NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=08590&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Univar Solutions USA | |
| 3075 Highland Parkway | |
| Suite 200 | |
| Downers Grove, IL 60515 | |
| United States | |
| 425-889-3400 |
Facility : # 1 Distribution Center - Richmond, CA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 10% | pH Adjustment | 500mg/L |
| Caustic Soda 13% | pH Adjustment | 384mg/L |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 10% | pH Adjustment | 500mg/L |
| Sodium Hydroxide 13% | pH Adjustment | 384mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : # 1 St. Louis, MO
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 400mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| Aqua Mag | Corrosion & Scale Control | 23 mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% DWG | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% TRF | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Fluocilicic Acid | Fluoridation | 5mg/L |
| HFS | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 36% | pH Adjustment | 28mg/L |
| Phosphoric Acid 38% | pH Adjustment | 27mg/L |
| Phosphoric Acid 75% | pH Adjustment | 13mg/L |
| Phosphoric Acid 85% | pH Adjustment | 12mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Vanfloc DM20PG | Coagulation & Flocculation | 50 mg/L |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| SternPAC | Coagulation & Flocculation | 250 mg/L |
| SternPAC 70 | Coagulation & Flocculation | 250mg/L |
| Vanpac 2300 | Coagulation & Flocculation | 250 mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Bisulfite |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 38-40% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution | Dechlorinator & Antioxidant | 46mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite | Disinfection & Oxidation | 40mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 40mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : # 1 Chattanooga, TN
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Solution | Coagulation & Flocculation | 150mg/L |
| Liquid Alum | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Caustic Soda 30% | Corrosion Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 30% | Corrosion Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : # 2 St. Louis, MO
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% Solution | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 50% Solution | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide - 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
Facility : # 2 Distribution Center - Toledo, OH
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 50% | Corrosion Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Chickasaw, AL
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
Facility : Distribution Center - Birmingham, AL
|
Fluorosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| FSA | Fluoridation | 5mg/L |
| Fluorosilicic Acid | Fluoridation | 5mg/L |
| Fluosilicic Acid | Fluoridation | 5mg/L |
| HFS | Fluoridation | 5mg/L |
| Hexafluorosilicic Acid | Fluoridation | 5mg/L |
| Hexafluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluorosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Glendale, AZ
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
Facility : Distribution Center - Phoenix 27th Ave., AZ
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 20% | pH Adjustment | 75mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 25% | Dechlorination | 46mg/L |
| Sodium Bisulfite 38% | Dechlorination | 46mg/L |
| Sodium Bisulfite 39% | Dechlorination | 46mg/L |
| Sodium Bisulfite 40% | Dechlorination | 46mg/L |
| Sodium Bisulfite 41% | Dechlorination | 46mg/L |
| Sodium Bisulfite 42% | Dechlorination | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite 5.25% | Disinfection & Oxidation | 200mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 25% | pH Adjustment | 186mg/L |
| Sulfuric Acid, 30% | pH Adjustment | 153mg/L |
| Sulfuric Acid, 33% | pH Adjustment | 141mg/L |
| Sulfuric Acid, 36% | pH Adjustment | 129mg/L |
| Sulfuric Acid, 50% | pH Adjustment | 93mg/L |
| Sulfuric Acid, 70% | pH Adjustment | 66mg/L |
| Sulfuric Acid, 74% | pH Adjustment | 63mg/L |
| Sulfuric Acid, 78% | pH Adjustment | 60mg/L |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : North Little Rock, AR
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion & Scale Control Sequestering |
200mg/L |
| Caustic Soda 50% | Corrosion & Scale Control Sequestering |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control Sequestering |
200mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control Sequestering |
100mg/L |
Facility : Commerce, CA
|
Acetic Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Acetic Acid | Biological Substrate | 188mg/L |
| Acetic Acid 56% | Biological Substrate | 266mg/L |
| Acetic Acid 80% | Biological Substrate | 188mg/L |
[1] This product is designed to function as a reducing agent in biologically active drinking
water treatment systems.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Univar Coagulant 1160 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 40% | Coagulation & Flocculation | 60mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate Solution 40% | Chloramination | 60mg/L |
| Liquid Ammonium Sulfate 40% | Chloramination | 60mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 50% | Coagulation & Flocculation | 600mg/L |
|
Hydrogen Peroxide [HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide 27%[2] | Oxidant | 3.9mg/L |
| Hydrogen Peroxide 34% | Oxidant | 3mg/L |
| Hydrogen Peroxide 35%[3] | Oxidant | 3mg/L |
| Hydrogen Peroxide 50%[4] | Oxidant | 2.1mg/L |
[2] The 27% solution may be used for sulfide control and in conjunction with ozone for
organic control at a concentration use level of 111 mg/L when followed by chlorination
of the treated water.
[3] The 35% solution may be used for sulfide control and in conjunction with ozone for
organic control at a concentration use level of 85 mg/L when followed by chlorination of
the treated water.
[4] The 50% solution may be used for sulfide control and in conjunction with ozone for
organic control at a concentration use level of 60 mg/L when followed by chlorination of
the treated water.
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Hydroxyethylidene Diphosphonic Acid |
||
| Trade Designation | Product Function | Max Use |
| Caflon PP2010 | Distillation Antiscalant Reverse Osmosis Antiscalant |
10mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| CAFLON SAFE ACID 6 | Distillation Antiscalant Reverse Osmosis Antiscalant |
80mg/L |
|
Sodium Bicarbonate |
||
| Trade Designation | Product Function | Max Use |
| Soda Ash 15% Solution | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Carbonate 15% Solution | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Bisulfate[5] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfate 25% | Dechlorination | 46mg/L |
| Sodium Bisulfate 38-40% | Dechlorination | 46mg/L |
[5] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 32% | pH Adjustment | 156mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 32% | pH Adjustment | 156mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% | Disinfection & Oxidation | 84mg/L |
| Liquichlor 12.5% Solution | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Silicate - Liquid (All Grades) | Corrosion & Scale Control | 25mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | pH Adjustment | 50mg/L |
| Sulfuric Acid 93% 66B BULK | pH Adjustment | 50mg/L |
| Sulfuric Acid 93% MN Bulk | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Stockton, CA
|
Sodium Bisulfite |
||
| Trade Designation | Product Function | Max Use |
| SODIUM BISULFITE 25%[1] | Dechlorination | 46mg/L |
[1] This product contains sulfite. |
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Wilmington, CA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 3% | pH Adjustment | 1667mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 3% | pH Adjustment | 1667mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Fresno, CA
|
Citric Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 30% | Membrane Cleaner | NA |
| Citric Acid 50% | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Redwood City, CA
|
Calcium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Calcium Hydroxide Neutralac SLS45 | pH Adjustment | 300mg/L |
|
Citric Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid, 50% | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacture's use instructions.
