NSF Product and Service Listings
These NSF Official Listings are current as of Saturday, July 27, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=4Q200&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| George S. Coyne Chemical Co., Inc. | |
| 3015 State Road | |
| Croydon, PA 19021 | |
| United States | |
| 800-523-1230 | |
| 215-785-3000 | |
| Visit this company's website |
Facility : Croydon, PA
|
Aluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Chloride 28% | Coagulation & Flocculation | 200mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2000 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2500 | Coagulation & Flocculation | 250mg/L |
| Magnasol 4000G | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 50% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate 50% Commercial Gr. | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate 50% Low Iron | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate 30% | Chloramination | 53mg/L |
| Ammonium Sulfate 40% | Chloramination | 40mg/L |
|
Blended Coagulation Chemicals[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2050F | Coagulation & Flocculation | 312mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| CES C-QUESTER 5 | Corrosion & Scale Control Sequestering |
28mg/L |
|
Calcium Thiosulfate[1] |
||
| Trade Designation | Product Function | Max Use |
| Calcium Thiosulfate 30% | Ozone Reduction Dechlorination |
50mg/L |
[1] This product is to be used for the destruction of residual chlorine. It should be
applied only to the extent necessary to ensure chlorine removal. Actual chlorine
concentration in the water should be used to calculate the necessary dose of calcium
thiosulfate.
|
||
|
Citric Acid |
||
| Trade Designation | Product Function | Max Use |
| CMC 150[2] [3] | Membrane Cleaner | NA |
| Citric Acid Anhydrous | Membrane Cleaner | NA |
[2] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[3] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-40% | Coagulation & Flocculation | 141mg/L |
| Ferric Chloride 38% | Coagulation & Flocculation | 141mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 60% | Coagulation & Flocculation | 600mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23% | Fluoridation | 4mg/L |
|
Hydrogen Peroxide[HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide 27% | Oxidant Dechlorination |
2.4mg/L |
| Hydrogen Peroxide 31% | Oxidant Dechlorination |
3.4mg/L |
| Hydrogen Peroxide 35% | Oxidant Dechlorination |
3mg/L |
| Hydrogen Peroxide 50% | Oxidant Dechlorination |
2.1mg/L |
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Miscellaneous Corrosion Chemicals |
||
| Trade Designation | Product Function | Max Use |
| CES LIME-D-SCALE[PC] | Corrosion & Scale Control Sequestering |
7mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| Sodium thiosuflate 30% | Dechlorination Ozone Reduction |
30mg/L |
|
Miscellaneous Water Supply Products |
||
| Trade Designation | Product Function | Max Use |
| CES SCALE FREE PLUS | Reverse Osmosis Antiscalant | 15mg/L |
| Foam Free 1350[4] | Antifoamer | 41mg/L |
| QS 35 | Other | NA |
| Sulfamic Acid[2] [3] [5] | Other | NA |
[2] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[3] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
[4] Certified for addition to the feedwater for evaporative desalination units only.
[5] This product is designed to remove organic and inorganic deposits from filters,
underdrains, tanks, piping systems, wells and vessels that may come in contact with
drinking water.
|
||
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 15%-85% | Corrosion & Scale Control pH Adjustment |
12mg/L |
| Phosphoric Acid 36% | Corrosion & Scale Control pH Adjustment |
27mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control pH Adjustment |
13mg/L |
| Phosphoric Acid 80% | Corrosion & Scale Control pH Adjustment |
12mg/L |
| Phosphoric Acid 85% | Corrosion & Scale Control pH Adjustment |
12mg/L |
|
Poly (Diallyldimethylammonium Chloride)(pDADMAC) |
||
| Trade Designation | Product Function | Max Use |
| SW 102 | Coagulation & Flocculation | 50mg/L |
| SW 102HV | Coagulation & Flocculation | 50mg/L |
| SW 102XHV | Coagulation & Flocculation | 50mg/L |
| SW 104 | Coagulation & Flocculation | 25mg/L |
| SW 104HV | Coagulation & Flocculation | 25mg/L |
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| SW 2120 | Coagulation & Flocculation | 1mg/L |
| SW 2130 | Coagulation & Flocculation | 1mg/L |
| SW 4316 | Coagulation & Flocculation | 3.5mg/L |
| SW 4363 | Coagulation & Flocculation | 3.5mg/L |
| Superfine Floc 3241 | Coagulation & Flocculation | 1mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2010 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2020 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2030 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2040 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2050 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2060 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2070 | Coagulation & Flocculation | 250mg/L |
| CES PACl 700S | Coagulation & Flocculation | 250mg/L |
| CES PACl 900S | Coagulation & Flocculation | 250mg/L |
| CES PACl 950S | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polyamines[PY] |
||
| Trade Designation | Product Function | Max Use |
| A-150 | Coagulation & Flocculation | 10mg/L |
| A-150HV | Coagulation & Flocculation | 10mg/L |
| A-150LV | Coagulation & Flocculation | 10mg/L |
| B-150 | Coagulation & Flocculation | 10mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Polymer Blends [PY] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2102[AL] | Coagulation & Flocculation | 255mg/L |
| CES PACl 2105[AL] | Coagulation & Flocculation | 263mg/L |
| CES PACl 2110[AL] | Coagulation & Flocculation | 250mg/L |
| CES PACl 2115[AL] | Coagulation & Flocculation | 167mg/L |
| CES PACl 2120[AL] | Coagulation & Flocculation | 125mg/L |
| CES PACl 2125[AL] | Coagulation & Flocculation | 100mg/L |
| CES PACl 2130[AL] | Coagulation & Flocculation | 83mg/L |
| CES PACl 2135[AL] | Coagulation & Flocculation | 71mg/L |
| CES PACl 2140[AL] | Coagulation & Flocculation | 62mg/L |
| CES PACl 2145[AL] | Coagulation & Flocculation | 56mg/L |
| CES PACl 2150[AL] | Coagulation & Flocculation | 50mg/L |
| CES PACl 2202[AL] | Coagulation & Flocculation | 255mg/L |
| CES PACl 2205[AL] | Coagulation & Flocculation | 200mg/L |
| CES PACl 2210[AL] | Coagulation & Flocculation | 100mg/L |
| CES PACl 2215[AL] | Coagulation & Flocculation | 67mg/L |
| CES PACl 2220[AL] | Coagulation & Flocculation | 50mg/L |
| CES PACl 2225[AL] | Coagulation & Flocculation | 40mg/L |
| CES PACl 2230[AL] | Coagulation & Flocculation | 33mg/L |
| CES PACl 2235[AL] | Coagulation & Flocculation | 29mg/L |
| CES PACl 2240[AL] | Coagulation & Flocculation | 25mg/L |
| CES PACl 2245[AL] | Coagulation & Flocculation | 22mg/L |
| CES PACl 2250[AL] | Coagulation & Flocculation | 20mg/L |
| CES PACl 2302[AL] | Coagulation & Flocculation | 255mg/L |
| CES PACl 2305[AL] | Coagulation & Flocculation | 263mg/L |
| CES PACl 2310[AL] | Coagulation & Flocculation | 250mg/L |
| CES PACl 2402[AL] | Coagulation & Flocculation | 255mg/L |
| CES PACl 2405[AL] | Coagulation & Flocculation | 20mg/L |
| CES PACl 2410[AL] | Coagulation & Flocculation | 100mg/L |
| CES PACl 2530[AL] | Coagulation & Flocculation | 200mg/L |
| CES PACl 2550[AL] | Coagulation & Flocculation | 200mg/L |
| CES PACl 2580[AL] | Coagulation & Flocculation | 200mg/L |
| CES PACl 2802[AL] | Coagulation & Flocculation | 255mg/L |
| CES PACl 2805[AL] | Coagulation & Flocculation | 263mg/L |
| CES PACl 2810[AL] | Coagulation & Flocculation | 250mg/L |
| CES PACl 2902[AL] | Coagulation & Flocculation | 255mg/L |
| CES PACl 2905[AL] | Coagulation & Flocculation | 200mg/L |
| CES PACl 2910[AL] | Coagulation & Flocculation | 100mg/L |
| Ferri+Plus 1025 | Coagulation & Flocculation | 250mg/L |
| Ferri+Plus 1050 | Coagulation & Flocculation | 160mg/L |
| Ferri+Plus 1075 | Coagulation & Flocculation | 107mg/L |
| Ferri+Plus 1100 | Coagulation & Flocculation | 80mg/L |
| Ferri+Plus 3025 | Coagulation & Flocculation | 255mg/L |
| Ferri+Plus 3050 | Coagulation & Flocculation | 200mg/L |
| Ferri+Plus 3075 | Coagulation & Flocculation | 133mg/L |
| Ferri+Plus 3100 | Coagulation & Flocculation | 100mg/L |
| Ferri+Plus 4025 | Coagulation & Flocculation | 255mg/L |
| Ferri+Plus 4050 | Coagulation & Flocculation | 200mg/L |
| Ferri+Plus 4075 | Coagulation & Flocculation | 133mg/L |
| Ferri+Plus 4100 | Coagulation & Flocculation | 100mg/L |
| Ferri+Plus 5025 | Coagulation & Flocculation | 255mg/L |
| Ferri+Plus 5050 | Coagulation & Flocculation | 200mg/L |
| Ferri+Plus 5075 | Coagulation & Flocculation | 133mg/L |
| Ferri+Plus 5100 | Coagulation & Flocculation | 100mg/L |
| Magnasol 4610G[AL] | Coagulation & Flocculation | 100mg/L |
| Magnasol 4620G[AL] | Coagulation & Flocculation | 50mg/L |
| Magnasol 4710G[AL] | Coagulation & Flocculation | 250mg/L |
| Magnasol 4725G[AL] | Coagulation & Flocculation | 100mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Potassium Carbonate |
||
| Trade Designation | Product Function | Max Use |
| CES Alkali Free | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Carbonate Dense Regular | Corrosion & Scale Control pH Adjustment |
50mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash 45% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Aluminate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Aluminate 38% | Coagulation & Flocculation | 105mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Bisulfite[6] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 10-20% | Dechlorination | 92mg/L |
| Sodium Bisulfite 20-30% | Dechlorination | 61mg/L |
| Sodium Bisulfite 30-40% | Dechlorination | 46mg/L |
| Sodium Bisulfite 38% | Dechlorination | 46mg/L |
| Sodium Bisulfite Solution | Dechlorination | 46mg/L |
[6] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Carbonate |
||
| Trade Designation | Product Function | Max Use |
| Soda Ash Solution 10% | Corrosion & Scale Control pH Adjustment |
1000mg/L |
| Soda Ash Solution 15% | Corrosion & Scale Control pH Adjustment |
667mg/L |
|
Sodium Fluoride |
||
| Trade Designation | Product Function | Max Use |
| Sodium Fluoride | Fluoridation | 2.2mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda Liquid 10% | Corrosion & Scale Control pH Adjustment |
1000mg/L |
| Caustic Soda Liquid 13% | Corrosion & Scale Control pH Adjustment |
769mg/L |
| Caustic Soda Liquid 15% | Corrosion & Scale Control pH Adjustment |
667mg/L |
| Caustic Soda Liquid 18% | Corrosion & Scale Control pH Adjustment |
556mg/L |
| Caustic Soda Liquid 20% | Corrosion & Scale Control pH Adjustment |
500mg/L |
| Caustic Soda Liquid 25% | Corrosion & Scale Control pH Adjustment |
400mg/L |
| Caustic Soda Liquid 30% | Corrosion & Scale Control pH Adjustment |
333mg/L |
| Caustic Soda Liquid 50% | Corrosion & Scale Control pH Adjustment |
200mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite Solution 12.5% | Disinfection & Oxidation | 50mg/L |
| Sodium Hypochlorite Solution 5-10% | Disinfection & Oxidation | 62mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 10% | Disinfection & Oxidation Oxidant |
352mg/L |
| Sodium Permanganate 15% | Disinfection & Oxidation Oxidant |
237mg/L |
| Sodium Permanganate 20% | Disinfection & Oxidation Oxidant |
176mg/L |
| Sodium Permanganate 40% | Disinfection & Oxidation Oxidant |
88mg/L |
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| BW 50™ Sodium Silicate | Corrosion & Scale Control Sequestering |
234mg/L |
| D® Sodium Silicate | Corrosion & Scale Control Sequestering |
226mg/L |
| E® Sodium Silicate | Corrosion & Scale Control Sequestering |
275mg/L |
| K® Sodium Silicate | Corrosion & Scale Control Sequestering |
234mg/L |
| M® Sodium Silicate | Corrosion & Scale Control Sequestering |
224mg/L |
| N® 38 Sodium Silicate | Corrosion & Scale Control Sequestering |
289mg/L |
| N® CLEAR Sodium Silicate | Corrosion & Scale Control Sequestering |
265mg/L |
| N® Sodium Silicate | Corrosion & Scale Control Sequestering |
265mg/L |
| O® Sodium Silicate | Corrosion & Scale Control Sequestering |
259mg/L |
| RU® Sodium Silicate | Corrosion & Scale Control Sequestering |
212mg/L |
| STARSO® Sodium Silicate | Corrosion & Scale Control Sequestering |
266mg/L |
| STAR™ Sodium Silicate | Corrosion & Scale Control Sequestering |
269mg/L |
