NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, May 16, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=Southern+Ionics+&

NSF/ANSI/CAN 60
Drinking Water Treatment Chemicals - Health Effects


 
Southern Ionics Incorporated 
579 Commerce Street
P.O. Box 1217 
West Point, MS 39773 
United States 
866-204-2850 
662-494-3055
Visit this company's website

Facility : # 2 Baton Rouge, LA


Aluminum Chloride[AL]
Trade Designation Product Function Max Use
AFCO AF45 Coagulation & Flocculation 200mg/L
Aluminum Chloride Coagulation & Flocculation 200mg/L
Aluminum Chloride - 29% Coagulation & Flocculation 200mg/L
Aluminum Chloride Solution Coagulation & Flocculation 200mg/L
Aluminum Chloride Solution - 29% Coagulation & Flocculation 200mg/L
Aluminum Chloride ex HCL Coagulation & Flocculation 200mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Chickasaw, AL


Aluminum Chloride[AL]
Trade Designation Product Function Max Use
AFCO AF45 Coagulation & Flocculation 200mg/L
Aluminum Chloride Coagulation & Flocculation 200mg/L
Aluminum Chloride - 29% Coagulation & Flocculation 200mg/L
Aluminum Chloride Solution Coagulation & Flocculation 200mg/L
Aluminum Chloride Solution - 29% Coagulation & Flocculation 200mg/L
Aluminum Chloride ex HCL Coagulation & Flocculation 200mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Activated Alum Coagulation & Flocculation 150mg/L
Alum (Aluminum Sulfate) Coagulation & Flocculation 150 mg/L
Aluminum Sulfate - Low Iron Coagulation & Flocculation 150mg/L
Aluminum Sulfate Commercial Coagulation & Flocculation 150mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Tuscaloosa, AL


Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite[2] Dechlorination 50mg/L
Sodium Bisulfite 36% Catalyzed Dechlorination 50mg/L
Sodium Bisulfite Catalyzed 36% Dechlorination 50mg/L
Sodium Bisulfite Solution[2] Dechlorination 50mg/L
Sodium Bisulfite Solution 40%, Technical Grade Dechlorination 50mg/L 

[1] This product contains sulfite.
    Sulfites have been known to cause lethal allergic
    reactions in sulfite-sensitive individuals.
    The maximum recommended allowable residual
    sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[2] Product trade name may or may not include product strength.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Distribution Center - Augusta, GA


Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite[2] Dechlorination 50mg/L
Sodium Bisulfite 36% Catalyzed Dechlorination 50mg/L
Sodium Bisulfite Catalyzed 36% Dechlorination 50mg/L
Sodium Bisulfite Solution[2] Dechlorination 50mg/L
Sodium Bisulfite Solution 40%, Technical Grade Dechlorination 50mg/L 

[1] This product contains sulfite.
   Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
   The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[2] Product trade name may or may not include product strength.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Baton Rouge, LA


Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Activated Alum Coagulation & Flocculation 150mg/L
Alum (Aluminum Sulfate) Coagulation & Flocculation 150 mg/L
Aluminum Sulfate - Low Iron Coagulation & Flocculation 150mg/L
Aluminum Sulfate Commercial Coagulation & Flocculation 150mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite[2] Dechlorination 50mg/L
Sodium Bisulfite 36% Catalyzed Dechlorination 50mg/L
Sodium Bisulfite Catalyzed 36% Dechlorination 50mg/L
Sodium Bisulfite Solution[2] Dechlorination 50mg/L
Sodium Bisulfite Solution 40%, Technical Grade Dechlorination 50mg/L 

[1] This product contains sulfite.
    Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
    The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
    
[2] Product trade name may or may not include product strength.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Lake Charles, LA


Aluminum Chloride[AL]
Trade Designation Product Function Max Use
AFCO A45 Coagulation & Flocculation 200mg/L
Aluminum Chloride Coagulation & Flocculation 200mg/L
Aluminum Chloride - 29% Coagulation & Flocculation 200mg/L
Aluminum Chloride Solution Coagulation & Flocculation 200mg/L
Aluminum Chloride Solution - 29% Coagulation & Flocculation 200mg/L
Aluminum Chloride ex HCL Coagulation & Flocculation 200mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Alum (Aluminum Sulfate) Coagulation & Flocculation 150 mg/L
Aluminum Sulfate - Low Iron Coagulation & Flocculation 150mg/L
Aluminum Sulfate Commercial Coagulation & Flocculation 150mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Ammonium Hydroxide
Trade Designation Product Function Max Use
Ammonium Hydroxide Chloramination 10mg/L
Aqua Ammonia Chloramination 10mg/L
Aqua Cat® - 15% Chloramination 10mg/L
Aqua Cat® - 18% Chloramination 10mg/L
Aqua Cat® - 19% Chloramination 10mg/L
Aqua Cat® - 22.5% Chloramination 10mg/L
Aqua Cat® - 24% Chloramination 10mg/L
Aqua Cat® - 25% Chloramination 10mg/L
Aqua Cat® - 29% Chloramination 10mg/L
Aqua Cat® - 29.4% Chloramination 10mg/L
Aqua Cat® Ammonia Chloramination 10mg/L
Aqueous Ammonia - 18% Chloramination 10mg/L
Aqueous Ammonia - 19% Chloramination 10mg/L
Aqueous Ammonia - 20% Chloramination 10mg/L
Aqueous Ammonia - 22.5% Chloramination 10mg/L
Aqueous Ammonia - 24% Chloramination 10mg/L
Aqueous Ammonia - 25% Chloramination 10mg/L
Aqueous Ammonia - 28% Chloramination 10mg/L
Aqueous Ammonia - 29% Chloramination 10mg/L
Aqueous Ammonia - 29.4% Chloramination 10mg/L
Aqueous Ammonia - 5-15% Chloramination 10mg/L 

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Williamsport, MD


Miscellaneous Treatment Chemical
Trade Designation Product Function Max Use
Sodium Thiosulfate - 30% Dechlorination
Ozone Reduction		 50mg/L

Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite[2] Dechlorination 50mg/L
Sodium Bisulfite 36% Catalyzed Dechlorination 50mg/L
Sodium Bisulfite Catalyzed 36% Dechlorination 50mg/L
Sodium Bisulfite Solution[2] Dechlorination 50mg/L
Sodium Bisulfite Solution 40%, Technical Grade Dechlorination 50mg/L 

[1] This product contains sulfite.
   Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
   The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[2] Product trade name may or may not include product strength.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : West Point, MS


Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Activated Alum Coagulation & Flocculation 150mg/L
Alum (Aluminum Sulfate) Coagulation & Flocculation 150mg/L
Aluminum Sulfate - Low Iron Coagulation & Flocculation 150mg/L
Aluminum Sulfate Commercial Coagulation & Flocculation 150mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Calhoun, TN


Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Alum (Aluminum Sulfate) Coagulation & Flocculation 150 mg/L
Aluminum Sulfate - Low Iron Coagulation & Flocculation 150mg/L
Aluminum Sulfate Commercial Coagulation & Flocculation 150mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Miscellaneous Treatment Chemical[AL]
Trade Designation Product Function Max Use
FLUOR-SORB Coagulation & Flocculation 150mg/L
PHOS-SORB® Coagulation & Flocculation 150mg/L
ph-SORB Coagulation & Flocculation 150mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Sodium Aluminate[AL]
Trade Designation Product Function Max Use
Sodium Aluminate Coagulation & Flocculation 105mg/L
Sodium Aluminate 38% stabilized Coagulation & Flocculation 105mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite[2] Dechlorination 50mg/L
Sodium Bisulfite 36% Catalyzed Dechlorination 50mf/L
Sodium Bisulfite Catalyzed 36% Dechlorination 50mg/L
Sodium Bisulfite Solution[2] Dechlorination 50mg/L
Sodium Bisulfite Solution 40%, Technical Grade Dechlorination 50mg/L 

[1] This product contains sulfite.
    Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
    The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
    
[2] Product trade name may or may not include product strength.


NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

Facility : Pasadena, TX


Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Activated Alum Coagulation & Flocculation 150mg/L
Alum (Aluminum Sulfate) Coagulation & Flocculation 150 mg/L
Aluminum Sulfate - Industrial Coagulation & Flocculation 150mg/L
Aluminum Sulfate - Low Iron Coagulation & Flocculation 150mg/L
Aluminum Sulfate Commercial Coagulation & Flocculation 150mg/L
Aluminum Sulfate ex Sulfuric Coagulation & Flocculation 150mg/L 

[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
     drinking water shall not exceed 2 mg/L.

