NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=C0004534&Standard=060&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
Halliburton 
3000 North Sam Houston Parkway East
Houston, TX 77032 
United States 
800-735-6075 
281-871-4612
Visit this company's website

Facility : # 2 USA


Polyacrylamide [PC]
Trade Designation Product Function Max Use
EZ MUD®[1] [2] Well Drilling Aid NA
EZ MUD® GOLD[2] Well Drilling Aid NA
EZ MUD® PLUS[1] [2] Well Drilling Aid
Drilling Fluid		 NA
EZ-MUD® DP[1] [2] Well Drilling Aid NA
FUSE-IT Well Drilling Aid NA
Poly-Bore Coagulation & Flocculation 1mg/L
QUIK MUD® D-50[1] [2] Well Drilling Aid
Drilling Fluid		 NA
QUIK MUD® GOLD[1] [2] Well Drilling Aid NA 

[1] This product is designed to be flushed out prior to using the system for drinking water.
     The well is to be properly flushed and drained before being placed into service.  This
    product is to be used according to the manufacturer's use instructions.
[2] These products are designed to be flushed out prior to using the system for drinking
    water. Before being placed into service, the well is to be properly flushed according to
    the manufacturer's use instructions. Certification of these products is based on the
    well drilling model with the following assumptions: 
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
      the drilling fluid has been added at the manufacturer's recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5 acre
      aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length
      (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to 
      the combined volumes of the casing and the screen, plus an additional amount removed 
      through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
    such
      as cavernous limestone.
    
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
     requirements for percent monomer and dose.

Polyamines [PY]
Trade Designation Product Function Max Use
SYSTEM-FLOC 360 Coagulation & Flocculation 10mg/L
SYSTEM-FLOC 360[2] Well Drilling Aid NA 

[2] These products are designed to be flushed out prior to using the system for drinking
    water. Before being placed into service, the well is to be properly flushed according to
    the manufacturer's use instructions. Certification of these products is based on the
    well drilling model with the following assumptions: 
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
      the drilling fluid has been added at the manufacturer's recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5 acre
      aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length
      (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to 
      the combined volumes of the casing and the screen, plus an additional amount removed 
      through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
    such
      as cavernous limestone.
    
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

Sodium Polyacrylate[1] [2]
Trade Designation Product Function Max Use
AQUA-CLEAR® PFD Well Cleaning Aid
Well Drilling Aid
Drilling Fluid		 NA 

[1] This product is designed to be flushed out prior to using the system for drinking water.
     The well is to be properly flushed and drained before being placed into service.  This
    product is to be used according to the manufacturer's use instructions.
[2] These products are designed to be flushed out prior to using the system for drinking
    water. Before being placed into service, the well is to be properly flushed according to
    the manufacturer's use instructions. Certification of these products is based on the
    well drilling model with the following assumptions: 
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
      the drilling fluid has been added at the manufacturer's recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5 acre
      aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length
      (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to 
      the combined volumes of the casing and the screen, plus an additional amount removed 
      through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
    such
      as cavernous limestone.


Facility : # 12 USA


Polyamines [PY]
Trade Designation Product Function Max Use
SYSTEM-FLOC 360[1] Well Drilling Aid NA
SYSTEM-FLOC 360 Coagulation & Flocculation 10mg/L 

[1] These products are designed to be flushed out prior to using the system for drinking
    water. Before being placed into service, the well is to be properly flushed according to
    the manufacturer's use instructions. Certification of these products is based on the
    well drilling model with the following assumptions: 
    - The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which
      the drilling fluid has been added at the manufacturer's recommended level.
    - The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5 acre
      aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
    - The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
    length
      (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
    - The amount of well drilling fluid removed from the well during construction is equal
    to 
      the combined volumes of the casing and the screen, plus an additional amount removed 
      through the well disinfection and development (90% removed).
    - This product should not be used in constructing wells in highly porous formations,
    such
      as cavernous limestone.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
     percent monomer and dose.

Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds