NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 29, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=C0663556&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Miles Chemical Company, Inc. | |
| 12801 Rangoon Street | |
| Arleta, CA 91331 | |
| United States | |
| 818-503-3355 |
Facility : Arleta, CA
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48-50% | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 38-42% | Coagulation & Flocculation | 250mg/L |
|
Sodium Chlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| ERCOPure BCD-15 | Chlorine Dioxide Production Bactericide |
47mg/L |
| ERCOPure BCD-25 | Chlorine Dioxide Production Bactericide |
28mg/L |
| ERCOPure BCD-31 | Chlorine Dioxide Production Bactericide |
23mg/L |
| ERCOPure BCD-7.5 | Chlorine Dioxide Production Bactericide |
93mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Madera, CA
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate 48-50% | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Calcium Chloride |
||
| Trade Designation | Product Function | Max Use |
| Calcium Chloride 37% | Defluoridation | 200mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 38-42% | Coagulation & Flocculation | 250mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 87mg/L |
| Hydrochloric Acid 20 Be | pH Adjustment | 40mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrofluosilicic Acid 23-25% | Fluoridation | 5mg/L |
|
Potassium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Potassium Hydroxide 45% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Potassium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
90mg/L |
|
Sodium Chlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| 31% Active Sodium Chlorite Solution | Bactericide Chlorine Dioxide Production |
22mg/L |
| Acta Klor 25 | Bactericide Chlorine Dioxide Production |
22mg/L |
| Acta Klor 7.5 | Bactericide Chlorine Dioxide Production |
87mg/L |
| ERCOPure BCD-15 | Bactericide Chlorine Dioxide Production |
46mg/L |
| ERCOPure BCD-25 | Bactericide Chlorine Dioxide Production |
28mg/L |
| ERCOPure BCD-31 | Bactericide Chlorine Dioxide Production |
23mg/L |
| ERCOPure BCD-7.5 | Bactericide Chlorine Dioxide Production |
91mg/L |
| Technical Sodum Chlorite 18.75 | Bactericide Chlorine Dioxide Production |
35mg/L |
| Technical Sodum Chlorite 31.25 | Bactericide Chlorine Dioxide Production |
22mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 20% | pH Adjustment Corrosion & Scale Control |
250mg/L |
| Sodium Hydroxide 25% | pH Adjustment Corrosion & Scale Control |
200mg/L |
| Sodium Hydroxide 30% | pH Adjustment Corrosion & Scale Control |
166mg/L |
| Sodium Hydroxide 50% | pH Adjustment Corrosion & Scale Control |
100mg/L |
|
Sodium Hypochlorite[HY] |
||
| Trade Designation | Product Function | Max Use |
| APC Aqua-Chlor Sodium Hypochlorite 12.5% | Algicide Disinfection & Oxidation |
84mg/L |
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations. Also,
reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
Storage of Hypochlorite Solutions appendix for information on preservation techniques
for hypochlorite bleach in transit and storage.
|
||
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 93% | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Sulfuric Acid 98% | Corrosion & Scale Control pH Adjustment |
50mg/L |
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Facility : Oxnard, CA
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | pH Adjustment | 93mg/L |
| Hydrochloric Acid 20 Be | pH Adjustment | 45mg/L |
|
Sodium Chlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| Ercopure 25 | Disinfection & Oxidation | 28mg/L |
| Ercopure BCD-15 | Chlorine Dioxide Production Bactericide |
46mg/L |
| Ercopure BCD-25 | Chlorine Dioxide Production Bactericide |
28mg/L |
| Ercopure BCD-31 | Chlorine Dioxide Production Bactericide |
23mg/L |
| Ercopure BCD-7.5 | Chlorine Dioxide Production Bactericide |
91mg/L |
| Sodium Chlorite 25% | Disinfection & Oxidation | 28mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
Number of matching Manufacturers is 1
Number of matching Products is 38
Processing time was 0 seconds
