NSF Product and Service Listings

[1] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.
[2] Residential
[3] Public

[1] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.

[1] Certified for pool and spa applications.
[2] Single Speed Pumps.
[3] Pumps are not supplied with integral strainers. Strainers are to be installed during
    pump installation. 
[4] Certified for self-priming to 10 feet.

[1] Certified for pool and spa applications.
[4] Certified for self-priming to 10 feet.
[5] Models may also be followed by suffix CP.
[6] The NSF Certification of this product does not include testing to the requirements of
    vacuum release standards ASTM F2387 nor ASME A112.19.1
    7.
[7] With or without suffix S or SP.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[4] Includes pre-plumbed universal unions.

[1] Certified for pool and spa/hot tub applications.
[3] Tested for hydrostatic pressure, cyclic pressure, burst pressure, and head loss curve.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[4] Includes pre-plumbed universal unions.

[1] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.
[2] Public
[3] Residential

[1] Certified for pool and spa applications.
[2] Maximum output is .625 lbs/day, with PLC 700 cell.
[3] May include the suffix C.
[4] Maximum output is 1.25 lbs/day, with PLC 1400 cell.
[5] Maximum output is .97 lbs/day.
[6] Certified for use with the following:
    Power Pack Control Units: TRUCLEAR11P
    Electrolytic Cells: TRUCLEAR11K and TRUCLEAR11KU
    Replacement Cell Kit: R0694000
[7] Certified for use with the following:
    Power Pack Control Units: TRUCLEAR35P
    Electrolytic Cells: TRUCLEAR35K and TRUCLEAR35KU
    Replacement Cell Kit: R0694000
[8] Maximum output is 1.52 lbs/day.
[9] Certified for use with the following:
    Power Pack Control Units:  TRUCLEARPS

[1] Maximum rated pressure 50 psi.
[2] Unit is black.
[3] Where "XX" represents:
    00 - Port, without plug
    01 - Port, with plug
    02 - No Port

[1] Public
[2] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.
[3] Residential

[1] Certified for pool and spa applications.
[2] Single Speed Pumps.
[3] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[4] Certified for self-priming to 10 feet.

[1] Certified for pool and spa applications.
[4] Certified for self-priming to 10 feet.
[5] The NSF Certification of this product does not include testing to the requirements of
    vacuum release standards ASTM F2387 nor ASME A112.19.17.
[6] Models may also be followed by suffix CP.
[7] With or without suffix S or SP.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[4] Includes pre-plumbed universal unions.

[1] Certified for pool and spa/hot tub applications.
[3] Tested for hydrostatic pressure, cyclic pressure, burst pressure, and head loss curve.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[4] Includes pre-plumbed universal unions.

[1] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.

[1] Certified for pool and spa use.
[2] Maximum output is 2.5 lbs/day.
[3] Certified for use with the following:
    Power Pack Control Units:  APUREM, APURE, APUREMC, APUREC, APURECOM, APURECOMC
[4] Maximum output is .625 lbs/day.
[5] Maximum output is 1.25 lbs/day.
[6] Maximum output is .97 lbs/day.
[7] Certified for use with the following:
    Power Pack Control Units: TRUCLEAR11P
    Electrolytic Cells: TRUCLEAR11K and TRUCLEAR11KU
    Replacement Cell Kit: R0694000
[8] Certified for use with the following:
    Power Pack Control Units: TRUCLEAR35P
    Electrolytic Cells: TRUCLEAR35K and TRUCLEAR35KU
    Replacement Cell Kit: R0694000
[9] Maximum output is 1.52 lbs/day.
[10] Certified for use with the following:
     Power Pack Control Units:  TRUCLEARPS

[1] Maximum rated pressure 50 psi.
[2] Unit is black.
[3] Where "XX" represents:
    00 - Port, without plug
    01 - Port, with plug
    02 - No Port

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[4] -E Suffix is for end piped filters.
[5] -T Suffix is for top piped filters.
[18] Filter may be used in stacked tank on tank design configuration

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[6] xxxxx-050-xx-x Certification is for 50 psi max operating pressure
[19] xxxxx-050-xx-A Optional Horizontal Manway M16-FGH and Sight Glass Blind

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[5] -T Suffix is for top piped filters.
[6] xxxxx-050-xx-x Certification is for 50 psi max operating pressure
[7] xxxxx-100-xx-x Certification is for 100 psi max operating pressure

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[6] xxxxx-050-xx-x Certification is for 50 psi max operating pressure
[7] xxxxx-100-xx-x Certification is for 100 psi max operating pressure
[9] xxxxx-xxx-25-x Certification is for 2-1/2" Influent/Effluent Connections.
[10] xxxxx-xxx-30-x Certification is for 3" Influent/Effluent Connections.
[11] xxxxx-xxx-x-S Certification is for 24" Filter Bed Depth.
[12] xxxxx-xxx-x-R Certification is for 36" Filter Bed Depth.
[13] xxxxx-xxx-x-D Certification is for 48" Filter Bed Depth.
[14] xxxxx-xxx-40-x Certification is for 4" Influent/Effluent Connections.
[15] xxxxx-xxx-60-x Certification is for 6" Influent/Effluent Connections.
[16] xxxxx-xxx-80-x Certification is for 8" Influent/Effluent Connections.
[19] xxxxx-050-xx-A Optional Horizontal Manway M16-FGH and Sight Glass Blind

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[4] -E Suffix is for end piped filters.
[5] -T Suffix is for top piped filters.
[6] xxxxx-050-xx-x Certification is for 50 psi max operating pressure
[7] xxxxx-100-xx-x Certification is for 100 psi max operating pressure
[18] Filter may be used in stacked tank on tank design configuration

[1] Tanks comply with materials and structural integrity requirements of NSF/ANSI Standard
    50 only.

[1] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.

[1] Certified for pool and spa applications.
[2] Certified for self-priming to 10 feet.
[3] With or without suffix S or SP.

[1] Residential
[2] Public
[3] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.

[1] Certified for pool and spa applications.
[2] Maximum output is .625 lbs/day, with PLC 700 cell.
[3] May include the suffix C.
[4] Maximum output is 1.25 lbs/day, with PLC 1400 cell.

[1] Maximum rated pressure 50 psi.
[2] Unit is black.
[3] Where "XX" represents:
    00 - Port, without plug
    01 - Port, with plug
    02 - No Port

[1] Equalizer line is not part of the NSF-50 certification.
[2] Cover options: 255ii-XXh-XXX
    Where ii is a numerical value of 38 or 44
    Where h is a numerical value of 0, 1, 4, 7, or 9
    Where X is a numerical vale 0-9
[3] Certified for a maximum flow rate of 75 gpm. Certified for Pool and Spa end use.
[4] Where b is numerical value 0 or 2
    Where c is numerical value 0, 1, or 5
    Where d is numerical value 0, 1, 4, 5, 7, or 9
    Where e is numerical value 0, 1, or 9
    Where f is numerical value 0 or 2
    Where X is numerical value 0-9
[5] Where b is numerical value 0, 1, or 2
    Where c is numerical value 1, 2, or 3
    Where d is numerical value 0, 1, 4, 7, or 9
    Where e is numerical value 0, 1, or 9
    Where f is numerical value 0 or 1
    Where X is a numerical value -9
[6] Where a is numerical value 4 or 6
    Where b is numerical value 5 or 6
    Where c is numerical value 0, 1, or 2
    Where d is numerical value 0 ,1, 4, 7, or 9
    Where e is numerical value 0, 1, or 9
    Where X is a numerical value 0-9
[7] Skimmer models are equipped with a water bonding plate that conforms to NEC §680.26C.

[1] Certified for pool and spa/hot tub end use.
[2] Tested for hydrostatic pressure, cyclic pressure, burst pressure, head loss curve and
    differential leakage.
[3] 180 degrees
[4] 90 degrees

[1] Certified for pool and spa/hot tub end use.
[2] Tested for hydrostatic pressure, cyclic pressure, burst pressure, head loss curve and
    differential leakage.
[5] NSF Listed valves are black.

[1] Certified for pool and spa/hot tub end use.
[2] Tested for hydrostatic pressure, cyclic pressure, burst pressure, head loss curve and
    differential leakage.

