-251 2 x 2 x 1-1/2 x 1-1/2"	LN612-337 3 x 3 x 1-1/2 x 1-1/2"	LN612-338 3×3×2×2"	LN612-420 4 x 4 x 2 x 2"
LN612-422 4 x 4 x 3 x 3"	LN612-532 6 x 6 x 4 x 4"
45° REDUCING STREET WYE(SPG×HUB×HUB)
LN603-251 2 x 2 x 1-1/2"	LN603-337 3 x 3 x 1-1/2"	LN603-338 3 x 3 x 2"	LN603-420 4 x 4 x 2"
LN603-422 4 x 4 x 3"
45° REDUCING WYE (HUB×HUB×HUB)
LN601-241 2×1-1/2×1-1/2"	LN601-251L 2×2×1-1/2"	LN601-251 2×1-1/2×1-1/2"	LN601-337L 3×3×1-1/2"
LN601-337 2×1-1/2×1-1/2"	LN601-338L 3×3×2"	LN601-338 2×1-1/2×1-1/2"	LN601-419 4 x 4 x 1-1/2"
LN601-420L 4×4×2"	LN601-420 2×1-1/2×1-1/2"	LN601-422L 4×4×3"	LN601-422 2×1-1/2×1-1/2"
LN601-530 6 x 6 x 3"	LN601-532 6×6×4"
45° STREET ELBOW (HUB×SPG)
LN323-012 1-1/4"	LN323-015 1-1/2"	LN323-020L 2"	LN323-030L 3"
LN323-040 4"	LN323-060 6"
45° STREET ELBOW-SHORT TURN (HUB×SPG)
LN323-015S 1-1/2"	LN323-020S 2"	LN323-030S 3"	LN323-040S 4"
45° STREET WYE (SPG×HUB×HUB)
LN602-015 1 1/2"	LN602-020 2"	LN602-030 3"	LN602-040 4"
45° WYE (HUB×HUB×HUB)
LN600-012 1-1/4"	LN600-015L 1-1/2"	LN600-015 1-1/2"	LN600-020L 2"
LN600-020 2"	LN600-030L 3"	LN600-030 3"	LN600-040L 4"
LN600-040 4"	LN600-060 6"	LN601-209 1-1/2×1-1/2"×1/2"	LN601-210 1-1/2×1-1/2"×3/4"
60° ELBOW (HUB×HUB)
LN319-015 1-1/2"	LN319-020 2"	LN319-030 3"	LN319-040 4"
60° STREET ELBOW (HUB×SPG)
LN320-015 1-1/2"	LN320-020 2"	LN320-030 3"	LN320-040 4"
90° ELBOW (HUB×HUB)
LN300-012 1-1/4"	LN300-015 1-1/2"	LN300-020 2"	LN300-030 3"
LN300-040 4"	LN300-060 6"
90° ELBOW W/ LOW HEEL INLET (HUB×HUB×HUB)
LN303-337 3 x 3 x 1-1/2"	LN303-338 3 x 3 x 2"	LN303-420 4 x 4 x 2"
90° ELBOW WITH SIDE INLET (HUB×HUB×HUB)
LN300S-337 3 x 3 x 1-1/2"	LN300S-338 3 x 3 x 2"
90° ELBOW-SHORT TURN (HUB×HUB)
LN300-012S 1-1/4"	LN300-015S 1-1/2"	LN300-020S 2"	LN300-030S 3"
LN300-040S 4"	LN300-060S 6"
90° LONG SWEEP ELBOW (HUB×HUB)
LN304-012 1-1/4"	LN304-015 1-1/2"	LN304-020 2"	LN304-030 3"
LN304-040 4"
90° LONG SWEEP ELBOW, STREET (HUB×SPG)
LN309-015 1-1/2"	LN309-020 2"	LN309-030 3"	LN309-040 4"
90° REDUCING CLOSET ELBOW (HUB×HUB)
LN329-422 4×3"
90° REDUCING CLOSET ST ELBOW W/ TEST CAP (HUB×SPG)
LN330X-342 3 x 4"	LN330X-422 4 x 3"
90° REDUCING CLOSET STREET ELBOW (HUB×SPG)
LN330-342 3 x 4"	LN330-422 4 x 3"
90° STREET ELBOW (HUB×SPG)
LN302-012 1-1/4"	LN302-015 1-1/2"	LN302-020 2"	LN302-030 3"
LN302-040 4"	LN302-060 6"
90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
LN310-338 3 x 3 x 2"
90° STREET ELBOW-SHORT TURN (HUB×SPG)
LN302-015S 1-1/2"	LN302-020S 2"	LN302-030S 3"	LN302-040S 4"
90° VENT ELBOW (HUB×HUB)
LN331-012 1-1/4"	LN331-015 1-1/2"	LN331-020 2"	LN331-030 3"
LN331-040 4"
ABS-COPPER ADAPTER (HUB×SJ)
LN120-015 1-1/2"	LN120-212 1-1/2×1-1/4"
CAP (HUB)
LN116-012 1-1/4"	LN116-015 1-1/2"	LN116-020 2"	LN116-030 3"
LN116-040 4"	LN116-060 6"
CLEANOUT ADAPTER (SPG×FIPT)
LN105-012 1-1/4"	LN105-015 1-1/2"	LN105-020 2"	LN105-030 3"
LN105-040 4"	LN105-060 6"
CLEANOUT ADAPTER W/PLUG (SPG×CLEANOUT W/PLUG)
LN105X-012 1-1/4"	LN105X-015 1-1/2"	LN105X-020 2"	LN105X-030 3"
LN105X-040 4"	LN105X-060 6"
CLEANOUT PLUG (MIPT)
LN106-015 1-1/2"	LN106-020 2"	LN106-025 2-1/2"	LN106-030 3"
LN106-035 3-1/2"	LN106-040 4"
CLEANOUT WYE (HUB×HUB×FIPT)
LN604-015 1-1/2"
CLOSET FLANGE W/ADJUSTABLE METAL RING (H)
LN811-040 4"
CLOSET FLANGE W/ADJUSTABLE METAL RING (S)
LN811-040 4"×4"
CLOSET FLANGE (FIPT)
LN830-422 4 x 3
CLOSET FLANGE (HUB)
LN800-040 4×4"	LN800-422L 4×3"	LN800-422 4×3"
CLOSET FLANGE (MIPT)
LN831-422 4 x 3"
CLOSET FLANGE W/ KNOCKOUT TEST PLUG (HUB)
LN800T-040 4 x 4"	LN800T-422L 4 x 3"	LN800T-422 4 x 3"
CLOSET FLANGE W/ PIPE STOP (HUB)
LN815PS-040 4 x 4 / 4 x 3
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING (HUB)
LN810P-040 4 x 4"
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING (SPG)
LN812P-040 4 x 4"	LN812P-422 4 x 3"
CLOSET FLANGE W/KONCKOUT & PIPE STOP (HUB)
LN815K-040 4 x 4 / 4 x 3
CLOSET FLANGE W/RING-PULL TEST PLUG (HUB)
LN800R-040 4 x 4"	LN800R-422L 4 x 3"	LN800R-422 4 x 3"
CLOSET FLANGE W/THREADED TEST PLUG (HUB)
LN800T-040C 4"	LN800T-422CL 4 x 3"	LN800T-422C 4 x 3"
COMBINATION WYE & 1/8 BEND(ONE PIECE)(HUB×HUB×HUB)
LN501-015 1-1/2"	LN501-020 2"	LN501-030 3"	LN501-040 4"
COMBINATION WYE & 1/8 BEND(TWO PIECE)(HUB×HUB×HUB)
LN503-020 2"
COUPLING (HUB×HUB)
LN100-012 1-1/4"	LN100-015 1-1/2"	LN100-020 2"	LN100-030 3"
LN100-040 4"	LN100-060 6"
DOUBLE 90° ELBOW (HUB×HUB×HUB)
LN327-015 1-1/2"	LN327-020 2"	LN327-030 3"	LN327-040 4"
LN327-241 2 x 1-1/2 x 1-1/2"
DOUBLE FIXTURE FITTING (ALL HUB)
LN500-020 2"	LN500-030 3"	LN500-241 2 x 1-1/2 x 1-1/2 x 1-1/2"	LN500-251 2" × 2" × 1-1-2" ×1-1-2"
LN500-257 2 x 1-1/2 x 2 x 2"	LN500-338 3 x 2 x 3 x 3"
DOUBLE SANITARY TEE (ALL HUB)
LN428-015 1-1/2"	LN428-020 2"	LN428-030 3"	LN428-040 4"
DOUBLE SANITARY TEE W / R & L SIDE INLET(ALL HUB)
LN439-338 3 x 3 x 3 x 3 x 2 x 2"
DOUBLE SANITARY TEE W /SIDE INLET (ALL HUB)
LN438-337 3 x 3 x 3 x 3 x1-1/ 2"	LN438-338 3 x 3 x 3 x 3 x 2"	LN438-420 4 x 4x 4 x 4 x 2"
DRUM TRAP W / CLEANOUT
LN702X-363 3 x 6 x 1-1/2"
EXPANSION JOINT (HUB×HUB)
LNH119-015 1-1/2"	LNH119-020 2"	LNH119-030 3"	LNH119-040 4"
EXPANSION JOINT (HUB×SPG)
LNH119S-030 3"
FEMALE ADAPTER (HUB×FIPT)
LN101-012 1-1/4"	LN101-015 1-1/2"	LN101-020 2"	LN101-030 3"
LN101-040 4"	LN101-060 6"
FLUSH ADAPTER (SPG×FIPT)
LN108-209 1-1/2×1/2"	LN108-210 1-1/2×3/4"	LN108-212 1-1/2 x 1-1/4"	LN108-251 2 x 1-1/2"
LN108-337 3×1-1/2"	LN108-338 3x 2"	LN108-422 4x 3"
FLUSH BUSHING (SPG×HUB)
LN107-212 1-1/2×1-1/4"	LN107-251 2×1-1/2"	LN107-337 3×1-1/2"	LN107-338 3×2"
LN107-419 4×1-1/2	LN107-420 4×2"	LN107-422 4×3"	LN107-532 6×4"
FLUSH C.O. PLUG (MPT)
LN110-020 2"	LN110-030 3"	LN110-040 4"
FLUSH CLOSET FLANGE (INSIDE 4", OUTSIDE 3")
LN815-040 4 x 4 / 4 x 3
HUB ADAPTER CAST IRON (HUB×SJ)
LN123-020 2"	LN123-030 3"	LN123-040 4"
HUB ADAPTER CAST IRON INCREASER (HUB×SJ)
LN123R-213 1-1/2 x 2"	LN123R-342 3 x 4"
LA PATTERN P-TRAP W/UNION&PLASTIC NUT(HUB×SJ)
LN711M-015 1-1/2"	LN711M-212 1-1/2 x 1-1/4"
MALE ADAPTER (HUB×MIPT)
LN109-012 1-1/4"	LN109-015 1-1/2"	LN109-020 2"	LN109-030 3"
LN109-040 4"	LN109-212 1-1/2×1-1/4"
MALE ADAPTER (SPG×MIPT)
LN111-012 1-1/4"	LN111-015 36893	LN111-020 2"	LN111-030 3"
LN111-040 4"	LN111-212 1-1/2×1-1/4"
NO-HUB ADAPTER (SPG×HUB)
LN119-020 2"	LN119-030 3"	LN119-040 4"	LN119-251 2 x 1-1/2"
LN119-422 4 x 3"
P-TRAP (HUB×HUB)
LN706X-015 1-1/2"	LN706X-020 2"	LN706X-030 3"	LN706X-040 4"
P-TRAP W/PLUG (HUB×HUB×CLEANOUT W/PLUG)
LN707X-015 1-1/2"	LN707X-020 2"
P-TRAP W/UNION &C/O (HUB×HUB×C/O)
LN712-015 1-1/2"
P-TRAP W/UNION JOINT (HUB×HUB)
LN708P-012 1-1/4"	LN708P-015 1-1/2"	LN708P-020 2"
PIPE INCREASER-REDUCER (HUBxHUB)
LN102-212 1-1/2×1-1/4"	LN102-251 2×1-1/2"	LN102-337 3×1-1/2"	LN102-338 3×2"
LN102-419 4×1-1/2"	LN102-420L 4×2"	LN102-420 4 x 2"	LN102-422L 4×3"
LN102-422 4×3"
PLUG WITH GASKET (MIPT)
LN106R-012 1-1/4"	LN106R-015 1-1/2"	LN106R-020 2"	LN106R-025 2-1/2"
LN106R-030 3"	LN106R-035 2-1/2"	LN106R-040 4"	LN106R-060 6"
REDUCING CLOSET FLANGE (SPG)
LN801-422 4 x 3"
REDUCING COMBINATION WYE & 1/8 BEND(HUB×HUB×HUB)
LN502-241 2 x 1-1/2 x 1-1/2"	LN502-251 2 x 2 x 1-1/2"	LN502-257 2 x 1-1/2 x 2"	LN502-337 3 x 3 x 1-1/2"
LN502-338 3 x 3 x 2"	LN502-420 4 x 4 x 2"	LN502-422 4 x 4 x 3"
REDUCING DOUBLE SANITARY TEE (ALL HUB)
LN429-251 2×2×1-1/2×1-1/2"	LN429-337 3×3×1-1/2×1-1/2"	LN429-338 3 x 3 x 2 x 2"	LN429-420 4 x 4 x 2 x 2"
LN429-422 4 x 4 x 3 x 3"	LN429-323 3 x 3 x 2 x 1-1/2"
REDUCING SANITARY TEE (HUB×HUB×HUB)
LN401-222 1-1/2 x 1-1/4 x 1-1/4"	LN401-212 1-1/2 x 1-1/2 x 1-1/4"	LN401-225 1-1/2 x 1-1/4 x 1-1/2"	LN401-241L 2×1-1/2×1-1/2"
LN401-241 3×3×2"	LN401-251L 2×2×1-1/2"	LN401-251 3×3×2"	LN401-257L 2×1-1/2×2"
LN401-257 3×3×2"	LN401-337 3×3×1-1/2"	LN401-338L 3×3×2"	LN401-338 3×3×2"
LN401-419 4 x 4 x 1-1/2"	LN401-420 4×4×2"	LN401-422 4×4×3"	LN401-532 6 x 6 x 4"
REDUCING STREET SANITARY TEE (SPG×HUB×HUB)
LN404-241 2×1-1/2×1-1/2"	LN404-251 2×2×1-1/2"	LN404-257 2×1-1/2×2"	LN404-337 3×3×1-1/2"
LN404-338 3 x 3 x 2"
REPAIR COUPLING (HUB×HUB)
LN130-015 1-1/2"	LN130-020 2"	LN130-030 3"	LN130-040 4"
RETURN BEND (HUB×HUB)
LN700-015 1-1/2"	LN700-020 2"	LN700-030 3"	LN700-040 4"
RETURN BEND (HUB×HUB×CLEANOUT W/PLUG)
LN701-015 1-1/2"	LN701-020 2"
SANITARY TEE (HUB×HUB×HUB)
LN400-012L 1-1/4"	LN400-012 1-1/4"	LN400-015L 1-1/2"	LN400-015 1-1/2"
LN400-020L 2"	LN400-020 2"	LN400-030 3"	LN400-040L 4"
LN400-040 4"	LN400-060 6"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-337 3 x 3 x 3 x 1-1/2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-337 3 x 3 x 3 x 1-1/2"	LN417-338 3 x 3 x 3 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-338 3 x 3 x 3 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-329 3 x 3 x 2 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-329 3 x 3 x 2 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-420 4 x 4 x 4 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-420 4 x 4 x 4 x 2"
SANITARY TEE W / R& L SIDE INLET (ALL HUB)
LN418-337 3 x 3 x 3 x 1-1/2 x 1-1/2"	LN418-338 3 x 3 x 3 x 2 x 2"	LN418-420 4"×4"×4"×2"×2"
SEWER & DRAIN ADAPTER (HUBxHUB)
LN117-422 4×3"	LN117-342 3 x 4"
SLIP PLUG (SPG)
LN110S-015 1-1/2"	LN110S-020 2"	LN110S-025 2-1/2"	LN110S-030 3"
LN110S-035 3-1/2"	LN110S-040 4"
STREET SANITARY TEE (SPG×HUB×HUB)
LN403-015 1-1/2"	LN403-020 2"	LN403-030 3"	LN403-040 4"
TEST TEE (HUBxHUBxFIPT)
LN445-015 1 -1/2"	LN445-015L 1 -1/2"	LN445-020 2"	LN445-020L 2"
LN445-030 3"	LN445-030L 3"	LN445-040 4"	LN445-040L 4"
LN445-427 4×3×4"
TEST TEE (HUB×HUB×CLEANOUT W/PLUG)
LN444X-427 4×3×4"	LN444X-015L 4×3×4"	LN444X-015 4×3×4"	LN444X-020L 4×3×4"
LN444X-020 4×3×4"	LN444X-030L 4×3×4"	LN444X-030 4×3×4"	LN444X-040L 4×3×4"
LN444X-040 4×3×4"
THREADED CAP (FIPT)
LN135-015 1-1/2"	LN135-020 2"	LN135-030 3
TRAP ADAPTER (HUB x SJ)
LN104-012 1-1/4"	LN104-015 1-1/2"	LN104-020 2"	LN104-212 1-1/2" X 1-1/4"
TRAP ADAPTER (SPGXSJ)
LN103-012 1-1/4"	LN103-015 1-1/2"	LN103-020 2"	LN103-212 1-1/2" X 1-1/4"
TRAP ADAPTER W/ PLASTIC NUT & WASHER (HUB×SJ)
LN104X-012 1-1/4"	LN104X-015 1-1/2"	LN104X-020 2"	LN104X-212 1-1/2×1-1/4"
TRAP ADAPTER W/ PLASTIC NUT & WASHER (SPG×SJ)
LN103X-012 1-1/4"	LN103X-015 1-1/2"	LN103X-020 2"	LN103X-212 1-1/2×1-1/4"
TRAP ADAPTER W/CHROME NUT & WASHER (HUB×SJ)
LN104W-020 2"	LN104W-212 1-1/2×1-1/4"
TRAP ADAPTER W/CHROME NUT & WASHER (SPG×SJ)
LN103W-015 1-1/2"	LN103W-020 2"	LN103W-212 1-1/2×1-1/4"
TRAP ADAPTER W/PLASTIC NUT (HUB×SJ)
LN104P-012 1-1/4"	LN104P-015 1-1/2"	LN104P-212 1-1/2×1-1/4"
TRAP ADAPTER W/PLASTIC NUT (SPG×SJ)
LN103P-012 1-1/4"	LN103P-015 1-1/2"	LN103P-212 1-1/2×1-1/4"
TRAY PLUG ADAPTER
LN900-015 1-1/2"
TRAY PLUG ADAPTER - SPIGOT
LN130X-015 1-1/2"
TWO-WAY CLEANOUT (HUB×HUB×HUB)
LN448-030 3"	LN448-040 4"
UNION (HUB×HUB)
LN126-015 1-1/2"	LN126-020 2"	LN126-030 3"	LN126-040 4"
VENT TEE (HUB×HUB×HUB)
LN441-015 1-1/2"	LN441-020 2"	LN441-030 3"	LN441-040 4"
LN441-337 3"×3"×1-1/2"	LN441-338 3"×3"×1-1/2"
# This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - Size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [3] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Royal Group Inc.
131 Regalcrest Court
Woodbridge, ON L4L 8P3
Canada
905-856-7550
Visit this company's website

Facility : CPF-PA

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe~	ABS	NAPCO Royal Pipe & Fittings	CSA B181.1
1 1/4" - 6" Sch 40
~ Product is authorized to bear the cNSF Mark.
Pipe~	ABS	Royal Plumbing Solutions	CSA B181.1
1 1/4" - 6" Sch 40
~ Product is authorized to bear the cNSF Mark.

Facility : CPF-UT

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Pipe~	ABS	NAPCO Royal Pipe & Fittings	CSA B181.1
1 1/4" - 6" Sch 40
~ Product is authorized to bear the cNSF Mark.
Pipe~	ABS	Royal Plumbing Solutions	CSA B181.1
1 1/4" - 6" Sch 40
~ Product is authorized to bear the cNSF Mark.

Spears Manufacturing Company
15853 Olden Street
P.O. Box 9203
Sylmar, CA 91342
United States
818-364-1611
Visit this company's website

Facility : # 2 Caney, KS

Joining Materials

Product Type

General Material

For Use With

Trade Name

Product Standard

Solvent Cement¢ §

ABS

DWV, SW

Spears ABS-71 Low VOC Medium Body Yellow ABS

CSA B181.1

+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[1] This primer may be used with any Certified Spears PVC or CPVC solvent cement.
[2] This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.
[3] Spears LW-5 One Step Low VOC Mustard CPVC Cement for Lab WasteTM is Certified for
    corrosive waste applications as part of the Spears LabWaste™ CPVC Corrosive Waste
    Drainage System, consisting of Spears LabWaste™ CPVC Pipe, Spears LabWaste™ CPVC
    Fittings, and LW-5 One Step Low VOC Mustard CPVC Cement for Lab Waste™.
[4] Spears OT-5 One step low VOC Mustard CPVC Cement for OceanTUFF™ is Certified for
    corrosive waste applications as part of the Spears OceanTUFF™ CPVC Corrosive Waste
    Drainage System, consisting of Spears OceanTUFF™ CPVC Pipe,OceanTUFF™ fittings and OT-5
    One Step Low VOC Mustard CPVC Cement for OceanTUFF™.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

Taizhou G-Good Adhesives Co., Ltd. DBA Linhai Gysi Adhesives Co. Ltd.
Shiniu Cun, Yanjiang Zhen
Linhai Shi, Zhejiang
China
86 576 8569 6612

Facility : Zhejiang, China

Joining Materials

Product Type	General Material	For Use With	Trade Name	Product Standard
Solvent Cement+ § [1] [2]	ABS	PW, DWV, SW	BAILEY Low VOC L-2235 ABS Heavy Bodied Pipe Cement	CSA B181.1
Solvent Cement+ § [1] [2]	ABS	PW, DWV, SW	ERA Low VOC L-2235 ABS Heavy Bodied Pipe Cement	CSA B181.1
Solvent Cement+ § [1] [2]	ABS	PW, DWV, SW	G-Good Low VOC L-2235 ABS Heavy Bodied Pipe Cement	CSA B181.1
+ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. +++ Material complies with NSF/ANSI/CAN 61 health effects requirements when tested at temperatures up to and including Commercial Hot (180° F). [1] The compliance of this product with the health effect requirements of NSF/ANSI Standard 61 has been determined based on the testing of pipe and fittings assembled using the cement and the P-1030 or P-1050 primer. [2] This product is acceptable for use with pipe and fittings sized 1/2" and greater diameter. [3] Certified for use with BAILEY P-1050 Clear Water Thin PVC/CPVC Plastic Pipe Cement Primer, ERA P-1050 Clear Water Thin PVC/CPVC Plastic Pipe Cement Primer, G-GOOD P-1050 Clear Water Thin PVC/CPVC Plastic Pipe Cement Primer, BAILEY P-1050 Purple Water Thin PVC/CPVC Plastic Pipe Cement Primer, ERA P-1050 Purple Water Thin PVC/CPVC Plastic Pipe Cement Primer, G-GOOD P-1050 Purple Water Thin PVC/CPVC Plastic Pipe Cement Primer.

Tigre USA Inc.
2315 Beloit Avenue
Janesville, WI 53546
United States
877-751-5371
608-754-4554
Visit this company's website

Facility : Janesville, WI

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢	ABS	Tigre	CSA B181.1
22 Bend
4" (601-070)
22 Street Bend
1 1/2" (601-096)	2" (605-030)
45 Sanitary Bend
1 1/2" (600-890)	2" (600-916)	3" (600-932)	4" (600-940)
45 Street Bend
2" (600-999)	3" (601-005)	4" (604-215)
90 Long Sweep Bend
2" (604-116)	3" (604-124)
90 Sanitary Bend
1 1/2" (600-601)	2" (600-627)	3" (600-643)	4" (600-676)
90 Sanitary Street Bend
3" (604-215)
Combination Tee-Wye
3" (604-280)	3" x 3" x 2" (604-603)
Coupling
3" (601-146)	4" (601-153)
Female Adapter
4" (601-419)
P-Trap
2" (602-334)
Sanitary Tee
2" (600-023)	2" x 2" x 1 12" (600-114)	3" x 3" x 2" (600-148)	3" (600-031)
4" (600-049)
Wye
2" (600-403)	3" (600-411)	3" x 3" x 2" (600-486)	4" (600-429)
4" x 4" x 2" (605-139)	4" x 4" x 3" (605-147)
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

Viterra Systems LLC
1830 Flower Ave.
Duarte, CA 91010
United States
626-716-2238
Visit this company's website

Facility : Hai Phong, Vietnam

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings# ¢ § [2] [3] [G]	ABS	Viterra	CSA B181.1
22½° STREET ELBOW(HUB×SPG)
A326-030 3"	A326-020 2"	A326-015 1-1/2"	A326-040 4"
22½°ELBOW(HUB×HUB)
A324-015 1-1/2"	A324-020 2"	A324-060 6"	A324-040 4"
A324-030 3"
45° STREET WYE (SPG×HUB×HUB)
A602-015 1 1/2"	A602-040 4"	A602-030 3"	A602-020 2"
45° REDUCING DOUBLE WYE(ALL HUB)
A612-251 2 x 2 x 1-1/2 x 1-1/2"	A612-337 3 x 3 x 1-1/2 x 1-1/2"	A612-532 6 x 6 x 4 x 4"	A612-420 4 x 4 x 2 x 2"
A612-422 4 x 4 x 3 x 3"	A612-338 3×3×2×2"
45° REDUCING STREET WYE(SPG×HUB×HUB)
A603-251 2 x 2 x 1-1/2"	A603-337 3 x 3 x 1-1/2"	A603-422 4 x 4 x 3"	A603-420 4 x 4 x 2"
A603-338 3 x 3 x 2"
45° REDUCING WYE(HUB×HUB×HUB)
A601-241 2×1-1/2×1-1/2"	A601-251 2×1-1/2×1-1/2"	A601-251L 2×2×1-1/2"	A601-337 2×1-1/2×1-1/2"
A601-337L 3×3×1-1/2"	A601-338 2×1-1/2×1-1/2"	A601-532 6×6×4"	A601-419 4 x 4 x 1-1/2"
A601-420 2×1-1/2×1-1/2"	A601-420L 4×4×2"	A601-422 2×1-1/2×1-1/2"	A601-422L 4×4×3"
A601-530 6 x 6 x 3"	A601-338L 3×3×2"
45° STREET ELBOW (HUB×SPG)
A323-012 1-1/4"	A323-015 1-1/2"	A323-060 6"	A323-030L 3"
A323-040 4"	A323-020L 2"
45° STREET ELBOW-SHORT TURN (HUB×SPG)
A323-015S 1-1/2"	A323-040S 4"	A323-030S 3"	A323-020S 2"
45° WYE (HUB×HUB×HUB)
A600-040 4"	A600-040L 4"	A600-060 6"	A600-012 1-1/4"
A600-030L 3"	A600-015L 1-1/2"	A600-020 2"	A600-020L 2"
A600-030 3"	A600-015 1-1/2"
45°DOUBLE WYE(ALL HUB)
A611-015 1-1/2"	A611-020 2"	A611-040 4"	A611-030L 3"
A611-030 3"
45°ELBOW (HUB×HUB)
A321-012 1-1/4"	A321-015 1-1/2"	A321-060 6"	A321-030L 3"
A321-040 4"	A321-020L 2"
45°ELBOW-SHORT TURN (HUB×HUB)
A321-015S 1-1/2"	A321-040S 4"	A321-030S 3"	A321-020S 2"
45°WYE(HUB×HUB×HUB)
A601-210 1-1/2×1-1/2"×3/4"	A601-209 1-1/2×1-1/2"×1/2"
60° STREET ELBOW (HUB×SPG)
A320-015 1-1/2"	A320-040 4"	A320-030 3"	A320-020 2"
60°ELBOW(HUB×HUB)
A319-015 1-1/2"	A319-040 4"	A319-030 3"	A319-020 2"
90° LONG SWEEP ELBOW,STREET(HUB×SPG)
A309-020 2"	A309-040 4"	A309-030 3"
90° REDUCING CLOSET ELBOW(HUB×HUB)
A329-422 4×3"
90° REDUCING CLOSET STREET ELBOW (HUB×SPG)
A330-422 4 x 3"	A330-342 3 x 4"
90° STREET ELBOW (HUB×SPG)
A302-012 1-1/4"	A302-015 1-1/2"	A302-060 6"	A302-030 3"
A302-040 4"	A302-020 2"
90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
A310-338 3 x 3 x 2"
90° STREET ELBOW-SHORT TURN (HUB×SPG)
A302-015S 1-1/2"	A302-040S 4"	A302-030S 3"	A302-020S 2"
90° VENT ELBOW(HUB×HUB)
A331-012 1-1/4"	A331-015 1-1/2"	A331-040 4"	A331-030 3"
A331-020 2"
90°ELBOW (HUB×HUB)
A300-012 1-1/4"	A300-015 1-1/2"	A300-060 6"	A300-030 3"
A300-040 4"	A300-020 2"
90°ELBOW W/ LOW HEEL INLET (HUB×HUB×HUB)
A303-337 3 x 3 x 1-1/2"	A303-338 3 x 3 x 2"	A303-420 4 x 4 x 2"	A304-040 4"
A304-015 1-1/2"	A304-020 2"	A304-030 3"	A304-012 1-1/4"
90°ELBOW WITH SIDE INLET (HUB×HUB×HUB)
A300S-338 3 x 3 x 2"	A300S-337 3 x 3 x 1-1/2"
90°ELBOW-SHORT TURN (HUB×HUB)
A300-015S 1-1/2"	A300-020S 2"	A300-012S 1-1/4"	A300-040S 4"
A300-060S 6"	A300-030S 3"
90°REDUCING CLOSET STREET ELBOW W/TESTCAP(HUB×SPG)
A330X-422 4 x 3"	A330X-342 3 x 4"
ABS-COPPER ADAPTER (HUB×SJ)
A120-212 1-1/2×1-1/4"	A120-015 1-1/2"
CAP(HUB)
A116-012 1-1/4"	A116-015 1-1/2"	A116-040 4"	A116-030 3"
A116-020 2"
CLEANOUT ADAPTER (SPG×FIPT)
A105-012 1-1/4"	A105-015 1-1/2"	A105-060 6"	A105-030 3"
A105-040 4"	A105-020 2"
CLEANOUT ADAPTER W/PLUG(SPG×CLEANOUT W/PLUG)
A105X-012 1-1/4"	A105X-015 1-1/2"	A105X-060 6"	A105X-030 3"
A105X-040 4"	A105X-020 2"
CLEANOUT PLUG(MIPT)
A106-015 1-1/2"	A106-020 2"	A106-040 4"	A106-030 3"
A106-035 3-1/2"	A106-025 2-1/2"
CLEANOUT WYE (HUB×HUB×FIPT)
A604-015 1-1/2"
CLOSET FLANGE W/ADJUSTABLE METAL RING (H)
A811-040 4"
CLOSET FLANGE W/ADJUSTABLE METAL RING (S)
A811-040 4"×4"
CLOSET FLANGE W/ KNOCKOUT TEST PLUG(HUB)
A800T-040 4 x 4"	A800T-422L 4 x 3"	A800T-422 4 x 3"
CLOSET FLANGE W/ PIPE STOP(HUB)
A815PS-040 4 x 4 / 4 x 3
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING(HUB)
A810P-040 4 x 4"
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING(SPG)
A812P-422 4 x 3"	A812P-040 4 x 4"
CLOSET FLANGE W/KONCKOUT & PIPE STOP(HUB)
A815K-040 4 x 4 / 4 x 3
CLOSET FLANGE W/RING-PULL TEST PLUG(HUB)
A800R-040 4 x 4"	A800R-422L 4 x 3"	A800R-422 4 x 3"
CLOSET FLANGE W/THREADED TEST PLUG(HUB)
A800T-040C 4"	A800T-422CL 4 x 3"	A800T-422C 4 x 3"
CLOSET FLANGE(FIPT)
A830-422 4 x 3
CLOSET FLANGE(HUB)
A800-040 4×4"	A800-422L 4×3"	A800-422 4×3"
CLOSET FLANGE(MIPT)
A831-422 4 x 3"
COMBINATION WYE &1/8 BEND (TWO PIECE)(HUB×HUB×HUB)
A503-020 2"
COMBINATION WYE &1/8 BEND(ONE PIECE)(HUB×HUB×HUB)
A501-015 1-1/2"	A501-040 4"	A501-030 3"	A501-020 2"
COUPLING(HUB×HUB)
A100-012 1-1/4"	A100-015 1-1/2"	A100-060 6"	A100-030 3"
A100-040 4"	A100-020 2"
DOUBLE 90° ELBOW(HUB×HUB×HUB)
A327-015 1-1/2"	A327-020 2"	A327-241 2 x 1-1/2 x 1-1/2"	A327-040 4"
A327-030 3"
DOUBLE FIXTURE FITTING(ALL HUB)
A500-020 2"	A500-030 3"	A500-338 3 x 2 x 3 x 3"	A500-251 2"×2"×1-1-2"×1-1-2"
A500-257 2 x 1-1/2 x 2 x 2"	A500-241 2 x 1-1/2 x 1-1/2 x 1-1/2"
DOUBLE SANITARY TEE W / R & L SIDE INLET(ALL HUB)
A439-338 3 x 3 x 3 x 3 x 2 x 2"
DOUBLE SANITARY TEE W /SIDE INLET(ALL HUB)
A438-337 3 x 3 x 3 x 3 x1-1/ 2"	A438-420 4 x 4x 4 x 4 x 2"	A438-338 3 x 3 x 3 x 3 x 2"
DOUBLE SANITARY TEE(ALL HUB)
A428-020 2"	A428-015 1-1/2"	A428-040 4"	A428-030 3"
DRUM TRAP W / CLEANOUT
A702X-363 3 x 6 x 1-1/2"
EXPANSION JOINT(HUB×HUB)
AH119-015 1-1/2"	AH119-040 4"	AH119-030 3"	AH119-020 2"
EXPANSION JOINT(HUB×SPG)
AH119S-030 3"
FEMALE ADAPTER(HUB×FIPT)
A101-012 1-1/4"	A101-015 1-1/2"	A101-060 6"	A101-030 3"
A101-040 4"	A101-020 2"
FLUSH ADAPTER (SPG×FIPT)
A108-212 1-1/2 x 1-1/4"	A108-251 2 x 1-1/2"	A108-337 3×1-1/2"	A108-210 1-1/2×3/4"
A108-422 4x 3"	A108-209 1-1/2×1/2"	A108-338 3x 2"
FLUSH BUSHING(SPG×HUB)
A107-212 1-1/2×1-1/4"	A107-251 2×1-1/2"	A107-337 3×1-1/2"	A107-532 6×4"
A107-419 4×1-1/2	A107-420 4×2"	A107-422 4×3"	A107-338 3×2"
FLUSH C.O. PLUG(MPT)
A110-020 2"	A110-040 4"	A110-030 3"
FLUSH CLOSET FLANGE (INSIDE 4", OUTSIDE 3")
A815-040 4 x 4 / 4 x 3
HUB ADAPTER CAST IRON (HUB×SJ)
A123-020 2"	A123-040 4"	A123-030 3"
HUB ADAPTER CAST IRON INCREASER(HUB×SJ)
A123R-342 3 x 4"	A123R-213 1-1/2 x 2"
LA PATTERN P-TRAP W/UNION&PLASTIC NUT(HUB×SJ)
A711M-212 1-1/2 x 1-1/4"	A711M-015 1-1/2"
MALE ADAPTER(HUB×MIPT)
A109-012 1-1/4"	A109-015 1-1/2"	A109-212 1-1/2×1-1/4"	A109-030 3"
A109-040 4"	A109-020 2"
MALE ADAPTER(SPG×MIPT)
A111-012 1-1/4"	A111-015 36893	A111-212 1-1/2×1-1/4"	A111-030 3"
A111-040 4"	A111-020 2"
NO-HUB ADAPTER(SPG×HUB)
A119-020 2"	A119-030 3"	A119-422 4 x 3"	A119-251 2 x 1-1/2"
A119-040 4"
P-TRAP W/PLUG(HUB×HUB×CLEANOUT W/PLUG)
A707X-020 2"	A707X-015 1-1/2"
P-TRAP W/UNION &C/O(HUB×HUB×C/O)
A712-015 1-1/2"
P-TRAP W/UNION JOINT(HUB×HUB)
A708P-012 1-1/4"	A708P-020 2"	A708P-015 1-1/2"
P-TRAP(HUB×HUB)
A706X-015 1-1/2"	A706X-040 4"	A706X-030 3"	A706X-020 2"
PIPE INCREASER-REDUCER( HUBxHUB)
A102-422L 4×3"	A102-212 1-1/2×1-1/4"	A102-251 2×1-1/2"	A102-337 3×1-1/2"
A102-338 3×2"	A102-419 4×1-1/2"	A102-420 4 x 2"	A102-420L 4×2"
A102-422 4×3"
PLUG WITH GASKET(MIPT)
A106R-012 1-1/4"	A106R-015 1-1/2"	A106R-020 2"	A106R-060 6"
A106R-030 3"	A106R-035 2-1/2"	A106R-040 4"	A106R-025 2-1/2"
REDUCING CLOSET FLANGE(SPG)
A801-422 4 x 3"
REDUCING COMBINATION WYE & 1/8 BEND(HUB×HUB×HUB)
A502-241 2 x 1-1/2 x 1-1/2"	A502-251 2 x 2 x 1-1/2"	A502-257 2 x 1-1/2 x 2"	A502-422 4 x 4 x 3"
A502-338 3 x 3 x 2"	A502-420 4 x 4 x 2"	A502-337 3 x 3 x 1-1/2"
REDUCING DOUBLE SANITARY TEE(ALL HUB)
A429-251 2×2×1-1/2×1-1/2"	A429-323 3 x 3 x 2 x 1-1/2"	A429-422 4 x 4 x 3 x 3"	A429-338 3 x 3 x 2 x 2"
A429-420 4 x 4 x 2 x 2"	A429-337 3×3×1-1/2×1-1/2"
REDUCING SANITARY TEE(HUB×HUB×HUB)
A401-212 1-1/2 x 1-1/2 x 1-1/4"	A401-532 6 x 6 x 4"	A401-225 1-1/2 x 1-1/4 x 1-1/2"	A401-241 3×3×2"
A401-241L 2×1-1/2×1-1/2"	A401-251 3×3×2"	A401-251L 2×2×1-1/2"	A401-257 3×3×2"
A401-257L 2×1-1/2×2"	A401-337 3×3×1-1/2"	A401-338 3×3×2"	A401-338L 3×3×2"
A401-419 4 x 4 x 1-1/2"	A401-420 4×4×2"	A401-422 4×4×3"	A401-222 1-1/2 x 1-1/4 x 1-1/4"
REDUCING STREET SANITARY TEE(SPG×HUB×HUB)
A404-241 2×1-1/2×1-1/2"	A404-251 2×2×1-1/2"	A404-338 3 x 3 x 2"	A404-337 3×3×1-1/2"
A404-257 2×1-1/2×2"
REPAIR COUPLING(HUB×HUB)
A130-015 1-1/2"	A130-040 4"	A130-030 3"	A130-020 2"
RETURN BEND(HUB×HUB)
A700-015 1-1/2"	A700-040 4"	A700-030 3"	A700-020 2"
RETURN BEND(HUB×HUB×CLEANOUT W/PLUG)
A701-020 2"	A701-015 1-1/2"
SANITARY TEE W / LEFT SIDE INLET(ALL HUB)
A416-338 3 x 3 x3 x 2"
SANITARY TEE W / LEFT SIDE INLET(ALL HUB)
A417-329 3 x 3 x 2 x 2"
SANITARY TEE W / LEFT SIDE INLET(ALL HUB)
A416-420 4 x 4 x 4 x 2"	A416-329 3 x 3 x 2 x 2"
SANITARY TEE W / LEFT SIDE INLET(ALL HUB)
A417-337 3 x 3 x 3 x 1-1/2"	A417-420 4 x 4 x 4 x 2"	A417-338 3 x 3 x3x 2"
SANITARY TEE W / LEFT SIDE INLET(ALL HUB)
A416-337 3 x 3 x 3 x 1-1/2"
SANITARY TEE W / R& L SIDE INLET(ALL HUB)
A418-337 3 x 3 x 3 x 1-1/2 x 1-1/2"	A418-420 4"×4"×4"×2"×2"	A418-338 3 x 3 x 3 x 2 x 2"
SANITARY TEE(HUB×HUB×HUB)
A400-012 1-1/4"	A400-012L 1-1/4"	A400-015 1-1/2"	A400-015L 1-1/2"
A400-060 6"	A400-020L 2"	A400-030 3"	A400-040 4"
A400-040L 4"	A400-020 2"
SEWER & DRAIN ADAPTER(HUBxHUB)
A117-422 4×3"	A117-342 3 x 4"
SLIP PLUG (SPG)
A110S-015 1-1/2"	A110S-020 2"	A110S-040 4"	A110S-030 3"
A110S-035 3-1/2"	A110S-025 2-1/2"
STREET SANITARY TEE(SPG×HUB×HUB)
A403-020 2"	A403-015 1-1/2"	A403-040 4"	A403-030 3"
TEST TEE(HUBxHUBxFIPT)
A445-015 1 -1/2"	A445-015L 1 -1/2"	A445-020 2"	A445-020L 2"
A445-427 4×3×4"	A445-030L 3"	A445-040 4"	A445-040L 4"
A445-030 3"
TEST TEE(HUB×HUB×CLEANOUT W/PLUG)
A444X-015 4×3×4"	A444X-015L 4×3×4"	A444X-020 4×3×4"	A444X-020L 4×3×4"
A444X-427 4×3×4"	A444X-030L 4×3×4"	A444X-040 4×3×4"	A444X-040L 4×3×4"
A444X-030 4×3×4"
THREADED CAP (FIPT)
A135-015 1-1/2"	A135-020 2"	A135-030 3"
TRAP ADAPTER (HUB x SJ)
A104-212 1-1/2" X 1-1/4"	A104-020 2"	A104-015 1-1/2"	A104-012 1-1/4"
TRAP ADAPTER W/ PLASTIC NUT & WASHER(HUB×SJ)
A104X-020 2"	A104X-212 1-1/2×1-1/4"	A104X-015 1-1/2"	A104X-012 1-1/4"
TRAP ADAPTER W/ PLASTIC NUT & WASHER(SPG×SJ)
A103X-015 1-1/2"	A103X-212 1-1/2×1-1/4"	A103X-012 1-1/4"	A103X-020 2"
TRAP ADAPTER W/CHROME NUT & WASHER(HUB×SJ)
A104W-020 2"	A104W-212 1-1/2×1-1/4"
TRAP ADAPTER W/CHROME NUT & WASHER(SPG×SJ)
A103W-020 2"	A103W-212 1-1/2×1-1/4"	A103W-015 1-1/2"
TRAP ADAPTER W/PLASTIC NUT(HUB×SJ)
A104P-212 1-1/2×1-1/4"	A104P-015 1-1/2"	A104P-012 1-1/4"
TRAP ADAPTER W/PLASTIC NUT(SPG×SJ)
A103P-015 1-1/2"	A103P-212 1-1/2×1-1/4"	A103P-012 1-1/4"
TRAP ADAPTER(SPGXSJ)
A103-020 2"	A103-015 1-1/2"	A103-012 1-1/4"	A103-212 1-1/2" X 1-1/4"
TRAY PLUG ADAPTER
A900-015 1-1/2"
TRAY PLUG ADAPTER - SPIGOT
A130X-015 1-1/2"
TWO-WAY CLEANOUT(HUB×HUB×HUB)
A448-040 4"	A448-030 3"
UNION(HUB×HUB)
A126-040 4"	A126-015 1-1/2"	A126-030 3"	A126-020 2"
VENT TEE(HUB×HUB×HUB)
A441-338 3"×3"×1-1/2"	A441-337 3"×3"×1-1/2"	A441-030 3"	A441-020 2"
A441-015 1-1/2"	A441-040 4"
# This product may be marked with an alternate trade name: Liansu. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - Size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [3] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

Viterra Systems LLC
1830 Flower Ave.
Duarte, CA 91010
United States
626-716-2238

Facility : Jawa Tengah, Indonesia

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢ § [2] [3] [G]	ABS	Viterra	CSA B181.1
22½° ELBOW (HUB×HUB)
LN324-015 1-1/2"	LN324-020 2"	LN324-030 3"	LN324-040 4"
LN324-060 6"
22½° STREET ELBOW (HUB×SPG)
LN326-015 1-1/2"	LN326-020 2"	LN326-030 3"	LN326-040 4"
45° DOUBLE WYE (ALL HUB)
LN611-015 1-1/2"	LN611-020 2"	LN611-030L 3"	LN611-030 3"
LN611-040 4"
45° ELBOW (HUB×HUB)
LN321-012 1-1/4"	LN321-015 1-1/2"	LN321-020L 2"	LN321-030L 3"
LN321-040 4"	LN321-060 6"
45° ELBOW-SHORT TURN (HUB×HUB)
LN321-015S 1-1/2"	LN321-020S 2"	LN321-030S 3"	LN321-040S 4"
45° REDUCING DOUBLE WYE (ALL HUB)
LN612-251 2 x 2 x 1-1/2 x 1-1/2"	LN612-337 3 x 3 x 1-1/2 x 1-1/2"	LN612-338 3×3×2×2"	LN612-420 4 x 4 x 2 x 2"
LN612-422 4 x 4 x 3 x 3"	LN612-532 6 x 6 x 4 x 4"
45° REDUCING STREET WYE(SPG×HUB×HUB)
LN603-251 2 x 2 x 1-1/2"	LN603-337 3 x 3 x 1-1/2"	LN603-338 3 x 3 x 2"	LN603-420 4 x 4 x 2"
LN603-422 4 x 4 x 3"
45° REDUCING WYE (HUB×HUB×HUB)
LN601-241 2×1-1/2×1-1/2"	LN601-251L 2×2×1-1/2"	LN601-251 2×1-1/2×1-1/2"	LN601-337L 3×3×1-1/2"
LN601-337 2×1-1/2×1-1/2"	LN601-338L 3×3×2"	LN601-338 2×1-1/2×1-1/2"	LN601-419 4 x 4 x 1-1/2"
LN601-420L 4×4×2"	LN601-420 2×1-1/2×1-1/2"	LN601-422L 4×4×3"	LN601-422 2×1-1/2×1-1/2"
LN601-530 6 x 6 x 3"	LN601-532 6×6×4"
45° STREET ELBOW (HUB×SPG)
LN323-012 1-1/4"	LN323-015 1-1/2"	LN323-020L 2"	LN323-030L 3"
LN323-040 4"	LN323-060 6"
45° STREET ELBOW-SHORT TURN (HUB×SPG)
LN323-015S 1-1/2"	LN323-020S 2"	LN323-030S 3"	LN323-040S 4"
45° STREET WYE (SPG×HUB×HUB)
LN602-015 1 1/2"	LN602-020 2"	LN602-030 3"	LN602-040 4"
45° WYE (HUB×HUB×HUB)
LN600-012 1-1/4"	LN600-015L 1-1/2"	LN600-015 1-1/2"	LN600-020L 2"
LN600-020 2"	LN600-030L 3"	LN600-030 3"	LN600-040L 4"
LN600-040 4"	LN600-060 6"	LN601-209 1-1/2×1-1/2"×1/2"	LN601-210 1-1/2×1-1/2"×3/4"
60° ELBOW (HUB×HUB)
LN319-015 1-1/2"	LN319-020 2"	LN319-030 3"	LN319-040 4"
60° STREET ELBOW (HUB×SPG)
LN320-015 1-1/2"	LN320-020 2"	LN320-030 3"	LN320-040 4"
90° ELBOW (HUB×HUB)
LN300-012 1-1/4"	LN300-015 1-1/2"	LN300-020 2"	LN300-030 3"
LN300-040 4"	LN300-060 6"
90° ELBOW W/ LOW HEEL INLET (HUB×HUB×HUB)
LN303-337 3 x 3 x 1-1/2"	LN303-338 3 x 3 x 2"	LN303-420 4 x 4 x 2"
90° ELBOW WITH SIDE INLET (HUB×HUB×HUB)
LN300S-337 3 x 3 x 1-1/2"	LN300S-338 3 x 3 x 2"
90° ELBOW-SHORT TURN (HUB×HUB)
LN300-012S 1-1/4"	LN300-015S 1-1/2"	LN300-020S 2"	LN300-030S 3"
LN300-040S 4"	LN300-060S 6"
90° LONG SWEEP ELBOW (HUB×HUB)
LN304-012 1-1/4"	LN304-015 1-1/2"	LN304-020 2"	LN304-030 3"
LN304-040 4"
90° LONG SWEEP ELBOW, STREET (HUB×SPG)
LN309-015 1-1/2"	LN309-020 2"	LN309-030 3"	LN309-040 4"
90° REDUCING CLOSET ELBOW (HUB×HUB)
LN329-422 4×3"
90° REDUCING CLOSET ST ELBOW W/ TEST CAP (HUB×SPG)
LN330X-342 3 x 4"	LN330X-422 4 x 3"
90° REDUCING CLOSET STREET ELBOW (HUB×SPG)
LN330-342 3 x 4"	LN330-422 4 x 3"
90° STREET ELBOW (HUB×SPG)
LN302-012 1-1/4"	LN302-015 1-1/2"	LN302-020 2"	LN302-030 3"
LN302-040 4"	LN302-060 6"
90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
LN310-338 3 x 3 x 2"
90° STREET ELBOW W/ LOW HEEL INLET (HUB×SPG×HUB)
LN310-338 3 x 3 x 2"
90° STREET ELBOW-SHORT TURN (HUB×SPG)
LN302-015S 1-1/2"	LN302-020S 2"	LN302-030S 3"	LN302-040S 4"
90° VENT ELBOW (HUB×HUB)
LN331-012 1-1/4"	LN331-015 1-1/2"	LN331-020 2"	LN331-030 3"
LN331-040 4"
ABS-COPPER ADAPTER (HUB×SJ)
LN120-015 1-1/2"	LN120-212 1-1/2×1-1/4"
CAP (HUB)
LN116-012 1-1/4"	LN116-015 1-1/2"	LN116-020 2"	LN116-030 3"
LN116-040 4"	LN116-060 6"
CLEANOUT ADAPTER (SPG×FIPT)
LN105-012 1-1/4"	LN105-015 1-1/2"	LN105-020 2"	LN105-030 3"
LN105-040 4"	LN105-060 6"
CLEANOUT ADAPTER W/PLUG (SPG×CLEANOUT W/PLUG)
LN105X-012 1-1/4"	LN105X-015 1-1/2"	LN105X-020 2"	LN105X-030 3"
LN105X-040 4"	LN105X-060 6"
CLEANOUT PLUG (MIPT)
LN106-015 1-1/2"	LN106-020 2"	LN106-025 2-1/2"	LN106-030 3"
LN106-035 3-1/2"	LN106-040 4"
CLEANOUT WYE (HUB×HUB×FIPT)
LN604-015 1-1/2"
CLOSET FLANGE W/ADJUSTABLE METAL RING (H)
LN811-040 4"
CLOSET FLANGE W/ADJUSTABLE METAL RING (S)
LN811-040 4"×4"
CLOSET FLANGE (FIPT)
LN830-422 4 x 3
CLOSET FLANGE (HUB)
LN800-040 4×4"	LN800-422L 4×3"	LN800-422 4×3"
CLOSET FLANGE (MIPT)
LN831-422 4 x 3"
CLOSET FLANGE W/ KNOCKOUT TEST PLUG (HUB)
LN800T-040 4 x 4"	LN800T-422L 4 x 3"	LN800T-422 4 x 3"
CLOSET FLANGE W/ PIPE STOP (HUB)
LN815PS-040 4 x 4 / 4 x 3
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING (HUB)
LN810P-040 4 x 4"
CLOSET FLANGE W/ADJUSTABLE PLASTIC RING (SPG)
LN812P-040 4 x 4"	LN812P-422 4 x 3"
CLOSET FLANGE W/KONCKOUT & PIPE STOP (HUB)
LN815K-040 4 x 4 / 4 x 3
CLOSET FLANGE W/RING-PULL TEST PLUG (HUB)
LN800R-040 4 x 4"	LN800R-422L 4 x 3"	LN800R-422 4 x 3"
CLOSET FLANGE W/THREADED TEST PLUG (HUB)
LN800T-040C 4"	LN800T-422CL 4 x 3"	LN800T-422C 4 x 3"
COMBINATION WYE & 1/8 BEND(ONE PIECE)(HUB×HUB×HUB)
LN501-015 1-1/2"	LN501-020 2"	LN501-030 3"	LN501-040 4"
COMBINATION WYE & 1/8 BEND(TWO PIECE)(HUB×HUB×HUB)
LN503-020 2"
COUPLING (HUB×HUB)
LN100-012 1-1/4"	LN100-015 1-1/2"	LN100-020 2"	LN100-030 3"
LN100-040 4"	LN100-060 6"
DOUBLE 90° ELBOW (HUB×HUB×HUB)
LN327-015 1-1/2"	LN327-020 2"	LN327-030 3"	LN327-040 4"
LN327-241 2 x 1-1/2 x 1-1/2"
DOUBLE FIXTURE FITTING (ALL HUB)
LN500-020 2"	LN500-030 3"	LN500-241 2 x 1-1/2 x 1-1/2 x 1-1/2"	LN500-251 2" × 2" × 1-1-2" ×1-1-2"
LN500-257 2 x 1-1/2 x 2 x 2"	LN500-338 3 x 2 x 3 x 3"
DOUBLE SANITARY TEE (ALL HUB)
LN428-015 1-1/2"	LN428-020 2"	LN428-030 3"	LN428-040 4"
DOUBLE SANITARY TEE W / R & L SIDE INLET(ALL HUB)
LN439-338 3 x 3 x 3 x 3 x 2 x 2"
DOUBLE SANITARY TEE W /SIDE INLET (ALL HUB)
LN438-337 3 x 3 x 3 x 3 x1-1/ 2"	LN438-338 3 x 3 x 3 x 3 x 2"	LN438-420 4 x 4x 4 x 4 x 2"
DRUM TRAP W / CLEANOUT
LN702X-363 3 x 6 x 1-1/2"
EXPANSION JOINT (HUB×HUB)
LNH119-015 1-1/2"	LNH119-020 2"	LNH119-030 3"	LNH119-040 4"
EXPANSION JOINT (HUB×SPG)
LNH119S-030 3"
FEMALE ADAPTER (HUB×FIPT)
LN101-012 1-1/4"	LN101-015 1-1/2"	LN101-020 2"	LN101-030 3"
LN101-040 4"	LN101-060 6"
FLUSH ADAPTER (SPG×FIPT)
LN108-209 1-1/2×1/2"	LN108-210 1-1/2×3/4"	LN108-212 1-1/2 x 1-1/4"	LN108-251 2 x 1-1/2"
LN108-337 3×1-1/2"	LN108-338 3x 2"	LN108-422 4x 3"
FLUSH BUSHING (SPG×HUB)
LN107-212 1-1/2×1-1/4"	LN107-251 2×1-1/2"	LN107-337 3×1-1/2"	LN107-338 3×2"
LN107-419 4×1-1/2	LN107-420 4×2"	LN107-422 4×3"	LN107-532 6×4"
FLUSH C.O. PLUG (MPT)
LN110-020 2"	LN110-030 3"	LN110-040 4"
FLUSH CLOSET FLANGE (INSIDE 4", OUTSIDE 3")
LN815-040 4 x 4 / 4 x 3
HUB ADAPTER CAST IRON (HUB×SJ)
