NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 29, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=57270&Standard=060&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
The National Colloid Company 
906 Adams Street
Steubenville, OH 43952 
United States 
740-282-1171
Visit this company's website

Facility : Steubenville, OH


Aluminum Chlorohydrate[AL]
Trade Designation Product Function Max Use
Natco A-1999 Coagulation & Flocculation 250mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Aminotrimethylene Phosphonic Acid
Trade Designation Product Function Max Use
Natco ATMP-10 Reverse Osmosis Antiscalant 100mg/L
Natco ATMP-25 Reverse Osmosis Antiscalant 40mg/L
Natco ATMP-50 Reverse Osmosis Antiscalant 20mg/L

Blended Phosphates
Trade Designation Product Function Max Use
Natco SP-45 Corrosion & Scale Control
Sequestering		 28mg/L

Citric Acid[1] [2]
Trade Designation Product Function Max Use
Natco CA-50 Membrane Cleaner NA 

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
    of the product have been removed before placing into service.

Ferric Chloride
Trade Designation Product Function Max Use
Natco Ferric Chloride Coagulation & Flocculation 250mg/L
Natco Ferric Chloride Solution Coagulation & Flocculation 795mg/L

Hydroxyethylidene Diphosphonic Acid
Trade Designation Product Function Max Use
Natco HEDP-15 Reverse Osmosis Antiscalant 80mg/L
Natco HEDP-30 Reverse Osmosis Antiscalant 40mg/L
Natco HEDP-60 Reverse Osmosis Antiscalant 20mg/L

Miscellaneous Treatment Chemical
Trade Designation Product Function Max Use
Natco RO-560 Reverse Osmosis Antiscalant 7mg/L

Miscellaneous Water Supply Products[1]
Trade Designation Product Function Max Use
STA-CHLOR Well Cleaning Aid NA
WCA-32 Well Cleaning Aid NA 

[1] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.

Phosphoric Acid
Trade Designation Product Function Max Use
Natphos-36 Corrosion & Scale Control
pH Adjustment		 27mg/L
Natphos-75 Corrosion & Scale Control
pH Adjustment		 13mg/L

Polyacrylamide[PC]
Trade Designation Product Function Max Use
Natco WT-422 Coagulation & Flocculation 3mg/L
Natco WT-524 Coagulation & Flocculation 3mg/L
Natco WT-539 Coagulation & Flocculation 1mg/L
Natco WT-739 Coagulation & Flocculation 1mg/L 

[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

Polyaluminum Chloride[AL]
Trade Designation Product Function Max Use
Natco A-1999 Coagulation & Flocculation 250mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Sodium Bisulfite[3]
Trade Designation Product Function Max Use
Natco SB-38 Antioxidant
Dechlorination		 46mg/L 

[3] This product contains sulfite. Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).

Sodium Hydroxide
Trade Designation Product Function Max Use
Natco CS-10 Corrosion & Scale Control
pH Adjustment		 500mg/L
Natco CS-15 Corrosion & Scale Control
pH Adjustment		 333mg/L
Natco CS-20 Corrosion & Scale Control
pH Adjustment		 250mg/L
Natco CS-25 Corrosion & Scale Control
pH Adjustment		 200mg/L
Natco CS-30 Corrosion & Scale Control
pH Adjustment		 165mg/L
Natco CS-40 Corrosion & Scale Control
pH Adjustment		 125mg/L
Natco CS-50 Corrosion & Scale Control
pH Adjustment		 100mg/L

Sodium Hypochlorite[HY]
Trade Designation Product Function Max Use
Natchlor Disinfection & Oxidation 77mg/L 

[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations. Also,
     reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
     Storage of Hypochlorite Solutions appendix for information on preservation techniques
     for hypochlorite bleach in transit and storage.

Sodium Permanganate[4]
Trade Designation Product Function Max Use
Natsol-10 Disinfection & Oxidation
Oxidant		 352mg/L
Natsol-20 Disinfection & Oxidation
Oxidant		 176mg/L
Natsol-40 Disinfection & Oxidation
Oxidant		 88mg/L 

[4] The finished drinking water should be monitored to ensure that levels of manganese do
    not exceed 0.05 mg/L.

Sulfuric Acid
Trade Designation Product Function Max Use
Natco SA-50 Corrosion & Scale Control
pH Adjustment		 93mg/L
Natco SA-93 Corrosion & Scale Control
pH Adjustment		 50mg/L

Number of matching Manufacturers is 1
Number of matching Products is 35
Processing time was 0 seconds