NSF Product and Service Listings

[1] #### - Pump version 
    1000 - 0.19 gph at 145 psi
    1601 - 0.29 gph at 232 psi
    1002 - 0.55 gph at 145 psi
    0704 - 1.03 gph at 102 psi
    0309 - 2.38 gph at 44 psi
    0215 - 4.33 gph at 22 psi
[2] Liquid End Version 
    NP - Clear acrylic with Teflon diaphragm
[3] Gasket
    B - FPM seals
[4] $ - Dosing Head Version
    0 - No bleed valve, no valve springs
    2 - With bleed valve, no valve springs
[5] x  = Controls.
    Any codes not specifically indicated in the trade name or listing notes represent
    features that do not affect the parts of the pump in contact with the media. Any
    value(x) are acceptable for these codes.
[6] These pumps are approved for use with the following media at the maximum concentrations
    listed below. These products are evaluated by diluting the exposed water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI Standard 50:
    Hydrochloric acid (32.0%) and Sodium hypochlorite (15%).

[7] Version
    0 - Standard
[8] Logo
    0 - Standard, with logo
[9] Electrical Connection
    U - 100-230 V, ±10 %, 50/60 Hz
[10] Cable and Plug w/6ft power cord, single phase
     A - European Plug
     D - N. American Plug, 115V
[11] Relay, Pre-set to:
     0 - Without relay
     1 - 1 x changeover contact 230V-2A, fault indicating relay N/C
     4 - 2 x N/O 24V-100mA, such as 1 + pacing relay
     C - 1 x N/O 24V-100mA, such as 1+4 – 20mA output
     F - Auto degassing module (not available for version 2504)
     G - Auto degassing module + fault relay (not available for version 2504), comes with 
         panel
[12] Accessories:
     0 - Not Included (for PVDF, TT, SS)
     1 - With foot and injection valve, 5ft PVC suction tubing, 10ft PE discharging tubing
[13] Control Variants:
     0 - Manual + external 1:1 with pulse control
     3 - Manual + external with pulse control + analogue 0/4-20mA
     5 - Options 3+4 week process timer
     C - Options 3+CANopen
     R - Options 3+PROFIBUS®DP interface, M12
     Note: no Relay with PROFIBUS® version “R”
[14] Metering Monitor:
     0 - Pulse signal output
[15] Bluetooth Connection:
     0 - Not included
     B - Included
[16] Language
     EN - Standard

[17] Certified for Pools and Spas.
[18] Certified for use with granulated Calcium Hypochlorite.
[19] Follow the manufacturer's instructions for the installation and operation of this
     equipment. Any modifications, including the use of chemicals other than those
     recommended by the manufacturer, will void the NSF Certification.
[20] Maximum output rate 264 lbs per day of Calcium Hypochlorite.

[1] DCM 5 Series consists of DCM 500, DCM 501, DCM 502, and DCM 503.  The differences in the
    models specify the type of sensors included with that model.
    DCM 500 - ORP, pH
    DCM 501 - ORP, pH, Free Cl
    DCM 502 - ORP, pH, Free Cl, Total Cl
    DCM 503 - ORP, pH, Free Cl
[2] DCM 5 Series consists of DCM 510, DCM 511, DCM 512, DCM 513 and DCM 516.  The
    differences in the models specify the type of sensors included with that model.
    DCM 510 - ORP, pH
    DCM 511 - ORP, pH, Free Cl
    DCM 512 - ORP, pH, Free Cl, Total Cl
    DCM 513 - ORP, pH, Total Cl
    DCM 516 - pH, Total Cl