NSF Product and Service Listings

These NSF Official Listings are current as of Thursday, September 18, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0L190&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.


 
Fer-Pal Construction Ltd. 
9935, de Châteauneuf
Entrance 1 - Bureau 200 
Brossard, QC J4Z 3J8 
Canada 
800-263-7870 
450-652-9990
Visit this company's website


Facility : # 1 USA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Pipe Liner - Immediate Return to Service [G]
Aqua-Pipe 14+[1] [2] >= 14" CLD 23 MLTPL
Aqua-Pipe EX[1] [4] >= 4" CLD 23 MLTPL
Aqua-Pipe G3[1] [4] >= 4" CLD 23 MLTPL
Aqua-Pipe PU[1] [3] 4" - 12" CLD 23 MLTPL

[1] Evaluated for Immediate Return to Service.
[2] This product requires the following cure time, temperature, and flush:
    Day 1: Cure at 65° C and 10 psi water pressure for 2 hours when using APH01 or for 
           4 hours when using APH02, followed by a cool-down period of 18 hours at 
           ambient temperature.
    Day 2: Flush at 2.8 liters per minute for 24 hours at ambient temperature.
    Day 3: Cure for 24 hours at ambient temperature.
[3] This product requires the following cure time, temperature, and flush:
    
    Day 1: Cure at 65° C and 25 psi water pressure for 30 minutes when using APH01 or for 4
    hours 
           when using APH02, followed by a cool-down periodfor 18 hours at ambient
    temperature
    Day 2: Flush at 2.8 liters per minute for 24 hours at ambient temperature.
    Day 3: Cure for 48 hours at ambient temperature.
[4] This product requires the following cure time, temperature, and flush:
    
    Day 1: Cure at 65C and 25 psi water pressure for 30 minutes when using APH01 or 4 hours
    when 
           using APH02 followed by a cool-down period for 18 hours at ambient temperature.
    Day 2: Flush at 2.8 liters per minute for 24 hours at ambient temperature.
    Day 3: Cure for 24 hours at ambient temperature.
[G] Product is Certified to NSF/ANSI/CAN 372 and conforms with the lead content requirements
    for "lead free" plumbing as defined by California, Vermont, Maryland, and Louisiana
    state laws and the U.S. Safe Drinking Water Act.


Number of matching Manufacturers is 1
Number of matching Products is 4
Processing time was 0 seconds