NSF Product and Service Listings

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.

[2] The Certification of this product has been restricted to a maximum use level (MUL) that
    is less than the 10 ppm typical use level of chlorine specified for hypochlorite
    products under NSF/ANSI/CAN 60.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[2] This product functions as a tank and filter cleaner.
[3] This product has not been evaluated by NSF International as a disinfectant or
    bactericide.
[4] This product is used to remove residual grease from water storage tanks.
[5] This product also functions as a media bed bio-growth remover.
[6] This product is designed to be flushed out prior to using the system for drinking water.
     The pipe is to be properly flushed and drained before being placed into service. 
    Follow the manufacturer's use instructions.
[7] This product is authorized for use as a filtration media cleaning aid.  Filters should
    be disconnected from service prior to the use of this product.  After cleaning, at least
    a 500-fold excess of backwash water should be used to flush the product from the system.
     Follow manufacturer's use instructions.
[8] This product is authorized for use as a filtration media cleaning aid.  Filters should
    be disconnected from service prior to the use of this product.  After cleaning, the
    system should be backwashed with at least 3454 Liters of water.  Follow manufacturer's
    use instructions.
[9] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[10] This product is designed to be used following the tank or filter cleaning process.

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[2] This product functions as a tank and filter cleaner.
[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[4] This product has not been evaluated by NSF International as a disinfectant or
    bactericide.
[5] This product also functions as a media bed bio-growth remover.
[6] This product may be used in conjunction with Top Ultra®, Filter Fit®, CSR Plus® LF, CSR
    Plus®, Media Master®, Media Master® RR, and Floran® Biogrowth Remover.
[7] This product is designed to be flushed out prior to using the system for drinking water.
    The pipe is to be properly flushed and drained before being placed into service. Follow
    the manufacturer's use instructions.