[1] Certified for pool and spa/hot tub end use.
[2] Tested for hydrostatic pressure, cyclic pressure, burst pressure, head loss curve and
    differential leakage.
[5] NSF Listed valves are black.

[1] Certified for pool and spa/hot tub end use.
[2] Tested for hydrostatic pressure, cyclic pressure, burst pressure, head loss curve and
    differential leakage.
[5] NSF Listed valves are black.

[6] Listed for pool use only.

[1] Certified for pool and spa/hot tub end use.
[2] Tested for hydrostatic pressure, cyclic pressure, burst pressure, head loss curve and
    differential leakage.
[3] 180 degrees
[4] 90 degrees

[1] Certified for pool and spa/hot tub end use.
[2] Tested for hydrostatic pressure, cyclic pressure, burst pressure, head loss curve and
    differential leakage.
[5] NSF Listed valves are black.

[1] Certified for pool and spa/hot tub end use.
[2] Tested for hydrostatic pressure, cyclic pressure, burst pressure, head loss curve and
    differential leakage.

[1] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.
[2] Public
[3] Residential

[1] Certified for pool and spa applications.
[2] Single Speed Pumps.
[3] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[4] Certified for self-priming to 10 feet.

[1] Certified for pool and spa applications.
[4] Certified for self-priming to 10 feet.
[5] The NSF Certification of this product does not include testing to the requirements of
    vacuum release standards ASTM F2387 nor ASME A112.19.17.
[6] Models may also be followed by suffix CP.
[7] With or without suffix S or SP.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[4] Includes pre-plumbed universal unions.

[1] Certified for pool and spa/hot tub applications.
[3] Tested for hydrostatic pressure, cyclic pressure, burst pressure, and head loss curve.

[1] Certified for pool and spa/hot tub applications.
[2] Certified to NSF/ANSI/CAN 50 and IAPMO PS 87-2019 for health effects and performance.

[1] Certified for pool and spa/hot tub applications.
[4] Includes pre-plumbed universal unions.

[1] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.

[1] Certified for pool and spa use.
[2] Maximum output is 2.5 lbs/day.
[3] Certified for use with the following:
    Power Pack Control Units:  APUREM, APURE, APUREMC, APUREC, APURECOM, APURECOMC
[4] Maximum output is .625 lbs/day.
[5] Maximum output is 1.25 lbs/day.
[6] Maximum output is .97 lbs/day.
[7] Certified for use with the following:
    Power Pack Control Units: TRUCLEAR11P
    Electrolytic Cells: TRUCLEAR11K and TRUCLEAR11KU
    Replacement Cell Kit: R0694000
[8] Certified for use with the following:
    Power Pack Control Units: TRUCLEAR35P
    Electrolytic Cells: TRUCLEAR35K and TRUCLEAR35KU
    Replacement Cell Kit: R0694000
[9] Maximum output is 1.52 lbs/day.
[10] Certified for use with the following:
     Power Pack Control Units:  TRUCLEARPS

[1] Maximum rated pressure 50 psi.
[2] Unit is black.
[3] Where "XX" represents:
    00 - Port, without plug
    01 - Port, with plug
    02 - No Port

[1] Certified for pool and spa applications.
[2] Certified for self-priming to 10 feet.
[3] With or without suffix S or SP.

[1] Residential
[2] Public
[3] Certified for Fresh Water / Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solution.

[1] Certified for Pool and Spa end use only.
[2] Maximum output is 0.78 lbs/day.
[3] Maximum output is 1.35 lbs/day.
[4] Maximum output is 1.88 lbs/day.

[1] This product has met the requirements of NSF 50, Level 1 for NSF/ANSI 50 Sections 13.19
    and 13.20. NSF/ANSI 50, Section 13.19 covers disinfection efficacy testing for 3-log
    (99.9%) or greater reduction of Enterococcus faecium [ATCC #6569] and Pseudomonas
    aeruginosa [ATCC #27313]. NSF/ANSI 50, Section 13.20 covers disinfection efficacy
    testing for 3-log (99.9%) or greater reduction of Cryptosporidium parvum in a single
    pass. Consult the manufacturer's Installation and Operating Instructions for the
    performance operating parameters. This product is intended for secondary disinfection
    and should be used with registered or approved disinfection chemicals to impart residual
    concentrations in accordance with state and local regulations.
[2] Model numbers are in the form (2)CD-(3)(4)
    (2) Prefix 'HE' added for 65 g/hr and 130 g/hr models.
    (3) Designates ozone generator size (ozone output in grams/hr.
    (4) Designates ozone cell type, output control, input power.  OEM specific requirements.
    Models with suffixes 'NAP' and 'NAC' have not been evaluated by NSF.

[1] Product has met the requirements of NSF/ANSI 50, Annex H.1: Disinfection Efficacy for
    the >= 3 log reduction of Enterococcus faecium [ATCC #6569] and Pseudomonas aeruginosa
    [ATCC #27313].  This product is intended for supplemental disinfection and should be
    used with registered or approved disinfection chemicals to impart residual
    concentrations in accordance with state and local regulations.  This product has not
    been evaluated to the cryptosporidium inactivation requirements of NSF/ANSI 50.
[2] This product has not been Certified by NSF to the requirements of the National
    Electrical Code or electrical product safety standards.

[1] Product has met the requirements of NSF/ANSI 50, Annex H.1: Disinfection Efficacy for
    the >= 3 log reduction of Enterococcus faecium [ATCC #6569] and Pseudomonas aeruginosa
    [ATCC #27313].  This product is intended for supplemental disinfection and should be
    used with registered or approved disinfection chemicals to impart residual
    concentrations in accordance with state and local regulations.  This product has not
    been evaluated to the cryptosporidium inactivation requirements of NSF/ANSI 50.
[2] This product has not been Certified by NSF to the requirements of the National
    Electrical Code or electrical product safety standards.

[1] This product is certified to the requirements of NSF/ANSI 50 using the NSF Component
    Certification Specification 16534 (Ozone UV Combo Systems).
[2] This product has met the requirements of NSF 50, supplemental disinfection efficacy for
    3-log (99.9%) or greater reduction of Enterococcus faecium [ATCC #6569] and Pseudomonas
    aeruginosa [ATCC #27313].
[3] This product has not been Certified by NSF to the requirements of the National
    Electrical Code or electrical product safety standards.
    
    [xx-x-xxx-xxDxx-xx] PLC Control, Text Display Interface
    [xx-x-xxx-xxDAx-xx] PLC Control, Text Display Interface, Analog Sensor
    [xx-x-xxx-xxDAR-xx] PLC Control, Text Display Interface, Analog Sensor, Remote
    Monitoring
    [xx-x-xxx-xxxxx-01] Standard Plumbing
    [xx-x-xxx-xxxxx-02] Booster Pump Plumbing

[1] This product is certified to the requirements of NSF/ANSI 50 using the NSF Component
    Certification Specification 16534 (Ozone UV Combo Systems).
[2] This product has met the requirements of NSF 50, supplemental disinfection efficacy for
    3-log (99.9%) or greater reduction of Enterococcus faecium [ATCC #6569] and Pseudomonas
    aeruginosa [ATCC #27313].
[3] This product has not been Certified by NSF to the requirements of the National
    Electrical Code or electrical product safety standards.
    
    [xx-x-xxx-xxDxx-xx] PLC Control, Text Display Interface
    [xx-x-xxx-xxDAx-xx] PLC Control, Text Display Interface, Analog Sensor
    [xx-x-xxx-xxDAR-xx] PLC Control, Text Display Interface, Analog Sensor, Remote
    Monitoring
    [xx-x-xxx-xxxxx-01] Standard Plumbing
    [xx-x-xxx-xxxxx-02] Booster Pump Plumbing

[1] Complies with material health effect requirements of NSF/ANSI Standard 50.

[2] Complies with NSF/ANSI/CAN 50, health effects requirements section 4.1 and design
    pressure requirements of section 14.10.

[3] Tanks comply with materials and structural integrity requirements of NSF/ANSI Standard
    50 only.

[1] Listed for Pool, Spa, and Hot Tub applications only.
[2] Maximum Output 8.7 lbs/day.
[3] Maximum Output 3.5 lbs/day.
[4] Maximum Output 4.7 lbs/day.
[5] Maximum Output 7 lbs/day.

[1] Product has met the requirements of NSF/ANSI 50, Annex H.1: Disinfection Efficacy for
    the >= 3 log reduction of Enterococcus faecium [ATCC #6569] and Pseudomonas aeruginosa
    [ATCC #27313]. This product is intended for supplemental disinfection and should be used
    with registered or approved disinfection chemicals to impart residual concentrations in
    accordance with state and local regulations. This product has not been evaluated to the
    cryptosporidium inactivation requirements of NSF/ANSI 50.
[2] This product has not been Certified by NSF to the requirements of the National
    Electrical Code or electrical product safety standards
[3] Certification applies to "U" configurations only (i.e. top in-top out models).

[2] This product has not been Certified by NSF to the requirements of the National
    Electrical Code or electrical product safety standards
[4] This product has been tested to confirm a minimum inactivation equivalent of 3 log
    (99.9%) cryptosporidium parvum in accordance with NSF 50 and the US EPA UV DGM.  Consult
    the manufacturer's Installation and Operating Instructions for the performance operating
    parameters.  This product has met the requirements of NSF/ANSI 50, Annex H.1:
    Disinfection Efficacy for the >= minimum of a 3 log (99.9%) reduction of Enterococcus
    Faecium [ATCC #6569] and Pseudomonas aeruginosa [ATCC #27313].  This product is intended
    for secondary disinfection and should be used with registeredor approved disinfection
    chemicals to impart residual concentrations in accordance with state and local
    regulations.
[5] This unit is certified to provide a minimum reduction in chloramines from a 1.21 mg/L
    baseline to 0.54 mg/L concentration over a 12 hour combined average. This testing was
    performed via deviation 2024-037 in accordance with the test procedure and criteria in
    issue paper 50i217.

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[4] -E Suffix is for end piped filters.
[5] -T Suffix is for top piped filters.
[18] Filter may be used in stacked tank on tank design configuration

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[6] xxxxx-050-xx-x Certification is for 50 psi max operating pressure
[19] xxxxx-050-xx-A Optional Horizontal Manway M16-FGH and Sight Glass Blind

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[5] -T Suffix is for top piped filters.
[6] xxxxx-050-xx-x Certification is for 50 psi max operating pressure
[7] xxxxx-100-xx-x Certification is for 100 psi max operating pressure

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[6] xxxxx-050-xx-x Certification is for 50 psi max operating pressure
[7] xxxxx-100-xx-x Certification is for 100 psi max operating pressure
[9] xxxxx-xxx-25-x Certification is for 2-1/2" Influent/Effluent Connections.
[10] xxxxx-xxx-30-x Certification is for 3" Influent/Effluent Connections.
[11] xxxxx-xxx-x-S Certification is for 24" Filter Bed Depth.
[12] xxxxx-xxx-x-R Certification is for 36" Filter Bed Depth.
[13] xxxxx-xxx-x-D Certification is for 48" Filter Bed Depth.
[14] xxxxx-xxx-40-x Certification is for 4" Influent/Effluent Connections.
[15] xxxxx-xxx-60-x Certification is for 6" Influent/Effluent Connections.
[16] xxxxx-xxx-80-x Certification is for 8" Influent/Effluent Connections.
[19] xxxxx-050-xx-A Optional Horizontal Manway M16-FGH and Sight Glass Blind

[1] Certified for Fresh Water/Salt Water Applications with Type 1 (<1500 ppm sodium
    chloride), Type 2 (1500-6000 ppm sodium chloride), Type 3 (>6000 ppm sodium chloride)
    water solutions.
[4] -E Suffix is for end piped filters.
[5] -T Suffix is for top piped filters.
[6] xxxxx-050-xx-x Certification is for 50 psi max operating pressure
[7] xxxxx-100-xx-x Certification is for 100 psi max operating pressure
[18] Filter may be used in stacked tank on tank design configuration

[1] Tanks comply with materials and structural integrity requirements of NSF/ANSI Standard
    50 only.