NSF Product and Service Listings

These NSF Official Listings are current as of Friday, April 12, 2024 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=1B180&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.


 
Likuan Hardware Industrial Co., Ltd. 
No. 79-58, Liaocuo Lane
Lukang Township, Changhua Hsien 505 
Taiwan 
886 4 772 2201
Visit this company's website


Facility : Changhua Hsien, Taiwan

Mechanical Plumbing Devices

Trade Designation      

Hot Water Dispenser Components[3] [G] [Q]
NHC(1O)(3)(5)(6)(7)AB      
NP(1J)(2)(3)(4)(5)(6)-(7)      

[3] (1J) Faucet Type (HCD7, HCD11, HCD12)
         HCD7  - Body 11158 with 1359 spout
         HCD11 - Body 11302 with 11303 body and 13162 spout
         HCD12 - Body 11302 with 11336 body and 13162 spout
    (1O) Faucet type (D9, D10)
         D9  - Body 11299 w/spout 13159
         D10 - Body 11301 w/spout 13161
    (3) Material (N, S)
        N - Non Lead Brass Body and Spout
        S - Stainless Steel Body and Spout
    (4) Connector type (PI or Blank)
        PI    - Push-in connector
        Blank - Standard
    (5) Tube length (4" maximum)
        2     - 2"
        3     - 3"
        4     - 4"
        1.5   - 1.5"
        2.5   - 2.5"
        3.5   - 3.5"
        Blank - No Tube
    (6) Finish (Various Colors)
    (7) May include a maximum 12 character code for customer identification
        AB - Lead Free
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.

Faucets[1] [2] [G] [Q]
N(1)(2)(3)(4)(5)(6)-(7)-AB      
N(1)(2)(3)TA(4)(5)(6)-(7)-AB      
N(1A)(2)(3)AG(4)(5)(6)-(7)-AB      
N(1A)(2)(3)AGTA(5)(6)-(7)-AB      
N(1B)(2)(3)V(6)-(7)AB      
NC(1G)(2A)(3)(4)(5)(6)-(7)-AB      
NC(1G)(2A)(3)TA(5)(6)-(7)-AB      
NC(1H)(2A)(3)AG(4)(5)(6)-(7)-AB      
NC(1H)(2A)(3)AGTA(5)(6)-(7)-AB      
NC(1I)(2A)V(3)-(5)-(6)(7)AB      
NC(1Q)(3)(4)(5)(6)-(7)-AB      
NCP(1L)(2A)(3)(4)(5)(6)-(7)      
NCP(1L)(2A)(3)TA(5)(6)-(7)      
NCP(1M)(2A)(3)AG(4)(5)(6)-(7)      
NCP(1M)(2A)(3)AGTA(5)(6)-(7)      
NCP(1R)(2A)(3)(4)(5)(6)-(7)      
NCP(1R)(2A)(3)TA(4)(5)(6)-(7)      
NCP(1S)(2A)(3)AG(4)(5)(6)-(7)      
NCP(1S)(2A)(3)AGTA(4)(5)(6)-(7)      
NCP(1T)(2A)(3)(4)(5)(6)-(7)      
NCP(1T)(2A)(3)TA(5)(6)-(7)      
NCP(1U)(2A)(3)AG(4)(5)(6)-(7)      
NCP(1U)(2A)(3)AGTA(5)(6)-(7)      
NH(1Q)(3)(4)(5)(6)(7)AB      
NH(1R)V(3)-(5)-(6)(7)AB      
NHA(1N)(3)-(5)-(6)(7)AB      
NHC(1O)(3)-(5)-(6)(7)AB      
NKD(1P)(3)(5A)(6)-(7)AB      
NP(1D)(2)(3)(4)(5)(6)-(7)      
NP(1D)(2)(3)TA(5)(6)-(7)      
NP(1J)(2)(3)(4)(5)(6)-(7)      
NP(1K)(2)(3)AG(4)(5)(6)-(7)      
NP(1K)(2)(3)AGTA(5)(6)-(7)      
NSC(1N)(3)-(5)-(6)(7)AB      

