NSF Product and Service Listings

These NSF Official Listings are current as of Wednesday, July 2, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=03390&Standard=061&

NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

Component Hardware Group, Inc.
6732 Shook Road
Columbus, OH 43217
United States
800-526-3694
732-363-4700
Visit this company's website

Facility : Columbus, OH

Mechanical Plumbing Devices

Trade Designation
Commercial Faucets[1]
KC50-1XXX-YYYYY[G] [Q] [20]
KC53-1XXX-YYYYY[G] [Q] [20]
KC56-1XXX-YYYYY[G] [Q] [20]
KC60-1XXX-YYYYY[G] [Q] [20]
KC63-1XXX-YYYYY[G] [Q] [20]
KC66-1XXX-YYY[G] [Q] [20]
KC69-1XXX-YYYYY[G] [Q] [20]
KC71-1XXX-YYYYY[G] [Q] [20]
KC73-1XXX-YYYYY[G] [20]
KCP50-1XXX-YYYYY[G] [21]
KCP53-1XXX-YYYYY[G] [21]
KCP56-1XXX-YYYYY[G] [21]
KCP60-1XXX-YYYYY[G] [21]
KCP63-1XXX-YYYYY[G] [21]
KCP69-1XXX-YYYYY[G] [21]
KCP71-1XXX-YYYYY[G] [21]
KCP73-1XXX-YYYYY[G] [21]
KL33-9xxx-yyy[G] [Q] [22]
KL34-1XXXX-YYY Series[G] [Q] [44]
KL34-5660-PS[G] [Q]
KL34-8xxx-yyy[G] [Q] [46]
KL35-7XXX-YYY[Q] [47]
KL35-9XXX-YYY[Q] [47]
KL41-20xxVByy[G] [Q] [23] [24]
KL43-4050-PFDI[Q]
KL50-2000 DOUBLE PANTRY UTILITY SPRAY[G]
KL50-2000-VB DOUBLE PANTRY UTILITY SPRAY W/ VACUUM BREAKER[G]
KL50-3000 DOUBLE PANTRY POT FILLER[G]
KL50-3000-VB DOUBLE PANTRY POT FILLER W/ VACUUM BREAKER[G]
KL50-9-857739[G] [Q]
KL50-9-857740[G]
KL50-9-857741[G]
KL51-XXXX-YYY Series[G] [Q] [32]
KL52-9-857736[1] [G] [Q]
KL52-9-857738[1] [G] [Q]
KL53-2000 WALL MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS[G]
KL53-2000-VB WALL MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL53-3000 WALL MOUNT POT FILLER 8"[200mm] ADJ. CENTERS[G]
KL53-3000-PFDI-VB[Q]
KL53-3000-VB WALL MOUNT POT FILLER 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL54-XXXX-YYY Series[G] [Q] [35]
KL56-2000 DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS[G]
KL56-2000-VB DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL56-3000 DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS[G]
KL56-3000-VB DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL57-XXXX-YYY Series[G] [Q] [36]
KL60-2000 DECK MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS[G]
KL60-2000-VB DECK MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL60-3000 DECK MOUNT POT FILLER 8"[200mm] ADJ. CENTERS[G]
KL60-3000-VB DECK MOUNT POT FILLER 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL61-XXXX-YYY Series[G] [Q] [37]
KL63-2000 SINGLE PANTRY UTILITY SPRAY[G]
KL63-2000-VB SINGLE PANTRY UTILITY SPRAY W/ VACUUM BREAKER[G]
KL63-3000 SINGLE PANTRY POT FILLER[G]
KL63-3000-VB SINGLE PANTRY POT FILLER W/ VACUUM BREAKER[G]
KL64 MV Encore Series Single Pantry w/ Mixing Valve[G]
KL64-XXXX-YYY Series[G] [Q] [38]
KL65-9-857735[1] [G] [Q]
KL65-9-857737[1] [G] [Q]
KL67-XXXX-YYY Series[G] [Q] [39]
KL69-2000-VB SINGLE WALL MOUNT UTILITY SPRAY W/ VACUUM BREAKER[G]
KL69-2000-VB SINGLE WALL MOUNT UTILITY SPRAY W/ VACUUM BREAKER - copy[G]
KL69-3000 SINGLE WALL MOUNT POT FILLER[G]
KL69-3000-VB SINGLE WALL MOUNT POT FILLER W/ VACUUM BREAKER[G]
KL70-XXXX-YYY Series[G] [Q] [40]
KL71-2000 WALL MOUNT BASE UTILITY SPRAY[G]
KL71-2000-VB WALL MOUNT BASE UTILITY SPRAY W/ VACUUM BREAKER[G]
KL71-3000 WALL MOUNT BASE POT FILLER[G]
KL71-3000-VB WALL MOUNT BASE POT FILLER W/ VACUUM BREAKER[G]
KL72-XXXX-YYY Series[G] [Q] [41]
KL73-2000 DECK MOUNT BASE UTILITY SPRAY[G]
KL73-2000-VB DECK MOUNT BASE UTILITY SPRAY W/ VACUUM BREAKER[G]
KL73-3000 DECK MOUNT BASE POT FILLER[G]
KL73-3000-VB DECK MOUNT BASE POT FILLER W/ VACUUM BREAKER[G]
KL74-XXXX-YYY Series[G] [Q] [42]
KL76-XXXX-YYY Series[G] [Q] [43]
KLF34-1xxx-yyyy[G] [Q] [79]
KLF35-1xxx-yyyy[G] [Q] [80]
KLF50-1xxx-yyyy[G] [Q] [81]
KLF53-1xxx-yyyy[G] [Q] [82]
KLF56-1xxx-yyyy[G] [Q] [83]
KLF60-1xxx-yyyy[G] [Q] [84]
KLF63-1xxx-yyyy[G] [Q] [85]
KLF66-1xxx-yyyy[G] [Q] [86]
KLF69-1xxx-yyyy[G] [Q] [87]
KLF71-1xxx-yyyy[G] [Q] [88]
KLF73-1xxx-yyyy[G] [Q] [89]
KLP34-1XXX-YYY Series[Q] [45]
KLP34-5660-PFD[Q]
KLP34-5660-PFDI-AVD[Q]
KLP34-5660-PFDI-AVD1[Q]
KLP53-2300-PFDI-VB[Q]
KLP53-5545-PFDI-AVB[Q]
KLP53-5660-PFDI[Q]
KLP53-5660-PFDI-AVB[Q]
KLP53-5660-PFDIDJ[Q]
KPV-X001 Pot Filler[G]
TLL13-1xxx-yyyyy[G] [Q] [55]
TLL13-8xxx-yyy Series[G] [Q] [56]
TLL20-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [57]
TLL50-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [60]
TLL52-9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [62]
TLL55-7xxx-yyyy TOPLINE ADD-ON FAUCET W/ SPOUT ASSEMBLIES Series[Q] [63]
TLL57-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [64]
TLL58-4x1x2x3-y1y2y3 Top Lines Series[G] [Q] [66]
TLL61-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [67]
TLL62-8x1x2x3-y1y2y3 Top Lines Series[G] [Q] [69]
TLL65-9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [70]
TLL70-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [71]
TLP13-1XXX-YYYYY[G] [Q] [73]
TLP20-1XXX-YYYYY[G] [Q] [74]
TLP50-1XXX-YYYYY[G] [Q] [75]
TLP57-1XXX-YYYYY[G] [Q] [76]
TLP61-1XXX-YYYYY[G] [Q] [77]
TLP70-1XXX-YYYYY[G] [Q] [78]
[1] Z - Special packaging
Commercial Kitchen and Bar Endpoint Devices[1]
KL34-5500-PS[G] [Q]
KL34-5622-PS[G] [Q]
KL34-8014-PS[G] [Q]
KL34-8014-PSP[G]
KL50-1XXX-YYY[G] [Q] [16]
KL52-9XXX-YYY[G] [Q] [48]
KL53-1XXX-YYY[G] [Q] [16]
KL53-5500-PS[G] [Q]
KL53-5555-PS[G]
KL53-5614-PS[G]
KL53-5622-PS[G] [Q]
KL55-7XXX-YYY[G] [Q] [49]
KL56-1XXX-YYY[G] [Q] [16]
KL58-4XXX-YYY[G] [Q]
KL60-1XXX-YYY[G] [Q] [16]
KL62-8XXX-YYY[G] [Q] [51]
KL63-1XXX-YYY[G] [Q] [16]
KL65-9XXX-YYY[G] [Q] [52]
KL65-9XXX-YYYMV[G] [Q] [52]
KL66-1XXX-YYY[G] [Q] [16]
KL69-1XXX-YYY[G] [Q] [16]
KL71-1XXX-YYY[G] [Q] [16]
KL73-1XXX-YYY[G] [Q] [16]
KLP50-1XXX-YYYYY[Q] [19]
KLP53-1XXX-YYYYY[Q] [19]
KLP56-1XXX-YYYYY[Q] [19]
KLP60-1XXX-YYYYY[Q] [19]
KLP63-1XXX-YYYYY[Q] [19]
KLP66-1XXX-YYY[G] [Q] [19]
KLP69-1XXX-YYYYY[Q] [19]
KLP71-1XXX-YYYYY[Q] [19]
KLP73-1XXX-YYYYY[Q] [19]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [16] KL-xxxx-yyyyy where: x1 = 1 (Pre-Rinse) x2 = 0 (compression valves) x3x4 = spout lengths up to 28"" y1y2y3 or y1y2y3y4y5 = Can include ANY combination(s) of the following: y1 - S (Swivel Spout) y2 - 0 (no aerator) y3 - 1 (Lever Handle) 2 (Cross Handle) 4 (4" Wrist Handle) 5 (Lever Handle W/ Tamper Proof Screw) 6 (6" Wrist Handle) 7 (4" Wrist Handle W/ Tamper Proof Screw) 8 (6" Wrist Handle W/ Tamper Proof Screw) (Blank) - Default BR - Wall Bracket BS - Wall Bracket w/ S/S Spring B60 - Wall Bracket W/ 60"" Hose B60Z - Wall Bracket W/ 60"" Hose & Special Packaging FG - Customer Code AF1 – Add-on Faucet w/6” Spout AF2 – Add-on Faucet w/8” Spout AF3 – Add-on Faucet w/10” Spout AF4 – Add-on Faucet w/12” Spout AF5 – Add-on Faucet w/14” Spout AF6 – Add-on Faucet w/16” Spout AF7 – Add-on Faucet w/18” Spout MK - Mounting Kit (KL40-3400 or KL40-3410) 01 to 99 number strings - Customer Codes AA thru YY character strings - Cuustomer Codes Z - Suffix denotes special packaging as an option [19] Pre-Rinse Assemblies using Power Pulse Spray Assembly will follow the format KLPnn-1xxx-yyyyy where: nn - 50, 53, 56, 60, 63, 66, 69, 71, 73 x1 - 1 (Pre-Rinse) x2 - 0 (compression valve) 1 (ceramic valve) x3x4 - L1 (.45 GPM Power pulse spray) L2 (.65 GPM Power pulse spray) L3 (.74 GPM Power pulse spray) L4 (1.05 GPM Power pulse spray) yyyyy - AF1 – Add-on faucet w/6" spout AF2 – Add-on faucet w/8" spout AF3 – Add-on faucet w/10" spout AF4 – Add-on faucet w/12" spout AF5 – Add-on faucet w/14" spout AF6 – Add-on faucet w/16" spout AF7 – Add-on faucet w/18" spout (Blank) – w/o wall bracket BR – w/ wall bracket MK – Mounting kit [48] KLnn-XXXX-YYY nn = Type 52 – Double Pantry Faucet W/ Elevated Swing Spout 58 – 4” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout 62 – 8” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout 65 – Single Pantry Faucet W/ Elevated Swing Spout 65 – Single Pantry Faucet W/ Elevated Swing Spout & Mixing Valve X1 = Inlet 4 – 4” Deck Mount Faucet 8 – 8” Deck Mount Faucet 9 – Single or Double Pantry Faucet X2 = Valve Type 0 – Compression 1 – Ceramic X3X4 = Spouts 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 26 – 26” Spout 28 – 28” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw [49] KLnn-xxxx-yyy: X1 = 7 (Add-on Faucet) X2 = 0 (Compression Valve) X3x4 = Spouts 00 – Standard 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw [51] KLnn-XXXX-YYY nn = Type 62 – 8” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout X1 = Inlet 4 – 4” Deck Mount Faucet 8 – 8” Deck Mount Faucet 9 – Single or Double Pantry Faucet X2 = Valve Type 0 – Compression 1 – Ceramic X3X4 = Spouts 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 26 – 26” Spout 28 – 28” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw [52] KLnn-XXXX-YYY nn = Type 65 – Single Pantry Faucet W/ Elevated Swing Spout X1 = Inlet 4 – 4” Deck Mount Faucet 8 – 8” Deck Mount Faucet 9 – Single or Double Pantry Faucet X2 = Valve Type 0 – Compression 1 – Ceramic X3X4 = Spouts 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 26 – 26” Spout 28 – 28” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw
[1] Z - Special packaging
Faucet Aerator[1] [2] [3]
KN50-X201-H Vandal Proof Aerator Kit[G]
KN50-X203-B 1.0gpm Laminar VR[G]
KN50-X203-C 1.0 gpm AERATED STREAM VR[G]
KN50-X203D 1.5 GPM AERATED STREAM VR[G]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
[1] Z - Special packaging [2] Optional exterior coating SANI-GUARD™. [3] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Faucet Body[1]
KL-19-Y003 Deck Mount Body with Sensor Assembly[G]
KL19-Y004 Wall Mount Body with Sensor Assembly[G]
KL21-Y002 Deck Mount Body with Sensor Assembly[G]
KL41-Y002[9] [Q]
KL41-Y002-U-MK1[9]
KL41-Y003[9] [Q]
KL41-Y003-U-MK1[9]
KL43-4050
KL45-Y002[9] [Q]
KL45-Y002-GT[9] [Q]
KL45-Y002-P[9] [Q]
KL45-Y003[9] [Q]
KL50-Y101 Series Encore Double Pantry Base[G] [Q]
KL51-Y101 Series Encore Double Pantry Base[G]
TLL13-Y001[3] [G]
TLL13-Y001-C Top-Line 8'' Wall Mount Faucet Assembly[Q]
TLL13-Y001-CCV Top-Line 8'' Wall Mount Faucet Assembly[Q]
TLL15-Y001[G]
TLL15-Y001-C 4” Wall Mount Faucet Body[Q]
TLL15-Y001-CCV 4” Wall Mount Faucet Body[Q]
TLL20-X001[3] [G] [Q]
[3] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [9] Knnn - X1X2X3X4-Y1Y2Y3: nnn - Faucet series L41 - Encore deck mount faucet L45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Standard Encore® Compression Valve 1 - 1/4 Turn Encore® Ceramic Valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser "-" – Universal Type Faucet Body (When Required): U - 1/2" NPSM inlets with Straight Fittings (for KL41 Series) U - 1/2" NPSM inlets with 90° Swivel Spout Base & Elbow Fittings (for KL45 Series) Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
[1] Z - Special packaging
Faucet Spouts[1] [2] [3]
KL11-X801 8" Swivel Arched Cast Spout Assembly[G] [Q]
KL11-X803 8" High Arc Tubular Spout Assembly[G] [Q]
KL11-Y250-G Swing Nozzle Vacuum Breaker w/ 6" Spout[G] [Q]
KL11-Y251-G Swing Nozzle Vacuum Breaker w/ 8" Spout[G] [Q]
KL11-Y252-G Swing Nozzle Vacuum Breaker w/ 12" Spout[G] [Q]
KL11-Y253-G 9" Swivel - Vacuum Breaker w/ 6" Spout[G] [Q]
KL11-Y253-K 9" Rigid Vacuum Breaker w/ 6" Spout[G] [Q]
KL11-Y254-G 9" Swivel - Vacuum Breaker w/ 8" Spout[G] [Q]
KL11-Y254-K 9" Rigid Vacuum Breaker w/ 8" Spout[G] [Q]
KL11-Y255-G 9" Swivel - Vacuum Breaker w/ 12" Spout[G] [Q]
KL11-Y255-K 9" Rigid Vacuum Breaker w/ 12" Spout[G] [Q]
KL11-Y309 9" Swivel Arched Tubular Spout Assembly[G] [Q]
KL11-Y406 6" Horizontal Cast Spout Assembly[G] [Q]
KL11-Y408 8" Horizontal Cast Spout Assembly[G] [Q]
KL11-Y413 13" Cast Double Jointed Swing Spout Assembly[G] [Q]
KL11-Y415 15" Cast Double Jointed Swing Spout Assembly[G] [Q]
KL11-Y418 18" Cast Double Jointed Swing Spout Assembly[G] [Q]
KL11-Y420 20" Cast Double Jointed Swing Spout Assembly[G] [Q]
KL34-1014-FG Pre-Rinse Assembly[G]
KL34-Y010 10" Straight Spout[G] [Q]
KL34-Y012 12" Straight Spout[G] [Q]
KL34-Y014 14" Straight Spout[G] [Q]
KL34-Y018 18" Straight Spout[G] [Q]
KL34-Y020 20" Double Jointed Spout[G] [Q]
KL34-Y022 22" Double Jointed Spout[G] [Q]
KL34-Y024 24" Double Jointed Spout[G] [Q]
KL34-Y028 28" Double Jointed Spout[G] [Q]
KL34-Y110 10" Spout Extension[G] [Q]
KL35-Y006 6-1/2" Swivel Spout For 3/4" Inlet Faucet[5] [G]
KLP34-1014-FG Pre-Rinse Assembly[G]
KLP34-1014-FG1 Pre-Rinse Assembly[G]
KLP34-1014-FG2 Pre-Rinse Assembly[G]
KLP34-1014-FG3 Pre-Rinse Assembly[G]
KS11-06-X000 3 1/2" Swivel Gooseneck Spout[4] [G] [Q]
KS11-06-X001 8 1/2" Swivel Gooseneck Spout[4] [G] [Q]
KS11-06-X002 6" Swivel Gooseneck Spout[4] [G] [Q]
KS11-06-X006 6" Swivel Spout[4] [G] [Q]
KS11-06-X008 8" Swivel Spout[4] [G] [Q]
KS11-06-X010 10" Swivel Spout[4] [G] [Q]
KS11-06-X012 12" Swivel Spout[4] [G] [Q]
KS11-06-X014 14" Swivel Spout[4] [G] [Q]
KS11-06-X016 16" Swivel Spout[4] [G] [Q]
KS11-06-X018 18" Double Jointed Spout[4] [G] [Q]
KS11-06-X020 20" Double Jointed Spout[4] [G] [Q]
KS11-06-X022 22" Double Jointed Spout[4] [G] [Q]
KS11-06-X024 24" Double Jointed Spout[4] [G] [Q]
KS11-06-X026 26" Double Jointed Spout[4] [G] [Q]
KS11-06-X028 28" Double Jointed Spout[4] [G] [Q]
KS11-06-X100 3 1/2" Rigid Gooseneck Spout[4] [G] [Q]
KS11-06-X101 8 1/2" Rigid Gooseneck Spout[4] [G] [Q]
KS11-06-X102 6" Rigid Gooseneck Spout[4] [G] [Q]
KS11-06-X112 12" Spout Extension[4] [G] [Q]
KS11-12-X000 3 1/2" Swivel Gooseneck Spout[4] [G] [Q]
KS11-12-X001 8 1/2" Swivel Gooseneck Spout[4] [G] [Q]
KS11-12-X002 6" Swivel Gooseneck Spout[4] [G] [Q]
KS11-12-X006 6" Swivel Spout[4] [G] [Q]
KS11-12-X008 8" Swivel Spout[4] [G] [Q]
KS11-12-X010 10" Swivel Spout[4] [G] [Q]
KS11-12-X012 12" Swivel Spout[4] [G] [Q]
KS11-12-X014 14" Swivel Spout[4] [G] [Q]
KS11-12-X016 16" Swivel Spout[4] [G] [Q]
KS11-12-X018 18" Double Jointed Spout[4] [G] [Q]
KS11-12-X020 20" Double Jointed Spout[4] [G] [Q]
KS11-12-X022 22" Double Jointed Spout[4] [G] [Q]
KS11-12-X024 24" Double Jointed Spout[4] [G] [Q]
KS11-12-X026 26" Double Jointed Spout[4] [G] [Q]
KS11-12-X028 28" Double Jointed Spout[4] [G] [Q]
KS11-12-X100 3 1/2" Rigid Gooseneck Spout[4] [G] [Q]
KS11-12-X101 8 1/2" Rigid Gooseneck Spout[4] [G] [Q]
KS11-12-X102 6" Rigid Gooseneck Spout[4] [G] [Q]
KS11-12-X103 6" Rigid Gooseneck Spout Assembly[G] [Q]
KS11-12-X106 6" Spout Extension[4] [G] [Q]
KS11-12-X112 12" Spout Extension[4] [G] [Q]
KS11-12-X12DJ Double Jointed Spout[4] [G] [Q]