Ammonium Hydroxide
Trade Designation Product Function Max Use
Ammonium Hydroxide Chloramination 10mg/L
Aqua Ammonia Chloramination 10mg/L
Aqua Cat® - 15% Chloramination 10mg/L
Aqua Cat® - 18% Chloramination 10mg/L
Aqua Cat® - 19% Chloramination 10mg/L
Aqua Cat® - 22.5% Chloramination 10mg/L
Aqua Cat® - 24% Chloramination 10mg/L
Aqua Cat® - 25% Chloramination 10mg/L
Aqua Cat® - 29% Chloramination 10mg/L
Aqua Cat® - 29.4% Chloramination 10mg/L
Aqua Cat® Ammonia Chloramination 10mg/L
Aqueous Ammonia - 18% Chloramination 10mg/L
Aqueous Ammonia - 19% Chloramination 10mg/L
Aqueous Ammonia - 20% Chloramination 10mg/L
Aqueous Ammonia - 22.5% Chloramination 10mg/L
Aqueous Ammonia - 24% Chloramination 10mg/L
Aqueous Ammonia - 25% Chloramination 10mg/L
Aqueous Ammonia - 28% Chloramination 10mg/L
Aqueous Ammonia - 29% Chloramination 10mg/L
Aqueous Ammonia - 29.4% Chloramination 10mg/L
Aqueous Ammonia - 5-15% Chloramination 10mg/L

Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite[2] Dechlorination 50mg/L
Sodium Bisulfite 36% Catalyzed Dechlorination 50mg/L
Sodium Bisulfite 40%-RM Dechlorination 50mg/L
Sodium Bisulfite Catalyzed 36% Dechlorination 50mg/L
Sodium Bisulfite Solution[2] Dechlorination 50mg/L
Sodium Bisulfite Solution 40%, Technical Grade Dechlorination 50mg/L 

[1] This product contains sulfite.
   Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
   The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
[2] Product trade name may or may not include product strength.

Sodium Carbonate
Trade Designation Product Function Max Use
Soda Ash Solution Corrosion & Scale Control
pH Adjustment		 286mg/L 

NOTE: Only products bearing the NSF Mark on the product, product packaging, and/or
      documentation shipped with the product are Certified.

 
Southern Ionics Incorporated 
579 Commerce Street
West Point, MS 39773 
United States 
800-953-3585 
662-494-3055
Visit this company's website

Facility : # 6 USA


Sodium Bisulfite[1]
Trade Designation Product Function Max Use
Sodium Bisulfite 40% Dechlorination 50mg/L
Sodium Bisulfite 40% - RM Dechlorination 50mg/L
Sodium Bisulfite Solution Dechlorination 50mg/L 

[1] This product contains sulfite.
    Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
    The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).


 
Southern Ionics Incorporated 
579 Commerce Street
West Point, MS 39773 
United States 
866-204-2850 
662-494-3055
Visit this company's website

Facility : # 4 USA


Sodium Bisulfite[1]
Trade Designation Product Function Max Use
SI - Bright T Dechlorination 50mg/L
Sodium Bisulfite 40% Dechlorination 50mg/L
Sodium Bisulfite 40% - RM Dechlorination 50mg/L
Sodium Bisulfite Solution Dechlorination 50mg/L 

[1] This product contains sulfite.
   Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
   The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).


Facility : # 5 USA


Sodium Bisulfite[1]
Trade Designation Product Function Max Use
SI - Bright T Dechlorination 50mg/L
Sodium Bisulfite 40% Dechlorination 50mg/L
Sodium Bisulfite 40% - RM Dechlorination 50mg/L
Sodium Bisulfite Solution Dechlorination 50mg/L 

[1] This product contains sulfite.
   Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
   The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).


Facility : # 8 USA


Sodium Bisulfite[1]
Trade Designation Product Function Max Use
SI - Bright T Dechlorination 50mg/L
Sodium Bisulfite 40% Dechlorination 50mg/L
Sodium Bisulfite 40% - RM Dechlorination 50mg/L
Sodium Bisulfite Solution Dechlorination 50mg/L 

[1] This product contains sulfite.
   Sulfites have been known to cause potentially lethal
    allergic reactions in sulfite-sensitive individuals.
   The maximum recommended allowable
    residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).

Number of matching Manufacturers is 3
Number of matching Products is 137
Processing time was 1 seconds