NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, November 13, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=0X240&Standard=060&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
Reliable Industrial Supply Ltd. 
50 Mumford Road
Lively, ON P3Y 1L2 
Canada 
705-692-2959

Facility : Lively, Ontario, Canada


Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Aluminum Sulphate 48% Solution Coagulation & Flocculation 150mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Calcium Thiosulfate[1]
Trade Designation Product Function Max Use
Calcium Thiosulfate Dechlorination
Ozone Reduction		 50mg/L 

[1] This product is to be used for the destruction of residual chlorine. It should be
    applied only to the extent necessary to ensure chlorine removal. Actual chlorine
    concentration in the water should be used to calculate the necessary dose of calcium
    thiosulfate.

Ferric Sulfate
Trade Designation Product Function Max Use
Ferric Sulfate Coagulation & Flocculation 600mg/L
Ferric Sulphate Coagulation & Flocculation 600mg/L

Hydrofluosilicic Acid
Trade Designation Product Function Max Use
Fluorosilicic Acid Fluoridation 5mg/L
Hydrofluosilicic Acid Fluoridation 5mg/L

Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Hydrogen Peroxide 29% Disinfection & Oxidation
Oxidant		 3.5mg/L
Hydrogen Peroxide 35% Disinfection & Oxidation
Oxidant		 3.5mg/L 

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

Polyaluminum Chloride[AL]
Trade Designation Product Function Max Use
Poly Aluminum Chloride Coagulation & Flocculation 250mg/L
Polyaluminum Hydroxychloride Coagulation & Flocculation 250mg/L
Reliable MP2 Coagulation & Flocculation 250mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Sodium Bisulfite
Trade Designation Product Function Max Use
Sodium Bisulfite[2] Antioxidant
Dechlorination		 50mg/L 

[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).

Sodium Carbonate
Trade Designation Product Function Max Use
Soda Ash Dense Corrosion & Scale Control
pH Adjustment		 100mg/L
Soda Ash Light Corrosion & Scale Control
pH Adjustment		 100mg/L

Sodium Hydroxide
Trade Designation Product Function Max Use
Caustic Soda 25% Solution Corrosion & Scale Control
pH Adjustment		 200mg/L
Caustic Soda 34% Solution Corrosion & Scale Control
pH Adjustment		 147mg/L
Caustic Soda 50% Solution Corrosion & Scale Control
pH Adjustment		 100mg/L
Caustic Soda Micropearls Corrosion & Scale Control
pH Adjustment		 100mg/L
Sodium Hydroxide 25% Solution Corrosion & Scale Control
pH Adjustment		 200mg/L
Sodium Hydroxide 34% Solution Corrosion & Scale Control
pH Adjustment		 147mg/L
Sodium Hydroxide 50% Solution Corrosion & Scale Control
pH Adjustment		 100mg/L
Sodium Hydroxide, Solid Micropearls Corrosion & Scale Control
pH Adjustment		 100mg/L

Sodium Hypochlorite[HY]
Trade Designation Product Function Max Use
Jex-12 Disinfection & Oxidation 68mg/L
Jex-19 Disinfection & Oxidation 47mg/L
Jex-5 Disinfection & Oxidation 136mg/L
Sodium Hypochlorite 12% Disinfection & Oxidation 68mg/L
Sodium Hypochlorite, 19% Disinfection & Oxidation 47mg/L
Sodium Hypochlorite, 5% Disinfection & Oxidation 136mg/L 

[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations. Also,
     reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
     Storage of Hypochlorite Solutions appendix for information on preservation techniques
     for hypochlorite bleach in transit and storage.

Number of matching Manufacturers is 1
Number of matching Products is 28
Processing time was 0 seconds