LN123-020 2"	LN123-030 3"	LN123-040 4"
HUB ADAPTER CAST IRON INCREASER (HUB×SJ)
LN123R-213 1-1/2 x 2"	LN123R-342 3 x 4"
LA PATTERN P-TRAP W/UNION&PLASTIC NUT(HUB×SJ)
LN711M-015 1-1/2"	LN711M-212 1-1/2 x 1-1/4"
MALE ADAPTER (HUB×MIPT)
LN109-012 1-1/4"	LN109-015 1-1/2"	LN109-020 2"	LN109-030 3"
LN109-040 4"	LN109-212 1-1/2×1-1/4"
MALE ADAPTER (SPG×MIPT)
LN111-012 1-1/4"	LN111-015 36893	LN111-020 2"	LN111-030 3"
LN111-040 4"	LN111-212 1-1/2×1-1/4"
NO-HUB ADAPTER (SPG×HUB)
LN119-020 2"	LN119-030 3"	LN119-040 4"	LN119-251 2 x 1-1/2"
LN119-422 4 x 3"
P-TRAP (HUB×HUB)
LN706X-015 1-1/2"	LN706X-020 2"	LN706X-030 3"	LN706X-040 4"
P-TRAP W/PLUG (HUB×HUB×CLEANOUT W/PLUG)
LN707X-015 1-1/2"	LN707X-020 2"
P-TRAP W/UNION &C/O (HUB×HUB×C/O)
LN712-015 1-1/2"
P-TRAP W/UNION JOINT (HUB×HUB)
LN708P-012 1-1/4"	LN708P-015 1-1/2"	LN708P-020 2"
PIPE INCREASER-REDUCER (HUBxHUB)
LN102-212 1-1/2×1-1/4"	LN102-251 2×1-1/2"	LN102-337 3×1-1/2"	LN102-338 3×2"
LN102-419 4×1-1/2"	LN102-420L 4×2"	LN102-420 4 x 2"	LN102-422L 4×3"
LN102-422 4×3"
PLUG WITH GASKET (MIPT)
LN106R-012 1-1/4"	LN106R-015 1-1/2"	LN106R-020 2"	LN106R-025 2-1/2"
LN106R-030 3"	LN106R-035 2-1/2"	LN106R-040 4"	LN106R-060 6"
REDUCING CLOSET FLANGE (SPG)
LN801-422 4 x 3"
REDUCING COMBINATION WYE & 1/8 BEND(HUB×HUB×HUB)
LN502-241 2 x 1-1/2 x 1-1/2"	LN502-251 2 x 2 x 1-1/2"	LN502-257 2 x 1-1/2 x 2"	LN502-337 3 x 3 x 1-1/2"
LN502-338 3 x 3 x 2"	LN502-420 4 x 4 x 2"	LN502-422 4 x 4 x 3"
REDUCING DOUBLE SANITARY TEE (ALL HUB)
LN429-251 2×2×1-1/2×1-1/2"	LN429-337 3×3×1-1/2×1-1/2"	LN429-338 3 x 3 x 2 x 2"	LN429-420 4 x 4 x 2 x 2"
LN429-422 4 x 4 x 3 x 3"	LN429-323 3 x 3 x 2 x 1-1/2"
REDUCING SANITARY TEE (HUB×HUB×HUB)
LN401-222 1-1/2 x 1-1/4 x 1-1/4"	LN401-212 1-1/2 x 1-1/2 x 1-1/4"	LN401-225 1-1/2 x 1-1/4 x 1-1/2"	LN401-241L 2×1-1/2×1-1/2"
LN401-241 3×3×2"	LN401-251L 2×2×1-1/2"	LN401-251 3×3×2"	LN401-257L 2×1-1/2×2"
LN401-257 3×3×2"	LN401-337 3×3×1-1/2"	LN401-338L 3×3×2"	LN401-338 3×3×2"
LN401-419 4 x 4 x 1-1/2"	LN401-420 4×4×2"	LN401-422 4×4×3"	LN401-532 6 x 6 x 4"
REDUCING STREET SANITARY TEE (SPG×HUB×HUB)
LN404-241 2×1-1/2×1-1/2"	LN404-251 2×2×1-1/2"	LN404-257 2×1-1/2×2"	LN404-337 3×3×1-1/2"
LN404-338 3 x 3 x 2"
REPAIR COUPLING (HUB×HUB)
LN130-015 1-1/2"	LN130-020 2"	LN130-030 3"	LN130-040 4"
RETURN BEND (HUB×HUB)
LN700-015 1-1/2"	LN700-020 2"	LN700-030 3"	LN700-040 4"
RETURN BEND (HUB×HUB×CLEANOUT W/PLUG)
LN701-015 1-1/2"	LN701-020 2"
SANITARY TEE (HUB×HUB×HUB)
LN400-012L 1-1/4"	LN400-012 1-1/4"	LN400-015L 1-1/2"	LN400-015 1-1/2"
LN400-020L 2"	LN400-020 2"	LN400-030 3"	LN400-040L 4"
LN400-040 4"	LN400-060 6"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-337 3 x 3 x 3 x 1-1/2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-337 3 x 3 x 3 x 1-1/2"	LN417-338 3 x 3 x 3 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-338 3 x 3 x 3 x 2"	LN416-329 3 x 3 x 2 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-329 3 x 3 x 2 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN416-420 4 x 4 x 4 x 2"
SANITARY TEE W / LEFT SIDE INLET (ALL HUB)
LN417-420 4 x 4 x 4 x 2"
SANITARY TEE W / R& L SIDE INLET (ALL HUB)
LN418-337 3 x 3 x 3 x 1-1/2 x 1-1/2"	LN418-338 3 x 3 x 3 x 2 x 2"	LN418-420 4"×4"×4"×2"×2"
SEWER & DRAIN ADAPTER (HUBxHUB)
LN117-422 4×3"	LN117-342 3 x 4"
SLIP PLUG (SPG)
LN110S-015 1-1/2"	LN110S-020 2"	LN110S-025 2-1/2"	LN110S-030 3"
LN110S-035 3-1/2"	LN110S-040 4"
STREET SANITARY TEE (SPG×HUB×HUB)
LN403-015 1-1/2"	LN403-020 2"	LN403-030 3"	LN403-040 4"
TEST TEE (HUBxHUBxFIPT)
LN445-015 1 -1/2"	LN445-015L 1 -1/2"	LN445-020 2"	LN445-020L 2"
LN445-030 3"	LN445-030L 3"	LN445-040 4"	LN445-040L 4"
LN445-427 4×3×4"
TEST TEE (HUB×HUB×CLEANOUT W/PLUG)
LN444X-427 4×3×4"	LN444X-015L 4×3×4"	LN444X-015 4×3×4"	LN444X-020L 4×3×4"
LN444X-020 4×3×4"	LN444X-030L 4×3×4"	LN444X-030 4×3×4"	LN444X-040L 4×3×4"
LN444X-040 4×3×4"
THREADED CAP (FIPT)
LN135-015 1-1/2"	LN135-020 2"	LN135-030 3"
TRAP ADAPTER (HUB x SJ)
LN104-012 1-1/4"	LN104-015 1-1/2"	LN104-020 2"	LN104-212 1-1/2" X 1-1/4"
TRAP ADAPTER (SPGXSJ)
LN103-012 1-1/4"	LN103-015 1-1/2"	LN103-020 2"	LN103-212 1-1/2" X 1-1/4"
TRAP ADAPTER W/ PLASTIC NUT & WASHER (HUB×SJ)
LN104X-012 1-1/4"	LN104X-015 1-1/2"	LN104X-020 2"	LN104X-212 1-1/2×1-1/4"
TRAP ADAPTER W/ PLASTIC NUT & WASHER (SPG×SJ)
LN103X-012 1-1/4"	LN103X-015 1-1/2"	LN103X-020 2"	LN103X-212 1-1/2×1-1/4"
TRAP ADAPTER W/CHROME NUT & WASHER (HUB×SJ)
LN104W-020 2"	LN104W-212 1-1/2×1-1/4"
TRAP ADAPTER W/CHROME NUT & WASHER (SPG×SJ)
LN103W-015 1-1/2"	LN103W-020 2"	LN103W-212 1-1/2×1-1/4"
TRAP ADAPTER W/PLASTIC NUT (HUB×SJ)
LN104P-012 1-1/4"	LN104P-015 1-1/2"	LN104P-212 1-1/2×1-1/4"
TRAP ADAPTER W/PLASTIC NUT (SPG×SJ)
LN103P-012 1-1/4"	LN103P-015 1-1/2"	LN103P-212 1-1/2×1-1/4"
TRAY PLUG ADAPTER
LN900-015 1-1/2"
TRAY PLUG ADAPTER - SPIGOT
LN130X-015 1-1/2"
TWO-WAY CLEANOUT (HUB×HUB×HUB)
LN448-030 3"	LN448-040 4"
UNION (HUB×HUB)
LN126-015 1-1/2"	LN126-020 2"	LN126-030 3"	LN126-040 4"
VENT TEE (HUB×HUB×HUB)
LN441-015 1-1/2"	LN441-020 2"	LN441-030 3"	LN441-040 4"
LN441-337 3"×3"×1-1/2"	LN441-338 3"×3"×1-1/2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - Size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [3] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Fittings¢ § [2] [3] [G]	ABS	Viterra	CSA B181.1
22½° STREET ELBOW (HUB×SPG)
A326-030 3"	A326-020 2"	A326-040 4"	A326-015 1-1/2"
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [2] XXX - Size 012 - 1 1/4" 015 - 1 1/2" 020 - 2" 030 - 3" 040 - 4" 060 - 6" 080 - 8" 100 - 10" 120 - 12" 169 - 1 1/4" x 1 1/2" 212 - 1 1/2" x 1 1/4" 213 - 1 1/2" x 2" 241 - 2" × 1 1/2" × 1 1/2" or 2" × 1 1/2" × 1 1/2" × 1 1/2" 251 - 2" × 1 1/2" or 2" × 2" × 1 1/2" × 1 1/2" 253 - 2" x 3" 337 - 3" × 1 1/2" or 3" × 3" × 1 1/2" or 3" × 3" × 3" × 1 1/2" 338 - 3" × 2" or 3" × 3" × 2" or 3" × 3" × 3" × 2" 342 - 3" x 4" 415 - 4" × 4" × 1/2" 420 - 4" × 2" or 4" × 4" × 2" or 4" × 4" × 4" × 2" 422 - 4" × 3" or 4" × 4" × 3" or 4" × 4" × 4" × 3" 532 - 6" × 4" or 6" × 6" × 4" or 6" × 6" × 6" × 4" 582 - 8" × 4" or 8" × 8" × 4" or 8" × 8" × 8" × 4" 585 - 8" × 6" or 8" × 8" × 6" or 8" × 8" × 8" × 6" 626 - 10" × 6" or 10" × 10" × 6" or 10" × 10" × 10" × 6" 628 - 10" × 8" or 10" × 10" × 8" or 10" × 10" × 10" × 8" 670 - 12" × 10" or 12" × 12" × 10" or 12" × 12" × 12" × 10" [3] Figure numbers may have the following prefix used to identify retail packaging requirements: R [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.

