NSF Product and Service Listings

These NSF Official Listings are current as of Friday, January 30, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=C0805569&Standard=060&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
Capacity Chemical LLC 
8512 Hwy 33
Westley, CA 95387 
United States 
(209) 231-3977
Visit this company's website

Facility : Westley, CA


Ammonium Sulfate
Trade Designation Product Function Max Use
BSL ALS 40 Chloramination
Disinfection & Oxidation		 25mg/L

Hydrochloric Acid
Trade Designation Product Function Max Use
Hydrochloric Acid 15% pH Adjustment 90mg/L
Hydrochloric Acid 31% pH Adjustment 45mg/L

Hydrogen Peroxide[HP]
Trade Designation Product Function Max Use
Hydrogen Peroxide 15% Dechlorination
Oxidant		 3.5mg/L
Hydrogen Peroxide 34% Dechlorination
Oxidant		 3mg/L
Hydrogen Peroxide 50% Dechlorination
Oxidant		 2.1mg/L 

[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
     peroxide.  Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
     residual level.

Miscellaneous Water Supply Products
Trade Designation Product Function Max Use
Clear Line 1500 Membrane Cleaner NA
Clear Line 200 Membrane Cleaner NA
Clear Line 2200 Membrane Cleaner NA
Clear Line 5600 Membrane Cleaner NA

Sodium Hydroxide
Trade Designation Product Function Max Use
Sodium Hydroxide 10% pH Adjustment
Corrosion & Scale Control		 500mg/L
Sodium Hydroxide 30% pH Adjustment
Corrosion & Scale Control		 166mg/L

Sodium Hypochlorite[1] [2] [HY]
Trade Designation Product Function Max Use
Bleach 12.5% Disinfection & Oxidation 47mg/L
Bleach 5.25% Disinfection & Oxidation 111mg/L
Sodium Hypochlorite 12.5% Disinfection & Oxidation 47mg/L
Sodium Hypochlorite 5.25% Disinfection & Oxidation 111mg/L
Status Chlor 12.5% Disinfection & Oxidation 47mg/L
Status Chlor 5.25% Disinfection & Oxidation 111mg/L 

[1] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
    dioxide, chlorate ion, chloramine and disinfection by-products should be monitored in
    the finished drinking water to ensure compliance to all applicable regulations.
[2] Also, reference the AWWA B300 (Hypochlorites) standard’s Recommendations for the
    Handling and Storage of Hypochlorite Solutions appendix for information on preservation
    techniques for hypochlorite bleach in transit and storage.
[HY] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
     dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
     finished drinking water to ensure compliance to all applicable regulations. Also,
     reference the AWWA B300 (Hypochlorites) standard's Recommendations for the Handling and
     Storage of Hypochlorite Solutions appendix for information on preservation techniques
     for hypochlorite bleach in transit and storage.

Sulfuric Acid
Trade Designation Product Function Max Use
Sulfuric Acid 30% pH Adjustment
Corrosion & Scale Control		 153mg/L
Sulfuric Acid 50% pH Adjustment
Corrosion & Scale Control		 92mg/L 

[3] This product is designed to be used off-line and flushed out prior to using the system
    for drinking water, following manufacturer's use instructions.
Number of matching Manufacturers is 1
Number of matching Products is 20
Processing time was 0 seconds