NSF Product and Service Listings

[1] Betafine XL, Betafatine XL (LC)PP(GC)(EMC)(OR) variable key:
    
    LC: Length 
    9 to 40 inches
    
    GC: Grade
    002 - 0.2 MICRON
    005 - 0.5 MICRON
    010 - 1 MICRON
    025 - 2.5 MICRON
    050 - 5 MICRON
    100 - 10 MICRON
    200 - 20 MICRON
    400 - 40 MICRON
    700 - 70 MICRON
    
    EMC: End Modification
    B0 - 226 O'RINGS & SPEAR, NO REINFORCING RING
    B1 - 226 O'RINGS & SPEAR, POLYSULFONE RING
    B2 - 226 O'RINGS & SPEAR, STAINLESS STEEL RING
    C0 - 222 O'RINGS & SPEAR, NO REINFORCING RING
    C1 - 222 O'RINGS & SPEAR, POLYSULFONE RING
    C2 - 222 O'RINGS & SPEAR, STAINLESS STEEL RING
    D - DOUBLE OPEN END, FLAT GASKET
    F0 - 222 O'RING'S & FLAT CAP, NO REINFORCING RING
    F1 - 222 O'RINGS & FLAT CAP, POLYSULFONE RING
    F2 - 222 O'RINGS & FLAT CAP, STAINLESS STEEL RING
    R - END CAP WITH SPRING
    
    OR: O-ring:
    A - SILICONE
    M - EPDM
[2] Betafine XL products require a per-service flush at a flow rate of 2 to 3 gpm (gallons
    per minute) per each 10" of length for 5 minutes with deionized water.
    Betafine XL products are certified for a minimum daily filtrate generation of 1440
    gallons.
[3] Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) variable key:
    
    LC: Length
    5 to 40 inches
    
    GC: Grade designation
    005 - 0.5 µm
    010 - 1 µm
    020 - 2 µm
    030 - 3 µm
    050 - 5 µm
    100 - 10 µm
    200 - 20 µm
    300 - 30 µm
    400 - 40 µm
    500 - 50 µm
    700 - 70 µm
    
    P: Packaging option
    B - Bulk 
    S - Standard
    Z - Individual 
    
    EMC: End Modification
    B - SOE, 226, O-rings / spear
    C - SOE, 222 O-rings / spear
    D - DOE, flat gaskets
    F - SOE, 222 O-rings / Flat Cap
    L - Film sealed for use in CTG Klean
    M - SOE, 222 O-rings / flat cap, for 1ZMP HSG
    Y - SOE, 222 single O-ring and cap
    
    OR: Gasket/O-ring material
    A - Silicone
    M - EPDM
[4]  Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) is certified for a minimum daily
    filtration generation of 1440 gallons per 10" of length.
    
    Betapure NT-T, BetaPure NT (LC)T(GC)(P)(EMC)(OR) requires a per-service flush at 2 to 3
    gallons per minute (gpm) per 10" of length for 5 minutes.
[5] DF Series DFGxxxPPYZ size 1 requires a pre-service flush at 10 gallons per minute (gpm)
    for 5 minutes with deionized water.
    
    DF Series DFGxxxPPYZ size 2 requires a pre-service flush at 10 gallons per minute (gpm)
    for 10 minutes with deionized water.
[6] DF Series DFGxxxPPYZ size 1 is certified for a minimum daily filtrate generation of
    14,440 gallons.
    
    DF Series DFGxxxPPYZ size 2 is certified for a minimum daily filtrate generation of
    28,800 gallons.
[7] DF Series DFGxxxPPYZ variable key:
    
    xxx: Micron rating
    001 - 1 µm
    005 - 5 µm
    010 - 10 µm
    025 - 25 µm
    050 - 50 µm
    100 - 100 µm
    200 - 200 µm
    
    Y: Cartridge length
    1 - 16"" nominal (1 high)
    2 - 32"" nominal (2 high)
    
    Z: Connection style
    C - Open-cuno standard
    R - Closed-competitor"
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, FRP
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, FRP
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, SS
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, SS
    vessel is certified for a minimum daily flow of 60,000 gallons.
[2] Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x40 membrane fiber is
    certified for a minimum daily flow of 100,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x50 membrane fiber is
    certified for a minimum daily flow of 100,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x40 Membrane fiber  is
    certified for a minimum daily flow generation of 144,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x50 Membrane fiber is
    certified for a minimum daily flow generation of 144,000 gallons.
[3] Trade name Liqui-Cel™ EXF 4X28 Series Membrane Contactor with X50 Membrane Fiber is
    certified for a minimum daily flow generation of 5,760 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) variable key:
    
    LC: Length
    10 to 40 inches
    
    GC: Grade Designation
    Y - 1 µm
    B - 5 µm
    C - 10 µm
    F - 25 µm
    L - 50 µm
    Q - 75 µm
    CSW - 2 µm
    
    SC: Surface
    G - Grooved
    U - Ungrooved
    
    PC: Package 
    2 - Bulk / Polybag
    3 - Polybag & Labeled
    4 - Polybag & Labeled (Latina)
    5 - Bulk / No Polybag
    
    RC: Ring Support
    0 - None
    1 - Polysulfone
    2 - Stainless steel
    
    EMC: End Modification
    B - 226 O-RING/SPEAR
    C - 222 O-RING/SPEAR
    F - 222 O-RING/FLAT CAP
    N - DOE
    P - POLYPRO CORE EXTENDER
    R - CAP WITH SPRING
    
    OC: Gasket Material
    A - Silicone
    E - EPDM
[2] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
    daily filtrate generation of 1440 gallons per 10"" of length.
    Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
    flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10"" of length for 5 minutes
    with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z is certified for a minimum
    daily filtrate generation of 21,600 gallons per 10"" of length.
[2] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z requires a pre-service flush at
    10 gallons per minute (gpm) per 10"" of length for 10 minutes with deionized water.
[3] Certified for a minimum flow rate of 65,000 L/day.
[4] WW = Length of cartridge (in inches) - 40 or 60 PP = Polypropylene XXX = Removal rating
    0005 - 0.5 micron 001 - 1 micron 002 - 2 micron 005 - 5 micron 010 - 10 micron 015 - 15
    micron 025 - 25 micron 040 - 40 micron 070 - 70 micron Y = End o-ring type A - Silicone
    B - Fluorocarbon C - EPR D - Nitrile Z - Packaging option (number of filters per box) 01
    - 1 pack 04 - 4 pack
[5] High Flow Series Filter HF-10-PP-0005-X-01 is certified to 50 gpm flow rate with a 3.9 L
    Unit Volume
    High Flow Series Filter HF-40-PP-0005-X-01 is certified to 200 gpm flow rate with a 15.4
    L Unit Volume
    High Flow Series Filter HF-60-PP-0005-X-01 is certified to 300 gpm flow rate with a 23.2
    L Unit Volume
[6] High Flow Series Filter HF-10-PP-0005-X-01 where
    X = C (EPR) or D (nitrile)
    High Flow Series Filter HF-40-PP-0005-X-01 where
    X = C (EPR) or D (nitrile)
    High Flow Series Filter HF-60-PP-0005-X-01 where
    X = C (EPR) or D (nitrile)
[7] XX: Length 10 - 10" nominal, 40 - 40" nominal 60 - 60" nominal. YY: Material PP -
    Polypropylene. ZZZ: Micron Grade N05=5 micron nominal, A05=5 micron absolute, A10=10
    micron absolute, A20=20 micron absolute. Q - End o-ring Type A - Silicone D - Nitrile.
    Size:
[8] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
    flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
    with deionized water.
[9] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
    daily filtrate generation of 1440 gallons per 10" of length.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] LC denotes length (09, 10, 19, 20, 29, 30, 39, or 40); GC denotes micron rating (002,
     005, 010, 025, 050, 100, 200, 400, or 700); EMC denotes end treatment (B0, B1, B2, C0,
     C1, C2, D, F0, F1, or F2); OR denotes o-ring material (A, B, C, or D).

[1] Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, FRP
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, FRP
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x40 membrane fiber, SS
    vessel is certified for a minimum daily flow of 60,000 gallons.
    
    Trade name Liqui-Cel™ EXF-10x28 Series Membrane Contactor with x50 membrane fiber, SS
    vessel is certified for a minimum daily flow of 60,000 gallons
[2] Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x40 membrane fiber is
    certified for a minimum daily flow of 100,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x28 Series Membrane Contactor with x50 membrane fiber is
    certified for a minimum daily flow of 100,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x40 Membrane fiber is
    certified for a minimum daily flow of 144,000 gallons.
    
    Trade name Liqui-Cel™ EXF-14x40 Series Membrane Contactor with x50 Membrane fiber is
    certified for a minimum daily flow of 144,000 gallons.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.

[1] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z 30"" requires a
    pre-service flush at 10 gallons per minute (GPM) for 10 minutes.
    
    3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z 40"" requires a
    pre-service flush at 10 gallons per minute (GPM) for 15 minutes.
[2] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z variable key:
    
    Q: Construction
    B - Standard
    K - Reduced filter area
    
    RR: Length
    30 - 30 nominal
    40 - 40 nominal
    
    SS: Material
    PP - Polypropylene
    EE - Polyester
    
    XXX: Micron rating:
    001 = 1 um
    002 = 2 um
    005 = 5 um
    010 = 10 um
    015 = 15 um
    
    Y: Gasket material
    A - Silicone
    C - EPDM
    
    Z: Packaging
    1 - 1/case
    2 - 30/case
    3 - 37/case
[3] 3M™ High Flow HFM Series Filter Cartridges, 740-Q-RR-SS-XXX-Y-Z is certified for a
    minimum daily filtrate generation of 27,000 gallons per 30" of length.
[4] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z & 3M™ High Flow HFM Series
    Filter Cartridges, HFM-XX-YY-ZZZ-Q are certified for a minimum daily filtrate generation
    of 21,600 gallons per 10"" of length.
    
