NSF Product and Service Listings

These NSF Official Listings are current as of Monday, May 23, 2022 at 12:15 a.m. Eastern Time. Please contact NSF to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=34990&Standard=061&



NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings. Click here for the definitions of Water Contact Temperatures denoted in these Listings.


 
Parker O-Ring & Engineered Seals Division 
Parker Hannifin Corporation
2360 Palumbo Drive 
Lexington, KY 40509 
United States 
859-335-5154


Facility : # 2 H. Matamoros, Mexico

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
E1244-70[1] [2] C. HOT EPDM
E3609-70[1] [2] C. HOT EPDM
EA140-70 [3] C. HOT EPDM

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 0.65 sq. in./L.

O-Rings
E1244-70[1] [2] C. HOT EPDM
EA140-70 [3] C. HOT EPDM
EJ274-70[4] [5] [2] C. HOT EPDM

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 5 square inches/L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[3] Certified for a maximum surface area to volume ratio of 0.65 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.4 square inches/L.
[5] Only products bearing the NSF Mark on the product, product packaging, and/or
    documentation shipped with the product are Certified.

NOTE: NSF has not conducted production control audits at this facility. Product Listing is
      based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].

Mechanical Plumbing Devices

Trade Designation      

O-Rings[1]
Compound N0757-70      

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L in faucet
    applications.



Facility : Spartanburg, SC

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
E7126-80 [1] D. HOT EPDM
E7871-75 [2] C. HOT EPDM

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 0.27 sq. in./L.

O-Rings
EJ583-70 [1] CLD 23 EPDM

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.



Facility : Changhua Hsien, Taiwan

Joining and Sealing Materials

    Water Water
    Contact Contact
Trade Designation Size Temp Material

Gasket/Sealing Materials
Compound E1570 [1] C. HOT EPDM
Compound E1571 [1] C. HOT EPDM
Compound N1517 [2] C. HOT NBR

[1] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 0.5 sq. in./L.


Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds