NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, November 21, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=0X490&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Siam Fittings Co., Ltd. | |
| 100/1 Moo 2 | |
| Settakit 1 Road, Omnoi | |
| 74130 Krathumban Samutsakorn | |
| Thailand | |
| 66 2810 0832 5 | |
| Visit this company's website |
Facility : Samutsakorn, Thailand
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings [G] |
||||
| BF45 (BENDS FEMALE 45) | 1/2" - 4" | D. HOT | GALV | |
| BF90 (BENDS FEMALE 90) | 1/2" - 6" | D. HOT | GALV | |
| BMF 45 (BENDS M & F 45) | 1/2" - 6" | D. HOT | GALV | |
| BMF 90 (BENDS M & F 90) | 1/4" - 6" | D. HOT | GALV | |
| BU (BUSHINGS) | 1/4"x1/8" - 6"x5" | D. HOT | GALV | |
| CA (CAPS) | 1/8" - 6" | D. HOT | GALV | |
| CR (CROSSES) | 1/8" - 6" | D. HOT | GALV | |
| CU (UNIONS CONICAL BRASS SEAT) | 1/8" - 4" | D. HOT | GALV | |
| ERS (ECCENTRIC REDUCERS) | 3/4"x1/2" - 2"x1 1/2" | D. HOT | GALV | |
| F (ROUND FLANGES) | 1/2" - 6" | D. HOT | GALV | |
| FD (ROUND FLANGES "D") | 1/2" - 6" | D. HOT | GALV | |
| FF (FLOOR FLANGES) | 3/8" - 2" | D. HOT | GALV | |
| L45 (ELBOWS 45) | 1/8" - 6" | D. HOT | GALV | |
| L90 (ELBOWS 90) | 1/8" - 6" | D. HOT | GALV | |
| LCC (LONG COMPRESSION COUPLINGS) | 1/2" - 2" | D. HOT | GALV | |
| LF SA 45 deg Elbow CxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 45 deg Elbow CxM[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 45° Elbow CxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 45° Elbow FTGxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90 deg Drop Elbow CxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90 deg Drop Elbow CxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90 deg Elbow CxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90 deg Elbow CxM[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90 deg Hi-Ear Elbow CxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90° Drain Elbow CxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90° Elbow CxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90° Elbow FTGxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA 90° Hi-Ear Elbow CxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Adapter CxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Adapter CxM[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Baseboard Tee CxFxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Baseboard Tee FxFxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Blind Flanges, Class 150 [1] | 1/2" - 12" | D. HOT | MLTPL | |
| LF SA Blind Flanges, Class 300 [1] | 1/2" - 8" | D. HOT | MLTPL | |
| LF SA Bushing (CBU, EBU) [1] | 1/4"x1/8" - 4"x3" | D. HOT | MLTPL | |
| LF SA Cap (CCA, ECA) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Cap (CXCA, EXCA) [1] | 1/4" - 3" | D. HOT | MLTPL | |
| LF SA Cap C [1] | 1/4" - 6" | D. HOT | MLTPL | |
| LF SA Cast Bronze Nipples (7405,4721,558,18001,702,502,601,902,581,583,7402) [1] | 1/8" - 2" | D. HOT | MLTPL | |
| LF SA Companion Screwed Flange (SCPF, SEPF) [1] | 1/2" - 6" | D. HOT | MLTPL | |
| LF SA Companion Solder Flange (SCSF, SESF) [1] | 1/8" - 6" | D. HOT | MLTPL | |
| LF SA Countersunk Plug (CCP, ECP) [1] | 3/8" - 4" | D. HOT | MLTPL | |
| LF SA Coupling CxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Cross (CCR, ECR)[1] | 1/8" - 2 1/2" | D. HOT | MLTPL | |
| LF SA Cross (CXCR, EXCR) [1] | 1/4" - 2" | D. HOT | MLTPL | |
| LF SA Discharge Flanges (SJDF) [1] | 8 mm - 65 mm | D. HOT | MLTPL | |
| LF SA Drain Cap C[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Drain Coupling CxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Drop Tee CxCxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA EPC Tectite (T1, T12, T24, T25, T61, T30, TX21, TX21S, T3, T2) [1] | 1/8" - 2" | D. HOT | MLTPL | |
| LF SA Eccentric Coupling CxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Elbow 45° (CL 45 EL 45) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Elbow 45° (CXL 45 EXL 45) [1] | 1/4" - 2" | D. HOT | MLTPL | |
| LF SA Elbow 90° (CL 90 EL 90)[1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Elbow 90° (CXL 90 EXL 90) [1] | 1/4" - 3" | D. HOT | MLTPL | |
| LF SA Face Bushing (CFBU, EFBU) [1] | 1"x1/2" - 1"x3/4" | D. HOT | MLTPL | |
| LF SA Fitting Adapter FTGxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Fitting Adapter FTGxM[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Fitting Drain Coupling FTGxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Fitting Reducers [1] | 3/8"x1/4" - 4"x2" | D. HOT | MLTPL | |
| LF SA Fitting Tee FTGxCxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Floor Flange (CFF, EFF)[1] | 1/2" - 2" | D. HOT | MLTPL | |
| LF SA Flush Bushing FTGxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Flush Bushing FTGxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Hi-Ear Adapter CxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Hi-Ear Tee CxCxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Hi-Ear Tee CxCxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Lock Nut (CLN, ELN) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Male Adapter (BMA) [1] | 1/8" - 1 1/4" | D. HOT | MLTPL | |
| LF SA Nipples (CNI, ENI)[1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Plug (CP, EP) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Plug FTG [1] | 1/4" - 6" | D. HOT | MLTPL | |
| LF SA RT12 SPRAY GUN[1] | 1/4" - 4" | D. HOT | MLTPL | |
| LF SA Reducing 90° Elbows [1] | 3/8"x1/4" - 8"x6" | D. HOT | MLTPL | |
| LF SA Reducing Coupling (CRS, ERS) [1] | 1/4"x1/8" - 4"x3" | D. HOT | MLTPL | |
| LF SA Reducing Coupling CxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Reducing Cross (CRCR, ERCR) [1] | 3/4"x3/4" - 1/2"x1/2" | D. HOT | MLTPL | |
| LF SA Reducing Elbow 90° (CRL 90 ERL 90) [1] | 1/4"x 1/8" - 4"x3" | D. HOT | MLTPL | |
| LF SA Reducing Nipples (CRNI, ERNI)[1] | 1/8"x 1/8" - 4"x3" | D. HOT | MLTPL | |
| LF SA Reducing Tee (CRT, ERT) [1] | 1/4"x1/8" - 4"x3" | D. HOT | MLTPL | |
| LF SA Reducing Tees [1] | [2] | D. HOT | MLTPL | |
| LF SA Return Bend CxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA SFC Water Work Fittings (SELT, SELF, SEA, SENI, SEU, SEFC) [1] | 1/8" - 2" | D. HOT | MLTPL | |
| LF SA Socket, Coupling (CS, ES) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Socket, Coupling (CXS, EXS) [1] | 1/4" - 3" | D. HOT | MLTPL | |
| LF SA Solder Joint Flanges, Class 125 [1] | 3/8" - 12" | D. HOT | MLTPL | |
| LF SA Solder Joint Flanges, Class 150 [1] | 3/8" - 12" | D. HOT | MLTPL | |
| LF SA Solid Plug (CSP, ESP) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Street Elbow 45° (CSL 45 ESL 45)[1] | 1/8" - 2" | D. HOT | MLTPL | |
| LF SA Street Elbow 90° (CSL 90 ESL 90) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Street Elbow 90° (CXSL 90, EXSL 90) [1] | 1/4" - 2" | D. HOT | MLTPL | |