[1] (1B) Faucet type (10, 30)
         10 - Body 1125
         30 - Body 1195
    (1P) Faucet type
         01   - Body 1130N W/Spout assembly 1310N
         02   - Body 1129N W/Spout assembly 1311N
         03   - Body 1164N W/Spout assembly 1316N
         04   - Body 1165N W/Spout assembly 1316N
         05B  - Body 11348N W/Spout assembly 13168N
         P02  - Body 11219 W/Spout assembly 1361N
         P03  - Body 11326 W/Spout assembly 1316N
         P07V - Body 11344 W/Spout assembly 13168N
         PS12 - Body 11297 W/Spout assembly 1367N
         P27  - Body 11260 W/Spout assembly 13118N
         P35  - Body 11260 W/Spout assembly 13169N
         P37  - Body 11260 W/Spout assembly 1360N
         P32  - Body 11219 W/Spout assembly 13168N
         P38  - Body 11219 W/Spout assembly 13146N
         P39  - Body 11219 W/Spout assembly 13172N
         P42  - Body 11293 W/Spout assembly 1390N"
    (1S) Faucet type (V6 or V8)
         V6 - Body number 11200
         V8 - Body number 11163-2 or body number 11215 with spout 1359 or 13130
    (1A) Faucet type (10, 30)
         10 - Body number 1124
         30 - Body number 1127
    (1O) Faucet Type ( D1, D2, D3 or D4) 
         D1 - Body number 1174 w/ spout number 1318 
         D2 - Body number 11133 w/ spout number 1337 
         D3 - Body number 11136 w/ spout number 1318 
         D4 - Body number 11139 and 11138-1 w/ spout number 1336
    (1N) Faucet Type (D1, D2, D3 or D4)
         D1 - Body number 1187 w/ spout number 1318
         D2 - Body number 11132 w/ spout number 1337
         D3 - Body number 11135 w/ spout number 13
         D4 - Body number 11138 w/ spout number 1336
    (1R)V Faucet Type (D1, D2 or D4)
          D1 - Body number 11247 w/ spout number 1318
          D2 - Body number 11244 w/ spout number 1337
          D4 - Body number 11246 w/ spout number 1336
    (1R) Faucet type (V1, V2, V6 or V8)
         V1 - Body number 11288 with 11287
         V2 - Body number 11288 with 11335
         V6 - Body 11188
         V8 - Body 11161-2 or body 11213
    (1I) Faucet Type (60, 70, 80, 88 or 90)
         60 - Body number 1157
         70 - Body number 1158
         80 - Body number 1156 w/ handle number 1602
         88 - Body number 1156 w/ handle number 1606
         90 - Body number 1155
    (1U) Faucet type (V60,V70,V71,V88,V90)
         V60 - Body 1183
         V70 - Body 1185
         V71 - Body 1185 w/ handle number 1648
         V88 - Body 1179
         V90 - Body 1181
    (1T) Faucet type (V60,V70,V71,V88,V90)
         V60 - Body 1193
         V70 - Body 1194
         V71 - Body 1194 w/handle 1648
         V88 - Body 1191
         V90 - Body 1192
    (1M) Faucet type (60, 70, 71, 80, 88, 90, A8, A1, H1, or S8)
         60 - Body 1183
         70 - Body 1185
         71 - Body 1185 w/handle 1648
         80 - Body 1179 w/handle 1602
         88 - Body 1179
         90 - Body 1181
         A8 - Body 11245
         A1 - Body 11349
         H1 - Body 11333
         S8 - Body 11163-2,11215
    (1L) Faucet type (60, 70, 71, 80, 88, 90, A1, A8, C1, C18, H1, or S8)
         60  - Body 1193
         70  - Body 1194
         71  - Body 1194 w/handle 1648
         80  - Body 1191 w/handle 1602
         88  - Body 1191 
         90  - Body 1192
         A1  - Body 11304
         A8  - Body 11248
         C1  - Body 11321
         C18 - Body 11337 w/spout 1359
         H1  – Body 11332
         S8  - Body 11161-2, 11213, 11315
    (1K) Faucet type (30, 40)
         30 - Body number 11162
         40 - Body number 11164
    (1J) Faucet Type (SCD7, FCD13)
         SCD7  - Body number 11158-PEI
         FCD13 - Body 11309
    (1D) Faucet type (30, 40)
         30 - Body number 1151
         40 - Body number 1197
[2] (1G) Faucet type (41, 51,511, 60, 70, 71, 80, 88 or 90,E0, F0, T01, T02, T03, T07, or
    T08)
         41  - Body number 1149
         51  - Body number 1150 w/ handle number 1621
         511 - Body number 1150 w/ handle number 1630
         60  - Body number 1119
         70  - Body number 1142 w/ handle number 1616
         71  - Body number 1142 w/ handle number 1648
         80  - Body number 1108 w/ handle number 1602
         88  - Body number 1108 w/ handle number 1606
         90  - body number 1118
         E0  - Body 1100370
         F0  - Body 1100371
         T01 - Body 1100381
         T02 - Body 1100387
         T03 - Body 1100388
         T07 - Body 1100393
         T08 - Body 1100387
    (1H) Faucet type (60, 70, 71, 80, 88 or 90, E0, F0, T01, T02, T03, T07, or T08)
         60  - Body number 1147
         70  - Body number 1148 w/ handle number 1616
         71  - Body number 1148 w/ handle number 1648
         80  - Body number 1146 w/ handle number 1602
         88  - Body number 1146 w/ handle number 1606
         90  - Body number 1145
         E0  - Body number 1100395
         F0  - Body number 1100396
         T01 - Body number 1100381
         T02 - Body number 1100387
         T03 - Body number 1100388
         T07 - Body number 1100408
         T08 - Body number 1100387
    (1Q) Faucet type (D1, D2, D3, D4)
         D1 - body number 1188 w/ spout 1318 & 1318S
         D2 - body number 11134 w/ spout 1337 & 1337S
         D3 - body number 11137 w/ spout 1318 & 1318S
         D4 - body number 11140 w/ spout 1336 & 1336S
    (1) Faucet type (10, 30)
        10 - body number 1104
        30 - body number 1114
    (2) Spout type (1, 2, 3, 4)
        1 - Assembly number 1308, 1348, 1308S, or 1348S
        2 - Assembly number 1309, 1309S
        3 - Assembly number 1338, 1346, 1338S, 1346S
        4 - Assembly number 1339, or 1339S"
    (2A) Spout type (0,1, 2, 3, 4, 5, or 8)
         0 - Assembly number 1300228, or 1300228S
         1 - Assembly number 1308, 1348, 1308S, or 1348S
         2 - Assembly number 1309, 1314, 1350, 1309S, 1314S, or 1350S
         3 - Assembly number 1301, 1307, 1313, 1346, 1301S, 1307S, 1313S, or 1346S
         4 - Assembly number 1304, 1347, 1304S, or 1347S
         5 - Assembly number 1305 or 1305S
         8 - Assembly number 1303, 1303S, 1300201, or 1300201S
    (3) Material (N, S)
        N - Non Lead Brass Body and Spout
        S - Stainless Steel Body and Spout
    (4) Connector type (PI or Blank)
        PI    - Push-in connector
        Blank - Standard
    (5) Tube length (4" maximum)
        2     - 2"
        3     - 3"
        4     - 4"
        1.5   - 1.5"
        2.5   - 2.5"
        3.5   - 3.5'"
        Blank - No Tube
    (6) Finish (Various Colors)
    (7) May include a maximum 12 character code for customer identification
        AB - Lead Free
[G] Product is Certified to NSF/ANSI 372 and conforms with the lead content requirements for
    “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state
    laws and the U.S. Safe Drinking Water Act.

    
[Q] This product meets the reduced Q test statistic criteria of 1 µg or 0.5 µg for lead per
    Section 9.5.1.1 of NSF/ANSI/CAN 61.


Number of matching Manufacturers is 1
Number of matching Products is 36
Processing time was 0 seconds