|
||
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 10% | pH Adjustment | 140mg/L |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 20% | pH Adjustment | 70mg/L |
| Hydrochloric Acid 25% | pH Adjustment | 56mg/L |
| Hydrochloric Acid 28% | pH Adjustment | 50mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, 75% | Corrosion & Scale Control | 13mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | pH Adjustment | 100mg/L |
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 25% | Dechlorination | 46mg/L |
| Sodium Bisulfite 42% | Dechlorination | 46mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 33% | pH Adjustment | 152mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 20% | pH Adjustment | 233mg/L |
| Sulfuric Acid, 25% | pH Adjustment | 186mg/L |
| Sulfuric Acid, 30% | pH Adjustment | 153mg/L |
| Sulfuric Acid, 33% | pH Adjustment | 141mg/L |
| Sulfuric Acid, 36% | pH Adjustment | 129mg/L |
| Sulfuric Acid, 50% | pH Adjustment | 93mg/L |
| Sulfuric Acid, 70% | pH Adjustment | 66mg/L |
| Sulfuric Acid, 74% | pH Adjustment | 63mg/L |
| Sulfuric Acid, 78% | pH Adjustment | 60mg/L |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : San Pedro, CA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 3% | pH Adjustment | 1667mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 3% | pH Adjustment | 1667mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 165mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Santa Fe Springs, CA
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate 40% | Chloramination | 60mg/L |
| Ammonium Sulfate Solution 40% | Chloramination | 60mg/L |
|
Citric Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid, 50% | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 20% | pH Adjustment | 70mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Miscellaneous Water Supply Products[2] |
||
| Trade Designation | Product Function | Max Use |
| Nitric Acid 30% | Other | 3mg/L |
| Nitric Acid 35% | Other | 3mg/L |
| Nitric Acid 50% | Other | 2mg/L |
| Nitric Acid 67% | Other | 1mg/L |
[2] This product functions as a system cleaning aid. |
||
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, 36% | Corrosion & Scale Control | 28mg/L |
| Phosphoric Acid, 75% | Corrosion & Scale Control | 13mg/L |
| Phosphoric Acid, 85% | Corrosion & Scale Control | 12mg/L |
|
Sodium Bisulfite[3] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 38-40% | Dechlorination | 46mg/L |
| Sodium Bisulfite 25% | Dechlorination | 46mg/L |
[3] This product contains sulfite. Sulfites have been known to cause potentially lethal
alergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 32% | pH Adjustment | 156mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 32% | pH Adjustment | 156mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 105mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite 5.25% | Disinfection & Oxidation | 200mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| Calaway | Corrosion & Scale Control | 56mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 20% | pH Adjustment | 233mg/L |
| Sulfuric Acid, 25% | pH Adjustment | 186mg/L |
| Sulfuric Acid, 30% | pH Adjustment | 153mg/L |
| Sulfuric Acid, 33% | pH Adjustment | 141mg/L |
| Sulfuric Acid, 36% | pH Adjustment | 129mg/L |
| Sulfuric Acid, 50% | pH Adjustment | 93mg/L |
| Sulfuric Acid, 70% | pH Adjustment | 66mg/L |
| Sulfuric Acid, 74% | pH Adjustment | 63mg/L |
| Sulfuric Acid, 78% | pH Adjustment | 60mg/L |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Visalia, CA
|
Calcium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Calcium Hydroxide Neutralac SLS45 | pH Adjustment | 300mg/L |
|
Citric Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid, 50% | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following the manufacturer's use instructions.
|
||
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 20% | pH Adjustment | 70mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| HCL/Citric Blend | pH Adjustment | 40mg/L |
| Hydrochloric / Citric Acid Blend | pH Adjustment | 40mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | pH Adjustment | 100mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| Calaway | Corrosion & Scale Control | 56mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 36% | Corrosion & Scale Control pH Adjustment |
129mg/L |
| Sulfuric Acid 50% | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Sulfuric Acid 93% | Corrosion & Scale Control pH Adjustment |
50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Denver, CO
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate 40% | Chloramination | 60mg/L |
| Ammonium Sulfate Solution 40% | Chloramination | 60mg/L |
|
Citric Acid[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 50% Solution | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 20% | pH Adjustment | 75mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, 75% | Corrosion & Scale Control | 13mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | Corrosion & Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Henderson, CO
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 35% | Corrosion & Scale Control pH Adjustment |
40mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Fort Lauderdale, FL
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion & Scale Control | 200mg/L |
| Caustic Soda 50% | Corrosion & Scale Control | 100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control | 200mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control | 100mg/L |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Distribution Center - Jacksonville Contanda Terminal, FL
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 15% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Tampa, FL
|
Fluorosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| FSA | Fluoridation | 5mg/L |
| Fluorosilicic Acid | Fluoridation | 5mg/L |
| Fluosilicic Acid | Fluoridation | 5mg/L |
| HFS | Fluoridation | 5mg/L |
| Hexafluorosilicic Acid | Fluoridation | 5mg/L |
| Hexafluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluorosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Tampa, FL
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
Facility : Jacksonville, FL
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 10% | Disinfection & Oxidation | 55mg/L |
| Liquichlor 12.5% | Disinfection & Oxidation | 44mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 55mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 44mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Tampa, FL
|
Fluorosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| FSA | Fluoridation | 5mg/L |
| Fluorosilicic Acid | Fluoridation | 5mg/L |
| Fluosilicic Acid | Fluoridation | 5mg/L |
| HFS | Fluoridation | 5mg/L |
| Hexafluorosilicic Acid | Fluoridation | 5mg/L |
| Hexafluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluorosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| Caflon RO Scale Inhibitor 18 | Reverse Osmosis Antiscalant | 40mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash 45% | pH Adjustment | 100mg/L |
| Potassium Hydroxide 45% | pH Adjustment | 100mg/L |
|
Sodium Bisulfite |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite 25% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite 38-40% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution 38-40% | Dechlorinator & Antioxidant | 46mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control | 250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control | 200mg/L |
| Caustic Soda 50% | Corrosion & Scale Control | 100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control | 250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control | 200mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control | 100mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | pH Adjustment | 50mg/L |
| Sulfuric Acid 93% 66B BULK | pH Adjustment | 50mg/L |
| Sulfuric Acid 93% MN Bulk | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Brunswick, GA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment Corrosion & Scale Control |
333mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 15% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Dallas, GA
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Solution | Coagulation & Flocculation | 150mg/L |
| Liquid Alum | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Citric Acid |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 50% | Membrane Cleaner | NA |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | pH Adjustment | 100mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 38-40% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution | Dechlorinator & Antioxidant | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 105mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Savannah, GA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Basicphresh 50 - Caustic Soda 50% NaOH Bulk | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Caustic Soda 15% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 15% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are NSF Certified.
