NSF Product and Service Listings

[3] Pumps are non-self priming.
[4] Single Speed Pumps
[5] Pumps are not supplied with integral strainers. Strainers are to be installed during
    pump installation.
[6] 400N Series includes the 411N, 412N and 413N Series.
[7] Certified for pool end use only.
[8] NSF Listed pumps begin with serial number 01-325956.
[9] Pump motors greater than 5 HP have data plate requirements as described in the Deviation
    to NSF/ANSI Standard 50 number AO-050-0006.

[1] Certified for pool and spa end use.
[2] Listing Includes 3801 and 3804 Series.
[3] Pumps are not supplied with integral strainers. Strainers are to be installed during
    pump installation.
[4] Pumps are non-self priming.
[5] Single Speed Pumps

[1] Certified for Pool and Spa End Use
[2] These pumps are approved for use with Sodium Hypochlorite (12.5%).

[1] Certified for Pool and Spa End Use
[3] X - Inlet/outlet connection type where "S" = 3/8" OD x 1/4" ID tubing and "M" = 1/2"
    male NPT
[4] Voltage - 115V AC
[5] Voltage - 230V AC
[6] Voltage - 220V AC

[1] Certified for Pool and Spa End Use
[3] X - Inlet/outlet connection type where "S" = 3/8" OD x 1/4" ID tubing and "M" = 1/2"
    male NPT
[4] Voltage - 115V AC
[5] Voltage - 230V AC
[6] Voltage - 220V AC

[10] a - Maximum motor RPM (0, 1, 2, or 3)
     b - Power supply (0, 1, 2, 5, 6, or 7)
     c - Output control (D, A, B, C, S, or X)
     d - Pump tube size and material (4, 6, or 7)
     e - Tubing connection type (T or Q)
     If a - 3, maximum working pressure is 75 psi
     If d - 7, maximum working pressure is 50 psi
     Units Listed for Pool and Spa/Hot Tub end use.  Unless noted above, the maximum working
     pressure is 100 psi.

[1] Certified for pools and spa end use.
[2] Single Speed
[3] Self-priming to 5 ft.
[4] Self-priming to 6.5 ft

[1] Certified for pools and spa end use.
[3] Self-priming to 5 ft.
[5] Variable speed.
[6] SVRS function has been evaluated to ASME A112.19.17.2010.
[7] SVRS has not been evaluated.

[1] Certified for Pool and Spa End Use.
[2] These pumps are approved for use with the following media at the maximum concentrations
    listed below. These products are evaluated by diluting the exposed water treatment
    chemical to its maximum use level (MUL), as defined in NSF/ANSI Standard 50:
    Hydrochloric acid (32.0%) and Sodium hypochlorite (15%).
[3] z     - Liquid end
            A - Z/0 - 9
    ww    - Input voltage + plug type Corresponding Rated current
            01 - 230Vac + "no plug" 2A
            03 - 115Vac + US   0.5A
            04 - 24Vac + "no plug" 2A
            05 - 12 Vdc + "no plug" 3.15A
            07 - 24Vdc + "no plug" 2A
            21 - 230Vac + US plug
    xx    - Model
            A - Z
    yyyyy - Capacity
            0 - 99 BAR
            0 - 999 L/h
    

[1] Certified for Pool End Use only.
    "T" stands for thrust balanced.
    "M" stands for medium flow.

[1] Certified for pool and spa end use.
[1] Certified for pool and spa end use.
[2] Self Priming with 3" pipe.
[3] Maximum rated horsepower suffix:
    X5  - 1/2 hp
    X7  - 3/4 hp
    X10 - 1 hp
    X15 - 1 1/2 hp
    X20 - 2 hp
    X25 - 2 1/2 hp
[4] With or without suffix VSP (Variable Speed Pump).
[5] With or without suffix X1

[1] Certified for pool and spa end use.
[4] With or without suffix VSP (Variable Speed Pump).
[5] With or without suffix X1
[6] With or without any one or two character alphanumeric prefix for marketing purposes.
[7] With or without suffix EXP.
[8] With or without suffix BH (Special Logo for Blue Haven, Inc).
[9] May include suffix for private labeling.
[10] With or without suffix EE.
     EE - Energy efficient
[11] Self-prime with 2" pipe.
[12] All Max-Flo XL models include 1 1/2" x 2" CPVC unions.
[13] With or without suffix VSPND (variable speed pump w/controller interface).
[14] Self-prime with 1.5" pipe.
[15] With quiet impeller.
[16] Same unit as SP2310x15 but will display the logo EnergyFlo/Swim Pro.

