NSF Product and Service Listings
These NSF Official Listings are current as of Thursday, October 10, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=13630&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
Dow Silicones Corporation | |
P.O. Box 994 | |
Mail No. C03101 | |
Midland, MI 48686-0994 | |
United States | |
989-496-4000 |
Facility : Elizabethtown, KY
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Sealants |
||||
DOWSIL™ 732 Gasket Sealant, Aluminum | [1] | C. HOT | SLC | |
DOWSIL™ 732 Gasket Sealant, Black | [1] | C. HOT | SLC | |
DOWSIL™ 732 Gasket Sealant, Bronze | [1] | C. HOT | SLC | |
DOWSIL™ 732 Gasket Sealant, Clear | [1] | C. HOT | SLC | |
DOWSIL™ 732 Gasket Sealant, White | [1] | C. HOT | SLC | |
DOWSIL™ 732 Multi-Purpose, Aluminum | [1] | C. HOT | SLC | |
DOWSIL™ 732 Multi-Purpose, Black | [1] | C. HOT | SLC | |
DOWSIL™ 732 Multi-Purpose, Bronze | [1] | C. HOT | SLC | |
DOWSIL™ 732 Multi-Purpose, Clear | [1] | C. HOT | SLC | |
DOWSIL™ 732 Multi-Purpose, White | [1] | C. HOT | SLC | |
DOWSIL™ 748 Non-Corrosive Sealant | [2] | C. HOT | SLC | |
DOWSIL™ Appliance Sealant I - White | [1] | C. HOT | SLC | |
DOWSIL™ HVAC/R Sealant Aluminum | [1] | C. HOT | SLC | |
DOWSIL™ HVAC/R Sealant Black | [1] | C. HOT | SLC | |
DOWSIL™ HVAC/R Sealant Clear | [1] | C. HOT | SLC | |
DOWSIL™ HVAC/R Sealant White | [1] | C. HOT | SLC | |
[1] Certified for a maximum surface area to volume ratio of 14.5 sq. in./L. [2] Certified for a maximum surface area to volume ratio of 0.4 sq. in./L. |
Facility : Midland, MI
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Sealants |
||||
DOWSIL™ HM-2500 Assembly Sealant Clear | [1] | C. HOT | SLC | |
DOWSIL™ HM-2510 Assembly Sealant Clear | [1] | C. HOT | SLC | |
DOWSIL™ HM-2515 Assembly Sealant Clear | [1] | C. HOT | SLC | |
DOWSIL™ HM-2520 Assembly Sealant Clear | [1] | D. HOT | SLC | |
DOWSIL™ HM-2600 Silicone Assembly Sealant | [1] | C. HOT | SLC | |
[1] Certified for a maximum surface-to-area ratio of 14.5 sq. in./L. |
Facility : Wiesbaden, Germany
Joining and Sealing Materials
Water | Water | |||
Contact | Contact | |||
Trade Designation | Size | Temp | Material | |
Lubricants |
||||
SILASTIC™ 9900-50 Liquid Silicone Rubber Kit[1] | [2] | C. HOT | SLC | |
SILASTIC™ RBL-9200-50 Liquid Silicone Rubber Part A&B[1] | [2] | C. HOT | SLC | |
[1] This product has also been evaluated for use in Mechanical Plumbing Device applications with a maximum use restriction of 14.5 sq. in./L. Certified product requires a post-cure of 4 hours at 200°C. [2] Certified for a maximum surface area to volume ratio of 14.5 sq. in./L. |
Number of matching Manufacturers is 1
Number of matching Products is 23
Processing time was 0 seconds