KS11-12-X18A 18" Long Swivel Spout[4] [G] [Q]
KS11-12X00212 Speciial 6" Gooseneck Spout Assembly[4] [G] [Q]
KS11-12X00213 Speciial 6" Angled Gooseneck Spout Assembly[4] [G] [Q]
[4] 06 - 0.6 mm Spout Tube Thickness 12 - 1.2 mm Spout Tube Thickness [5] xxx - represents different spout lengths up to 18'' yyy - represents optional mounting kits and alternate handles, aerators, and spout styles Faucet Assemblies will follow the format KLnn-9xxx-yyyyy where: nn = 35 (Encore® Quik-Fil 3/4'' Faucet) 9 = 9 (Single Wall Mount) x2 = 0 (compression valve) x3x4 = 06 – 6” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 28 – 28” Spout y1y2y3y4y5 = Note: Can include ANY combination(s) of the following: (Blank) – Default y1 – S (Swivel Spout) y2 – 0 (no aerator) y3 – 1 (Lever Handles), 2 (Cross Handles), 4 (4” Wrist Handles), 6 (6” Wrist Handles) MK – Mounting Kit 01 To 99 or A thru Y character string – Customer Code Optional – Z suffix denotes special packaging as an option [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
[1] Z - Special packaging [2] Optional exterior coating SANI-GUARD™. [3] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Faucets[1]
KEXX-XXXX-YYZ ELECTRONIC WIDE SPREAD FAUCETS+ ¢ § [6] [G]
KHL81-4XXX-CYY[7] [G]
KHL81-9XXX-CYY[7] [G]
KL18-3170 Single Spout Swing Faucet[2] [8] [G] [Q]
KL22-3100[2] [8] [G] [Q]
KL22-3100-SB[2] [8] [G] [Q]
KL41-4xxxUyyy[9]
KL41-8xxxUyyy[9]
KL41-NXXX-YYY Series[G] [Q] [16]
KL45-4xxxUyyy[9]
KL45-5000[Q]
KL45-8xxxUyyy[9]
KL45-NXXX-YYY Series[G] [Q] [16]
KL454xxxyyyGT[9]
KL454xxxyyyP[9]
KL50-Y001 Double Pantry Faucet Assembly[G] [Q]
KL53-Y001 Wall Mount Faucet Assembly[G]
KL54-Y001 Wall Mount Faucet Assembly[G]
KL81-4005-CE1[Q]
KL81-4005-SB[7] [G] [Q]
KL81-4XXX-CYY[7] [G]
KL81-9005-CE1[Q]
KL81-9XXX-CYY[7] [G]
KL83-NXXX-YYY[G] [10]
KL84-NXXX-YYY[G] [11]
KL85-NXXX-YYY[G] [10]
KL86-NXXX-YYY[G] [11]
KL87-8205-CE Angled Metering Valve w/ Metering Handle (Cold Valve)[G]
KL87-8205-HE Angled Metering Valve w/ Metering Handle (Hot Valve)[G]
KL87-8205-UE Angled Metering Valve w/ Metering Handle (Universal)[G]
KL87-8245-CE Angled Metering Valve w/ 8" Deck Plate and Metering Handle (CV)[G]
KL87-8245-HE Angled Metering Valve w/ 8" Deck Plate and Metering Handle (HV)[G]
KL87-9005-CE1 Single Post Basin Tap w/ Lever Handle (Compression Cold Valve)[G]
KL87-9005-CE2 Single Post Basin Tap w/ Cross Handle (Compression Cold Valve)[G]
KL87-9005-CE4 Single Post Basin Tap w/ 4" Wrist Blade Handle (CCV)[G]
KL87-9005-HE1 Single Post Basin Tap w/ Lever Handle (Compression Hot Valve)[G]
KL87-9005-HE2 Single Post Basin Tap w/ Cross Handle (Compression Hot Valve)[G]
KL87-9005-HE4 Single Post Basin Tap w/ 4" Wrist Blade Handle (CHV)[G]
KL87-9105-CE1[G]
KL87-9105-CE2[G]
KL87-9105-CE4[G]
KL87-9105-HE1[G]
KL87-9105-HE2[G]
KL87-9105-HE4[G]
KL87-9205-CE Single Post Basin Tap w/ Metering Handle (Metering Cold Valve)[G]
KL87-9205-HE Single Post Basin Tap w/ Metering Handle (Metering Hot Valve)[G]
KL87-9205-UE Single Post Basin Tap w/ Metering Handle (Universal Metering Valve)[G]
KPL81-4XXX-CYY[7] [G]
KPL81-9XXX-CYY[7] [G]
KPL85-NXXX-YYY[G] [10]
KPL86-NXXX-YYY[G] [11]
KPL86-NXXX-YYY[G] [12]
KPV-X001 Pot Filler[2] [8]
TLL11-4XXX-YYY 4" Deck Mount Faucet[G] [Q] [53]
TLL11-8XXX-YYY 8" Deck Mount Faucet[G] [Q] [54]
TLL13-8XXX-YYY 8" Wall Mount Faucet[G] [13]
TLL15-4106-SE1Z[G] [Q]
TLL15-4XXX-YYY 4" Wall Mt/Backsplash Hand Sink Faucet[G] [Q] [14]
TLL20 9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [59]
TLL20-8XXX-YYY Series[G] [Q] [58]
TLL50-9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [61]
TLL57-4x1x2x3-y1y2y3 Top Lines Series[G] [Q] [65]
TLL61-8x1x2x3-y1y2y3 Top Lines Series[G] [Q] [68]
TLL70-9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [72]
[1] Z - Special packaging
Flexible Plumbing Connectors[1] [G]
KL50-Y004-20 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-20U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-26 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-26U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-44 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-44U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-60 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-60U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-72 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-72U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-96 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-96U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y010-20 20" Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-26 26" Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-32 32'' Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-44 44" Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-60 60" Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-96 96" Pre-Rinse Hose (No Grip)[Q]
KL81-Y020 20" Supply Hose
Kl50-Y010-72 72" Pre-Rinse Hose (No Grip)[Q]
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
[1] Z - Special packaging [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Glass Fillers[1] [2] [G] [Q]
KL26-5000
KL26-5000-SP2
KL26-5001
KL26-5012
KL26-5012-SP
KL26-5014
KL26-5015-SP
[1] Z - Special packaging [2] Optional exterior coating SANI-GUARD™. [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
Miscellaneous Faucet Components[1]
KL09-X001 Sink Outlet[G]
KL11-0010 Repair Kit[3] [G]
KL11-Y204 Adapter, Serrated Spout Outlet[G] [Q]
KL11-Y208 Serrated Spout Outlet Assembly[G] [Q]
KL11-Y507 7" Cast Extension Arm Assembly[G] [Q]
KL11-Y512 12" Cast Extension Arm Assembly[G] [Q]
KL13-0010 Repair Kit[3] [Q]
KL18-0010 Repair Kit[2] [G] [Q]
KL19-X001 WALL MOUNT BODY WITH SENSOR ASSEMBLY[G]
KL19-X002 SOLENOID[G]
KL19-X004 DECK MOUNT BODY WITH SENSOR ASSEMBLY[G]
KL19-X025 THERMOSTATIC MIXING VALVE[G]
KL19-X026 Thermostatic Mixing Valve[G]
KL21-Y001 DECK MOUNT BODY WITH SENSOR ASSEMBLY[G]
KL22-0010[2] [G] [Q] [31]
KL24-1100 Short Pedal Valve Assembly[1] [3] [G] [Q]
KL24-1200 Pedal Valve Assembly, Shelf Mount[1] [3] [G] [Q]
KL24-1302 Extended Pedal Valve Wall Mount w/ Stops[1] [3] [G] [Q] [34]
KL25-1000 Dual Pedal Foot Control Valve Assembly[G] [Q]
KL25-2000 Single Pedal Foot Control Valve Assembly[G] [Q]
KL25-3000 Dual Pedal Knee Control Valve Assembly[G] [Q]
KL25-4000 Single Pedal Knee Control Valve Assembly[G] [Q]
KL26-0010 Glass Filler Repair Kit[2] [G] [Q]
KL35-7010 10" Quik-Fil 3/4" Add-on Faucet w/ 10" Spout[G]
KL35-7012 12" Quik-Fil 3/4" Add-on Faucet w/ 12" Spout[G]
KL35-7014 14" Quik-Fil 3/4" Add-on Faucet w/ 14" Spout[G]
KL35-7018 18" Quik-Fil 3/4" Add-on Faucet w/ 18" Spout[G]
KL35-7020 20" Quik-Fil 3/4" Add-on Faucet w/ 20" Spout[G]
KL35-7022 22" Quik-Fil 3/4" Add-on Faucet w/ 22" Spout[G]
KL35-7024 24" Quik-Fil 3/4" Add-on Faucet w/ 24" Spout[G]
KL35-7028 28" Quik-Fil 3/4" Add-on Faucet w/ 28" Spout[G]
KL35-Y001 Quik-Fil 3/4" Add-on Faucet[G]
KL35-Y001 Quik-Fil 3/4" Add-on Faucet Assembly [Q]
KL35-Y004 3/4" Quik-Fil Single Wall Faucet Body Assembly[5] [G]
KL35-Y004 3/4" Quik-Fil Single Wall Mount Faucet Body Assembly[Q]
KL35-Y007 3/4" Add on Valve Assembly [Q]
KL35-Y007 3/4" Add-on Valve Assembly[5] [G]
KL35-Y226-2 Rigid Riser Assembly[Q]
KL40-0153
KL40-1000 Wall Faucet Mounting Kit[2] [G]
KL40-3400 3/4" IPS Mounting Kit[G] [Q]
KL40-3410 3/4" IPS Mounting Kit[G] [Q]
KL50-0200 Pre-Rinse Spray Valve Repair Kit[3] [G]
KL50-0220-FS Encore Fan Spray[G] [Q]
KL50-0220-FS-SS Encore Fans Spray (S/S Nozzle)[G] [Q]
KL50-X032 Spring Retainer[3] [G] [Q]
KL50-X075 Rigid to Swing Adapter[3] [G]
KL50-X077 18" Riser Assembly[3] [G]
KL50-X122 Swivel to Rigid Adapter Assembly[Q]
KL50-X127 1/4" NPT Hose Adapter[3] [G] [Q]
KL50-X128 3/8" NPT Hose Adapter[3] [G] [Q]
KL50-X129 1/2" NPT Hose Adapter[3] [G] [Q]
KL50-Y001 Double Pantry Faucet Body Assembly[Q]
KL50-Y001-CCV[G] [Q]
KL50-Y001-CCV Double Pantry Faucet Body Assembly[Q]
KL50-Y002 LF Pre-Rinse Spray Head Assembly[3] [G]
KL50-Y002-065 Spray Head Assembly[3] [G] [Q]
KL50-Y002-12 Spray Head Assembly[3] [G] [Q]
KL50-Y002-16 Spray Head Assembly[3] [G] [Q]
KL50-Y016-44 Pre Rinse Hose with Grip and Continuous Pressure Vacuum Breaker[Q]
KL50-Y027 Button Valve Assembly[3] [G] [Q]
KL50-Y030 Pre-Rinse Angled Spray Head Assembly[3] [G] [Q]
KL50-Y031 Pot Filler Spray Head Assembly[3] [G] [Q]
KL50-Y226-18 18" Pop & Lock Riser Assembly[G]
KL50-Y226-2 2" Pop & Lock Riser For Add-On Faucet[G]
KL50-Y226-24 24" Pop & Lock Riser Assembly[G]
KL50-Y226-26 26" Pop & Lock Riser Assembly[G]
KL50-Y226-32 32" Pop & Lock Riser Assembly[G]
KL53-Y001 Wall Mount Faucet Assembly[3] [G]
KL53-Y001 Wall Mount Faucet Body Assembly[Q]
KL53-Y001-CCV[Q]
KL53-Y001-CCV 8"OC Wall Mount Faucet Body [Q]
KL54-Y001 Wal Mount Faucet Body Assembly[Q]
KL54-Y001 Wall Mount Faucet Assembly[3] [G]
KL54-Y001-CCV Wall Mount faucet Body Assembly [Q]
KL55-Y001 Add-On Faucet Assembly[3] [G]
KL56-Y001 4in Deck Mount Faucet Body Assembly[Q]
KL56-Y001-CCV 4" Deck Mount Faucet Body Assembly[Q]
KL57-Y003 Encore 4" Base Faucet Body Assembly[3] [G]
KL60-Y001 8" Deck Mount Faucet Body Assembly [Q]
KL60-Y001-CCV 8" Deck Mount Faucet Body Assembly[Q]
KL60-Y010 Deck Mounting Kit[3] [G]
KL61-Y001 Encore Single Valve Deck Mount Faucet Body Assembly[3] [G]
KL63-Y001 Single Pantry Deck Mount Faucet Body Assembly[Q]
KL63-Y001-CCV Single Pantry Deck Mount Faucet Body Assembly[Q]
KL64-Y001 Encore 8" Deck Faucet Body Assembly[3] [G]
KL66-Y001 6'' Deck Mount Faucet Body Assembly[Q]
KL66-Y001-CCV 6'' Deck Mount Faucet Body Assembly [Q]
KL90-X015-M MANUAL MIXING VALVE[G]
KL90-X017-M "Y" SUPPLY INLET[G]
KL91-0100 Mechanical Hand-Wash Faucet[2] [3] [G] [Q]
KL91-Y003 Adapter Kit[2] [3] [G] [Q]
KLF-0300-A Variable Flow Spray Head Repair Kit[G] [27]
KLF-0300-B Variable Flow Spray Head Repair Kit[G] [27]
KLF-0410-x Variable Flow Pre-Rinse Spray Kit[G] [Q] [28]
KLF-Y104-x Variable Flow Pre-Rinse Spray Assembly[G] [Q] [29]
KLP50-0200xxx Spray Head Repair Kit[G] [30]
KLP50-0220xxx RETRO-FIT SPRAY VALVE[G] [30]
KLP50-0300xxx Spray Head Repair Kit[G] [30]
KLP50-Y002xxx Pre-Rinse Spray head[G] [Q] [30]
KN50-X025[Q]
KPV-X002 Pot Filler Outlet Control Valve[G]
KVB-6045-S-SD 45° Mount Severe Duty Vacuum Breaker Assembly[Q]
TLL-0010 Repair Kit[3] [Q]
TLL13-Y003-12 Pre-rinse Spray Valve Assembly[Q]
TLL13-Y003-16 Pre-rinse Spray Valve Assembly[Q]
TLL15-0010 Repair Kit[3] [G] [Q]
TLL50-X122 Swing to Rigid Adapter[3] [G]
[1] Z - Special packaging [2] Optional exterior coating SANI-GUARD™. [3] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [5] xxx - represents different spout lengths up to 18'' yyy - represents optional mounting kits and alternate handles, aerators, and spout styles Faucet Assemblies will follow the format KLnn-9xxx-yyyyy where: nn = 35 (Encore® Quik-Fil 3/4'' Faucet) 9 = 9 (Single Wall Mount) x2 = 0 (compression valve) x3x4 = 06 – 6” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 28 – 28” Spout y1y2y3y4y5 = Note: Can include ANY combination(s) of the following: (Blank) – Default y1 – S (Swivel Spout) y2 – 0 (no aerator) y3 – 1 (Lever Handles), 2 (Cross Handles), 4 (4” Wrist Handles), 6 (6” Wrist Handles) MK – Mounting Kit 01 To 99 or A thru Y character string – Customer Code Optional – Z suffix denotes special packaging as an option [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [27] x - Spray tip A - S/S spray tip (.61/.7/1.2) C - Brass spray tip (.61/.7/1.2) D - Brass spray tip (.61/.7/1.5) Note: Spray Head Repair Kit comes with bezel, spray tips, center screw, O-ring, plunger, spring, washer, and button valve. [28] x - Spray tip A - S/S spray tip (.61/.7/1.2) C - Brass spray tip (.61/.7/1.2) D - Brass spray tip (.61/.7/1.5) Note: Pre-Rinse Spray Kit comes complete with grip and adapters to fit other manufacturer's hoses. [29] x - Spray tip A - S/S spray tip (.61/.7/1.2) B - S/S spray tip (.61/.7/1.5) C - Brass spray tip (.61/.7/1.2) D - Brass spray tip (.61/.7/1.5) *Note: Pre-Rinse Spray Assembly comes with spray tips less grip and adapters. [30] xxx - -12, -25, -45, -65, -74, 105 and 152 [31] The KL22-0010 Dipper Well Faucet Handle Repair Kit meets the reduced Q test statistic criteria of 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [34] Includes locking stop valve assembly.
[1] Z - Special packaging
Pre-Rinse Hose Assembly[1] [Q]
KC50-Y004-20 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-20U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-26 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-26U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-44 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-44U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-60 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-60U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-72 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-72U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-96 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-96U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y010-20 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-26 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-44 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-60 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-72 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-96 Commercial Pre-Rinse Hose (No Grip)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
[1] Z - Special packaging [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
Vacuum Breakers[1]
KL50-X137 Atmospheric Vacuum Breaker 3/8" NPT[G]
KL50-X138 Atmospheric Vacuum Breaker 1/2" NPT[G]
KL50-X138-S-SD S/S Vac Breaker 1/2"NPT-Severe Duty[G]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
[1] Z - Special packaging
Valves[1] [3]
KL24-Y002 Stop Valve, Cold[G] [Q] [34]
KL24-Y003 Stop Valve, Hot[G] [Q] [34]
KL41-Y006 Cold Valve Assembly[G] [Q]
KL41-Y006-CV Hot Valve Assembly (Ceramic)[G] [Q]
KL41-Y007 Hot Valve Assembly[G] [Q]
KL41-Y007-CV Hot Valve Assembly (Ceramic)[G] [Q]
KL50-Y006-CCV Cold Valve Assembly with Built-In Check Valve[G] [Q]
KL50-Y007-CCV Hot Valve Assembly with Built-In Check Valve[G] [Q]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [34] Includes locking stop valve assembly.
[1] Z - Special packaging [3] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.

[15] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3:
     (N) INLET - 1, 2, 8, or 9
     (x1)   - 0
     (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28
     (y1)   - R or S
     (y2)   - A, B, C, D, E, or F
     (y3)   - 1 or 5
[17] Elevated Swing Spout Assemblies follow the format KLnn-X1X2X3X4: 
     nn   - 52, 58, 62, or 65 
     X1   - 9, 4, or 8 
     X2   - 0 or 1 
     X3X4 - 06, 08, 10, 12, 14, 16, or 18
[18] ADD-ON Faucets w/ Spout follow the format KL55-70xx 
     xx - 06, 08, 10, 12, 14, 16, or 18
[25] (TLLXX) Body 
     TL11 - CP polished deck mount 4" Center
     TL13 - CP polished wall mount 8" Center
     TLL20 - CP polished brass single pantry faucet
     TLL50 - CP polished brass 4" deck mount faucet
     TLL57 - CP polished brass 4" deck mount faucet
     TLL61 - CP polished brass 8" deck mount faucet
     TLL 70 - CP polished brass single hole wall mount faucet
     (N) Inlet
     1 - Pre-Rinse
     4 - 4" CTR - CTR inlets
     8 - 8" CTR - CTR inlets
     9 - Single hole mount
     (x1) Valve
     0 - Full turn compression valve
     1 - Ceramic Valve
     (x2x3) Spout
     00 - 3" Gooseneck
     01 - 8" Gooseneck
     02 - 6" Gooseneck
     06 - 6" Straight spout
     08 - 8" Straight spout
     10 - 10" Straight spout
     12 - 12" Straight spout
     14 - 14" Straight spout
     16 - 16" Straight spout
     18 - 18" Double swivel spout
     20 - 20" Double swivel spout
     22 - 22" Double swivel spout
     24 - 24" Double swivel spout
     26 - 26" Double swivel spout
     28 - 28" Double swivel spout
     (y1) Spout style
     R - Rigid tubular spout
     S - Swivel tubular spout
     (y2) Aerator
     A - 0.5 GPM PCA spray vandal resistant
     B - 1.5 GPM MAX laminar antimicrobial & vandal resistant
     C - 0.5 GPM PCA spray
     D - 1.5 GPM MAX laminar antimicrobial
     E - 2.2 GPM MAX eerated stream
     F - 2.2 GPM aerated stream vandal resistant
     (y3) Handle
     1 - STD Lever w/Saniguard
     5 - STD Lever (tamper-proof)
[26] Pre-Rinse Assemblies using Power Pulse Spray Assembly will follow the format
     TLPXX-Nx1x2x3-y1y2y3y4y5 where:
     XX - 13, 20, 50, 57, 61, 70
     N - 1 (Pre-Rinse)
     x1 - 0 (Full Turn compression valve), 1 (1/4 Turn Ceramic w/ Check Valve)     
     x2x3 - 00 (Standard  - Default)
            L1 (.45 GPM Power Pulse spray)
            L2 (.65 GPM Power Pulse spray)
            L3 (.74 GPM Power Pulse spray)
            L4 (1.05 GPM Power Pulse spray)
     -yyy or yyyyy - BR - w/ Wall Bracket
                     (Blank)  - w/o Wall Bracket
                     AF1  - Add-on Faucet w/6” Spout
                     AF2  - Add-on Faucet w/8” Spout
                     AF3  - Add-on Faucet w/10” Spout
                     AF4  - Add-on Faucet w/12” Spout
                     AF5  - Add-on Faucet w/14” Spout
                     AF6  - Add-on Faucet w/16” Spout
                     AF7  - Add-on Faucet w/18” Spout
                     MK  - Mounting Kit
                     01 to 99  - Customer Code
[33] Product Name: KL74-X0XX-XX, where: 
     KL74: Chrome Plated single hole deck mount base
     First X: Inlet: 9 – Single 1/2” cast inlets
     Second and third X: Spout: 
     00   - 3 1/2” Gooseneck
     01   - 8 ½” Gooseneck
     02   - 6” Gooseneck
     06   - 6” Tubular Swing Spout
     08   - 8” Tubular Swing spout
     10   - 10” Tubular Swing spout
     12   - 12” Tubular Swing spout
     14   - 14”  Tubular Swing spout
     16   - 16” Tubular Swing spout
     18   - 18” Double jointed swing spout
     18A - 18” Tubular Swing spout
     24    - 24” Double jointed swint spout
     Fourth X: Spout Style, where
     X - Adjustable Spout
     R - Rigid Tubular Spout
     Fifth X: Aerator, where
     A - 0.5 GPM PCA Spray vandal resistant
     B - 1.5 GPM max laminar vandal resistant
     C - 0.5 GPM PCA Spray
     D - 1.5 GPM max laminar
     E - 2.2 GPM Max Aerated stream
     F - 2.2 GPM max aerated stream vandal resistant
     H - 2.2 GPM Max aerated stream vandal and hose resistant
     J - 0.35 GPM PCA Spray
     L - 0.35 GPM PCA Spray vandal resistant
     M - 1.0 GPM PCA Laminar Flow
     S - 6.0 GPM MAX wide rose spray
     Optional - Z suffix denotes special packaging as an option
[50] KLnn-XXXX-YYY
     nn = Type
     58 – 4” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout
     X1 = Inlet
     4 – 4” Deck Mount Faucet
     8 – 8” Deck Mount Faucet
     9 – Single or Double Pantry Faucet
     X2 = Valve Type
     0 – Compression
     1 – Ceramic
     X3X4 = Spouts
     06 – 6” Spout
     08 – 8” Spout
     10 – 10” Spout
     12 – 12” Spout
     14 – 14” Spout
     16 – 16” Spout
     18 – 18” Spout
     20 – 20” Spout
     22 – 22” Spout
     24 – 24” Spout
     26 – 26” Spout
     28 – 28” Spout
     Y1 = S (Swivel Spout)
     Y2 = Aerator
     A – 0.5 GPM PCA Spray Vandal Resistant
     B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant
     C – 0.5 GPM PCA Spray
     D – 1.5 GPM Max Laminar Antimicrobial
     E – 2.2 GPM Max Aerated Stream
     F – 2.2 GPM Max Aerated Stream Vandal Resistant
     Y3 = Handle Type
     1 – Standard Encore Lever
     2 – Cross
     4 – 4” Wrist Blade
     5 – Standard Lever W/ Tamper Proof Screw
     6 – 6” Wrist Blade
     7 – 4” Wrist Blade W/ Tamper Proof Screw
     8 – 6” Wrist Blade W/ Tamper Proof Screw
NOTE: Products Listed under the category of Commerical Kitchen and Bar Endpoint Devices are
      tested and Certified based upon their sole application being the delivery of water for
      high volume restaurant use or large batch food preparation.