Facility : Norcross, GA
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPac XG | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Solution | Coagulation & Flocculation | 150mg/L |
| Liquid Alum | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate Solution | Coagulation & Flocculation | 600mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5 mg/L |
|
Hydroxyethylidene Diphosphonic Acid |
||
| Trade Designation | Product Function | Max Use |
| Caflon PP2010 | Distillation Antiscalant Reverse Osmosis Antiscalant |
10mg/L |
|
Miscellaneous Water Supply Products[1] |
||
| Trade Designation | Product Function | Max Use |
| Caflon P-RO 12.0 | Membrane Cleaner | NA |
| Caflon P-RO 3.0 | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | pH Adjustment | 100mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 32% | Corrosion Control pH Adjustment |
156mg/L |
| Caustic Soda 50% | Corrosion Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30-49% | Corrosion Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 32% | Corrosion Control pH Adjustment |
156mg/L |
| Sodium Hydroxide 50% | Corrosion Control pH Adjustment |
100mg/L |
| Weak Caustic | Corrosion Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 66 | Scale Control | 50 mg/L |
| Sulfuric Acid 93% | Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Nampa, ID
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Univar-Coagulant 2402G | Coagulation & Flocculation | 50mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Caustic Soda 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% Solution | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Bedford Park, IL
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Univar Coagulant 1160 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Hydroxyethylidene Diphosphonic Acid |
||
| Trade Designation | Product Function | Max Use |
| Caflon PP2010 | Distillation Antiscalant Reverse Osmosis Antiscalant |
10mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, 75% | Corrosion & Scale Control | 13mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 35% | pH Adjustment | 143mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 20% | pH Adjustment | 233mg/L |
| Sulfuric Acid, 25% | pH Adjustment | 186mg/L |
| Sulfuric Acid, 30% | pH Adjustment | 153mg/L |
| Sulfuric Acid, 33% | pH Adjustment | 141mg/L |
| Sulfuric Acid, 36% | pH Adjustment | 129mg/L |
| Sulfuric Acid, 50% | pH Adjustment | 93mg/L |
| Sulfuric Acid, 70% | pH Adjustment | 66mg/L |
| Sulfuric Acid, 74% | pH Adjustment | 63mg/L |
| Sulfuric Acid, 78% | pH Adjustment | 60mg/L |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Argo, IL
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 17% | pH Adjustment | 294mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 17% | pH Adjustment | 294mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
Facility : Distribution Center - Sauget, IL
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Willow Springs, IL
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, 75% | Corrosion & Scale Control | 13mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | Corrosion Control pH Adjustment |
333mg/L |
| Caustic Soda 20% | Corrosion Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 15% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 50% | pH Adjustment | 93mg/L |
| Sulfuric Acid 93% | pH Adjustment | 50mg/L |
| Sulfuric Acid 93% 66B BULK | pH Adjustment | 50mg/L |
| Sulfuric Acid 93% MN Bulk | pH Adjustment | 50mg/L |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Beech Grove, IN
|
Chlorine[CL] |
||
| Trade Designation | Product Function | Max Use |
| Chlorine | Disinfection & Oxidation | 30mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Indianapolis, IN
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | Corrosion & Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Kansas City, KS
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | Corrosion & Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center, Geismar, LA
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 20% | pH Adjustment | 70mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Caustic Soda 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% Solution | Disinfection & Oxidation | 39mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 39mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | Corrosion & Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Geismar Highway 75, LA
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 20% | pH Adjustment | 70mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 50% | Corrosion & Scale Control | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Baltimore, MD
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Basicphresh 50 - Caustic Soda 50% NaOH Bulk | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Caustic Soda 10% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Caustic Soda 15% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 10% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Sodium Hydroxide 15% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Sodium Hydroxide 20% | Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Baltimore, MD
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
70mg/L |
| Hydrochloric Acid 31% | Corrosion & Scale Control pH Adjustment |
33mg/L |
| Hydrochloric Acid 35% | Corrosion & Scale Control pH Adjustment |
30mg/L |
Facility : Distribution Center - Baltimore, MD
|
Fluorosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| FSA | Fluoridation | 5mg/L |
| Fluorosilicic Acid | Fluoridation | 5mg/L |
| Fluosilicic Acid | Fluoridation | 5mg/L |
| HFS | Fluoridation | 5mg/L |
| Hexafluorosilicic Acid | Fluoridation | 5mg/L |
| Hexafluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluorosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Lakeville, MN
|
Sodium Carbonate |
||
| Trade Designation | Product Function | Max Use |
| Soda Ash Dense | pH Adjustment | 150mg/L |
| Soda Ash Light | pH Adjustment | 150mg/L |
| Univar Dense | pH Adjustment | 150mg/L |
| Univar Light | pH Adjustment | 150mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : St. Paul Terrace Court, MN
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% DWG | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% TRF | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | pH Adjustment Corrosion & Scale Control |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| NaOH 20% | pH Adjustment Corrosion & Scale Control |
250mg/L |
| NaOH 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| NaOH 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| NaOH 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | pH Adjustment Corrosion & Scale Control |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% Solution | Disinfection & Oxidation | 23mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 23mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Omaha, NE
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 30% | pH Adjustment Corrosion & Scale Control |
165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 30% | pH Adjustment Corrosion & Scale Control |
165mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - South Sioux City, NE
|
Sodium Bisulfite |
||
| Trade Designation | Product Function | Max Use |
| SODIUM BISULFITE 38-40%[1] | Dechlorination | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Caustic Soda 30% | pH Adjustment Corrosion & Scale Control |
165mg/L |
| Caustic Soda 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 30% | pH Adjustment Corrosion & Scale Control |
165mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International
Facility : Distribution Center - Carteret, NJ
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Elizabeth, NJ
|
Fluorosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| FSA | Fluoridation | 5mg/L |
| Fluorosilicic Acid | Fluoridation | 5mg/L |
| Fluosilicic Acid | Fluoridation | 5mg/L |
| HFS | Fluoridation | 5mg/L |
| Hexafluorosilicic Acid | Fluoridation | 5mg/L |
| Hexafluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluorosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Terminal - Albuquerque, NM
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 50% | Corrosion & Scale Control | 100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control | 100mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Geneva, NY
|
Citric Acid[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 50% | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following the manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Charlotte, NC
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Solution | Coagulation & Flocculation | 150mg/L |
| Liquid Alum | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Citric Acid[1] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid, 50% Solution | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23 -25% | Fluoridation | 5mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion Control pH Adjustment |
200mg/L |
| Caustic Soda 32% | Corrosion Control pH Adjustment |
156mg/L |
| Caustic Soda 50% | Corrosion Control pH Adjustment |
100 mg/L |
| Sodium Hydroxide 25% | Corrosion Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 32% | Corrosion Control pH Adjustment |
156mg/L |
| Sodium Hydroxide 50% | Corrosion Control pH Adjustment |
100 mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% Solution | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Shelby, NC
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| HFS Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Spruce Pine, NC
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Fluosilicic Acid 23-32% | Fluoridation | 4mg/L |
| Hydrofluosilicic Acid 12-25% | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 26-32% | Fluoridation | 4mg/L |
