NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, December 23, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=74860&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Old Bridge Minerals | |
| Waterworks Road | |
| Old Bridge, NJ 08857 | |
| United States | |
| 800-275-3924 | |
| 732-727-2225 |
Facility : Old Bridge, NJ
|
Copper Sulfate[CP] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate Pentahydrate | Algicide | 4mg/L |
| Copper Sulfate Solution, 23% High Purity Grade | Algicide | 17mg/L |
[CP] The finished drinking water shall be monitored to ensure that levels of copper do not
exceed 1.3 mg/L.
|
||
|
Zinc Chloride[ZN] |
||
| Trade Designation | Product Function | Max Use |
| Zinc Chloride 50% Solution | Corrosion & Scale Control | 6mg/L |
| Zinc Chloride 62.5% Solution | Corrosion & Scale Control | 6mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
|
Zinc Sulfate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| Zinc Sulfate | Corrosion & Scale Control Corrosion Control |
5mg/L |
| Zinc Sulfate Solution 33% | Corrosion & Scale Control Corrosion Control |
15mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 6
Processing time was 0 seconds