# This product may be marked with an alternate trade name: Liansu.

Viterra Systems LLC
1830 Fllower Ave.
Duarte, CA 91010
United States
1-626-716-2238

Facility : Guangdong, China

Drain, Waste, and Vent - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢ [1]	ABS	Viterra	CSA B181.1
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")	LN324-020 (2")	LN324-030 (3")	LN324-040 (4")
LN324-060 (6")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")	LN326-020 (2")	LN326-030 (3")	LN326-040 (4")
45° Double Wye (All HUB)
LN611-015 (1 1/2")	LN611-020 (2")	LN611-030 (3")	LN611-030L (3")
LN611-040 (4")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")	LN321-015 (1 1/2")	LN321-020L (2")	LN321-030L (3")
LN321-040 (4")	LN321-060 (6")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")	LN321-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")	LN321-020S (2")	LN321-030S (3")	LN321-040S (4")
45° Reducing Double Wye (All HUB)
LN612-251 (2" x 2" x 1 1/2" x 1 1/2")	LN612-337 (3" x 3" x 1 1/2" x 1 1/2")	LN612-338 (3" x 3" x 2" x 2")	LN612-420 (4" x 4" x 2" x 2")
LN612-422 (4" x 4" x 3" x 3")	LN612-532 (6" x 6" x 4" x 4")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")	LN603-337 (3" x 3" x 1 1/2")	LN603-338 (3" x 3" x 2")	LN603-420 (4" x 4" x 2")
LN603-422 (4" x 4" x 3")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")	LN601-337L (3" x 3" x 1 1/2")	LN601-338L (3" x 3" x 2")	LN601-419 (4" x 4" x 1 1/2")
LN601-420L (4" x 4" x 2")	LN601-422L (4" x 4" x 3")	LN601-530 (6" x 6" x 3")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")	LN323-015 (1 1/2")	LN323-020L (2")	LN323-030L (3")
LN323-040 (4")	LN323-060 (6")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")	LN323-030 (3")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")	LN323-020S (2")	LN323-030S (3")	LN323-040S (4")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")	LN602-020 (2")	LN602-030 (3")	LN602-040 (4")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")	LN600-015 (1 1/2")	LN600-015L (1 1/2")	LN600-020 (2")
LN600-020L (2")	LN600-030 (3")	LN600-030L (3")	LN600-040 (4")
LN600-040L (4")	LN600-060 (6")	LN601-241 (2" x 1 1/2" x 1 1/2")	LN601-251 (2" x 2" x 1 1/2")
LN601-337 (3" x 3" x 1 1/2")	LN601-338 (3" x 3" x 2")	LN601-420 (4"x 4" x 2")	LN601-422 (4" x 4" x 3")
LN601-532 (6" x 6" x 4")
60° Elbow (HUB x HUB)
LN319-015 (1 1/2")	LN319-040 (4")	LN319-030 (3")	LN319-020 (2")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")	LN320-020 (2")	LN320-030 (3")	LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")	LN327-020 (2")	LN327-030 (3")	LN327-040 (4")
LN327-241 (2" x 1 1/2" x 1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")	LN300-015 (1 1/2")	LN300-020 (2")	LN300-030 (3")
LN300-040 (4")	LN300-060 (6")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")	LN303-338 (3" x 3" x 2")	LN303-420 (4" x 4" x 2")
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")	LN300S-338 (3" x 3" x 2")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")	LN300-015S (1 1/2")	LN300-020S (2")	LN300-030S (3")
LN300-040S (4")	LN300-060S (6")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")	LN304-015 (1 1/2")	LN304-020 (2")	LN304-030 (3")
LN304-040 (4")
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-015 (1 1/2")	LN309-020 (2")	LN309-030 (3")	LN309-040 (4")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Reducing Closet St. Elbow w/ Test Cap(HUBxSpg)
LN330X-342 (3" x 4")	LN330X-422 (4" x 3")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")	LN330-422 (4" x 3")
90° Street Elbow (HUB x Spg)
LN302-012 (1 1/4")	LN302-015 (1 1/2")	LN302-020 (2")	LN302-030 (3")
LN302-040 (4")	LN302-060 (6")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")	LN302-020S (2")	LN302-030S (3")	LN302-040S (4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")	LN331-015 (1 1/2")	LN331-020 (2")	LN331-030 (3")
LN331-040 (4")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")	LN120-212 (1 1/2" x 1 1/4")
Adapter Bushing (DWV Spg x S&D HUB)
LN118-030 (3")	LN118-040 (4")
Cap (FIPT)
LN116F-015 (1 1/2")
Cap (HUB)
LN116-012 (1 1/4")	LN116-015 (1 1/2")	LN116-020 (2")	LN116-030 (3")
LN116-040 (4")	LN116-060 (6")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spg x HUB)
LN124-020 (2")	LN124-040 (4")	LN124-422 (4" x 3")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")	LN105-015 (1 1/2")	LN105-020 (2")	LN105-030 (3")
LN105-040 (4")	LN105-060 (6")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")	LN105X-015 (1 1/2")	LN105X-020 (2")	LN105X-030 (3")
LN105X-040 (4")	LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")	LN106-015 (1 1/2")	LN106-020 (2")	LN106-025 (2 1/2")
LN106-030 (3")	LN106-035 (3 1/2")	LN106-040 (4")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
Closet Flange (FIPT)
LN830-422 (4 x 3")
Closet Flange (HUB)
LN800-040 (4" x 4")	LN800-422 (4" x 3")	LN800-422L (4" x 3")
Closet Flange (MIPT)
LN831-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (H)!
LN811-040 (4")	LN811-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-040 (4")	LN812-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")	LN810P-040 (4" x 4")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-040 (4" x 4")	LN812P-422 (4" x 3")
Closet Flange w/ Knockout & Pipe Stop (HUB)
LN815K-040 (4" x 4"/ 4" x 3")
Closet Flange w/ Knockout Test Plug (Hub)
LN800T-040 (4" x 4")	LN800T-422 (4" x 3")	LN800T-422L (4" x 3")
Closet Flange w/ Pipe Stop (HUB)
LN815PS-040 (4" x 4" / 4" x 3")
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-040 (4" x 4")	LN800R-422 (4" x 3")	LN800R-422L (4" x 3")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-040C (4")	LN800T-422C (4" x 3")	LN800T-422CL (4" x 3")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring*
LN820P-422 (4" x 3")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-015 (1 1/2")	LN501-020 (2")	LN501-030 (3")	LN501-040 (4")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")	LN106C-020 (2")	LN106C-030 (3")	LN106C-040 (4")
Coupling (HUB x HUB)
LN100-012 (1 1/4")	LN100-015 (1 1/2")	LN100-020 (2")	LN100-030 (3")
LN100-040 (4")	LN100-060 (6")
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")	LN601-210 (1-1/2" × 1-1/2" × 3/4")
Double Fixture Fitting (All HUB)
LN500-020 (2")	LN500-030 (3")	LN500-241 (2" x 1 1/2" x 1 1/2" x 1-1/2")	LN500-251 (2" x 2" x 1 1/2" x 1 1/2")
LN500-257 (2" x 1 1/2" x 2" x 2")	LN500-338 (3" x 2" x 3" x 3")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")	LN428-020 (2")	LN428-030 (3")	LN428-040 (4")
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Double Sanitary Tee w/ R & L Side Inlet (All HUB)
LN439-338 (3" x 3" x 3" x "3 x 2" x 2")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-337 (3" x 3" x 3" x 3" x1 1/ 2")	LN438-338 (3" x 3" x 3" x 3" x 2")	LN438-420 (4" x 4" x 4" x 4" x 2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
Expansion Joint (HUB x HUB)
LNH119-015 (1 1/2")	LNH119-020 (2")	LNH119-030 (3")	LNH119-040 (4")
Expansion Joint (HUB x Spg)
LNH119S-030 (3")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")	LN101-015 (1 1/2")	LN101-020 (2")	LN101-030 (3")
LN101-040 (4")	LN101-060 (6")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")	LN108-210 (1 1/2" x 3/4")	LN108-212 (1 1/2" x 1 1/4")	LN108-251 (2" x 1 1/2")
LN108-337 (3" x 1 1/2")	LN108-338 (3" x 2")	LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")	LN107-251 (2" x 1 1/2")	LN107-337 (3" x 1 1/2")	LN107-338 (3" x 2")
LN107-419 (4" x 1 1/2")	LN107-420 (4" x 2")	LN107-422 (4" x 3")	LN107-532 (6" x 4")
Flush C.O. Plug (MPT)
LN110-020 (2")	LN110-030 (3")	LN110-040 (4")
Flush Closet Flange (Inside 4", Outside 3")
LN815-040 (4" x 4" / 4" x 3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")	LN123-030 (3")	LN123-040 (4")
Hub Adapter Cast Iron Increaser (HUBx SJ)
LN123R-213 (1 1/2" x 2")	LN123R-342 (3" x 4")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")	LN711M-212 (1 1/2" x 1 1/4")
Male Adapter (HUB x MIPT)
LN109-015 (1 1/2")	LN109-020 (2")	LN109-030 (3")	LN109-040 (4")
LN109-012 (1 1/4")	LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")	LN111-015 (1 1/2")	LN111-020 (2")	LN111-030 (3")
LN111-040 (4")	LN111-212 (1 1/2" x 1 1/4")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")	LN119-030 (3")	LN119-040 (4")	LN119-251 (2" x 1 1/2")
LN119-422 (4" x 3")
Offset Closet Flange,w/ Adjustable Metal Ring (H)
LN820-040 (4")	LN820-422 (4" x 3")
P-Trap (Hub x Hub x Cleanout)
LN707X-015 (1 1/2")	LN707X-020 (2")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")	LN706X-020 (2")	LN706X-030 (3")	LN706X-040 (4")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")	LN708P-015 (1 1/2")	LN708P-020 (2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")	LN102-251 (2" x 1 1/2")	LN102-337 (3" x 1-1/2")	LN102-338 (3" x 2")
LN102-419 (4" x 1 1/2")	LN102-420L (4" x 2")	LN102-422L (4" x 3")
Pivoting P-Trap w/ Plug (HUB×HUB×CLEANOUT W/PLUG)
LN707S-015 1 1/2"
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")	LN106R-015 (1 1/2")	LN106R-020 (2")	LN106R-025 (2 1/2")
LN106R-030 (3")	LN106R-035 (2 1/2")	LN106R-040 (4")	LN106R-060 (6")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")	LN502-251 (2" x 2" x 1 1/2")	LN502-257 (2" x 1 1/2" x 2")	LN502-337 (3" x 3" x 1 1/2")
LN502-338 (3" x 3" x 2")	LN502-420 (4" x 4" x 2")	LN502-422 (4" x 4" x 3")
Reducing Closet Flange (Spg)
LN801-422 (4" x 3")
Reducing Coupling (HUB x HUB)
LN102-420 (4" x 2")	LN102-422 (4" x 3")
Reducing Double Sanitary Tee (All HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")	LN429-323 (3" x 3" x 2" x 1 1/2")	LN429-337 (3" x 3" x 1 1/2" x 1 1/2")	LN429-338 (3" x 3" x 2" x 2")
LN429-420 (4" x 4" x 2" x 2")	LN429-422 (4" x 4" x 3" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")	LN401-222 (1 1/2" x 1 1/4" x 1 1/4")	LN401-225 (11/2" x 1 1/4" x 1 1/2")	LN401-241L (2" x 1 1/2" x 1 1/2")
LN401-251L (2" x 2" x 1 1/2")	LN401-257L (2" x 1 1/2" x 2")	LN401-337 (3" x 3" x 1 1/2")	LN401-338L (3" x 3" x 2")
LN401-419 (4" x 4" x 1 1/2")	LN401-420 (4" x 4" x 2")	LN401-422 (4" x 4" x 3")	LN401-532 (6" x 6" x 4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-337 (3" x 3" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-251 (2" x 2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-257 (2" x 1 1/2" x 2")	LN404-338 (3" x 3" x 2")
Reducing Vent Tee (HUB x HUB x HUB)
LN441-337 (3" x 3" x 1 1/2")	LN441-338 (3" x 3" x 2")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")	LN130-020 (2")	LN130-030 (3")	LN130-040 (4")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")	LN400-012L (1 1/4")	LN400-015 (1 1/2")	LN400-015L (1 1/2")
LN400-020 (2")	LN400-020L (2")	LN400-030 (3")	LN400-040 (4")
LN400-040L (4")	LN400-060 (6")	LN401-241 (2" x 1 1/2" x 1 1/2")	LN401-251 (2" x 2" x 1 1/2")
LN401-257 (2" x 1 1/2" x 2")	LN401-338 (3" x 3" x 2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-329 (3" x 3" x 2" x 2")	LN416-337 (3" x 3" x 3" x 1 1/2")	LN416-338 (3" x 3" x 3" x 2")	LN416-420 (4" x 4" x 4" x 2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-329 (3" x 3" x 2" x 2")	LN417-337 (3" x 3" x 3" x 1 1/2")	LN417-338 (3" x 3" x 3" x 2")	LN417-420 (4" x 4" x 4" x 2")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")	LN418-338 (3" x 3" x 3" x 2" x 2")	LN418-420 (4" x 4" x 4" x 2" x 2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")	LN117S-422 (4" x 3")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Slip Plug (Spg)
LN110S-015 (1 1/2")	LN110S-020 (2")	LN110S-025 (2 1/2")	LN110S-030 (3")
LN110S-035 (3 1/2")	LN110S-040 (4")
Snap-In Cleanout w/ Plug
LN106W-040 (4")	LN106W-030 (3")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")	LN403-020 (2")	LN403-030 (3")	LN403-040 (4")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")	LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")	LN444X-020L (2")	LN444X-030L (3")	LN444X-040L (4")
LN444X-427 (4"x 3" x 4")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")	LN444X-020 (2")	LN444X-030 (3")	LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")	LN445-015L (1 1/2")	LN445-020 (2")	LN445-020L (2")
LN445-030 (3")	LN445-030L (3")	LN445-040 (4")	LN445-040L (4")
LN445-427 (4" x 3" x 4")
Threaded Cap (FIPT)
LN135-015 (1 1/2")	LN135-020 (2")	LN135-030 (3")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")	LN103X-015 (1 1/2")	LN103X-020 (2")	LN103X-212 (1 1/2" x 1-1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")	LN104W-020 (2")	LN104C-212 (1 1/2" x 1 1/4")	LN104W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103W-015 (1 1/2")	LN103C-020 (2")	LN103W-020 (2")	LN103C-212 (1 1/2 x 1 1/4")
LN103W-212 (1 1/2 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-012 (1 1/4")	LN104X-015 (1 1/2")	LN104X-020 (2")	LN104X-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-012 (1 1/4")	LN104P-015 (1 1/2")	LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")	LN103P-015 (1 1/2")	LN103P-212 (1 1/2" x 1 1/4")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Tray Plug Adapter (Spigot x Female NPSM)
LN113-015 (1 1/2")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")	LN900-015 (1 1/2")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-040 (4")	LN448-030 (3")
Union (HUB x HUB)
LN126-015 (1 1/2")	LN126-020 (2")	LN126-030 (3")	LN126-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")	LN441-020 (2")	LN441-030 (3")	LN441-040 (4")
! Epoxy coated * 1 1/2" Offset ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings¢ [1]	ABS	Viterra	CSA B181.1
22 1/2° Street Elbow (HUB x Spg)
A326-015 (1 1/2")	A326-040 (4")	A326-030 (3")	A326-020 (2")
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.

