NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=09130&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| ChemTreat, Inc. | |
| 5640 Cox Road | |
| Glen Allen, VA 23060 | |
| United States | |
| 800-442-8292 | |
| 804-935-2311 | |
| Visit this company's website |
Facility : Eldridge, IA
|
Aluminum Chlorohydrate [AL] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P891L | Coagulation & Flocculation | 250mg/L |
| ChemTreat P901L | Coagulation & Flocculation | 250mg/L |
| ChemTreat RL401[1] | Other | 250mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and SDI.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Corrosion Inhibitor |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CL1439 | Corrosion & Scale Control Sequestering |
30mg/L |
| ChemTreat CL1495N | Corrosion Control | 30mg/L |
| ChemTreat CL1496 | Corrosion & Scale Control | 10mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| CHEMTREAT RL9006 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat BL1240 | Dechlorination | 30mg/L |
| ChemTreat CL4635 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat CT704 | Corrosion & Scale Control | 100mg/L |
| ChemTreat RL100 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL1259[2] | Dechlorination | 70mg/L |
| ChemTreat RL704 | Reverse Osmosis Antiscalant | 100mg/L |
| ChemTreat RL9002 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat RL9003 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9004 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9005 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9007 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9008 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9009 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9043 | Reverse Osmosis Antiscalant | 45mg/L |
| ChemTreat RL9904 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9906 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9907 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9909 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9913 | Reverse Osmosis Antiscalant | 25mg/L |
| ChemTreat RL9917 | Reverse Osmosis Antiscalant | 12mg/L |
| ChemTreat RL9924 | Reverse Osmosis Antiscalant | 50mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Miscellaneous Water Supply Products |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CL16[3] [4] | Membrane Cleaner | NA |
| ChemTreat CL416[3] [4] | Membrane Cleaner | NA |
| ChemTreat CT775 | Corrosion Control | 13mg/L |
| ChemTreat CT9001 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL100[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1000[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1500[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1600 | Membrane Cleaner | NA |
| ChemTreat RL1700[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL2016[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL2017[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL3000[3] | Membrane Cleaner | NA |
| ChemTreat RL5000[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL9075 | Reverse Osmosis Antiscalant | 65mg/L |
| ChemTreat SS16[3] [4] | Membrane Cleaner | NA |
[3] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[4] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P873L | Coagulation & Flocculation | 50mg/L |
| ChemTreat RL120[1] | Other | 50mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and SDI.
|
||
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL700 | Filtration Aid | 100mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P890L | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends [AL] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL600[1] | Other | 500mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and SDI.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL124 | Dechlorination | 50mg/L |
| ChemTreat RL1245 | Dechlorination | 100mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat BL1301 | pH Adjustment | 100mg/L |
| ChemTreat RL1302 | Corrosion & Scale Control | 200mg/L |
| ChemTreat RL1309 | pH Adjustment | 10mg/L |
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT708 | Corrosion & Scale Control | 37mg/L |
| ChemTreat FB708 | Corrosion & Scale Control | 37mg/L |
| Chemtreat CT55 | Corrosion & Scale Control | 11mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL561 | pH Adjustment | 50mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT709 | Corrosion & Scale Control | 29mg/L |
|
Zinc Chloride[ZN] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT62 | Corrosion & Scale Control | 6mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT781 | Corrosion & Scale Control | 23mg/L |
| ChemTreat CT781C | Corrosion & Scale Control | 23mg/L |
| ChemTreat CT788 | Corrosion & Scale Control | 27mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
[5] Certified for use as an off-line membrane cleaner. When used as an off-line membrane
cleaner, this product is designed to be flushed out prior to using the system for
drinking water. Follow manufacturer's use instructions.
NOTE: All Listed BL1240 is NSF Certified, whether or not it bears the NSF Mark.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Nederland, TX
|
Aluminum Chlorohydrate [AL] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P891L | Coagulation & Flocculation | 250mg/L |
| ChemTreat P901L | Coagulation & Flocculation | 250mg/L |
| ChemTreat RL401[1] | Other | 250mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and the Silt Density Index (SDI) value.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Corrosion Inhibitor |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CL1439 | Corrosion & Scale Control Sequestering |
30mg/L |
| ChemTreat CL1495N | Corrosion Control | 30mg/L |
| ChemTreat CL1496 | Corrosion & Scale Control | 10mg/L |
|
Miscellaneous Treatment Applications |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL9017 | Reverse Osmosis Antiscalant | 12mg/L |
| ChemTreat RL9910PF | Reverse Osmosis Antiscalant | 30mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| CHEMTREAT RL9006 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat BL1240 | Dechlorination | 30mg/L |
| ChemTreat CL4635 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat CT704 | Corrosion & Scale Control | 100mg/L |
| ChemTreat RL 9012 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat RL 9013 | Reverse Osmosis Antiscalant | 25mg/L |
| ChemTreat RL100 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL1254[2] | Dechlorination | 25mg/L |
| ChemTreat RL1259[2] | Dechlorination | 70mg/L |
| ChemTreat RL704 | Reverse Osmosis Antiscalant | 100mg/L |
| ChemTreat RL9002 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat RL9003 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9004 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9005 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9007 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9008 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9009 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9043 | Reverse Osmosis Antiscalant | 45mg/L |
| ChemTreat RL9093 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9904 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9906 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9907 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9909 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9913 | Reverse Osmosis Antiscalant | 25mg/L |
| ChemTreat RL9917 | Reverse Osmosis Antiscalant | 12mg/L |
| ChemTreat RL9943 | Reverse Osmosis Antiscalant | 15mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Miscellaneous Water Supply Products |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CL16[3] [4] | Membrane Cleaner | NA |
| ChemTreat CL416[3] [4] | Membrane Cleaner | NA |
| ChemTreat CT9001 | Reverse Osmosis Antiscalant | 5 mg/L |
| ChemTreat RL100[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1000[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1500[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1600 | Membrane Cleaner | NA |
| ChemTreat RL1700[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1750[3] | Membrane Cleaner | NA |
| ChemTreat RL2016[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL2017[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL2032[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL3000[3] | Membrane Cleaner | NA |
| ChemTreat RL3400[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL5000[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL9008 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9075 | Reverse Osmosis Antiscalant | 65mg/L |
| ChemTreat SS16[3] [4] | Membrane Cleaner | NA |
[3] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[4] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT775 | Corrosion Control | 13mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P873K | Coagulation & Flocculation | 50mg/L |
| ChemTreat P873L | Coagulation & Flocculation | 50mg/L |
| ChemTreat RL120[1] | Other | 50mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and the Silt Density Index (SDI) value.
|
||
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL700 | Filtration Aid | 100mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P890L | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends [AL] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P893L | Coagulation & Flocculation | 20mg/L |
| ChemTreat RL600[1] | Other | 500mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and the Silt Density Index (SDI) value.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL124 | Dechlorination | 50mg/L |
| ChemTreat RL1245 | Dechlorination | 100mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat BL1301 | pH Adjustment | 100mg/L |
| ChemTreat RL1302 | Corrosion & Scale Control | 200mg/L |
| ChemTreat RL1309 | pH Adjustment | 10mg/L |
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT55 | Sequestering | 11 mg/L |
| ChemTreat CT708 | Corrosion & Scale Control | 37 mg/L |
| ChemTreat FB708 | Corrosion & Scale Control | 37 mg/L |
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT70 | Corrosion Control Scale Control |
42mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL561 | pH Adjustment | 50mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT709 | Corrosion Control | 29 mg/L |
|
Zinc Chloride[ZN] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT62 | Corrosion & Scale Control | 6 mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT781 | Corrosion & Scale Control | 23 mg/L |
| ChemTreat CT781C | Corrosion & Scale Control | 23mg/L |
| ChemTreat CT788 | Corrosion & Scale Control | 27 mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
[5] Certified for use as an off-line membrane cleaner. When used as an off-line membrane
cleaner, this product is designed to be flushed out prior to using the system for
drinking water. Follow manufacturer's use instructions.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
NOTE: All Listed BL1240 is NSF Certified, whether or not it bears the NSF Mark.
