NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=1C110&Standard=060&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
EnviroTech Chemical Services, Inc. 
500 Winmoore Way
Modesto, CA 95358 
United States 
888-563-2254 
209-581-9576
Visit this company's website

Facility : Helena, AR


Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Hydrogen Peroxide 27% Oxidant 3mg/L
Hydrogen Peroxide 34% Oxidant 3mg/L 

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

Miscellaneous Water Supply Products[1] [2] [3]
Trade Designation Product Function Max Use
Bioside HS 15% Membrane Cleaner NA
BromMax 7.1 Membrane Cleaner NA
Perasan A Membrane Cleaner NA
REFLEX™ Membrane Cleaner NA 

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[3] Drain and flush system until hydrogen peroxide and peracetic acid concentrations fall
    below 1 ppm.

Sodium Chlorite[CL]
Trade Designation Product Function Max Use
SureCide AH Bactericide
Chlorine Dioxide Production		 11mg/L 

[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.


Facility : Modesto, CA


Hydrogen Peroxide
Trade Designation Product Function Max Use
Hydrogen Peroxide 15% Oxidant 3.5mg/L
Hydrogen Peroxide 34% Oxidant 3mg/L
Hydrogen Peroxide 50% Oxidant 2.1mg/L

Miscellaneous Treatment Chemical
Trade Designation Product Function Max Use
Bioside HS 15%[2] Membrane Cleaner
Reverse Osmosis Antiscalant		 30mg/L 

[2] This product is designed to be used upstream of a carbon absorption system. Use of this
    product shall be followed by chlorination to remove trace levels of hydrogen peroxide.

Miscellaneous Water Supply Products
Trade Designation Product Function Max Use
ECO9000[1] Other NA
Perasan A[3] [4] [5] Membrane Cleaner NA
REFLEX™[3] [4] [5] Membrane Cleaner NA 

[1] ECO 9000 is used offline to remove deposits from water tank surfaces.  It is used in a
    10:1 ratio at a rate of 60 mg/L with Hydrogen Peroxide 34%.  The tank is rinsed to
    remove any residual product before returning to service.
[3] These products are designed to be used off-line and flushed out prior to using the
    system for drinking water, following manufacturer's use instructions.
[4] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.
[5] Drain and flush system until the hydrogen peroxide and peracetic acid concentrations
    fall below 1 ppm.

Sodium Chlorite[CL]
Trade Designation Product Function Max Use
SureCide AH Chlorine Dioxide Production
Bactericide		 11mg/L 

[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations.

Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was 0 seconds