NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=81790&Standard=060&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
JRM Chemical, Inc. 
15663 Neo Parkway
Cleveland, OH 44128 
United States 
216-475-8488

Facility : # 1 USA


Miscellaneous Treatment Applications[1]
Trade Designation Product Function Max Use
Soil Moist Drill 2 Well Drilling Aid NA
Soil Moist Drill 3 Well Drilling Aid NA
Soil Moist Drill 4 Well Drilling Aid NA
Soil Moist Drill A2 Well Drilling Aid NA
Soil Moist Drill F Well Drilling Aid NA
Soil Moist Drill F2 Well Drilling Aid NA
Soil Moist Drill H Well Drilling Aid NA
Soil Moist Drill J2 Well Drilling Aid NA
Soil Moist Drill J3 Well Drilling Aid NA
Soil Moist Drill S Well Drilling Aid NA 

[1] These products are designed to be flushed out prior to using the system for drinking
    water.  Before being placed into service, the well is to be properly flushed according
    to
    the manufacturer's use instructions.  Certification of these products is based on the
    well drilling model with the following assumptions:
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
      the drilling fluid has been added at the manufacturer's recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5
      acre aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
      length (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
      to the combined volumes of the casing and the screen, plus an additional amount
      removed through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
      such as cavernous limestone.

Polyacrylamide[PC]
Trade Designation Product Function Max Use
FI-1000 Coagulation & Flocculation 1 mg/L
FI-1012 Coagulation & Flocculation 1mg/L
FI-1045 Coagulation & Flocculation 1mg/L
FI-1046 Coagulation & Flocculation 1mg/L
FI-2000 Coagulation & Flocculation 3mg/L
FI-2050 Coagulation & Flocculation 3mg/L
FI-2630 Coagulation & Flocculation 3mg/L
Hydrobond Coagulation & Flocculation 1 mg/L 

[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

Number of matching Manufacturers is 1
Number of matching Products is 18
Processing time was 0 seconds