NSF Product and Service Listings

These NSF Official Listings are current as of Saturday, May 28, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=07200&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Concrete Sealants, Inc. 
9325 State Route 201
Tipp City, OH 45371 
United States 
800-332-7325 
937-845-8776
Visit this company's website


Facility : Tipp City, OH

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Lubricants
ConLube CS-2000 >= 1/2" D. HOT LUB

Sealants
CS-231 >= 1/2" D. HOT MLTPL
CS-231-47B >= 1/2" D. HOT MLTPL
CS-235 >= 1/2" D. HOT MLTPL
CS-238 >= 1/2" D. HOT MLTPL
CS-5000 [1] D. HOT SLT
Conclay Seal >= 1/2" D. HOT MLTPL
Conseal CS-665 >= 1/2" D. HOT MLTPL
SuperSwell 47B >= 1/2" D. HOT MLTPL
WAM101 >= 1/2" D. HOT MLTPL

[1] Certified for a maximum SA/V of 0.25 sq. in./L in pipes and tanks.


Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Concrete Admixtures
ConBlock CDA[1] [2] CLD 23 CMNT

[1] Certified for a maximum use level of 40 oz/100 lbs cement.
[2] Certified for use in tanks 200 gallons and greater and pipes and fittings 4" and greater.

Concrete Sealers
ConBlock SH[3] [4] D. HOT SLT

[3] Certified for a post-cure of 18 hours at ambient temperature.
[4] Certified for use in tanks 5 gallons and greater.

Other
Conwrap PW[5] [6] D. HOT MLTPL

[5] Product version with polyethlene film and butyl rubber adhesive is not Certified.
[6] Certified for a maximum surface area to volume ratio of 1.7 square inches/L.


Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds