NSF Product and Service Listings

These NSF Official Listings are current as of Sunday, September 20, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/Pools/Listings.asp?Company=C0291787&Standard=050&

NSF/ANSI 50
Equipment for Swimming Pools, Spas, Hot Tubs
and Other Recreational Water Facilities


 
EMEC SRL 
Corso Vittorio Emanuele II n. 15
20122 Milano 
Italy 
39 074 622 841
Visit this company's website

Facility : Rieti, Italy

Mechanical Chemical Feeding Equipment

Chemical Metering Pumps[1] [2] [3]
K xx yyyyy z 00 ww  

[1] Certified for Pool and Spa End Use.
[2] These pumps are approved for use with the following media at the maximum concentrations
    listed below. These products are evaluated by diluting the exposed water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI Standard 50:
    Hydrochloric acid (32.0%) and Sodium hypochlorite (15%).
[3] z     - Liquid end
            A - Z/0 - 9
    ww    - Input voltage + plug type Corresponding Rated current
            01 - 230Vac + "no plug" 2A
            03 - 115Vac + US   0.5A
            04 - 24Vac + "no plug" 2A
            05 - 12 Vdc + "no plug" 3.15A
            07 - 24Vdc + "no plug" 2A
            21 - 230Vac + US plug
    xx    - Model
            A - Z
    yyyyy - Capacity
            0 - 99 BAR
            0 - 999 L/h



Automatic Controllers
Trade Designation Parameters Operational
Range		 Accuracy End Use

Automatic Controllers
LDPHCLT4zxxxx[1] [2] [3] Free CL 0.5 - 1.5 mg/l ± 10% Pool or Spa/Hot Tub
LDPHCLT4zxxxx[1] [2] [3] pH 6.8 - 8.2 ± 0.14 S.U Pool
LDPHCLT4zxxxx[1] [2] [3] pH 6.8 - 8.2 ± 0.10 S.U Spa/Hot Tub
LDPHCLTzxxxx[3] [4] [5] Free CL 0 - 10 mg/l ± 10% Pool or Spa/Hot Tub
LDPHCLTzxxxx[3] [4] [5] pH 6.8 - 8.2 ± 0.14 S.U Pool
LDPHCLTzxxxx[3] [4] [5] pH 6.8 - 8.2 ± 0.10 S.U Spa/Hot Tub
LDPHRHTzyxxxx[6] [7] [8] ORP 650 mV-850 mV ± 2% Pool or Spa/Hot Tub
LDPHRHTzyxxxx[6] [7] [8] pH 6.8 - 8.2 ± 0.14 S.U Pool
LDPHRHTzyxxxx[6] [7] [8] pH 6.8 - 8.2 ± 0.10 S.U Spa/Hot Tub 

[1] Controller Code LDPHCLTxx34x9814000x. Where x could be any alphanumerical character.
[2] Controller uses
    pH and CL Probe: EPHS, or EPHM, or EPHL
    Probe Holder: ECL6/ECL12 and Temperature Probe: ETEPT/CH18
[3] z = pH probe S, M or L. Where x could be any alphanumerical character.
[4] Controller Code LDPHCLTxx34x981T000x. Where x could be any alphanumerical character.
[5] Controller uses
    pH Probe: EPHS, or EPHM, or EPHL
    Cl Probe: SCL3S/20
    Probe Holder: PEF1R and Temperature Probe: ETEPT/CH18"
[6] Controller Code LDPHRHTxx34x9812000x. Where x could be any alphanumerical character.
[7] Controller uses
    pH Probe: EPHS, or EPHM, or EPHL
    Cl Probe: EPHS, EPHM, or EPHL
    ORP Probe: ERHS, ERHM, ERHL
    Probe Holder: PEF2 and Temperature Probe: ETEPT/CH18"
[8] z = pH probe S, M or L. Where y = ORP probe S, M, or L. Where x could be any
    alphanumerical character.



Combination Equipment
Trade Designation Maximum
Flow Rate
(gpm)		 End Use

Control Panels[1] [2]
TLxx34xx12000PS0xNxx[3] N/A Pool or Spa/Hot Tub
TLxx34xx14000ES2xNxx[4] [5] N/A Pool or Spa/Hot Tub
TLxx34xx1T000PS0xNxx[3] N/A Pool or Spa/Hot Tub 

[1] Where x could be any alphanumerical character.
[2] The control panel includes NSF certified metering pump model K xx yyyyy z 00 ww
[3] The control panel includes NSF certified with automated controller model LDPHCLTZYXXXX
    for pH and ORP.
[4] The control panel includes NSF certified with automated controller model LDPHCLT4ZXXXX
    for pH and free chlorine.
[5] The control panel includes NSF certified with automated controller model LDPHCLTZXXXX
    for pH and free chlorine.


Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds