NSF Product and Service Listings
These NSF Official Listings are current as of Friday, December 26, 2025 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=1U170&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings. Products certified to NSF/ANSI/CAN 61 comply with the health effects criteria in NSF/ANSI/CAN 600.
| Saudi Arabian Amiantit Company | |
| 1st Industrial Area |  |
| Post Box No. 589 | |
| Dammam 31421 | |
| Saudi Arabia | |
| 966 3 847 1500 |
Facility : Dammam, Saudi Arabia
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] |
||||
| AFIL* | 80 mm - 4000 mm | D. HOT | FRP | |
| Amipox RTR/GRE Reinforced Epoxy Mitered Fittings[3] | 80 mm -1200 mm | C. HOT | MLTPL | |
| Amipox RTR/GRE Reinforced Epoxy Molded Fittings[3] | 80 mm -1200 mm | C. HOT | MLTPL | |
| Bondstrand RTR / GRE Mitered Fittings | >= 1" | C. HOT | TSRE | |
| Bondstrand RTR / GRE Non-Mitered Fittings | >= 1" | C. HOT | TSRE | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[3] Certification includes the following fitting configurations: elbows, tees, laterals,
concentric reducers, eccentric reducers, and flanges.
|
||||
|
Pipe[1] |
||||
| AFIL | 150 mm - 4000 mm | D. HOT | MLTPL | |
| Bondstrand RTR / GRE Pipe | >= 1" | C. HOT | TSRE | |
| RTR/GRE Amipox Fiberglass Reinforced Pipe[2] | 80 mm - 1200 mm | C. HOT | TSRE | |
| RTR/GRE Amipox Glass Reinforced Epoxy Pipe[2] | 80 mm - 1200 mm | C. HOT | TSRE | |
| RTR/GRE Amipox Reinforced Thermosetting Resin Pipe[2] | 80 mm - 1200 mm | C. HOT | TSRE | |
[1] Only products bearing the NSF Mark on the product, product packaging, and/or
documentation shipped with the product are Certified.
[2] Certification includes the use of AM 48 Adhesive Kit.
|
||||
Facility : Jeddah, Saudi Arabia
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pipe |
||||
| AMIANTIT High Density Polyethylene Pipes | 20 mm-630 mm | D. HOT | HDPE | |
Number of matching Manufacturers is 1
Number of matching Products is 11
Processing time was 0 seconds