Reclaimed Water - Pipe and Fittings

Product Type	Material Type	Trade Name	Product Standard
Fittings¢ [1]	ABS	Viterra	CSA B181.1
22 1/2° Elbow (HUB x HUB)
LN324-015 (1 1/2")	LN324-020 (2")	LN324-030 (3")	LN324-040 (4")
LN324-060 (6")
22 1/2° Street Elbow (HUB x Spg)
LN326-015 (1 1/2")	LN326-020 (2")	LN326-030 (3")	LN326-040 (4")
45° Double Wye (All HUB)
LN611-015 (1 1/2")	LN611-020 (2")	LN611-030 (3")	LN611-030L (3")
LN611-040 (4")
45° Elbow (HUB x HUB)
LN321-012 (1 1/4")	LN321-015 (1 1/2")	LN321-020L (2")	LN321-030L (3")
LN321-040 (4")	LN321-060 (6")
45° Elbow Long-Turn (HUB x HUB)
LN321-020 (2")	LN321-030 (3")
45° Elbow-Short Turn (HUB x HUB)
LN321-015S (1 1/2")	LN321-020S (2")	LN321-030S (3")	LN321-040S (4")
45° Reducing Double Wye (All HUB)
LN612-251 (2" x 2" x 1 1/2" x 1 1/2")	LN612-337 (3" x 3" x 1 1/2" x 1 1/2")	LN612-338 (3" x 3" x 2" x 2")	LN612-420 (4" x 4" x 2" x 2")
LN612-422 (4" x 4" x 3" x 3")	LN612-532 (6" x 6" x 4" x 4")
45° Reducing Street Wye (Spg x HUB x HUB)
LN603-251 (2" x 2" x 1 1/2")	LN603-337 (3" x 3" x 1 1/2")	LN603-338 (3" x 3" x 2")	LN603-420 (4" x 4" x 2")
LN603-422 (4" x 4" x 3")
45° Reducing Wye (HUB x HUB x HUB)
LN601-251L (2" x 2" x 1 1/2")	LN601-337L (3" x 3" x 1 1/2")	LN601-338L (3" x 3" x 2")	LN601-419 (4" x 4" x 1 1/2")
LN601-420L (4" x 4" x 2")	LN601-422L (4" x 4" x 3")	LN601-530 (6" x 6" x 3")
45° Street Elbow (HUB x Spg)
LN323-012 (1 1/4")	LN323-015 (1 1/2")	LN323-020L (2")	LN323-030L (3")
LN323-040 (4")	LN323-060 (6")
45° Street Elbow Long-Turn (HUB x Spg)
LN323-020 (2")	LN323-030 (3")
45° Street Elbow-Short Turn (HUB x Spg)
LN323-015S (1 1/2")	LN323-020S (2")	LN323-030S (3")	LN323-040S (4")
45° Street Wye (Spg x HUB x HUB)
LN602-015 (1 1/2")	LN602-020 (2")	LN602-030 (3")	LN602-040 (4")
45° Wye (HUB x HUB x HUB)
LN600-012 (1 1/4")	LN600-015 (1 1/2")	LN600-015L (1 1/2")	LN600-020 (2")
LN600-020L (2")	LN600-030 (3")	LN600-030L (3")	LN600-040 (4")
LN600-040L (4")	LN600-060 (6")	LN601-241 (2" x 1 1/2" x 1 1/2")	LN601-251 (2" x 2" x 1 1/2")
LN601-337 (3" x 3" x 1 1/2")	LN601-338 (3" x 3" x 2")	LN601-420 (4"x 4" x 2")	LN601-422 (4" x 4" x 3")
LN601-532 (6" x 6" x 4")
60° Elbow (HUB x HUB)
LN319-030 (3")	LN319-020 (2")	LN319-015 (1 1/2")	LN319-040 (4")
60° Street Elbow (HUB x Spg)
LN320-015 (1 1/2")	LN320-020 (2")	LN320-030 (3")	LN320-040 (4")
90° Double Elbow (HUB x HUB x HUB)
LN327-015 (1 1/2")	LN327-020 (2")	LN327-030 (3")	LN327-040 (4")
LN327-241 (2" x 1 1/2" x 1 1/2")
90° Elbow (HUB x HUB)
LN300-012 (1 1/4")	LN300-015 (1 1/2")	LN300-020 (2")	LN300-030 (3")
LN300-040 (4")	LN300-060 (6")
90° Elbow w/ Low Heel Inlet (HUB x HUB x HUB)
LN303-337 (3" x 3" x 1 1/2")	LN303-338 (3" x 3" x 2")	LN303-420 (4" x 4" x 2")
90° Elbow w/ Side Inlet (HUB x HUB x HUB)
LN300S-337 (3" x 3" x 1 1/2")	LN300S-338 (3" x 3" x 2")
90° Elbow-Short Turn (HUB x HUB)
LN300-012S (1 1/4")	LN300-015S (1 1/2")	LN300-020S (2")	LN300-030S (3")
LN300-040S (4")	LN300-060S (6")
90° Long Sweep Elbow (HUB x HUB)
LN304-012 (1 1/4")	LN304-015 (1 1/2")	LN304-020 (2")	LN304-030 (3")
LN304-040 (4")
90° Long Sweep Elbow, Street (HUB x SPG)
LN309-015 (1 1/2")	LN309-020 (2")	LN309-030 (3")	LN309-040 (4")
90° Reducing Closet Elbow (HUB x HUB)
LN329-422 (4" x 3")
90° Reducing Closet St. Elbow w/ Test Cap(HUBxSpg)
LN330X-342 (3" x 4")	LN330X-422 (4" x 3")
90° Reducing Closet Street Elbow (HUB x Spg)
LN330-342 (3" x 4")	LN330-422 (4" x 3")
90° Street Elbow (HUB x Spg)
LN302-012 (1 1/4")	LN302-015 (1 1/2")	LN302-020 (2")	LN302-030 (3")
LN302-040 (4")	LN302-060 (6")
90° Street Elbow w/Low Heel Inlet (HUBxSpgxHUB)
LN310-338 (3" x 3" x 2")
90° Street Elbow-Short Turn (HUB x Spg)
LN302-015S (1 1/2")	LN302-020S (2")	LN302-030S (3")	LN302-040S (4")
90° Vent Elbow (HUB x HUB)
LN331-012 (1 1/4")	LN331-015 (1 1/2")	LN331-020 (2")	LN331-030 (3")
LN331-040 (4")
ABS-Copper Adapter (HUB x SJ)
LN120-015 (1 1/2")	LN120-212 (1 1/2" x 1 1/4")
Adapter Bushing (DWV Spg x S&D HUB)
LN118-030 (3")	LN118-040 (4")
Cap (FIPT)
LN116F-015 (1 1/2")
Cap (HUB)
LN116-012 (1 1/4")	LN116-015 (1 1/2")	LN116-020 (2")	LN116-030 (3")
LN116-040 (4")	LN116-060 (6")
Cast Iron Adapter (HUB x HUB)
LN125-040 (4")
Cast Iron HUB Adapter (Spg x HUB)
LN124-020 (2")	LN124-040 (4")	LN124-422 (4" x 3")
Cleanout Adapter (Spg x FIPT)
LN105-012 (1 1/4")	LN105-015 (1 1/2")	LN105-020 (2")	LN105-030 (3")
LN105-040 (4")	LN105-060 (6")
Cleanout Adapter w/ Plug (Spg x Cleanout w/ Plug)
LN105X-012 (1 1/4")	LN105X-015 (1 1/2")	LN105X-020 (2")	LN105X-030 (3")
LN105X-040 (4")	LN105X-060 (6")
Cleanout Plug (MIPT)
LN106-012 (1 1/4")	LN106-015 (1 1/2")	LN106-020 (2")	LN106-025 (2 1/2")
LN106-030 (3")	LN106-035 (3 1/2")	LN106-040 (4")
Cleanout Wye (HUB x HUB x FIPT)
LN604-015 (1 1/2")
Closet Flange (FIPT)
LN830-422 (4 x 3")
Closet Flange (HUB)
LN800-040 (4" x 4")	LN800-422 (4" x 3")	LN800-422L (4" x 3")
Closet Flange (MIPT)
LN831-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (H)!
LN811-040 (4")	LN811-422 (4" x 3")
Closet Flange w/ Adjustable Metal Ring (S)!
LN812-040 (4")	LN812-422 (4" x 3")
Closet Flange w/ Adjustable Plastic Ring (HUB)
LN810P-422 (4" × 3")	LN810P-040 (4" x 4")
Closet Flange w/ Adjustable Plastic Ring (Spg)
LN812P-040 (4" x 4")	LN812P-422 (4" x 3")
Closet Flange w/ Knockout & Pipe Stop (HUB)
LN815K-040 (4" x 4"/ 4" x 3")
Closet Flange w/ Knockout Test Plug (Hub)
LN800T-040 (4" x 4")	LN800T-422 (4" x 3")	LN800T-422L (4" x 3")
Closet Flange w/ Pipe Stop (HUB)
LN815PS-040 (4" x 4" / 4" x 3")
Closet Flange w/ Ring-Pull Test Plug (HUB)
LN800R-040 (4" x 4")	LN800R-422 (4" x 3")	LN800R-422L (4" x 3")
Closet Flange w/ Screw Test Plug (HUB)
LN800T-040C (4")	LN800T-422C (4" x 3")	LN800T-422CL (4" x 3")
Closet Flange, w/ Adjustable w/ PVC Plastic Ring*
LN820P-422 (4" x 3")
Combination Wye & 1/8 Bend (1 Piece)(HUBxHUBxHUB)
LN501-015 (1 1/2")	LN501-020 (2")	LN501-030 (3")	LN501-040 (4")
Combination Wye & 1/8 Bend(Two Piece)(HUBxHUBxHUB)
LN503-020 (2")
Counter Sunk Plug (MIPT)
LN106C-015 (1 1/2")	LN106C-020 (2")	LN106C-030 (3")	LN106C-040 (4")
Coupling (HUB x HUB)
LN100-012 (1 1/4")	LN100-015 (1 1/2")	LN100-020 (2")	LN100-030 (3")
LN100-040 (4")	LN100-060 (6")
Dishwasher Adapter (Sp×Barb)
LN610-015 (1-1/2")
Dishwasher Y (Hub)
LN601-209 (1-1/2" × 1-1/2" × 1/2")	LN601-210 (1-1/2" × 1-1/2" × 3/4")
Double Fixture Fitting (All HUB)
LN500-020 (2")	LN500-030 (3")	LN500-241 (2" x 1 1/2" x 1 1/2" x 1-1/2")	LN500-251 (2" x 2" x 1 1/2" x 1 1/2")
LN500-257 (2" x 1 1/2" x 2" x 2")	LN500-338 (3" x 2" x 3" x 3")
Double Sanitary Tee (All HUB)
LN428-015 (1 1/2")	LN428-020 (2")	LN428-030 (3")	LN428-040 (4")
LN429-337 (3" x 3" x 1 1/2" x 1 1/2")
Double Sanitary Tee w/ R & L Side Inlet (All HUB)
LN439-338 (3" x 3" x 3" x "3 x 2" x 2")
Double Sanitary Tee w/ Side Inlet (All HUB)
LN438-337 (3" x 3" x 3" x 3" x1 1/ 2")	LN438-338 (3" x 3" x 3" x 3" x 2")	LN438-420 (4" x 4" x 4" x 4" x 2")
Drum Trap w/ Cleanout
LN702X-363 (3" x 6" x 1 1/2")
Expansion Joint (HUB x HUB)
LNH119-015 (1 1/2")	LNH119-020 (2")	LNH119-030 (3")	LNH119-040 (4")
Expansion Joint (HUB x Spg)
LNH119S-030 (3")
Female Adapter (HUB x FIPT)
LN101-012 (1 1/4")	LN101-015 (1 1/2")	LN101-020 (2")	LN101-030 (3")
LN101-040 (4")	LN101-060 (6")
Flush Adapter (Spg x FIPT)
LN108-209 (1 1/2" x 1/2")	LN108-210 (1 1/2" x 3/4")	LN108-212 (1 1/2" x 1 1/4")	LN108-251 (2" x 1 1/2")
LN108-337 (3" x 1 1/2")	LN108-338 (3" x 2")	LN108-422 (4" x 3")
Flush Bushing (Spg x HUB)
LN107-212 (1 1/2" x 1 1/4")	LN107-251 (2" x 1 1/2")	LN107-337 (3" x 1 1/2")	LN107-338 (3" x 2")
LN107-419 (4" x 1 1/2")	LN107-420 (4" x 2")	LN107-422 (4" x 3")	LN107-532 (6" x 4")
Flush C.O. Plug (MPT)
LN110-020 (2")	LN110-030 (3")	LN110-040 (4")
Flush Closet Flange (Inside 4", Outside 3")
LN815-040 (4" x 4" / 4" x 3")
Hub Adapter Cast Iron (HUB x SJ)
LN123-020 (2")	LN123-030 (3")	LN123-040 (4")
Hub Adapter Cast Iron Increaser (HUBx SJ)
LN123R-213 (1 1/2" x 2")	LN123R-342 (3" x 4")
LA Pattern P-Trap w/Union & Plastic Nut (HUB x SJ)
LN711M-015 (1 1/2")	LN711M-212 (1 1/2" x 1 1/4")
Male Adapter (HUB x MIPT)
LN109-015 (1 1/2")	LN109-020 (2")	LN109-030 (3")	LN109-040 (4")
LN109-012 (1 1/4")	LN109-212 (1 1/2" x 1 1/4")
Male Adapter (Spg x MIPT)
LN111-012 (1 1/4")	LN111-015 (1 1/2")	LN111-020 (2")	LN111-030 (3")
LN111-040 (4")	LN111-212 (1 1/2" x 1 1/4")
No-Hub Adapter (Spg x HUB)
LN119-020 (2")	LN119-030 (3")	LN119-040 (4")	LN119-251 (2" x 1 1/2")
LN119-422 (4" x 3")
Offset Closet Flange,w/ Adjustable Metal Ring (H)
LN820-040 (4")	LN820-422 (4" x 3")
P-Trap (Hub x Hub x Cleanout)
LN707X-015 (1 1/2")	LN707X-020 (2")
P-Trap (Hub x Hub)
LN706X-015 (1 1/2")	LN706X-020 (2")	LN706X-030 (3")	LN706X-040 (4")
P-Trap w/ Union & C/O (Hub x Hub x C/O)
LN712-015 (1 1/2")
P-Trap w/ Union Joint (Hub x Hub)
LN708P-012 (1 1/4")	LN708P-015 (1 1/2")	LN708P-020 (2")
Pipe Increaser-Reducer (HUB x HUB)
LN102-212 (1 1/2" x 1 1/4")	LN102-251 (2" x 1 1/2")	LN102-337 (3" x 1-1/2")	LN102-338 (3" x 2")
LN102-419 (4" x 1 1/2")	LN102-420L (4" x 2")	LN102-422L (4" x 3")
Pivoting P-Trap w/ Plug (HUB×HUB×CLEANOUT W/PLUG)
LN707S-015 1 1/2"
Plug with Gasket (MIPT)
LN106R-012 (1 1/4")	LN106R-015 (1 1/2")	LN106R-020 (2")	LN106R-025 (2 1/2")
LN106R-030 (3")	LN106R-035 (2 1/2")	LN106R-040 (4")	LN106R-060 (6")
Red. Comb. Wye & 1/8 Bend(1 Piece)(HUBxHUBxHUB)
LN502-241 (2" x 1 1/2" x 1 1/2")	LN502-251 (2" x 2" x 1 1/2")	LN502-257 (2" x 1 1/2" x 2")	LN502-337 (3" x 3" x 1 1/2")
LN502-338 (3" x 3" x 2")	LN502-420 (4" x 4" x 2")	LN502-422 (4" x 4" x 3")
Reducing Closet Flange (Spg)
LN801-422 (4" x 3")
Reducing Coupling (HUB x HUB)
LN102-420 (4" x 2")	LN102-422 (4" x 3")
Reducing Double Sanitary Tee (All HUB)
LN429-251 (2" x 2" x 1 1/2" x 1 1/2")	LN429-323 (3" x 3" x 2" x 1 1/2")	LN429-337 (3" x 3" x 1 1/2" x 1 1/2")	LN429-338 (3" x 3" x 2" x 2")
LN429-420 (4" x 4" x 2" x 2")	LN429-422 (4" x 4" x 3" x 3")
Reducing Sanitary Tee (HUB x HUB x HUB)
LN401-212 (1 1/2" x 1 1/2" x 1 1/4")	LN401-222 (1 1/2" x 1 1/4" x 1 1/4")	LN401-225 (11/2" x 1 1/4" x 1 1/2")	LN401-241L (2" x 1 1/2" x 1 1/2")
LN401-251L (2" x 2" x 1 1/2")	LN401-257L (2" x 1 1/2" x 2")	LN401-337 (3" x 3" x 1 1/2")	LN401-338L (3" x 3" x 2")
LN401-419 (4" x 4" x 1 1/2")	LN401-420 (4" x 4" x 2")	LN401-422 (4" x 4" x 3")	LN401-532 (6" x 6" x 4")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-241 (2" x 1 1/2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-251 (2" x 2" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-337 (3" x 3" x 1 1/2")
Reducing Street Sanitary Tee (Spg x HUB x HUB)
LN404-257 (2" x 1 1/2" x 2")	LN404-338 (3" x 3" x 2")
Reducing Vent Tee (HUB x HUB x HUB)
LN441-337 (3" x 3" x 1 1/2")	LN441-338 (3" x 3" x 2")
Repair Coupling (HUB x HUB)
LN130-015 (1 1/2")	LN130-020 (2")	LN130-030 (3")	LN130-040 (4")
Return Bend (Hub x Hub x Cleanout w/ Plug)
LN701-xxx (1 1/2" - 12")
Return Bend (Hub x Hub)
LN700-xxx (1 1/2" - 12")
Sanitary Tee (HUB x HUB x HUB)
LN400-012 (1 1/4")	LN400-012L (1 1/4")	LN400-015 (1 1/2")	LN400-015L (1 1/2")
LN400-020 (2")	LN400-020L (2")	LN400-030 (3")	LN400-040 (4")
LN400-040L (4")	LN400-060 (6")	LN401-241 (2" x 1 1/2" x 1 1/2")	LN401-251 (2" x 2" x 1 1/2")
LN401-257 (2" x 1 1/2" x 2")	LN401-338 (3" x 3" x 2")
Sanitary Tee w/ Left Side Inlet (All HUB)
LN416-329 (3" x 3" x 2" x 2")	LN416-337 (3" x 3" x 3" x 1 1/2")	LN416-338 (3" x 3" x 3" x 2")	LN416-420 (4" x 4" x 4" x 2")
Sanitary Tee w/ Right Side Inlet (All Hub)
LN417-329 (3" x 3" x 2" x 2")	LN417-337 (3" x 3" x 3" x 1 1/2")	LN417-338 (3" x 3" x 3" x 2")	LN417-420 (4" x 4" x 4" x 2")
Sanitary Tee with R & L Side Inlets (All HUB)
LN418-337 (3" x 3" x 3" x 1 1/2" x 1 1/2")	LN418-338 (3" x 3" x 3" x 2" x 2")	LN418-420 (4" x 4" x 4" x 2" x 2")
Sewer Drain Adapter (HUB x HUB)
LN117-422 (4" x 3")
Sewer Pipe Adapter Coupling (Sewer HUBxSCH 40 HUB)
LN117S-040 (4" x 4")	LN117S-422 (4" x 3")
Slip Joint Nut (FIPT)
LN115-015 (1 1/2")
Slip Plug (Spg)
LN110S-015 (1 1/2")	LN110S-020 (2")	LN110S-025 (2 1/2")	LN110S-030 (3")
LN110S-035 (3 1/2")	LN110S-040 (4")
Snap-In Cleanout w/ Plug
LN106W-040 (4")	LN106W-030 (3")
Street Sanitary Tee (Spg x HUB x HUB)
LN403-015 (1 1/2")	LN403-020 (2")	LN403-030 (3")	LN403-040 (4")
Swivel Tray Plug (Spg x FIPT)
LN114-015 (1 1/2")
Swivel Tray Plug Adapter (HUB x FIPT)
LN112-015 (1 1/2")	LN112-212 (1 1/2" x 1 1/4")
Test Tee (HUB x HUB x Cleanout w/ Plug)
LN444X-015L (1 1/2")	LN444X-020L (2")	LN444X-030L (3")	LN444X-040L (4")
LN444X-427 (4"x 3" x 4")
Test Tee (HUB x HUB x Cleanout)
LN444X-015 (1 1/2")	LN444X-020 (2")	LN444X-030 (3")	LN444X-040 (4")
Test Tee (HUB x HUB x FIPT)
LN445-015 (1 1/2")	LN445-015L (1 1/2")	LN445-020 (2")	LN445-020L (2")
LN445-030 (3")	LN445-030L (3")	LN445-040 (4")	LN445-040L (4")
LN445-427 (4" x 3" x 4")
Threaded Cap (FIPT)
LN135-015 (1 1/2")	LN135-020 (2")	LN135-030 (3")
Trap Adapter w/ Plastic Nut & Washer (Spg x SJ)
LN103X-012 (1 1/4")	LN103X-015 (1 1/2")	LN103X-020 (2")	LN103X-212 (1 1/2" x 1-1/4")
Trap Adapter w/ Chrome Nut & Washer (HUB x SJ)
LN104C-020 (2")	LN104W-020 (2")	LN104C-212 (1 1/2" x 1 1/4")	LN104W-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Chrome Nut & Washer (Spg x SJ)
LN103W-015 (1 1/2")	LN103C-020 (2")	LN103W-020 (2")	LN103C-212 (1 1/2 x 1 1/4")
LN103W-212 (1 1/2 1 1/4")
Trap Adapter w/ Plastic Nut & Washer (HUB x SJ)
LN104X-012 (1 1/4")	LN104X-015 (1 1/2")	LN104X-020 (2")	LN104X-212 (1 1/2 x 1 1/4")
Trap Adapter w/ Plastic Nut (HUB x SJ)
LN104P-012 (1 1/4")	LN104P-015 (1 1/2")	LN104P-212 (1 1/2" x 1 1/4")
Trap Adapter w/ Plastic Nut (Spg x SJ)
LN103P-012 (1 1/4")	LN103P-015 (1 1/2")	LN103P-212 (1 1/2" x 1 1/4")
Trap Adapter-Female (Hub x SJ) (without nut)
LN104-xxx (1 1/4" - 2")
Trap Adapter-Male (Spg x SJ) (without nut)
LN103-xxx (1 1/4" - 2")
Tray Plug Adapter (Spigot x Female NPSM)
LN113-015 (1 1/2")
Tray Plug Adapter - Spigot
LN130X-015 (1 1/2")	LN900-015 (1 1/2")
Two-Way Cleanout (HUB x HUB x HUB)
LN448-040 (4")	LN448-030 (3")
Union (HUB x HUB)
LN126-015 (1 1/2")	LN126-020 (2")	LN126-030 (3")	LN126-040 (4")
Vent Tee (HUB x HUB x HUB)
LN441-015 (1 1/2")	LN441-020 (2")	LN441-030 (3")	LN441-040 (4")
! Epoxy coated * 1 1/2" Offset ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.
Fittings¢ [1]	ABS	Viterra	CSA B181.1
22 1/2° Street Elbow (HUB x Spg)
A326-015 (1 1/2")	A326-040 (4")	A326-030 (3")	A326-020 (2")
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. [1] Figure numbers may have one of the following optional prefixes used to identify retail packaging requirements: URP, U, UTP, USP, UPP, UP, UMP, UHP, UBP, PP, MPP, RP, MRP, RLN, LN, RS, MRR, RL, CPRLN, or RLR.

Westlake Compounds LLC, a Westlake Chemical Corporation
210 Industrial Drive North
Madison, MS 39110
United States
601-206-3255
Visit this company's website

Facility : Aberdeen, MS

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type

End Use

Trade Name

Product Standard

PVC I-G1[1]

2, 5

Georgia Gulf HD 5009 White 24

CSA B181.1

^ Material cell class complies with fitting requirements of ASTM D2665.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
** Use of this material in NSF Certified product requires NSF's prior authorization.
[1] Material trade designation may or may not be followed by either an "M" or an "R":
    M - Milled/chopped pellets
    R - Round pellets

NOTE: The trade designation may or may not include "Georgia Gulf".
NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Facility : Gallman, MS

Drain, Waste, and Vent, Continuous Waste, and Sewer Materials

Material Type

End Use

Trade Name

Product Standard

PVC I-G1[1]

2, 5

Georgia Gulf HD 5009 White 24

CSA B181.1

^ Material cell class complies with fitting requirements of ASTM D2665.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
** Use of this material in NSF Certified product requires NSF's prior authorization.
[1] Material trade designation may or may not be followed by either an "M" or an "R":
    M - Milled/chopped pellets
    R - Round pellets

NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.
NOTE: The trade designation may or may not include "Georgia Gulf".

Number of matching Manufacturers is 30
Number of matching Products is 5915
Processing time was 1 seconds

NSF Product and Service Listings

Did you know?

Connect with NSF