| LF SA Suction Flanges (SJSF) [1] | 8 mm - 50 mm | D. HOT | MLTPL | |
| LF SA Supply & Return Tee CxCxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Tee (CT, ET) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Tee (CXT, EXT) [1] | 1/4" - 3" | D. HOT | MLTPL | |
| LF SA Tee CxCxC [1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Tee CxCxF[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Tee CxCxM[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Tee CxFxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Tee CxMxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Tee FxMxC[1] | 1/4" - 8" | D. HOT | MLTPL | |
| LF SA Threaded Companion, Class 150 [1] | 1/2" - 12" | D. HOT | MLTPL | |
| LF SA Threaded Companion, Class 300 [1] | 1/2" - 8" | D. HOT | MLTPL | |
| LF SA Union (CU, EU) [1] | 1/8" - 4" | D. HOT | MLTPL | |
| LF SA Union (CXU, EXU) [1] | 1/8" - 2 1/2" | D. HOT | MLTPL | |
| LF SA Water Meter (Body Casing, Head Casing) [1] | 8 mm - 20 mm | D. HOT | MLTPL | |
| LN (LOCKNUTS) | 1/8" - 6" | D. HOT | GALV | |
| NI (NIPPLES) | 1/8" - 6" | D. HOT | GALV | |
| NOS (CROSS OVER) | 1/2" - 3/4" | D. HOT | GALV | |
| P (PLUGS) | 1/8" - 6" | D. HOT | GALV | |
| R L (REDUCING ELBOWS) | 1/4"x1/8" - 6"x4" | D. HOT | GALV | |
| R T (REDUCING TEES) | 1/4"x1/8" - 6"x5" | D. HOT | GALV | |
| RCR (REDUCING CROSSES) | 1.5"x1.25" - 2.5"x1.5" | D. HOT | GALV | |
| RCU (REDUCING UNIONS) | 3/4" x 1/2" | D. HOT | GALV | |
| RNI (REDUCING NIPPLES) | 3/8"x1/4" - 4"x3" | D. HOT | GALV | |
| RS (REDUCING COUPLINGS) | 1/4"x1/8" - 6"x5" | D. HOT | GALV | |
| S (COUPLINGS) | 1/8" - 6" | D. HOT | GALV | |
| SL45 (STREET ELBOWS 45) | 1/8" - 4" | D. HOT | GALV | |
| SL90 (STREET ELBOWS 90) | 1/8" - 6" | D. HOT | GALV | |
| SLCC (SHORT COMPRESSION COUPLINGS) | 1/2" - 3" | D. HOT | GALV | |
| SOL (SIDE OUTLET ELBOWS) | 1/8" - 2" | D. HOT | GALV | |
| SOT (SIDE OUTLET TEES) | 3/8" - 2" | D. HOT | GALV | |
| ST (SERVICE TEES) | 1/2" - 2" | D. HOT | GALV | |
| T (TEES) | 1/8" - 6" | D. HOT | GALV | |
| U (UNIONS FLAT SEAT WITHOUT GASKET) | 1/4" - 6" | D. HOT | GALV | |
| U340 (UNIONS CONICAL IRON TO IRON SEAT) | 1/2" - 2 1/2" | D. HOT | GALV | |
| U341 (UNIONS CONICAL IRON TO IRON SEAT,M & F) | 1/2" - 2" | D. HOT | GALV | |
| WN (WASTENUTS) | 1/2" - 2" | D. HOT | GALV | |
| X (EXTENSIONS) | 3/8" - 2" | D. HOT | GALV | |
| XHCA (CAPS) | 3/8" - 3" | D. HOT | GALV | |
| XHCU (UNIONS CONICAL BRASS SEAT) | 1/8" - 4" | D. HOT | GALV | |
| XHL45 (ELBOWS 45) | 1/4" - 4" | D. HOT | GALV | |
| XHL90 (ELBOWS 90) | 1/4" - 4" | D. HOT | GALV | |
| XHRS (REDUCING COUPLINGS) | 3/8"x1/4" - 4"x3" | D. HOT | GALV | |
| XHRT (REDUCING TEES) | 3/4"x3/4"x1/2" - 3"x3"x2" | D. HOT | GALV | |
| XHS (COUPLINGS) | 1/4" - 4" | D. HOT | GALV | |
| XHSL90 (STREET ELBOWS 90) | 1/4" - 4" | D. HOT | GALV | |
| XHT (TEES) | 1/4" - 4" | D. HOT | GALV | |
[1] This copper alloy is Certified by NSF to NSF/ANSI/CAN 61 for use in drinking water
supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may
require corrosion control to limit leaching of copper into the drinking water.
[2] 3/8" x 3/8" x 1/2" - 3" x 2" x 2"
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
“lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
laws and the U.S. Safe Drinking Water Act.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 138
Processing time was 0 seconds
