NSF Product and Service Listings

[1] Follow manufacturer's instructions for the installation and operation of this equipment.
    Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.

[1] Provided with Certified Muratic Acid Mechanical Feeder with an output of 0.528 gal/hr.
[2] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[3] May include derived CI PPM display.
[4] Certification includes optional AB-300 TSP High Output Acid Pump with 100% output at
    5.28 gal/hr of 36% muratic acid.  Use of this pump below 100% output will void
    certification.

[2] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[5] Certified for use with AB-300 Muriatic Acid Peristaltic Feeder with an output of 0.528
    gal/hr.
[6] Certified for use with optional AB-300 TSP High Output Diaphragm Acid Pump with 100%
    output at 5.28 gal/hr or 36% muriatic acid. Use of this pump Below 100% output will void
    certification.

[1] Controller Code LDPHCLTxx34x9814000x. Where x could be any alphanumerical character.
[2] Controller uses
    pH and CL Probe: EPHS, or EPHM, or EPHL
    Probe Holder: ECL6/ECL12 and Temperature Probe: ETEPT/CH18
[3] z = pH probe S, M or L. Where x could be any alphanumerical character.
[4] Controller Code LDPHCLTxx34x981T000x. Where x could be any alphanumerical character.
[5] Controller uses
    pH Probe: EPHS, or EPHM, or EPHL
    Cl Probe: SCL3S/20
    Probe Holder: PEF1R and Temperature Probe: ETEPT/CH18"
[6] Controller Code LDPHRHTxx34x9812000x. Where x could be any alphanumerical character.
[7] Controller uses
    pH Probe: EPHS, or EPHM, or EPHL
    Cl Probe: EPHS, EPHM, or EPHL
    ORP Probe: ERHS, ERHM, ERHL
    Probe Holder: PEF2 and Temperature Probe: ETEPT/CH18"
[8] z = pH probe S, M or L. Where y = ORP probe S, M, or L. Where x could be any
    alphanumerical character.

[1] Certified for use with the ERP-712D Pyxis and CS4MA10-M12 Reiss GmbH probes.

[1] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[2] Maximum output rate is 2.45 lbs/day for Pools, and 3.8 lbs/day for Spas utilizing
    BROM-A0Gard brand Bactericide-Algaecide-Disinfectant-Bromine Tablets.

[1] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[3] XXXX suffix may be one to four characters used to indicate a special combination of
    fittings supplied or special packaging.
[4] Maximum output rate is 2.3 lbs/day for pools, and 4.6 lbs/day for Spas available
    chlorine.
[5] NSF Qualification testing was performed using Regal Chemical Company 3" Chlorinated 99%
    active Trichlor-s triazinetrione Chlorine Tablets.

[1] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[2] Maximum output rate is 2.45 lbs/day for Pools, and 3.8 lbs/day for Spas utilizing
    BROM-A0Gard brand Bactericide-Algaecide-Disinfectant-Bromine Tablets.

[1] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[3] XXXX suffix may be one to four characters used to indicate a special combination of
    fittings supplied or special packaging.
[4] Maximum output rate is 2.3 lbs/day for pools, and 4.6 lbs/day for Spas available
    chlorine.
[5] NSF Qualification testing was performed using Regal Chemical Company 3" Chlorinated 99%
    active Trichlor-s triazinetrione Chlorine Tablets.

[1] Certified for Pool use
[2] Skimmer Lid is made of a Natural Stone: Tavertine
[3] Residential use
[4] Certified for a maximum flow rate of 130 gpm.
[5] Certified for a maximum flow rate of 70 gpm.

[1] Follow manufacturer's instructions for the installation and operation of this equipment.
    Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.

[1] Complies with NSF/ANSI Standard 50 health effects for pools and spas.
[2] This product meets Standard 50 section 19.2 chemical resistance requirements.
[3] Water Contact Temperature: Pool and Spa/Hot Tub
[4] Only products bearing the NSF Mark are Certified.
[5] Operational pH Range: 6.8-8.2, accuracy ±2%
[6] Operational ORP Range: 0-900 mV, accuracy ±3%