NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=23910&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Hydrite Chemical Co. | |
| 17385 Golf Parkway | |
| Brookfield, WI 53045 | |
| United States | |
| 262-792-1450 | |
| Visit this company's website |
Facility : Visalia, CA
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% FG | Corrosion & Scale Control Sequestering |
13mg/L |
| Phosphoric Acid 75% Technical | Corrosion & Scale Control Sequestering |
13mg/L |
| Phosphoric Acid 85% FG | Corrosion & Scale Control Sequestering |
12mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Bleach | Disinfection & Oxidation | 37mg/L |
| San-I-King #451 | Disinfection & Oxidation | 37mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 37mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Terre Haute, IN
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% FG | Sequestering Corrosion & Scale Control |
13mg/L |
| Phosphoric Acid 75% Technical | Sequestering Corrosion & Scale Control |
13mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash Liquid 45% | Corrosion & Scale Control | 100mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 40% FG | Dechlorination | 46mg/L |
[1] This product contains sulfite. |
||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : Waterloo, IA
|
Hydrogen Peroxide[HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide 34% FG | Oxidant | 3mgL |
| Hydrogen Peroxide 35% FG | Oxidant | 3mg/L |
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% FG | Corrosion & Scale Control Sequestering |
13mg/L |
| Phosphoric Acid 85% FG | Corrosion & Scale Control Sequestering |
12mg/L |
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 30% FG | Dechlorination | 46mg/L |
| Sodium Bisulfite 40% FG | Dechlorination | 46mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : Lubbock, TX
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% FG | Sequestering Corrosion & Scale Control |
13mg/L |
|
Sodium Chlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Chlorite, 25% Active Solution | Chlorine Dioxide Production | 28mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda Liquid 50% Membrane Cell | Corrosion & Scale Control pH Adjustment |
100mg/L |
Facility : La Crosse, WI
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda Liquid 50% FG | pH Adjustment | 100 mg/L |
| Hydricare 3130 | pH Adjustment Corrosion & Scale Control |
200 mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Bleach | Disinfection & Oxidation | 37 mg/L |
| San-I-King #451 | Disinfection & Oxidation | 37 mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 37 mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| CWS PT-190 (#8400) | Corrosion & Scale Control Sequestering |
30mg/L |
NOTE: Only products bearing the NSF Mark are Certified.
Facility : Milwaukee, WI
|
Blended Corrosion Inhibitor |
||
| Trade Designation | Product Function | Max Use |
| Hydricare 3391 | Sequestering Corrosion & Scale Control |
30mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride Sol'n Drinking Water Grade | Coagulation & Flocculation | 250mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 10% | Coagulation & Flocculation | 256 mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid | Fluoridation | 5 mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 75% FG | Corrosion & Scale Control Sequestering |
13 mg/L |
| Phosphoric Acid 85% FG | Corrosion & Scale Control Sequestering |
12 mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 30% FG | pH Adjustment | 166 mg/L |
NOTE: Only products bearing the NSF Mark are Certified.
Facility : Oshkosh, WI
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Bleach | Disinfection & Oxidation | 79 mg/L |
| San-I-King #451 | Disinfection & Oxidation | 79 mg/L |
| Sodium Hypochlorite - High Strength - Registered | Disinfection & Oxidation | 68mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 79 mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
NOTE: Only products bearing the NSF Mark are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 36
Processing time was 0 seconds