| Hydrofluosilicic Acid 39-42% | Fluoridation | 1.2mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Wilmington, NC
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Basicphresh 50 - Caustic Soda 50% NaOH Bulk | pH Adjustment | 100mg/L |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
Facility : Distribution Center - Grand Forks, ND
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 50% | Corrosion & Scale Control | 100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Barberton, OH
|
Chlorine[CL] |
||
| Trade Designation | Product Function | Max Use |
| Chlorine | Disinfection & Oxidation | 30mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Cincinnati, OH
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Basicphresh 50 - Caustic Soda 50% NaOH Bulk | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Caustic Soda 10% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Caustic Soda 12.5% | Corrosion & Scale Control pH Adjustment |
400mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Columbiana, OH
|
Fluorosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| FSA | Fluoridation | 5mg/L |
| Fluorosilicic Acid | Fluoridation | 5mg/L |
| Fluosilicic Acid | Fluoridation | 5mg/L |
| HFS | Fluoridation | 5mg/L |
| Hexafluorosilicic Acid | Fluoridation | 5mg/L |
| Hexafluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluorosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Walbridge, OH
|
Calcium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| UniLime | Precipitation Agent | 1000mg/L |
| UniLime 30% | Precipitation Agent | 1000mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 31% | pH Adjustment | 40mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid | Corrosion & Scale Control | 13mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% | Disinfection & Oxidation | 78mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 78mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | Corrosion & Scale Control pH Adjustment |
50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Steubenville, OH
|
Sodium Permanganate[1] |
||
| Trade Designation | Product Function | Max Use |
| CARUSOL® | Oxidant | 176mg/L |
| CARUSOL® C | Oxidant | 88mg/L |
| CARUSOL® C Liquid Permanganate | Oxidant | 88mg/L |
| CARUSOL® Liquid Permanganate | Oxidant | 176mg/L |
[1] The finished drinking water should be monitored to ensure that levels of manganese do
not exceed 0.05 mg/L.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Portland, OR
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Univar Coagulant 1160 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide 19% | Chloramination | 10mg/L |
| Ammonium Hydroxide 19% 21BE | Chloramination | 10mg/L |
| Ammonium Hydroxide 29.4% | Chloramination | 10mg/L |
| Ammonium Hydroxide 29.4% 26BE | Chloramination | 10mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37 - 42% | Coagulation & Flocculation | 250mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 10% | Corrosion & Scale Control pH Adjustment |
140mg/L |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 20% | Corrosion & Scale Control pH Adjustment |
69mg/L |
| Hydrochloric Acid 25% | Corrosion & Scale Control pH Adjustment |
56mg/L |
| Hydrochloric Acid 28% | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Hydrochloric Acid 31% | Corrosion & Scale Control pH Adjustment |
45mg/L |
| Hydrochloric Acid 35% | Corrosion & Scale Control pH Adjustment |
40mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| Univar-Coagulant 2402G | Coagulation & Flocculation | 50mg/L |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPAC 2000 | Coagulation & Flocculation | 250mg/L |
| DelPAC 2020 | Coagulation & Flocculation | 250mg/L |
| Delpac 1525 | Coagulation & Flocculation | 250mg/L |
| SternPAC | Coagulation & Flocculation | 250mg/L |
| Univar Coagulant 1850 | Coagulation & Flocculation | 250mg/L |
| Univar Coagulant 1902 | Coagulation & Flocculation | 250mg/L |
| Univar Coagulant 1913 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite 25% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite 38-40% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution 38-40% | Dechlorinator & Antioxidant | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | Corrosion & Scale Control | 333mg/L |
| Caustic Soda 20% | Corrosion & Scale Control | 250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control | 200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control | 165mg/L |
| Caustic Soda 33% | Corrosion & Scale Control | 152mg/L |
| Caustic Soda 35% | Corrosion & Scale Control | 143mg/L |
| Caustic Soda 50% | Corrosion & Scale Control | 100mg/L |
| Vanblend LP 1422 | Corrosion & Scale Control | 200mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 25% | Corrosion & Scale Control | 186mg/L |
| Sulfuric Acid, 30% | Corrosion & Scale Control | 153mg/L |
| Sulfuric Acid, 33% | Corrosion & Scale Control | 141mg/L |
| Sulfuric Acid, 36% | Corrosion & Scale Control | 129mg/L |
| Sulfuric Acid, 50% | Corrosion & Scale Control | 93mg/L |
| Sulfuric Acid, 70% | Corrosion & Scale Control | 66mg/L |
| Sulfuric Acid, 78% | Corrosion & Scale Control | 60mg/L |
| Sulfuric Acid, 93% | Corrosion & Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Altoona, PA
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate, Liquid | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Citric Acid[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 50% | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following the manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPAC 2000 | Coagulation & Flocculation | 250mg/L |
| DelPAC 2020 | Coagulation & Flocculation | 250mg/L |
| Delpac 1525 | Coagulation & Flocculation | 250mg/L |
| SternPAC | Coagulation & Flocculation | 250mg/L |
| Univar Coagulant 1850 | Coagulation & Flocculation | 250mg/L |
| Univar Coagulant 1913 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends |
||
| Trade Designation | Product Function | Max Use |
| Delta-Floc 1107 | Coagulation & Flocculation | 251mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Caustic Potash Liquid | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 10% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% | Disinfection & Oxidation | 45mg/L |
| Liquichlor 5.25% | Disinfection & Oxidation | 107mg/L |
| Sodium Hypochlorite Solution 12.5% | Disinfection & Oxidation | 45mg/L |
| Sodium Hypochlorite Solution 5.25% | Disinfection & Oxidation | 107mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Bunola, PA
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPAC XG | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate, Dry | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate, Liquid | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide | Chloramination | 10mg/L |
| Aqua Ammonia | Chloramination | 10mg/L |
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate 40% | Chloramination | 60mg/L |
| Ammonium Sulfate Solution 40% | Chloramination | 60mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| Aqua Mag | Corrosion & Scale Control Sequestering |
23mg/L |
|
Chlorine[CL] |
||
| Trade Designation | Product Function | Max Use |
| Chlorine | Disinfection & Oxidation | 30mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% DWG | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% TRG | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Drinking Water Grade | Coagulation & Flocculation | 250mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate Solution | Coagulation & Flocculation | 600mg/L |
|
Fluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, Liquid 75-85% | Corrosion & Scale Control | 12mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| AS-2222 | Coagulation & Flocculation | 50mg/L |
| Superfloc C-587 | Coagulation & Flocculation | 50mg/L |
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| SUPERFLOC N1986 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| DV 1740 | Coagulation & Flocculation | 250mg/L |
| DelPAC 1000 | Coagulation & Flocculation | 250mg/L |
| DelPAC 1010 | Coagulation & Flocculation | 250mg/L |
| DelPAC 1012 | Coagulation & Flocculation | 250mg/L |
| DelPAC 1525 | Coagulation & Flocculation | 250mg/L |
| DelPAC 1820 | Coagulation & Flocculation | 250mg/L |
| DelPAC 1842 | Coagulation & Flocculation | 250mg/L |
| DelPAC 2000 | Coagulation & Flocculation | 250mg/L |
| DelPAC 2020 | Coagulation & Flocculation | 250mg/L |
| DelPAC 21 | Coagulation & Flocculation | 250mg/L |
| DelPAC 2100+ | Coagulation & Flocculation | 250mg/L |
| DelPAC 2450 | Coagulation & Flocculation | 250mg/L |
| DelPAC 2500 | Coagulation & Flocculation | 250mg/L |
| DelPAC 3000 | Coagulation & Flocculation | 250mg/L |
| DelPAC 4000 | Coagulation & Flocculation | 250mg/L |
| DelPAC 4040 | Coagulation & Flocculation | 250mg/L |
| DelPAC 6 | Coagulation & Flocculation | 250mg/L |
| DelPAC XG | Coagulation & Flocculation | 250mg/L |
| SternPAC | Coagulation & Flocculation | 250mg/L |
| Unifloc 1730 | Coagulation & Flocculation | 250mg/L |
| Unifloc 1740 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 10% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Caustic Soda 40% | Corrosion & Scale Control pH Adjustment |
125mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% | Disinfection & Oxidation | 45mg/L |
| Liquichlor 5.25% | Disinfection & Oxidation | 107mg/L |
| Sodium Hypochlorite Solution 12.5% | Disinfection & Oxidation | 45mg/L |
| Sodium Hypochlorite Solution 5.25% | Disinfection & Oxidation | 107mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate[PO] |
||
| Trade Designation | Product Function | Max Use |
| CARUSOL® liquid permanganate | Oxidant | 176mg/L |
| Sodium Permanganate Solution | Oxidant | 176mg/L |
[PO] The finished drinking water shall be monitored to ensure that levels of manganese
do not exceed 0.05 mg/L.
|
||
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Silicate, Liquid (all grades) | Corrosion & Scale Control | 25mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 20% | Corrosion & Scale Control pH Adjustment |
223mg/L |
| Sulfuric Acid, 50% | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Sulfuric Acid, 93% | Corrosion & Scale Control pH Adjustment |
50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Morrisville Steel Road, PA
|
Calcium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| UniLime | Precipitation Agent | 1000mg/L |
| UniLime 30% | Precipitation Agent | 1000mg/L |
| UniLime 35% | Precipitation Agent | 1000mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | Corrosion & Scale Control | 69mg/L |
| Hydrochloric Acid 18% | Corrosion & Scale Control | 58mg/L |
| Hydrochloric Acid 31% | Corrosion & Scale Control | 33mg/L |
| Hydrochloric Acid 35% | Corrosion & Scale Control | 30mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 36% | pH Adjustment | 28mg/L |
| Phosphoric Acid 38% | pH Adjustment | 27mg/L |
| Phosphoric Acid 75% | pH Adjustment | 13mg/L |
| Phosphoric Acid 85% | pH Adjustment | 12mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash 45% | pH Adjustment | 100mg/L |
| Caustic Potash 50% | pH Adjustment | 90mg/L |
| Potassium Hydroxide 45% | pH Adjustment | 100mg/L |
| Potassium Hydroxide 50% | pH Adjustment | 90mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite | Dechlorination | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 19% | pH Adjustment | 263mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 20% | pH Adjustment | 233mg/L |
| Sulfuric Acid 25% | pH Adjustment | 186mg/L |
| Sulfuric Acid 33% | pH Adjustment | 141mg/L |
| Sulfuric Acid 36% | pH Adjustment | 129mg/L |
| Sulfuric Acid 50% | pH Adjustment | 93mg/L |
| Sulfuric Acid 70% | pH Adjustment | 66mg/L |
| Sulfuric Acid 78% | pH Adjustment | 60mg/L |
| Sulfuric Acid 93% | pH Adjustment | 50mg/L |
| Sulfuric Acid, 30% | pH Adjustment | 153mg/L |
| Sulfuric Acid, 74% | pH Adjustment | 63mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Philadelphia, PA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | pH Adjustment | 333mg/L |
| Caustic Soda 18% | pH Adjustment | 277mg/L |
| Caustic Soda 20% | pH Adjustment | 250mg/L |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 32% | pH Adjustment | 156mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 15% | pH Adjustment | 333mg/L |
| Sodium Hydroxide 18% | pH Adjustment | 277mg/L |
| Sodium Hydroxide 20% | pH Adjustment | 250mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 32% | pH Adjustment | 156mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Middletown, PA
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPAC XG | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% APX220GL | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate, Dry | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate, Liquid | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| Aqua Mag | Corrosion & Scale Control | 23mg/L |
|
Chlorine[CL] |
||
| Trade Designation | Product Function | Max Use |
| Chlorine | Disinfection & Oxidation | 30mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% DWG | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% TRF | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution - Drinking Water Grade | Coagulation & Flocculation | 250mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate Solution | Coagulation & Flocculation | 600mg/L |
|
Fluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, Liquid 75-85% | Corrosion & Scale Control | 12mg/L |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPAC 2000 | Coagulation & Flocculation | 250mg/L |
| DelPAC 2020 | Coagulation & Flocculation | 250mg/L |
| Delpac 1525 | Coagulation & Flocculation | 250mg/L |
| SternPAC | Coagulation & Flocculation | 250mg/L |
| Univar-Coagulant 1850 | Coagulation & Flocculation | 250mg/L |
| Univar-Coagulant 1913 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends |
||
| Trade Designation | Product Function | Max Use |
| Delta-Floc 801 | Coagulation & Flocculation | 250mg/L |
| Delta-Floc 807 | Coagulation & Flocculation | 252mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash Liquid | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Aluminate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Aluminate 38% | Coagulation & Flocculation | 105mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Reducite | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution, 38-40% | Dechlorinator & Antioxidant | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 10% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Caustic Soda 7% | Corrosion & Scale Control | 700mg/L |
| Sodium Hydroxide 10% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 7% | Corrosion & Scale Control pH Adjustment |
700mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 10% | Disinfection & Oxidation | 75mg/L |
| Liquichlor 12.5% | Disinfection & Oxidation | 60mg/L |
| Liquichlor 5.25% | Disinfection & Oxidation | 142mg/L |
| Liquichlor 9.2% | Disinfection & Oxidation | 81mg/L |
| Sodium Hypochlorite Solution 10% | Disinfection & Oxidation | 75mg/L |
| Sodium Hypochlorite Solution 12.5% | Disinfection & Oxidation | 60mg/L |
| Sodium Hypochlorite Solution 5.25% | Disinfection & Oxidation | 142mg/L |
| Sodium Hypochlorite Solution 9.2% | Disinfection & Oxidation | 81mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Silicate, Liquid | Corrosion & Scale Control | 25mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 20% | pH Adjustment | 233mg/L |
| Sulfuric Acid, 50% | pH Adjustment | 93mg/L |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| Virchem® 970 | Corrosion & Scale Control | 16mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Morrisville, PA
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 50% | Coagulation & Flocculation | 600mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% | pH Adjustment | 13mg/L |
| Phosphoric Acid 85% | pH Adjustment | 12mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash 45% | pH Adjustment | 100mg/L |
| Potassium Hydroxide 45% | pH Adjustment | 100mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Providence, RI
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPac 2020 | Coagulation & Flocculation | 250mg/L |
| DelPac 2500 | Coagulation & Flocculation | 250mg/L |
| DelPac XG | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide | Chloramination | 10mg/L |
| Ammonium hydroxide 19% | Chloramination | 10mg/L |
| Ammonium hydroxide 19% 21BE | Chloramination | 10mg/L |
| Ammonium hydroxide 27% | Chloramination | 10mg/L |
| Ammonium hydroxide 27% 25BE | Chloramination | 10mg/L |
| Ammonium hydroxide 29.4% | Chloramination | 10mg/L |
| Ammonium hydroxide 29.4% 26BE | Chloramination | 10mg/L |
|
Calcium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| UniLime | Precipitation Agent | 1000mg/L |
| UniLime 30% | Precipitation Agent | 1000mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPac 2020 | Coagulation & Flocculation | 250mg/L |
| DelPac 2500 | Coagulation & Flocculation | 250mg/L |
| DelPac XG | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash Liquid | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 10% Solution | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Caustic Soda 25% Solution | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 35% Solution | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Caustic Soda 50% Solution | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 10% | Disinfection & Oxidation | 105mg/L |
| Liquichlor 12.5% | Disinfection & Oxidation | 84mg/L |
| Liquichlor 5.25% | Disinfection & Oxidation | 200mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Spartanburg, SC
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Solution | Coagulation & Flocculation | 150mg/L |
| Liquid Alum | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide | Chloramination | 10mg/L |
| Ammonium Hydroxide 15% | Chloramination | 10mg/L |
| Ammonium Hydroxide 19% | Chloramination | 10mg/L |
| Ammonium Hydroxide 26be | Chloramination | 10mg/L |
| Ammonium Hydroxide 27% | Chloramination | 10mg/L |
| Ammonium Hydroxide 27% 25BE | Chloramination | 10mg/L |
| Ammonium Hydroxide 29.4% | Chloramination | 10mg/L |
| Aqua Ammonia | Chloramination | 10mg/L |
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate Solution 40% | Chloramination | 60mg/L |
|
Citric Acid[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid, 50% Solution | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following the manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% DWG | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% TRF | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride-Drinking Water Grade | Coagulation & Flocculation | 250mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23 - 25% | Fluoridation | 5mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion Control pH Adjustment |
250 mg/L |
| Caustic Soda 25% | Corrosion Control pH Adjustment |
200 mg/L |
| Caustic Soda 32% | Corrosion Control pH Adjustment |
156mg/L |
| Caustic Soda 50% | Corrosion Control pH Adjustment |
100 mg/L |
| Sodium Hydroxide 20% | Corrosion Control pH Adjustment |
250 mg/L |
| Sodium Hydroxide 25% | Corrosion Control pH Adjustment |
200 mg/L |
| Sodium Hydroxide 30-49% | Corrosion Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 32% | Corrosion Control pH Adjustment |
156mg/L |
| Sodium Hydroxide 50% | Corrosion Control pH Adjustment |
100 mg/L |
| Weak Caustic | Corrosion Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% Solution | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Chattanooga, TN
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | pH Adjustment Corrosion & Scale Control |
250mg/L |
| Caustic Soda 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Caustic Soda 30% | pH Adjustment Corrosion & Scale Control |
165mg/L |
| Caustic Soda 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide 20% | pH Adjustment Corrosion & Scale Control |
250mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 30% | pH Adjustment Corrosion & Scale Control |
165mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
Facility : Memphis, TN
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | pH Adjustment Corrosion Control |
250mg/L |
| Caustic Soda 25% | pH Adjustment Corrosion Control |
200mg/L |
| Caustic Soda 30% | pH Adjustment Corrosion Control |
165mg/L |
| Caustic Soda 50% | pH Adjustment Corrosion Control |
100mg/L |
| Sodium Hydroxide 20% | pH Adjustment Corrosion Control |
250mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion Control |
200mg/L |
| Sodium Hydroxide 30% | pH Adjustment Corrosion Control |
165mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion Control |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Borger, TX
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Corpus Christi, TX
|
Polymer Blends[AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| Caflon ICO AB88 | Coagulation & Flocculation | 96mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 20% | Dechlorination | 46mg/L |
| Sodium Bisulfite 38-40% | Dechlorination | 46mg/L |
| Sodium Bisulfite 38-42% | Dechlorination | 46mg/L |
| Sodium Bisulfite 40% | Dechlorination | 46mg/L |
| Sodium Bisulfite 40-43% | Dechlorination | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 10% | Disinfection & Oxidation | 105mg/L |
| Liquichlor 12.5% | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite 10% | Disinfection & Oxidation | 105mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
Facility : Distribution Center - Elmendorf TX
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
NOTE: Only products bearing the NSF Mark designation are Certified by NSF International.
Facility : Distribution Center - Houston, TX
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Basicphresh 50 – Caustic Soda 50% NaOH Bulk | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Caustic Soda - 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda - 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Caustic Soda 20% | pH Adjustment Corrosion & Scale Control |
250mg/L |
| Caustic Soda 27% | pH Adjustment Corrosion & Scale Control |
185mg/L |
| Sodium Hydroxide | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide - 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide - 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | pH Adjustment Corrosion & Scale Control |
250mg/L |
| Sodium Hydroxide 27% | pH Adjustment Corrosion & Scale Control |
185mg/L |
| Sodium Hydroxide Solution | pH Adjustment Corrosion & Scale Control |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Odessa, TX
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center – Saginaw, TX
|
Fluorosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| FSA | Fluoridation | 5mg/L |
| Fluorosilicic Acid | Fluoridation | 5mg/L |
| Fluosilicic Acid | Fluoridation | 5mg/L |
| HFS | Fluoridation | 5mg/L |
| Hexafluorosilicic Acid | Fluoridation | 5mg/l |
| Hexafluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluorosilicic Acid | Fluoridation | 5mf/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Houston, TX
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 10% | pH Adjustment Corrosion & Scale Control |
104mg/L |
| Hydrochloric Acid 15% | pH Adjustment Corrosion & Scale Control |
93mg/L |
| Hydrochloric Acid 20% | pH Adjustment Corrosion & Scale Control |
69mg/L |
| Hydrochloric Acid 25% | pH Adjustment Corrosion & Scale Control |
56mg/L |
| Hydrochloric Acid 28% | pH Adjustment Corrosion & Scale Control |
50mg/L |
| Hydrochloric Acid 31% | pH Adjustment Corrosion & Scale Control |
45mg/L |
| Hydrochloric Acid 35% | pH Adjustment Corrosion & Scale Control |
40mg/L |
Facility : Distribution Center - Clearfield, UT
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Univar Coagulant 1902 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Univar Coagulant 1902 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
Facility : Salt Lake City, UT
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| GC-850 | Coagulation & Flocculation | 250mg/L |
| Univar-Coagulant 1160 | Coagulation & Flocculation | 250mg/L |
| Univar-Coagulant 1902 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Citric Acid |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 50% Solution[1] [2] | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 30% | pH Adjustment | 165mg/L |
| Caustic Soda 35% | pH Adjustment | 143mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
| Sodium Hydroxide 25% | pH Adjustment | 200mg/L |
| Sodium Hydroxide 30% | pH Adjustment | 165mg/L |
| Sodium Hydroxide 35% | pH Adjustment | 143mg/L |
| Sodium Hydroxide 50% | pH Adjustment | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Chester, VA
|
Aluminum Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate Solution | Coagulation & Flocculation | 150mg/L |
| DSR-17 | Coagulation & Flocculation | 150mg/L |
| Liquid Alum | Coagulation & Flocculation | 150mg/L |
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide 10% | Chloramination | 10mg/L |
| Aqua Ammonia 10% | Chloramination | 10mg/L |
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate 40% | Chloramination | 60mg/L |
| Ammonium Sulfate RTU 40% | Chloramination | 60mg/L |
| Ammonium Sulfate Solution 40% | Chloramination | 60mg/L |
|
Calcium Chloride |
||
| Trade Designation | Product Function | Max Use |
| 32% Calcium Chloride | Softener Defluoridation |
200mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% DWG | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% TRF | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride-Drinking Water Grade | Coagulation & Flocculation | 250mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid (23-25%) | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid (37-42%) | Fluoridation | 3mg/L |
|
Miscellaneous Water Supply Products[1] |
||
| Trade Designation | Product Function | Max Use |
| Caflon P-RO 12.0 | Membrane Cleaner | NA |
| Caflon P-RO 3.0 | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| Univar Flocculant 3004B | Coagulation & Flocculation | 2mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPac 1525 | Coagulation & Flocculation | 250mg/L |
| DelPac 2020 | Coagulation & Flocculation | 250mg/L |
| Univar-Coagulant 1850 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion Control pH Adjustment |
200mg/L |
| Caustic Soda 32% | Corrosion Control pH Adjustment |
156mg/L |
| Caustic Soda 50% | Corrosion Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 32% | Corrosion Control pH Adjustment |
156mg/L |
| Sodium Hydroxide 50% | Corrosion Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 10% | Disinfection & Oxidation | 105mg/L |
| Liquichlor 12.5% | Disinfection & Oxidation | 58mg/L |
| Liquichlor 5.25% | Disinfection & Oxidation | 138mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 66 | Scale Control | 50mg/L |
| Sulfuric Acid 93% | Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Newport News, VA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 32% | Corrosion & Scale Control pH Adjustment |
156mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 32% | Corrosion & Scale Control pH Adjustment |
156mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Vancouver, WA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | Corrosion & Scale Control | 333mg/L |
| Caustic Soda 20% | Corrosion & Scale Control | 250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control | 200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control | 165mg/L |
| Caustic Soda 50% | Corrosion & Scale Control | 100mg/L |
| Sodium Hydroxide 15% | Corrosion & Scale Control | 333mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control | 250mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control | 200mg/L |
| Sodium Hydroxide 30% | Corrosion & Scale Control | 165mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center – Spokane, WA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda - 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Caustic Soda - 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
| Sodium Hydroxide - 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide - 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Kent, WA
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Univar Coagulant 1160 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 10% | Corrosion & Scale Control pH Adjustment |
140mg/L |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
93mg/L |
| Hydrochloric Acid 20% | Corrosion & Scale Control pH Adjustment |
69mg/L |
| Hydrochloric Acid 25% | Corrosion & Scale Control pH Adjustment |
56mg/L |
| Hydrochloric Acid 28% | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Hydrochloric Acid 31% | Corrosion & Scale Control pH Adjustment |
45mg/L |
| Hydrochloric Acid 35% | Corrosion & Scale Control pH Adjustment |
40mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Bisulfite |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite 38-40% | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution | Dechlorinator & Antioxidant | 46mg/L |
| Sodium Bisulfite Solution 38-40% | Dechlorinator & Antioxidant | 46mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 15% | Corrosion & Scale Control | 333mg/L |
| Caustic Soda 20% | Corrosion & Scale Control | 250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control | 200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control | 165mg/L |
| Caustic Soda 33% | Corrosion & Scale Control | 152mg/L |
| Caustic Soda 35% | Corrosion & Scale Control | 143mg/L |
| Caustic Soda 50% | Corrosion & Scale Control | 100mg/L |
| Vanblend LP 1422 | Corrosion & Scale Control | 200mg/L |
|
Sodium Hypochlorite |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 12.5% | Disinfection & Oxidation | 84 mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 25% | Corrosion & Scale Control | 186mg/L |
| Sulfuric Acid, 30% | Corrosion & Scale Control | 153mg/L |
| Sulfuric Acid, 33% | Corrosion & Scale Control | 141mg/L |
| Sulfuric Acid, 36% | Corrosion & Scale Control | 129mg/L |
| Sulfuric Acid, 50% | Corrosion & Scale Control | 93mg/L |
| Sulfuric Acid, 70% | Corrosion & Scale Control | 66mg/L |
| Sulfuric Acid, 78% | Corrosion & Scale Control | 60mg/L |
| Sulfuric Acid, 93% | Corrosion & Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Cincinnati Dues Drive, OH
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Chlorohydrate Solution | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48% | Coagulation & Flocculation | 150mg/L |
| Liquid Alum | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonia, Anhydrous |
||
| Trade Designation | Product Function | Max Use |
| Anhydrous Ammonia | Chloramination | 5mg/L |
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide 19% | Chloramination | 10mg/L |
| Ammonium Hydroxide 29.4% | Chloramination | 10mg/L |
| Aqua Ammonia | Chloramination | 10mg/L |
|
Blended Phosphates[ZN] |
||
| Trade Designation | Product Function | Max Use |
| Liquid Polyphos | Corrosion Control Sequestering |
20mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
|
Chlorine[CL] |
||
| Trade Designation | Product Function | Max Use |
| Liquid Chlorine | Disinfection & Oxidation | 30mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% DWG | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride 37-42% TRF | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate Solution | Coagulation & Flocculation | 600mg/L |
| LIQUID FERRI-FLOC | Coagulation & Flocculation | 600mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| HCL 15% | pH Adjustment | 93mg/L |
| HCL 31% | pH Adjustment | 45mg/L |
| HCL 35% | pH Adjustment | 40mg/L |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 31% | pH Adjustment | 45mg/L |
| Hydrochloric Acid 35% | pH Adjustment | 40mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| HFS Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid | Fluoridation | 5mg/L |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
|
Hydrogen Peroxide[HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide 10% | Oxidant Dechlorination |
10mg/L |
| Hydrogen Peroxide 20% | Dechlorination Oxidant |
5.2mg/L |
| Hydrogen Peroxide 25% | Oxidant Dechlorination |
4.2mg/L |
| Hydrogen Peroxide 30% | Oxidant Dechlorination |
3.5mg/L |
| Hydrogen Peroxide 35% | Oxidant Dechlorination |
3mg/L |
| Hydrogen Peroxide 50% | Oxidant Dechlorination |
2.1mg/L |
| Hydrogen Peroxide 7% | Oxidant Dechlorination |
15mg/L |
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| DelPAC 2020 | Coagulation & Flocculation | 250mg/L |
| DelPAC 2500 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Carbonate |
||
| Trade Designation | Product Function | Max Use |
| Soda Ash 15% Solution | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Soda Ash 8% | Corrosion & Scale Control pH Adjustment |
1250mg/L |
| Soda Ash 8% Solution | Corrosion & Scale Control pH Adjustment |
1250mg/L |
| Sodium Carbonate 15% Solution | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Carbonate 8% Solution | Corrosion & Scale Control pH Adjustment |
1250mg/L |
|
Sodium Chlorite [CL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Chlorite 31.25%[1] | Disinfection & Oxidation | 21mg/L |
[1] These products may be used in chlorine dioxide generators. The generators should comply
with the requirements of NSF/ANSI/CAN 61.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 10% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Caustic Soda 12.5% | Corrosion & Scale Control pH Adjustment |
400mg/L |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda 35% | Corrosion & Scale Control pH Adjustment |
143mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 10% Solution | Disinfection & Oxidation | 75mg/L |
| Liquichlor 12.5% Solution | Disinfection & Oxidation | 60mg/L |
| Liquichlor 5.25% Solution | Disinfection & Oxidation | 142mg/L |
| Sodium Hypochlorite Solution 12.5% | Disinfection & Oxidation | 60mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hexametaphosphate 30% | Corrosion & Scale Control | 37mg/L |
| Sodium Hexametaphosphate 35% | Corrosion & Scale Control | 22mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 66 | pH Adjustment | 50mg/L |
| Sulfuric Acid 93% | pH Adjustment | 50mg/L |
| Sulfuric Acid, Drinking Water Grade | pH Adjustment | 50mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| TKPP 60% | Sequestering | 29mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Dallas Bekay Street, TX
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 50% | Coagulation & Flocculation | 600mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
80mg/L |
| Hydrochloric Acid 18% | Corrosion & Scale Control pH Adjustment |
70mg/L |
| Hydrochloric Acid 31% | Corrosion & Scale Control pH Adjustment |
45mg/L |
| Hydrochloric Acid 35% | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Hydrochloric Acid 7% | Corrosion & Scale Control pH Adjustment |
200mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, Liquid (75% - 85%) | Corrosion & Scale Control | 12mg/L |
|
Sodium Bisulfite |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 40%[1] | Dechlorination | 50mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Basicphresh 50 – Caustic Soda 50% NaOH Bulk | pH Adjustment Corrosion Control |
100mg/L |
| Caustic Soda 20% | Corrosion Control pH Adjustment |
250mg/L |
| Caustic Soda 25% | Corrosion Control pH Adjustment |
200mg/L |
| Caustic Soda 50% | Corrosion Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 20% | Corrosion Control pH Adjustment |
250mg/L |
| Sodium Hydroxide 25% | Corrosion Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 50% | Corrosion Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid, 93% | pH Adjustment | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Distribution Center - Oklahoma City
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | Corrosion & Scale Control | 50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Houston, TX
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Univar Coagulant 1160 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| ALUMINUM SULFATE 48% | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate Solution 40% | Chloramination | 60mg/L |
|
Citric Acid[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 50% Solution | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Hydroxyethylidene Diphosphonic Acid |
||
| Trade Designation | Product Function | Max Use |
| Caflon PP2010 | Distillation Antiscalant Reverse Osmosis Antiscalant |
10mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| CAFLON SAFE ACID 6 | Distillation Antiscalant Reverse Osmosis Antiscalant |
80mg/L |
| Caflon RO Scale Inhibitor 18 | Reverse Osmosis Antiscalant | 40mg/L |
|
Miscellaneous Water Supply Products[1] |
||
| Trade Designation | Product Function | Max Use |
| Caflon P-RO 12.0 | Membrane Cleaner | NA |
| Caflon P-RO 3.0 | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid, 75% | Corrosion & Scale Control | 13mg/L |
|
Sodium Bisulfite |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 30% | Dechlorination | 50mg/L |
| Sodium Bisulfite 38-40% | Dechlorination | 46mg/L |
| Sodium Bisulfite 40% | Dechlorination | 46mg/L |
|
Sodium Carbonate |
||
| Trade Designation | Product Function | Max Use |
| Soda Ash Dense | pH Adjustment | 100mg/L |
| Soda Ash Light | pH Adjustment | 100mg/L |
| Sodium Carbonate | pH Adjustment | 100 mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 20% | Corrosion & Scale Control pH Adjustment |
250 mg/L |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200 mg/L |
| Caustic Soda 50% | Corrosion & Scale Control pH Adjustment |
100 mg/L |
| Sodium Hydroxide 20% | Corrosion & Scale Control pH Adjustment |
250 mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200 mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100 mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Liquichlor 10% Solution | Disinfection & Oxidation | 65 mg/L |
| Liquichlor 12.5% Solution | Disinfection & Oxidation | 52 mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Sulfuric Acid 93% 66BE | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Sulfuric Acid 98% | Corrosion & Scale Control pH Adjustment |
50mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Facility : Phoenix 45th Avenue, AZ
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 31% | pH Adjustment | 40mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 25% | Dechlorination | 46mg/L |
| Sodium Bisulfite 38% | Dechlorination | 46mg/L |
| Sodium Bisulfite 39% | Dechlorination | 46mg/L |
| Sodium Bisulfite 40% | Dechlorination | 46mg/L |
| Sodium Bisulfite 41% | Dechlorination | 46mg/L |
| Sodium Bisulfite 42% | Dechlorination | 46mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | pH Adjustment | 200mg/L |
| Caustic Soda 50% | pH Adjustment | 100mg/L |
NOTE: Only products bearing the "NSF 60" designation are Certified by NSF International.
Number of matching Manufacturers is 1
Number of matching Products is 1217
Processing time was 0 seconds
