NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=25070&Standard=060&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
Odyssey Manufacturing Company 
1484 Massaro Boulevard
Tampa, FL 33619 
United States 
813-635-0339
Visit this company's website

Facility : Lantana, FL


Sodium Hydroxide
Trade Designation Product Function Max Use
25% Sodium Hydroxide Corrosion & Scale Control
pH Adjustment		 200mg/L
50% Sodium Hydroxide Corrosion & Scale Control
pH Adjustment		 100mg/L

Sodium Hypochlorite[HY]
Trade Designation Product Function Max Use
Ultrachlor 12.5 Trade Percent Sodium Hypochlorite Disinfection & Oxidation 70mg/L 

[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations. Also,
     reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
     Storage of Hypochlorite Solutions appendix for information on preservation techniques
     for hypochlorite bleach in transit and storage.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Tampa, FL (T1)


Sodium Hypochlorite[HY]
Trade Designation Product Function Max Use
Sodium Hypochlorite 12.5 Trade Percent Disinfection & Oxidation 94mg/L
Sodium Hypochlorite 12.5 Weight Percent Disinfection & Oxidation 84 mg/L
Ultrachlor Disinfection & Oxidation 94mg/L 

[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations. Also,
     reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
     Storage of Hypochlorite Solutions appendix for information on preservation techniques
     for hypochlorite bleach in transit and storage.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Tampa, FL (T2)


Hydrochloric Acid
Trade Designation Product Function Max Use
Hydrochloric Acid - 18 Baume Corrosion & Scale Control 40mg/L
Hydrochloric Acid - 20 Baume Corrosion & Scale Control 40mg/L
Hydrochloric Acid - 22 Baume Corrosion & Scale Control 40mg/L

Sodium Bisulfite[1]
Trade Designation Product Function Max Use
38% - 40% Sodium Bisulfite Solution Dechlorination 50mg/L 

[1] This product contains sulfite.
   Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
    The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).

Sodium Chloride[2]
Trade Designation Product Function Max Use
Sodium Chloride Electrolytic Chlorination
Softener		 NA 

[2] For electrolytic sodium hypochlorite generator use of this product, the maximum
    disinfectant feed concentration shall not exceed 10 mg Cl2/L.  This requirement limits
    bromate production in the effluent sodium hypochlorite and is based on the bromide
    concentration in the salt.

Sodium Hydroxide
Trade Designation Product Function Max Use
25% Sodium Hydroxide Corrosion & Scale Control
pH Adjustment		 200mg/L
50% Sodium Hydroxide Corrosion & Scale Control
pH Adjustment		 100mg/L

Sodium Hypochlorite[HY]
Trade Designation Product Function Max Use
Ultrachlor 12.5 Trade Percent Sodium Hypochlorite Disinfection & Oxidation 70mg/L 

[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations. Also,
     reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
     Storage of Hypochlorite Solutions appendix for information on preservation techniques
     for hypochlorite bleach in transit and storage.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds