NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=14800&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Delrin USA, LLC 
200 Powder Mill Road ESL 308
Wilmington, DE 19803 
United States 
302-999-4520


Facility : Washington, WV

Mechanical Plumbing Devices

Trade Designation      

Potable Water Materials*
Delrin 100 NC010[1]      
Delrin FG100 NC010[1]      
Delrin® 100P BK602[2]      
Delrin® 100P NC010[2]      
Delrin® 150 NC010[1]      
Delrin® 500 AF[1]      
Delrin® 500 NC010[1]      
Delrin® 500P BK602[2]      
Delrin® 500P NC010[2]      
Delrin® 511DP NC010[3]      
Delrin® 570 NC000[1]      
Delrin® FG100P NC010[2]      
Delrin® FG150 NC010[1]      
Delrin® FG500 NC010[1]      
Delrin® FG500P NC010[2]      
Delrin® FG511DP NC010[3]      
Delrin® FG911DP NC010[3]      
Delrin® RA500P NC010[2]      
Delrin® RAFG100 NC010[1]      
Delrin® RAFG150 NC010[1]      
Delrin® RAFG500P NC010[2]       

[1] Appurtenance end use.  Certified for a maximum surface area to volume ratio of 30 sq.
    in./L.
[2] Appurtenance end use.  Certified for a maximum surface area to volume ratio of 80 sq.
    in./L.
[3] Fitting and appurtenance end use.  Certified for a maximum surface area to volume ratio
    of 80 sq. in./L.


* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.


NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Potable Water Materials

    Water Water
    Contact Contact
Trade Designation End Use Temp Material

Potable Water Materials
Delrin® 100P BK602[2] A C. HOT POM
Delrin® 500 AF[1] A C. HOT POM
Delrin® 500P BK602[2] A C. HOT POM
Delrin® 570 NC000[1] A C. HOT POM
Delrin® FG100 NC010[1] A C. HOT POM
Delrin® FG100P NC010[2] A C. HOT POM
Delrin® FG150 NC010[1] A C. HOT POM
Delrin® FG500 NC010[1] A C. HOT POM
Delrin® FG500P NC010[2] A C. HOT POM
Delrin® FG511DP NC010[2] A,F C. HOT POM
Delrin® FG911DP NC010[2] A,F C. HOT POM
Delrin® RA500P NC010[2] A C. HOT POM
Delrin® RAFG100 NC010 A C. HOT POM
Delrin® RAFG150 NC010 [1] A C. HOT POM
Delrin® RAFG500P NC010[2] A C. HOT POM 

[1] Certified for a maximum surface area to volume ratio of 30 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 80 sq. in./L.


NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.


Facility : Dordrecht, The Netherlands

Mechanical Plumbing Devices

Trade Designation      

Potable Water Materials*
Delrin 100 NC010[1]      
Delrin FG100 NC010[1]      
Delrin® 100P BK602[2]      
Delrin® 100P NC010[2]      
Delrin® 150 NC010[1]      
Delrin® 500 NC010[1]      
Delrin® 500P BK602[2]      
Delrin® 500P NC010[2]      
Delrin® 511DP NC010[3]      
Delrin® FG100P NC010[2]      
Delrin® FG150 NC010[1]      
Delrin® FG500 NC010[1]      
Delrin® FG500P NC010[2]      
Delrin® FG511DP NC010[3]      
Delrin® FG911DP NC010[3]      
Delrin® RA500P NC010[2]      
Delrin® RAFG100 NC010[1]      
Delrin® RAFG150 NC010[1]      
Delrin® RAFG500P NC010 [2]       

[1] Appurtenance end use.  Certified for a maximum surface area to volume ratio of 30 sq.
    in./L.
[2] Appurtenance end use.  Certified for a maximum surface area to volume ratio of 80 sq.
    in./L.
[3] Fitting and appurtenance end use.  Certified for a maximum surface area to volume ratio
    of 80 sq. in./L.


* This product does not require a Q statistic. It is made from material or materials that
  do not require lead analysis when reviewed per NSF/ANSI/CAN Standard 61, Section 3.3.


NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.

Potable Water Materials

    Water Water
    Contact Contact
Trade Designation End Use Temp Material

Potable Water Materials
Delrin ® RAFG100 NC010[1] A C. HOT POM
Delrin® 100P BK602[2] A C. HOT POM
Delrin® 500P BK602[2] A C. HOT POM
Delrin® FG100 NC010[1] A C. HOT POM
Delrin® FG100P NC010[2] A C. HOT POM
Delrin® FG150 NC010[1] A C. HOT POM
Delrin® FG500 NC010[1] A C. HOT POM
Delrin® FG500P NC010[2] A C. HOT POM
Delrin® FG511DP NC010[2] A,F C. HOT POM
Delrin® FG911DP NC010[2] A,F C. HOT POM
Delrin® RA500P NC010[2] A C. HOT POM
Delrin® RAFG150 NC010 [1] A C. HOT POM
Delrin® RAFG500P NC010[2] A C. HOT POM 

[1] Certified for a maximum surface area to volume ratio of 30 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 80 sq. in./L.


NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.
Number of matching Manufacturers is 1
Number of matching Products is 68
Processing time was 0 seconds