Facility : Salt Lake City, UT
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL9003 | Reverse Osmosis Antiscalant | 20mg/L |
Facility : Ashland, VA
|
Aluminum Chlorohydrate [AL] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P891L | Coagulation & Flocculation | 250mg/L |
| ChemTreat P901L | Coagulation & Flocculation | 250mg/L |
| ChemTreat RL401[1] | Other | 250mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and SDI.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Corrosion Inhibitor |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CL1439 | Corrosion & Scale Control Sequestering |
30mg/L |
| ChemTreat CL1495N | Corrosion Control | 30mg/L |
| ChemTreat CL1496 | Corrosion & Scale Control | 10mg/L |
|
Miscellaneous Treatment Applications |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL9017 | Reverse Osmosis Antiscalant | 12mg/L |
| ChemTreat RL9905 | Reverse Osmosis Antiscalant | 20mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| CHEMTREAT RL9006 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat BL1240 | Dechlorination | 30mg/L |
| ChemTreat CL4635 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat CT704 | Corrosion & Scale Control | 100mg/L |
| ChemTreat RL 9012 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat RL 9013 | Reverse Osmosis Antiscalant | 25mg/L |
| ChemTreat RL1254[2] | Dechlorination | 25mg/L |
| ChemTreat RL704 | Reverse Osmosis Antiscalant | 100mg/L |
| ChemTreat RL9002 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat RL9003 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9004 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9005 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9007 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9008 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9009 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9011 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9014 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9043 | Reverse Osmosis Antiscalant | 45mg/L |
| ChemTreat RL9093 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9158 | Reverse Osmosis Antiscalant | 10mg/L |
| ChemTreat RL9904 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9906 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9907 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9909 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9973 | Reverse Osmosis Antiscalant | 45mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Miscellaneous Water Supply Products |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CL16[3] [4] | Membrane Cleaner | NA |
| ChemTreat CL416[3] [4] | Membrane Cleaner | NA |
| ChemTreat CT775 | Corrosion Control | 13mg/L |
| ChemTreat CT9001 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat R2050 | Membrane Cleaner | NA |
| ChemTreat RL100[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL100 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL1000[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1500[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1600 | Membrane Cleaner | NA |
| ChemTreat RL1700[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL1750[3] | Membrane Cleaner | NA |
| ChemTreat RL2016[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL2017[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL3000[3] | Membrane Cleaner | NA |
| ChemTreat RL3400[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL5000[3] [4] | Membrane Cleaner | NA |
| ChemTreat RL9008 | Reverse Osmosis Antiscalant | 20mg/L |
| ChemTreat RL9075 | Reverse Osmosis Antiscalant | 65mg/L |
| ChemTreat RL9151 | Reverse Osmosis Antiscalant | 15mg/L |
| ChemTreat RL9917 | Reverse Osmosis Antiscalant | 12mg/L |
| ChemTreat SS16[3] [4] | Membrane Cleaner | NA |
[3] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[4] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P873K | Coagulation & Flocculation | 50mg/L |
| ChemTreat P873L | Coagulation & Flocculation | 50 mg/L |
| ChemTreat RL120[1] | Other | 50mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and SDI.
|
||
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL700 | Filtration Aid | 100mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P890L | Coagulation & Flocculation | 250 mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends [AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat P893L[CP] | Coagulation & Flocculation | 20mg/L |
| ChemTreat RL600[1] | Other | 500mg/L |
[1] This product is to be applied upstream from an RO system for the purpose of reducing
turbidity, color and SDI.
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL1304 | pH Adjustment | 200mg/L |
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL124 | Dechlorination | 50mg/L |
| ChemTreat RL1245 | Dechlorination | 100mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat BL1301 | pH Adjustment | 100mg/L |
| ChemTreat RL1302 | Corrosion & Scale Control | 200mg/L |
| ChemTreat RL1309 | pH Adjustment | 10mg/L |
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT708 | Corrosion & Scale Control | 37 mg/L |
| ChemTreat FB708 | Corrosion & Scale Control | 37 mg/L |
| Chemtreat CT55 | Corrosion & Scale Control | 11mg/L |
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT70 | Corrosion Control Scale Control |
42mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat RL561 | pH Adjustment | 50mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT709 | Corrosion Control | 29 mg/L |
|
Zinc Chloride[ZN] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT62 | Corrosion & Scale Control | 6mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| ChemTreat CT781 | Corrosion & Scale Control | 23 mg/L |
| ChemTreat CT788 | Corrosion & Scale Control | 27 mg/L |
| ChemTreat CT790N | Corrosion & Scale Control | 15mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
[5] Certified for use as an off-line membrane cleaner. When used as an off-line membrane
cleaner, this product is designed to be flushed out prior to using the system for
drinking water. Follow manufacturer's use instructions.
NOTE: All Listed BL1240 & BL1301 are NSF Certified, whether or not they bear the NSF Mark.
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 216
Processing time was 0 seconds
