NSF Product and Service Listings
These NSF Official Listings are current as of Tuesday, December 3, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=C0521815&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
USALCO, LLC | |
2601 Cannery Avenue | |
Baltimore, MD 21226 | |
United States | |
219-873-0914 | |
Visit this company's website |
Facility : # 4 USA
Miscellaneous Treatment Chemical |
||
Trade Designation | Product Function | Max Use |
G-Anti Foam | Antifoamer | 100mg/L |
Miscellaneous Water Supply Products |
||
Trade Designation | Product Function | Max Use |
Filter Clean[1] [2] | Other | NA |
G Bio-Degreaser[1] [3] [4] | Other | NA |
G Biomass Remover[1] [3] [5] | Other Pipe Cleaning Aid Well Cleaning Aid |
NA |
G-Boost[6] | Pipe Cleaning Aid | NA |
GL- Neo pH+[1] [3] [5] | Other Pipe Cleaning Aid Well Cleaning Aid |
NA |
GS- Neo pH+[1] [7] [8] | Other | NA |
LF - Neo G+[2] | Other Well Cleaning Aid |
NA |
Neo G+[1] [2] | Other Well Cleaning Aid |
NA |
Neo G-Ultra[1] [2] | Other | NA |
Neo GX[9] | Other | NA |
Neo Media[10] | Other | NA |
Neo Media GX[10] | Other | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system for drinking water, following manufacturer's use instructions. [2] This product functions as a tank and filter cleaner. [3] This product has not been evaluated by NSF International as a disinfectant or bactericide. [4] This product is used to remove residual grease from water storage tanks. [5] This product also functions as a media bed bio-growth remover. [6] This product is designed to be flushed out prior to using the system for drinking water. The pipe is to be properly flushed and drained before being placed into service. Follow the manufacturer's use instructions. [7] The pH of the influent and effluent water should be monitored to ensure that all traces of the product have been removed before placing into service. [8] This product is designed to be used following the tank or filter cleaning process. [9] This product is authorized for use as a filtration media cleaning aid. Filters should be disconnected from service prior to the use of this product. After cleaning, the system should be backwashed with at least 3454 Liters of water. Follow manufacturer's use instructions. [10] This product is authorized for use as a filtration media cleaning aid. Filters should be disconnected from service prior to the use of this product. After cleaning, at least a 500-fold excess of backwash water should be used to flush the product from the system. Follow manufacturer's use instructions. |
Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds