NSF Product and Service Listings

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[6] The well is to be properly flushed and drained before being placed in service.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] Certified for addition to the feedwater for evaporative desalination units only.
[2] Product use limited to minimum plant water retention time of 16 hours.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[4] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[5] This product contains sulfite. Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[6] The well is to be properly flushed and drained before being placed in service.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] Certified for addition to the feedwater for evaporative desalination units only.
[2] Product use limited to minimum plant water retention time of 16 hours.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[4] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] Certification is based on a maximum carry over of 50 ug/L DADMAC polymer.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] This product functions as a biocide and is to be added to the feed water for evaporation
    desalination units.
[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer’s use instructions.
[9] The well is to be properly flushed and drained before being placed in service.
[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] Certified for addition to the feedwater for evaporative desalination units only.
[4] Product use limited to minimum plant water retention time of 16 hours.
[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer’s use instructions.
[5] Certified to be used in conjunction with Scaletrol PDC9323 at equal to or less than 17%.
[6] Certified to be used in conjunction with Scaletrol PDC9323 at equal to or less than 7%.
[7] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[8] This product contains sulfite. Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[10] For products distributed in Canada, the company name on the product label may be shown
     as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] Certified for addition to the feedwater for evaporative desalination units only.
[2] Product use limited to minimum plant water retention time of 16 hours.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[4] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] Certification is based on a maximum carry over of 50 ug/L DADMAC polymer.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[6] This product contains sulfite.  Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.  The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[6] The well is to be properly flushed and drained before being placed in service.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] Certified for addition to the feedwater for evaporative desalination units only.
[2] Product use limited to minimum plant water retention time of 16 hours.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[5] This product contains sulfite.  Sulfites have been known to cause
    potentially lethal allergic reactions in sulfite-sensitive individuals.  The
    maximum recommended allowable residual sulfite level in the finished
    drinking water is 100 ppb (0.1 mg/L).
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[1] Certified for addition to the feedwater for evaporation desalination units only.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[1] Certified for addition to the feedwater for evaporation desalination units only.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[4] This product is to be added to the feedwater of evaporator type units only.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[3] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[5] This product contains sulfite. Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.

[1] This product functions as a biocide and is to be added to the feed water for evaporation
    desalination units.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[2] The Certification of this product has been restricted to a maximum use level (MUL) that
    is less than the 10ppm typical use level of chlorine specified for hypochlorite products
    under NSF/ANSI/CAN 60.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[4] This product is exclusively for sale and distribution outside of the United States.
[5] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] This product contains sulfite.  Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.  The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
    
[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[7] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[1] Based on an evaluation of health effects data, the level of aluminum in the finished
    drinking water should not exceed 2 mg/L.
[2] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[2] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[2] Certified to be used in conjunction with Scaletrol PDC9323 at equal to or less than 17%.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[4] Certified for addition to the feedwater for evaporative desalination units only.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[3] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[4] Certified for addition to the feedwater for evaporative desalination units only.
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[5] This product containes sulfite.  Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.  The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[6] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[1] Certified for addition to the feedwater for evaporation desalination units only.
[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[1] Certified for addition to the feedwater for evaporation desalination units only.
[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[3] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[2] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

[4] This product contains sulfite. Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
     drinking water shall not exceed 2.0 mg/L.

[5] For products distributed in Canada, the company name on the product label may be shown
    as Veolia Water Technologies & Solutions Canada GP, Oakville, ON.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.