Facility : Zhejiang, China

Mechanical Plumbing Devices

Trade Designation
Commercial Faucets[1]
KC50-1XXX-YYYYY[2] [G] [Q]
KC53-1XXX-YYYYY[2] [G] [Q]
KC56-1XXX-YYYYY[2] [G] [Q]
KC60-1XXX-YYYYY[2] [G] [Q]
KC63-1XXX-YYYYY[2] [G] [Q]
KC66-1XXX-YYY[2] [G] [Q]
KC69-1XXX-YYYYY[2] [G] [Q]
KC71-1XXX-YYYYY[2] [G] [Q]
KC73-1XXX-YYYYY[2] [G] [Q]
KCP50-1XXX-YYYYY[3] [G]
KCP53-1XXX-YYYYY[3] [G]
KCP56-1XXX-YYYYY[3] [G]
KCP60-1XXX-YYYYY[3] [G]
KCP63-1XXX-YYYYY[3] [G]
KCP69-1XXX-YYYYY[3] [G]
KCP71-1XXX-YYYYY[3] [G]
KCP73-1XXX-YYYYY[3] [G]
KL33-9xxx-yyy[4] [G] [Q]
KL34-1xxxx-yyy Series[G] [Q] [44]
KL34-5660-PS[G] [Q]
KL34-8XXX-YYY Faucet Series[G] [Q] [46]
KL35-7XXX-YYY[Q] [47]
KL35-9XXX-YYY[Q] [47]
KL41-20xxVByy[5] [6] [G] [Q]
KL43-4050-PFDI[Q]
KL50-2000 DOUBLE PANTRY UTILITY SPRAY[G]
KL50-2000-VB DOUBLE PANTRY UTILITY SPRAY W/ VACUUM BREAKER[G]
KL50-3000 DOUBLE PANTRY POT FILLER[G]
KL50-3000-VB DOUBLE PANTRY POT FILLER W/ VACUUM BREAKER[G]
KL50-9-857739[G] [Q]
KL50-9-857740[G] [Q]
KL50-9-857741[G] [Q]
KL51-XXXX-YYY Series[G] [Q] [32]
KL52-9-857736[G] [Q]
KL52-9-857738[G] [Q]
KL53-2000 WALL MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS[G]
KL53-2000-VB WALL MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL53-3000 WALL MOUNT POT FILLER 8"[200mm] ADJ. CENTERS[G]
KL53-3000-PFDI-VB[Q]
KL53-3000-VB WALL MOUNT POT FILLER 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL54 Encore Series Wall Mount[G]
KL56-2000 DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS[G]
KL56-2000-VB DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL56-3000 DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS[G]
KL56-3000-VB DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL57-XXXX-YYY Series[G] [Q] [36]
KL60-2000 DECK MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS[G]
KL60-2000-VB DECK MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL60-3000 DECK MOUNT POT FILLER 8"[200mm] ADJ. CENTERS[G]
KL60-3000-VB DECK MOUNT POT FILLER 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]
KL61 Encore Series 8" Deck Mount[G]
KL61-XXXX-YYY Series[G] [Q] [37]
KL63-2000 SINGLE PANTRY UTILITY SPRAY[G]
KL63-2000-VB SINGLE PANTRY UTILITY SPRAY W/ VACUUM BREAKER[G]
KL63-3000 SINGLE PANTRY POT FILLER[G]
KL63-3000-VB SINGLE PANTRY POT FILLER W/ VACUUM BREAKER[G]
KL64 MV Encore Series Single Pantry w/ Mixing Valve[G]
KL64-XXXX-YYY Series[G] [Q] [38]
KL65-9-857735[G] [Q]
KL65-9-857737[G] [Q]
KL67-XXXX-YYY Series[G] [Q] [39]
KL69-2000 SINGLE WALL MOUNT UTILITY SPRAY[G]
KL69-2000-VB SINGLE WALL MOUNT UTILITY SPRAY W/ VACUUM BREAKER[G]
KL69-3000 SINGLE WALL MOUNT POT FILLER[G]
KL69-3000-VB SINGLE WALL MOUNT POT FILLER W/ VACUUM BREAKER[G]
KL70-XXXX-YYY Series[G] [Q] [40]
KL71-2000 WALL MOUNT BASE UTILITY SPRAY[G]
KL71-2000-VB WALL MOUNT BASE UTILITY SPRAY W/ VACUUM BREAKER[G]
KL71-3000 WALL MOUNT BASE POT FILLER[G]
KL71-3000-VB WALL MOUNT BASE POT FILLER W/ VACUUM BREAKER[G]
KL72-XXXX-YYY Series[G] [Q] [41]
KL73-2000 DECK MOUNT BASE UTILITY SPRAY[G]
KL73-2000-VB DECK MOUNT BASE UTILITY SPRAY W/ VACUUM BREAKER[G]
KL73-3000 DECK MOUNT BASE POT FILLER[G]
KL73-3000-VB DECK MOUNT BASE POT FILLER W/ VACUUM BREAKER[G]
KL76-XXXX-YYY Series[G] [Q] [43]
KLF34-1xxx-yyyy[G] [Q] [79]
KLF35-1xxx-yyyy[G] [Q] [80]
KLF50-1xxx-yyyy[G] [Q] [81]
KLF53-1xxx-yyyy[G] [Q] [82]
KLF56-1xxx-yyyy[G] [Q] [83]
KLF60-1xxx-yyyy[G] [Q] [84]
KLF63-1xxx-yyyy[G] [Q] [85]
KLF66-1xxx-yyyy[G] [Q] [86]
KLF69-1xxx-yyyy[G] [Q] [87]
KLF71-1xxx-yyyy[G] [Q] [88]
KLF73-1xxx-yyyy[G] [Q] [89]
KLP34-1XXX-YYY Series[Q] [45]
KLP34-5660-PFD[Q]
KLP34-5660-PFDI-AVD[Q]
KLP34-5660-PFDI-AVD1[Q]
KLP53-2300-PFDI-VB[Q]
KLP53-5545-PFDI-AVB[Q]
KLP53-5660-PFDI[Q]
KLP53-5660-PFDI-AVB[Q]
KLP53-5660-PFDIDJ[Q]
KPV-X001 Pot Filler[G]
TLL13-1xxx-yyyyy[G] [Q] [55]
TLL13-8xxx-yyy Series[G] [Q] [56]
TLL20-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [57]
TLL50-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [60]
TLL52-9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [62]
TLL55-7xxx-yyyy TOPLINE ADD-ON FAUCET W/ SPOUT ASSEMBLIES Series[Q] [63]
TLL57-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [64]
TLL58-4x1x2x3-y1y2y3 Top Lines Series[G] [Q] [66]
TLL61-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [67]
TLL62-8x1x2x3-y1y2y3 Top Lines Series[G] [Q] [69]
TLL65-9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [70]
TLL70-1x1x2x3-y1y2y3 Top Lines Series[G] [Q] [71]
TLP13-1XXX-YYYYY[G] [Q] [73]
TLP20-1XXX-YYYYY[G] [Q] [74]
TLP50-1XXX-YYYYY[G] [Q] [75]
TLP57-1XXX-YYYYY[G] [Q] [76]
TLP61-1XXX-YYYYY[G] [Q] [77]
TLP70-1XXX-YYYYY[G] [Q] [78]
[1] Z - Special packaging
Commercial Kitchen and Bar Endpoint Devices[1]
KL34-5500-PS[G] [Q]
KL34-5622-PS[G] [Q]
KL34-8014-PS[G] [Q]
KL34-8014-PSP[G]
KL50-1XXX-YYY[G] [Q] [10]
KL52-9XXX-YYY[G] [Q] [48]
KL53-1XXX-YYY[G] [Q] [10]
KL53-5500-PS[G] [Q]
KL53-5555-PS[G]
KL53-5614-PS[G]
KL53-5622-PS[G] [Q]
KL55-7XXX-YYY[G] [Q] [49]
KL56-1XXX-YYY[G] [Q] [10]
KL58-4XXX-YYY[G] [Q] [50]
KL60-1XXX-YYY[G] [Q] [10]
KL62-8XXX-YYY[G] [Q] [51]
KL63-1XXX-YYY[G] [Q] [10]
KL65-9XXX-YYY[G] [Q] [52]
KL65-9XXX-YYYMV[G] [Q] [52]
KL66-1XXX-YYY[G] [Q] [10]
KL69-1XXX-YYY[G] [Q] [10]
KL71-1XXX-YYY[G] [Q] [10]
KL73-1XXX-YYY[G] [Q] [10]
KLP50-1XXX-YYYYY[Q] [13]
KLP53-1XXX-YYYYY[Q] [13]
KLP56-1XXX-YYYYY[Q] [13]
KLP60-1XXX-YYYYY[Q] [13]
KLP63-1XXX-YYYYY[Q] [13]
KLP66-1XXX-YYY[G] [Q] [13]
KLP69-1XXX-YYYYY[Q] [13]
KLP71-1XXX-YYYYY[Q] [13]
KLP73-1XXX-YYYYY[Q] [13]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [10] KL-xxxx-yyyyy where: x1 - 1 (Pre-Rinse) x2 - 0 (compression valves) x3x4 = spout lengths up to 28" y1y2y3 or y1y2y3y4y5 - Can include ANY combination(s) of the following: y1 - S (Swivel Spout) y2 - 0 (no aerator) y3 - 1 (Lever Handle) 2 (Cross Handle) 4 (4" Wrist Handle) 5 (Lever Handle W/ Tamper Proof Screw) 6 (6" Wrist Handle) 7 (4" Wrist Handle W/ Tamper Proof Screw) 8 (6" Wrist Handle W/ Tamper Proof Screw) (Blank) - Default BR - Wall Bracket BS - Wall Bracket w/ S/S Spring B60 - Wall Bracket W/ 60"" Hose B60Z - Wall Bracket W/ 60"" Hose & Special Packaging FG - Customer Code AF1 – Add-on Faucet w/6” Spout AF2 – Add-on Faucet w/8” Spout AF3 – Add-on Faucet w/10” Spout AF4 – Add-on Faucet w/12” Spout AF5 – Add-on Faucet w/14” Spout AF6 – Add-on Faucet w/16” Spout AF7 – Add-on Faucet w/18” Spout MK - Mounting Kit (KL40-3400 or KL40-3410) 01 to 99 number strings - Customer Codes AA thru YY character strings - Customer Codes Z - Suffix denotes special packaging as an option [13] Pre-Rinse Assemblies using Power Pulse Spray Assembly will follow the format KLPnn-1xxx-yyyyy where: nn - 50, 53, 56, 60, 63, 66, 69, 71, 73 x1 - 1 (Pre-Rinse) x2 - 0 (compression valve) 1 (ceramic valve) x3x4 - L1 (.45 GPM Power pulse spray) L2 (.65 GPM Power pulse spray) L3 (.74 GPM Power pulse spray) L4 (1.05 GPM Power pulse spray) yyyyy - AF1 – Add-on faucet w/6" spout AF2 – Add-on faucet w/8" spout AF3 – Add-on faucet w/10" spout AF4 – Add-on faucet w/12" spout AF5 – Add-on faucet w/14" spout AF6 – Add-on faucet w/16" spout AF7 – Add-on faucet w/18" spout (Blank) – w/o wall bracket BR – w/ wall bracket MK – Mounting kit [48] KLnn-XXXX-YYY nn = Type 52 – Double Pantry Faucet W/ Elevated Swing Spout 58 – 4” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout 62 – 8” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout 65 – Single Pantry Faucet W/ Elevated Swing Spout 65 – Single Pantry Faucet W/ Elevated Swing Spout & Mixing Valve X1 = Inlet 4 – 4” Deck Mount Faucet 8 – 8” Deck Mount Faucet 9 – Single or Double Pantry Faucet X2 = Valve Type 0 – Compression 1 – Ceramic X3X4 = Spouts 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 26 – 26” Spout 28 – 28” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw [49] KLnn-xxxx-yyy: X1 = 7 (Add-on Faucet) X2 = 0 (Compression Valve) X3x4 = Spouts 00 – Standard 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw [50] KLnn-XXXX-YYY nn = Type 58 – 4” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout X1 = Inlet 4 – 4” Deck Mount Faucet 8 – 8” Deck Mount Faucet 9 – Single or Double Pantry Faucet X2 = Valve Type 0 – Compression 1 – Ceramic X3X4 = Spouts 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 26 – 26” Spout 28 – 28” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw [51] KLnn-XXXX-YYY nn = Type 62 – 8” Adjustable Center Deck Mount Faucet W/ Elevated Swing Spout X1 = Inlet 4 – 4” Deck Mount Faucet 8 – 8” Deck Mount Faucet 9 – Single or Double Pantry Faucet X2 = Valve Type 0 – Compression 1 – Ceramic X3X4 = Spouts 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 26 – 26” Spout 28 – 28” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw [52] KLnn-XXXX-YYY nn = Type 65 – Single Pantry Faucet W/ Elevated Swing Spout X1 = Inlet 4 – 4” Deck Mount Faucet 8 – 8” Deck Mount Faucet 9 – Single or Double Pantry Faucet X2 = Valve Type 0 – Compression 1 – Ceramic X3X4 = Spouts 06 – 6” Spout 08 – 8” Spout 10 – 10” Spout 12 – 12” Spout 14 – 14” Spout 16 – 16” Spout 18 – 18” Spout 20 – 20” Spout 22 – 22” Spout 24 – 24” Spout 26 – 26” Spout 28 – 28” Spout Y1 = S (Swivel Spout) Y2 = Aerator A – 0.5 GPM PCA Spray Vandal Resistant B – 1.5 GPM Max Laminar Antimicrobial and Vandal Resistant C – 0.5 GPM PCA Spray D – 1.5 GPM Max Laminar Antimicrobial E – 2.2 GPM Max Aerated Stream F – 2.2 GPM Max Aerated Stream Vandal Resistant Y3 = Handle Type 1 – Standard Encore Lever 2 – Cross 4 – 4” Wrist Blade 5 – Standard Lever W/ Tamper Proof Screw 6 – 6” Wrist Blade 7 – 4” Wrist Blade W/ Tamper Proof Screw 8 – 6” Wrist Blade W/ Tamper Proof Screw
[1] Z - Special packaging
Faucet Aerator[1] [14] [15]
KN50-X201-H Vandal Proof Aerator Kit[G]
KN50-X203-B 1.0gpm Laminar VR[G]
KN50-X203-C 1.0 gpm AERATED STREAM VR[G]
KN50-X203D 1.5 GPM AERATED STREAM VR[G]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
[1] Z - Special packaging [14] Optional exterior coating SANI-GUARD™. [15] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Faucet Body[1]
KL-19-Y003 Deck Mount Body with Sensor Assembly[G]
KL19-Y004 Wall Mount Body with Sensor Assembly[G]
KL21-Y002 Deck Mount Body with Sensor Assembly[G]
KL41-Y002[G] [Q]
KL41-Y002-U-MK1[16]
KL41-Y003[G] [Q]
KL41-Y003-U-MK1[16]
KL43-4050[G]
KL45-Y002[G] [Q]
KL45-Y002-GT[G] [Q]
KL45-Y002-P[G] [Q]
KL45-Y003[G] [Q]
KL50-Y101 Series Encore Double Pantry Base[G] [Q]
KL51-Y101 Series Encore Double Pantry Base[G]
TLL13-Y001[G] [15]
TLL13-Y001-C Top-Line 8'' Wall Mount Faucet Assembly[Q]
TLL13-Y001-CCV Top-Line 8'' Wall Mount Faucet Assembly[Q]
TLL15-Y001[G]
TLL15-Y001-C 4” Wall Mount Faucet Body[Q]
TLL15-Y001-CCV 4” Wall Mount Faucet Body[Q]
TLL20-X001[G] [Q] [15]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [15] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [16] Knnn - X1X2X3X4-Y1Y2Y3: nnn - Faucet series L41 - Encore deck mount faucet L45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Standard Encore® Compression Valve 1 - 1/4 Turn Encore® Ceramic Valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser "-" – Universal Type Faucet Body (When Required): U - 1/2" NPSM inlets with Straight Fittings (for KL41 Series) U - 1/2" NPSM inlets with 90° Swivel Spout Base & Elbow Fittings (for KL45 Series) Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
[1] Z - Special packaging
Faucet Spouts[1] [14] [15]
KL11-X801 8" Swivel Arched Cast Spout Assembly[G] [Q]
KL11-X803 8" High Arc Tubular Spout Assembly[G] [Q]
KL11-Y250-G Swing Nozzle Vacuum Breaker w/ 6" Spout[G] [Q]
KL11-Y251-G Swing Nozzle Vacuum Breaker w/ 8" Spout[G] [Q]
KL11-Y252-G Swing Nozzle Vacuum Breaker w/ 12" Spout[G] [Q]
KL11-Y253-G 9" Swivel - Vacuum Breaker w/ 6" Spout[G] [Q]
KL11-Y253-K 9" Rigid Vacuum Breaker w/ 6" Spout[G] [Q]
KL11-Y254-G 9" Swivel - Vacuum Breaker w/ 8" Spout[G] [Q]
KL11-Y254-K 9" Rigid Vacuum Breaker w/ 8" Spout[G] [Q]
KL11-Y255-G 9" Swivel - Vacuum Breaker w/ 12" Spout[G] [Q]
KL11-Y255-K 9" Rigid Vacuum Breaker w/ 12" Spout[G] [Q]
KL11-Y309 9" Swivel Arched Tubular Spout Assembly[G] [Q]
KL11-Y406 6" Horizontal Cast Spout Assembly[G] [Q]
KL11-Y408 8" Horizontal Cast Spout Assembly[G] [Q]
KL11-Y413 13" Cast Double Jointed Swing Spout Assembly[G] [Q]
KL11-Y415 15" Cast Double Jointed Swing Spout Assembly[G] [Q]
KL11-Y418 18" Cast Double Jointed Swing Spout Assembly[G] [Q]
KL11-Y420 20" Cast Double Jointed Swing Spout Assembly[G] [Q]
KL34-1014-FG Pre-Rinse Assembly[G]
KL34-Y010 10" Straight Spout[G] [Q]
KL34-Y012 12" Straight Spout[G] [Q]
KL34-Y014 14" Straight Spout[G] [Q]
KL34-Y018 18" Straight Spout[G] [Q]
KL34-Y020 20" Double Jointed Spout[G] [Q]
KL34-Y022 22" Double Jointed Spout[G] [Q]
KL34-Y024 24" Double Jointed Spout[G] [Q]
KL34-Y028 28" Double Jointed Spout[G] [Q]
KL34-Y110 10" Spout Extension[G] [Q]
KLP34-1014-FG Pre-Rinse Assembly[G]
KLP34-1014-FG1 Pre-Rinse Assembly[G]
KLP34-1014-FG2 Pre-Rinse Assembly[G]
KS11-06-X000 3 1/2" Swivel Gooseneck Spout[G] [Q] [17]
KS11-06-X001 8 1/2" Swivel Gooseneck Spout[G] [Q] [17]
KS11-06-X002 6" Swivel Gooseneck Spout[G] [Q] [17]
KS11-06-X006 6" Swivel Spout[G] [Q] [17]
KS11-06-X008 8" Swivel Spout[G] [Q] [17]
KS11-06-X010 10" Swivel Spout[G] [Q] [17]
KS11-06-X012 12" Swivel Spout[G] [Q] [17]
KS11-06-X014 14" Swivel Spout[G] [Q] [17]
KS11-06-X016 16" Swivel Spout[G] [Q] [17]
KS11-06-X018 18" Double Jointed Spout[G] [Q] [17]
KS11-06-X020 20" Double Jointed Spout[G] [Q] [17]
KS11-06-X022 22" Double Jointed Spout[G] [Q] [17]
KS11-06-X024 24" Double Jointed Spout[G] [Q] [17]
KS11-06-X026 26" Double Jointed Spout[G] [Q] [17]
KS11-06-X028 28" Double Jointed Spout[G] [Q] [17]
KS11-06-X100 3 1/2" Rigid Gooseneck Spout[G] [Q] [17]
KS11-06-X101 8 1/2" Rigid Gooseneck Spout[G] [Q] [17]
KS11-06-X102 6" Rigid Gooseneck Spout[G] [Q] [17]
KS11-06-X112 12" Spout Extension[G] [Q] [17]
KS11-12-X000 3 1/2" Swivel Gooseneck Spout[G] [Q] [17]
KS11-12-X001 8 1/2" Swivel Gooseneck Spout[G] [Q] [17]
KS11-12-X002 6" Swivel Gooseneck Spout[G] [Q] [17]
KS11-12-X006 6" Swivel Spout[G] [Q] [17]
KS11-12-X008 8" Swivel Spout[G] [Q] [17]
KS11-12-X010 10" Swivel Spout[G] [Q] [17]
KS11-12-X012 12" Swivel Spout[G] [Q] [17]
KS11-12-X014 14" Swivel Spout[G] [Q] [17]
KS11-12-X016 16" Swivel Spout[G] [Q] [17]
KS11-12-X018 18" Double Jointed Spout[G] [Q] [17]
KS11-12-X020 20" Double Jointed Spout[G] [Q] [17]
KS11-12-X022 22" Double Jointed Spout[G] [Q] [17]
KS11-12-X024 24" Double Jointed Spout[G] [Q] [17]
KS11-12-X026 26" Double Jointed Spout[G] [Q] [17]
KS11-12-X028 28" Double Jointed Spout[G] [Q] [17]
KS11-12-X100 3 1/2" Rigid Gooseneck Spout[G] [Q] [17]
KS11-12-X101 8 1/2" Rigid Gooseneck Spout[G] [Q] [17]
KS11-12-X102 6" Rigid Gooseneck Spout[G] [Q] [17]
KS11-12-X103 6" Rigid Gooseneck Spout Assembly[G] [Q]
KS11-12-X106 6" Spout Extension[G] [Q] [17]
KS11-12-X112 12" Spout Extension[G] [Q] [17]
KS11-12-X12DJ Double Jointed Spout[G] [Q] [17]
KS11-12-X18A 18" Long Swivel Spout[G] [Q] [17]
KS11-12X00212 Speciial 6" Gooseneck Spout Assembly[G] [Q] [17]
KS11-12X00213 Speciial 6" Angled Gooseneck Spout Assembly[G] [Q] [17]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [17] 06 - 0.6 mm Spout Tube Thickness 12 - 1.2 mm Spout Tube Thickness
[1] Z - Special packaging [14] Optional exterior coating SANI-GUARD™. [15] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Faucet Valve Body[1]
KN43-4050 Encore Mixing Valve w/ 4" Centers
[1] Z - Special packaging
Faucets[1]
KEXX-XXXX-YYZ ELECTRONIC WIDE SPREAD FAUCETS+ ¢ § [Q] [18]
KHL81-4XXX-CYY[G] [19]
KHL81-9XXX-CYY[G] [19]
KL18-3170 Single Spout Swing Faucet[G] [Q] [14] [20]
KL22-3100[G] [Q] [14] [20]
KL22-3100-SB[G] [Q] [14] [20]
KL41-NXXX-YYY Series[G] [Q] [16]
KL45-5000[G] [Q]
KL45-NXXX-YYY Series[G] [Q] [16]
KL454xxxyyyGT[G] [16]
KL454xxxyyyP[G] [16]
KL50-Y001 Double Pantry Faucet Assembly[G] [Q]
KL53-Y001 Wall Mount Faucet Assembly[G]
KL54-Y001 Wall Mount Faucet Assembly[G]
KL81-4005-CE1[Q]
KL81-4005-SB[G] [19]
KL81-4005-SB[Q]
KL81-4XXX-CYY[G] [19]
KL81-9005-CE1[Q]
KL81-9XXX-CYY[G] [19]
KL83-NXXX-YYY[G] [21]
KL84-NXXX-YYY[G] [22]
KL85-NXXX-YYY[G] [21]
KL86-NXXX-YYY[G] [22]
KL87-8205-CE Angled Metering Valve w/ Metering Handle (Cold Valve)[G]
KL87-8205-HE Angled Metering Valve w/ Metering Handle (Hot Valve)[G]
KL87-8205-UE Angled Metering Valve w/ Metering Handle (Universal)[G]
KL87-8245-CE Angled Metering Valve w/ 8" Deck Plate and Metering Handle (CV)[G]
KL87-8245-HE Angled Metering Valve w/ 8" Deck Plate and Metering Handle (HV)[G]
KL87-9005-CE1 Single Post Basin Tap w/ Lever Handle (Compression Cold Valve)[G]
KL87-9005-CE2 Single Post Basin Tap w/ Cross Handle (Compression Cold Valve)[G]
KL87-9005-CE4 Single Post Basin Tap w/ 4" Wrist Blade Handle (CCV)[G]
KL87-9005-HE1 Single Post Basin Tap w/ Lever Handle (Compression Hot Valve)[G]
KL87-9005-HE2 Single Post Basin Tap w/ Cross Handle (Compression Hot Valve)[G]
KL87-9005-HE4 Single Post Basin Tap w/ 4" Wrist Blade Handle (CHV)[G]
KL87-9105-CE1[G]
KL87-9105-CE2[G]
KL87-9105-CE4[G]
KL87-9105-HE1[G]
KL87-9105-HE2[G]
KL87-9105-HE4[G]
KL87-9205-CE Single Post Basin Tap w/ Metering Handle (Metering Cold Valve)[G]
KL87-9205-HE Single Post Basin Tap w/ Metering Handle (Metering Hot Valve)[G]
KL87-9205-UE Single Post Basin Tap w/ Metering Handle (Universal Metering Valve)[G]
KN41-4XXX-YYYY Encore Deck Mount Faucet 4" Center w/ Spout[23]
KN41-8XXX-YYYY Encore Deck Mount Faucet 8" Center w/ Spout[23]
KN45-4XXX-YYYY Encore Wall Mount Faucet 4" Center w/ Spout[23]
KN45-8XXX-YYYY Encore Wall Mount Faucet 8" Center w/ Spout[23]
KPL81-4XXX-CYY[G] [19]
KPL81-9XXX-CYY[G] [19]
KPL85-NXXX-YYY[G] [21]
KPL86-NXXX-YYY[G] [22]
KPL86-NXXX-YYY[G] [24]
KPV-X001 Pot Filler[14] [20]
TLL11-4XXX-YYY 4" Deck Mount Faucet[G] [Q] [53]
TLL11-8XXX-YYY 8" Deck Mount Faucet[G] [Q] [54]
TLL13-8XXX-YYY 8" Wall Mount Faucet[G] [25]
TLL15-4106-SE1Z[G] [Q]
TLL15-4XXX-YYY 4" Wall Mt/Backsplash Hand Sink Faucet[G] [Q] [26]
TLL20 9x1x2x3-y1y2y3 Top Lines Series[8] [G] [Q] [59]
TLL20-8XXX-YYY Series[G] [Q] [58]
TLL50-9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [61]
TLL57-4x1x2x3-y1y2y3 Top Lines Series[G] [Q] [65]
TLL61-8x1x2x3-y1y2y3 Top Lines Series[G] [Q] [68]
TLL70-9x1x2x3-y1y2y3 Top Lines Series[G] [Q] [72]
[1] Z - Special packaging
Flexible Plumbing Connectors[1] [G]
KL50-Y004-20 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-20U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-26 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-26U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-44 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-44U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-60 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-60U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-72 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-72U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y004-96 Pre-Rinse Hose Assembly w/ Grip[Q]
KL50-Y004-96U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters[Q]
KL50-Y010-20 20" Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-26 26" Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-32 32'' Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-44 44" Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-60 60" Pre-Rinse Hose (No Grip)[Q]
KL50-Y010-96 96" Pre-Rinse Hose (No Grip)[Q]
KL81-Y020 20" Supply Hose[Q]
Kl50-Y010-72 72" Pre-Rinse Hose (No Grip)[Q]
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
[1] Z - Special packaging [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
Glass Fillers[1] [G] [Q] [14]
KL26-5000
KL26-5000-SP2
KL26-5001
KL26-5012
KL26-5012-SP
KL26-5014
KL26-5015-SP
[1] Z - Special packaging [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [14] Optional exterior coating SANI-GUARD™.
Miscellaneous Faucet Components[1]
KL09-X001 Sink Outlet[G]
KL11-0010 Repair Kit[G] [15]
KL11-Y204 Adapter, Serrated Spout Outlet[G] [Q]
KL11-Y208 Serrated Spout Outlet Assembly[G] [Q]
KL11-Y507 7" Cast Extension Arm Assembly[G] [Q]
KL11-Y512 12" Cast Extension Arm Assembly[G] [Q]
KL13-0010 Repair Kit[Q]
KL18-0010 Repair Kit[G] [Q] [14]
KL19-X001 WALL MOUNT BODY WITH SENSOR ASSEMBLY[G]
KL19-X002 SOLENOID[G]
KL19-X004 DECK MOUNT BODY WITH SENSOR ASSEMBLY[G]
KL19-X025 THERMOSTATIC MIXING VALVE[G]
KL19-X026 Thermostatic Mixing Valve[G]
KL21-Y001 DECK MOUNT BODY WITH SENSOR ASSEMBLY[G]
KL22-0010[G] [Q] [14]
KL24-1100 Short Pedal Valve Assembly[1] [G] [Q] [15]
KL24-1200 Pedal Valve Assembly, Shelf Mount[1] [G] [Q] [15]
KL24-1302 Extended Pedal Valve Wall Mount w/ Stops[1] [G] [Q] [15] [34]
KL25-1000 Dual Pedal Foot Control Valve Assembly[G] [Q]
KL25-2000 Single Pedal Foot Control Valve Assembly[G] [Q]
KL25-3000 Dual Pedal Knee Control Valve Assembly[G] [Q]
KL25-4000 Single Pedal Knee Control Valve Assembly[G] [Q]
KL26-0010 Glass Filler Repair Kit[G] [Q] [14]
KL35-7010 10" Quik-Fil 3/4" Add-on Faucet w/ 10" Spout[G]
KL35-7012 12" Quik-Fil 3/4" Add-on Faucet w/ 12" Spout[G]
KL35-7014 14" Quik-Fil 3/4" Add-on Faucet w/ 14" Spout[G]
KL35-7018 18" Quik-Fil 3/4" Add-on Faucet w/ 18" Spout[G]
KL35-7020 20" Quik-Fil 3/4" Add-on Faucet w/ 20" Spout[G]
KL35-7022 22" Quik-Fil 3/4" Add-on Faucet w/ 22" Spout[G]
KL35-7024 24" Quik-Fil 3/4" Add-on Faucet w/ 24" Spout[G]
KL35-7028 28" Quik-Fil 3/4" Add-on Faucet w/ 28" Spout[G]
KL35-Y001 Quik-Fil 3/4" Add-on Faucet[G]
KL35-Y001 Quik-Fil 3/4" Add-on Faucet Assembly[Q]
KL35-Y004 3/4" Quik-Fil Single Wall Mount Faucet Body Assembly[Q]
KL35-Y007 3/4" Add on Valve Assembly [Q]
KL35-Y226-2 Rigid Riser Assembly[Q]
KL40-0153
KL40-1000 Wall Faucet Mounting Kit[G] [14]
KL40-3400 3/4" IPS Mounting Kit[G] [Q]
KL40-3410 3/4" IPS Mounting Kit[G] [Q]
KL50-0200 Pre-Rinse Spray Valve Repair Kit[G] [15]
KL50-0220-FS Encore Fan Spray[G] [Q]
KL50-0220-FS-CEV ENCORE FAN SPRAY[G]
KL50-0220-FS-SS Encore Fans Spray (S/S Nozzle)[G] [Q]
KL50-X032 Spring Retainer[G] [Q] [15]
KL50-X075 Rigid to Swing Adapter[G] [15]
KL50-X077 18" Riser Assembly[G] [15]
KL50-X122 Swivel to Rigid Adapter Assembly[Q]
KL50-X127 1/4" NPT Hose Adapter[G] [Q] [15]
KL50-X128 3/8" NPT Hose Adapter[G] [Q] [15]
KL50-X129 1/2" NPT Hose Adapter[G] [Q] [15]
KL50-Y001 Double Pantry Faucet Body Assembly [Q]
KL50-Y001-CCV[G] [Q]
KL50-Y001-CCV Double Pantry Faucet Body Assembly[Q]
KL50-Y002 Pre-Rinse Spray Head Assembly[G] [Q] [15]
KL50-Y002-065 Pre-Rinse Spray Head Assembly[G] [Q] [15]
KL50-Y002-12 Pre-Rinse Spray Head Assembly[G] [Q] [15]
KL50-Y002-16 Pre-Rinse Spray Head Assembly[G] [Q] [15]
KL50-Y002-FS-CEV PRE-RINSE FAN SPRAY VALVE ASSEMBLY[G]
KL50-Y016-44 Pre Rinse Hose with Grip and Continuous Pressure Vacuum Breaker[Q]
KL50-Y027 Button Valve Assembly[G] [Q] [15]
KL50-Y030 Pre-Rinse Angled Spray Head Assembly[G] [Q] [15]
KL50-Y031 Pot Filler Spray Head Assembly[G] [Q] [15]
KL50-Y226-18 18" Pop & Lock Riser Assembly[G]
KL50-Y226-2 2" Pop & Lock Riser For Add-On Faucet[G]
KL50-Y226-24 24" Pop & Lock Riser Assembly[G]
KL50-Y226-26 26" Pop & Lock Riser Assembly[G]
KL50-Y226-32 32" Pop & Lock Riser Assembly[G]
KL53-Y001 Wall Mount Faucet Body Assembly [Q]
KL53-Y001 Wall Mount Faucet Assembly[G] [15]
KL53-Y001-CCV[Q]
KL53-Y001-CCV 8"OC Wall Mount Faucet Body[Q]
KL54-Y001 Wal Mount Faucet Body Assembly[Q]
KL54-Y001 Wall Mount Faucet Assembly[G] [15]
KL54-Y001-CCV Wall Mount faucet Body Assembly[Q]
KL55-Y001 Add-On Faucet Assembly[G] [15]
KL56-Y001 4in Deck Mount Faucet Body Assembly [Q]
KL56-Y001-CCV 4" Deck Mount Faucet Body Assembly[Q]
KL57-Y003 Encore 4" Base Faucet Body Assembly[G] [15]
KL60-Y001 8" Deck Mount Faucet Body Assembly [Q]
KL60-Y001-CCV 8" Deck Mount Faucet Body Assembly [Q]
KL60-Y010 Deck Mounting Kit[G] [15]
KL61-Y001 Encore Single Valve Deck Mount Faucet Body Assembly[G] [15]
KL63-Y001 Single Pantry Deck Mount Faucet Body Assembly[Q]
KL63-Y001-CCV Single Pantry Deck Mount Faucet Body Assembly[Q]
KL64-Y001 Encore 8" Deck Faucet Body Assembly[G] [15]
KL66-Y001 6'' Deck Mount Faucet Body Assembly[Q]
KL66-Y001-CCV 6'' Deck Mount Faucet Body Assembly[Q]
KL72 Encore Series Wall Mount Faucets[Q] [32]
KL74 Encore Series Deck Mount Faucets[Q] [33]
KL90-X015-M MANUAL MIXING VALVE[G]
KL90-X017-M "Y" SUPPLY INLET[G]
KL91-0100 Mechanical Hand-Wash Faucet[G] [Q] [14] [15]
KL91-Y003 Adapter Kit[G] [Q] [14] [15]
KLF-0300-A Variable Flow Spray Head Repair Kit[G] [27]
KLF-0300-B Variable Flow Spray Head Repair Kit[G] [27]
KLF-0410-x Variable Flow Pre-Rinse Spray Kit[G] [Q] [28]
KLF-Y104-x Variable Flow Pre-Rinse Spray Assembly[G] [Q] [29]
KLP50-0200xxx Spray Head Repair Kit[G] [30]
KLP50-0220-65-CEV RETRO-FIT SPRAY VALVE AND GRIP[G]
KLP50-0220105-CEV RETRO-FIT SPRAY VALVE AND GRIP[G]
KLP50-0220xxx RETRO-FIT SPRAY VALVE[G] [30]
KLP50-0300xxx Spray Head Repair Kit[G] [30]
KLP50-Y002-65-CEV PRE-RINSE SPRAY VALVE ASSEMBLY[G]
KLP50-Y002105-CEV PRE-RINSE SPRAY VALVE ASSEMBLY[G]
KLP50-Y002xxx Pre-Rinse Spray head[G] [Q] [30]
KN50-X025[Q]
KVB-6045-S-SD 45° Mount Severe Duty Vacuum Breaker Assembly[Q]
TLL-0010 Repair Kit[3] [Q]
TLL13-Y003-12 Pre-rinse Spray Valve Assembly[Q]
TLL13-Y003-16 Pre-rinse Spray Valve Assembly[Q]
TLL15-0010 Repair Kit[3] [G] [Q]
TLL50-X122 Swing to Rigid Adapter[G] [15]
[1] Z - Special packaging [3] Pre-Rinse Assemblies using Commercial Pre-rinse Hoses with Power Pulse spray assemblies will follow the format KCPnn-1xxx-yyyyy where: nn - 50, 53, 56, 60, 63, 69, 71, 73 1 - 1 (Pre-Rinse) x2 - 0 (compression valve) 1 (ceramic valve) x3x4 - 00 (Standard - Default) L1 (.45 GPM Power Pulse spray) L2 (.65 GPM Power Pulse spray) L3 (.74 GPM Power Pulse spray) L4 (1.05 GPM Power Pulse spray) yyyyy - BR - w/ Wall Bracket (Blank) - w/o Wall Bracket AF1 - Add-on Faucet w/6” Spout AF2 - Add-on Faucet w/8” Spout AF3 - Add-on Faucet w/10” Spout AF4 - Add-on Faucet w/12” Spout AF5 - Add-on Faucet w/14” Spout AF6 - Add-on Faucet w/16” Spout AF7 - Add-on Faucet w/18” Spout MK - Mounting Kit 20 - 20" HOSE LENGTH 26 - 26" HOSE LENGTH 60 - 60" HOSE LENGTH 72 - 72" HOSE LENGTH 96 - 96" HOSE LENGTH 01 To 99 - Customer Code [G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61. [14] Optional exterior coating SANI-GUARD™. [15] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [27] x - Spray tip A - S/S spray tip (.61/.7/1.2) C - Brass spray tip (.61/.7/1.2) D - Brass spray tip (.61/.7/1.5) Note: Spray Head Repair Kit comes with bezel, spray tips, center screw, O-ring, plunger, spring, washer, and button valve. [28] x - Spray tip A - S/S spray tip (.61/.7/1.2) C - Brass spray tip (.61/.7/1.2) D - Brass spray tip (.61/.7/1.5) Note: Pre-Rinse Spray Kit comes complete with grip and adapters to fit other manufacturer's hoses. [29] x - Spray tip A - S/S spray tip (.61/.7/1.2) B - S/S spray tip (.61/.7/1.5) C - Brass spray tip (.61/.7/1.2) D - Brass spray tip (.61/.7/1.5) *Note: Pre-Rinse Spray Assembly comes with spray tips less grip and adapters. [30] xxx - -12, -25, -45, -65, -74, 105 and 152 [32] [32] BODY KXXX: KL51 = CP POLISHED LOW LEAD BRASS DOUBLE PANTRY FAUCET BODY KL54 = CP POLISHED LOW LEAD BRASS SPLASH MOUNT FAUCET BODY WITH ADJUSTABLE SPOUT OUTLET KL57 = CP POLISHED LOW LEAD BRASS ELEVATED BRIDGE DECK MOUNT BODY WITH ADJUSTABLE SPOUT OUTLET KL61 = CP POLISHED LOW LEAD BRASS ELEVATED BRIDGE DECK MOUNT BODY WITH ADJUSTABLE SPOUT OUTLET KL64 = CP POLISHED LOW LEAD BRASS SINGLE PANTRY FAUCET BODY KL67 = CP POLISHED LOW LEAD BRASS ELEVATED BRIDGE DECK MOUNT BODY WITH ADJUSTABLE SPOUT OUTLET KL70 = CP POLISHED LOW LEAD BRASS SINGLE PANTRY BODY KL72 = CP POLISHED LOW LEAD BRASS SINGLE HOLE BASE KL74 = CP POLISHED LOW LEAD BRASS SINGLE HOLE BASE KL76 = CP POLISHED LOW LEAD BRASS WOK RANGE SPLASH MOUNT FAUCET 1st X INLET: 4 = 4” (102mm) CTR – ½”NPSM INTEGRAL CAST INLETS 6 = 6” (152mm) CTR – ½”NPSM INTEGRAL CAST INLETS 7 = 1/2” (13mm) OFFSET SUPPLY INLETS – KL60-Y004 8 = 8” (203mm) CTR – ½”NPSM INTEGRAL CAST INLETS, STANDARD SUPPLY INLETS, – KL60-Y006 9 = SINGLE ½”NPSM INTEGRAL CAST INLETS 2nd X VALVE: 0 = 1/4 TURN STANDARD ENCORE® COMPRESSION VALVE W/BUILT IN CHECK 1 = 1/4 TURN CERAMIC VALVE W/ INLINE CHECK VALVE 2 = SELF CLOSING ADJUSTABLE METERING VALVE 3rd and 4th X SPOUT: 00 = 3-1/2” (89mm) GOOSENECK 01 = 8-1/2” (216mm) GOOSENECK 02 = 6” (152mm) GOOSENECK 06 = 6” (152mm) TUBULAR OR CAST SWING SPOUT 08 = 8” (203mm) TUBULAR SWING SPOUT 10 = 10” (254mm) TUBULAR SWING SPOUT 12 = 12” (305mm) TUBULAR SWING SPOUT 14 = 14” (356mm) TUBULAR SWING SPOUT 16 = 16” (406mm) TUBULAR SWING SPOUT 18A = 18” (457mm) TUBULAR SWING SPOUT 18 = 18” (457mm) DOUBLE JOINTED SWING SPOUT 24 = 24” (609mm) DOUBLE JOINTED SWING SPOUT 1st Y SPOUT STYLE: S = ADJUSTABLE SPOUT R = RIGID TUBULAR SPOUT T = CAST TUBULAR SPOUT (6” OR 8” ONLY) 2nd Y AERATOR: A = 0.5 GPM PCA SPRAY VANDAL RESISTANT B = 1.5 GPM MAX LAMINAR VANDAL RESISTANT C = 0.5 GPM PCA SPRAY D = 1.5 GPM MAX LAMINAR E = 2.2 GPM MAX AERATED STREAM F = 2.2 GPM MAX AERATED STREAM VANDAL RESISTANT G = .35 GPM PCA SPRAY (MALE) H = 2.2 GPM MAX AERATED STREAM VANDAL & HOSE RESISTANT J = .35 GPM PCA SPRAY K = .35 GPM PCA SPRAY (MALE) VANDAL RESISTANT L = .35 GPM PCA SPRAY VANDAL RESISTANT M = 1.0 GPM PCA LAMINAR FLOW S = 6.0 GPM MAX WIDE ROSE SPRAY 3rd Y HANDLE: 1 = STANDARD ENCORE® LEVER 2 = CROSS 4 = 4” (102mm) WRIST BLADE 5 = STANDARD LEVER W/TAMPER PROOF SCREW 6 = 6” (152mm) WRIST BLADE 7 = 4” (102mm) WRIST BLADE W/ TAMPER PROOF SCREW 8 = 6” (152mm) WRIST BLADE W/TAMPER PROOF SCREW [33] Product Name: KL74-X0XX-XX, where: KL74: Chrome Plated single hole deck mount base First X: Inlet: 9 – Single 1/2” cast inlets Second and third X: Spout: 00 - 3 1/2” Gooseneck 01 - 8 ½” Gooseneck 02 - 6” Gooseneck 06 - 6” Tubular Swing Spout 08 - 8” Tubular Swing spout 10 - 10” Tubular Swing spout 12 - 12” Tubular Swing spout 14 - 14” Tubular Swing spout 16 - 16” Tubular Swing spout 18 - 18” Double jointed swing spout 18A - 18” Tubular Swing spout 24 - 24” Double jointed swint spout Fourth X: Spout Style, where X - Adjustable Spout R - Rigid Tubular Spout Fifth X: Aerator, where A - 0.5 GPM PCA Spray vandal resistant B - 1.5 GPM max laminar vandal resistant C - 0.5 GPM PCA Spray D - 1.5 GPM max laminar E - 2.2 GPM Max Aerated stream F - 2.2 GPM max aerated stream vandal resistant H - 2.2 GPM Max aerated stream vandal and hose resistant J - 0.35 GPM PCA Spray L - 0.35 GPM PCA Spray vandal resistant M - 1.0 GPM PCA Laminar Flow S - 6.0 GPM MAX wide rose spray Optional - Z suffix denotes special packaging as an option [34] Includes locking stop valve assembly.
[1] Z - Special packaging
Pre-Rinse Hose Assembly[1] [Q]
KC50-Y004-20 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-20U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-26 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-26U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-44 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-44U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-60 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-60U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-72 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-72U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y004-96 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
KC50-Y004-96U Commercial Pre-Rinse Hose Assembly w/ Grip and Hose adapters[G]
KC50-Y010-20 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-26 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-44 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-60 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-72 Commercial Pre-Rinse Hose (No Grip)
KC50-Y010-96 Commercial Pre-Rinse Hose (No Grip)
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
[1] Z - Special packaging [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
Vacuum Breakers[1]
KL50-X137 Atmospheric Vacuum Breaker 3/8" NPT[G]
KL50-X138 Atmospheric Vacuum Breaker 1/2" NPT[G]
KL50-X138-S-SD S/S Vac Breaker 1/2"NPT-Severe Duty[G]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act.
[1] Z - Special packaging
Valves[1] [15]
KL24-Y002 Stop Valve, Cold[G] [Q]
KL24-Y003 Stop Valve, Hot[G] [Q]
KL41-Y006 Cold Valve Assembly[G] [Q]
KL41-Y006-CV Hot Valve Assembly (Ceramic)[G] [Q]
KL41-Y007 Hot Valve Assembly[G] [Q]
KL41-Y007-CV Hot Valve Assembly (Ceramic)[G] [Q]
KL50-Y006-CCV Cold Valve Assembly with Built-In Check Valve[G] [Q]
KL50-Y007-CCV Hot Valve Assembly with Built-In Check Valve[G] [Q]
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act. [Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
[1] Z - Special packaging [15] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.