| STIXSO™ RR Sodium Silicate | Corrosion & Scale Control Sequestering |
255mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid | pH Adjustment | 50mg/L |
| Sulfuric Acid 66 BE | pH Adjustment | 50mg/L |
| Sulfuric Acid 78% | pH Adjustment | 60mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| Tetrapotassium Pyrophosphate 60% | Corrosion & Scale Control Sequestering |
29mg/L |
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| CES CORR FREE 9 | Corrosion & Scale Control Sequestering |
15mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
Facility : Fairless Hills, PA
|
Aluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Chloride 28% | Coagulation & Flocculation | 200mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2000 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2500 | Coagulation & Flocculation | 250mg/L |
| Magnasol 4000G | Coagulation & Flocculation | 250mg/L |
| Praestol K2001 | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 50% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate 50% Commercial Gr. | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate 50% Low Iron | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate 30% | Chloramination | 53mg/L |
|
Blended Coagulation Chemicals[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2050F | Coagulation & Flocculation | 312mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Calcium Thiosulfate[1] |
||
| Trade Designation | Product Function | Max Use |
| Calcium Thiosulfate 30% | Ozone Reduction Dechlorination |
50mg/L |
[1] This product is to be used for the destruction of residual chlorine. It should be
applied only to the extent necessary to ensure chlorine removal. Actual chlorine
concentration in the water should be used to calculate the necessary dose of calcium
thiosulfate.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-40% | Coagulation & Flocculation | 141mg/L |
| Ferric Chloride 38% | Coagulation & Flocculation | 141mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 60% | Coagulation & Flocculation | 600mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23% | Fluoridation | 4mg/L |
|
Hydrogen Peroxide[HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide 27% | Oxidant Dechlorination |
2.4mg/L |
| Hydrogen Peroxide 31% | Oxidant Dechlorination |
3.4mg/L |
| Hydrogen Peroxide 35% | Oxidant Dechlorination |
3mg/L |
| Hydrogen Peroxide 50% | Oxidant Dechlorination |
2.1mg/L |
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| CES Alkali LF | Corrosion & Scale Control pH Adjustment |
111mg/L |
| CES Alkali LF Plus | Corrosion & Scale Control pH Adjustment |
125mg/L |
| Sodium thiosuflate 30% | Dechlorination Ozone Reduction |
30mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 15%-85% | Corrosion & Scale Control pH Adjustment |
12mg/L |
| Phosphoric Acid 36% | Corrosion & Scale Control pH Adjustment |
27mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control pH Adjustment |
13mg/L |
| Phosphoric Acid 80% | Corrosion & Scale Control pH Adjustment |
12mg/L |
| Phosphoric Acid 85% | Corrosion & Scale Control pH Adjustment |
12mg/L |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2010 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2020 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2030 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2040 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2050 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2060 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2070 | Coagulation & Flocculation | 250mg/L |
| CES PACl 700S | Coagulation & Flocculation | 250mg/L |
| CES PACl 900S | Coagulation & Flocculation | 250mg/L |
| CES PACl 950S | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends[AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2102 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2105 | Coagulation & Flocculation | 263mg/L |
| CES PACl 2110 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2115 | Coagulation & Flocculation | 167mg/L |
| CES PACl 2120 | Coagulation & Flocculation | 125mg/L |
| CES PACl 2125 | Coagulation & Flocculation | 100mg/L |
| CES PACl 2130 | Coagulation & Flocculation | 83mg/L |
| CES PACl 2135 | Coagulation & Flocculation | 71mg/L |
| CES PACl 2140 | Coagulation & Flocculation | 62mg/L |
| CES PACl 2145 | Coagulation & Flocculation | 56mg/L |
| CES PACl 2150 | Coagulation & Flocculation | 50mg/L |
| CES PACl 2202 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2205 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2210 | Coagulation & Flocculation | 100mg/L |
| CES PACl 2215 | Coagulation & Flocculation | 67mg/L |
| CES PACl 2220 | Coagulation & Flocculation | 50mg/L |
| CES PACl 2225 | Coagulation & Flocculation | 40mg/L |
| CES PACl 2230 | Coagulation & Flocculation | 33mg/L |
| CES PACl 2235 | Coagulation & Flocculation | 29mg/L |
| CES PACl 2240 | Coagulation & Flocculation | 25mg/L |
| CES PACl 2245 | Coagulation & Flocculation | 22mg/L |
| CES PACl 2250 | Coagulation & Flocculation | 20mg/L |
| CES PACl 2302 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2305 | Coagulation & Flocculation | 263mg/L |
| CES PACl 2310 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2402 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2405 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2410 | Coagulation & Flocculation | 100mg/L |
| CES PACl 2530 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2550 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2580 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2802 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2805 | Coagulation & Flocculation | 263mg/L |
| CES PACl 2810 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2902 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2905 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2910 | Coagulation & Flocculation | 100mg/L |
| Magnasol 4610G | Coagulation & Flocculation | 100mg/L |
| Magnasol 4620G | Coagulation & Flocculation | 50mg/L |
| Magnasol 4710G | Coagulation & Flocculation | 250mg/L |
| Magnasol 4725G | Coagulation & Flocculation | 100mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Potassium Carbonate |
||
| Trade Designation | Product Function | Max Use |
| CES Alkali Free | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Carbonate Dense Regular | Corrosion & Scale Control pH Adjustment |
50mg/L |
|
Sodium Aluminate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Aluminate 38% | Coagulation & Flocculation | 105mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 10-20% | Dechlorination | 92mg/L |
| Sodium Bisulfite 20-30% | Dechlorination | 61mg/L |
| Sodium Bisulfite 30-40% | Dechlorination | 46mf/L |
| Sodium Bisulfite 38% | Dechlorination | 46mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Fluoride |
||
| Trade Designation | Product Function | Max Use |
| Sodium Fluoride | Fluoridation | 2.2mg/L |
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda Liquid 25% | Corrosion & Scale Control pH Adjustment |
400mg/L |
| Caustic Soda Liquid 50% | Corrosion & Scale Control pH Adjustment |
200mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite Solution 12.5% | Disinfection & Oxidation | 50mg/L |
| Sodium Hypochlorite Solution 5-10% | Disinfection & Oxidation | 62mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 10% | Disinfection & Oxidation Oxidant |
352mg/L |
| Sodium Permanganate 15% | Disinfection & Oxidation Oxidant |
237mg/L |
| Sodium Permanganate 20% | Disinfection & Oxidation Oxidant |
176mg/L |
| Sodium Permanganate 40% | Disinfection & Oxidation Oxidant |
88mg/L |
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| BW 50™ Sodium Silicate | Corrosion & Scale Control Sequestering |
234mg/L |
| D® Sodium Silicate | Corrosion & Scale Control Sequestering |
226mg/L |
| E® Sodium Silicate | Corrosion & Scale Control Sequestering |
275mg/L |
| K® Sodium Silicate | Corrosion & Scale Control Sequestering |
234mg/L |
| M® Sodium Silicate | Corrosion & Scale Control Sequestering |
224mg/L |
| N® 38 Sodium Silicate | Corrosion & Scale Control Sequestering |
289mg/L |
| N® CLEAR Sodium Silicate | Corrosion & Scale Control Sequestering |
265mg/L |
| N® Sodium Silicate | Corrosion & Scale Control Sequestering |
265mg/L |
| O® Sodium Silicate | Corrosion & Scale Control Sequestering |
259mg/L |
| RU® Sodium Silicate | Corrosion & Scale Control Sequestering |
212mg/L |
| STARSO® Sodium Silicate | Corrosion & Scale Control Sequestering |
266mg/L |
| STAR™ Sodium Silicate | Corrosion & Scale Control Sequestering |
269mg/L |
| STIXSO™ RR Sodium Silicate | Corrosion & Scale Control Sequestering |
255mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid | pH Adjustment | 50mg/L |
| Sulfuric Acid 66 BE | pH Adjustment | 50mg/L |
| Sulfuric Acid 78% | pH Adjustment | 60mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| Tetrapotassium Pyrophosphate 60% | Corrosion & Scale Control Sequestering |
29mg/L |
Facility : Reading, PA
|
Aluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Chloride 28% | Coagulation & Flocculation | 200mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Chlorohydrate[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2000 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2500 | Coagulation & Flocculation | 250mg/L |
| Magnasol 4000G | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 50% | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate 50% Commercial Gr. | Coagulation & Flocculation | 150mg/L |
| Aluminum Sulfate 50% Low Iron | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Hydroxide (1-29.4%) | Chloramination | 14mg/L |
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate 30% | Chloramination | 53mg/L |
|
Blended Coagulation Chemicals[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2050F | Coagulation & Flocculation | 312mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Calcium Thiosulfate[1] |
||
| Trade Designation | Product Function | Max Use |
| Calcium Thiosulfate 30% | Ozone Reduction Dechlorination |
50mg/L |
[1] This product is to be used for the destruction of residual chlorine. It should be
applied only to the extent necessary to ensure chlorine removal. Actual chlorine
concentration in the water should be used to calculate the necessary dose of calcium
thiosulfate.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-40% | Coagulation & Flocculation | 141mg/L |
| Ferric Chloride 38% | Coagulation & Flocculation | 141mg/L |
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate 60% | Coagulation & Flocculation | 600mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23% | Fluoridation | 4mg/L |
|
Hydrogen Peroxide[HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide 27% | Oxidant Dechlorination |
2.4mg/L |
| Hydrogen Peroxide 31% | Oxidant Dechlorination |
3.4mg/L |
| Hydrogen Peroxide 35% | Oxidant Dechlorination |
3mg/L |
| Hydrogen Peroxide 50% | Oxidant Dechlorination |
2.1mg/L |
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| CES Alkali LF | pH Adjustment Corrosion & Scale Control |
111mg/L |
| CES Alkali LF Plus | pH Adjustment Corrosion & Scale Control |
125mg/L |
| Sodium thiosuflate 30% | Dechlorination Ozone Reduction |
30mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Phosphoric Acid 15%-85% | Corrosion & Scale Control pH Adjustment |
12mg/L |
| Phosphoric Acid 36% | Corrosion & Scale Control pH Adjustment |
27mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control pH Adjustment |
13mg/L |
| Phosphoric Acid 80% | Corrosion & Scale Control pH Adjustment |
12mg'L |
| Phosphoric Acid 85% | Corrosion & Scale Control pH Adjustment |
12mgL |
|
Polyaluminum Chloride[AL] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2010 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2020 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2030 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2040 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2050 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2060 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2070 | Coagulation & Flocculation | 250mg/L |
| CES PACl 700S | Coagulation & Flocculation | 250mg/L |
| CES PACl 900S | Coagulation & Flocculation | 250mg/L |
| CES PACl 950S | Coagulation & Flocculation | 250mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Polymer Blends[AL] [PY] |
||
| Trade Designation | Product Function | Max Use |
| CES PACl 2102 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2105 | Coagulation & Flocculation | 263mg/L |
| CES PACl 2110 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2115 | Coagulation & Flocculation | 167mg/L |
| CES PACl 2120 | Coagulation & Flocculation | 125mg/L |
| CES PACl 2125 | Coagulation & Flocculation | 100mg/L |
| CES PACl 2130 | Coagulation & Flocculation | 83mg/L |
| CES PACl 2135 | Coagulation & Flocculation | 71mg/L |
| CES PACl 2140 | Coagulation & Flocculation | 62mg/L |
| CES PACl 2145 | Coagulation & Flocculation | 56mg/L |
| CES PACl 2150 | Coagulation & Flocculation | 50mg/L |
| CES PACl 2202 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2205 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2210 | Coagulation & Flocculation | 100mg/L |
| CES PACl 2215 | Coagulation & Flocculation | 67mg/L |
| CES PACl 2220 | Coagulation & Flocculation | 50mg/L |
| CES PACl 2225 | Coagulation & Flocculation | 40mg/L |
| CES PACl 2230 | Coagulation & Flocculation | 33mg/L |
| CES PACl 2235 | Coagulation & Flocculation | 29mg/L |
| CES PACl 2240 | Coagulation & Flocculation | 25mg/L |
| CES PACl 2245 | Coagulation & Flocculation | 22mg/L |
| CES PACl 2250 | Coagulation & Flocculation | 20mg/L |
| CES PACl 2302 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2305 | Coagulation & Flocculation | 263mg/L |
| CES PACl 2310 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2402 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2405 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2410 | Coagulation & Flocculation | 100mg/L |
| CES PACl 2530 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2550 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2580 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2802 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2805 | Coagulation & Flocculation | 263mg/L |
| CES PACl 2810 | Coagulation & Flocculation | 250mg/L |
| CES PACl 2902 | Coagulation & Flocculation | 255mg/L |
| CES PACl 2905 | Coagulation & Flocculation | 200mg/L |
| CES PACl 2910 | Coagulation & Flocculation | 100mg/L |
| Magnasol 4610G | Coagulation & Flocculation | 100mg/L |
| Magnasol 4620G | Coagulation & Flocculation | 50mg/L |
| Magnasol 4710G | Coagulation & Flocculation | 250mg/L |
| Magnasol 4725G | Coagulation & Flocculation | 100mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
|
Potassium Carbonate |
||
| Trade Designation | Product Function | Max Use |
| CES Alkali Free | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Carbonate Dense Regular | Corrosion & Scale Control pH Adjustment |
50mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Potash 45% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Aluminate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Aluminate 38% | Coagulation & Flocculation | 105mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Sodium Bisulfite[2] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 10-20% | Dechlorination | 92mg/L |
| Sodium Bisulfite 20-30% | Dechlorination | 61mg/L |
| Sodium Bisulfite 30-40% | Dechlorination | 46mg/L |
| Sodium Bisulfite 38% | Dechlorination | 46mg/L |
| Sodium Bisulfite Solution | Dechlorination | 46mg/L |
[2] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda Liquid 25% | Corrosion & Scale Control pH Adjustment |
400mg/L |
| Caustic Soda Liquid 50% | Corrosion & Scale Control pH Adjustment |
200mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hypochlorite Solution 12.5% | Disinfection & Oxidation | 50mg/L |
| Sodium Hypochlorite Solution 5-10% | Disinfection & Oxidation | 62mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sodium Permanganate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate 10% | Disinfection & Oxidation Oxidant |
352mg/L |
| Sodium Permanganate 15% | Disinfection & Oxidation Oxidant |
237mg/L |
| Sodium Permanganate 20% | Disinfection & Oxidation Oxidant |
176mg/L |
| Sodium Permanganate 40% | Disinfection & Oxidation Oxidant |
88mg/L |
|
Sodium Silicate |
||
| Trade Designation | Product Function | Max Use |
| BW 50™ Sodium Silicate | Corrosion & Scale Control Sequestering |
234mg/L |
| D® Sodium Silicate | Corrosion & Scale Control Sequestering |
226mg/L |
| E® Sodium Silicate | Corrosion & Scale Control Sequestering |
275mg/L |
| K® Sodium Silicate | Corrosion & Scale Control Sequestering |
234mg/L |
| M® Sodium Silicate | Corrosion & Scale Control Sequestering |
224mg/L |
| N® 38 Sodium Silicate | Corrosion & Scale Control Sequestering |
289mg/L |
| N® CLEAR Sodium Silicate | Corrosion & Scale Control Sequestering |
265mg/L |
| N® Sodium Silicate | Corrosion & Scale Control Sequestering |
265mg/L |
| O® Sodium Silicate | Corrosion & Scale Control Sequestering |
259mg/L |
| RU® Sodium Silicate | Corrosion & Scale Control Sequestering |
212mg/L |
| STARSO® Sodium Silicate | Corrosion & Scale Control Sequestering |
266mg/L |
| STAR™ Sodium Silicate | Corrosion & Scale Control Sequestering |
269mg/L |
| STIXSO™ RR Sodium Silicate | Corrosion & Scale Control Sequestering |
255mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid | pH Adjustment | 50mg/L |
| Sulfuric Acid 66 BE | pH Adjustment | 50mg/L |
| Sulfuric Acid 78% | pH Adjustment | 60mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| Tetrapotassium Pyrophosphate 60% | Corrosion & Scale Control Sequestering |
29mg/L |
Number of matching Manufacturers is 1
Number of matching Products is 381
Processing time was 0 seconds
