NSF Product and Service Listings

These NSF Official Listings are current as of Tuesday, December 23, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=04190&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Ingevity Corporation 
958 East Riverside Street
Covington, VA 24426 
United States 
540-969-3700
Visit this company's website


Facility : Wickliffe, KY

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Granular Activated Carbon[1]
FULL CUT AQUA NUCHAR® 8 x 60 mesh CLD 23 GAC
NUCHAR® AQUAGUARD FULLCUT 8 x 60 mesh CLD 23 GAC
NUCHAR® RGC FULLCUT NA CLD 23 GAC
NUCHAR® WV-B 30 8 x 30 mesh CLD 23 GAC 

[1] Carbon source is wood sawdust.

Powdered Activated Carbon[2]
AQUA NUCHAR® 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® AQUAGUARD® POWDER 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® MWC 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® RGC POWDER 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® SA 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® SA-20 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® SA-PCL 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® SA-T 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® SN 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® SN-20 2.5 µm - 150 µm CLD 23 PAC
Nuchar® MP 900 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SA-T 30 FULLCUT 8 x 60 mesh CLD 23 PAC
Nuchar® SA-T 30 PAC 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SA-T FULLCUT 8 x 60 mesh CLD 23 PAC
Nuchar® SA-T PAC 2.5 µm - 150 µm CLD 23 PAC 

[2] The carbon source is wood.


NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.


Facility : Covington, VA

Process Media

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Adsorption Media[2]
NUCHAR® SA-DW 41 µm CLD 23 OTHER
NUCHAR® SA-DW FC 3 mm CLD 23 OTHER 

[2] The carbon source is wood.

Granular Activated Carbon[1]
FULL CUT AQUA NUCHAR® 8 x 60 mesh CLD 23 GAC
NUCHAR® WV-B 1500 10X25 10 x 25 mesh CLD 23 GAC
NUCHAR® WV-B 1500 10X50 10 x 50 mesh CLD 23 GAC
NUCHAR® WV-B 30 8 x 30 mesh CLD 23 GAC 

[1] Carbon source is wood sawdust.

Powdered Activated Carbon[2]
Aqua Nuchar® 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® MWC 2.5 µm - 150 µm CLD 23 PAC
NUCHAR® SA-T 2.5 µm - 150 µm CLD 23 PAC
Nuchar® MP 900 2.5 µm - 150 µm CLD 23 PAC
Nuchar® RGC Powder 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SA 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SA-1500 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SA-20 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SA-PCL 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SA-T 30 FULLCUT 8 x 60 mesh CLD 23 PAC
Nuchar® SA-T 30 PAC 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SA-T FULLCUT 8 x 60 mesh CLD 23 PAC
Nuchar® SA-T PAC 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SN 2.5 µm - 150 µm CLD 23 PAC
Nuchar® SN-20 2.5 µm - 150 µm CLD 23 PAC 

[2] The carbon source is wood.


NOTE: Certified for water treatment plant applications.
      This product has not been evaluated for point of use applications.
Number of matching Manufacturers is 1
Number of matching Products is 40
Processing time was 0 seconds