NSF Product and Service Listings

[1] NSF Listed units are Certified for Pool & Spa end use.
[2] "C" denotes non-reverse polarity and "SM" denotes switch mode.
[3] Models with optional "C" suffix are Certified for use in Pool & Spa applications greater
    than 200 gallons.
[4] Maximum output 7.5 lbs/day
[5] Maximum output 1.17 lbs/day
[6] Maximum output 10 lbs/day
[7] Maximum output 11 lbs/day
[8] Maximum output 14 lbs/day
[9] Maximum output 15 lbs/day
[10] Maximum output 17 lbs/day
[11] Maximum output 1.87 lbs/day
[12] Maximum output 2.2 lbs/day
[13] Maximum output 2.34 lbs/day
[14] Maximum output 20 lbs/day
[15] Maximum output 22 lbs/day
[16] Maximum output 25 lbs/day
[17] Maximum output 28 lbs/day
[18] Maximum output 3 lbs/day.
[19] Maximum output 40 lbs/day
[20] Maximum output 5.0 lbs/day
[21] Maximum output 4.68 lbs/day
[22] Maximum output 6 lbs/day
[23] Maximum output 8 lbs/day
[24] Maximum output at 3500 ppm salt 1.8 lbs/day
[25] Maximum output at 5000 ppm salt 2.2 lbs/day

[1] NSF Listed units are Certified for Pool & Spa end use.
[2] Models are certified for use in Pool and Spa applications greater than 200 gallons.
[3] R Models are reverse polarity
[4] Maximum output 12 lbs/day
[5] Maximum output 120 lbs/day
[6] Maximum output 18 lbs/day
[7] Maximum output 24 lbs/day
[8] Maximum output 30 lbs/day
[9] Maximum output 36 lbs/day
[10] Maximum output 48 lbs/day
[11] Maximum output 6 lbs/day
[12] Maximum output 60 lbs/day
[13] Maximum output 72 lbs/day
[14] Maximum output 9 lbs/day
[15] Maximum output 96 lbs/day
[16] Maximum output 10 lbs/day
[17] Maximum output 20 lbs/day
[18] Maximum output 40 lbs/day
[19] Maximum output 5 lbs/day
[20] Maximum output 7.5 lbs/day
[21] Maximum output 80 lbs/day

[1] Certified for Pool and Spa/Hot Tub end use.
[2] Product has met the requirements of NSF/ANSI 50, Annex H.1: Disinfection Efficacy for
    the >= 3 log reduction of Enterococcus faecium [ATCC #6569] and Pseudomonas aeruginosa
    [ATCC #27313]. This product is intended for supplemental disinfection and should be used
    with registered or approved disinfection chemicals to impart residual concentrations in
    accordance with state and local regulations.
[3] This product has not been Certified by NSF International to the requirements of the
    National Electrical Code or electrical product safety standards.
[4] Only products bearing the NSF Mark are Certified.
[5] This is model has been tested to confirm a minimum inactivation equivalent of 3 log
    (99.9%) cryptosporidium parvum in accordance with NSF 50 and the US EPA UV DGM. Consult
    the manufacturer's Installation and Operating Instructions for the performance operating
    parameters. This product
    has also met the requirements of NSF/ANSI 50, Annex H.1:Disinfection Efficacy for the >=
    minimum of a 3 log (99.9%) reduction of Enterococcus faecium [ATCC #6569] and
    Pseudomonas aeruginosa [ATCC #27313]. This product is intended for secondary
    disinfection and should be used with registered or approved disinfection chemicals to
    impart residual concentrations in accordance with state and local regulations.