NSF Product and Service Listings
These NSF Official Listings are current as of Sunday, November 9, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=19720&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Kurita Europe GmbH |  |
| Theodor-Heuss-Anlage 5 | |
| 68165 Mannheim | |
| Germany | |
| 49 621 1218 3000 | |
| Visit this company's website |
Facility : Ludwigshafen, Rheinland-Pfalz, Germany
|
Aminotrimethylene Phosphonic Acid |
||
| Trade Designation | Product Function | Max Use |
| Osmotech 1065 | Reverse Osmosis Antiscalant | 77mg/L |
| Vitec 1060 | Reverse Osmosis Antiscalant | 30mg/L |
| Vitec 1070 | Reverse Osmosis Antiscalant | 15mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| Vitec 1061[1] | Distillation Antiscalant Reverse Osmosis Antiscalant |
15mg/L |
| Vitec 1135 | Reverse Osmosis Antiscalant | 210mg/L |
| Vitec 1141 | Reverse Osmosis Antiscalant | 30mg/L |
[1] Only products bearing the NSF Mark on the product, product packaging,
and/or documentation shipped with the product are Certified.
|
||
|
Miscellaneous Water Supply Products |
||
| Trade Designation | Product Function | Max Use |
| Kuriverter IK-110[2] [CL] | Other | 100mg/L |
| Kuriverter RC[3] [4] [5] | Other | NA |
| Turbodispin D 180 | Reverse Osmosis Antiscalant | 15mg/L |
| Vitec 1800 | Reverse Osmosis Antiscalant | 15mg/L |
[2] This product is designed to reduce biofilm on reverse osmosis membranes.
[3] This product is used to improve the rejection ratio and flux of deteriorated RO
membranes.
[4] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[5] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
Number of matching Manufacturers is 1
Number of matching Products is 10
Processing time was 0 seconds
