NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 29, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=80820&Standard=060&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
Viking Chemical Co. 
2701 S. 6th St.
P.O. Box 1595 
Rockford, IL 61109-1171 
United States 
815-397-0500

Facility : Rockford, IL


Blended Phosphates
Trade Designation Product Function Max Use
AQUA*KING 1300 Corrosion Control
Sequestering		 28mg/L
AQUA*KING 1500 Corrosion Control
Sequestering		 24mg/L
AQUA*KING 1600 Corrosion Control
Sequestering		 24mg/L
AQUA*KING 1700 Corrosion Control
Sequestering		 28mg/L
AQUA*KING 1900 Corrosion Control
Sequestering		 28mg/L
AQUA*KING 5070 Corrosion Control
Sequestering		 10mg/L
AQUA*KING 5080 Corrosion Control
Sequestering		 10mg/L
AQUA*KING 5090 Corrosion Control
Sequestering		 10mg/L
KING*AQUA 1300 Corrosion Control
Sequestering		 28mg/L
KING*AQUA 1500 Corrosion Control
Sequestering		 28mg/L
KING*AQUA 1600 Corrosion Control
Sequestering		 28mg/L
KING*AQUA 1700 Corrosion Control
Sequestering		 28mg/L
KING*AQUA 1900 Corrosion Control
Sequestering		 28mg/L
KING*AQUA 5070 Corrosion Control
Sequestering		 10mg/L
KING*AQUA 5080 Corrosion Control
Sequestering		 10mg/L
KING*AQUA 5090 Corrosion Control
Sequestering		 10mg/L

Fluosilicic Acid
Trade Designation Product Function Max Use
Fluosilicic Acid Fluoridation 5 mg/L

Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Hydrogen Peroxide 34% Disinfection & Oxidation 3mg/L 

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

Manganese Sulfate[PO]
Trade Designation Product Function Max Use
Liquid Manganese Sulfate Other 3mg/L 

[PO] The finished drinking water shall be monitored to ensure that levels of manganese

     do not exceed 0.05 mg/L.

Miscellaneous Treatment Chemical
Trade Designation Product Function Max Use
AQUA*KING 9000 Reverse Osmosis Antiscalant 10mg/L
AQUA*KING 9100 Reverse Osmosis Antiscalant 10mg/L
KING*AQUA 9000 Reverse Osmosis Antiscalant 10mg/L
KING*AQUA 9100 Reverse Osmosis Antiscalant 10mg/L

Phosphoric Acid
Trade Designation Product Function Max Use
AQUA*KING 1000 Corrosion Control 20mg/L
KING*AQUA 1000 Corrosion Control 20mg/L
Phosphoric Acid 28% Corrosion & Scale Control
pH Adjustment		 34mg/L
Phosphoric Acid Liquid, 28% Corrosion & Scale Control
pH Adjustment		 34mg/L

Sodium Hydroxide
Trade Designation Product Function Max Use
Liquid Caustic Soda Corrosion & Scale Control
pH Adjustment		 100mg/L
Sodium Hydroxide, Solution Corrosion & Scale Control
pH Adjustment		 100mg/L

Sodium Hypochlorite[HY]
Trade Designation Product Function Max Use
Sodium Hypochlorite Disinfection & Oxidation 84 mg/L 

[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations. Also,
     reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
     Storage of Hypochlorite Solutions appendix for information on preservation techniques
     for hypochlorite bleach in transit and storage.

Sodium Permanganate[PO]
Trade Designation Product Function Max Use
Sodium Permanganate Oxidant 224mg/L 

[PO] The finished drinking water shall be monitored to ensure that levels of manganese

     do not exceed 0.05 mg/L.

Sodium Polyphosphates, Glassy
Trade Designation Product Function Max Use
AQUA*KING 2000 Filtration Aid
Sequestering		 28mg/L
KING*AQUA 2000 Filtration Aid
Sequestering		 28mg/L 

[1] Manganese sulfate is used in combination with potassium (or sodium) permanganate to
    produce hydrous manganese oxides (HMOs) which are used to adsorb positively charged
    ions, such as radium.
Number of matching Manufacturers is 1
Number of matching Products is 33
Processing time was 0 seconds