NSF Product and Service Listings
These NSF Official Listings are current as of Friday, January 30, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=1T080&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| SNF SA | |
| ZAC de Milieux | |
| 42163 Andrezieux | |
| France | |
| 33 47 736 8600 | |
| Visit this company's website |
Facility : # 3 France
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| FLOQUAT™ PAC 18 PWG | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends |
||
| Trade Designation | Product Function | Max Use |
| FLOQUAT™ FLB 1725 PWG[1] | Coagulation & Flocculation | 90mg/L |
| FLOQUAT™ FLB 1740 PWG[1] | Coagulation & Flocculation | 50mg/L |
| FLOQUAT™ FLB 1750 PWG[1] | Coagulation & Flocculation | 37mg/L |
| FLOQUAT™ FLB 4505 PWG | Coagulation & Flocculation | 253mg/L |
| FLOQUAT™ FLB 4525 PWG | Coagulation & Flocculation | 185mg/L |
| FLOQUAT™ FLB 4540 PWG | Coagulation & Flocculation | 106mg/L |
| FLOQUAT™ FLB 4550 PWG | Coagulation & Flocculation | 79mg/L |
[1] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
Facility : Andrézieux, France
|
Miscellaneous Corrosion Chemicals |
||
| Trade Designation | Product Function | Max Use |
| FLOSPERSE™ 1000 A W20 PWG | Reverse Osmosis Antiscalant | 16mg/L |
| FLOSPERSE™ 1000 A PWG | Descaler Scale Control |
20mg/L |
| FLOSPERSE™ 3024 CS A50 PWG | Descaler Scale Control |
20mg/L |
| FLOSPERSE™ 9037 CS A 50 PWG | Descaler Scale Control |
20mg/L |
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| KWT 1000 A W20 PWG | Reverse Osmosis Antiscalant | 16mg/L |
|
Miscellaneous Water Supply Products[1] |
||
| Trade Designation | Product Function | Max Use |
| AQUASORB™ 3005 K4 PWG | Well Drilling Aid | NA |
| AQUASORB™ 3005 KM PWG | Well Drilling Aid | NA |
| AQUASORB™ 3005 KB PWG | Well Drilling Aid | NA |
| AQUASORB™ 3005 KC PWG | Well Drilling Aid | NA |
| AQUASORB™ 3005 S PWG | Well Drilling Aid | NA |
| AQUASORB™ 3005 KA PWG | Well Drilling Aid | NA |
| AQUASORB™ 3005 K2 PWG | Well Drilling Aid | NA |
| FLOSPERSE™ 3018 CS PWG | Well Drilling Aid Well Cleaning Aid |
NA |
[1] These products are designed to be flushed out prior to using the system for drinking
water. Before being placed into service, the well is to be properly flushed according
to the manufacturer's use instructions. Certification of these products is based on
the well drilling model with the following assumptions:
- The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
the drilling fluid has been added at the manufacturer's recommended level.
- The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5
acre aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
- The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
length (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
- The amount of well drilling fluid removed from the well during construction is equal
to the combined volumes of the casing and the screen, plus an additional amount
removed through the well disinfection and development (90% removed).
- This product should not be used in constructing wells in highly porous formations,
such as cavernous limestone.
|
||
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| FLOBEADS™ DB 45 PWG | Coagulation & Flocculation | 10mg/L |
| FLOBEADS™ DB 45 K PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 4420 PWG | Coagulation & Flocculation | 50mg/L |
| FLOQUAT™ FL 4440 PWG | Coagulation & Flocculation | 25mg/L |
| FLOQUAT™ FL 4450 PWG | Coagulation & Flocculation | 20mg/L |
| FLOQUAT™ FL 4520 PWG | Coagulation & Flocculation | 50mg/L |
| FLOQUAT™ FL 4530 PWG | Coagulation & Flocculation | 33mg/L |
| FLOQUAT™ FL 4535 PWG | Coagulation & Flocculation | 28mg/L |
| FLOQUAT™ FL 4540 PWG | Coagulation & Flocculation | 25mg/L |
| FLOQUAT™ FL 4620 PWG | Coagulation & Flocculation | 50mg/L |
| FLOQUAT™ FL 4820 PWG | Coagulation & Flocculation | 50mg/L |
|
Polyacrylamide [PC] |
||
| Trade Designation | Product Function | Max Use |
| FLOBEADS™ AB 305 MPM PWG[1] | Well Drilling Aid | NA |
| FLOPAM™ AH 912 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 905 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 905 PWG AB 20 | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 910 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 913 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 923 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 923 PWG AB 20 | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 934 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 934 PWG AB 20 | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 934 SHU PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ AN 945 PWG | Flocculant | 1mg/L |
| FLOPAM™ AN 956 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ FA 920 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ FA 920 PWG AB 20 | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ FO 4107 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ FO 4115 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ FO 4140 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ FO 4190 PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ FO 4190 VHM PWG | Coagulation & Flocculation | 1mg/L |
| FLOPAM™ FO 4240 PWG | Coagulation & Flocculation | 1mg/L |
[1] These products are designed to be flushed out prior to using the system for drinking
water. Before being placed into service, the well is to be properly flushed according
to the manufacturer's use instructions. Certification of these products is based on
the well drilling model with the following assumptions:
- The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
the drilling fluid has been added at the manufacturer's recommended level.
- The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5
acre aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
- The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
length (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
- The amount of well drilling fluid removed from the well during construction is equal
to the combined volumes of the casing and the screen, plus an additional amount
removed through the well disinfection and development (90% removed).
- This product should not be used in constructing wells in highly porous formations,
such as cavernous limestone.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polymaleic Acid |
||
| Trade Designation | Product Function | Max Use |
| FLOSPERSE™ 1050 CM PWG | Descaler Reverse Osmosis Antiscalant Distillation Antiscalant |
20mg/L |
|
Sodium Polyacrylate |
||
| Trade Designation | Product Function | Max Use |
| FLOBEADS™ AB 995 BPM PWG | Flocculant | 1mg/L |
| FLOSPERSE™ 10000 PWG | Reverse Osmosis Antiscalant Distillation Antiscalant |
20mg/L |
| FLOSPERSE™ 3000 PWG | Distillation Antiscalant Reverse Osmosis Antiscalant |
20mg/L |
| FLOSPERSE™ 3000 PWG[1] | Well Cleaning Aid Well Drilling Aid |
NA |
| FLOSPERSE™ 10000 PWG[1] | Well Cleaning Aid Well Drilling Aid |
NA |
[1] These products are designed to be flushed out prior to using the system for drinking
water. Before being placed into service, the well is to be properly flushed according
to the manufacturer's use instructions. Certification of these products is based on
the well drilling model with the following assumptions:
- The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
the drilling fluid has been added at the manufacturer's recommended level.
- The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5
acre aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
- The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
length (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
- The amount of well drilling fluid removed from the well during construction is equal
to the combined volumes of the casing and the screen, plus an additional amount
removed through the well disinfection and development (90% removed).
- This product should not be used in constructing wells in highly porous formations,
such as cavernous limestone.
|
||
Facility : Saint-Avold, France
|
Polyamines[PY] |
||
| Trade Designation | Product Function | Max Use |
| FLOQUAT™ FL 2250 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 2350 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 2449 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 2550 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 2565 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 2650 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 2749 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 2850 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 2949 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 3050 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 3150 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 3240 PWG | Coagulation & Flocculation | 10mg/L |
| FLOQUAT™ FL 3249 PWG | Coagulation & Flocculation | 10mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
Number of matching Manufacturers is 1
Number of matching Products is 72
Processing time was 0 seconds