[7] (TLLXX) Body 
    TL11 - CP polished deck mount 4" Center
    TL13 - CP polished wall mount 8" Center
    TLL20 - CP polished brass single pantry faucet
    TLL50 - CP polished brass 4" deck mount faucet
    TLL57 - CP polished brass 4" deck mount faucet
    TLL61 - CP polished brass 8" deck mount faucet
    TLL 70 - CP polished brass single hole wall mount faucet
    (N) Inlet
    1 - Pre-Rinse
    4 - 4" CTR - CTR inlets
    8 - 8" CTR - CTR inlets
    9 - Single hole mount
    (x1) Valve
    0 - Full turn compression valve
    1 - Ceramic Valve
    (x2x3) Spout
    00 - 3" Gooseneck
    01 - 8" Gooseneck
    02 - 6" Gooseneck
    06 - 6" Straight spout
    08 - 8" Straight spout
    10 - 10" Straight spout
    12 - 12" Straight spout
    14 - 14" Straight spout
    16 - 16" Straight spout
    18 - 18" Double swivel spout
    20 - 20" Double swivel spout
    22 - 22" Double swivel spout
    24 - 24" Double swivel spout
    26 - 26" Double swivel spout
    28 - 28" Double swivel spout
    (y1) Spout style
    R - Rigid tubular spout
    S - Swivel tubular spout
    (y2) Aerator
    A - 0.5 GPM PCA spray vandal resistant
    B - 1.5 GPM MAX laminar antimicrobial & vandal resistant
    C - 0.5 GPM PCA spray
    D - 1.5 GPM MAX laminar antimicrobial
    E - 2.2 GPM MAX eerated stream
    F - 2.2 GPM aerated stream vandal resistant
    (y3) Handle
    1 - STD Lever w/Saniguard
    5 - STD Lever (tamper-proof)
[9] Pre-Rinse Assemblies using Power Pulse Spray Assembly will follow the format
    TLPXX-Nx1x2x3-y1y2y3y4y5 where:
    XX - 13, 20, 50, 57, 61, 70
    N - 1 (Pre-Rinse)
    x1 - 0 (Full Turn Compression Valve), 1 (1/4 Turn Ceramic w/ Check Valve)     
    x2x3 - 00 (Standard  - Default)
           L1 (.45 GPM Power Pulse spray)
           L2 (.65 GPM Power Pulse spray)
           L3 (.74 GPM Power Pulse spray)
           L4 (1.05 GPM Power Pulse spray)
    -yyy or yyyyy - BR - w/ Wall Bracket
                    (Blank)  - w/o Wall Bracket
                    AF1  - Add-on Faucet w/6” Spout
                    AF2  - Add-on Faucet w/8” Spout
                    AF3  - Add-on Faucet w/10” Spout
                    AF4  - Add-on Faucet w/12” Spout
                    AF5  - Add-on Faucet w/14” Spout
                    AF6  - Add-on Faucet w/16” Spout
                    AF7  - Add-on Faucet w/18” Spout
                    MK  - Mounting Kit
                    01 to 99  - Customer Code
[11] Elevated Swing Spout Assemblies follow the format KLnn-X1X2X3X4: 
     nn   - 52, 58, 62, or 65 
     X1   - 9, 4, or 8 
     X2   - 0 or 1 
     X3X4 - 06, 08, 10, 12, 14, 16, or 18
[12] ADD-ON Faucets w/ Spout follow the format KL55-70xx 
     xx - 06, 08, 10, 12, 14, 16, or 18
[31] The KL22-0010 Dipper Well Faucet Handle Repair Kit meets the reduced Q test statistic
     criteria of 0.5 µg for lead per Section 9.5.1.1 of NSF/ANSI/CAN 61.
[35] KL54-XXXX-YYY Series
     BODY KXXX:
     KL54 = CP POLISHED LOW LEAD BRASS SPLASH MOUNT FAUCET BODY WITH ADJUSTABLE SPOUT OUTLET
     