    3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z  & 3M™ High Flow HFM Series
    Filter Cartridges, HFM-XX-YY-ZZZ-Q requires a pre-service flush at 10 gallons per minute
    (gpm) per 10"" of length for 10 minutes with deionized water.
[5] 3M™ High Flow Series Filter Cartridges, HF-WW-PP-XXX-Y-Z variable key:
    
    WW: Length
    10 - 10"" nominal
    40 - 40"" nominal
    60 - 60"" nominal
    
    XXX: Grade
    001 - 1 um
    002 - 2 um
    005 - 5 um
    010 - 10 um
    015 - 15 um
    025 - 25 um
    040 - 40 um
    070 - 70 um
    
    Y: O-ring material
    A: Silicone
    B: Fluorocarbon
    C: EPR
    D: Nitrile
    
    Z: Packaged quantity
    01 - single pack
[6] 3M™ High Flow HFM Series Filter Cartridges, HFM-XX-YY-ZZZ-Q key:
    
    XX: Length
    10 - 10"" nominal
    40 - 40"" nominal
    60 - 60"" nominal
    
    YY: Construction
    PP - Polypropylene
    
    ZZZ: Grade
    N05 - 5 micron nominal (70 micron absolute)
    A05 - 5 micron absolute
    A10 - 10 micron absolute
    A20 - 20 micron absolute
    A40 - 40 micron absolute
[7] LC: Length
    10 to 40 inches
    
    GC: Grade Designation
    Y - 1 µm
    B - 5 µm
    C - 10 µm
    F - 25 µm
    L - 50 µm
    Q - 75 µm
    CSW - 2 µm
    
    SC: Surface
    G - Grooved
    U - Ungrooved
    
    PC: Package 
    2 - Bulk / Polybag
    3 - Polybag & Labeled
    4 - Polybag & Labeled (Latina)
    5 - Bulk / No Polybag
    
    RC: Ring Support
    0 - None
    1 - Polysulfone
    2 - Stainless steel
    
    EMC: End Modification
    B - 226 O-RING/SPEAR
    C - 222 O-RING/SPEAR
    F - 222 O-RING/FLAT CAP
    N - DOE
    P - POLYPRO CORE EXTENDER
    R - CAP WITH SPRING
    
    OC: Gasket Material
    A - Silicone
    E - EPDM
[8] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
    daily filtrate generation of 1440 gallons per 10"" of length.
[9] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
    flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
    with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.
[10] Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) variable key:
     
     XX: Length
     10 to 40 inches
     
     X: Grade Designation
     Y - 1 µm
     B - 5 µm
     
     A: Surface
     G - Grooved
     
     B: Package
     2 - Bulk / Polybag
     
     C: End Modification
     C- 222 O-RING/SPEAR
     F - 222 O-RING/FLAT CAP
     N - DOE
     1 - 222 O-RING/ PLASTIC SPRING
     R - PLASTIC SPRING
     
     D: Gasket
     A - Silicone
     N - None
[11] Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) is certified for a minimum daily
     filtrate generation of 1440 gallons per 10"" of length.
     
     Micro-Klean RW, Micro-Klean RW(XX)(X17)(A)(B)0(C)(D) requires a pre-service flush at a
     flow rate of 2 to 3 gallons per minute (gpm) per 10"" of length for 5 minutes with
     deionized water.

[1] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) variable key:
    
    LC: Length
    10 to 40 inches
    
    GC: Grade Designation
    Y - 1 µm
    B - 5 µm
    C - 10 µm
    F - 25 µm
    L - 50 µm
    Q - 75 µm
    CSW - 2 µm
    
    SC: Surface
    G - Grooved
    U - Ungrooved
    
    PC: Package 
    2 - Bulk / Polybag
    3 - Polybag & Labeled
    4 - Polybag & Labeled (Latina)
    5 - Bulk / No Polybag
    
    RC: Ring Support
    0 - None
    1 - Polysulfone
    2 - Stainless steel
    
    EMC: End Modification
    B - 226 O-RING/SPEAR
    C - 222 O-RING/SPEAR
    F - 222 O-RING/FLAT CAP
    N - DOE
    P - POLYPRO CORE EXTENDER
    R - CAP WITH SPRING
    
    OC: Gasket Material
    A - Silicone
    E - EPDM
[2] Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) is certified for a minimum
    daily filtrate generation of 1440 gallons per 10" of length.
    
    Micro-Klean RT, Micro-Klean RT (LC)(GC)16(SC)(PC(RC)(EMC)(OC) requires a pre-service
    flush at a flow rate of 2 to 3 gallons per minute (gpm) per 10" of length for 5 minutes
    with deionized water.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.