[18] Series 2600 with or without suffix EE and Series 3000 pumps with or without suffixes EE,
     AQ, BLK, and RAM.
     AQ  - Beige pump housing and motor
     AZ  - Threaded strainer housing cover
     BH  - Special logo for Blue Haven, Inc.
     BLK - Black motor
     CA  - Labeled for sale in California
     CP  - Special logo for California Pools
     EE  - Energy efficient
     FL  - Gold motor
     NTS - Special logo for In The Swim
     RAM - RAM chemical label
     UN  - Provided with union couplings
[19] Suffix numbers denote cycle and phase.
[20] With or without suffixes 2 or 2S.

[1] Certified for pool and spa use.
[2] The model number may be accompanied by the suffix W2B or W30.

[1] Certified for pool and spa use.
[2] The model number may be accompanied by the suffix W2B or W30.

[1] Certified for pool and spa use.
[3] Single Speed
[4] Certified for self-priming to 5 feet

[1] Certified for pool and spa use.
[3] Single Speed
[4] Certified for self-priming to 5 feet

[1] Certified for pool and spa use.
[3] Single Speed
[4] Certified for self-priming to 5 feet

[1] Certified for pool and spa use.
[3] Single Speed
[4] Certified for self-priming to 5 feet

[1] Certified for Pool and Spa/Hot Tub end use.
[2] Listed for use with muriatic acid (31%) and sodium hypochlorite (12.5%).
[3] W - 2, 8, 9
    X - Flow and pressure rating of the pump:
        (1) 0.25 gph at 250 psi
        (4) 0.50 gph at 250 psi
        (5) 1.0 gph at 110 psi
        (6) 2.0 gph at 50 psi
        (7) 0.42 gph at 140 psi
        (8) 0.75 gph at 80 psi
    Y  - Voltage code
    Z  - Liquid handling assembly
         1st digit is a generic liquid end code 
         2nd digit is the Liquifram™ (diaphragm) size code
         3rd digit identifies the materials of construction for the pump
         4th digit is the valve code
         5th digit represents the tubing used (inch, metric, UV resistant, or none for 
         pipe connections).
[4] This product has been exempted from the permanent product marking requirement, due to
    size restrictions.
[5] Models Certified out of Ivyland, PA begin with serial number 14093868282-1.

[1] Certified for Pool and Spa/Hot Tub end use.
[2] Listed for use with muriatic acid (31%) and sodium hypochlorite (12.5%).
[4] This product has been exempted from the permanent product marking requirement, due to
    size restrictions.
[5] Models Certified out of Ivyland, PA begin with serial number 14093868282-1.
[6] May have prefix LWP indicating a tan housing.
[7] Beginning serial number for NSF Listed units is 901001.
[8] X - Drive assembly
        0 - Speed (stroking frequency) fixed and stroke length manually adjustable.
        1 - Speed (stroking frequency) and stroke length manually adjustable.
        7 - Manual adjustment features of Series 1 plus switch conversion to external
            control for automatic systems.
        9 - Manual adjustment features of Series 1 plus liquid crystal display and keypad.
    Y - Voltage code
        1 - 120 V AC US plug
        2 - 240 V AC US plug
        3 - 220-240 V AC DIN plug
        5 - 240-250 V AC UK plug
        6 - 240-250 V AC Australia/New Zealand plug
        7 - 220 V AC Swiss plug
        D - 12 V DC powered pump (J5 series only)
    
    Z indicates liquid handling assembly (11, 11S, 12S, 15, 15S, 20HV, 20, 20S, 24, 25HV,
    25P, 25T, 26, 26S, 27, 29, 30, 30HV, 32, 34, 35HV, 35P, 35T, 36, 37, 62, 62S, 65, 65S,
    71, 71FS, 71S, 72, 72S, 72T, 74. 74S, 75HV, 75, 75S, 75T, 76, 76HV, 79, 85HV, 86HV, 89,
    91FS, 92, 92S, 92T, 94, 94S, 95, 95S, 95T, 111, 111S, 112, 112S, 118, 118S, 150FS, 151,
    151P, 151S, 152, 152S, 155, 155S, 156HV, 158, 158S, 161, 161S, 162, 162S, 168, 168S,
    191, 191S, 192, 192S, 198, 198S, 217, 257, 277, 281, 297, 310, 311, 312, 313, 350, 351,
    352, 353, 358, 360, 361, 362, 363, 390, 391, 392, 393, 398, 450, 458, 498, and 917)
    
    All series may have suffix U at the end of the liquid end number indicating the use
    of UV resistant tubing
    
    300 series liquid end may have suffix BP, BU, SI, SP, SU, TI, TP, or TU
    
    400 series liquid end may have suffix FI, SI, or TI
[9] May have suffix D indicating blue control panel and black knob caps.

[1] Certified for Swimming Pool and Spa use.
[2] Pumps are not supplied with integral strainers. Strainers are to be installed during
    pump installation.
[3] 1750 RPM Motor
[4] 1770 RPM Motor

[1] 3500 RPM motor
[2] 1750 RPM motor
[3] 1150 RPM motor
[4] 1780 RPM motor
[5] 1770 RPM motor
[6] Evaluated and tested for Swimming Pool use only.
[7] Model designations may contain a dash (-) between the last two digits.
[8] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[9] Motors are not supplied with internal thermal overload protection.  External thermal
    protection must be provided through the use of magnetic line starters, or similar
    devices.

[1] 3500 RPM motor
[2] 1750 RPM motor
[3] 1150 RPM motor
[6] Evaluated and tested for Swimming Pool use only.
[7] Model designations may contain a dash (-) between the last two digits.
[8] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[9] Motors are not supplied with internal thermal overload protection.  External thermal
    protection must be provided through the use of magnetic line starters, or similar
    devices.

[1] 3500 RPM motor
[2] 1750 RPM motor
[3] 1150 RPM motor
[4] 1780 RPM motor
[6] Evaluated and tested for Swimming Pool use only.
[7] Model designations may contain a dash (-) between the last two digits.
[8] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[9] Motors are not supplied with internal thermal overload protection.  External thermal
    protection must be provided through the use of magnetic line starters, or similar
    devices.

[1] 3500 RPM motor
[2] 1750 RPM motor
[3] 1150 RPM motor
[4] 1780 RPM motor
[6] Evaluated and tested for Swimming Pool use only.
[7] Model designations may contain a dash (-) between the last two digits.
[8] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[9] Motors are not supplied with internal thermal overload protection.  External thermal
    protection must be provided through the use of magnetic line starters, or similar
    devices.

[1] 3500 RPM motor
[2] 1750 RPM motor
[3] 1150 RPM motor
[6] Evaluated and tested for Swimming Pool use only.
[7] Model designations may contain a dash (-) between the last two digits.
[8] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[9] Motors are not supplied with internal thermal overload protection.  External thermal
    protection must be provided through the use of magnetic line starters, or similar
    devices.

[1] 3500 RPM motor
[2] 1750 RPM motor
[3] 1150 RPM motor
[4] 1780 RPM motor
[5] 1770 RPM motor
[6] Evaluated and tested for Swimming Pool use only.
[7] Model designations may contain a dash (-) between the last two digits.
[8] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[9] Motors are not supplied with internal thermal overload protection.  External thermal
    protection must be provided through the use of magnetic line starters, or similar
    devices.

[1] Pumps are non-self priming.
[2] K suffix denotes 3 phase motor.
    No K suffix denotes 1 phase motor.
    All motors with SF - 1.15
[3] For pool use only.
[4] With Strainer Basket.

[5] Tested and Listed for pools, spas, and hot tubs.

[4] With Strainer Basket.
[5] Tested and Listed for pools, spas, and hot tubs.
[6] K - 3 Phase models, no K denotes 1 phase models
    W - Waterfall models

[1] Tested and Listed for pools, spas, and hot tubs.
[2] NSF Certification does not include testing to ASME A112.19.17.

[1] Tested and Listed for pools, spas, and hot tubs.
[2] NSF Certification does not include testing to ASME A112.19.17.

[5] Certified for Pool and Spa/Hot Tub end use.
[6] Variable Speed
[7] Certified for 10' prime height

[1] Tested and Listed for pools, spas, and hot tubs.
[3] Model numbers may include the suffix - "INT".
[4] WFK - Three phase motor
     WF - Single phase motor
    WFE - Energy efficient motor
      2 - 1/2 H.P.
      3 - 3/4 H.P.
      4 - 1 H.P.
      6 - 1 1/2 H.P.
      8 - 2 H.P.
     12 - 3 H.P.
    
     Whisper Flo model numbers may also carry the prefixes "Andrews Advantage
      Series" or "Ultra".
[8] Only products bearing the NSF Mark are Certified.

[7] Version
    0 - Standard
[8] Logo
    0 - Standard, with logo
[9] Electrical Connection
    U - 100-230 V, ±10 %, 50/60 Hz
[10] Cable and Plug w/6ft power cord, single phase
     A - European Plug
     D - N. American Plug, 115V
[11] Relay, Pre-set to:
     0 - Without relay
     1 - 1 x changeover contact 230V-2A, fault indicating relay N/C
     4 - 2 x N/O 24V-100mA, such as 1 + pacing relay
     C - 1 x N/O 24V-100mA, such as 1+4 – 20mA output
     F - Auto degassing module (not available for version 2504)
     G - Auto degassing module + fault relay (not available for version 2504), comes with 
         panel
[12] Accessories:
     0 - Not Included (for PVDF, TT, SS)
     1 - With foot and injection valve, 5ft PVC suction tubing, 10ft PE discharging tubing
[13] Control Variants:
     0 - Manual + external 1:1 with pulse control
     3 - Manual + external with pulse control + analogue 0/4-20mA
     5 - Options 3+4 week process timer
     C - Options 3+CANopen
     R - Options 3+PROFIBUS®DP interface, M12
     Note: no Relay with PROFIBUS® version “R”
[14] Metering Monitor:
     0 - Pulse signal output
[15] Bluetooth Connection:
     0 - Not included
     B - Included
[16] Language
     EN - Standard

[1] Certified for Pool end use only.
[2] Tested and intended for use in Riverflow System manufactured by Riverflow Pools LLC.

[1] Certified for Swimming Pool and Spa use
[2] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[3] 1760 RPM Motor
[4] 3530 RPM Motor
[5] 1160 RPM Motor
[6] 3560 RPM Motor
[7] 1170 RPM Motor
[8] 1765 RPM Motor
[9] 3580 RPM Motor
[10] 3540 RPM Motor
[11] 1180 RPM Motor
[12] 1770 RPM Motor
[13] 1780 RPM Motor
[14] 1790 RPM Motor
[15] 1150 RPM Motor
[16] 1740 RPM Motor

[1] Certified for Swimming Pool and Spa use
[2] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[3] 1760 RPM Motor
[4] 3530 RPM Motor
[5] 1160 RPM Motor
[6] 3560 RPM Motor
[7] 1170 RPM Motor
[8] 1765 RPM Motor
[9] 3580 RPM Motor
[10] 3540 RPM Motor
[11] 1180 RPM Motor
[12] 1770 RPM Motor
[13] 1780 RPM Motor
[14] 1790 RPM Motor

[1] Certified for pool and spa use.
[2] Certified for self-priming to 10 feet.
[3] Single Speed
[4] Variable Speed

[5] Certified for pool and spa applications.
[6] Single Speed Pumps
[7] With Strainer Basket

[1] Certified for Pool and Spa/Hot Tub end use.

[1] Pumps Certified for pool and spa end use.

[1] Certified for pool and spa applications.
[2] Single Speed Pumps.
[3] Pumps are not supplied with integral strainers. Strainers are to be installed during
    pump installation. 
[4] Certified for self-priming to 10 feet.

[1] Certified for pool and spa applications.
[2] Single Speed Pumps.
[3] Pumps are not supplied with integral strainers.  Strainers are to be installed during
    pump installation.
[4] Certified for self-priming to 10 feet.