NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, December 23, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=C0195534&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Evonik Active Oxygens, LLC | |
| 2 Turner Place | |
| Piscataway, NJ 08854 | |
| United States | |
| (732) 981-5000 | |
| Visit this company's website |
Facility : Tonawanda, NY
|
Miscellaneous Water Supply Products |
||
| Trade Designation | Product Function | Max Use |
| PERACLEAN VANGUARD | Oxidant | 15mg/L |
| PERACLEAN VANGUARD[1] | Membrane Cleaner | NA |
| VigorOx WWT II | Oxidant | 15mg/L |
| VigorOx WWT II[1] | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Pocola, OK
|
Hydrogen Peroxide[HP] |
||
| Trade Designation | Product Function | Max Use |
| HI OX 270 SG | Dechlorination Oxidant |
29.5mg/L |
| HI OX 340 SG | Dechlorination Oxidant |
23mg/L |
| HI OX 350 SG | Dechlorination Oxidant |
23mg/L |
| HI OX 500 SG | Dechlorination Oxidant |
16mg/L |
| HYPROX 270® H2O2 | Dechlorination Oxidant |
29.5mg/L |
| HYPROX 340® H2O2 | Dechlorination Oxidant |
23mg/L |
| HYPROX 350® H2O2 | Dechlorination Oxidant |
23mg/L |
| HYPROX 500® H2O2 | Dechlorination Oxidant |
16mg/L |
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| PERACLEAN VANGUARD | Oxidant | 15mg/L |
| VIGOROX WWT II | Oxidant | 15mg/L |
|
Miscellaneous Water Supply Products[1] |
||
| Trade Designation | Product Function | Max Use |
| PERACLEAN VANGUARD | Membrane Cleaner | NA |
| VIGOROX WWT II | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Memphis, TN
|
Miscellaneous Treatment Chemical |
||
| Trade Designation | Product Function | Max Use |
| PERACLEAN VANGUARD | Oxidant | 15mg/L |
|
Miscellaneous Water Supply Products |
||
| Trade Designation | Product Function | Max Use |
| PERACLEAN VANGUARD[1] | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Baytown, TX
|
Hydrogen Peroxide [HP] |
||
| Trade Designation | Product Function | Max Use |
| OXYPURE® 350[1] [2] | Dechlorination Oxidant |
23mg/L |
| OXYPURE® 500[3] [4] | Dechlorination Oxidant |
16mg/L |
[1] This product may be used for the treatment of sulfide and organic contaminants, with or
without ozone or ultra-violet (UV) light, at a maximum use level of 85 mg/L. Treatment
must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
proposed maximum residual level.
[2] This product may be used at a maximum use level of 70 mg/L for the following functions:
- reoxygenation of treated water
- oxidation of organic residuals
- oxidation of any reduced products, such as Fe(II) and sulfides
Treatment must be followed by chlorination to a chlorine residual not to exceed 4 mg/L,
the EPA's proposed maximum residual level.
[3] This product may be used for the treatment of sulfide and organic contaminants, with or
without ozone or ultra-violet (UV) light, at a maximum use level of 60 mg/L. Treatment
must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
proposed maximum residual level.
[4] This product may be used at a maximum use level of 50 mg/L for the following functions:
- reoxygenation of treated water
- oxidation of organic residuals
- oxidation of any reduced products, such as Fe(II) and sulfides
Treatment must be followed by chlorination to a chlorine residual not to exceed 4 mg/L,
the EPA's proposed maximum residual level.
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
Facility : Pasadena, TX
|
Hydrogen Peroxide [HP] |
||
| Trade Designation | Product Function | Max Use |
| HI OX 270 SG | Dechlorination Oxidant |
29.5mg/L |
| HI OX 340 SG | Dechlorination Oxidant |
23mg/L |
| HI OX 350 SG[1] [2] | Oxidant Dechlorination |
23mg/L |
| HI OX 500 SG[3] [4] | Oxidant Dechlorination |
16mg/L |
| HI OX 500 Tech[3] [4] | Oxidant Dechlorination |
16mg/L |
| HYPROX® 270 H2O2 | Dechlorination Oxidant |
29.5mg/L |
| HYPROX® 340 H2O2 | Dechlorination Oxidant |
23mg/L |
| HYPROX® 350 H2O2 | Dechlorination Oxidant |
23mg/L |
| HYPROX® 500 H2O2 | Dechlorination Oxidant |
16mg/L |
| HYPROX® 700 H2O2 | Dechlorination Oxidant |
11.5mg/L |
| OXYPURE® 350[1] [2] | Oxidant Dechlorination |
23mg/L |
| OXYPURE® 500[3] [4] | Oxidant Dechlorination |
16mg/L |
[1] This product may be used for the treatment of sulfide and organic contaminants, with or
without ozone or ultra-violet (UV) light, at a maximum use level of 85 mg/L. Treatment
must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
proposed maximum residual level.
[2] This product may be used at a maximum use level of 70 mg/L for the following functions:
- reoxygenation of treated water
- oxidation of organic residuals
- oxidation of any reduced products, such as Fe(II) and sulfides
Treatment must be followed by chlorination to a chlorine residual not to exceed 4 mg/L,
the EPA's proposed maximum residual level.
[3] This product may be used for the treatment of sulfide and organic contaminants, with or
without ozone or ultra-violet (UV) light, at a maximum use level of 60 mg/L. Treatment
must be followed by chlorination to a chlorine residual not to exceed 4 mg/L, the EPA's
proposed maximum residual level.
[4] This product may be used at a maximum use level of 50 mg/L for the following functions:
- reoxygenation of treated water
- oxidation of organic residuals
- oxidation of any reduced products, such as Fe(II) and sulfides
Treatment must be followed by chlorination to a chlorine residual not to exceed 4 mg/L,
the EPA's proposed maximum residual level.
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 32
Processing time was 0 seconds