     1st X INLET:
     6 = 1” (25mm) OFFSET SUPPLY INLETS – KL60-Y005
     7 = 1/2” (13mm) OFFSET SUPPLY INLETS – KL60-Y004
     8 = STANDARD SUPPLY INLETS – KL60-Y006
     
     2nd X VALVE:
     0 = 1/4 TURN STANDARD ENCORE® COMPRESSION VALVE W/BUILT IN CHECK
     1 = 1/4 TURN CERAMIC VALVE W/ INLINE CHECK VALVE
     2 = SELF CLOSING ADJUSTABLE METERING VALVE
     
     3rd and 4th X SPOUT:
     00 = 3-1/2” (89mm) GOOSENECK
     01 = 8-1/2” (216mm) GOOSENECK
     02 = 6” (152mm) GOOSENECK
     06 = 6” (152mm) TUBULAR OR CAST SWING SPOUT
     08 = 8” (203mm) TUBULAR SWING SPOUT
     10 = 10” (254mm) TUBULAR SWING SPOUT
     12 = 12” (305mm) TUBULAR SWING SPOUT
     14 = 14” (356mm) TUBULAR SWING SPOUT
     16 = 16” (406mm) TUBULAR SWING SPOUT
     18A = 18” (457mm) TUBULAR SWING SPOUT
     18 = 18” (457mm) DOUBLE JOINTED SWING SPOUT
     24 = 24” (609mm) DOUBLE JOINTED SWING SPOUT
     
     1st Y SPOUT STYLE:
     S = ADJUSTABLE SPOUT
     R = RIGID TUBULAR SPOUT
     T = CAST TUBULAR SPOUT (6” OR 8” ONLY)
     
     2nd Y AERATOR:
     A = 0.5 GPM PCA SPRAY VANDAL RESISTANT
     B = 1.5 GPM MAX LAMINAR VANDAL RESISTANT
     C = 0.5 GPM PCA SPRAY
     D = 1.5 GPM MAX LAMINAR
     E = 2.2 GPM MAX AERATED STREAM
     F = 2.2 GPM MAX AERATED STREAM VANDAL RESISTANT
     G = .35 GPM PCA SPRAY (MALE)
     H = 2.2 GPM MAX AERATED STREAM VANDAL & HOSE RESISTANT
     J = .35 GPM PCA SPRAY
     K = .35 GPM PCA SPRAY (MALE) VANDAL RESISTANT
     L = .35 GPM PCA SPRAY VANDAL RESISTANT
     M = 1.0 GPM PCA LAMINAR FLOW
     S = 6.0 GPM MAX WIDE ROSE SPRAY
     
     3rd Y HANDLE:
     1 = STANDARD ENCORE® LEVER
     2 = CROSS
     4 = 4” (102mm) WRIST BLADE
     5 = STANDARD LEVER W/TAMPER PROOF SCREW
     6 = 6” (152mm) WRIST BLADE
     7 = 4” (102mm) WRIST BLADE W/ TAMPER PROOF SCREW
     8 = 6” (152mm) WRIST BLADE W/TAMPER PROOF SCREW
[42] KL74-XXXX-YYY Series
     BODY KXXX:
     KL74 = CP POLISHED LOW LEAD BRASS SINGLE HOLE BASE
     
     1st X INLET:
     9 = SINGLE ½”NPSM INTEGRAL CAST INLETS
     
     2nd X VALVE:
     0 = 1/4 TURN STANDARD ENCORE® COMPRESSION VALVE W/BUILT IN CHECK
     1 = 1/4 TURN CERAMIC VALVE W/ INLINE CHECK VALVE
     
     3rd and 4th X SPOUT:
     00 = 3-1/2” (89mm) GOOSENECK
     01 = 8-1/2” (216mm) GOOSENECK
     02 = 6” (152mm) GOOSENECK
     06 = 6” (152mm) TUBULAR OR CAST SWING SPOUT
     08 = 8” (203mm) TUBULAR SWING SPOUT
     10 = 10” (254mm) TUBULAR SWING SPOUT
     12 = 12” (305mm) TUBULAR SWING SPOUT
     14 = 14” (356mm) TUBULAR SWING SPOUT
     16 = 16” (406mm) TUBULAR SWING SPOUT
     18A = 18” (457mm) TUBULAR SWING SPOUT
     18 = 18” (457mm) DOUBLE JOINTED SWING SPOUT
     24 = 24” (609mm) DOUBLE JOINTED SWING SPOUT
     
     1st Y SPOUT STYLE:
     S = ADJUSTABLE SPOUT
     R = RIGID TUBULAR SPOUT
     T = CAST TUBULAR SPOUT (6” OR 8” ONLY)
     
     2nd Y AERATOR:
     A = 0.5 GPM PCA SPRAY VANDAL RESISTANT
     B = 1.5 GPM MAX LAMINAR VANDAL RESISTANT
     C = 0.5 GPM PCA SPRAY
     D = 1.5 GPM MAX LAMINAR
     E = 2.2 GPM MAX AERATED STREAM
     F = 2.2 GPM MAX AERATED STREAM VANDAL RESISTANT
     G = .35 GPM PCA SPRAY (MALE)
     H = 2.2 GPM MAX AERATED STREAM VANDAL & HOSE RESISTANT
     J = .35 GPM PCA SPRAY
     K = .35 GPM PCA SPRAY (MALE) VANDAL RESISTANT
     L = .35 GPM PCA SPRAY VANDAL RESISTANT
     M = 1.0 GPM PCA LAMINAR FLOW
     S = 6.0 GPM MAX WIDE ROSE SPRAY
     
     3rd Y HANDLE:
     1 = STANDARD ENCORE® LEVER
     2 = CROSS
     4 = 4” (102mm) WRIST BLADE
     5 = STANDARD LEVER W/TAMPER PROOF SCREW
     6 = 6” (152mm) WRIST BLADE
     7 = 4” (102mm) WRIST BLADE W/ TAMPER PROOF SCREW
     8 = 6” (152mm) WRIST BLADE W/TAMPER PROOF SCREW
NOTE:: Products Listed under the category of Commerical Kitchen and Bar Endpoint Devices are
      tested and Certified based upon their sole application being the delivery of water for
      high volume restaurant use or large batch food preparation.

Number of matching Manufacturers is 1
Number of matching Products is 959
Processing time was 1 seconds

NSF Product and Service Listings

Connect with NSF