NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=34640&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Arkema Canada Inc. | |
| 655 Alphonse-Deshaies Boulevard | |
| Becancour, QC G9H 2Y8 | |
| Canada | |
| 819-294-9965 |
Facility : Becancour, Québec, Canada
|
Hydrogen Peroxide [HP] |
||
| Trade Designation | Product Function | Max Use |
| Albone 35 MS[1] | Oxidant | 3mg/L |
| Albone 50 MS[2] | Oxidant | 2.1mg/L |
| Albone 70 MS[3] | Oxidant | 1.5mg/L |
| Valsterane® 27 FG | Oxidant | 3.9mg/L |
| Valsterane® 35 FG[1] | Oxidant | 3 mg/L |
| Valsterane® 50 FG[2] | Oxidant | 2.1 mg/L |
[1] This product may be used for the treatment of sulfide and organic contaminants, with or
without ozone or ultra-violet (UV) light, at a maximum use level of 85 mg/L. Treatment
must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
proposed maximum residual level.
[2] This product may be used for the treatment of sulfide and organic contaminants, with or
without ozone or ultra-violet (UV) light, at a maximum use level of 60 mg/L. Treatment
must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
proposed maximum residual level.
[3] This product may be used for the treatment of sulfide and organic contaminants, with or
without ozone or ultra-violet (UV) light, at a maximum use level of 43 mg/L. Treatment
must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
proposed maximum residual level.
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 6
Processing time was 0 seconds

