NSF Product and Service Listings

These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=1K710&Standard=061&


NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.

 
Ace Roto-Mold 
Division of Den Hartog Industries Inc.
4010 Hospers Drive South 
P.O. Box 425 
Hospers, IA 51238-0425 
United States 
800-342-3408 
712-752-8432
Visit this company's website


Facility : Hospers, IA

Protective (Barrier) Materials

    Water Water
  Water Contact Contact Contact
Trade Designation Size Restriction Temp Material

Tanks[1]
ACTXXXX-LP Cistern Tank [2] CLD 23 MLTPL
ARM-VVVVV [2] CLD 23 MLTPL
AST-XXXX-1W Cistern Tank [2] CLD 23 MLTPL
CBXXXX-YY Batch Tank - Cone Bottom [2] CLD 23 MLTPL
CBXXXX-YY Cone Bottom - Industrial Top [2] CLD 23 MLTPL
CBXXXX-YYY Cone Bottom Tank [2] CLD 23 MLTPL
CBXXXXX-YYY Cone Bottom Tank [2] CLD 23 MLTPL
DWXXXX-120 Double Wall Vertical Tank [2] CLD 23 MLTPL
DWXXXX-YY Double Wall Vertical Tank [2] CLD 23 MLTPL
EOXXXX-YY Elliptical Tank - Offset Lid [2] CLD 23 MLTPL
FMXXXX-YYS Leg Tank [2] CLD 23 MLTPL
FMXXXX-YYY Leg Tank [2] CLD 23 MLTPL
FS01600 Sectional Tank 1600 gal. CLD 23 MLTPL
FS01610 Flat Bottom Leg Tank 1610 gal. CLD 23 MLTPL
FSXXXXX-YY Leg Tank [2] CLD 23 MLTPL
FSXXXXX-YYW Leg Tank [2] CLD 23 MLTPL
GVXXXX-86 Gusset Top Tank [2] CLD 23 MLTPL
GVXXXXX-142 Vertical Polyethylene Storage Tank [2] CLD 23 MLTPL
HEDXXXX-YY Elliptical Tank [2] CLD 23 MLTPL
HEXXXX-YY Elliptical Tank [2] CLD 23 MLTPL
HZXXXXX-YY Horizontal Tank [2] CLD 23 MLTPL
IBFDXX-SET Inductor Tank [2] CLD 23 MLTPL
INFD085 Full Drain Inductor 85 gal. CLD 23 MLTPL
INFDXXX-YY Inductor Tank [2] CLD 23 MLTPL
INXXXX-YYYY Inductor Tank [2] CLD 23 MLTPL
LPXXXX-HT Holding Tank [2] CLD 23 MLTPL
LPXXXX-RT Low Profile Tank [2] CLD 23 MLTPL
LPXXXX-RT Rectangle Tank [2] CLD 23 MLTPL
OCXXXX-YY Batch Tank - Cone Bottom - Open Top [2] CLD 23 MLTPL
OCXXXX-YY Cone Bottom Tank - Open Top [2] CLD 23 MLTPL
OP0210-40 Open Top 210 gal. CLD 23 MLTPL
OPXXXX-YY Batch Tank- Vertical - Open Top [2] CLD 23 MLTPL
PCOXXX-YYZ PCO tank [2] CLD 23 MLTPL
PUXXXX-YY Pickup Tank [2] CLD 23 MLTPL
SBXXXXX Spot Spray [2] CLD 23 MLTPL
SP-XXXX-QQ Applicator Tank [2] CLD 23 MLTPL
SP-XXXXQQ Applicator Tank [2] CLD 23 MLTPL
SP002.8-RT Rectangle Tank – Flat Bottom 2.8 gal. CLD 23 MLTPL
SPBMXX-SQ# Specialty Tank [2] CLD 23 MLTPL
SPBMXXXX-RT Specialty Tank [2] CLD 23 MLTPL
SPXXXX-RT Total Drain Rectangular Tank [2] CLD 23 MLTPL
SPXXXX-SQ# Specialty Tank [2] CLD 23 MLTPL
SPXXXX-UU Rectangle Tank [2] CLD 23 MLTPL
SPXXXX-UU Specialty Tank [2] CLD 23 MLTPL
SPXXXX-VM Applicator Tank [2] CLD 23 MLTPL
SPXXXXX-UU Utility Tank [2] CLD 23 MLTPL
SSPUXXXX-70 Pickup Tank [2] CLD 23 MLTPL
VTXXXX-YY Batch Tank- Vertical [2] CLD 23 MLTPL
VTXXXXX-YYY [2] CLD 23 MLTPL
VTXXXXX-YYYY Vertical Polyethylene Storage Tank [2] CLD 23 MLTPL
WOXXXX-VT Water Only Tank [2] CLD 23 MLTPL 

[1] Certified for the following tank/component combinations:
    3/4" fittings/fitting gaskets shall only be used with tanks greater than or equal to 2.8
    gallons.
    1" fittings/fitting gaskets shall only be used with tanks greater than or equal to 3
    gallons.
    1-1/4" and 1-1/2" fittings/fitting gaskets shall only be used with tanks greater than or
    equal to 4 gallons.
    2" fittings/fitting gaskets shall only be used with tanks greater than or equal to 5
    gallons.
    3" fittings/fitting gaskets shall only be used with tanks greater than or equal to 95
    gallons.
    Siphon tubes shall only be used with tanks greater than or equal to 5 gallons.
[2] The trade names include product information represented by alphanumeric code, denoted as
    follows:										
    XXXX, XXXXX, XXXXXX: Tank volume in gallons (2.8 gallons and greater)										
    YY, YYY, YYYY diameter/width of tank in inches										
    QQ: Customer code										
    Z: Can be S (sump) or W (no sump)										
    UU: Can be RT (Rectangular Tank), SQ (Square Tank), 2P (2in lid), 5N (5 in lid), or any
    other two alphabetical code (customer code)										
    VVVVV: Part number										
    #: Lid size in inches.

Number of matching Manufacturers is 1
Number of matching Products is 51
Processing time was 0 seconds