NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, January 15, 2026 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?Company=C0805616&Standard=060&
NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Sterling Specialty Chemicals US LLC | |
| 575 N. Dairy Ashford Rd. | |
| Suite 720 | |
| Houston, TX 77079 | |
| United States | |
| 832-941-0085 |
Facility : #1 USA
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| STERFLOC 620 | Coagulation & Flocculation | 3.5mg/L |
| Sterfloc 683 | Coagulation & Flocculation | 3.5mg/L |
| Sterfloc 992 | Coagulation & Flocculation | 3.1mg/L |
| Sterfloc 913 | Coagulation & Flocculation | 3.1mg/L |
| Sterfloc 714 | Coagulation & Flocculation | 3.5mg/L |
| Sterfloc 925 | Coagulation & Flocculation | 2.5mg/L |
| STERFLOC 996 | Coagulation & Flocculation | 3.1mg/L |
| Sterfloc 649 | Coagulation & Flocculation | 3.5mg/L |
| STERFLOC 912 | Coagulation & Flocculation | 3.1mg/L |
| Sterfloc 886 | Coagulation & Flocculation | 3.5mg/L |
| Sterfloc 718 | Coagulation & Flocculation | 3.5mg/L |
| Sterfloc 716 | Coagulation & Flocculation | 3.5mg/L |
| Sterfloc 685 | Coagulation & Flocculation | 3.5mg/L |
| Sterfloc 712 | Coagulation & Flocculation | 3.5mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
Facility : #2 USA
|
Polyacrylamide[PC] |
||
| Trade Designation | Product Function | Max Use |
| SUPERFLOC C-6592RS | Coagulation & Flocculation | 3mg/L |
| Sterfloc 630WG | Coagulation & Flocculation | 0.6mg/L |
| Superfloc A-4330PWG | Coagulation & Flocculation | 0.6mg/L |
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
|
Polyamines[PY] |
||
| Trade Designation | Product Function | Max Use |
| STERFLOC 901G | Coagulation & Flocculation | 10mg/L |
| Sterfloc 901 | Coagulation & Flocculation | 10mg/L |
| Sterfloc 902 | Coagulation & Flocculation | 10mg/L |
| Sterfloc 903 | Coagulation & Flocculation | 10mg/L |
| Sterfloc 907 | Coagulation & Flocculation | 10mg/L |
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
|
||
Facility : #3 USA
|
Polyacrylamide [PC] |
||
| Trade Designation | Product Function | Max Use |
| STERDRILL A-2350[1] | Well Drilling Aid | NA |
| STERFLOC 6300 | Coagulation & Flocculation | 1mg/L |
| STERFLOC 6300[1] | Well Drilling Aid | NA |
[1] These products are designed to be flushed out prior to using the system for drinking
water. Before being placed into service, the well is to be properly
flushed according to the manufacturer's use instructions. Certification of these
products is based on the well drilling model with the following assumptions:
- The amount of well drilling fluid used is 3780 L (1000 U.S. gallons) to which the
drilling fluid has been added at the manufacturer's recommended level.
- The aquifer contains 3.1 million liters of water (815,000 gallons) based on a 0.5 acre
aquifer of 6.1 meter depth (20 ft.) and 25% porosity.
- The bore hole is 61 meters in total depth (200 ft.), the screen is 6.1 meters in
length (20 ft.), and the bore hole is 25.4 cm. in diameter (10 in.).
- The amount of well drilling fluid removed from the well during construction is equal
to the combined volumes of the casing and the screen, plus an
additional amount removed through the well disinfection and development (90% removed).
- This product should not be used in constructing wells in highly porous formations,
such as cavernous limestone.
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
|
||
Number of matching Manufacturers is 1
Number of matching Products is 25
Processing time was 0 seconds
